Speed up bit-banged USART code in the AVRISP project.

Fix project text files to refer to "project" instead of "demo".

9 files changed, 59 insertions, 55 deletions

diff --git a/Projects/AVRISP/AVRISP.txt b/Projects/AVRISP/AVRISP.txt
index 2de8dd2e7..35cf93770 100644
--- a/Projects/AVRISP/AVRISP.txt
+++ b/Projects/AVRISP/AVRISP.txt
@@ -6,9 +6,9 @@
  

 /** \mainpage AVRISP MKII Programmer Project

  *

- *  \section SSec_Compat Demo Compatibility:

+ *  \section SSec_Compat Project Compatibility:

  *

- *  The following list indicates what microcontrollers are compatible with this demo.

+ *  The following list indicates what microcontrollers are compatible with this project.

  *

  *  - Series 7 USB AVRs

  *  - Series 6 USB AVRs

@@ -17,7 +17,7 @@
  *

  *  \section SSec_Info USB Information:

  *

- *  The following table gives a rundown of the USB utilization of this demo.

+ *  The following table gives a rundown of the USB utilization of this project.

  *

  * <table>

  *  <tr>

@@ -67,7 +67,7 @@
  *  While this application can be compiled for USB AVRs with as little as 8KB of FLASH, for full functionality 16KB or more

  *  of FLASH is required. On 8KB devices, either ISP or PDI programming support can be disabled to reduce program size.

  *

- *

+ *  \section Sec_ISP ISP Connections

  *  Connections to the device for SPI programming (when enabled):

  *

  *  <table>

@@ -111,7 +111,7 @@
  *  <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n

  *  <b><sup>2</sup></b> <i>See \ref SSec_Options section</i>

  *

- *

+ *  \section Sec_PDI PDI Connections

  *  Connections to the device for PDI programming<b><sup>1</sup></b> (when enabled):

  *

  *  <table>

@@ -152,12 +152,12 @@
  *   </tr>

  *  </table>

  *

- *  <b><sup>1</sup></b> When PDI_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together

- *                      via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.

+ *  <b><sup>1</sup></b> <i>When PDI_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together

+ *                         via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i>

  *

  *  \section SSec_Options Project Options

  *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

+ *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.

  *

  *  <table>

  *   <tr>

diff --git a/Projects/AVRISP/Lib/NVMTarget.c b/Projects/AVRISP/Lib/NVMTarget.c
index 9402b2b8a..10a911ff3 100644
--- a/Projects/AVRISP/Lib/NVMTarget.c
+++ b/Projects/AVRISP/Lib/NVMTarget.c
@@ -182,7 +182,6 @@ bool NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t Re
  *  \param[in]  WriteCommand  Command to send to the device to write each memory byte

  *  \param[in]  WriteAddress  Start address to write to within the target's address space

  *  \param[in]  WriteBuffer   Buffer to source data from

- *  \param[in]  WriteSize     Number of bytes to write

  *

  *  \return Boolean true if the command sequence complete successfully

  */

diff --git a/Projects/AVRISP/Lib/PDITarget.c b/Projects/AVRISP/Lib/PDITarget.c
index 28df55021..1bbb4d577 100644
--- a/Projects/AVRISP/Lib/PDITarget.c
+++ b/Projects/AVRISP/Lib/PDITarget.c
@@ -45,9 +45,8 @@ volatile bool     IsSending;
 /** Software USART raw frame bits for transmission/reception. */

 volatile uint16_t SoftUSART_Data;

 

-/** Bits remaining to be sent or received via the software USART. */

-volatile uint8_t  SoftUSART_BitCount;

-

+/** Bits remaining to be sent or received via the software USART - set as a GPIOR for speed. */

+#define SoftUSART_BitCount   GPIOR2

 

 /** ISR to manage the software USART when bit-banged USART mode is selected. */

 ISR(TIMER1_COMPA_vect, ISR_BLOCK)

@@ -59,21 +58,13 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
 	if (!(SoftUSART_BitCount))

 	  return;

 

-	/* Check to see if the current clock state is on the rising or falling edge */

-	bool IsRisingEdge = (BITBANG_PDICLOCK_PORT & BITBANG_PDICLOCK_MASK);

-

-	if (IsSending && !IsRisingEdge)

-	{

-		if (SoftUSART_Data & 0x01)

-		  BITBANG_PDIDATA_PORT |=  BITBANG_PDIDATA_MASK;

-		else

-		  BITBANG_PDIDATA_PORT &= ~BITBANG_PDIDATA_MASK;		  

-

-		SoftUSART_Data >>= 1;

-		SoftUSART_BitCount--;

-	}

-	else if (!IsSending && IsRisingEdge)

