diff options
Diffstat (limited to 'lib/lufa/LUFA/Drivers/Misc')
| -rw-r--r-- | lib/lufa/LUFA/Drivers/Misc/AT45DB321C.h | 100 | ||||
| -rw-r--r-- | lib/lufa/LUFA/Drivers/Misc/AT45DB642D.h | 116 | ||||
| -rw-r--r-- | lib/lufa/LUFA/Drivers/Misc/RingBuffer.h | 308 | ||||
| -rw-r--r-- | lib/lufa/LUFA/Drivers/Misc/TerminalCodes.h | 231 |
4 files changed, 755 insertions, 0 deletions
diff --git a/lib/lufa/LUFA/Drivers/Misc/AT45DB321C.h b/lib/lufa/LUFA/Drivers/Misc/AT45DB321C.h new file mode 100644 index 000000000..e354ca47b --- /dev/null +++ b/lib/lufa/LUFA/Drivers/Misc/AT45DB321C.h @@ -0,0 +1,100 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Command constants for the Atmel AT45DB321C Dataflash. + * \copydetails Group_AT45DB321C + */ + +/** \ingroup Group_MiscDrivers + * \defgroup Group_AT45DB321C Atmel AT45DB321C Dataflash Commands - LUFA/Drivers/Misc/AT45DB321C.h + * \brief Command constants for the Atmel AT45DB321C Dataflash. + * + * Dataflash command constants for the Atmel AT45DB321C Dataflash IC. + * + * @{ + */ + +#ifndef __AT45DB321C_CMDS_H__ +#define __AT45DB321C_CMDS_H__ + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name Dataflash Status Values */ + //@{ + #define DF_STATUS_READY (1 << 7) + #define DF_STATUS_COMPMISMATCH (1 << 6) + #define DF_STATUS_SECTORPROTECTION_ON (1 << 1) + //@} + + /** \name Dataflash Commands */ + //@{ + #define DF_CMD_GETSTATUS 0xD7 + + #define DF_CMD_MAINMEMTOBUFF1 0x53 + #define DF_CMD_MAINMEMTOBUFF2 0x55 + #define DF_CMD_MAINMEMTOBUFF1COMP 0x60 + #define DF_CMD_MAINMEMTOBUFF2COMP 0x61 + #define DF_CMD_AUTOREWRITEBUFF1 0x58 + #define DF_CMD_AUTOREWRITEBUFF2 0x59 + + #define DF_CMD_MAINMEMPAGEREAD 0xD2 + #define DF_CMD_CONTARRAYREAD_LF 0xE8 + #define DF_CMD_BUFF1READ_LF 0xD4 + #define DF_CMD_BUFF2READ_LF 0xD6 + + #define DF_CMD_BUFF1WRITE 0x84 + #define DF_CMD_BUFF2WRITE 0x87 + #define DF_CMD_BUFF1TOMAINMEMWITHERASE 0x83 + #define DF_CMD_BUFF2TOMAINMEMWITHERASE 0x86 + #define DF_CMD_BUFF1TOMAINMEM 0x88 + #define DF_CMD_BUFF2TOMAINMEM 0x89 + #define DF_CMD_MAINMEMPAGETHROUGHBUFF1 0x82 + #define DF_CMD_MAINMEMPAGETHROUGHBUFF2 0x85 + + #define DF_CMD_PAGEERASE 0x81 + #define DF_CMD_BLOCKERASE 0x50 + + #define DF_CMD_SECTORPROTECTIONOFF ((char[]){0x3D, 0x2A, 0x7F, 0xCF}) + #define DF_CMD_SECTORPROTECTIONOFF_BYTE1 0x3D + #define DF_CMD_SECTORPROTECTIONOFF_BYTE2 0x2A + #define DF_CMD_SECTORPROTECTIONOFF_BYTE3 0x7F + #define DF_CMD_SECTORPROTECTIONOFF_BYTE4 0xCF + + #define DF_CMD_READMANUFACTURERDEVICEINFO 0x9F + //@} + + /** Manufacturer code for Atmel Corporation, returned by Atmel Dataflash ICs in response to the \c DF_CMD_READMANUFACTURERDEVICEINFO command. */ + #define DF_MANUFACTURER_ATMEL 0x1F + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/Misc/AT45DB642D.h b/lib/lufa/LUFA/Drivers/Misc/AT45DB642D.h new file mode 100644 index 000000000..76a7a5cb6 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/Misc/AT45DB642D.h @@ -0,0 +1,116 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Command constants for the Atmel AT45DB642D Dataflash. + * \copydetails Group_AT45DB642D + */ + +/** \ingroup Group_MiscDrivers + * \defgroup Group_AT45DB642D Atmel AT45DB642D Dataflash Commands - LUFA/Drivers/Misc/AT45DB642D.h + * \brief Command constants for the Atmel AT45DB642D Dataflash. + * + * Dataflash command constants for the Atmel AT45DB642D Dataflash IC. + * + * @{ + */ + +#ifndef __AT45DB642D_CMDS_H__ +#define __AT45DB642D_CMDS_H__ + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name