370 files changed, 116676 insertions, 0 deletions

diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioInput/AudioInput.c b/lib/lufa/Demos/Device/ClassDriver/AudioInput/AudioInput.c
new file mode 100644
index 000000000..2870bcd6f
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioInput/AudioInput.c
@@ -0,0 +1,274 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the AudioInput demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "AudioInput.h"
+
+/** LUFA Audio Class driver interface configuration and state information. This structure is
+ *  passed to all Audio Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_Audio_Device_t Microphone_Audio_Interface =
+	{
+		.Config =
+			{
+				.ControlInterfaceNumber   = INTERFACE_ID_AudioControl,
+				.StreamingInterfaceNumber = INTERFACE_ID_AudioStream,
+				.DataINEndpoint           =
+					{
+						.Address          = AUDIO_STREAM_EPADDR,
+						.Size             = AUDIO_STREAM_EPSIZE,
+						.Banks            = 2,
+					},
+			},
+	};
+
+/** Current audio sampling frequency of the streaming audio endpoint. */
+static uint32_t CurrentAudioSampleFrequency = 48000;
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		Audio_Device_USBTask(&Microphone_Audio_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	Buttons_Init();
+	ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
+	ADC_SetupChannel(MIC_IN_ADC_CHANNEL);
+	USB_Init();
+
+	/* Start the ADC conversion in free running mode */
+	ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
+}
+
+/** ISR to handle the reloading of the data endpoint with the next sample. */
+ISR(TIMER0_COMPA_vect, ISR_BLOCK)
+{
+	uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
+
+	/* Check that the USB bus is ready for the next sample to write */
+	if (Audio_Device_IsReadyForNextSample(&Microphone_Audio_Interface))
+	{
+		int16_t AudioSample;
+
+		#if defined(USE_TEST_TONE)
+			static uint8_t SquareWaveSampleCount;
+			static int16_t CurrentWaveValue;
+
+			/* In test tone mode, generate a square wave at 1/256 of the sample rate */
+			if (SquareWaveSampleCount++ == 0xFF)
+			  CurrentWaveValue ^= 0x8000;
+
+			/* Only generate audio if the board button is being pressed */
+			AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;
+		#else
+			/* Audio sample is ADC value scaled to fit the entire range */
+			AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());
+
+			#if defined(MICROPHONE_BIASED_TO_HALF_RAIL)
+			/* Microphone is biased to half rail voltage, subtract the bias from the sample value */
+			AudioSample -= (SAMPLE_MAX_RANGE / 2);
+			#endif
+		#endif
+
+		Audio_Device_WriteSample16(&Microphone_Audio_Interface, AudioSample);
+	}
+
+	Endpoint_SelectEndpoint(PrevEndpoint);
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+	/* Sample reload timer initialization */
+	TIMSK0  = (1 << OCIE0A);
+	OCR0A   = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
+	TCCR0A  = (1 << WGM01);  // CTC mode
+	TCCR0B  = (1 << CS01);   // Fcpu/8 speed
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Stop the sample reload timer */
+	TCCR0B = 0;
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= Audio_Device_ConfigureEndpoints(&Microphone_Audio_Interface);
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	Audio_Device_ProcessControlRequest(&Microphone_Audio_Interface);
+}
+
+/** Audio class driver callback for the setting and retrieval of streaming endpoint properties. This callback must be implemented
+ *  in the user application to handle property manipulations on streaming audio endpoints.
+ *
+ *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
+ *  the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
+ *  to indicate the size of the retrieved data.
+ *
+ *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
+ *        of the \c DataLength parameter.
+ *
+ *  \param[in,out] AudioInterfaceInfo  Pointer to a structure containing an Audio Class configuration and state.
+ *  \param[in]     EndpointProperty    Property of the endpoint to get or set, a value from Audio_ClassRequests_t.
+ *  \param[in]     EndpointAddress     Address of the streaming endpoint whose property is being referenced.
+ *  \param[in]     EndpointControl     Parameter of the endpoint to get or set, a value from Audio_EndpointControls_t.
+ *  \param[in,out] DataLength          For SET operations, the length of the parameter data to set. For GET operations, the maximum
+ *                                     length of the retrieved data. When NULL, the function should return whether the given property
+ *                                     and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
+ *  \param[in,out] Data                Pointer to a location where the parameter data is stored for SET operations, or where
+ *                                     the retrieved data is to be stored for GET operations.
+ *
+ *  \return Boolean \c true if the property get/set was successful, \c false otherwise
+ */
+bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
+                                                  const uint8_t EndpointProperty,
+                                                  const uint8_t EndpointAddress,
+                                                  const uint8_t EndpointControl,
+                                                  uint16_t* const DataLength,
+                                                  uint8_t* Data)
+{
+	/* Check the requested endpoint to see if a supported endpoint is being manipulated */
+	if (EndpointAddress == Microphone_Audio_Interface.Config.DataINEndpoint.Address)
+	{
+		/* Check the requested control to see if a supported control is being manipulated */
+		if (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)
+		{
+			switch (EndpointProperty)
+			{
+				case AUDIO_REQ_SetCurrent:
+					/* Check if we are just testing for a valid property, or actually adjusting it */
+					if (DataLength != NULL)
+					{
+						/* Set the new sampling frequency to the value given by the host */
+						CurrentAudioSampleFrequency = (((uint32_t)Data[2] << 16) | ((uint32_t)Data[1] << 8) | (uint32_t)Data[0]);
+
+						/* Adjust sample reload timer to the new frequency */
+						OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
+					}
+
+					return true;
+				case AUDIO_REQ_GetCurrent:
+					/* Check if we are just testing for a valid property, or actually reading it */
+					if (DataLength != NULL)
+					{
+						*DataLength = 3;
+
+						Data[2] = (CurrentAudioSampleFrequency >> 16);
+						Data[1] = (CurrentAudioSampleFrequency >> 8);
+						Data[0] = (CurrentAudioSampleFrequency &  0xFF);
+					}
+
+					return true;
+			}
+		}
+	}
+
+	return false;
+}
+
+/** Audio class driver callback for the setting and retrieval of streaming interface properties. This callback must be implemented
+ *  in the user application to handle property manipulations on streaming audio interfaces.
+ *
+ *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
+ *  the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations
+ *  to indicate the size of the retrieved data.
+ *
+ *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
+ *        of the \c DataLength parameter.
+ *
+ *  \param[in,out] AudioInterfaceInfo  Pointer to a structure containing an Audio Class configuration and state.
+ *  \param[in]     Property            Property of the interface to get or set, a value from Audio_ClassRequests_t.
+ *  \param[in]     EntityAddress       Address of the audio entity whose property is being referenced.
+ *  \param[in]     Parameter           Parameter of the entity to get or set, specific to each type of entity (see USB Audio specification).
+ *  \param[in,out] DataLength          For SET operations, the length of the parameter data to set. For GET operations, the maximum
+ *                                     length of the retrieved data. When NULL, the function should return whether the given property
+ *                                     and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
+ *  \param[in,out] Data                Pointer to a location where the parameter data is stored for SET operations, or where
+ *                                     the retrieved data is to be stored for GET operations.
+ *
+ *  \return Boolean \c true if the property GET/SET was successful, \c false otherwise
+ */
+bool CALLBACK_Audio_Device_GetSetInterfaceProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
+                                                   const uint8_t Property,
+                                                   const uint8_t EntityAddress,
+                                                   const uint16_t Parameter,
+                                                   uint16_t* const DataLength,
+                                                   uint8_t* Data)
+{
+	/* No audio interface entities in the device descriptor, thus no properties to get or set. */
+	return false;
+}
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioInput/AudioInput.h b/lib/lufa/Demos/Device/ClassDriver/AudioInput/AudioInput.h
new file mode 100644
index 000000000..1deaa7688
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioInput/AudioInput.h
@@ -0,0 +1,94 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for AudioInput.c.
+ */
+
+#ifndef _AUDIO_INPUT_H_
+#define _AUDIO_INPUT_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Drivers/Peripheral/ADC.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+		#include "Descriptors.h"
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Maximum audio sample value for the microphone input. */
+		#define SAMPLE_MAX_RANGE          0xFFFF
+
+		/** Maximum ADC range for the microphone input. */
+		#define ADC_MAX_RANGE             0x3FF
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+		bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
+		                                                  const uint8_t EndpointProperty,
+		                                                  const uint8_t EndpointAddress,
+		                                                  const uint8_t EndpointControl,
+		                                                  uint16_t* const DataLength,
+		                                                  uint8_t* Data) ATTR_NON_NULL_PTR_ARG(1);
+		bool CALLBACK_Audio_Device_GetSetInterfaceProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
+		                                                   const uint8_t Property,
+		                                                   const uint8_t EntityAddress,
+		                                                   const uint16_t Parameter,
+		                                                   uint16_t* const DataLength,
+		                                                   uint8_t* Data);
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioInput/AudioInput.txt b/lib/lufa/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
new file mode 100644
index 000000000..4b0594244
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
@@ -0,0 +1,92 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Audio Input Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Audio Class</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Standard Audio Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Audio 1.0 Class Specification \n
+ *        USBIF Audio 1.0 Class Terminal Types Specification \n
+ *        USBIF Audio 1.0 Data Formats Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Audio demonstration application. This gives a simple reference
+ *  application for implementing a USB Audio Input device using the
+ *  basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers
+ *  required).
+ *
+ *  On start-up the system will automatically enumerate and function as a
+ *  USB microphone. By default, the demo will produce a square wave test tone
+ *  when the board button is pressed. If USE_TEST_TONE is not defined in the
+ *  project makefile, incoming audio from the ADC channel 1 will be sampled
+ *  and sent to the host computer instead.
+ *
+ *  When in microphone mode, connect a microphone to the ADC channel 2.
+ *
+ *  Under Windows, if a driver request dialogue pops up, select the option
+ *  to automatically install the appropriate drivers.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>MIC_IN_ADC_CHANNEL</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>USE_TEST_TONE</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
+ *        instead of sampling the board microphone.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h b/lib/lufa/Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h
new file mode 100644
index 000000000..ff8ed270d
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h
@@ -0,0 +1,51 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define MIC_IN_ADC_CHANNEL               2
+
+	#define MICROPHONE_BIASED_TO_HALF_RAIL
+	#define USE_TEST_TONE
+
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioInput/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/AudioInput/Config/LUFAConfig.h
new file mode 100644
index 000000000..6048c1d80
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioInput/Config/LUFAConfig.h
@@ -0,0 +1,93 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioInput/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/AudioInput/Descriptors.c
new file mode 100644
index 000000000..82cb337da
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioInput/Descriptors.c
@@ -0,0 +1,312 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(2,0,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2047,
+	.ReleaseNumber          = VERSION_BCD(0,0,2),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces          = 2,
+
+			.ConfigurationNumber      = 1,
+			.ConfigurationStrIndex    = NO_DESCRIPTOR,
+
+			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
+		},
+
+	.Audio_ControlInterface =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioControl,
+			.AlternateSetting         = 0,
+
+			.TotalEndpoints           = 0,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_ControlSubclass,
+			.Protocol                 = AUDIO_CSCP_ControlProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_ControlInterface_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
+
+			.ACSpecification          = VERSION_BCD(1,0,0),
+			.TotalLength              = (sizeof(USB_Audio_Descriptor_Interface_AC_t) +
+			                             sizeof(USB_Audio_Descriptor_InputTerminal_t) +
+			                             sizeof(USB_Audio_Descriptor_OutputTerminal_t)),
+
+			.InCollection             = 1,
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+		},
+
+	.Audio_InputTerminal =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
+
+			.TerminalID               = 0x01,
+			.TerminalType             = AUDIO_TERMINAL_IN_MIC,
+			.AssociatedOutputTerminal = 0x00,
+
+			.TotalChannels            = 1,
+			.ChannelConfig            = 0,
+
+			.ChannelStrIndex          = NO_DESCRIPTOR,
+			.TerminalStrIndex         = NO_DESCRIPTOR
+		},
+
+	.Audio_OutputTerminal =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
+
+			.TerminalID               = 0x02,
+			.TerminalType             = AUDIO_TERMINAL_STREAMING,
+			.AssociatedInputTerminal  = 0x00,
+
+			.SourceID                 = 0x01,
+
+			.TerminalStrIndex         = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_Alt0 =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+			.AlternateSetting         = 0,
+
+			.TotalEndpoints           = 0,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
+			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_Alt1 =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+			.AlternateSetting         = 1,
+
+			.TotalEndpoints           = 1,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
+			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
+
+			.TerminalLink             = 0x02,
+
+			.FrameDelay               = 1,
+			.AudioFormat              = 0x0001
+		},
+
+	.Audio_AudioFormat =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Format_t) +
+			                                     sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates),
+			                             .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_FormatType,
+
+			.FormatType               = 0x01,
+			.Channels                 = 0x01,
+
+			.SubFrameSize             = 0x02,
+			.BitResolution            = 16,
+
+			.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t))
+		},
+
+	.Audio_AudioFormatSampleRates =
+		{
+			AUDIO_SAMPLE_FREQ(8000),
+			AUDIO_SAMPLE_FREQ(11025),
+			AUDIO_SAMPLE_FREQ(22050),
+			AUDIO_SAMPLE_FREQ(44100),
+			AUDIO_SAMPLE_FREQ(48000),
+		},
+
+	.Audio_StreamEndpoint =
+		{
+			.Endpoint =
+				{
+					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
+
+					.EndpointAddress     = AUDIO_STREAM_EPADDR,
+					.Attributes          = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
+					.EndpointSize        = AUDIO_STREAM_EPSIZE,
+					.PollingIntervalMS   = 0x01
+				},
+
+			.Refresh                  = 0,
+			.SyncEndpointNumber       = 0
+		},
+
+	.Audio_StreamEndpoint_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint},
+			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
+
+			.Attributes               = (AUDIO_EP_ACCEPTS_SMALL_PACKETS | AUDIO_EP_SAMPLE_FREQ_CONTROL),
+
+			.LockDelayUnits           = 0x00,
+			.LockDelay                = 0x0000
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Audio In Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioInput/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/AudioInput/Descriptors.h
new file mode 100644
index 000000000..bb73220a2
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioInput/Descriptors.h
@@ -0,0 +1,106 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Endpoint address of the Audio isochronous streaming data IN endpoint. */
+		#define AUDIO_STREAM_EPADDR           (ENDPOINT_DIR_IN | 1)
+
+		/** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */
+		#define AUDIO_STREAM_EPSIZE           256
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t     Config;
+
+			// Audio Control Interface
+			USB_Descriptor_Interface_t                Audio_ControlInterface;
+			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
+			USB_Audio_Descriptor_InputTerminal_t      Audio_InputTerminal;
+			USB_Audio_Descriptor_OutputTerminal_t     Audio_OutputTerminal;
+
+			// Audio Streaming Interface
+			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt0;
+			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt1;
+			USB_Audio_Descriptor_Interface_AS_t       Audio_StreamInterface_SPC;
+			USB_Audio_Descriptor_Format_t             Audio_AudioFormat;
+			USB_Audio_SampleFreq_t                    Audio_AudioFormatSampleRates[5];
+			USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint;
+			USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
+			INTERFACE_ID_AudioStream  = 1, /**< Audio stream interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioInput/asf.xml b/lib/lufa/Demos/Device/ClassDriver/AudioInput/asf.xml
new file mode 100644
index 000000000..466de7303
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioInput/asf.xml
@@ -0,0 +1,52 @@
+<asf xmlversion="1.0">

+	<project caption="Audio Input Device Demo (Class Driver APIs)" id="lufa.demos.device.class.audio_input.example.avr8">

+		<require idref="lufa.demos.device.class.audio_input"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.audio_input" caption="Audio Input Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Audio 1.0 Input device demo, implementing a basic USB microphone. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="Audio Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="AudioInput.txt"/>

+

+		<build type="c-source" value="AudioInput.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="AudioInput.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

