Removed TeensyHID bootloader, per request from Paul at PJRC.

1 files changed, 0 insertions, 157 deletions

diff --git a/Bootloaders/TeensyHID/TeensyHID.c b/Bootloaders/TeensyHID/TeensyHID.c
deleted file mode 100644
index f2bb6df33..000000000
--- a/Bootloaders/TeensyHID/TeensyHID.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2010.
-              
-  dean [at] fourwalledcubicle [dot] com
-      www.fourwalledcubicle.com
-*/
-
-/*
-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this 
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
-  software without specific, written prior permission.
-
-  The author disclaim all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the TeensyHID bootloader. This file contains the complete bootloader logic.
- */
- 
-#include "TeensyHID.h"
-
-/** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run
- *  via a soft reset. When cleared, the bootloader will abort, the USB interface will shut down and the application
- *  started via a forced watchdog reset.
- */
-bool RunBootloader = true;
-
-/** Main program entry point. This routine configures the hardware required by the bootloader, then continuously 
- *  runs the bootloader processing routine until instructed to soft-exit.
- */
-int main(void)
-{
-	/* Setup hardware required for the bootloader */
-	SetupHardware();
-	
-	/* Enable global interrupts so that the USB stack can function */
-	sei();
-
-	while (RunBootloader)
-	  USB_USBTask();
-	
-	/* Disconnect from the host - USB interface will be reset later along with the AVR */
-	USB_Detach();
-
-	/* Enable the watchdog and force a timeout to reset the AVR */
-	wdt_enable(WDTO_250MS);
-
-	for (;;);
-}
-
-/** Configures all hardware required for the bootloader. */
-void SetupHardware(void)
-{
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Relocate the interrupt vector table to the bootloader section */
-	MCUCR = (1 << IVCE);
-	MCUCR = (1 << IVSEL);
-
-	/* Initialize USB subsystem */
-	USB_Init();
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This configures the device's endpoints ready
- *  to relay data to and from the attached USB host.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	/* Setup HID Report Endpoint */
-	Endpoint_ConfigureEndpoint(HID_EPNUM, EP_TYPE_INTERRUPT,
-		                       ENDPOINT_DIR_IN, HID_EPSIZE,
-	                           ENDPOINT_BANK_SINGLE);
-}
-
-/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific
- *  control requests that are not handled internally by the USB library (including the HID commands, which are
- *  all issued via the control endpoint), so that they can be handled appropriately for the application.
- */
-void EVENT_USB_Device_UnhandledControlRequest(void)
-{
-	/* Handle HID Class specific requests */
-	switch (USB_ControlRequest.bRequest)
-	{
-		case REQ_SetReport:
-			Endpoint_ClearSETUP();
-			
-			/* Wait until the command has been sent by the host */
-			while (!(Endpoint_IsOUTReceived()));
-		
-			/* Read in the write destination index */
-			uint16_t PageIndex = Endpoint_Read_Word_LE();
-			
-			/* Check if the command is a program page command, or a start application command */
-			if (PageIndex == TEENSY_STARTAPPLICATION)
-			{
-				RunBootloader = false;
-			}
-			else
-			{
-				#if (FLASHEND > 0xFFFF)
-				uint32_t PageByteAddress = ((uint32_t)PageIndex << 8);
-				#else
-				uint16_t PageByteAddress = PageIndex;
-				#endif
-			
-				/* Erase the given FLASH page, ready to be programmed */
-				boot_page_erase(PageByteAddress);
-				boot_spm_busy_wait();
-				
-				/* Write each of the FLASH page's bytes in sequence */
-				#if (SPM_PAGESIZE == 128)
-				for (uint8_t PageByte = 0; PageByte < SPM_PAGESIZE; PageByte += 2)				
-				#else
-				for (uint16_t PageByte = 0; PageByte < SPM_PAGESIZE; PageByte += 2)				
-				#endif
-				{
-					/* Check if endpoint is empty - if so clear it and wait until ready for next packet */
-					if (!(Endpoint_BytesInEndpoint()))
-					{
-						Endpoint_ClearOUT();
-						while (!(Endpoint_IsOUTReceived()));
-					}
-
-					/* Write the next data word to the FLASH page */
-					boot_page_fill(PageByteAddress + PageByte, Endpoint_Read_Word_LE());
-				}
-
-				/* Write the filled FLASH page to memory */
-				boot_page_write(PageByteAddress);
-				boot_spm_busy_wait();
-			}
-
-			Endpoint_ClearOUT();
-
-			Endpoint_ClearStatusStage();
-			
-			break;
-	}
-}