diff options
Diffstat (limited to 'ps2_vusb/main.c')
| -rw-r--r-- | ps2_vusb/main.c | 111 |
1 files changed, 44 insertions, 67 deletions
diff --git a/ps2_vusb/main.c b/ps2_vusb/main.c index 359e28254..e692924e7 100644 --- a/ps2_vusb/main.c +++ b/ps2_vusb/main.c @@ -7,68 +7,50 @@ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) * This Revision: $Id: main.c 790 2010-05-30 21:00:26Z cs $ */ - -/* -This example should run on most AVRs with only little changes. No special -hardware resources except INT0 are used. You may have to change usbconfig.h for -different I/O pins for USB. Please note that USB D+ must be the INT0 pin, or -at least be connected to INT0 as well. - -We use VID/PID 0x046D/0xC00E which is taken from a Logitech mouse. Don't -publish any hardware using these IDs! This is for demonstration only! -*/ - #include <stdint.h> #include <avr/io.h> #include <avr/wdt.h> #include <avr/interrupt.h> /* for sei() */ -#include <util/delay.h> /* for _delay_ms() */ - #include <avr/pgmspace.h> /* required by usbdrv.h */ +#include <util/delay.h> /* for _delay_ms() */ #include "usbdrv.h" #include "usart_print.h" /* This is also an example for using debug macros */ -#include "ps2.h" #include "usb_keycodes.h" #include "matrix_skel.h" #include "keymap_skel.h" +#include "mousekey.h" +#include "keyboard.h" #include "layer.h" #include "print.h" #include "debug.h" #include "sendchar.h" -#include "keyboard.h" +#include "host.h" +#include "host_vusb.h" #include "timer.h" -/* ------------------------------------------------------------------------- */ -/* ----------------------------- USB interface ----------------------------- */ -/* ------------------------------------------------------------------------- */ - - - - - int main(void) { -uchar i; - -print_enable = true; -debug_enable = true; -timer_init(); -matrix_init(); - wdt_enable(WDTO_1S); /* Even if you don't use the watchdog, turn it off here. On newer devices, * the status of the watchdog (on/off, period) is PRESERVED OVER RESET! */ + /* RESET status: all port bits are inputs without pull-up. * That's the way we need D+ and D-. Therefore we don't need any * additional hardware initialization. */ odDebugInit(); - DBG1(0x00, 0, 0); /* debug output: main starts */ usbInit(); - usbDeviceDisconnect(); /* enforce re-enumeration, do this while interrupts are disabled! */ - i = 0; + + print_enable = true; + //debug_enable = true; + timer_init(); + matrix_init(); + + /* enforce re-enumeration, do this while interrupts are disabled! */ + usbDeviceDisconnect(); + uint8_t i = 0; while(--i){ /* fake USB disconnect for > 250 ms */ wdt_reset(); _delay_ms(1); @@ -78,49 +60,44 @@ matrix_init(); uint8_t fn_bits = 0; while (1) { /* main event loop */ - DBG1(0x02, 0, 0); /* debug output: main loop iterates */ wdt_reset(); usbPoll(); + host_vusb_keyboard_send(); -/* -static uint8_t code = 0; -code = ps2_host_recv(); -if (code) { - odDebug(0x05, &code, 1); -} -*/ matrix_scan(); - if (matrix_is_modified()) { - //matrix_print(); // too heavy on USART - fn_bits = 0; - report_swap(); - report_clear(); - for (int row = 0; row < matrix_rows(); row++) { - for (int col = 0; col < matrix_cols(); col++) { - if (!matrix_is_on(row, col)) continue; - - uint8_t code = layer_get_keycode(row, col); - if (code == KB_NO) { - // do nothing - } - else if (IS_MOD(code)) { - report_add_mod(MOD_BIT(code)); - } - else if (IS_KEY(code)) { - report_add_key(code); - } - else if (IS_FN(code)) { - fn_bits |= FN_BIT(code); - } - else { - debug("ignore keycode: "); debug_hex(code); debug("\n"); - } + fn_bits = 0; + keyboard_swap_report(); + keyboard_clear_report(); + mousekey_clear_report(); + for (int row = 0; row < matrix_rows(); row++) { + for (int col = 0; col < matrix_cols(); col++) { + if (!matrix_is_on(row, col)) continue; + + uint8_t code = layer_get_keycode(row, col); + if (code == KB_NO) { + // do nothing + } + else if (IS_MOD(code)) { + keyboard_add_mod(MOD_BIT(code)); + } + else if (IS_KEY(code)) { + keyboard_add_key(code); + } + else if (IS_FN(code)) { + fn_bits |= FN_BIT(code); + } + else if (IS_MOUSEKEY(code)) { + mousekey_decode(code); + } + else { + debug("ignore keycode: "); debug_hex(code); debug("\n"); } } } layer_switching(fn_bits); if (matrix_is_modified()) { - report_send(); + keyboard_send(); } + mousekey_send(); } } |