+		<build type="header-file" value="Config/AppConfig.h"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.peripheral.adc"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.buttons"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioInput/doxyfile b/lib/lufa/Demos/Device/ClassDriver/AudioInput/doxyfile
new file mode 100644
index 000000000..d52d22cdc
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioInput/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Audio Input Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioInput/makefile b/lib/lufa/Demos/Device/ClassDriver/AudioInput/makefile
new file mode 100644
index 000000000..db4048243
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioInput/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = AudioInput
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
new file mode 100644
index 000000000..4c78deb9f
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
@@ -0,0 +1,311 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the AudioOutput demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "AudioOutput.h"
+
+/** LUFA Audio Class driver interface configuration and state information. This structure is
+ *  passed to all Audio Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_Audio_Device_t Speaker_Audio_Interface =
+	{
+		.Config =
+			{
+				.ControlInterfaceNumber   = INTERFACE_ID_AudioControl,
+				.StreamingInterfaceNumber = INTERFACE_ID_AudioStream,
+				.DataOUTEndpoint          =
+					{
+						.Address          = AUDIO_STREAM_EPADDR,
+						.Size             = AUDIO_STREAM_EPSIZE,
+						.Banks            = 2,
+					},
+			},
+	};
+
+/** Current audio sampling frequency of the streaming audio endpoint. */
+static uint32_t CurrentAudioSampleFrequency = 48000;
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		Audio_Device_USBTask(&Speaker_Audio_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	USB_Init();
+}
+
+/** ISR to handle the reloading of the PWM timer with the next sample. */
+ISR(TIMER0_COMPA_vect, ISR_BLOCK)
+{
+	uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
+
+	/* Check that the USB bus is ready for the next sample to read */
+	if (Audio_Device_IsSampleReceived(&Speaker_Audio_Interface))
+	{
+		/* Retrieve the signed 16-bit left and right audio samples, convert to 8-bit */
+		int8_t LeftSample_8Bit  = (Audio_Device_ReadSample16(&Speaker_Audio_Interface) >> 8);
+		int8_t RightSample_8Bit = (Audio_Device_ReadSample16(&Speaker_Audio_Interface) >> 8);
+
+		/* Mix the two channels together to produce a mono, 8-bit sample */
+		int8_t MixedSample_8Bit = (((int16_t)LeftSample_8Bit + (int16_t)RightSample_8Bit) >> 1);
+
+		#if defined(AUDIO_OUT_MONO)
+		/* Load the sample into the PWM timer channel */
+		OCR3A = (MixedSample_8Bit ^ (1 << 7));
+		#elif defined(AUDIO_OUT_STEREO)
+		/* Load the dual 8-bit samples into the PWM timer channels */
+		OCR3A = (LeftSample_8Bit  ^ (1 << 7));
+		OCR3B = (RightSample_8Bit ^ (1 << 7));
+		#elif defined(AUDIO_OUT_PORTC)
+		/* Load the 8-bit mixed sample into PORTC */
+		PORTC = MixedSample_8Bit;
+		#endif
+
+		uint8_t LEDMask = LEDS_NO_LEDS;
+
+		/* Turn on LEDs as the sample amplitude increases */
+		if (MixedSample_8Bit > 16)
+		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4);
+		else if (MixedSample_8Bit > 8)
+		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3);
+		else if (MixedSample_8Bit > 4)
+		  LEDMask = (LEDS_LED1 | LEDS_LED2);
+		else if (MixedSample_8Bit > 2)
+		  LEDMask = (LEDS_LED1);
+
+		LEDs_SetAllLEDs(LEDMask);
+	}
+
+	Endpoint_SelectEndpoint(PrevEndpoint);
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+	/* Sample reload timer initialization */
+	TIMSK0  = (1 << OCIE0A);
+	OCR0A   = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
+	TCCR0A  = (1 << WGM01);  // CTC mode
+	TCCR0B  = (1 << CS01);   // Fcpu/8 speed
+
+	#if defined(AUDIO_OUT_MONO)
+	/* Set speaker as output */
+	DDRC   |= (1 << 6);
+	#elif defined(AUDIO_OUT_STEREO)
+	/* Set speakers as outputs */
+	DDRC   |= ((1 << 6) | (1 << 5));
+	#elif defined(AUDIO_OUT_PORTC)
+	/* Set PORTC as outputs */
+	DDRC   |= 0xFF;
+	#endif
+
+	#if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO))
+	/* PWM speaker timer initialization */
+	TCCR3A  = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)
+	        | (1 << COM3B1) | (1 << COM3B0)); // Set on match, clear on TOP
+	TCCR3B  = ((1 << WGM32) | (1 << CS30));  // Fast 8-Bit PWM, F_CPU speed
+	#endif
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+
+	/* Stop the sample reload timer */
+	TCCR0B = 0;
+
+	#if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO))
+	/* Stop the PWM generation timer */
+	TCCR3B = 0;
+	#endif
+
+	#if defined(AUDIO_OUT_MONO)
+	/* Set speaker as input to reduce current draw */
+	DDRC  &= ~(1 << 6);
+	#elif defined(AUDIO_OUT_STEREO)
+	/* Set speakers as inputs to reduce current draw */
+	DDRC  &= ~((1 << 6) | (1 << 5));
+	#elif defined(AUDIO_OUT_PORTC)
+	/* Set PORTC low */
+	PORTC = 0x00;
+	#endif
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= Audio_Device_ConfigureEndpoints(&Speaker_Audio_Interface);
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	Audio_Device_ProcessControlRequest(&Speaker_Audio_Interface);
+}
+
+/** Audio class driver callback for the setting and retrieval of streaming endpoint properties. This callback must be implemented
+ *  in the user application to handle property manipulations on streaming audio endpoints.
+ *
+ *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
+ *  the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
+ *  to indicate the size of the retrieved data.
+ *
+ *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
+ *        of the \c DataLength parameter.
+ *
+ *  \param[in,out] AudioInterfaceInfo  Pointer to a structure containing an Audio Class configuration and state.
+ *  \param[in]     EndpointProperty    Property of the endpoint to get or set, a value from Audio_ClassRequests_t.
+ *  \param[in]     EndpointAddress     Address of the streaming endpoint whose property is being referenced.
+ *  \param[in]     EndpointControl     Parameter of the endpoint to get or set, a value from Audio_EndpointControls_t.
+ *  \param[in,out] DataLength          For SET operations, the length of the parameter data to set. For GET operations, the maximum
+ *                                     length of the retrieved data. When NULL, the function should return whether the given property
+ *                                     and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
+ *  \param[in,out] Data                Pointer to a location where the parameter data is stored for SET operations, or where
+ *                                     the retrieved data is to be stored for GET operations.
+ *
+ *  \return Boolean \c true if the property get/set was successful, \c false otherwise
+ */
+bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
+                                                  const uint8_t EndpointProperty,
+                                                  const uint8_t EndpointAddress,
+                                                  const uint8_t EndpointControl,
+                                                  uint16_t* const DataLength,
+                                                  uint8_t* Data)
+{
+	/* Check the requested endpoint to see if a supported endpoint is being manipulated */
+	if (EndpointAddress == Speaker_Audio_Interface.Config.DataOUTEndpoint.Address)
+	{
+		/* Check the requested control to see if a supported control is being manipulated */
+		if (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)
+		{
+			switch (EndpointProperty)
+			{
+				case AUDIO_REQ_SetCurrent:
+					/* Check if we are just testing for a valid property, or actually adjusting it */
+					if (DataLength != NULL)
+					{
+						/* Set the new sampling frequency to the value given by the host */
+						CurrentAudioSampleFrequency = (((uint32_t)Data[2] << 16) | ((uint32_t)Data[1] << 8) | (uint32_t)Data[0]);
+
+						/* Adjust sample reload timer to the new frequency */
+						OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
+					}
+
+					return true;
+				case AUDIO_REQ_GetCurrent:
+					/* Check if we are just testing for a valid property, or actually reading it */
+					if (DataLength != NULL)
+					{
+						*DataLength = 3;
+
+						Data[2] = (CurrentAudioSampleFrequency >> 16);
+						Data[1] = (CurrentAudioSampleFrequency >> 8);
+						Data[0] = (CurrentAudioSampleFrequency &  0xFF);
+					}
+
+					return true;
+			}
+		}
+	}
+
+	return false;
+}
+
+/** Audio class driver callback for the setting and retrieval of streaming interface properties. This callback must be implemented
+ *  in the user application to handle property manipulations on streaming audio interfaces.
+ *
+ *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
+ *  the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations
+ *  to indicate the size of the retrieved data.
+ *
+ *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
+ *        of the \c DataLength parameter.
+ *
+ *  \param[in,out] AudioInterfaceInfo  Pointer to a structure containing an Audio Class configuration and state.
+ *  \param[in]     Property            Property of the interface to get or set, a value from Audio_ClassRequests_t.
+ *  \param[in]     EntityAddress       Address of the audio entity whose property is being referenced.
+ *  \param[in]     Parameter           Parameter of the entity to get or set, specific to each type of entity (see USB Audio specification).
+ *  \param[in,out] DataLength          For SET operations, the length of the parameter data to set. For GET operations, the maximum
+ *                                     length of the retrieved data. When NULL, the function should return whether the given property
+ *                                     and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
+ *  \param[in,out] Data                Pointer to a location where the parameter data is stored for SET operations, or where
+ *                                     the retrieved data is to be stored for GET operations.
+ *
+ *  \return Boolean \c true if the property GET/SET was successful, \c false otherwise
+ */
+bool CALLBACK_Audio_Device_GetSetInterfaceProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
+                                                   const uint8_t Property,
+                                                   const uint8_t EntityAddress,
+                                                   const uint16_t Parameter,
+                                                   uint16_t* const DataLength,
+                                                   uint8_t* Data)
+{
+	/* No audio interface entities in the device descriptor, thus no properties to get or set. */
+	return false;
+}
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h
new file mode 100644
index 000000000..4dbec315e
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h
@@ -0,0 +1,87 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for AudioOutput.c.
+ */
+
+#ifndef _AUDIO_OUTPUT_H_
+#define _AUDIO_OUTPUT_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdlib.h>
+
+		#include "Descriptors.h"
+		#include "Config/AppConfig.h"
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+		bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
+		                                                  const uint8_t EndpointProperty,
+		                                                  const uint8_t EndpointAddress,
+		                                                  const uint8_t EndpointControl,
+		                                                  uint16_t* const DataLength,
+		                                                  uint8_t* Data) ATTR_NON_NULL_PTR_ARG(1);
+		bool CALLBACK_Audio_Device_GetSetInterfaceProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
+		                                                   const uint8_t Property,
+		                                                   const uint8_t EntityAddress,
+		                                                   const uint16_t Parameter,
+		                                                   uint16_t* const DataLength,
+		                                                   uint8_t* Data);
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt
new file mode 100644
index 000000000..8f0c7d656
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt
@@ -0,0 +1,92 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Audio Output Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Audio Class</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Standard Audio Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Audio 1.0 Class Specification \n
+ *        USBIF Audio 1.0 Class Terminal Types Specification \n
+ *        USBIF Audio 1.0 Data Formats Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Audio demonstration application. This gives a simple reference
+ *  application for implementing a USB Audio Output device using the
+ *  basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers
+ *  required).
+ *
+ *  On start-up the system will automatically enumerate and function
+ *  as a USB speaker. Outgoing audio will output in 8-bit PWM onto
+ *  the timer 3 output compare channel A for AUDIO_OUT_MONO mode, on
+ *  timer 3 channels A and B for AUDIO_OUT_STEREO and on PORTC as a signed
+ *  mono sample for AUDIO_OUT_PORTC. Audio output will also be indicated on
+ *  the board LEDs in all modes. Decouple audio outputs with a capacitor and
+ *  attach to a speaker to hear the audio.
+ *
+ *  Under Windows, if a driver request dialogue pops up, select the option
+ *  to automatically install the appropriate drivers.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>AUDIO_OUT_STEREO</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>AUDIO_OUT_MONO</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>AUDIO_OUT_PORTC</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an
+ *        external DAC.</td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioOutput/Config/AppConfig.h b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/Config/AppConfig.h
new file mode 100644
index 000000000..e93cfc813
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/Config/AppConfig.h
@@ -0,0 +1,50 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define AUDIO_OUT_STEREO
+//	#define AUDIO_OUT_MONO
+//	#define AUDIO_OUT_PORTC
+
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioOutput/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/Config/LUFAConfig.h
new file mode 100644
index 000000000..6048c1d80
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/Config/LUFAConfig.h
@@ -0,0 +1,93 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioOutput/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/Descriptors.c
new file mode 100644
index 000000000..42bd528bc
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/Descriptors.c
@@ -0,0 +1,312 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(2,0,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2046,
+	.ReleaseNumber          = VERSION_BCD(0,0,2),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces          = 2,
+
+			.ConfigurationNumber      = 1,
+			.ConfigurationStrIndex    = NO_DESCRIPTOR,
+
+			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
+		},
+
+	.Audio_ControlInterface =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioControl,
+			.AlternateSetting         = 0,
+
+			.TotalEndpoints           = 0,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_ControlSubclass,
+			.Protocol                 = AUDIO_CSCP_ControlProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_ControlInterface_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
+
+			.ACSpecification          = VERSION_BCD(1,0,0),
+			.TotalLength              = (sizeof(USB_Audio_Descriptor_Interface_AC_t) +
+			                             sizeof(USB_Audio_Descriptor_InputTerminal_t) +
+			                             sizeof(USB_Audio_Descriptor_OutputTerminal_t)),
+
+			.InCollection             = 1,
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+		},
+
+	.Audio_InputTerminal =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
+
+			.TerminalID               = 0x01,
+			.TerminalType             = AUDIO_TERMINAL_STREAMING,
+			.AssociatedOutputTerminal = 0x00,
+
+			.TotalChannels            = 2,
+			.ChannelConfig            = (AUDIO_CHANNEL_LEFT_FRONT | AUDIO_CHANNEL_RIGHT_FRONT),
+
+			.ChannelStrIndex          = NO_DESCRIPTOR,
+			.TerminalStrIndex         = NO_DESCRIPTOR
+		},
+
+	.Audio_OutputTerminal =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
+
+			.TerminalID               = 0x02,
+			.TerminalType             = AUDIO_TERMINAL_OUT_SPEAKER,
+			.AssociatedInputTerminal  = 0x00,
+
+			.SourceID                 = 0x01,
+
+			.TerminalStrIndex         = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_Alt0 =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+			.AlternateSetting         = 0,
+
+			.TotalEndpoints           = 0,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
+			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_Alt1 =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+			.AlternateSetting         = 1,
+
+			.TotalEndpoints           = 1,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
+			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
+
+			.TerminalLink             = 0x01,
+
+			.FrameDelay               = 1,
+			.AudioFormat              = 0x0001
+		},
+
+	.Audio_AudioFormat =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Format_t) +
+			                                     sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates),
+			                             .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_FormatType,
+
+			.FormatType               = 0x01,
+			.Channels                 = 0x02,
+
+			.SubFrameSize             = 0x02,
+			.BitResolution            = 16,
+
+			.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t)),
+		},
+
+	.Audio_AudioFormatSampleRates =
+		{
+			AUDIO_SAMPLE_FREQ(8000),
+			AUDIO_SAMPLE_FREQ(11025),
+			AUDIO_SAMPLE_FREQ(22050),
+			AUDIO_SAMPLE_FREQ(44100),
+			AUDIO_SAMPLE_FREQ(48000),
+		},
+
+	.Audio_StreamEndpoint =
+		{
+			.Endpoint =
+				{
+					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
+
+					.EndpointAddress     = AUDIO_STREAM_EPADDR,
+					.Attributes          = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
+					.EndpointSize        = AUDIO_STREAM_EPSIZE,
+					.PollingIntervalMS   = 0x01
+				},
+
+			.Refresh                  = 0,
+			.SyncEndpointNumber       = 0
+		},
+
+	.Audio_StreamEndpoint_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint},
+			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
+
+			.Attributes               = (AUDIO_EP_ACCEPTS_SMALL_PACKETS | AUDIO_EP_SAMPLE_FREQ_CONTROL),
+
+			.LockDelayUnits           = 0x00,
+			.LockDelay                = 0x0000
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Audio Out Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioOutput/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/Descriptors.h
new file mode 100644
index 000000000..3774cc540
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/Descriptors.h
@@ -0,0 +1,106 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Endpoint address of the Audio isochronous streaming data OUT endpoint. */
+		#define AUDIO_STREAM_EPADDR           (ENDPOINT_DIR_OUT | 1)
+
+		/** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */
+		#define AUDIO_STREAM_EPSIZE           256
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t     Config;
+
+			// Audio Control Interface
+			USB_Descriptor_Interface_t                Audio_ControlInterface;
+			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
+			USB_Audio_Descriptor_InputTerminal_t      Audio_InputTerminal;
+			USB_Audio_Descriptor_OutputTerminal_t     Audio_OutputTerminal;
+
+			// Audio Streaming Interface
+			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt0;
+			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt1;
+			USB_Audio_Descriptor_Interface_AS_t       Audio_StreamInterface_SPC;
+			USB_Audio_Descriptor_Format_t             Audio_AudioFormat;
+			USB_Audio_SampleFreq_t                    Audio_AudioFormatSampleRates[5];
+			USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint;
+			USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
+			INTERFACE_ID_AudioStream  = 1, /**< Audio stream interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioOutput/asf.xml b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/asf.xml
new file mode 100644
index 000000000..f46f3a0f1
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/asf.xml
@@ -0,0 +1,50 @@
+<asf xmlversion="1.0">

+	<project caption="Audio Output Device Demo (Class Driver APIs)" id="lufa.demos.device.class.audio_output.example.avr8">

+		<require idref="lufa.demos.device.class.audio_output"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.audio_output" caption="Audio Output Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Audio 1.0 Output device demo, implementing a basic USB speaker. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="Audio Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="AudioOutput.txt"/>

+

+		<build type="c-source" value="AudioOutput.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="AudioOutput.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

