Better documentation for the ANSI terminal escape codes header.

Organise the current version changelog better to group core and non-core changes together.

2 files changed, 162 insertions, 140 deletions

diff --git a/LUFA/Drivers/Misc/TerminalCodes.h b/LUFA/Drivers/Misc/TerminalCodes.h
index 25037cc91..f6673bc81 100644
--- a/LUFA/Drivers/Misc/TerminalCodes.h
+++ b/LUFA/Drivers/Misc/TerminalCodes.h
@@ -63,143 +63,159 @@
 	/* Public Interface - May be used in end-application: */
 		/* Macros: */
 			#if !defined(DISABLE_TERMINAL_CODES)
-				/** Creates an ANSI escape sequence with the payload specified by "c".
+				/** Creates an ANSI escape sequence with the specified payload.
 				 *
-				 *  \param[in] c  Payload to encode as an ANSI escape sequence, a ESC_* mask.
+				 *  \param[in] EscapeSeq  Payload to encode as an ANSI escape sequence, a ESC_* mask.
 				 */
-				#define ANSI_ESCAPE_SEQUENCE(c)  "\33[" c
+				#define ANSI_ESCAPE_SEQUENCE(EscapeSeq)  "\33[" EscapeSeq
 			#else
-				#define ANSI_ESCAPE_SEQUENCE(c)
+				#define ANSI_ESCAPE_SEQUENCE(EscapeSeq)
 			#endif
 
 			/** \name Text Display Modifier Escape Sequences */
 			//@{
 			/** Turns on bold so that any following text is printed to the terminal in bold. */
-			#define ESC_BOLD_ON              ANSI_ESCAPE_SEQUENCE("1m")
+			#define ESC_BOLD_ON                     ANSI_ESCAPE_SEQUENCE("1m")
 
 			/** Turns on italics so that any following text is printed to the terminal in italics. */
-			#define ESC_ITALICS_ON           ANSI_ESCAPE_SEQUENCE("3m")
+			#define ESC_ITALICS_ON                  ANSI_ESCAPE_SEQUENCE("3m")
 
 			/** Turns on underline so that any following text is printed to the terminal underlined. */
-			#define ESC_UNDERLINE_ON         ANSI_ESCAPE_SEQUENCE("4m")
+			#define ESC_UNDERLINE_ON                ANSI_ESCAPE_SEQUENCE("4m")
 
 			/** Turns on inverse so that any following text is printed to the terminal in inverted colours. */
-			#define ESC_INVERSE_ON           ANSI_ESCAPE_SEQUENCE("7m")
+			#define ESC_INVERSE_ON                  ANSI_ESCAPE_SEQUENCE("7m")
 
 			/** Turns on strikethrough so that any following text is printed to the terminal with a line through the
 			 *  center.
 			 */
-			#define ESC_STRIKETHROUGH_ON     ANSI_ESCAPE_SEQUENCE("9m")
+			#define ESC_STRIKETHROUGH_ON            ANSI_ESCAPE_SEQUENCE("9m")
 
 			/** Turns off bold so that any following text is printed to the terminal in non bold. */
-			#define ESC_BOLD_OFF             ANSI_ESCAPE_SEQUENCE("22m")
+			#define ESC_BOLD_OFF                    ANSI_ESCAPE_SEQUENCE("22m")
 
 			/** Turns off italics so that any following text is printed to the terminal in non italics. */
-			#define ESC_ITALICS_OFF          ANSI_ESCAPE_SEQUENCE("23m")
+			#define ESC_ITALICS_OFF                 ANSI_ESCAPE_SEQUENCE("23m")
 
 			/** Turns off underline so that any following text is printed to the terminal non underlined. */
-			#define ESC_UNDERLINE_OFF        ANSI_ESCAPE_SEQUENCE("24m")
+			#define ESC_UNDERLINE_OFF               ANSI_ESCAPE_SEQUENCE("24m")
 
 			/** Turns off inverse so that any following text is printed to the terminal in non inverted colours. */
-			#define ESC_INVERSE_OFF          ANSI_ESCAPE_SEQUENCE("27m")
+			#define ESC_INVERSE_OFF                 ANSI_ESCAPE_SEQUENCE("27m")
 
 			/** Turns off strikethrough so that any following text is printed to the terminal without a line through
 			 *  the center.
 			 */
-			#define ESC_STRIKETHROUGH_OFF    ANSI_ESCAPE_SEQUENCE("29m")
+			#define ESC_STRIKETHROUGH_OFF           ANSI_ESCAPE_SEQUENCE("29m")
 			//@}
 			