Dataflash Status Values */ + //@{ + #define DF_STATUS_READY (1 << 7) + #define DF_STATUS_COMPMISMATCH (1 << 6) + #define DF_STATUS_SECTORPROTECTION_ON (1 << 1) + #define DF_STATUS_BINARYPAGESIZE_ON (1 << 0) + //@} + + /** \name Dataflash Commands */ + //@{ + #define DF_CMD_GETSTATUS 0xD7 + #define DF_CMD_POWERDOWN 0xB9 + #define DF_CMD_WAKEUP 0xAB + + #define DF_CMD_MAINMEMTOBUFF1 0x53 + #define DF_CMD_MAINMEMTOBUFF2 0x55 + #define DF_CMD_MAINMEMTOBUFF1COMP 0x60 + #define DF_CMD_MAINMEMTOBUFF2COMP 0x61 + #define DF_CMD_AUTOREWRITEBUFF1 0x58 + #define DF_CMD_AUTOREWRITEBUFF2 0x59 + + #define DF_CMD_MAINMEMPAGEREAD 0xD2 + #define DF_CMD_CONTARRAYREAD_LF 0x03 + #define DF_CMD_BUFF1READ_LF 0xD1 + #define DF_CMD_BUFF2READ_LF 0xD3 + + #define DF_CMD_BUFF1WRITE 0x84 + #define DF_CMD_BUFF2WRITE 0x87 + #define DF_CMD_BUFF1TOMAINMEMWITHERASE 0x83 + #define DF_CMD_BUFF2TOMAINMEMWITHERASE 0x86 + #define DF_CMD_BUFF1TOMAINMEM 0x88 + #define DF_CMD_BUFF2TOMAINMEM 0x89 + #define DF_CMD_MAINMEMPAGETHROUGHBUFF1 0x82 + #define DF_CMD_MAINMEMPAGETHROUGHBUFF2 0x85 + + #define DF_CMD_PAGEERASE 0x81 + #define DF_CMD_BLOCKERASE 0x50 + #define DF_CMD_SECTORERASE 0x7C + + #define DF_CMD_CHIPERASE ((char[]){0xC7, 0x94, 0x80, 0x9A}) + #define DF_CMD_CHIPERASE_BYTE1 0xC7 + #define DF_CMD_CHIPERASE_BYTE2 0x94 + #define DF_CMD_CHIPERASE_BYTE3 0x80 + #define DF_CMD_CHIPERASE_BYTE4 0x9A + + #define DF_CMD_SECTORPROTECTIONOFF ((char[]){0x3D, 0x2A, 0x7F, 0x9A}) + #define DF_CMD_SECTORPROTECTIONOFF_BYTE1 0x3D + #define DF_CMD_SECTORPROTECTIONOFF_BYTE2 0x2A + #define DF_CMD_SECTORPROTECTIONOFF_BYTE3 0x7F + #define DF_CMD_SECTORPROTECTIONOFF_BYTE4 0x9A + + #define DF_CMD_BINARYPAGESIZEMODEON ((char[]){0x3D, 0x2A, 0x80, 0xA6}) + #define DF_CMD_BINARYPAGESIZEMODEON_BYTE1 0x3D + #define DF_CMD_BINARYPAGESIZEMODEON_BYTE2 0x2A + #define DF_CMD_BINARYPAGESIZEMODEON_BYTE3 0x80 + #define DF_CMD_BINARYPAGESIZEMODEON_BYTE4 0xA6 + + #define DF_CMD_READMANUFACTURERDEVICEINFO 0x9F + //@} + + /** Manufacturer code for Atmel Corporation, returned by Atmel Dataflash ICs in response to the \c DF_CMD_READMANUFACTURERDEVICEINFO command. */ + #define DF_MANUFACTURER_ATMEL 0x1F + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/Misc/RingBuffer.h b/lib/lufa/LUFA/Drivers/Misc/RingBuffer.h new file mode 100644 index 000000000..0e76a0779 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/Misc/RingBuffer.h @@ -0,0 +1,308 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Lightweight ring (circular) buffer, for fast insertion/deletion of bytes. + * + * Lightweight ring buffer, for fast insertion/deletion. Multiple buffers can be created of + * different sizes to suit different needs. + * + * Note that for each buffer, insertion and removal operations may occur at the same time (via + * a multi-threaded ISR based system) however the same kind of operation (two or more insertions + * or deletions) must not overlap. If there is possibility of two or more of the same kind of + * operating occurring at the same point in time, atomic (mutex) locking should be used. + */ + +/** \ingroup Group_MiscDrivers + * \defgroup Group_RingBuff Generic Byte Ring Buffer - LUFA/Drivers/Misc/RingBuffer.h + * \brief Lightweight ring buffer, for fast insertion/deletion of bytes. + * + * \section Sec_RingBuff_Dependencies Module Source Dependencies + * The following files must be built with any user project that uses this module: + * - None + * + * \section