+		<build type="header-file" value="Config/AppConfig.h"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioOutput/doxyfile b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/doxyfile
new file mode 100644
index 000000000..937ef3907
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Audio Output Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = YES
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/AudioOutput/makefile b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/makefile
new file mode 100644
index 000000000..dc4c7bb1c
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/AudioOutput/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = AudioOutput
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualMIDI/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/Config/LUFAConfig.h
new file mode 100644
index 000000000..00eefc7bf
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               2
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualMIDI/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/Descriptors.c
new file mode 100644
index 000000000..a286c5e9e
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/Descriptors.c
@@ -0,0 +1,366 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x206D,
+	.ReleaseNumber          = VERSION_BCD(0,0,2),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces          = 2,
+
+			.ConfigurationNumber      = 1,
+			.ConfigurationStrIndex    = NO_DESCRIPTOR,
+
+			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
+		},
+
+	.Audio_ControlInterface =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioControl,
+			.AlternateSetting         = 0,
+
+			.TotalEndpoints           = 0,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_ControlSubclass,
+			.Protocol                 = AUDIO_CSCP_ControlProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_ControlInterface_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
+
+			.ACSpecification          = VERSION_BCD(1,0,0),
+			.TotalLength              = sizeof(USB_Audio_Descriptor_Interface_AC_t),
+
+			.InCollection             = 1,
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+		},
+
+	.Audio_StreamInterface =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+			.AlternateSetting         = 0,
+
+			.TotalEndpoints           = 2,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_MIDIStreamingSubclass,
+			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_AudioInterface_AS_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
+
+			.AudioSpecification       = VERSION_BCD(1,0,0),
+
+			.TotalLength              = (sizeof(USB_Descriptor_Configuration_t) -
+			                             offsetof(USB_Descriptor_Configuration_t, Audio_StreamInterface_SPC))
+		},
+
+	.MIDI_In_Jack_Emb =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_Embedded,
+			.JackID                   = 0x01,
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_In_Jack_Emb2 =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_Embedded,
+			.JackID                   = 0x02,
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_In_Jack_Ext =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_External,
+			.JackID                   = 0x03,
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_In_Jack_Ext2 =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_External,
+			.JackID                   = 0x04,
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_Out_Jack_Emb =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_Embedded,
+			.JackID                   = 0x05,
+
+			.NumberOfPins             = 1,
+			.SourceJackID             = {0x03},
+			.SourcePinID              = {0x01},
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_Out_Jack_Emb2 =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_Embedded,
+			.JackID                   = 0x06,
+
+			.NumberOfPins             = 1,
+			.SourceJackID             = {0x04},
+			.SourcePinID              = {0x01},
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_Out_Jack_Ext =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_External,
+			.JackID                   = 0x07,
+
+			.NumberOfPins             = 1,
+			.SourceJackID             = {0x01},
+			.SourcePinID              = {0x01},
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_Out_Jack_Ext2 =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_External,
+			.JackID                   = 0x08,
+
+			.NumberOfPins             = 1,
+			.SourceJackID             = {0x02},
+			.SourcePinID              = {0x01},
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_In_Jack_Endpoint =
+		{
+			.Endpoint =
+				{
+					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
+
+					.EndpointAddress     = MIDI_STREAM_OUT_EPADDR,
+					.Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+					.EndpointSize        = MIDI_STREAM_EPSIZE,
+					.PollingIntervalMS   = 0x05
+				},
+
+			.Refresh                  = 0,
+			.SyncEndpointNumber       = 0
+		},
+
+	.MIDI_In_Jack_Endpoint_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_DualJack_Endpoint_t), .Type = DTYPE_CSEndpoint},
+			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
+
+			.TotalEmbeddedJacks       = 0x02,
+			.AssociatedJackID         = {0x01, 0x02}
+		},
+
+	.MIDI_Out_Jack_Endpoint =
+		{
+			.Endpoint =
+				{
+					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
+
+					.EndpointAddress     = MIDI_STREAM_IN_EPADDR,
+					.Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+					.EndpointSize        = MIDI_STREAM_EPSIZE,
+					.PollingIntervalMS   = 0x05
+				},
+
+			.Refresh                  = 0,
+			.SyncEndpointNumber       = 0
+		},
+
+	.MIDI_Out_Jack_Endpoint_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_DualJack_Endpoint_t), .Type = DTYPE_CSEndpoint},
+			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
+
+			.TotalEmbeddedJacks       = 0x02,
+			.AssociatedJackID         = {0x05, 0x06}
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Dual MIDI Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualMIDI/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/Descriptors.h
new file mode 100644
index 000000000..a7ce6d2cd
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/Descriptors.h
@@ -0,0 +1,124 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+	/* Macros: */
+		/** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */
+		#define MIDI_STREAM_IN_EPADDR       (ENDPOINT_DIR_IN  | 2)
+
+		/** Endpoint address of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */
+		#define MIDI_STREAM_OUT_EPADDR      (ENDPOINT_DIR_OUT | 1)
+
+		/** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */
+		#define MIDI_STREAM_EPSIZE          64
+
+	/* Type Defines: */
+ 		/** Type define for a dual jack endpoint descriptor. This is identical to the LUFA MIDI class driver's
+ 		 *  USB_MIDI_Descriptor_Jack_Endpoint_t, except that it contains two jack association entries.
+ 		 */
+		typedef struct
+		{
+			USB_Descriptor_Header_t   Header; /**< Regular descriptor header containing the descriptor's type and length. */
+			uint8_t                   Subtype; /**< Sub type value used to distinguish between audio class-specific descriptors. */
+
+			uint8_t                   TotalEmbeddedJacks; /**< Total number of jacks inside this endpoint. */
+			uint8_t                   AssociatedJackID[2]; /**< IDs of each jack inside the endpoint. */
+		} ATTR_PACKED USB_MIDI_Descriptor_DualJack_Endpoint_t;
+
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t     Config;
+
+			// MIDI Audio Control Interface
+			USB_Descriptor_Interface_t                Audio_ControlInterface;
+			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
+
+			// MIDI Audio Streaming Interface
+			USB_Descriptor_Interface_t                Audio_StreamInterface;
+			USB_MIDI_Descriptor_AudioInterface_AS_t   Audio_StreamInterface_SPC;
+			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Emb;
+			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Emb2;
+			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Ext;
+			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Ext2;
+			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Emb;
+			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Emb2;
+			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Ext;
+			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Ext2;
+			USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_In_Jack_Endpoint;
+			USB_MIDI_Descriptor_DualJack_Endpoint_t   MIDI_In_Jack_Endpoint_SPC;
+			USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_Out_Jack_Endpoint;
+			USB_MIDI_Descriptor_DualJack_Endpoint_t   MIDI_Out_Jack_Endpoint_SPC;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
+			INTERFACE_ID_AudioStream  = 1, /**< Audio streaming interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualMIDI/DualMIDI.c b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/DualMIDI.c
new file mode 100644
index 000000000..b31f60249
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/DualMIDI.c
@@ -0,0 +1,211 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the Dual MIDI demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "DualMIDI.h"
+
+/** LUFA MIDI Class driver interface configuration and state information. This structure is
+ *  passed to all MIDI Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_MIDI_Device_t Keyboard_MIDI_Interface =
+	{
+		.Config =
+			{
+				.StreamingInterfaceNumber = INTERFACE_ID_AudioStream,
+				.DataINEndpoint           =
+					{
+						.Address          = MIDI_STREAM_IN_EPADDR,
+						.Size             = MIDI_STREAM_EPSIZE,
+						.Banks            = 1,
+					},
+				.DataOUTEndpoint          =
+					{
+						.Address          = MIDI_STREAM_OUT_EPADDR,
+						.Size             = MIDI_STREAM_EPSIZE,
+						.Banks            = 1,
+					},
+			},
+	};
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		CheckJoystickMovement();
+
+		MIDI_EventPacket_t ReceivedMIDIEvent;
+		while (MIDI_Device_ReceiveEventPacket(&Keyboard_MIDI_Interface, &ReceivedMIDIEvent))
+		{
+			if ((ReceivedMIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)) && (ReceivedMIDIEvent.Data3 > 0))
+			  LEDs_SetAllLEDs(ReceivedMIDIEvent.Data2 > 64 ? LEDS_LED1 : LEDS_LED2);
+			else
+			  LEDs_SetAllLEDs(LEDS_NO_LEDS);
+		}
+
+		MIDI_Device_USBTask(&Keyboard_MIDI_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	Buttons_Init();
+	USB_Init();
+}
+
+/** Checks for changes in the position of the board joystick, sending MIDI events to the host upon each change. */
+void CheckJoystickMovement(void)
+{
+	static uint8_t PrevJoystickStatus;
+
+	uint8_t MIDICommand = 0;
+	uint8_t MIDIPitch;
+
+	/* Get current joystick mask, XOR with previous to detect joystick changes */
+	uint8_t JoystickStatus  = Joystick_GetStatus();
+	uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);
+
+	/* Get board button status - if pressed use second virtual cable, otherwise use the first */
+	uint8_t VirtualCable = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? 1 : 0;
+
+	if (JoystickChanges & JOY_LEFT)
+	{
+		MIDICommand = ((JoystickStatus & JOY_LEFT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+		MIDIPitch   = 0x3C;
+	}
+
+	if (JoystickChanges & JOY_UP)
+	{
+		MIDICommand = ((JoystickStatus & JOY_UP)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+		MIDIPitch   = 0x3D;
+	}
+
+	if (JoystickChanges & JOY_RIGHT)
+	{
+		MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+		MIDIPitch   = 0x3E;
+	}
+
+	if (JoystickChanges & JOY_DOWN)
+	{
+		MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+		MIDIPitch   = 0x3F;
+	}
+
+	if (JoystickChanges & JOY_PRESS)
+	{
+		MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+		MIDIPitch   = 0x3B;
+	}
+
+	if (MIDICommand)
+	{
+		MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
+			{
+				.Event       = MIDI_EVENT(VirtualCable, MIDICommand),
+
+				.Data1       = MIDICommand | MIDI_CHANNEL(1),
+				.Data2       = MIDIPitch,
+				.Data3       = MIDI_STANDARD_VELOCITY,
+			};
+
+		MIDI_Device_SendEventPacket(&Keyboard_MIDI_Interface, &MIDIEvent);
+		MIDI_Device_Flush(&Keyboard_MIDI_Interface);
+	}
+
+	PrevJoystickStatus = JoystickStatus;
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= MIDI_Device_ConfigureEndpoints(&Keyboard_MIDI_Interface);
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	MIDI_Device_ProcessControlRequest(&Keyboard_MIDI_Interface);
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualMIDI/DualMIDI.h b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/DualMIDI.h
new file mode 100644
index 000000000..3b0dac3be
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/DualMIDI.h
@@ -0,0 +1,78 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for DualMIDI.c.
+ */
+
+#ifndef _DUAL_MIDI_H_
+#define _DUAL_MIDI_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdbool.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void CheckJoystickMovement(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualMIDI/DualMIDI.txt b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/DualMIDI.txt
new file mode 100644
index 000000000..19d4dbc04
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/DualMIDI.txt
@@ -0,0 +1,78 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage MIDI Dual Input Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Audio Class</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Standard Audio Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Audio Class Specification \n
+ *        USB-MIDI Audio Class Extension Specification \n
+ *        General MIDI Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Dual MIDI demonstration application. This gives a simple reference
+ *  application for implementing the USB-MIDI class in USB devices.
+ *  It is built upon the USB Audio class.
+ *
+ *  Joystick movements are translated into note on/off messages and
+ *  are sent to the host PC as MIDI streams which can be read by any
+ *  MIDI program supporting MIDI IN devices.
+ *
+ *  If the HWB is not pressed, the first virtual MIDI cable to the host is
+ *  used. If the HWB is pressed, then the second virtual cable is selected.
+ *
+ *  This device implements MIDI-THRU mode, with the IN MIDI data being
+ *  generated by the device itself. OUT MIDI data is discarded.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualMIDI/asf.xml b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/asf.xml
new file mode 100644
index 000000000..ba85a3b56
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/asf.xml
@@ -0,0 +1,62 @@
+<asf xmlversion="1.0">
+	<project caption="Dual MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_midi.example.avr8">
+		<require idref="lufa.demos.device.class.dual_midi"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+	</project>
+
+	<project caption="MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_midi.example.xmega">
+		<require idref="lufa.demos.device.class.dual_midi"/>
+		<require idref="lufa.boards.dummy.xmega"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atxmega128a1u"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
+	</project>
+
+	<module type="application" id="lufa.demos.device.class.dual_midi" caption="Dual MIDI Device Demo (Class Driver APIs)">
+		<info type="description" value="summary">
+		Dual MIDI device demo, implementing a basic USB MIDI device with two virtual cables that can send messages to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Class Driver APIs"/>
+			<keyword value="USB Device"/>
+			<keyword value="MIDI Class"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="DualMIDI.txt"/>
+
+		<build type="c-source" value="DualMIDI.c"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="DualMIDI.h"/>
+		<build type="header-file" value="Descriptors.h"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.joystick"/>
+	</module>
+</asf>
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualMIDI/doxyfile b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/doxyfile
new file mode 100644
index 000000000..879aae3e8
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Dual MIDI Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualMIDI/makefile b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/makefile
new file mode 100644
index 000000000..04e06d1df
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualMIDI/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = DualMIDI
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/Config/LUFAConfig.h
new file mode 100644
index 000000000..070eac471
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               6
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c
new file mode 100644
index 000000000..553223a2b
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c
@@ -0,0 +1,360 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_IADDeviceClass,
+	.SubClass               = USB_CSCP_IADDeviceSubclass,
+	.Protocol               = USB_CSCP_IADDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x204E,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 4,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.CDC1_IAD =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
+
+			.FirstInterfaceIndex    = INTERFACE_ID_CDC1_CCI,
+			.TotalInterfaces        = 2,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.IADStrIndex            = NO_DESCRIPTOR
+		},
+
+	.CDC1_CCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC1_CCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC1_Functional_Header =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
+
+			.CDCSpecification       = VERSION_BCD(1,1,0),
+		},
+
+	.CDC1_Functional_ACM =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
+
+			.Capabilities           = 0x06,
+		},
+
+	.CDC1_Functional_Union =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
+
+			.MasterInterfaceNumber  = INTERFACE_ID_CDC1_CCI,
+			.SlaveInterfaceNumber   = INTERFACE_ID_CDC1_DCI,
+		},
+
+	.CDC1_ManagementEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC1_NOTIFICATION_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
+			.PollingIntervalMS      = 0xFF
+		},
+
+	.CDC1_DCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC1_DCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = CDC_CSCP_CDCDataClass,
+			.SubClass               = CDC_CSCP_NoDataSubclass,
+			.Protocol               = CDC_CSCP_NoDataProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC1_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC1_RX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.CDC1_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC1_TX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.CDC2_IAD =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
+
+			.FirstInterfaceIndex    = INTERFACE_ID_CDC2_CCI,
+			.TotalInterfaces        = 2,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.IADStrIndex            = NO_DESCRIPTOR
+		},
+
+	.CDC2_CCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC2_CCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC2_Functional_Header =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
+
+			.CDCSpecification       = VERSION_BCD(1,1,0),
+		},
+
+	.CDC2_Functional_ACM =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
+
+			.Capabilities           = 0x06,
+		},
+
+	.CDC2_Functional_Union =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
+
+			.MasterInterfaceNumber  = INTERFACE_ID_CDC2_CCI,
+			.SlaveInterfaceNumber   = INTERFACE_ID_CDC2_DCI,
+		},
+
+	.CDC2_ManagementEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC2_NOTIFICATION_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
+			.PollingIntervalMS      = 0xFF
+		},
+
+	.CDC2_DCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC2_DCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = CDC_CSCP_CDCDataClass,
+			.SubClass               = CDC_CSCP_NoDataSubclass,
+			.Protocol               = CDC_CSCP_NoDataProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC2_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC2_RX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.CDC2_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC2_TX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Dual CDC Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h
new file mode 100644
index 000000000..dfc7a7793
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h
@@ -0,0 +1,135 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Macros: */
+		/** Endpoint address of the first CDC interface's device-to-host data IN endpoint. */
+		#define CDC1_TX_EPADDR                 (ENDPOINT_DIR_IN  | 1)
+
+		/** Endpoint address of the first CDC interface's host-to-device data OUT endpoint. */
+		#define CDC1_RX_EPADDR                 (ENDPOINT_DIR_OUT | 2)
+
+		/** Endpoint address of the first CDC interface's device-to-host notification IN endpoint. */
+		#define CDC1_NOTIFICATION_EPADDR       (ENDPOINT_DIR_IN  | 3)
+
+		/** Endpoint address of the second CDC interface's device-to-host data IN endpoint. */
+		#define CDC2_TX_EPADDR                 (ENDPOINT_DIR_IN  | 4)
+
+		/** Endpoint address of the second CDC interface's host-to-device data OUT endpoint. */
+		#define CDC2_RX_EPADDR                 (ENDPOINT_DIR_OUT | 5)
+
+		/** Endpoint address of the second CDC interface's device-to-host notification IN endpoint. */
+		#define CDC2_NOTIFICATION_EPADDR       (ENDPOINT_DIR_IN  | 6)
+
+		/** Size in bytes of the CDC device-to-host notification IN endpoints. */
+		#define CDC_NOTIFICATION_EPSIZE        8
+
+		/** Size in bytes of the CDC data IN and OUT endpoints. */
+		#define CDC_TXRX_EPSIZE                16
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t    Config;
+
+			// First CDC Control Interface
+			USB_Descriptor_Interface_Association_t   CDC1_IAD;
+			USB_Descriptor_Interface_t               CDC1_CCI_Interface;
+			USB_CDC_Descriptor_FunctionalHeader_t    CDC1_Functional_Header;
+			USB_CDC_Descriptor_FunctionalACM_t       CDC1_Functional_ACM;
+			USB_CDC_Descriptor_FunctionalUnion_t     CDC1_Functional_Union;
+			USB_Descriptor_Endpoint_t                CDC1_ManagementEndpoint;
+
+			// First CDC Data Interface
+			USB_Descriptor_Interface_t               CDC1_DCI_Interface;
+			USB_Descriptor_Endpoint_t                CDC1_DataOutEndpoint;
+			USB_Descriptor_Endpoint_t                CDC1_DataInEndpoint;
+
+			// Second CDC Control Interface
+			USB_Descriptor_Interface_Association_t   CDC2_IAD;
+			USB_Descriptor_Interface_t               CDC2_CCI_Interface;
+			USB_CDC_Descriptor_FunctionalHeader_t    CDC2_Functional_Header;
+			USB_CDC_Descriptor_FunctionalACM_t       CDC2_Functional_ACM;
+			USB_CDC_Descriptor_FunctionalUnion_t     CDC2_Functional_Union;
+			USB_Descriptor_Endpoint_t                CDC2_ManagementEndpoint;
+
+			// Second CDC Data Interface
+			USB_Descriptor_Interface_t               CDC2_DCI_Interface;
+			USB_Descriptor_Endpoint_t                CDC2_DataOutEndpoint;
+			USB_Descriptor_Endpoint_t                CDC2_DataInEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_CDC1_CCI = 0, /**< CDC1 CCI interface descriptor ID */
+			INTERFACE_ID_CDC1_DCI = 1, /**< CDC1 DCI interface descriptor ID */
+			INTERFACE_ID_CDC2_CCI = 2, /**< CDC2 CCI interface descriptor ID */
+			INTERFACE_ID_CDC2_DCI = 3, /**< CDC2 DCI interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c
new file mode 100644
index 000000000..9a7ff4725
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c
@@ -0,0 +1,242 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the DualVirtualSerial demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "DualVirtualSerial.h"
+
+/** LUFA CDC Class driver interface configuration and state information. This structure is
+ *  passed to all CDC Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another. This is for the first CDC interface,
+ *  which sends strings to the host for each joystick movement.
+ */
+USB_ClassInfo_CDC_Device_t VirtualSerial1_CDC_Interface =
+	{
+		.Config =
+			{
+				.ControlInterfaceNumber   = INTERFACE_ID_CDC1_CCI,
+				.DataINEndpoint           =
+					{
+						.Address          = CDC1_TX_EPADDR,
+						.Size             = CDC_TXRX_EPSIZE,
+						.Banks            = 1,
+					},
+				.DataOUTEndpoint =
+					{
+						.Address          = CDC1_RX_EPADDR,
+						.Size             = CDC_TXRX_EPSIZE,
+						.Banks            = 1,
+					},
+				.NotificationEndpoint =
+					{
+						.Address          = CDC1_NOTIFICATION_EPADDR,
+						.Size             = CDC_NOTIFICATION_EPSIZE,
+						.Banks            = 1,
+					},
+			},
+	};
+
+/** LUFA CDC Class driver interface configuration and state information. This structure is
+ *  passed to all CDC Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another. This is for the second CDC interface,
+ *  which echos back all received data from the host.
+ */
+USB_ClassInfo_CDC_Device_t VirtualSerial2_CDC_Interface =
+	{
+		.Config =
+			{
+				.ControlInterfaceNumber   = INTERFACE_ID_CDC2_CCI,
+				.DataINEndpoint           =
+					{
+						.Address          = CDC2_TX_EPADDR,
+						.Size             = CDC_TXRX_EPSIZE,
+						.Banks            = 1,
+					},
+				.DataOUTEndpoint =
+					{
+						.Address          = CDC2_RX_EPADDR,
+						.Size             = CDC_TXRX_EPSIZE,
+						.Banks            = 1,
+					},
+				.NotificationEndpoint =
+					{
+						.Address          = CDC2_NOTIFICATION_EPADDR,
+						.Size             = CDC_NOTIFICATION_EPSIZE,
+						.Banks            = 1,
+					},
+
+			},
+	};
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		CheckJoystickMovement();
+
+		/* Discard all received data on the first CDC interface */
+		CDC_Device_ReceiveByte(&VirtualSerial1_CDC_Interface);
+
+		/* Echo all received data on the second CDC interface */
+		int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial2_CDC_Interface);
+		if (!(ReceivedByte < 0))
+		  CDC_Device_SendByte(&VirtualSerial2_CDC_Interface, (uint8_t)ReceivedByte);
+
+		CDC_Device_USBTask(&VirtualSerial1_CDC_Interface);
+		CDC_Device_USBTask(&VirtualSerial2_CDC_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Checks for changes in the position of the board joystick, sending strings to the host upon each change
+ *  through the first of the CDC interfaces.
+ */
+void CheckJoystickMovement(void)
+{
+	uint8_t     JoyStatus_LCL = Joystick_GetStatus();
+	char*       ReportString  = NULL;
+	static bool ActionSent = false;
+
+	if (JoyStatus_LCL & JOY_UP)
+	  ReportString = "Joystick Up\r\n";
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  ReportString = "Joystick Down\r\n";
+	else if (JoyStatus_LCL & JOY_LEFT)
+	  ReportString = "Joystick Left\r\n";
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  ReportString = "Joystick Right\r\n";
+	else if (JoyStatus_LCL & JOY_PRESS)
+	  ReportString = "Joystick Pressed\r\n";
+	else
+	  ActionSent = false;
+
+	if ((ReportString != NULL) && (ActionSent == false))
+	{
+		ActionSent = true;
+
+		CDC_Device_SendString(&VirtualSerial1_CDC_Interface, ReportString);
+	}
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial1_CDC_Interface);
+	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial2_CDC_Interface);
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	CDC_Device_ProcessControlRequest(&VirtualSerial1_CDC_Interface);
+	CDC_Device_ProcessControlRequest(&VirtualSerial2_CDC_Interface);
+}
+
+/** CDC class driver callback function the processing of changes to the virtual
+ *  control lines sent from the host..
+ *
+ *  \param[in] CDCInterfaceInfo  Pointer to the CDC class interface configuration structure being referenced
+ */
+void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t *const CDCInterfaceInfo)
+{
+	/* You can get changes to the virtual CDC lines in this callback; a common
+	   use-case is to use the Data Terminal Ready (DTR) flag to enable and
+	   disable CDC communications in your application when set to avoid the
+	   application blocking while waiting for a host to become ready and read
+	   in the pending data from the USB endpoints.
+	*/
+	bool HostReady = (CDCInterfaceInfo->State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR) != 0;
+
+	if (CDCInterfaceInfo == &VirtualSerial1_CDC_Interface)
+	{
+		// CDC interface 1's host is ready to send/receive data
+	}
+	else
+	{
+		// CDC interface 2's host is ready to send/receive data
+	}
+}
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h
new file mode 100644
index 000000000..28d125adf
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h
@@ -0,0 +1,76 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for DualVirtualSerial.c.
+ */
+
+#ifndef _DUAL_VIRTUALSERIAL_H_
+#define _DUAL_VIRTUALSERIAL_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void CheckJoystickMovement(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt
new file mode 100644
index 000000000..c325e9ced
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt
@@ -0,0 +1,89 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Dual Communications Device Class (Dual Virtual Serial Port) Device
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Abstract Control Model (ACM)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF CDC Class Standard</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Interface Association Descriptor ECN \n
+ *        USBIF CDC Class Standard</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Dual Communications Device Class demonstration application.
+ *  This gives a simple reference application for implementing
+ *  a composite device with dual CDC functions acting as a pair
+ *  of virtual serial ports. This demo uses Interface Association
+ *  Descriptors to link together the pair of related CDC
+ *  descriptors for each virtual serial port, which may not be
+ *  supported in all OSes - Windows Vista is supported, as is
+ *  XP (although the latter may need a hotfix to function).
+ *
+ *  Joystick actions are transmitted to the host as strings
+ *  through the first serial port. The device does not respond to
+ *  serial data sent from the host in the first serial port.
+ *
+ *  The second serial port echoes back data sent from the host.
+ *
+ *  After running this demo for the first time on a new computer,
+ *  you will need to supply the .INF file located in this demo
+ *  project's directory as the device's driver when running under
+ *  Windows. This will enable Windows to use its inbuilt CDC drivers,
+ *  negating the need for custom drivers for the device. Other
+ *  Operating Systems should automatically use their own inbuilt
+ *  CDC-ACM drivers.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/LUFA DualVirtualSerial.inf b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/LUFA DualVirtualSerial.inf
new file mode 100644
index 000000000..1a0e0248a
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/LUFA DualVirtualSerial.inf
@@ -0,0 +1,66 @@
+;************************************************************
+; Windows USB CDC ACM Setup File
+; Copyright (c) 2000 Microsoft Corporation
+;************************************************************
+
+[DefaultInstall]
+CopyINF="LUFA DualVirtualSerial.inf"
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%MFGNAME%
+DriverVer=7/1/2012,10.0.0.0
+
+[Manufacturer]
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
+
+[SourceDisksNames]
+
+[SourceDisksFiles]
+
+[DestinationDirs]
+DefaultDestDir=12
+
+[DriverInstall]
+Include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.AddReg
+
+[DriverInstall.Services]
+Include=mdmcpq.inf
+AddService=usbser, 0x00000002, LowerFilter_Service_Inst
+
+[DriverInstall.AddReg]
+HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
+
+;------------------------------------------------------------------------------
+;  Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID.  Use the format as shown below.
+; Note: One INF file can be used for multiple devices with different VID and PIDs.
+; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
+
+[DeviceList.NTx86]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
+
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
+
+;------------------------------------------------------------------------------
+;  String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+MFGNAME="http://www.lufa-lib.org"
+DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"
\ No newline at end of file
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/asf.xml b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/asf.xml
new file mode 100644
index 000000000..e00f33995
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/asf.xml
@@ -0,0 +1,62 @@
+<asf xmlversion="1.0">

+	<project caption="Dual Virtual Serial Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_cdc.example.avr8">

+		<require idref="lufa.demos.device.class.dual_cdc"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Dual Virtual Serial Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_cdc.example.xmega">

+		<require idref="lufa.demos.device.class.dual_cdc"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.dual_cdc" caption="Dual Virtual Serial Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Dual Virtual Serial (CDC) demo, implementing a pair of virtual serial port interfaces. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="CDC Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="DualVirtualSerial.txt"/>

+		<build type="distribute" subtype="user-file" value="LUFA DualVirtualSerial.inf"/>