 			/** \name Text Colour Control Sequences */
 			//@{
 			/** Sets the foreground (text) colour to black. */
-			#define ESC_FG_BLACK             ANSI_ESCAPE_SEQUENCE("30m")
+			#define ESC_FG_BLACK                    ANSI_ESCAPE_SEQUENCE("30m")
 
 			/** Sets the foreground (text) colour to red. */
-			#define ESC_FG_RED               ANSI_ESCAPE_SEQUENCE("31m")
+			#define ESC_FG_RED                      ANSI_ESCAPE_SEQUENCE("31m")
 
 			/** Sets the foreground (text) colour to green. */
-			#define ESC_FG_GREEN             ANSI_ESCAPE_SEQUENCE("32m")
+			#define ESC_FG_GREEN                    ANSI_ESCAPE_SEQUENCE("32m")
 
 			/** Sets the foreground (text) colour to yellow. */
-			#define ESC_FG_YELLOW            ANSI_ESCAPE_SEQUENCE("33m")
+			#define ESC_FG_YELLOW                   ANSI_ESCAPE_SEQUENCE("33m")
 
 			/** Sets the foreground (text) colour to blue. */
-			#define ESC_FG_BLUE              ANSI_ESCAPE_SEQUENCE("34m")
+			#define ESC_FG_BLUE                     ANSI_ESCAPE_SEQUENCE("34m")
 
 			/** Sets the foreground (text) colour to magenta. */
-			#define ESC_FG_MAGENTA           ANSI_ESCAPE_SEQUENCE("35m")
+			#define ESC_FG_MAGENTA                  ANSI_ESCAPE_SEQUENCE("35m")
 
 			/** Sets the foreground (text) colour to cyan. */
-			#define ESC_FG_CYAN              ANSI_ESCAPE_SEQUENCE("36m")
+			#define ESC_FG_CYAN                     ANSI_ESCAPE_SEQUENCE("36m")
 
 			/** Sets the foreground (text) colour to white. */
-			#define ESC_FG_WHITE             ANSI_ESCAPE_SEQUENCE("37m")
+			#define ESC_FG_WHITE                    ANSI_ESCAPE_SEQUENCE("37m")
 
 			/** Sets the foreground (text) colour to the terminal's default. */
-			#define ESC_FG_DEFAULT           ANSI_ESCAPE_SEQUENCE("39m")
+			#define ESC_FG_DEFAULT                  ANSI_ESCAPE_SEQUENCE("39m")
 
 			/** Sets the text background colour to black. */
-			#define ESC_BG_BLACK             ANSI_ESCAPE_SEQUENCE("40m")
+			#define ESC_BG_BLACK                    ANSI_ESCAPE_SEQUENCE("40m")
 
 			/** Sets the text background colour to red. */
-			#define ESC_BG_RED               ANSI_ESCAPE_SEQUENCE("41m")
+			#define ESC_BG_RED                      ANSI_ESCAPE_SEQUENCE("41m")
 
 			/** Sets the text background colour to green. */
-			#define ESC_BG_GREEN             ANSI_ESCAPE_SEQUENCE("42m")
+			#define ESC_BG_GREEN                    ANSI_ESCAPE_SEQUENCE("42m")
 
 			/** Sets the text background colour to yellow. */
-			#define ESC_BG_YELLOW            ANSI_ESCAPE_SEQUENCE("43m")
+			#define ESC_BG_YELLOW                   ANSI_ESCAPE_SEQUENCE("43m")
 
 			/** Sets the text background colour to blue. */
-			#define ESC_BG_BLUE              ANSI_ESCAPE_SEQUENCE("44m")
+			#define ESC_BG_BLUE                     ANSI_ESCAPE_SEQUENCE("44m")
 
 			/** Sets the text background colour to magenta. */
-			#define ESC_BG_MAGENTA           ANSI_ESCAPE_SEQUENCE("45m")
+			#define ESC_BG_MAGENTA                  ANSI_ESCAPE_SEQUENCE("45m")
 
 			/** Sets the text background colour to cyan. */
-			#define ESC_BG_CYAN              ANSI_ESCAPE_SEQUENCE("46m")
+			#define ESC_BG_CYAN                     ANSI_ESCAPE_SEQUENCE("46m")
 
 			/** Sets the text background colour to white. */
-			#define ESC_BG_WHITE             ANSI_ESCAPE_SEQUENCE("47m")
+			#define ESC_BG_WHITE                    ANSI_ESCAPE_SEQUENCE("47m")
 