Sec_RingBuff_ModDescription Module Description + * Lightweight ring buffer, for fast insertion/deletion. Multiple buffers can be created of + * different sizes to suit different needs. + * + * Note that for each buffer, insertion and removal operations may occur at the same time (via + * a multi-threaded ISR based system) however the same kind of operation (two or more insertions + * or deletions) must not overlap. If there is possibility of two or more of the same kind of + * operating occurring at the same point in time, atomic (mutex) locking should be used. + * + * \section Sec_RingBuff_ExampleUsage Example Usage + * The following snippet is an example of how this module may be used within a typical + * application. + * + * \code + * // Create the buffer structure and its underlying storage array + * RingBuffer_t Buffer; + * uint8_t BufferData[128]; + * + * // Initialize the buffer with the created storage array + * RingBuffer_InitBuffer(&Buffer, BufferData, sizeof(BufferData)); + * + * // Insert some data into the buffer + * RingBuffer_Insert(&Buffer, 'H'); + * RingBuffer_Insert(&Buffer, 'E'); + * RingBuffer_Insert(&Buffer, 'L'); + * RingBuffer_Insert(&Buffer, 'L'); + * RingBuffer_Insert(&Buffer, 'O'); + * + * // Cache the number of stored bytes in the buffer + * uint16_t BufferCount = RingBuffer_GetCount(&Buffer); + * + * // Printer stored data length + * printf("Buffer Length: %d, Buffer Data: \r\n", BufferCount); + * + * // Print contents of the buffer one character at a time + * while (BufferCount--) + * putc(RingBuffer_Remove(&Buffer)); + * \endcode + * + * @{ + */ + +#ifndef __RING_BUFFER_H__ +#define __RING_BUFFER_H__ + + /* Includes: */ + #include "../../Common/Common.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Type Defines: */ + /** \brief Ring Buffer Management Structure. + * + * Type define for a new ring buffer object. Buffers should be initialized via a call to + * \ref RingBuffer_InitBuffer() before use. + */ + typedef struct + { + uint8_t* In; /**< Current storage location in the circular buffer. */ + uint8_t* Out; /**< Current retrieval location in the circular buffer. */ + uint8_t* Start; /**< Pointer to the start of the buffer's underlying storage array. */ + uint8_t* End; /**< Pointer to the end of the buffer's underlying storage array. */ + uint16_t Size; /**< Size of the buffer's underlying storage array. */ + uint16_t Count; /**< Number of bytes currently stored in the buffer. */ + } RingBuffer_t; + + /* Inline Functions: */ + /** Initializes a ring buffer ready for use. Buffers must be initialized via this function + * before any operations are called upon them. Already initialized buffers may be reset + * by re-initializing them using this function. + * + * \param[out] Buffer Pointer to a ring buffer structure to initialize. + * \param[out] DataPtr Pointer to a global array that will hold the data stored into the ring buffer. + * \param[out] Size Maximum number of bytes that can be stored in the underlying data array. + */ + static inline void RingBuffer_InitBuffer(RingBuffer_t* Buffer, + uint8_t* const DataPtr, + const uint16_t Size) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + static inline void RingBuffer_InitBuffer(RingBuffer_t* Buffer, + uint8_t* const DataPtr, + const uint16_t Size) + { + GCC_FORCE_POINTER_ACCESS(Buffer); + + uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask(); + GlobalInterruptDisable(); + + Buffer->In = DataPtr; + Buffer->Out = DataPtr; + Buffer->Start = &DataPtr[0]; + Buffer->End = &DataPtr[Size]; + Buffer->Size = Size; + Buffer->Count = 0; + + SetGlobalInterruptMask(CurrentGlobalInt); + } + + /** Retrieves the current number of bytes stored in a particular buffer. This value is computed + * by entering an atomic lock on the buffer, so that the buffer cannot be modified while the + * computation takes place. This value should be cached when reading out the contents of the buffer, + * so that as small a time as possible is spent in an atomic lock. + * + * \note The value returned by this function is guaranteed to only be the minimum number of bytes + * stored in the given buffer; this value may change as other threads write new data, thus + * the returned number should be used only to determine how many successive reads may safely + * be performed on the buffer. + * + * \param[in] Buffer Pointer to a ring buffer structure whose count is to be computed. + * + * \return Number of bytes currently stored in the buffer. + */ + static inline uint16_t RingBuffer_GetCount(RingBuffer_t* const Buffer) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1); + static inline uint16_t RingBuffer_GetCount(RingBuffer_t* const Buffer) + { + uint16_t Count; + + uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask(); + GlobalInterruptDisable(); + + Count = Buffer->Count; + + SetGlobalInterruptMask(CurrentGlobalInt); + return Count; + } + + /** Retrieves the free space in a particular buffer. This value is computed by entering an atomic lock + * on the buffer, so that the buffer cannot be modified while the computation takes place. + * + * \note The value returned by this function is guaranteed to only be the maximum number of bytes + * free in the given buffer; this value may change as other threads write new data, thus + * the returned number should be used only to determine how many successive writes may safely + * be performed on the buffer when there is a single writer thread. + * + * \param[in] Buffer Pointer to a ring buffer structure whose free count is to be computed. + * + * \return Number of free bytes in the buffer. + */ + static inline uint16_t RingBuffer_GetFreeCount(RingBuffer_t* const Buffer) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1); + static inline uint16_t RingBuffer_GetFreeCount(RingBuffer_t* const Buffer) + { + return (Buffer->Size - RingBuffer_GetCount(Buffer)); + } + + /** Atomically determines if the specified ring buffer contains any data. This should + * be tested before removing data from the buffer, to ensure that the buffer does not + * underflow. + * + * If the data is to be removed in a loop, store the total number of bytes stored in the + * buffer (via a call to the \ref RingBuffer_GetCount() function) in a temporary variable + * to reduce the time spent in atomicity locks. + * + * \param[in,out] Buffer Pointer to a ring buffer structure to insert into. + * + * \return Boolean \c true if the buffer contains no free space, \c false otherwise. + */ + static inline bool RingBuffer_IsEmpty(RingBuffer_t* const Buffer) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1); + static inline bool RingBuffer_IsEmpty(RingBuffer_t* const Buffer) + { + return (RingBuffer_GetCount(Buffer) == 0); + } + + /** Atomically determines if the specified ring buffer contains any free space. This should + * be tested before storing data to the buffer, to ensure that no data is lost due to a + * buffer