+

+		<build type="c-source" value="DualVirtualSerial.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="DualVirtualSerial.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.joystick"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/doxyfile b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/doxyfile
new file mode 100644
index 000000000..40dcfe915
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Dual Virtual Serial Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/makefile
new file mode 100644
index 000000000..3bdd0259b
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = DualVirtualSerial
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/GenericHID/Config/AppConfig.h b/lib/lufa/Demos/Device/ClassDriver/GenericHID/Config/AppConfig.h
new file mode 100644
index 000000000..636200ec6
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/GenericHID/Config/AppConfig.h
@@ -0,0 +1,48 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define GENERIC_REPORT_SIZE       8
+
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/GenericHID/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/GenericHID/Config/LUFAConfig.h
new file mode 100644
index 000000000..299d2ec85
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/GenericHID/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               1
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/GenericHID/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/GenericHID/Descriptors.c
new file mode 100644
index 000000000..c0f1b0de9
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/GenericHID/Descriptors.c
@@ -0,0 +1,220 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** HID class report descriptor. This is a special descriptor constructed with values from the
+ *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
+ *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
+ *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
+ *  more details on HID report descriptors.
+ */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] =
+{
+	/* Use the HID class driver's standard Vendor HID report.
+	 *  Vendor Usage Page: 0
+	 *  Vendor Collection Usage: 1
+	 *  Vendor Report IN Usage: 2
+	 *  Vendor Report OUT Usage: 3
+	 *  Vendor Report Size: GENERIC_REPORT_SIZE
+	 */
+	HID_DESCRIPTOR_VENDOR(0x00, 0x01, 0x02, 0x03, GENERIC_REPORT_SIZE)
+};
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x204F,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.HID_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_GenericHID,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_NonBootSubclass,
+			.Protocol               = HID_CSCP_NonBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID_GenericHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(GenericReport)
+		},
+
+	.HID_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = GENERIC_IN_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = GENERIC_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Generic HID Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+		case HID_DTYPE_HID:
+			Address = &ConfigurationDescriptor.HID_GenericHID;
+			Size    = sizeof(USB_HID_Descriptor_HID_t);
+			break;
+		case HID_DTYPE_Report:
+			Address = &GenericReport;
+			Size    = sizeof(GenericReport);
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/GenericHID/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/GenericHID/Descriptors.h
new file mode 100644
index 000000000..4fa644ff2
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/GenericHID/Descriptors.h
@@ -0,0 +1,95 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include "Config/AppConfig.h"
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Generic HID Interface
+			USB_Descriptor_Interface_t            HID_Interface;
+			USB_HID_Descriptor_HID_t              HID_GenericHID;
+			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_GenericHID = 0, /**< GenericHID interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Macros: */
+		/** Endpoint address of the Generic HID reporting IN endpoint. */
+		#define GENERIC_IN_EPADDR         (ENDPOINT_DIR_IN | 1)
+
+		/** Size in bytes of the Generic HID reporting endpoint. */
+		#define GENERIC_EPSIZE            8
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/GenericHID/GenericHID.c b/lib/lufa/Demos/Device/ClassDriver/GenericHID/GenericHID.c
new file mode 100644
index 000000000..d7f3e3c23
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/GenericHID/GenericHID.c
@@ -0,0 +1,202 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the GenericHID demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "GenericHID.h"
+
+/** Buffer to hold the previously generated HID report, for comparison purposes inside the HID class driver. */
+static uint8_t PrevHIDReportBuffer[GENERIC_REPORT_SIZE];
+
+/** LUFA HID Class driver interface configuration and state information. This structure is
+ *  passed to all HID Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_HID_Device_t Generic_HID_Interface =
+	{
+		.Config =
+			{
+				.InterfaceNumber              = INTERFACE_ID_GenericHID,
+				.ReportINEndpoint             =
+					{
+						.Address              = GENERIC_IN_EPADDR,
+						.Size                 = GENERIC_EPSIZE,
+						.Banks                = 1,
+					},
+				.PrevReportINBuffer           = PrevHIDReportBuffer,
+				.PrevReportINBufferSize       = sizeof(PrevHIDReportBuffer),
+			},
+	};
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		HID_Device_USBTask(&Generic_HID_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Generic_HID_Interface);
+
+	USB_Device_EnableSOFEvents();
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	HID_Device_ProcessControlRequest(&Generic_HID_Interface);
+}
+
+/** Event handler for the USB device Start Of Frame event. */
+void EVENT_USB_Device_StartOfFrame(void)
+{
+	HID_Device_MillisecondElapsed(&Generic_HID_Interface);
+}
+
+/** HID class driver callback function for the creation of HID reports to the host.
+ *
+ *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
+ *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
+ *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
+ *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
+ *
+ *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
+ */
+bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                         uint8_t* const ReportID,
+                                         const uint8_t ReportType,
+                                         void* ReportData,
+                                         uint16_t* const ReportSize)
+{
+	uint8_t* Data        = (uint8_t*)ReportData;
+	uint8_t  CurrLEDMask = LEDs_GetLEDs();
+
+	Data[0] = ((CurrLEDMask & LEDS_LED1) ? 1 : 0);
+	Data[1] = ((CurrLEDMask & LEDS_LED2) ? 1 : 0);
+	Data[2] = ((CurrLEDMask & LEDS_LED3) ? 1 : 0);
+	Data[3] = ((CurrLEDMask & LEDS_LED4) ? 1 : 0);
+
+	*ReportSize = GENERIC_REPORT_SIZE;
+	return false;
+}
+
+/** HID class driver callback function for the processing of HID reports from the host.
+ *
+ *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in] ReportID    Report ID of the received report from the host
+ *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
+ *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
+ *  \param[in] ReportSize  Size in bytes of the received HID report
+ */
+void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                          const uint8_t ReportID,
+                                          const uint8_t ReportType,
+                                          const void* ReportData,
+                                          const uint16_t ReportSize)
+{
+	uint8_t* Data       = (uint8_t*)ReportData;
+	uint8_t  NewLEDMask = LEDS_NO_LEDS;
+
+	if (Data[0])
+	  NewLEDMask |= LEDS_LED1;
+
+	if (Data[1])
+	  NewLEDMask |= LEDS_LED2;
+
+	if (Data[2])
+	  NewLEDMask |= LEDS_LED3;
+
+	if (Data[3])
+	  NewLEDMask |= LEDS_LED4;
+
+	LEDs_SetAllLEDs(NewLEDMask);
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/GenericHID/GenericHID.h b/lib/lufa/Demos/Device/ClassDriver/GenericHID/GenericHID.h
new file mode 100644
index 000000000..0528585a6
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/GenericHID/GenericHID.h
@@ -0,0 +1,87 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for GenericHID.c.
+ */
+
+#ifndef _GENERICHID_H_
+#define _GENERICHID_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+		#include "Config/AppConfig.h"
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+		void EVENT_USB_Device_StartOfFrame(void);
+
+		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                         uint8_t* const ReportID,
+		                                         const uint8_t ReportType,
+		                                         void* ReportData,
+		                                         uint16_t* const ReportSize);
+		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                          const uint8_t ReportID,
+		                                          const uint8_t ReportType,
+		                                          const void* ReportData,
+		                                          const uint16_t ReportSize);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/GenericHID/GenericHID.txt b/lib/lufa/Demos/Device/ClassDriver/GenericHID/GenericHID.txt
new file mode 100644
index 000000000..0d780f49d
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/GenericHID/GenericHID.txt
@@ -0,0 +1,79 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Generic HID Device
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Human Interface Device (HID)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>N/A</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Low Speed Mode \n
+ *        Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Generic HID device demonstration application. This gives a simple reference application
+ *  for implementing a generic HID device, using the basic USB HID drivers in all modern
+ *  OSes (i.e. no special drivers required). By default it accepts and sends up to 8 byte reports
+ *  to and from a USB Host, and transmits the last sent report back to the host.
+ *
+ *  On start-up the system will automatically enumerate and function as a vendor HID device.
+ *  When controlled by a custom HID class application, reports can be sent and received by
+ *  both the standard data endpoint and control request methods defined in the HID specification.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>GENERIC_REPORT_SIZE</td>
+ *    <td>AppConfig.h</td>
+ *    <td>This token defines the size of the device reports, both sent and received (including report ID byte). The value
+ *        must be an integer ranging from 1 to 255.</td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_libusb.js b/lib/lufa/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_libusb.js
new file mode 100755
index 000000000..363786429
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_libusb.js
@@ -0,0 +1,143 @@
+#!/usr/bin/env node
+
+//             LUFA Library
+//     Copyright (C) Dean Camera, 2017.
+//
+//  dean [at] fourwalledcubicle [dot] com
+//           www.lufa-lib.org
+
+// LUFA Generic HID device demo host test script. This script will send a
+// continuous stream of generic reports to the device, to show a variable LED
+// pattern on the target board. Send and received report data is printed to
+// the terminal.
+//
+// You have to install the usb and async modules prior to executing this script:
+// apt-get install libusb-1.0-0-dev
+// npm install usb async sprintf
+
+var usb = require('usb');
+var async = require('async');
+var sprintf = require('sprintf');
+
+var deviceVid = 0x03EB;
+var devicePid = 0x204F;
+var reportLength = 8;
+
+function getAndInitHidDeviceAndInterface()
+{
+    device = usb.findByIds(deviceVid, devicePid);
+    if (!device) {
+        console.log('No device found');
+        process.exit(1);
+    }
+    device.open();
+
+    var hidInterface = device.interface(0);
+    if (hidInterface.isKernelDriverActive()) {
+        hidInterface.detachKernelDriver();
+    }
+    hidInterface.claim();
+
+    async.series([
+        function(callback) {
+            setConfiguration(0, function(error, data) {
+                callback();
+            });
+        }
+    ]);
+
+    return {hidDevice:device, hidInterface:hidInterface};
+}
+
+function read(hidInterface, callback)
+{
+    endpoint = hidInterface.endpoints[0];
+    endpoint.transfer(reportLength, function(error, data) {
+        if (error) {
+            console.log(error)
+        } else {
+            console.log("Received LED Pattern:", data.slice(0, 4));
+        }
+        callback();
+    });
+}
+
+function write(hidDevice, message, callback)
+{
+    hidDevice.controlTransfer(    // Send a Set Report control request
+        parseInt('00100001', 2),  // bmRequestType (constant for this control request)
+        0x09,                     // bmRequest (constant for this control request)
+        0x0809,                   // wValue (MSB is report type, LSB is report number)
+        0,                        // wIndex (interface number)
+        message,                  // message to be sent
+        function(error, data) {   // callback to be executed upon finishing the transfer
+            console.log("Sent LED Pattern:", message.slice(1, 5))
+            callback();
+        }
+    );
+}
+
+function setConfiguration(configurationNumber, callback)
+{
+    device.controlTransfer(                 // Send a Set Configuration control request
+        parseInt('00000000', 2),            // bmRequestType
+        0x09,                               // bmRequest
+        0,                                  // wValue (Configuration value)
+        0,                                  // wIndex
+        new Buffer(0),                      // message to be sent
+        callback                            // callback to be executed upon finishing the transfer
+    );
+}
+
+// @TODO: Fix this function because apparently it doesn't work for some reason.
+function getStringDescriptor(stringId, languageId, callback)
+{
+    var STRING_DESCRIPTOR_TYPE = 0x03;
+    var wValue = (STRING_DESCRIPTOR_TYPE << 8) | stringId;
+
+    device.controlTransfer(       // Send a Get Descriptor control request
+        parseInt('10000000', 2),  // bmRequestType
+        0x06,                     // bmRequest
+        wValue,                   // wValue
+        languageId,               // wIndex
+        64,                       // response length
+        callback                  // callback to be executed upon finishing the transfer
+    );
+}
+
+function setNextPattern()
+{
+    var pattern = [
+        hidInterface.interface,
+        (p >> 3) & 1,
+        (p >> 2) & 1,
+        (p >> 1) & 1,
+        (p >> 0) & 1
+    ];
+
+    async.series([
+        function(callback) {
+            write(hidDevice, new Buffer(pattern), callback);
+        },
+        function(callback) {
+            read(hidInterface, callback);
+        },
+        function(callback) {
+            p = (p + 1) % 16
+            setTimeout(setNextPattern, 200);
+            callback();
+        }]);
+}
+
+var hidDeviceAndInterface = getAndInitHidDeviceAndInterface();
+var hidDevice = hidDeviceAndInterface.hidDevice
+var hidInterface = hidDeviceAndInterface.hidInterface;
+
+console.log(sprintf("Connected to device 0x%04X/0x%04X - %s [%s]",
+            hidDevice.deviceDescriptor.idVendor,
+            hidDevice.deviceDescriptor.idProduct,
+            hidDevice.deviceDescriptor.iProduct,
+            hidDevice.deviceDescriptor.iManufacturer));
+
+p = 0
+setNextPattern();
diff --git a/lib/lufa/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_libusb.py b/lib/lufa/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_libusb.py
new file mode 100755
index 000000000..4efa4a0ab
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_libusb.py
@@ -0,0 +1,98 @@
+#!/usr/bin/env python
+
+"""
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+"""
+
+"""
+    LUFA Generic HID device demo host test script. This script will send a
+    continuous stream of generic reports to the device, to show a variable LED
+    pattern on the target board. Send and received report data is printed to
+    the terminal.
+
+    Requires the PyUSB library (http://sourceforge.net/apps/trac/pyusb/).
+"""
+
+import sys
+from time import sleep
+import usb.core
+import usb.util
+
+# Generic HID device VID, PID and report payload length (length is increased
+# by one to account for the Report ID byte that must be pre-pended)
+device_vid = 0x03EB
+device_pid = 0x204F
+
+def get_and_init_hid_device():
+    device = usb.core.find(idVendor=device_vid, idProduct=device_pid)
+
+    if device is None:
+        sys.exit("Could not find USB device.")
+
+    if device.is_kernel_driver_active(0):
+        try:
+            device.detach_kernel_driver(0)
+        except usb.core.USBError as exception:
+            sys.exit("Could not detatch kernel driver: %s" % str(exception))
+
+    try:
+        device.set_configuration()
+    except usb.core.USBError as exception:
+        sys.exit("Could not set configuration: %s" % str(exception))
+
+    return device
+
+def send_led_pattern(device, led1, led2, led3, led4):
+    # Report data for the demo is LED on/off data
+    report_data = [led1, led2, led3, led4]
+
+    # Send the generated report to the device
+    number_of_bytes_written = device.ctrl_transfer(  # Set Report control request
+        0b00100001,  # bmRequestType (constant for this control request)
+        0x09,        # bmRequest (constant for this control request)
+        0,           # wValue (MSB is report type, LSB is report number)
+        0,           # wIndex (interface number)
+        report_data  # report data to be sent
+    );
+    assert number_of_bytes_written == len(report_data)
+
+    print("Sent LED Pattern: {0}".format(report_data))
+
+def receive_led_pattern(hid_device):
+    endpoint = hid_device[0][(0,0)][0]
+    report_data = hid_device.read(endpoint.bEndpointAddress, endpoint.wMaxPacketSize)
+    return list(report_data)
+
+def main():
+    hid_device = get_and_init_hid_device()
+
+    print("Connected to device 0x%04X/0x%04X - %s [%s]" %
+          (hid_device.idVendor, hid_device.idProduct,
+           usb.util.get_string(hid_device, 256, hid_device.iProduct),
+           usb.util.get_string(hid_device, 256, hid_device.iManufacturer)))
+
+    p = 0
+    while (True):
+        # Convert the current pattern index to a bit-mask and send
+        send_led_pattern(hid_device,
+                         (p >> 3) & 1,
+                         (p >> 2) & 1,
+                         (p >> 1) & 1,
+                         (p >> 0) & 1)
+
+        # Receive and print the current LED pattern
+        led_pattern = receive_led_pattern(hid_device)[0:4]
+        print("Received LED Pattern: {0}".format(led_pattern))
+
+        # Compute next LED pattern in sequence
+        p = (p + 1) % 16
+
+        # Delay a bit for visual effect
+        sleep(.2)
+
+if __name__ == '__main__':
+    main()
diff --git a/lib/lufa/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_winusb.py b/lib/lufa/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_winusb.py
new file mode 100644
index 000000000..1e5f43019
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_winusb.py
@@ -0,0 +1,96 @@
+"""
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+"""
+
+"""
+    LUFA Generic HID device demo host test script. This script will send a
+    continuous stream of generic reports to the device, to show a variable LED
+    pattern on the target board. Send and received report data is printed to
+    the terminal.
+
+    Requires the pywinusb library (https://pypi.python.org/pypi/pywinusb/).
+"""
+
+import sys
+from time import sleep
+import pywinusb.hid as hid
+
+# Generic HID device VID, PID and report payload length (length is increased
+# by one to account for the Report ID byte that must be pre-pended)
+device_vid = 0x03EB
+device_pid = 0x204F
+report_length = 1 + 8
+
+
+def get_hid_device_handle():
+    hid_device_filter = hid.HidDeviceFilter(vendor_id=device_vid,
+                                            product_id=device_pid)
+
+    valid_hid_devices = hid_device_filter.get_devices()
+
+    if len(valid_hid_devices) is 0:
+        return None
+    else:
+        return valid_hid_devices[0]
+
+
+def send_led_pattern(device, led1, led2, led3, led4):
+    # Report data for the demo is the report ID (always zero) followed by the
+    # LED on/off data
+    report_data = [0, led1, led2, led3, led4]
+
+    # Zero-extend the array to the length the report should be
+    report_data.extend([0] * (report_length - len(report_data)))
+
+    # Send the generated report to the device
+    device.send_output_report(report_data)
+
+    print("Sent LED Pattern: {0}".format(report_data[1:5]))
+
+
+def received_led_pattern(report_data):
+    print("Received LED Pattern: {0}".format(report_data[1:5]))
+
+
+def main():
+    hid_device = get_hid_device_handle()
+
+    if hid_device is None:
+        print("No valid HID device found.")
+        sys.exit(1)
+
+    try:
+        hid_device.open()
+
+        print("Connected to device 0x%04X/0x%04X - %s [%s]" %
+              (hid_device.vendor_id, hid_device.product_id,
+               hid_device.product_name, hid_device.vendor_name))
+
+        # Set up the HID input report handler to receive reports
+        hid_device.set_raw_data_handler(received_led_pattern)
+
+        p = 0
+        while (hid_device.is_plugged()):
+            # Convert the current pattern index to a bit-mask and send
+            send_led_pattern(hid_device,
+                             (p >> 3) & 1,
+                             (p >> 2) & 1,
+                             (p >> 1) & 1,
+                             (p >> 0) & 1)
+
+            # Compute next LED pattern in sequence
+            p = (p + 1) % 16
+
+            # Delay a bit for visual effect
+            sleep(.2)
+
+    finally:
+        hid_device.close()
+
+
+if __name__ == '__main__':
+    main()
diff --git a/lib/lufa/Demos/Device/ClassDriver/GenericHID/asf.xml b/lib/lufa/Demos/Device/ClassDriver/GenericHID/asf.xml
new file mode 100644
index 000000000..710f7c719
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/GenericHID/asf.xml
@@ -0,0 +1,63 @@
+<asf xmlversion="1.0">

+	<project caption="Generic HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.generic_hid.example.avr8">

+		<require idref="lufa.demos.device.class.generic_hid"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Generic HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.generic_hid.example.xmega">

+		<require idref="lufa.demos.device.class.generic_hid"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.generic_hid" caption="Generic HID Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Generic HID device demo, implementing a device whose LEDs can be controlled via HID messages from the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="HID Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="GenericHID.txt"/>

+		<build type="distribute" subtype="directory" value="HostTestApp"/>

+

+		<build type="c-source" value="GenericHID.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="GenericHID.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

+		<build type="header-file" value="Config/AppConfig.h"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/GenericHID/doxyfile b/lib/lufa/Demos/Device/ClassDriver/GenericHID/doxyfile
new file mode 100644
index 000000000..ffc0d0590
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/GenericHID/doxyfile
@@ -0,0 +1,2396 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Generic HID Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/ \
+                         HostTestApp/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/GenericHID/makefile b/lib/lufa/Demos/Device/ClassDriver/GenericHID/makefile
new file mode 100644
index 000000000..62fa2136a
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/GenericHID/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = GenericHID
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/Joystick/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/Joystick/Config/LUFAConfig.h
new file mode 100644
index 000000000..299d2ec85
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Joystick/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               1
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/Joystick/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/Joystick/Descriptors.c
new file mode 100644
index 000000000..4364cafa4
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Joystick/Descriptors.c
@@ -0,0 +1,220 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** HID class report descriptor. This is a special descriptor constructed with values from the
+ *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
+ *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
+ *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
+ *  more details on HID report descriptors.
+ */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM JoystickReport[] =
+{
+	/* Use the HID class driver's standard Joystick report.
+	 *   Min X/Y/Z Axis values: -100
+	 *   Max X/Y/Z Axis values:  100
+	 *   Min physical X/Y/Z Axis values (used to determine resolution): -1
+	 *   Max physical X/Y/Z Axis values (used to determine resolution):  1
+	 *   Buttons: 2
+	 */
+	HID_DESCRIPTOR_JOYSTICK(-100, 100, -1, 1, 2)
+};
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2043,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.HID_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_Joystick,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_NonBootSubclass,
+			.Protocol               = HID_CSCP_NonBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID_JoystickHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(JoystickReport)
+		},
+
+	.HID_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = JOYSTICK_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = JOYSTICK_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Joystick Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+		case HID_DTYPE_HID:
+			Address = &ConfigurationDescriptor.HID_JoystickHID;
+			Size    = sizeof(USB_HID_Descriptor_HID_t);
+			break;
+		case HID_DTYPE_Report:
+			Address = &JoystickReport;
+			Size    = sizeof(JoystickReport);
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Joystick/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/Joystick/Descriptors.h
new file mode 100644
index 000000000..9de556268
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Joystick/Descriptors.h
@@ -0,0 +1,93 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Joystick HID Interface
+			USB_Descriptor_Interface_t            HID_Interface;
+			USB_HID_Descriptor_HID_t              HID_JoystickHID;
+	        USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_Joystick = 0, /**< Joystick interface desciptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Macros: */
+		/** Endpoint address of the Joystick HID reporting IN endpoint. */
+		#define JOYSTICK_EPADDR              (ENDPOINT_DIR_IN | 1)
+
+		/** Size in bytes of the Joystick HID reporting IN endpoint. */
+		#define JOYSTICK_EPSIZE              8
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Joystick/Joystick.c b/lib/lufa/Demos/Device/ClassDriver/Joystick/Joystick.c
new file mode 100644
index 000000000..d1f40ec0d
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Joystick/Joystick.c
@@ -0,0 +1,202 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the Joystick demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "Joystick.h"
+
+/** Buffer to hold the previously generated HID report, for comparison purposes inside the HID class driver. */
+static uint8_t PrevJoystickHIDReportBuffer[sizeof(USB_JoystickReport_Data_t)];
+
+/** LUFA HID Class driver interface configuration and state information. This structure is
+ *  passed to all HID Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_HID_Device_t Joystick_HID_Interface =
+	{
+		.Config =
+			{
+				.InterfaceNumber              = INTERFACE_ID_Joystick,
+				.ReportINEndpoint             =
+					{
+						.Address              = JOYSTICK_EPADDR,
+						.Size                 = JOYSTICK_EPSIZE,
+						.Banks                = 1,
+					},
+				.PrevReportINBuffer           = PrevJoystickHIDReportBuffer,
+				.PrevReportINBufferSize       = sizeof(PrevJoystickHIDReportBuffer),
+			},
+	};
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		HID_Device_USBTask(&Joystick_HID_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	Buttons_Init();
+	USB_Init();
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Joystick_HID_Interface);
+
+	USB_Device_EnableSOFEvents();
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	HID_Device_ProcessControlRequest(&Joystick_HID_Interface);
+}
+
+/** Event handler for the USB device Start Of Frame event. */
+void EVENT_USB_Device_StartOfFrame(void)
+{
+	HID_Device_MillisecondElapsed(&Joystick_HID_Interface);
+}
+
+/** HID class driver callback function for the creation of HID reports to the host.
+ *
+ *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
+ *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
+ *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
+ *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
+ *
+ *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
+ */
+bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                         uint8_t* const ReportID,
+                                         const uint8_t ReportType,
+                                         void* ReportData,
+                                         uint16_t* const ReportSize)
+{
+	USB_JoystickReport_Data_t* JoystickReport = (USB_JoystickReport_Data_t*)ReportData;
+
+	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
+	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
+
+	if (JoyStatus_LCL & JOY_UP)
+	  JoystickReport->Y = -100;
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  JoystickReport->Y =  100;
+
+	if (JoyStatus_LCL & JOY_LEFT)
+	  JoystickReport->X = -100;
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  JoystickReport->X =  100;
+
+	if (JoyStatus_LCL & JOY_PRESS)
+	  JoystickReport->Button |= (1 << 1);
+
+	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
+	  JoystickReport->Button |= (1 << 0);
+
+	*ReportSize = sizeof(USB_JoystickReport_Data_t);
+	return false;
+}
+
+/** HID class driver callback function for the processing of HID reports from the host.
+ *
+ *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in] ReportID    Report ID of the received report from the host
+ *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
+ *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
+ *  \param[in] ReportSize  Size in bytes of the received HID report
+ */
+void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                          const uint8_t ReportID,
+                                          const uint8_t ReportType,
+                                          const void* ReportData,
+                                          const uint16_t ReportSize)
+{
+	// Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Joystick/Joystick.h b/lib/lufa/Demos/Device/ClassDriver/Joystick/Joystick.h
new file mode 100644
index 000000000..e6e61bc1b
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Joystick/Joystick.h
@@ -0,0 +1,100 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Joystick.c.
+ */
+
+#ifndef _JOYSTICK_H_
+#define _JOYSTICK_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Type Defines: */
+		/** Type define for the joystick HID report structure, for creating and sending HID reports to the host PC.
+		 *  This mirrors the layout described to the host in the HID report descriptor, in Descriptors.c.
+		 */
+		typedef struct
+		{
+			int8_t  X; /**< Current absolute joystick X position, as a signed 8-bit integer */
+			int8_t  Y; /**< Current absolute joystick Y position, as a signed 8-bit integer */
+			int8_t  Z; /**< Current absolute joystick Z position, as a signed 8-bit integer */
+			uint8_t Button; /**< Bit mask of the currently pressed joystick buttons */
+		} USB_JoystickReport_Data_t;
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+		void EVENT_USB_Device_StartOfFrame(void);
+
+		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                         uint8_t* const ReportID,
+		                                         const uint8_t ReportType,
+		                                         void* ReportData,
+		                                         uint16_t* const ReportSize);
+		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                          const uint8_t ReportID,
+		                                          const uint8_t ReportType,
+		                                          const void* ReportData,
+		                                          const uint16_t ReportSize);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Joystick/Joystick.txt b/lib/lufa/Demos/Device/ClassDriver/Joystick/Joystick.txt
new file mode 100644
index 000000000..b174642f4
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Joystick/Joystick.txt
@@ -0,0 +1,77 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Joystick Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Human Interface Device (HID)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>N/A</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Low Speed Mode \n
+ *        Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Joystick demonstration application. This gives a simple reference
+ *  application for implementing a USB Keyboard device, for USB Joysticks
+ *  using the standard Keyboard HID profile.
+ *
+ *  This device will show up as a generic joystick device, with two buttons.
+ *  Pressing the joystick inwards is the first button, and the HWB button
+ *  is the second.
+ *
+ *  Moving the joystick on the selected board moves the joystick location on
+ *  the host computer.
+ *
+ *  Currently only single interface joysticks are supported.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Joystick/asf.xml b/lib/lufa/Demos/Device/ClassDriver/Joystick/asf.xml
new file mode 100644
index 000000000..97d37a5aa
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Joystick/asf.xml
@@ -0,0 +1,62 @@
+<asf xmlversion="1.0">