 			/** Sets the text background colour to the terminal's default. */
-			#define ESC_BG_DEFAULT           ANSI_ESCAPE_SEQUENCE("49m")
+			#define ESC_BG_DEFAULT                  ANSI_ESCAPE_SEQUENCE("49m")
 			//@}
 
 			/** \name Cursor Positioning Control Sequences */
 			//@{
-			/** Sets the cursor position to the given line and column. */
-			#define ESC_CURSOR_POS(L, C)     ANSI_ESCAPE_SEQUENCE(#L ";" #C "H")
+			/** Saves the current cursor position so that it may be restored with \ref ESC_CURSOR_POS_RESTORE. */
+			#define ESC_CURSOR_POS_SAVE             ANSI_ESCAPE_SEQUENCE("s")
 
-			/** Moves the cursor up the given number of lines. */
-			#define ESC_CURSOR_UP(L)         ANSI_ESCAPE_SEQUENCE(#L "A")
+			/** Restores the cursor position to the last position saved with \ref ESC_CURSOR_POS_SAVE. */
+			#define ESC_CURSOR_POS_RESTORE          ANSI_ESCAPE_SEQUENCE("u")
 
-			/** Moves the cursor down the given number of lines. */
-			#define ESC_CURSOR_DOWN(L)       ANSI_ESCAPE_SEQUENCE(#L "B")
+			/** Sets the cursor position to the given line and column.
+			 *
+			 *  \param[in] Line    Line number to position the cursor at
+			 *  \param[in] Column  Column number to position the cursor at
+			 */
+			#define ESC_CURSOR_POS(Line, Column)    ANSI_ESCAPE_SEQUENCE(#Line ";" #Column "H")
 
-			/** Moves the cursor to the right the given number of columns. */
-			#define ESC_CURSOR_FORWARD(C)    ANSI_ESCAPE_SEQUENCE(#C "C")
+			/** Moves the cursor up the given number of lines.
+			 *
+			 *  \param[in] Lines  Number of lines to move the cursor position
+			 */
+			#define ESC_CURSOR_UP(Lines)            ANSI_ESCAPE_SEQUENCE(#Lines "A")
 
-			/** Moves the cursor to the left the given number of columns. */
-			#define ESC_CURSOR_BACKWARD(C)   ANSI_ESCAPE_SEQUENCE(#C "D")
+			/** Moves the cursor down the given number of lines.
+			 *
+			 *  \param[in] Lines  Number of lines to move the cursor position
+			 */
+			#define ESC_CURSOR_DOWN(Lines)          ANSI_ESCAPE_SEQUENCE(#Lines "B")
 
-			/** Saves the current cursor position so that it may be restored with \ref ESC_CURSOR_POS_RESTORE. */
-			#define ESC_CURSOR_POS_SAVE      ANSI_ESCAPE_SEQUENCE("s")
+			/** Moves the cursor to the right the given number of columns.
+			 *
+			 *  \param[in] Columns  Number of columns to move the cursor position
+			 */
+			#define ESC_CURSOR_FORWARD(Columns)     ANSI_ESCAPE_SEQUENCE(#Columns "C")
 
-			/** Restores the cursor position to the last position saved with \ref ESC_CURSOR_POS_SAVE. */
-			#define ESC_CURSOR_POS_RESTORE   ANSI_ESCAPE_SEQUENCE("u")
+			/** Moves the cursor to the left the given number of columns.
+			 *
+			 *  \param[in] Columns  Number of columns to move the cursor position
+			 */
+			#define ESC_CURSOR_BACKWARD(Columns)    ANSI_ESCAPE_SEQUENCE(#Columns "D")
 			//@}
 
 			/** \name Miscellaneous Control Sequences */
 			//@{
 			/** Resets any escape sequence modifiers back to their defaults. */
-			#define ESC_RESET                ANSI_ESCAPE_SEQUENCE("0m")
+			#define ESC_RESET                       ANSI_ESCAPE_SEQUENCE("0m")
 
 			/** Erases the entire display, returning the cursor to the top left. */
-			#define ESC_ERASE_DISPLAY        ANSI_ESCAPE_SEQUENCE("2J")
+			#define ESC_ERASE_DISPLAY               ANSI_ESCAPE_SEQUENCE("2J")
 
 			/** Erases the current line, returning the cursor to the far left. */
-			#define ESC_ERASE_LINE           ANSI_ESCAPE_SEQUENCE("K")
+			#define ESC_ERASE_LINE                  ANSI_ESCAPE_SEQUENCE("K")
 			//@}
 