overrun. + * + * \param[in,out] Buffer Pointer to a ring buffer structure to insert into. + * + * \return Boolean \c true if the buffer contains no free space, \c false otherwise. + */ + static inline bool RingBuffer_IsFull(RingBuffer_t* const Buffer) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1); + static inline bool RingBuffer_IsFull(RingBuffer_t* const Buffer) + { + return (RingBuffer_GetCount(Buffer) == Buffer->Size); + } + + /** Inserts an element into the ring buffer. + * + * \warning Only one execution thread (main program thread or an ISR) may insert into a single buffer + * otherwise data corruption may occur. Insertion and removal may occur from different execution + * threads. + * + * \param[in,out] Buffer Pointer to a ring buffer structure to insert into. + * \param[in] Data Data element to insert into the buffer. + */ + static inline void RingBuffer_Insert(RingBuffer_t* Buffer, + const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1); + static inline void RingBuffer_Insert(RingBuffer_t* Buffer, + const uint8_t Data) + { + GCC_FORCE_POINTER_ACCESS(Buffer); + + *Buffer->In = Data; + + if (++Buffer->In == Buffer->End) + Buffer->In = Buffer->Start; + + uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask(); + GlobalInterruptDisable(); + + Buffer->Count++; + + SetGlobalInterruptMask(CurrentGlobalInt); + } + + /** Removes an element from the ring buffer. + * + * \warning Only one execution thread (main program thread or an ISR) may remove from a single buffer + * otherwise data corruption may occur. Insertion and removal may occur from different execution + * threads. + * + * \param[in,out] Buffer Pointer to a ring buffer structure to retrieve from. + * + * \return Next data element stored in the buffer. + */ + static inline uint8_t RingBuffer_Remove(RingBuffer_t* Buffer) ATTR_NON_NULL_PTR_ARG(1); + static inline uint8_t RingBuffer_Remove(RingBuffer_t* Buffer) + { + GCC_FORCE_POINTER_ACCESS(Buffer); + + uint8_t Data = *Buffer->Out; + + if (++Buffer->Out == Buffer->End) + Buffer->Out = Buffer->Start; + + uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask(); + GlobalInterruptDisable(); + + Buffer->Count--; + + SetGlobalInterruptMask(CurrentGlobalInt); + + return Data; + } + + /** Returns the next element stored in the ring buffer, without removing it. + * + * \param[in,out] Buffer Pointer to a ring buffer structure to retrieve from. + * + * \return Next data element stored in the buffer. + */ + static inline uint8_t RingBuffer_Peek(RingBuffer_t* const Buffer) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1); + static inline uint8_t RingBuffer_Peek(RingBuffer_t* const Buffer) + { + return *Buffer->Out; + } + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/Misc/TerminalCodes.h b/lib/lufa/LUFA/Drivers/Misc/TerminalCodes.h new file mode 100644 index 000000000..b12a247ed --- /dev/null +++ b/lib/lufa/LUFA/Drivers/Misc/TerminalCodes.h @@ -0,0 +1,231 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief ANSI terminal special escape code macros. + * + * ANSI terminal compatible escape sequences. These escape sequences are designed to be concatenated with existing + * strings to modify their display on a compatible terminal application. + */ + +/** \ingroup Group_MiscDrivers + * \defgroup Group_Terminal ANSI Terminal Escape Codes - LUFA/Drivers/Misc/TerminalCodes.h + * \brief ANSI terminal special escape code macros. + * + * \section Sec_Terminal_Dependencies Module Source Dependencies + * The following files must be built with any user project that uses this module: + * - None + * + * \section Sec_Terminal_ModDescription Module Description + * Escape code macros for ANSI compliant text terminals. + * + * \note If desired, the macro \c DISABLE_TERMINAL_CODES can be defined in the project makefile and passed to the GCC + * compiler via the -D switch to disable the terminal codes without modifying the source, for use with non + * compatible terminals (any terminal codes then equate to empty strings). + * + * \section Sec_Terminal_ExampleUsage Example Usage + * The following snippet is an example of how this module may be used within a typical + * application. + * + * \code + * printf("Normal String, " + * ESC_BOLD_ON "Bold String, " + * ESC_UNDERLINE_ON "Bold and Underlined String" + * ESC_RESET ESC_FG_BLUE ESC_BG_YELLOW "Normal Blue-on-Yellow String"); + * \endcode + * + * @{ + */ + +#ifndef __TERMINALCODES_H__ +#define __TERMINALCODES_H__ + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + #if !defined(DISABLE_TERMINAL_CODES) + /** Creates an ANSI escape sequence with the specified payload. + * + * \param[in] EscapeSeq Payload to encode as an ANSI escape sequence, a \c ESC_* mask. + */ + #define ANSI_ESCAPE_SEQUENCE(EscapeSeq) "\33[" EscapeSeq + #else + #define ANSI_ESCAPE_SEQUENCE(EscapeSeq) + #endif + + /** \name Text Display Modifier Control Sequences */ + //@{ + /** Turns on bold so that any following text is printed to the terminal in bold. */ + #define ESC_BOLD_ON ANSI_ESCAPE_SEQUENCE("1m") + + /** Turns on italics so that any following text is printed to the terminal in italics. */ + #define ESC_ITALICS_ON ANSI_ESCAPE_SEQUENCE("3m") + + /** Turns on underline so that any following text is printed to the terminal underlined. */ + #define ESC_UNDERLINE_ON ANSI_ESCAPE_SEQUENCE("4m") + + /** Turns on inverse so that any following text is printed to the terminal in inverted colours. */ + #define ESC_INVERSE_ON ANSI_ESCAPE_SEQUENCE("7m") + + /** Turns on strike-through so that any following text is printed to the terminal with a line through the + * center. + */ + #define ESC_STRIKETHROUGH_ON ANSI_ESCAPE_SEQUENCE("9m") + + /** Turns off bold so that any following text is printed to the terminal in non bold. */ + #define ESC_BOLD_OFF ANSI_ESCAPE_SEQUENCE("22m") + + /** Turns off italics so that any following text is printed to the terminal in non italics. */ + #define ESC_ITALICS_OFF ANSI_ESCAPE_SEQUENCE("23m") + + /** Turns off underline so that any following text is printed to the terminal non underlined. */ + #define ESC_UNDERLINE_OFF ANSI_ESCAPE_SEQUENCE("24m") + + /** Turns off inverse so that any following text is printed to the terminal in non inverted colours. */ + #define ESC_INVERSE_OFF ANSI_ESCAPE_SEQUENCE("27m") + + /** Turns off strike-through so that any following text is printed to the terminal without a line through + * the center. + */ + #define ESC_STRIKETHROUGH_OFF ANSI_ESCAPE_SEQUENCE("29m") + //@} + + /** \name Text Colour Control Sequences */ + //@{ + /** Sets the foreground (text) colour to black. */ + #define ESC_FG_BLACK ANSI_ESCAPE_SEQUENCE("30m") + + /** Sets the foreground (text) colour to red. */ + #define ESC_FG_RED ANSI_ESCAPE_SEQUENCE("31m") + + /** Sets the foreground (text) colour to green. */ + #define ESC_FG_GREEN ANSI_ESCAPE_SEQUENCE("32m") + + /** Sets the foreground (text) colour to yellow. */ + #define ESC_FG_YELLOW