+	<project caption="Joystick HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.joystick.example.avr8">

+		<require idref="lufa.demos.device.class.joystick"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Joystick HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.joystick.example.xmega">

+		<require idref="lufa.demos.device.class.joystick"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.joystick" caption="Joystick HID Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Joystick HID device demo, implementing a basic USB joystick that can send movement information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="HID Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="Joystick.txt"/>

+

+		<build type="c-source" value="Joystick.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="Joystick.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.buttons"/>

+		<require idref="lufa.drivers.board.joystick"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/Joystick/doxyfile b/lib/lufa/Demos/Device/ClassDriver/Joystick/doxyfile
new file mode 100644
index 000000000..45ebd1341
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Joystick/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Joystick Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/Joystick/makefile b/lib/lufa/Demos/Device/ClassDriver/Joystick/makefile
new file mode 100644
index 000000000..b6f6e2e2a
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Joystick/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = Joystick
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/Keyboard/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/Keyboard/Config/LUFAConfig.h
new file mode 100644
index 000000000..299d2ec85
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Keyboard/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               1
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/Keyboard/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/Keyboard/Descriptors.c
new file mode 100644
index 000000000..4a1e1297b
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Keyboard/Descriptors.c
@@ -0,0 +1,216 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** HID class report descriptor. This is a special descriptor constructed with values from the
+ *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
+ *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
+ *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
+ *  more details on HID report descriptors.
+ */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
+{
+	/* Use the HID class driver's standard Keyboard report.
+	 *   Max simultaneous keys: 6
+	 */
+	HID_DESCRIPTOR_KEYBOARD(6)
+};
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2042,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.HID_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_Keyboard,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_BootSubclass,
+			.Protocol               = HID_CSCP_KeyboardBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID_KeyboardHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(KeyboardReport)
+		},
+
+	.HID_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = KEYBOARD_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = KEYBOARD_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Keyboard Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+		case HID_DTYPE_HID:
+			Address = &ConfigurationDescriptor.HID_KeyboardHID;
+			Size    = sizeof(USB_HID_Descriptor_HID_t);
+			break;
+		case HID_DTYPE_Report:
+			Address = &KeyboardReport;
+			Size    = sizeof(KeyboardReport);
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Keyboard/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/Keyboard/Descriptors.h
new file mode 100644
index 000000000..3e6a021da
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Keyboard/Descriptors.h
@@ -0,0 +1,93 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Keyboard HID Interface
+			USB_Descriptor_Interface_t            HID_Interface;
+			USB_HID_Descriptor_HID_t              HID_KeyboardHID;
+			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_Keyboard = 0, /**< Keyboard interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Macros: */
+		/** Endpoint address of the Keyboard HID reporting IN endpoint. */
+		#define KEYBOARD_EPADDR              (ENDPOINT_DIR_IN | 1)
+
+		/** Size in bytes of the Keyboard HID reporting IN endpoint. */
+		#define KEYBOARD_EPSIZE              8
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Keyboard/Keyboard.c b/lib/lufa/Demos/Device/ClassDriver/Keyboard/Keyboard.c
new file mode 100644
index 000000000..99799f6d5
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Keyboard/Keyboard.c
@@ -0,0 +1,219 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the Keyboard demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "Keyboard.h"
+
+/** Buffer to hold the previously generated Keyboard HID report, for comparison purposes inside the HID class driver. */
+static uint8_t PrevKeyboardHIDReportBuffer[sizeof(USB_KeyboardReport_Data_t)];
+
+/** LUFA HID Class driver interface configuration and state information. This structure is
+ *  passed to all HID Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_HID_Device_t Keyboard_HID_Interface =
+	{
+		.Config =
+			{
+				.InterfaceNumber              = INTERFACE_ID_Keyboard,
+				.ReportINEndpoint             =
+					{
+						.Address              = KEYBOARD_EPADDR,
+						.Size                 = KEYBOARD_EPSIZE,
+						.Banks                = 1,
+					},
+				.PrevReportINBuffer           = PrevKeyboardHIDReportBuffer,
+				.PrevReportINBufferSize       = sizeof(PrevKeyboardHIDReportBuffer),
+			},
+	};
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		HID_Device_USBTask(&Keyboard_HID_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware()
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	Buttons_Init();
+	USB_Init();
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Keyboard_HID_Interface);
+
+	USB_Device_EnableSOFEvents();
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	HID_Device_ProcessControlRequest(&Keyboard_HID_Interface);
+}
+
+/** Event handler for the USB device Start Of Frame event. */
+void EVENT_USB_Device_StartOfFrame(void)
+{
+	HID_Device_MillisecondElapsed(&Keyboard_HID_Interface);
+}
+
+/** HID class driver callback function for the creation of HID reports to the host.
+ *
+ *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
+ *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
+ *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
+ *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
+ *
+ *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
+ */
+bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                         uint8_t* const ReportID,
+                                         const uint8_t ReportType,
+                                         void* ReportData,
+                                         uint16_t* const ReportSize)
+{
+	USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData;
+
+	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
+	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
+
+	uint8_t UsedKeyCodes = 0;
+
+	if (JoyStatus_LCL & JOY_UP)
+	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_A;
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_B;
+
+	if (JoyStatus_LCL & JOY_LEFT)
+	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_C;
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_D;
+
+	if (JoyStatus_LCL & JOY_PRESS)
+	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_E;
+
+	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
+	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_F;
+
+	if (UsedKeyCodes)
+	  KeyboardReport->Modifier = HID_KEYBOARD_MODIFIER_LEFTSHIFT;
+
+	*ReportSize = sizeof(USB_KeyboardReport_Data_t);
+	return false;
+}
+
+/** HID class driver callback function for the processing of HID reports from the host.
+ *
+ *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in] ReportID    Report ID of the received report from the host
+ *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
+ *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
+ *  \param[in] ReportSize  Size in bytes of the received HID report
+ */
+void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                          const uint8_t ReportID,
+                                          const uint8_t ReportType,
+                                          const void* ReportData,
+                                          const uint16_t ReportSize)
+{
+	uint8_t  LEDMask   = LEDS_NO_LEDS;
+	uint8_t* LEDReport = (uint8_t*)ReportData;
+
+	if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK)
+	  LEDMask |= LEDS_LED1;
+
+	if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK)
+	  LEDMask |= LEDS_LED3;
+
+	if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK)
+	  LEDMask |= LEDS_LED4;
+
+	LEDs_SetAllLEDs(LEDMask);
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Keyboard/Keyboard.h b/lib/lufa/Demos/Device/ClassDriver/Keyboard/Keyboard.h
new file mode 100644
index 000000000..45d742330
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Keyboard/Keyboard.h
@@ -0,0 +1,89 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Keyboard.c.
+ */
+
+#ifndef _KEYBOARD_H_
+#define _KEYBOARD_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdbool.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+		void EVENT_USB_Device_StartOfFrame(void);
+
+		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                         uint8_t* const ReportID,
+		                                         const uint8_t ReportType,
+		                                         void* ReportData,
+		                                         uint16_t* const ReportSize);
+		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                          const uint8_t ReportID,
+		                                          const uint8_t ReportType,
+		                                          const void* ReportData,
+		                                          const uint16_t ReportSize);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Keyboard/Keyboard.txt b/lib/lufa/Demos/Device/ClassDriver/Keyboard/Keyboard.txt
new file mode 100644
index 000000000..3813745c8
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Keyboard/Keyboard.txt
@@ -0,0 +1,76 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Keyboard Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Human Interface Device (HID)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Keyboard Subclass</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Low Speed Mode \n
+ *        Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Keyboard demonstration application. This gives a simple reference application
+ *  for implementing a USB Keyboard using the basic USB HID drivers in all modern
+ *  OSes (i.e. no special drivers required). It is boot protocol compatible, and thus
+ *  works under compatible BIOS as if it was a native keyboard (e.g. PS/2).
+ *
+ *  On start-up the system will automatically enumerate and function as a keyboard
+ *  when the USB connection to a host is present. To use the keyboard example,
+ *  manipulate the joystick to send the letters a, b, c, d and e. See the USB HID
+ *  documentation for more information on sending keyboard event and key presses. Unlike
+ *  other LUFA Keyboard demos, this example shows explicitly how to send multiple key presses
+ *  inside the same report to the host.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Keyboard/asf.xml b/lib/lufa/Demos/Device/ClassDriver/Keyboard/asf.xml
new file mode 100644
index 000000000..d7cdc17bc
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Keyboard/asf.xml
@@ -0,0 +1,62 @@
+<asf xmlversion="1.0">

+	<project caption="Keyboard HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard.example.avr8">

+		<require idref="lufa.demos.device.class.keyboard"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Keyboard HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard.example.xmega">

+		<require idref="lufa.demos.device.class.keyboard"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.keyboard" caption="Keyboard HID Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Keyboard HID device demo, implementing a basic USB keyboard that can send key press information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="HID Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="Keyboard.txt"/>

+

+		<build type="c-source" value="Keyboard.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="Keyboard.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.joystick"/>

+		<require idref="lufa.drivers.board.buttons"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/Keyboard/doxyfile b/lib/lufa/Demos/Device/ClassDriver/Keyboard/doxyfile
new file mode 100644
index 000000000..e39731937
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Keyboard/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Keyboard Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/Keyboard/makefile b/lib/lufa/Demos/Device/ClassDriver/Keyboard/makefile
new file mode 100644
index 000000000..a02c41c64
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Keyboard/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = Keyboard
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/Config/LUFAConfig.h
new file mode 100644
index 000000000..cc828a108
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               3
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c
new file mode 100644
index 000000000..7a810ca5e
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c
@@ -0,0 +1,289 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** HID class report descriptor. This is a special descriptor constructed with values from the
+ *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
+ *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
+ *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
+ *  more details on HID report descriptors.
+ *
+ *  This descriptor describes the mouse HID interface's report structure.
+ */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
+{
+	/* Use the HID class driver's standard Mouse report.
+	 *   Min X/Y Axis values: -1
+	 *   Max X/Y Axis values:  1
+	 *   Min physical X/Y Axis values (used to determine resolution): -1
+	 *   Max physical X/Y Axis values (used to determine resolution):  1
+	 *   Buttons: 3
+	 *   Absolute screen coordinates: false
+	 */
+	HID_DESCRIPTOR_MOUSE(-1, 1, -1, 1, 3, false)
+};
+
+/** Same as the MouseReport structure, but defines the keyboard HID interface's report structure. */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
+{
+	/* Use the HID class driver's standard Keyboard report.
+	 *   Max simultaneous keys: 6
+	 */
+	HID_DESCRIPTOR_KEYBOARD(6)
+};
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x204D,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 2,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.HID1_KeyboardInterface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_Keyboard,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_BootSubclass,
+			.Protocol               = HID_CSCP_KeyboardBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID1_KeyboardHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(KeyboardReport)
+		},
+
+	.HID1_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = KEYBOARD_IN_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = HID_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.HID2_MouseInterface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_Mouse,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_BootSubclass,
+			.Protocol               = HID_CSCP_MouseBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID2_MouseHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(MouseReport)
+		},
+
+	.HID2_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = MOUSE_IN_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = HID_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mouse and Keyboard Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+		case HID_DTYPE_HID:
+			switch (wIndex)
+			{
+				case INTERFACE_ID_Keyboard:
+					Address = &ConfigurationDescriptor.HID1_KeyboardHID;
+					Size    = sizeof(USB_HID_Descriptor_HID_t);
+					break;
+				case INTERFACE_ID_Mouse:
+					Address = &ConfigurationDescriptor.HID2_MouseHID;
+					Size    = sizeof(USB_HID_Descriptor_HID_t);
+					break;
+			}
+
+			break;
+		case HID_DTYPE_Report:
+			switch (wIndex)
+			{
+				case INTERFACE_ID_Keyboard:
+					Address = &KeyboardReport;
+					Size    = sizeof(KeyboardReport);
+					break;
+				case INTERFACE_ID_Mouse:
+					Address = &MouseReport;
+					Size    = sizeof(MouseReport);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h
new file mode 100644
index 000000000..1baaa3c02
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h
@@ -0,0 +1,102 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Keyboard HID Interface
+			USB_Descriptor_Interface_t            HID1_KeyboardInterface;
+			USB_HID_Descriptor_HID_t              HID1_KeyboardHID;
+			USB_Descriptor_Endpoint_t             HID1_ReportINEndpoint;
+
+			// Mouse HID Interface
+			USB_Descriptor_Interface_t            HID2_MouseInterface;
+			USB_HID_Descriptor_HID_t              HID2_MouseHID;
+			USB_Descriptor_Endpoint_t             HID2_ReportINEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_Keyboard = 0, /**< Keyboard interface descriptor ID */
+			INTERFACE_ID_Mouse    = 1, /**< Mouse interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Macros: */
+		/** Endpoint address of the Keyboard HID reporting IN endpoint. */
+		#define KEYBOARD_IN_EPADDR        (ENDPOINT_DIR_IN | 1)
+
+		/** Endpoint address of the Mouse HID reporting IN endpoint. */
+		#define MOUSE_IN_EPADDR           (ENDPOINT_DIR_IN | 3)
+
+		/** Size in bytes of each of the HID reporting IN endpoints. */
+		#define HID_EPSIZE                8
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c
new file mode 100644
index 000000000..4405fe745
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c
@@ -0,0 +1,276 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the KeyboardMouse demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "KeyboardMouse.h"
+
+/** Buffer to hold the previously generated Keyboard HID report, for comparison purposes inside the HID class driver. */
+static uint8_t PrevKeyboardHIDReportBuffer[sizeof(USB_KeyboardReport_Data_t)];
+
+/** Buffer to hold the previously generated Mouse HID report, for comparison purposes inside the HID class driver. */
+static uint8_t PrevMouseHIDReportBuffer[sizeof(USB_MouseReport_Data_t)];
+
+/** LUFA HID Class driver interface configuration and state information. This structure is
+ *  passed to all HID Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another. This is for the keyboard HID
+ *  interface within the device.
+ */
+USB_ClassInfo_HID_Device_t Keyboard_HID_Interface =
+	{
+		.Config =
+			{
+				.InterfaceNumber              = INTERFACE_ID_Keyboard,
+				.ReportINEndpoint             =
+					{
+						.Address              = KEYBOARD_IN_EPADDR,
+						.Size                 = HID_EPSIZE,
+						.Banks                = 1,
+					},
+				.PrevReportINBuffer           = PrevKeyboardHIDReportBuffer,
+				.PrevReportINBufferSize       = sizeof(PrevKeyboardHIDReportBuffer),
+			},
+	};
+
+/** LUFA HID Class driver interface configuration and state information. This structure is
+ *  passed to all HID Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another. This is for the mouse HID
+ *  interface within the device.
+ */
+USB_ClassInfo_HID_Device_t Mouse_HID_Interface =
+	{
+		.Config =
+			{
+				.InterfaceNumber              = INTERFACE_ID_Mouse,
+				.ReportINEndpoint             =
+					{
+						.Address              = MOUSE_IN_EPADDR,
+						.Size                 = HID_EPSIZE,
+						.Banks                = 1,
+					},
+				.PrevReportINBuffer           = PrevMouseHIDReportBuffer,
+				.PrevReportINBufferSize       = sizeof(PrevMouseHIDReportBuffer),
+			},
+	};
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		HID_Device_USBTask(&Keyboard_HID_Interface);
+		HID_Device_USBTask(&Mouse_HID_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware()
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+    LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+    LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Keyboard_HID_Interface);
+	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Mouse_HID_Interface);
+
+	USB_Device_EnableSOFEvents();
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	HID_Device_ProcessControlRequest(&Keyboard_HID_Interface);
+	HID_Device_ProcessControlRequest(&Mouse_HID_Interface);
+}
+
+/** Event handler for the USB device Start Of Frame event. */
+void EVENT_USB_Device_StartOfFrame(void)
+{
+	HID_Device_MillisecondElapsed(&Keyboard_HID_Interface);
+	HID_Device_MillisecondElapsed(&Mouse_HID_Interface);
+}
+
+/** HID class driver callback function for the creation of HID reports to the host.
+ *
+ *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
+ *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
+ *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
+ *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
+ *
+ *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
+ */
+bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                         uint8_t* const ReportID,
+                                         const uint8_t ReportType,
+                                         void* ReportData,
+                                         uint16_t* const ReportSize)
+{
+	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
+	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
+
+	/* Determine which interface must have its report generated */
+	if (HIDInterfaceInfo == &Keyboard_HID_Interface)
+	{
+		USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData;
+
+		/* If first board button not being held down, no keyboard report */
+		if (!(ButtonStatus_LCL & BUTTONS_BUTTON1))
+		  return 0;
+
+		KeyboardReport->Modifier = HID_KEYBOARD_MODIFIER_LEFTSHIFT;
+
+		if (JoyStatus_LCL & JOY_UP)
+		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_A;
+		else if (JoyStatus_LCL & JOY_DOWN)
+		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_B;
+
+		if (JoyStatus_LCL & JOY_LEFT)
+		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_C;
+		else if (JoyStatus_LCL & JOY_RIGHT)
+		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_D;
+
+		if (JoyStatus_LCL & JOY_PRESS)
+		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_E;
+
+		*ReportSize = sizeof(USB_KeyboardReport_Data_t);
+		return false;
+	}
+	else
+	{
+		USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData;
+
+		/* If first board button being held down, no mouse report */
+		if (ButtonStatus_LCL & BUTTONS_BUTTON1)
+		  return 0;
+
+		if (JoyStatus_LCL & JOY_UP)
+		  MouseReport->Y = -1;
+		else if (JoyStatus_LCL & JOY_DOWN)
+		  MouseReport->Y =  1;
+
+		if (JoyStatus_LCL & JOY_LEFT)
+		  MouseReport->X = -1;
+		else if (JoyStatus_LCL & JOY_RIGHT)
+		  MouseReport->X =  1;
+
+		if (JoyStatus_LCL & JOY_PRESS)
+		  MouseReport->Button |= (1 << 0);
+
+		*ReportSize = sizeof(USB_MouseReport_Data_t);
+		return true;
+	}
+}
+
+/** HID class driver callback function for the processing of HID reports from the host.
+ *
+ *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in] ReportID    Report ID of the received report from the host
+ *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
+ *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
+ *  \param[in] ReportSize  Size in bytes of the received HID report
+ */
+void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                          const uint8_t ReportID,
+                                          const uint8_t ReportType,
+                                          const void* ReportData,
+                                          const uint16_t ReportSize)
+{
+	if (HIDInterfaceInfo == &Keyboard_HID_Interface)
+	{
+		uint8_t  LEDMask   = LEDS_NO_LEDS;
+		uint8_t* LEDReport = (uint8_t*)ReportData;
+
+		if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK)
+		  LEDMask |= LEDS_LED1;
+
+		if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK)
+		  LEDMask |= LEDS_LED3;
+
+		if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK)
+		  LEDMask |= LEDS_LED4;
+
+		LEDs_SetAllLEDs(LEDMask);
+	}
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h
new file mode 100644
index 000000000..dba805d6a
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h
@@ -0,0 +1,84 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+#ifndef _KEYBOARD_MOUSE_H_
+#define _KEYBOARD_MOUSE_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdbool.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+		void EVENT_USB_Device_StartOfFrame(void);
+
+		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                         uint8_t* const ReportID,
+		                                         const uint8_t ReportType,
+		                                         void* ReportData,
+		                                         uint16_t* const ReportSize);
+		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                          const uint8_t ReportID,
+		                                          const uint8_t ReportType,
+		                                          const void* ReportData,
+		                                          const uint16_t ReportSize);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt
new file mode 100644
index 000000000..262a84f0e
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt
@@ -0,0 +1,81 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Dual HID Keyboard and Mouse Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Human Interface Device (HID)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>N/A</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Low Speed Mode \n
+ *        Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Keyboard/Mouse demonstration application. This gives a simple reference
+ *  application for implementing a composite device containing both USB Keyboard
+ *  and USB Mouse functionality using the basic USB HID drivers in all modern OSes
+ *  (i.e. no special drivers required). This example uses two separate HID
+ *  interfaces for each function. It is boot protocol compatible, and thus works under
+ *  compatible BIOS as if it was a native keyboard and mouse (e.g. PS/2).
+ *
+ *  On start-up the system will automatically enumerate and function
+ *  as a keyboard when the USB connection to a host is present and the HWB is not
+ *  pressed. When enabled, manipulate the joystick to send the letters
+ *  a, b, c, d and e. See the USB HID documentation for more information
+ *  on sending keyboard event and key presses.
+ *
+ *  When the HWB is pressed, the mouse mode is enabled. When enabled, move the
+ *  joystick to move the pointer, and push the joystick inwards to simulate a
+ *  left-button click.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/asf.xml b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/asf.xml
new file mode 100644
index 000000000..4b5ca0121
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/asf.xml
@@ -0,0 +1,62 @@
+<asf xmlversion="1.0">