 #endif
diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index b399a75d6..66412324e 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -8,101 +8,107 @@
   *
   *  \section Sec_ChangeLogXXXXXX Version XXXXXX
   *  <b>New:</b>
-  *  - Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously
-  *    not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger)
-  *  - Moved the Pipe and Endpoint stream related code to two new USB library core source files EndpointStream.c and PipeStream.c
-  *  - Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number
-  *  - Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application
-  *    handling of USB Start of Frame events while in USB Host mode
-  *  - Added new PRNT_Host_BytesReceived(), PRNT_Host_ReceiveByte(), PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the
-  *    Print Host Class driver
-  *  - Added class specific descriptor alternative struct type defines with standard USB-IF element naming
-  *  - Added new project makefile template to the library and moved board driver stub files into in a new "CodeTemplates" directory
-  *  - Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett)
-  *  - Added board hardware driver support for the Kernel Concepts USBFOO development board
-  *  - Added board hardware driver support for the Linnix UDIP development board
-  *  - Added board hardware driver support for the Busware BUI development board
-  *  - Added board hardware driver support for the Arduino Uno development board
-  *  - Added board hardware driver support for the Busware CUL V3 868MHZ radio board (thanks to Dirk Tostmann)
-  *  - Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team)
-  *  - Added board hardware driver support for the Maximus board (thanks to the PSGroove team)
-  *  - Added board hardware driver support for the Minimus board (thanks to the PSGroove team)
-  *  - Added board hardware driver support for the Adafruit U4 breakout board
-  *  - Added default test tone generation mode to the Device mode AudioInput demos
-  *  - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management
-  *    tasks for each driver is called
-  *  - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda)
-  *  - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions
-  *  - Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_WRITE_SUPPORT compile time options to the
-  *    CDC class bootloader
-  *  - Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light)
+  *  - Core:
+  *    - Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously
+  *      not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger)
+  *    - Moved the Pipe and Endpoint stream related code to two new USB library core source files EndpointStream.c and PipeStream.c
+  *    - Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number
+  *    - Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application
+  *      handling of USB Start of Frame events while in USB Host mode
+  *    - Added new PRNT_Host_BytesReceived(), PRNT_Host_ReceiveByte(), PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the
+  *      Print Host Class driver
+  *    - Added class specific descriptor alternative struct type defines with standard USB-IF element naming
+  *    - Added new project makefile template to the library and moved board driver stub files into in a new "CodeTemplates" directory
+  *    - Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett)
+  *    - Added board hardware driver support for the Kernel Concepts USBFOO development board
+  *    - Added board hardware driver support for the Linnix UDIP development board
+  *    - Added board hardware driver support for the Busware BUI development board
+  *    - Added board hardware driver support for the Arduino Uno development board
+  *    - Added board hardware driver support for the Busware CUL V3 868MHZ radio board (thanks to Dirk Tostmann)
+  *    - Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team)
+  *    - Added board hardware driver support for the Maximus board (thanks to the PSGroove team)
+  *    - Added board hardware driver support for the Minimus board (thanks to the PSGroove team)
+  *    - Added board hardware driver support for the Adafruit U4 breakout board
+  *    - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management
+  *      tasks for each driver is called
+  *    - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda)
+  *    - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions
+  *  - Library Applications:
+  *    - Added default test tone generation mode to the Device mode AudioInput demos
+  *    - Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_WRITE_SUPPORT compile time options to the
+  *      CDC class bootloader
+  *    - Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light)
   *
   *  <b>Changed:</b>
-  *  - Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions
-  *    depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing
-  *    with basic code
-  *  - Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints
-  *  - Added missing DataflashManager_CheckDataflashOperation() function to the MassStorageKeyboard demo, removed redundant
-  *    SCSI_Codes.h file as these values are part of the MassStorage Class Driver
-  *  - Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel
-  *    does not exist on these chips (thanks to Marco)
-  *  - Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data
-  *    transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will
-  *    not break communications with the host by exceeding the maximum control request stage timeout period
-  *  - Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove
-  *    the need for extra casting inside the callback (thanks to Jonathan Kollasch)
-  *  - Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode
-  *  - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible
-  *    to free up the Start of Frame flag for interrupt use in the user application
-  *  - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany)
-  *  - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode correctly now defaults to UID selection mode
-  *  - Renamed and moved class driver common constant definitions to make the naming scheme more uniform
-  *  - Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive
-  *  - Changed configuration descriptor parser for all host mode projects and class drivers to ensure better compatibility with devices
-  *  - Moved the USB mode specifier constants into a new enum, so that they are semantically related to one another
-  *  - Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for
-  *    the given endpoint
-  *  - Better algorithm to extract and convert the internal device serial number into a string descriptor (if present)
-  *  - All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included
-  *  - All LowLevel demos changed to use the constants and types defined in the USB class drivers
-  *  - Changed AudioInput and AudioOutput demos to reload the next sample via an interrupt rather than polling the sample timer
-  *  - The MIDI class drivers now automatically flushes the MIDI interface when the MIDI class driver's USBTask() function is called
-  *  - Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times
-  *  - Changed ClassDriver MIDI demos to process all incomming events in a loop until the bank becomes empty rather than one at a time
