Expand the documentation for each Bootloader to give sample usage instructions for the command line programmer utilities.

Fix typo in the HID class bootloader CLI programmer application usage instructions.

1 files changed, 20 insertions, 2 deletions

diff --git a/Bootloaders/HID/BootloaderHID.txt b/Bootloaders/HID/BootloaderHID.txt
index 51dceb831..d69582212 100644
--- a/Bootloaders/HID/BootloaderHID.txt
+++ b/Bootloaders/HID/BootloaderHID.txt
@@ -48,14 +48,32 @@
  *

  *  This bootloader enumerates to the host as a HID Class device, allowing for device FLASH programming through

  *  the supplied command line software, which is a modified version of Paul's TeensyHID Command Line loader code

- *  from PJRC, used with permission. This bootloader is delibertely non-compatible with the properietary HalfKay

- *  bootloader GUI; only the command line interface software accompanying this bootloader will work with it.

+ *  from PJRC (used with permission). This bootloader is deliberatley non-compatible with the properietary PJRC

+ *  HalfKay bootloader GUI; only the command line interface software accompanying this bootloader will work with it.

  *  

  *  Out of the box this bootloader builds for the USB1287, and will fit into 2KB of bootloader space for the

  *  Series 2 USB AVRs (ATMEGAxxU2, AT90USBxx2) or 4KB of bootloader space for all other models. If you wish to

  *  enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU values in the

  *  accompanying makefile.

  *

+ *  \section Sec_Installation Driver Installation

+ *

+ *  This bootloader uses the HID class driver inbuilt into all modern operating systems, thus no additional drivers

+ *  need to be supplied for correct operation.

+ *

+ *  \section Sec_HostApp Host Controller Application

+ *

+ *  Due to licensing issues, the supplied bootloader is compatible with the HalfKay bootloader protocol designed

+ *  by PJRC, but is non-compatible with the cross-platform loader GUI. A modified version of the open source

+ *  cross-platform TeensyLoader application is supplied, which can be compiled under most operating systems. The

+ *  command-line loader application should remain compatible with genuine Teensy boards in addition to boards using

+ *  this custom bootloader.

+ *

+ *  Once compiled, programs can be loaded into the AVR's FLASH memory through the following example command:

+ *  \code

+ *  hid_bootloader_cli -mmcu=at90usb1287 Mouse.hex

+ *  \endcode

+ *

  *  \section SSec_Options Project Options

  *

  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.