+	<project caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse.example.avr8">

+		<require idref="lufa.demos.device.class.keyboard_mouse"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse.example.xmega">

+		<require idref="lufa.demos.device.class.keyboard_mouse"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.keyboard_mouse" caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a pair of HID interfaces. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="HID Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="KeyboardMouse.txt"/>

+

+		<build type="c-source" value="KeyboardMouse.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="KeyboardMouse.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.joystick"/>

+		<require idref="lufa.drivers.board.buttons"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/doxyfile b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/doxyfile
new file mode 100644
index 000000000..6648a78d1
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Combined Keyboard/Mouse Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/makefile b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/makefile
new file mode 100644
index 000000000..e4eddb736
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = KeyboardMouse
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Config/LUFAConfig.h
new file mode 100644
index 000000000..299d2ec85
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               1
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c
new file mode 100644
index 000000000..af1d5380b
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c
@@ -0,0 +1,279 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** HID class report descriptor. This is a special descriptor constructed with values from the
+ *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
+ *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
+ *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
+ *  more details on HID report descriptors.
+ *
+ *  This descriptor describes the multiple possible reports of the HID interface's report structure.
+ */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM HIDReport[] =
+{
+	/* Mouse Report */
+	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+	HID_RI_USAGE(8, 0x02), /* Mouse */
+	HID_RI_COLLECTION(8, 0x01), /* Application */
+		HID_RI_REPORT_ID(8, HID_REPORTID_MouseReport),
+		HID_RI_USAGE(8, 0x01), /* Pointer */
+		HID_RI_COLLECTION(8, 0x00), /* Physical */
+			HID_RI_USAGE_PAGE(8, 0x09), /* Button */
+			HID_RI_USAGE_MINIMUM(8, 0x01),
+			HID_RI_USAGE_MAXIMUM(8, 0x03),
+			HID_RI_LOGICAL_MINIMUM(8, 0x00),
+			HID_RI_LOGICAL_MAXIMUM(8, 0x01),
+			HID_RI_REPORT_COUNT(8, 0x03),
+			HID_RI_REPORT_SIZE(8, 0x01),
+			HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+			HID_RI_REPORT_COUNT(8, 0x01),
+			HID_RI_REPORT_SIZE(8, 0x05),
+			HID_RI_INPUT(8, HID_IOF_CONSTANT),
+			HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+			HID_RI_USAGE(8, 0x30), /* Usage X */
+			HID_RI_USAGE(8, 0x31), /* Usage Y */
+			HID_RI_LOGICAL_MINIMUM(8, -1),
+			HID_RI_LOGICAL_MAXIMUM(8, 1),
+			HID_RI_PHYSICAL_MINIMUM(8, -1),
+			HID_RI_PHYSICAL_MAXIMUM(8, 1),
+			HID_RI_REPORT_COUNT(8, 0x02),
+			HID_RI_REPORT_SIZE(8, 0x08),
+			HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
+		HID_RI_END_COLLECTION(0),
+	HID_RI_END_COLLECTION(0),
+
+	/* Keyboard Report */
+	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+	HID_RI_USAGE(8, 0x06), /* Keyboard */
+	HID_RI_COLLECTION(8, 0x01), /* Application */
+		HID_RI_REPORT_ID(8, HID_REPORTID_KeyboardReport),
+		HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */
+		HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */
+		HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */
+		HID_RI_LOGICAL_MINIMUM(8, 0x00),
+		HID_RI_LOGICAL_MAXIMUM(8, 0x01),
+		HID_RI_REPORT_SIZE(8, 0x01),
+		HID_RI_REPORT_COUNT(8, 0x08),
+		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+		HID_RI_REPORT_COUNT(8, 0x01),
+		HID_RI_REPORT_SIZE(8, 0x08),
+		HID_RI_INPUT(8, HID_IOF_CONSTANT),
+		HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */
+		HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */
+		HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */
+		HID_RI_REPORT_COUNT(8, 0x05),
+		HID_RI_REPORT_SIZE(8, 0x01),
+		HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
+		HID_RI_REPORT_COUNT(8, 0x01),
+		HID_RI_REPORT_SIZE(8, 0x03),
+		HID_RI_OUTPUT(8, HID_IOF_CONSTANT),
+		HID_RI_LOGICAL_MINIMUM(8, 0x00),
+		HID_RI_LOGICAL_MAXIMUM(8, 0x65),
+		HID_RI_USAGE_PAGE(8, 0x07), /* Keyboard */
+		HID_RI_USAGE_MINIMUM(8, 0x00), /* Reserved (no event indicated) */
+		HID_RI_USAGE_MAXIMUM(8, 0x65), /* Keyboard Application */
+		HID_RI_REPORT_COUNT(8, 0x06),
+		HID_RI_REPORT_SIZE(8, 0x08),
+		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
+	HID_RI_END_COLLECTION(0),
+};
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2066,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.HID_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_KeyboardAndMouse,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_NonBootSubclass,
+			.Protocol               = HID_CSCP_NonBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID_HIDData =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(HIDReport)
+		},
+
+	.HID_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = HID_IN_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = HID_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Multi HID Report Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+		case HID_DTYPE_HID:
+			Address = &ConfigurationDescriptor.HID_HIDData;
+			Size    = sizeof(USB_HID_Descriptor_HID_t);
+			break;
+		case HID_DTYPE_Report:
+			Address = &HIDReport;
+			Size    = sizeof(HIDReport);
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h
new file mode 100644
index 000000000..aaaf550c8
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h
@@ -0,0 +1,101 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Combined Keyboard/Mouse HID Interface
+			USB_Descriptor_Interface_t            HID_Interface;
+			USB_HID_Descriptor_HID_t              HID_HIDData;
+			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_KeyboardAndMouse = 0, /**< Combined keyboard and mouse interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Macros: */
+		/** Endpoint address of the HID reporting IN endpoint. */
+		#define HID_IN_EPADDR             (ENDPOINT_DIR_IN | 1)
+
+		/** Size in bytes of each of the HID reporting IN endpoint. */
+		#define HID_EPSIZE                8
+
+	/* Enums: */
+		/** Enum for the HID report IDs used in the device. */
+		enum
+		{
+			HID_REPORTID_MouseReport    = 0x01, /**< Report ID for the Mouse report within the device. */
+			HID_REPORTID_KeyboardReport = 0x02, /**< Report ID for the Keyboard report within the device. */
+		} HID_Report_IDs;
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c
new file mode 100644
index 000000000..c49124974
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c
@@ -0,0 +1,237 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the KeyboardMouseMultiReport demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "KeyboardMouseMultiReport.h"
+
+/** Buffer to hold the previously generated HID report, for comparison purposes inside the HID class driver. */
+static uint8_t PrevHIDReportBuffer[MAX(sizeof(USB_KeyboardReport_Data_t), sizeof(USB_MouseReport_Data_t))];
+
+/** LUFA HID Class driver interface configuration and state information. This structure is
+ *  passed to all HID Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_HID_Device_t Device_HID_Interface =
+	{
+		.Config =
+			{
+				.InterfaceNumber              = INTERFACE_ID_KeyboardAndMouse,
+				.ReportINEndpoint             =
+					{
+						.Address              = HID_IN_EPADDR,
+						.Size                 = HID_EPSIZE,
+						.Banks                = 1,
+					},
+				.PrevReportINBuffer           = PrevHIDReportBuffer,
+				.PrevReportINBufferSize       = sizeof(PrevHIDReportBuffer),
+			},
+	};
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		HID_Device_USBTask(&Device_HID_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware()
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Device_HID_Interface);
+
+	USB_Device_EnableSOFEvents();
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	HID_Device_ProcessControlRequest(&Device_HID_Interface);
+}
+
+/** Event handler for the USB device Start Of Frame event. */
+void EVENT_USB_Device_StartOfFrame(void)
+{
+	HID_Device_MillisecondElapsed(&Device_HID_Interface);
+}
+
+/** HID class driver callback function for the creation of HID reports to the host.
+ *
+ *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
+ *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
+ *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
+ *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
+ *
+ *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
+ */
+bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                         uint8_t* const ReportID,
+                                         const uint8_t ReportType,
+                                         void* ReportData,
+                                         uint16_t* const ReportSize)
+{
+	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
+	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
+
+	if (!(ButtonStatus_LCL & BUTTONS_BUTTON1))
+	{
+		USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData;
+
+		KeyboardReport->Modifier = HID_KEYBOARD_MODIFIER_LEFTSHIFT;
+
+		if (JoyStatus_LCL & JOY_UP)
+		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_A;
+		else if (JoyStatus_LCL & JOY_DOWN)
+		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_B;
+
+		if (JoyStatus_LCL & JOY_LEFT)
+		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_C;
+		else if (JoyStatus_LCL & JOY_RIGHT)
+		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_D;
+
+		if (JoyStatus_LCL & JOY_PRESS)
+		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_E;
+
+		*ReportID   = HID_REPORTID_KeyboardReport;
+		*ReportSize = sizeof(USB_KeyboardReport_Data_t);
+		return false;
+	}
+	else
+	{
+		USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData;
+
+		if (JoyStatus_LCL & JOY_UP)
+		  MouseReport->Y = -1;
+		else if (JoyStatus_LCL & JOY_DOWN)
+		  MouseReport->Y =  1;
+
+		if (JoyStatus_LCL & JOY_LEFT)
+		  MouseReport->X = -1;
+		else if (JoyStatus_LCL & JOY_RIGHT)
+		  MouseReport->X =  1;
+
+		if (JoyStatus_LCL & JOY_PRESS)
+		  MouseReport->Button |= (1 << 0);
+
+		*ReportID   = HID_REPORTID_MouseReport;
+		*ReportSize = sizeof(USB_MouseReport_Data_t);
+		return true;
+	}
+}
+
+/** HID class driver callback function for the processing of HID reports from the host.
+ *
+ *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in] ReportID    Report ID of the received report from the host
+ *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
+ *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
+ *  \param[in] ReportSize  Size in bytes of the received HID report
+ */
+void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                          const uint8_t ReportID,
+                                          const uint8_t ReportType,
+                                          const void* ReportData,
+                                          const uint16_t ReportSize)
+{
+	uint8_t  LEDMask   = LEDS_NO_LEDS;
+	uint8_t* LEDReport = (uint8_t*)ReportData;
+
+	if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK)
+	  LEDMask |= LEDS_LED1;
+
+	if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK)
+	  LEDMask |= LEDS_LED3;
+
+	if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK)
+	  LEDMask |= LEDS_LED4;
+
+	LEDs_SetAllLEDs(LEDMask);
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.h b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.h
new file mode 100644
index 000000000..dba805d6a
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.h
@@ -0,0 +1,84 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+#ifndef _KEYBOARD_MOUSE_H_
+#define _KEYBOARD_MOUSE_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdbool.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+		void EVENT_USB_Device_StartOfFrame(void);
+
+		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                         uint8_t* const ReportID,
+		                                         const uint8_t ReportType,
+		                                         void* ReportData,
+		                                         uint16_t* const ReportSize);
+		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                          const uint8_t ReportID,
+		                                          const uint8_t ReportType,
+		                                          const void* ReportData,
+		                                          const uint16_t ReportSize);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt
new file mode 100644
index 000000000..ed55f595a
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt
@@ -0,0 +1,78 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Multiple Report HID Keyboard and Mouse Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Human Interface Device (HID)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>N/A</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Low Speed Mode \n
+ *        Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Keyboard/Mouse demonstration application, using a single HID interface. This gives
+ *  a simple reference application for implementing a multiple HID report device
+ *  containing both USB Keyboard and USB Mouse functionality using the basic USB HID
+ *  drivers in all modern OSes (i.e. no special drivers required). This example uses a
+ *  single HID interface that is shared between the two functions.
+ *
+ *  On start-up the system will automatically enumerate and function as a keyboard when
+ *  the USB connection to a host is present and the HWB is not pressed. When enabled,
+ *  manipulate the joystick to send the letters a, b, c, d and e. See the USB HID
+ *  documentation for more information on sending keyboard event and key presses.
+ *
+ *  When the HWB is pressed, the mouse mode is enabled. When enabled, move the joystick
+ *  to move the pointer, and push the joystick inwards to simulate a left-button click.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/asf.xml b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/asf.xml
new file mode 100644
index 000000000..39487fd8a
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/asf.xml
@@ -0,0 +1,61 @@
+<asf xmlversion="1.0">

+	<project caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse_mr.example.avr8">

+		<require idref="lufa.demos.device.class.keyboard_mouse_mr"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse_mr.example.xmega">

+		<require idref="lufa.demos.device.class.keyboard_mouse_mr"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.keyboard_mouse_mr" caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a single HID interface and multiple logical reports. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="HID Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="KeyboardMouseMultiReport.txt"/>

+

+		<build type="c-source" value="KeyboardMouseMultiReport.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="KeyboardMouseMultiReport.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.joystick"/>

+		<require idref="lufa.drivers.board.buttons"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/doxyfile b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/doxyfile
new file mode 100644
index 000000000..6ea750cfc
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Combined Keyboard/Mouse (Multiple HID Report) Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile
new file mode 100644
index 000000000..22957f87d
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = KeyboardMouseMultiReport
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/MIDI/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/MIDI/Config/LUFAConfig.h
new file mode 100644
index 000000000..00eefc7bf
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MIDI/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               2
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/MIDI/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/MIDI/Descriptors.c
new file mode 100644
index 000000000..b4bcea1ee
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MIDI/Descriptors.c
@@ -0,0 +1,314 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2048,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces          = 2,
+
+			.ConfigurationNumber      = 1,
+			.ConfigurationStrIndex    = NO_DESCRIPTOR,
+
+			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
+		},
+
+	.Audio_ControlInterface =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioControl,
+			.AlternateSetting         = 0,
+
+			.TotalEndpoints           = 0,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_ControlSubclass,
+			.Protocol                 = AUDIO_CSCP_ControlProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_ControlInterface_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
+
+			.ACSpecification          = VERSION_BCD(1,0,0),
+			.TotalLength              = sizeof(USB_Audio_Descriptor_Interface_AC_t),
+
+			.InCollection             = 1,
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+		},
+
+	.Audio_StreamInterface =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+			.AlternateSetting         = 0,
+
+			.TotalEndpoints           = 2,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_MIDIStreamingSubclass,
+			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_AudioInterface_AS_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
+
+			.AudioSpecification       = VERSION_BCD(1,0,0),
+
+			.TotalLength              = (sizeof(USB_Descriptor_Configuration_t) -
+			                             offsetof(USB_Descriptor_Configuration_t, Audio_StreamInterface_SPC))
+		},
+
+	.MIDI_In_Jack_Emb =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_Embedded,
+			.JackID                   = 0x01,
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_In_Jack_Ext =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_External,
+			.JackID                   = 0x02,
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_Out_Jack_Emb =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_Embedded,
+			.JackID                   = 0x03,
+
+			.NumberOfPins             = 1,
+			.SourceJackID             = {0x02},
+			.SourcePinID              = {0x01},
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_Out_Jack_Ext =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_External,
+			.JackID                   = 0x04,
+
+			.NumberOfPins             = 1,
+			.SourceJackID             = {0x01},
+			.SourcePinID              = {0x01},
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_In_Jack_Endpoint =
+		{
+			.Endpoint =
+				{
+					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
+
+					.EndpointAddress     = MIDI_STREAM_OUT_EPADDR,
+					.Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+					.EndpointSize        = MIDI_STREAM_EPSIZE,
+					.PollingIntervalMS   = 0x05
+				},
+
+			.Refresh                  = 0,
+			.SyncEndpointNumber       = 0
+		},
+
+	.MIDI_In_Jack_Endpoint_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint},
+			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
+
+			.TotalEmbeddedJacks       = 0x01,
+			.AssociatedJackID         = {0x01}
+		},
+
+	.MIDI_Out_Jack_Endpoint =
+		{
+			.Endpoint =
+				{
+					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
+
+					.EndpointAddress     = MIDI_STREAM_IN_EPADDR,
+					.Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+					.EndpointSize        = MIDI_STREAM_EPSIZE,
+					.PollingIntervalMS   = 0x05
+				},
+
+			.Refresh                  = 0,
+			.SyncEndpointNumber       = 0
+		},
+
+	.MIDI_Out_Jack_Endpoint_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint},
+			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
+
+			.TotalEmbeddedJacks       = 0x01,
+			.AssociatedJackID         = {0x03}
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA MIDI Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MIDI/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/MIDI/Descriptors.h
new file mode 100644
index 000000000..44737d7c4
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MIDI/Descriptors.h
@@ -0,0 +1,108 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+	/* Macros: */
+		/** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */
+		#define MIDI_STREAM_IN_EPADDR       (ENDPOINT_DIR_IN  | 2)
+
+		/** Endpoint address of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */
+		#define MIDI_STREAM_OUT_EPADDR      (ENDPOINT_DIR_OUT | 1)
+
+		/** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */
+		#define MIDI_STREAM_EPSIZE          64
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t     Config;
+
+			// MIDI Audio Control Interface
+			USB_Descriptor_Interface_t                Audio_ControlInterface;
+			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
+
+			// MIDI Audio Streaming Interface
+			USB_Descriptor_Interface_t                Audio_StreamInterface;
+			USB_MIDI_Descriptor_AudioInterface_AS_t   Audio_StreamInterface_SPC;
+			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Emb;
+			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Ext;
+			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Emb;
+			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Ext;
+			USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_In_Jack_Endpoint;
+			USB_MIDI_Descriptor_Jack_Endpoint_t       MIDI_In_Jack_Endpoint_SPC;
+			USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_Out_Jack_Endpoint;
+			USB_MIDI_Descriptor_Jack_Endpoint_t       MIDI_Out_Jack_Endpoint_SPC;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
+			INTERFACE_ID_AudioStream  = 1, /**< Audio streaming interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MIDI/MIDI.c b/lib/lufa/Demos/Device/ClassDriver/MIDI/MIDI.c
new file mode 100644
index 000000000..d52542234
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MIDI/MIDI.c
@@ -0,0 +1,211 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the MIDI demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "MIDI.h"
+
+/** LUFA MIDI Class driver interface configuration and state information. This structure is
+ *  passed to all MIDI Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_MIDI_Device_t Keyboard_MIDI_Interface =
+	{
+		.Config =
+			{
+				.StreamingInterfaceNumber = INTERFACE_ID_AudioStream,
+				.DataINEndpoint           =
+					{
+						.Address          = MIDI_STREAM_IN_EPADDR,
+						.Size             = MIDI_STREAM_EPSIZE,
+						.Banks            = 1,
+					},
+				.DataOUTEndpoint          =
+					{
+						.Address          = MIDI_STREAM_OUT_EPADDR,
+						.Size             = MIDI_STREAM_EPSIZE,
+						.Banks            = 1,
+					},
+			},
+	};
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		CheckJoystickMovement();
+
+		MIDI_EventPacket_t ReceivedMIDIEvent;
+		while (MIDI_Device_ReceiveEventPacket(&Keyboard_MIDI_Interface, &ReceivedMIDIEvent))
+		{
+			if ((ReceivedMIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)) && (ReceivedMIDIEvent.Data3 > 0))
+			  LEDs_SetAllLEDs(ReceivedMIDIEvent.Data2 > 64 ? LEDS_LED1 : LEDS_LED2);
+			else
+			  LEDs_SetAllLEDs(LEDS_NO_LEDS);
+		}
+
+		MIDI_Device_USBTask(&Keyboard_MIDI_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	Buttons_Init();
+	USB_Init();
+}
+
+/** Checks for changes in the position of the board joystick, sending MIDI events to the host upon each change. */
+void CheckJoystickMovement(void)
+{
+	static uint8_t PrevJoystickStatus;
+
+	uint8_t MIDICommand = 0;
+	uint8_t MIDIPitch;
+
+	/* Get current joystick mask, XOR with previous to detect joystick changes */
+	uint8_t JoystickStatus  = Joystick_GetStatus();
+	uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);
+
+	/* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */
+	uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1));
+
+	if (JoystickChanges & JOY_LEFT)
+	{
+		MIDICommand = ((JoystickStatus & JOY_LEFT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+		MIDIPitch   = 0x3C;
+	}
+
+	if (JoystickChanges & JOY_UP)
+	{
+		MIDICommand = ((JoystickStatus & JOY_UP)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+		MIDIPitch   = 0x3D;
+	}
+
+	if (JoystickChanges & JOY_RIGHT)
+	{
+		MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+		MIDIPitch   = 0x3E;
+	}
+
+	if (JoystickChanges & JOY_DOWN)
+	{
+		MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+		MIDIPitch   = 0x3F;
+	}
+
+	if (JoystickChanges & JOY_PRESS)
+	{
+		MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+		MIDIPitch   = 0x3B;
+	}
+
+	if (MIDICommand)
+	{
+		MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
+			{
+				.Event       = MIDI_EVENT(0, MIDICommand),
+
+				.Data1       = MIDICommand | Channel,
+				.Data2       = MIDIPitch,
+				.Data3       = MIDI_STANDARD_VELOCITY,
+			};
+
+		MIDI_Device_SendEventPacket(&Keyboard_MIDI_Interface, &MIDIEvent);
+		MIDI_Device_Flush(&Keyboard_MIDI_Interface);
+	}
+
+	PrevJoystickStatus = JoystickStatus;
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= MIDI_Device_ConfigureEndpoints(&Keyboard_MIDI_Interface);
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	MIDI_Device_ProcessControlRequest(&Keyboard_MIDI_Interface);
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MIDI/MIDI.h b/lib/lufa/Demos/Device/ClassDriver/MIDI/MIDI.h
new file mode 100644
index 000000000..c59b4253d
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MIDI/MIDI.h
@@ -0,0 +1,78 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for MIDI.c.
+ */
+
+#ifndef _MIDI_H_
+#define _MIDI_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdbool.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void CheckJoystickMovement(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MIDI/MIDI.txt b/lib/lufa/Demos/Device/ClassDriver/MIDI/MIDI.txt
new file mode 100644
index 000000000..97a92a190
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MIDI/MIDI.txt
@@ -0,0 +1,78 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage MIDI Input Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Audio Class</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Standard Audio Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Audio Class Specification \n
+ *        USB-MIDI Audio Class Extension Specification \n
+ *        General MIDI Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  MIDI demonstration application. This gives a simple reference
+ *  application for implementing the USB-MIDI class in USB devices.
+ *  It is built upon the USB Audio class.
+ *
+ *  Joystick movements are translated into note on/off messages and
+ *  are sent to the host PC as MIDI streams which can be read by any
+ *  MIDI program supporting MIDI IN devices.
+ *
+ *  If the HWB is not pressed, channel 1 (default piano) is used. If
+ *  the HWB is pressed, then channel 10 (default percussion) is selected.
+ *
+ *  This device implements MIDI-THRU mode, with the IN MIDI data being
+ *  generated by the device itself. OUT MIDI data is discarded.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MIDI/asf.xml b/lib/lufa/Demos/Device/ClassDriver/MIDI/asf.xml
new file mode 100644
index 000000000..33a4fd583
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MIDI/asf.xml
@@ -0,0 +1,62 @@
+<asf xmlversion="1.0">