-  *  - Changed LowLevel MIDI demos to only clear the incomming event bank once it has become empty to support packed event packets
-  *  - Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library
-  *    request handlers, not afterwards
+  *  - Core:
+  *    - Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions
+  *      depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing
+  *      with basic code
+  *    - Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove
+  *      the need for extra casting inside the callback (thanks to Jonathan Kollasch)
+  *    - Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode
+  *    - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode correctly now defaults to UID selection mode
+  *    - Renamed and moved class driver common constant definitions to make the naming scheme more uniform
+  *    - Moved the USB mode specifier constants into a new enum, so that they are semantically related to one another
+  *    - Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for
+  *      the given endpoint
+  *    - Better algorithm to extract and convert the internal device serial number into a string descriptor (if present)
+  *    - All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included
+  *    - The MIDI class drivers now automatically flushes the MIDI interface when the MIDI class driver's USBTask() function is called
+  *    - Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library
+  *      request handlers, not afterwards
+  *  - Library Applications:
+  *    - Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints
+  *    - Added missing DataflashManager_CheckDataflashOperation() function to the MassStorageKeyboard demo, removed redundant
+  *      SCSI_Codes.h file as these values are part of the MassStorage Class Driver
+  *    - Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel
+  *      does not exist on these chips (thanks to Marco)
+  *    - Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data
+  *      transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will
+  *      not break communications with the host by exceeding the maximum control request stage timeout period
+  *    - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible
+  *      to free up the Start of Frame flag for interrupt use in the user application
+  *    - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany)
+  *    - Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive
+  *    - Changed configuration descriptor parser for all host mode projects and class drivers to ensure better compatibility with devices
+  *    - All LowLevel demos changed to use the constants and types defined in the USB class drivers
+  *    - Changed AudioInput and AudioOutput demos to reload the next sample via an interrupt rather than polling the sample timer
+  *    - Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times
+  *    - Changed ClassDriver MIDI demos to process all incomming events in a loop until the bank becomes empty rather than one at a time
+  *    - Changed LowLevel MIDI demos to only clear the incomming event bank once it has become empty to support packed event packets
   *
   *  <b>Fixed:</b>
-  *  - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist
-  *    within the supplied report of a multiple report HID device
-  *  - Fixed MassStorage based demos and projects resetting the SCSI sense values before the command is executed, leading to
-  *    missed SCSI sense values when the host retrieves the sense key (thanks to Martin Degelsegger)
-  *  - Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped
-  *    in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger)
-  *  - Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control
-  *    request handler
-  *  - Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value
-  *  - Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev)
-  *  - Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts
-  *  - Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2
-  *  - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe
-  *  - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode
-  *  - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests
-  *  - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target
-  *  - Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev)
-  *  - Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver
-  *  - Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set
-  *  - Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used
-  *  - Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called
-  *  - Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules
-  *  - Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings
-  *  - Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured
-  *  - Fixed MIDI class driver send routines silently discarding packets if the endpoint or pipe is busy (thanks to Robin Green)
-  *  - Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full
-  *  - Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor
-  *  - Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics)
-  *  - Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode
+  *  - Core:
+  *    - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist
+  *      within the supplied report of a multiple report HID device
+  *    - Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped
+  *      in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger)
+  *    - Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev)
+  *    - Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts
+  *    - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe
+  *    - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode
+  *    - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests
+  *    - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target
+  *    - Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver
+  *    - Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set
+  *    - Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called
+  *    - Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings
+  *    - Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured
+  *    - Fixed MIDI class driver send routines silently discarding packets if the endpoint or pipe is busy (thanks to Robin Green)
+  *  - Library Applications:
+  *    - Fixed MassStorage based demos and projects resetting the SCSI sense values before the command is executed, leading to
+  *      missed SCSI sense values when the host retrieves the sense key (thanks to Martin Degelsegger)
+  *    - Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control
+  *      request handler
+  *    - Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value
+  *    - Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2
+  *    - Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev)
+  *    - Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used
+  *    - Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules
+  *    - Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full
+  *    - Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor
+  *    - Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics)
+  *    - Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode
   *
   *  \section Sec_ChangeLog100807 Version 100807
   *  <b>New:</b>