ANSI_ESCAPE_SEQUENCE("33m") + + /** Sets the foreground (text) colour to blue. */ + #define ESC_FG_BLUE ANSI_ESCAPE_SEQUENCE("34m") + + /** Sets the foreground (text) colour to magenta. */ + #define ESC_FG_MAGENTA ANSI_ESCAPE_SEQUENCE("35m") + + /** Sets the foreground (text) colour to cyan. */ + #define ESC_FG_CYAN ANSI_ESCAPE_SEQUENCE("36m") + + /** Sets the foreground (text) colour to white. */ + #define ESC_FG_WHITE ANSI_ESCAPE_SEQUENCE("37m") + + /** Sets the foreground (text) colour to the terminal's default. */ + #define ESC_FG_DEFAULT ANSI_ESCAPE_SEQUENCE("39m") + + /** Sets the text background colour to black. */ + #define ESC_BG_BLACK ANSI_ESCAPE_SEQUENCE("40m") + + /** Sets the text background colour to red. */ + #define ESC_BG_RED ANSI_ESCAPE_SEQUENCE("41m") + + /** Sets the text background colour to green. */ + #define ESC_BG_GREEN ANSI_ESCAPE_SEQUENCE("42m") + + /** Sets the text background colour to yellow. */ + #define ESC_BG_YELLOW ANSI_ESCAPE_SEQUENCE("43m") + + /** Sets the text background colour to blue. */ + #define ESC_BG_BLUE ANSI_ESCAPE_SEQUENCE("44m") + + /** Sets the text background colour to magenta. */ + #define ESC_BG_MAGENTA ANSI_ESCAPE_SEQUENCE("45m") + + /** Sets the text background colour to cyan. */ + #define ESC_BG_CYAN ANSI_ESCAPE_SEQUENCE("46m") + + /** Sets the text background colour to white. */ + #define ESC_BG_WHITE ANSI_ESCAPE_SEQUENCE("47m") + + /** Sets the text background colour to the terminal's default. */ + #define ESC_BG_DEFAULT ANSI_ESCAPE_SEQUENCE("49m") + //@} + + /** \name Cursor Positioning Control Sequences */ + //@{ + /** Saves the current cursor position so that it may be restored with \ref ESC_CURSOR_POS_RESTORE. */ + #define ESC_CURSOR_POS_SAVE ANSI_ESCAPE_SEQUENCE("s") + + /** Restores the cursor position to the last position saved with \ref ESC_CURSOR_POS_SAVE. */ + #define ESC_CURSOR_POS_RESTORE ANSI_ESCAPE_SEQUENCE("u") + + /** Sets the cursor position to the given line and column. + * + * \param[in] Line Line number to position the cursor at. + * \param[in] Column Column number to position the cursor at. + */ + #define ESC_CURSOR_POS(Line, Column) ANSI_ESCAPE_SEQUENCE(#Line ";" #Column "H") + + /** Moves the cursor up the given number of lines. + * + * \param[in] Lines Number of lines to move the cursor position + */ + #define ESC_CURSOR_UP(Lines) ANSI_ESCAPE_SEQUENCE(#Lines "A") + + /** Moves the cursor down the given number of lines. + * + * \param[in] Lines Number of lines to move the cursor position + */ + #define ESC_CURSOR_DOWN(Lines) ANSI_ESCAPE_SEQUENCE(#Lines "B") + + /** Moves the cursor to the right the given number of columns. + * + * \param[in] Columns Number of columns to move the cursor position + */ + #define ESC_CURSOR_FORWARD(Columns) ANSI_ESCAPE_SEQUENCE(#Columns "C") + + /** Moves the cursor to the left the given number of columns. + * + * \param[in] Columns Number of columns to move the cursor position + */ + #define ESC_CURSOR_BACKWARD(Columns) ANSI_ESCAPE_SEQUENCE(#Columns "D") + //@} + + /** \name Miscellaneous Control Sequences */ + //@{ + /** Resets any escape sequence modifiers back to their defaults. */ + #define ESC_RESET ANSI_ESCAPE_SEQUENCE("0m") + + /** Erases the entire display, returning the cursor to the top left. */ + #define ESC_ERASE_DISPLAY ANSI_ESCAPE_SEQUENCE("2J") + + /** Erases the current line, returning the cursor to the far left. */ + #define ESC_ERASE_LINE ANSI_ESCAPE_SEQUENCE("K") + //@} + +#endif + +/** @} */ + |