+	<project caption="MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.midi.example.avr8">

+		<require idref="lufa.demos.device.class.midi"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.midi.example.xmega">

+		<require idref="lufa.demos.device.class.midi"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.midi" caption="MIDI Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		MIDI device demo, implementing a basic USB MIDI device that can send messages to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="MIDI Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="MIDI.txt"/>

+

+		<build type="c-source" value="MIDI.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="MIDI.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.buttons"/>

+		<require idref="lufa.drivers.board.joystick"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/MIDI/doxyfile b/lib/lufa/Demos/Device/ClassDriver/MIDI/doxyfile
new file mode 100644
index 000000000..e7bfea0c0
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MIDI/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - MIDI Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/MIDI/makefile b/lib/lufa/Demos/Device/ClassDriver/MIDI/makefile
new file mode 100644
index 000000000..f030a1e72
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MIDI/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = MIDI
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorage/Config/AppConfig.h b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Config/AppConfig.h
new file mode 100644
index 000000000..b18b2c414
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Config/AppConfig.h
@@ -0,0 +1,50 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define TOTAL_LUNS                1
+
+	#define DISK_READ_ONLY            false
+
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorage/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Config/LUFAConfig.h
new file mode 100644
index 000000000..0ec4635eb
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               4
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorage/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Descriptors.c
new file mode 100644
index 000000000..115a7482c
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Descriptors.c
@@ -0,0 +1,194 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2045,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = USB_CONFIG_ATTR_RESERVED,
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.MS_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_MassStorage,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = MS_CSCP_MassStorageClass,
+			.SubClass               = MS_CSCP_SCSITransparentSubclass,
+			.Protocol               = MS_CSCP_BulkOnlyTransportProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.MS_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = MASS_STORAGE_IN_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.MS_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = MASS_STORAGE_OUT_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mass Storage Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorage/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Descriptors.h
new file mode 100644
index 000000000..1124deb64
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Descriptors.h
@@ -0,0 +1,98 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
+		#define MASS_STORAGE_IN_EPADDR         (ENDPOINT_DIR_IN  | 3)
+
+		/** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */
+		#define MASS_STORAGE_OUT_EPADDR        (ENDPOINT_DIR_OUT | 4)
+
+		/** Size in bytes of the Mass Storage data endpoints. */
+		#define MASS_STORAGE_IO_EPSIZE         64
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Mass Storage Interface
+			USB_Descriptor_Interface_t            MS_Interface;
+			USB_Descriptor_Endpoint_t             MS_DataInEndpoint;
+			USB_Descriptor_Endpoint_t             MS_DataOutEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_MassStorage = 0, /**< Mass storage interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c
new file mode 100644
index 000000000..c0fd16ccc
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c
@@ -0,0 +1,534 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Functions to manage the physical Dataflash media, including reading and writing of
+ *  blocks of data. These functions are called by the SCSI layer when data must be stored
+ *  or retrieved to/from the physical storage media. If a different media is used (such
+ *  as a SD card or EEPROM), functions similar to these will need to be generated.
+ */
+
+#define  INCLUDE_FROM_DATAFLASHMANAGER_C
+#include "DataflashManager.h"
+
+/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
+ *  the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes
+ *  them to the Dataflash in Dataflash page sized blocks.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
+ *  \param[in] BlockAddress  Data block starting address for the write sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to write
+ */
+void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+                                  const uint32_t BlockAddress,
+                                  uint16_t TotalBlocks)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+	bool     UsingSecondBuffer   = false;
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+	/* Copy selected dataflash's current page contents to the Dataflash buffer */
+	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
+	Dataflash_SendAddressBytes(CurrDFPage, 0);
+	Dataflash_WaitWhileBusy();
+#endif
+
+	/* Send the Dataflash buffer write command */
+	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
+	Dataflash_SendAddressBytes(0, CurrDFPageByte);
+
+	/* Wait until endpoint is ready before continuing */
+	if (Endpoint_WaitUntilReady())
+	  return;
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Write an endpoint packet sized data block to the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if the endpoint is currently empty */
+			if (!(Endpoint_IsReadWriteAllowed()))
+			{
+				/* Clear the current endpoint bank */
+				Endpoint_ClearOUT();
+
+				/* Wait until the host has sent another packet */
+				if (Endpoint_WaitUntilReady())
+				  return;
+			}
+
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Write the Dataflash buffer contents back to the Dataflash page */
+				Dataflash_WaitWhileBusy();
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
+				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
+				  UsingSecondBuffer = !(UsingSecondBuffer);
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
+				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
+				{
+					/* Copy selected dataflash's current page contents to the Dataflash buffer */
+					Dataflash_WaitWhileBusy();
+					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
+					Dataflash_SendAddressBytes(CurrDFPage, 0);
+					Dataflash_WaitWhileBusy();
+				}
+#endif
+
+				/* Send the Dataflash buffer write command */
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
+				Dataflash_SendAddressBytes(0, 0);
+			}
+
+			/* Write one 16-byte chunk of data to the Dataflash */
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+
+			/* Check if the current command is being aborted by the host */
+			if (MSInterfaceInfo->State.IsMassStoreReset)
+			  return;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* Write the Dataflash buffer contents back to the Dataflash page */
+	Dataflash_WaitWhileBusy();
+	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
+	Dataflash_WaitWhileBusy();
+
+	/* If the endpoint is empty, clear it ready for the next packet from the host */
+	if (!(Endpoint_IsReadWriteAllowed()))
+	  Endpoint_ClearOUT();
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
+ *  the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash
+ *  and writes them in OS sized blocks to the endpoint.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
+ *  \param[in] BlockAddress  Data block starting address for the read sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to read
+ */
+void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+                                 const uint32_t BlockAddress,
+                                 uint16_t TotalBlocks)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+	/* Send the Dataflash main memory page read command */
+	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+
+	/* Wait until endpoint is ready before continuing */
+	if (Endpoint_WaitUntilReady())
+	  return;
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Read an endpoint packet sized data block from the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if the endpoint is currently full */
+			if (!(Endpoint_IsReadWriteAllowed()))
+			{
+				/* Clear the endpoint bank to send its contents to the host */
+				Endpoint_ClearIN();
+
+				/* Wait until the endpoint is ready for more data */
+				if (Endpoint_WaitUntilReady())
+				  return;
+			}
+
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+				/* Send the Dataflash main memory page read command */
+				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+			}
+
+			/* Read one 16-byte chunk of data from the Dataflash */
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+
+			/* Check if the current command is being aborted by the host */
+			if (MSInterfaceInfo->State.IsMassStoreReset)
+			  return;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* If the endpoint is full, send its contents to the host */
+	if (!(Endpoint_IsReadWriteAllowed()))
+	  Endpoint_ClearIN();
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
+ *  the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the
+ *  Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
+ *  Dataflash.
+ *
+ *  \param[in] BlockAddress  Data block starting address for the write sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to write
+ *  \param[in] BufferPtr     Pointer to the data source RAM buffer
+ */
+void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
+                                      uint16_t TotalBlocks,
+                                      uint8_t* BufferPtr)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+	bool     UsingSecondBuffer   = false;
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+	/* Copy selected dataflash's current page contents to the Dataflash buffer */
+	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
+	Dataflash_SendAddressBytes(CurrDFPage, 0);
+	Dataflash_WaitWhileBusy();
+#endif
+
+	/* Send the Dataflash buffer write command */
+	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
+	Dataflash_SendAddressBytes(0, CurrDFPageByte);
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Write an endpoint packet sized data block to the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Write the Dataflash buffer contents back to the Dataflash page */
+				Dataflash_WaitWhileBusy();
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
+				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
+				  UsingSecondBuffer = !(UsingSecondBuffer);
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
+				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
+				{
+					/* Copy selected dataflash's current page contents to the Dataflash buffer */
+					Dataflash_WaitWhileBusy();
+					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
+					Dataflash_SendAddressBytes(CurrDFPage, 0);
+					Dataflash_WaitWhileBusy();
+				}
+#endif
+
+				/* Send the Dataflash buffer write command */
+				Dataflash_ToggleSelectedChipCS();
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
+				Dataflash_SendAddressBytes(0, 0);
+			}
+
+			/* Write one 16-byte chunk of data to the Dataflash */
+			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
+			  Dataflash_SendByte(*(BufferPtr++));
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* Write the Dataflash buffer contents back to the Dataflash page */
+	Dataflash_WaitWhileBusy();
+	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
+	Dataflash_WaitWhileBusy();
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
+ *  the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash
+ *  and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read
+ *  the files stored on the Dataflash.
+ *
+ *  \param[in] BlockAddress  Data block starting address for the read sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to read
+ *  \param[out] BufferPtr    Pointer to the data destination RAM buffer
+ */
+void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
+                                     uint16_t TotalBlocks,
+                                     uint8_t* BufferPtr)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+	/* Send the Dataflash main memory page read command */
+	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Read an endpoint packet sized data block from the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+				/* Send the Dataflash main memory page read command */
+				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+			}
+
+			/* Read one 16-byte chunk of data from the Dataflash */
+			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
+			  *(BufferPtr++) = Dataflash_ReceiveByte();
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
+void DataflashManager_ResetDataflashProtections(void)
+{
+	/* Select first Dataflash chip, send the read status register command */
+	Dataflash_SelectChip(DATAFLASH_CHIP1);
+	Dataflash_SendByte(DF_CMD_GETSTATUS);
+
+	/* Check if sector protection is enabled */
+	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
+	{
+		Dataflash_ToggleSelectedChipCS();
+
+		/* Send the commands to disable sector protection */
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
+	}
+
+	/* Select second Dataflash chip (if present on selected board), send read status register command */
+	#if (DATAFLASH_TOTALCHIPS == 2)
+	Dataflash_SelectChip(DATAFLASH_CHIP2);
+	Dataflash_SendByte(DF_CMD_GETSTATUS);
+
+	/* Check if sector protection is enabled */
+	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
+	{
+		Dataflash_ToggleSelectedChipCS();
+
+		/* Send the commands to disable sector protection */
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
+	}
+	#endif
+
+	/* Deselect current Dataflash chip */
+	Dataflash_DeselectChip();
+}
+
+/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working.
+ *
+ *  \return Boolean \c true if all media chips are working, \c false otherwise
+ */
+bool DataflashManager_CheckDataflashOperation(void)
+{
+	uint8_t ReturnByte;
+
+	/* Test first Dataflash IC is present and responding to commands */
+	Dataflash_SelectChip(DATAFLASH_CHIP1);
+	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
+	ReturnByte = Dataflash_ReceiveByte();
+	Dataflash_DeselectChip();
+
+	/* If returned data is invalid, fail the command */
+	if (ReturnByte != DF_MANUFACTURER_ATMEL)
+	  return false;
+
+	#if (DATAFLASH_TOTALCHIPS == 2)
+	/* Test second Dataflash IC is present and responding to commands */
+	Dataflash_SelectChip(DATAFLASH_CHIP2);
+	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
+	ReturnByte = Dataflash_ReceiveByte();
+	Dataflash_DeselectChip();
+
+	/* If returned data is invalid, fail the command */
+	if (ReturnByte != DF_MANUFACTURER_ATMEL)
+	  return false;
+	#endif
+
+	return true;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h
new file mode 100644
index 000000000..b33f3f46d
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h
@@ -0,0 +1,89 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for DataflashManager.c.
+ */
+
+#ifndef _DATAFLASH_MANAGER_H_
+#define _DATAFLASH_MANAGER_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+
+		#include "../MassStorage.h"
+		#include "../Descriptors.h"
+		#include "Config/AppConfig.h"
+
+		#include <LUFA/Common/Common.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/Dataflash.h>
+
+	/* Preprocessor Checks: */
+		#if (DATAFLASH_PAGE_SIZE % 16)
+			#error Dataflash page size must be a multiple of 16 bytes.
+		#endif
+
+	/* Defines: */
+		/** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */
+		#define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
+
+		/** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
+		 *  storage media (Dataflash) using a different native block size. Do not change this value.
+		 */
+		#define VIRTUAL_MEMORY_BLOCK_SIZE           512
+
+		/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not
+		 *  change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size.
+		 */
+		#define VIRTUAL_MEMORY_BLOCKS               (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
+
+		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
+		#define LUN_MEDIA_BLOCKS                    (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
+
+	/* Function Prototypes: */
+		void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+		                                  const uint32_t BlockAddress,
+		                                  uint16_t TotalBlocks);
+		void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+		                                 const uint32_t BlockAddress,
+		                                 uint16_t TotalBlocks);
+		void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
+		                                      uint16_t TotalBlocks,
+		                                      uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
+		void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
+		                                     uint16_t TotalBlocks,
+		                                     uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
+		void DataflashManager_ResetDataflashProtections(void);
+		bool DataflashManager_CheckDataflashOperation(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c
new file mode 100644
index 000000000..8780d1603
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c
@@ -0,0 +1,349 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  SCSI command processing routines, for SCSI commands issued by the host. Mass Storage
+ *  devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information,
+ *  which wrap around standard SCSI device commands for controlling the actual storage medium.
+ */
+
+#define  INCLUDE_FROM_SCSI_C
+#include "SCSI.h"
+
+/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
+ *  features and capabilities.
+ */
+static const SCSI_Inquiry_Response_t InquiryData =
+	{
+		.DeviceType          = DEVICE_TYPE_BLOCK,
+		.PeripheralQualifier = 0,
+
+		.Removable           = true,
+
+		.Version             = 0,
+
+		.ResponseDataFormat  = 2,
+		.NormACA             = false,
+		.TrmTsk              = false,
+		.AERC                = false,
+
+		.AdditionalLength    = 0x1F,
+
+		.SoftReset           = false,
+		.CmdQue              = false,
+		.Linked              = false,
+		.Sync                = false,
+		.WideBus16Bit        = false,
+		.WideBus32Bit        = false,
+		.RelAddr             = false,
+
+		.VendorID            = "LUFA",
+		.ProductID           = "Dataflash Disk",
+		.RevisionID          = {'0','.','0','0'},
+	};
+
+/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE
+ *  command is issued. This gives information on exactly why the last command failed to complete.
+ */
+static SCSI_Request_Sense_Response_t SenseData =
+	{
+		.ResponseCode        = 0x70,
+		.AdditionalLength    = 0x0A,
+	};
+
+
+/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches
+ *  to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns
+ *  a command failure due to a ILLEGAL REQUEST.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise
+ */
+bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	bool CommandSuccess = false;
+
+	/* Run the appropriate SCSI command hander function based on the passed command */
+	switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0])
+	{
+		case SCSI_CMD_INQUIRY:
+			CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_REQUEST_SENSE:
+			CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_READ_CAPACITY_10:
+			CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_SEND_DIAGNOSTIC:
+			CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_WRITE_10:
+			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE);
+			break;
+		case SCSI_CMD_READ_10:
+			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ);
+			break;
+		case SCSI_CMD_MODE_SENSE_6:
+			CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_START_STOP_UNIT:
+		case SCSI_CMD_TEST_UNIT_READY:
+		case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
+		case SCSI_CMD_VERIFY_10:
+			/* These commands should just succeed, no handling required */
+			CommandSuccess = true;
+			MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
+			break;
+		default:
+			/* Update the SENSE key to reflect the invalid command */
+			SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		                   SCSI_ASENSE_INVALID_COMMAND,
+		                   SCSI_ASENSEQ_NO_QUALIFIER);
+			break;
+	}
+
+	/* Check if command was successfully processed */
+	if (CommandSuccess)
+	{
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD,
+		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return true;
+	}
+
+	return false;
+}
+
+/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features
+ *  and capabilities to the host.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	uint16_t AllocationLength  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]);
+	uint16_t BytesTransferred  = MIN(AllocationLength, sizeof(InquiryData));
+
+	/* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */
+	if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||
+	     MSInterfaceInfo->State.CommandBlock.SCSICommandData[2])
+	{
+		/* Optional but unsupported bits set - update the SENSE key and fail the request */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL);
+
+	/* Pad out remaining bytes with 0x00 */
+	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
+
+	/* Finalize the stream transfer to send the last packet */
+	Endpoint_ClearIN();
+
+	/* Succeed the command and update the bytes transferred counter */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command,
+ *  including the error code and additional error information so that the host can determine why a command failed to complete.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	uint8_t  AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];
+	uint8_t  BytesTransferred = MIN(AllocationLength, sizeof(SenseData));
+
+	Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL);
+	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
+	Endpoint_ClearIN();
+
+	/* Succeed the command and update the bytes transferred counter */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity
+ *  on the selected Logical Unit (drive), as a number of OS-sized blocks.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	uint32_t LastBlockAddressInLUN = (LUN_MEDIA_BLOCKS - 1);
+	uint32_t MediaBlockSize        = VIRTUAL_MEMORY_BLOCK_SIZE;
+
+	Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL);
+	Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL);
+	Endpoint_ClearIN();
+
+	/* Succeed the command and update the bytes transferred counter */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the
+ *  board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is
+ *  supported.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	/* Check to see if the SELF TEST bit is not set */
+	if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2)))
+	{
+		/* Only self-test supported - update SENSE key and fail the command */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	/* Check to see if all attached Dataflash ICs are functional */
+	if (!(DataflashManager_CheckDataflashOperation()))
+	{
+		/* Update SENSE key with a hardware error condition and return command fail */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR,
+		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	/* Succeed the command and update the bytes transferred counter */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address
+ *  and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual
+ *  reading and writing of the data.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *  \param[in] IsDataRead  Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+                                      const bool IsDataRead)
+{
+	uint32_t BlockAddress;
+	uint16_t TotalBlocks;
+
+	/* Check if the disk is write protected or not */
+	if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY)
+	{
+		/* Block address is invalid, update SENSE key and return command fail */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT,
+		               SCSI_ASENSE_WRITE_PROTECTED,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
+	BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);
+
+	/* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */
+	TotalBlocks  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]);
+
+	/* Check if the block address is outside the maximum allowable value for the LUN */
+	if (BlockAddress >= LUN_MEDIA_BLOCKS)
+	{
+		/* Block address is invalid, update SENSE key and return command fail */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		               SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	#if (TOTAL_LUNS > 1)
+	/* Adjust the given block address to the real media address based on the selected LUN */
+	BlockAddress += ((uint32_t)MSInterfaceInfo->State.CommandBlock.LUN * LUN_MEDIA_BLOCKS);
+	#endif
+
+	/* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
+	if (IsDataRead == DATA_READ)
+	  DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
+	else
+	  DataflashManager_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
+
+	/* Update the bytes transferred counter and succeed the command */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);
+
+	return true;
+}
+
+/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about
+ *  the SCSI device, as well as the device's Write Protect status.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	/* Send an empty header response with the Write Protect flag status */
+	Endpoint_Write_8(0x00);
+	Endpoint_Write_8(0x00);
+	Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00);
+	Endpoint_Write_8(0x00);
+	Endpoint_ClearIN();
+
+	/* Update the bytes transferred counter and succeed the command */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4;
+
+	return true;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h
new file mode 100644
index 000000000..16eb78aa1
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h
@@ -0,0 +1,89 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for SCSI.c.
+ */
+
+#ifndef _SCSI_H_
+#define _SCSI_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include "../MassStorage.h"
+		#include "../Descriptors.h"
+		#include "DataflashManager.h"
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
+		 *  is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
+		 *  the last command failure) in a quick and easy manner.
+		 *
+		 *  \param[in] Key    New SCSI sense key to set the sense code to
+		 *  \param[in] Acode  New SCSI additional sense key to set the additional sense code to
+		 *  \param[in] Aqual  New SCSI additional sense key qualifier to set the additional sense qualifier code to
+		 */
+		#define SCSI_SET_SENSE(Key, Acode, Aqual)  do { SenseData.SenseKey                 = (Key);   \
+		                                                SenseData.AdditionalSenseCode      = (Acode); \
+		                                                SenseData.AdditionalSenseQualifier = (Aqual); } while (0)
+
+		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */
+		#define DATA_READ           true
+
+		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */
+		#define DATA_WRITE          false
+
+		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */
+		#define DEVICE_TYPE_BLOCK   0x00
+
+		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */
+		#define DEVICE_TYPE_CDROM   0x05
+
+	/* Function Prototypes: */
+		bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+
+		#if defined(INCLUDE_FROM_SCSI_C)
+			static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+			static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+			static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+			static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+			static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+			                                      const bool IsDataRead);
+			static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+		#endif
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorage/MassStorage.c b/lib/lufa/Demos/Device/ClassDriver/MassStorage/MassStorage.c
new file mode 100644
index 000000000..7cf8a3e5d
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorage/MassStorage.c
@@ -0,0 +1,162 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the MassStorage demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "MassStorage.h"
+
+/** LUFA Mass Storage Class driver interface configuration and state information. This structure is
+ *  passed to all Mass Storage Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_MS_Device_t Disk_MS_Interface =
+	{
+		.Config =
+			{
+				.InterfaceNumber           = INTERFACE_ID_MassStorage,
+				.DataINEndpoint            =
+					{
+						.Address           = MASS_STORAGE_IN_EPADDR,
+						.Size              = MASS_STORAGE_IO_EPSIZE,
+						.Banks             = 1,
+					},
+				.DataOUTEndpoint           =
+					{
+						.Address           = MASS_STORAGE_OUT_EPADDR,
+						.Size              = MASS_STORAGE_IO_EPSIZE,
+						.Banks             = 1,
+					},
+				.TotalLUNs                 = TOTAL_LUNS,
+			},
+	};
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		MS_Device_USBTask(&Disk_MS_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	Dataflash_Init();
+	USB_Init();
+
+	/* Check if the Dataflash is working, abort if not */
+	if (!(DataflashManager_CheckDataflashOperation()))
+	{
+		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+		for(;;);
+	}
+
+	/* Clear Dataflash sector protections, if enabled */
+	DataflashManager_ResetDataflashProtections();
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= MS_Device_ConfigureEndpoints(&Disk_MS_Interface);
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	MS_Device_ProcessControlRequest(&Disk_MS_Interface);
+}
+
+/** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface configuration structure being referenced
+ */
+bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	bool CommandSuccess;
+
+	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+	CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo);
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+
+	return CommandSuccess;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorage/MassStorage.h b/lib/lufa/Demos/Device/ClassDriver/MassStorage/MassStorage.h
new file mode 100644
index 000000000..2d07a2198
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorage/MassStorage.h
@@ -0,0 +1,83 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for MassStorage.c.
+ */
+
+#ifndef _MASS_STORAGE_H_
+#define _MASS_STORAGE_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include "Lib/SCSI.h"
+		#include "Lib/DataflashManager.h"
+		#include "Config/AppConfig.h"
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+		#define LEDMASK_USB_BUSY          LEDS_LED2
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+		bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorage/MassStorage.txt b/lib/lufa/Demos/Device/ClassDriver/MassStorage/MassStorage.txt
new file mode 100644
index 000000000..5759efa6b
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorage/MassStorage.txt
@@ -0,0 +1,100 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Mass Storage Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Mass Storage Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Bulk-Only Transport</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Mass Storage Standard \n
+ *        USB Bulk-Only Transport Standard \n
+ *        SCSI Primary Commands Specification \n
+ *        SCSI Block Commands Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Mass Storage device demonstration application. This gives a simple
+ *  reference application for implementing a USB Mass Storage device using
+ *  the basic USB UFI drivers in all modern OSes (i.e. no special drivers
+ *  required).
+ *
+ *  On start-up the system will automatically enumerate and function as an
+ *  external mass storage device which may be formatted and used in the same
+ *  manner as commercial USB Mass Storage devices.
+ *
+ *  You will need to format the mass storage drive upon first run of this
+ *  demonstration - as the device acts only as a data block transport between
+ *  the host and the storage media, it does not matter what file system is used,
+ *  as the data interpretation is performed by the host and not the USB device.
+ *
+ *  This demo is not restricted to only a single LUN (logical disk); by changing
+ *  the TOTAL_LUNS value in DataflashManager.h, any number of LUNs can be used
+ *  (from 1 to 255), with each LUN being allocated an equal portion of the available
+ *  Dataflash memory.
+ *
+ *  The USB control endpoint is managed entirely by the library using endpoint
+ *  interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for
+ *  the host to reset the Mass Storage device state during long transfers without
+ *  the need for complicated polling logic.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>TOTAL_LUNS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
+ *        this can be set to any positive non-zero amount.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>DISK_READ_ONLY</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configuration define, indicating if the disk should be write protected or not.</td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorage/asf.xml b/lib/lufa/Demos/Device/ClassDriver/MassStorage/asf.xml
new file mode 100644
index 000000000..6f5a8dc03
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorage/asf.xml
@@ -0,0 +1,67 @@
+<asf xmlversion="1.0">