+	/* Check to see if we are at a rising or falling edge of the clock */

+	if (BITBANG_PDICLOCK_PORT & BITBANG_PDICLOCK_MASK)

 	{

+		/* If at rising clock edge and we are in send mode, abort */

+		if (IsSending)

+		  return;

+		  

 		/* Wait for the start bit when receiving */

 		if ((SoftUSART_BitCount == BITS_IN_FRAME) && (BITBANG_PDIDATA_PIN & BITBANG_PDIDATA_MASK))

 		  return;

@@ -84,6 +75,20 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
 		SoftUSART_Data >>= 1;

 		SoftUSART_BitCount--;

 	}

+	else

+	{

+		/* If at falling clock edge and we are in receive mode, abort */

+		if (!IsSending)

+		  return;

+

+		if (SoftUSART_Data & 0x01)

+		  BITBANG_PDIDATA_PORT |=  BITBANG_PDIDATA_MASK;

+		else

+		  BITBANG_PDIDATA_PORT &= ~BITBANG_PDIDATA_MASK;		  

+

+		SoftUSART_Data >>= 1;

+		SoftUSART_BitCount--;

+	}

 }

 #endif

 

@@ -120,7 +125,7 @@ void PDITarget_EnableTargetPDI(void)
 	asm volatile ("NOP"::);

 

 	/* Fire timer compare ISR every 100 cycles to manage the software USART */

-	OCR1A   = 100;

+	OCR1A   = 80;

 	TCCR1B  = (1 << WGM12) | (1 << CS10);

 	TIMSK1  = (1 << OCIE1A);

 	

diff --git a/Projects/AVRISP/makefile b/Projects/AVRISP/makefile
index 23e27c52d..2b6a1e858 100644
--- a/Projects/AVRISP/makefile
+++ b/Projects/AVRISP/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, USER or blank for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

-BOARD = XPLAIN

+BOARD = USBKEY

 

 

 # Processor frequency.

diff --git a/Projects/Benito/Benito.txt b/Projects/Benito/Benito.txt
index 128fba37c..248ca7763 100644
--- a/Projects/Benito/Benito.txt
+++ b/Projects/Benito/Benito.txt
@@ -6,9 +6,9 @@
  

 /** \mainpage Benito Arduino Programmer Project

  *

- *  \section SSec_Compat Demo Compatibility:

+ *  \section SSec_Compat Project Compatibility:

  *

- *  The following list indicates what microcontrollers are compatible with this demo.

+ *  The following list indicates what microcontrollers are compatible with this project.

  *

  *  - Series 7 USB AVRs

  *  - Series 6 USB AVRs

@@ -17,7 +17,7 @@
  *

  *  \section SSec_Info USB Information:

  *

- *  The following table gives a rundown of the USB utilization of this demo.

+ *  The following table gives a rundown of the USB utilization of this project.

  *

  * <table>

  *  <tr>

@@ -58,7 +58,7 @@
  *

  *  \section SSec_Options Project Options

  *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

+ *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.

  *

  *  <table>

  *   <tr>

diff --git a/Projects/Magstripe/Magstripe.txt b/Projects/Magstripe/Magstripe.txt
index 19586277a..41c6b6e86 100644
--- a/Projects/Magstripe/Magstripe.txt
+++ b/Projects/Magstripe/Magstripe.txt
@@ -6,16 +6,16 @@
  

 /** \mainpage Denver Gingerich's USBSnoop Magnetic Card Reader Project

  *

- *  \section SSec_Compat Demo Compatibility:

+ *  \section SSec_Compat Project Compatibility:

  *

- *  The following list indicates what microcontrollers are compatible with this demo.

+ *  The following list indicates what microcontrollers are compatible with this project.

  *

  *  - AT90USB1287

  *  - AT90USB1286

  *

  *  \section SSec_Info USB Information:

  *

- *  The following table gives a rundown of the USB utilization of this demo.

+ *  The following table gives a rundown of the USB utilization of this project.

  *

  * <table>

  *  <tr>

@@ -87,17 +87,17 @@
  *   </tr>

  *  </table>

  *

- *  This project is based on the LUFA Keyboard demonstration application,

+ *  This project is based on the LUFA Keyboard projectnstration application,

  *  written by Denver Gingerich.

  *

  *  This application uses a keyboard HID driver to communicate the data collected

  *  a TTL magnetic stripe reader to the connected computer. The raw bitstream

  *  obtained from the magnetic stripe reader is "typed" through the keyboard

- *  driver as 0's and 1's. After every card swipe, the demo will send a return key.

+ *  driver as 0's and 1's. After every card swipe, the project will send a return key.

  *

  *  \section SSec_Options Project Options

  *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

+ *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.

  *

  *  <table>

  *   <tr>

diff --git a/Projects/MissileLauncher/MissileLauncher.txt b/Projects/MissileLauncher/MissileLauncher.txt
index 1dfff2f99..519410ef1 100644
--- a/Projects/MissileLauncher/MissileLauncher.txt
+++ b/Projects/MissileLauncher/MissileLauncher.txt
@@ -4,17 +4,17 @@
  *  documentation pages. It is not a project source file.

  */

  

-/** \mainpage Missile Launcher

+/** \mainpage David Fletcher's Missile Launcher

  *

- *  \section SSec_Compat Demo Compatibility:

+ *  \section SSec_Compat Project Compatibility:

  *

- *  The following list indicates what microcontrollers are compatible with this demo.

+ *  The following list indicates what microcontrollers are compatible with this project.

  *

  *  - Series 7 USB AVRs

  *

  *  \section SSec_Info USB Information:

  *

- *  The following table gives a rundown of the USB utilization of this demo.

+ *  The following table gives a rundown of the USB utilization of this project.

  *

  *  <table>

  *   <tr>

@@ -47,7 +47,7 @@
  *

  *  \section SSec_Options Project Options

  *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

+ *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.

  *

  *  <table>

  *   <tr>

diff --git a/Projects/USBtoSerial/USBtoSerial.txt b/Projects/USBtoSerial/USBtoSerial.txt
index f5378cced..10f0003c6 100644
--- a/Projects/USBtoSerial/USBtoSerial.txt
+++ b/Projects/USBtoSerial/USBtoSerial.txt
@@ -4,11 +4,11 @@
  *  documentation pages. It is not a project source file.

  */

  

-/** \mainpage USB to Serial Converter Project (via CDC-ACM class)

+/** \mainpage USB to Serial Converter Project

  *

- *  \section SSec_Compat Demo Compatibility:

+ *  \section SSec_Compat Project Compatibility:

  *

- *  The following list indicates what microcontrollers are compatible with this demo.

+ *  The following list indicates what microcontrollers are compatible with this project.

  *

  *  - Series 7 USB AVRs

  *  - Series 6 USB AVRs

@@ -17,7 +17,7 @@
  *

  *  \section SSec_Info USB Information:

  *

- *  The following table gives a rundown of the USB utilization of this demo.

+ *  The following table gives a rundown of the USB utilization of this project.

  *

  *  <table>

  *   <tr>

@@ -55,8 +55,8 @@
  *  error rates at the AVR's clock speed, data lengths other than 6, 7 or 8 bits,

  *  1.5 stop bits, parity other than none, even or odd).

  *  

- *  After running this demo for the first time on a new computer,

- *  you will need to supply the .INF file located in this demo

+ *  After running this project for the first time on a new computer,

+ *  you will need to supply the .INF file located in this project

  *  project's directory as the device's driver when running under

  *  Windows. This will enable Windows to use its inbuilt CDC drivers,

  *  negating the need for custom drivers for the device. Other

@@ -65,7 +65,7 @@
  *

  *  \section SSec_Options Project Options

  *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

+ *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.

  *

  *  <table>

  *   <tr>

diff --git a/Projects/XPLAINBridge/XPLAINBridge.txt b/Projects/XPLAINBridge/XPLAINBridge.txt
index e90a2d614..ec6eee7eb 100644
--- a/Projects/XPLAINBridge/XPLAINBridge.txt
+++ b/Projects/XPLAINBridge/XPLAINBridge.txt
@@ -6,15 +6,15 @@
  

 /** \mainpage XPLAIN UART Bridge Project

  *

- *  \section SSec_Compat Demo Compatibility:

+ *  \section SSec_Compat Project Compatibility:

  *

- *  The following list indicates what microcontrollers are compatible with this demo.

+ *  The following list indicates what microcontrollers are compatible with this project.

  *

  *  - AT90USB1287

  *

  *  \section SSec_Info USB Information:

  *

- *  The following table gives a rundown of the USB utilization of this demo.

+ *  The following table gives a rundown of the USB utilization of this project.

  *

  *  <table>

  *   <tr>

@@ -46,14 +46,14 @@
  *  host. When inserted, the device will enumerate as a regular COM port on the host, which can then be opened and data exchanged

  *  between the XMEGA and Host as if the XMEGA was connected directly to the host's serial port.

  *

- *  After running this demo for the first time on a new computer, you will need to supply the .INF file located in this demo

+ *  After running this project for the first time on a new computer, you will need to supply the .INF file located in this project

  *  project's directory as the device's driver when running under Windows. This will enable Windows to use its inbuilt CDC drivers,

  *  negating the need for custom drivers for the device. Other Operating Systems should automatically use their own inbuilt CDC-ACM

  *  drivers.

  *

  *  \section SSec_Options Project Options

  *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

+ *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.

  *

  *  <table>

  *   <tr>