+	<project caption="Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage.example.avr8">

+		<require idref="lufa.demos.device.class.mass_storage"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage.example.xmega">

+		<require idref="lufa.demos.device.class.mass_storage"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.mass_storage" caption="Mass Storage Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Mass Storage device demo, implementing a basic USB storage disk using a Dataflash memory IC. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="Mass Storage Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="MassStorage.txt"/>

+

+		<build type="c-source" value="MassStorage.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="c-source" value="Lib/DataflashManager.c"/>

+		<build type="c-source" value="Lib/SCSI.c"/>

+		<build type="header-file" value="MassStorage.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+		<build type="header-file" value="Lib/DataflashManager.h"/>

+		<build type="header-file" value="Lib/SCSI.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

+		<build type="header-file" value="Config/AppConfig.h"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.dataflash"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorage/doxyfile b/lib/lufa/Demos/Device/ClassDriver/MassStorage/doxyfile
new file mode 100644
index 000000000..84c2d3d0b
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorage/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Mass Storage Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorage/makefile b/lib/lufa/Demos/Device/ClassDriver/MassStorage/makefile
new file mode 100644
index 000000000..3239b24db
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorage/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = MassStorage
+SRC          = $(TARGET).c Descriptors.c Lib/DataflashManager.c Lib/SCSI.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Config/AppConfig.h b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Config/AppConfig.h
new file mode 100644
index 000000000..b18b2c414
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Config/AppConfig.h
@@ -0,0 +1,50 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define TOTAL_LUNS                1
+
+	#define DISK_READ_ONLY            false
+
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Config/LUFAConfig.h
new file mode 100644
index 000000000..62549878d
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               5
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c
new file mode 100644
index 000000000..15cbc63b2
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c
@@ -0,0 +1,254 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+
+/** HID class report descriptor. This is a special descriptor constructed with values from the
+ *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
+ *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
+ *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
+ *  more details on HID report descriptors.
+ */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
+{
+	/* Use the HID class driver's standard Keyboard report.
+	 *   Max simultaneous keys: 6
+	 */
+	HID_DESCRIPTOR_KEYBOARD(6)
+};
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2061,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 2,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = USB_CONFIG_ATTR_RESERVED,
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.MS_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_MassStorage,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = MS_CSCP_MassStorageClass,
+			.SubClass               = MS_CSCP_SCSITransparentSubclass,
+			.Protocol               = MS_CSCP_BulkOnlyTransportProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.MS_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = MASS_STORAGE_IN_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.MS_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = MASS_STORAGE_OUT_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.HID_KeyboardInterface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_Keyboard,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_BootSubclass,
+			.Protocol               = HID_CSCP_KeyboardBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID_KeyboardHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(KeyboardReport)
+		},
+
+	.HID_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = KEYBOARD_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = KEYBOARD_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mass Storage and Keyboard Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+		case HID_DTYPE_HID:
+			Address = &ConfigurationDescriptor.HID_KeyboardHID;
+			Size    = sizeof(USB_HID_Descriptor_HID_t);
+			break;
+		case HID_DTYPE_Report:
+			Address = &KeyboardReport;
+			Size    = sizeof(KeyboardReport);
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h
new file mode 100644
index 000000000..b16e900e4
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h
@@ -0,0 +1,111 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Endpoint address of the Keyboard HID reporting IN endpoint. */
+		#define KEYBOARD_EPADDR              (ENDPOINT_DIR_IN  | 1)
+
+		/** Size in bytes of the Keyboard HID reporting IN endpoint. */
+		#define KEYBOARD_EPSIZE              8
+
+		/** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
+		#define MASS_STORAGE_IN_EPADDR       (ENDPOINT_DIR_IN  | 3)
+
+		/** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */
+		#define MASS_STORAGE_OUT_EPADDR      (ENDPOINT_DIR_OUT | 4)
+
+		/** Size in bytes of the Mass Storage data endpoints. */
+		#define MASS_STORAGE_IO_EPSIZE       64
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Mass Storage Interface
+			USB_Descriptor_Interface_t            MS_Interface;
+			USB_Descriptor_Endpoint_t             MS_DataInEndpoint;
+			USB_Descriptor_Endpoint_t             MS_DataOutEndpoint;
+
+			// Generic HID Interface
+			USB_Descriptor_Interface_t            HID_KeyboardInterface;
+			USB_HID_Descriptor_HID_t              HID_KeyboardHID;
+	        USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_MassStorage = 0, /**< Mass storage interface descriptor ID */
+			INTERFACE_ID_Keyboard    = 1, /**< Keyboard interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c
new file mode 100644
index 000000000..c0fd16ccc
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c
@@ -0,0 +1,534 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Functions to manage the physical Dataflash media, including reading and writing of
+ *  blocks of data. These functions are called by the SCSI layer when data must be stored
+ *  or retrieved to/from the physical storage media. If a different media is used (such
+ *  as a SD card or EEPROM), functions similar to these will need to be generated.
+ */
+
+#define  INCLUDE_FROM_DATAFLASHMANAGER_C
+#include "DataflashManager.h"
+
+/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
+ *  the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes
+ *  them to the Dataflash in Dataflash page sized blocks.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
+ *  \param[in] BlockAddress  Data block starting address for the write sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to write
+ */
+void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+                                  const uint32_t BlockAddress,
+                                  uint16_t TotalBlocks)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+	bool     UsingSecondBuffer   = false;
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+	/* Copy selected dataflash's current page contents to the Dataflash buffer */
+	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
+	Dataflash_SendAddressBytes(CurrDFPage, 0);
+	Dataflash_WaitWhileBusy();
+#endif
+
+	/* Send the Dataflash buffer write command */
+	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
+	Dataflash_SendAddressBytes(0, CurrDFPageByte);
+
+	/* Wait until endpoint is ready before continuing */
+	if (Endpoint_WaitUntilReady())
+	  return;
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Write an endpoint packet sized data block to the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if the endpoint is currently empty */
+			if (!(Endpoint_IsReadWriteAllowed()))
+			{
+				/* Clear the current endpoint bank */
+				Endpoint_ClearOUT();
+
+				/* Wait until the host has sent another packet */
+				if (Endpoint_WaitUntilReady())
+				  return;
+			}
+
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Write the Dataflash buffer contents back to the Dataflash page */
+				Dataflash_WaitWhileBusy();
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
+				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
+				  UsingSecondBuffer = !(UsingSecondBuffer);
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
+				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
+				{
+					/* Copy selected dataflash's current page contents to the Dataflash buffer */
+					Dataflash_WaitWhileBusy();
+					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
+					Dataflash_SendAddressBytes(CurrDFPage, 0);
+					Dataflash_WaitWhileBusy();
+				}
+#endif
+
+				/* Send the Dataflash buffer write command */
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
+				Dataflash_SendAddressBytes(0, 0);
+			}
+
+			/* Write one 16-byte chunk of data to the Dataflash */
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+
+			/* Check if the current command is being aborted by the host */
+			if (MSInterfaceInfo->State.IsMassStoreReset)
+			  return;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* Write the Dataflash buffer contents back to the Dataflash page */
+	Dataflash_WaitWhileBusy();
+	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
+	Dataflash_WaitWhileBusy();
+
+	/* If the endpoint is empty, clear it ready for the next packet from the host */
+	if (!(Endpoint_IsReadWriteAllowed()))
+	  Endpoint_ClearOUT();
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
+ *  the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash
+ *  and writes them in OS sized blocks to the endpoint.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
+ *  \param[in] BlockAddress  Data block starting address for the read sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to read
+ */
+void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+                                 const uint32_t BlockAddress,
+                                 uint16_t TotalBlocks)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+	/* Send the Dataflash main memory page read command */
+	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+
+	/* Wait until endpoint is ready before continuing */
+	if (Endpoint_WaitUntilReady())
+	  return;
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Read an endpoint packet sized data block from the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if the endpoint is currently full */
+			if (!(Endpoint_IsReadWriteAllowed()))
+			{
+				/* Clear the endpoint bank to send its contents to the host */
+				Endpoint_ClearIN();
+
+				/* Wait until the endpoint is ready for more data */
+				if (Endpoint_WaitUntilReady())
+				  return;
+			}
+
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+				/* Send the Dataflash main memory page read command */
+				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+			}
+
+			/* Read one 16-byte chunk of data from the Dataflash */
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+
+			/* Check if the current command is being aborted by the host */
+			if (MSInterfaceInfo->State.IsMassStoreReset)
+			  return;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* If the endpoint is full, send its contents to the host */
+	if (!(Endpoint_IsReadWriteAllowed()))
+	  Endpoint_ClearIN();
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
+ *  the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the
+ *  Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
+ *  Dataflash.
+ *
+ *  \param[in] BlockAddress  Data block starting address for the write sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to write
+ *  \param[in] BufferPtr     Pointer to the data source RAM buffer
+ */
+void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
+                                      uint16_t TotalBlocks,
+                                      uint8_t* BufferPtr)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+	bool     UsingSecondBuffer   = false;
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+	/* Copy selected dataflash's current page contents to the Dataflash buffer */
+	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
+	Dataflash_SendAddressBytes(CurrDFPage, 0);
+	Dataflash_WaitWhileBusy();
+#endif
+
+	/* Send the Dataflash buffer write command */
+	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
+	Dataflash_SendAddressBytes(0, CurrDFPageByte);
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Write an endpoint packet sized data block to the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Write the Dataflash buffer contents back to the Dataflash page */
+				Dataflash_WaitWhileBusy();
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
+				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
+				  UsingSecondBuffer = !(UsingSecondBuffer);
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
+				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
+				{
+					/* Copy selected dataflash's current page contents to the Dataflash buffer */
+					Dataflash_WaitWhileBusy();
+					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
+					Dataflash_SendAddressBytes(CurrDFPage, 0);
+					Dataflash_WaitWhileBusy();
+				}
+#endif
+
+				/* Send the Dataflash buffer write command */
+				Dataflash_ToggleSelectedChipCS();
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
+				Dataflash_SendAddressBytes(0, 0);
+			}
+
+			/* Write one 16-byte chunk of data to the Dataflash */
+			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
+			  Dataflash_SendByte(*(BufferPtr++));
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* Write the Dataflash buffer contents back to the Dataflash page */
+	Dataflash_WaitWhileBusy();
+	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
+	Dataflash_WaitWhileBusy();
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
+ *  the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash
+ *  and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read
+ *  the files stored on the Dataflash.
+ *
+ *  \param[in] BlockAddress  Data block starting address for the read sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to read
+ *  \param[out] BufferPtr    Pointer to the data destination RAM buffer
+ */
+void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
+                                     uint16_t TotalBlocks,
+                                     uint8_t* BufferPtr)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+	/* Send the Dataflash main memory page read command */
+	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Read an endpoint packet sized data block from the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+				/* Send the Dataflash main memory page read command */
+				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+			}
+
+			/* Read one 16-byte chunk of data from the Dataflash */
+			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
+			  *(BufferPtr++) = Dataflash_ReceiveByte();
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
+void DataflashManager_ResetDataflashProtections(void)
+{
+	/* Select first Dataflash chip, send the read status register command */
+	Dataflash_SelectChip(DATAFLASH_CHIP1);
+	Dataflash_SendByte(DF_CMD_GETSTATUS);
+
+	/* Check if sector protection is enabled */
+	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
+	{
+		Dataflash_ToggleSelectedChipCS();
+
+		/* Send the commands to disable sector protection */
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
+	}
+
+	/* Select second Dataflash chip (if present on selected board), send read status register command */
+	#if (DATAFLASH_TOTALCHIPS == 2)
+	Dataflash_SelectChip(DATAFLASH_CHIP2);
+	Dataflash_SendByte(DF_CMD_GETSTATUS);
+
+	/* Check if sector protection is enabled */
+	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
+	{
+		Dataflash_ToggleSelectedChipCS();
+
+		/* Send the commands to disable sector protection */
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
+	}
+	#endif
+
+	/* Deselect current Dataflash chip */
+	Dataflash_DeselectChip();
+}
+
+/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working.
+ *
+ *  \return Boolean \c true if all media chips are working, \c false otherwise
+ */
+bool DataflashManager_CheckDataflashOperation(void)
+{
+	uint8_t ReturnByte;
+
+	/* Test first Dataflash IC is present and responding to commands */
+	Dataflash_SelectChip(DATAFLASH_CHIP1);
+	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
+	ReturnByte = Dataflash_ReceiveByte();
+	Dataflash_DeselectChip();
+
+	/* If returned data is invalid, fail the command */
+	if (ReturnByte != DF_MANUFACTURER_ATMEL)
+	  return false;
+
+	#if (DATAFLASH_TOTALCHIPS == 2)
+	/* Test second Dataflash IC is present and responding to commands */
+	Dataflash_SelectChip(DATAFLASH_CHIP2);
+	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
+	ReturnByte = Dataflash_ReceiveByte();
+	Dataflash_DeselectChip();
+
+	/* If returned data is invalid, fail the command */
+	if (ReturnByte != DF_MANUFACTURER_ATMEL)
+	  return false;
+	#endif
+
+	return true;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h
new file mode 100644
index 000000000..076847a7d
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h
@@ -0,0 +1,87 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for DataflashManager.c.
+ */
+
+#ifndef _DATAFLASH_MANAGER_H_
+#define _DATAFLASH_MANAGER_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+
+		#include "../MassStorageKeyboard.h"
+		#include "../Descriptors.h"
+		#include "Config/AppConfig.h"
+
+		#include <LUFA/Common/Common.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/Dataflash.h>
+
+	/* Preprocessor Checks: */
+		#if (DATAFLASH_PAGE_SIZE % 16)
+			#error Dataflash page size must be a multiple of 16 bytes.
+		#endif
+
+	/* Defines: */
+		/** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */
+		#define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
+
+		/** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
+		 *  storage media (Dataflash) using a different native block size.
+		 */
+		#define VIRTUAL_MEMORY_BLOCK_SIZE           512
+
+		/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. */
+		#define VIRTUAL_MEMORY_BLOCKS              (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
+
+		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
+		#define LUN_MEDIA_BLOCKS         (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
+
+	/* Function Prototypes: */
+		void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+		                                  const uint32_t BlockAddress,
+		                                  uint16_t TotalBlocks);
+		void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+		                                 const uint32_t BlockAddress,
+		                                 uint16_t TotalBlocks);
+		void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
+		                                      uint16_t TotalBlocks,
+		                                      uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
+		void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
+		                                     uint16_t TotalBlocks,
+		                                     uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
+		void DataflashManager_ResetDataflashProtections(void);
+		bool DataflashManager_CheckDataflashOperation(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c
new file mode 100644
index 000000000..8780d1603
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c
@@ -0,0 +1,349 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  SCSI command processing routines, for SCSI commands issued by the host. Mass Storage
+ *  devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information,
+ *  which wrap around standard SCSI device commands for controlling the actual storage medium.
+ */
+
+#define  INCLUDE_FROM_SCSI_C
+#include "SCSI.h"
+
+/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
+ *  features and capabilities.
+ */
+static const SCSI_Inquiry_Response_t InquiryData =
+	{
+		.DeviceType          = DEVICE_TYPE_BLOCK,
+		.PeripheralQualifier = 0,
+
+		.Removable           = true,
+
+		.Version             = 0,
+
+		.ResponseDataFormat  = 2,
+		.NormACA             = false,
+		.TrmTsk              = false,
+		.AERC                = false,
+
+		.AdditionalLength    = 0x1F,
+
+		.SoftReset           = false,
+		.CmdQue              = false,
+		.Linked              = false,
+		.Sync                = false,
+		.WideBus16Bit        = false,
+		.WideBus32Bit        = false,
+		.RelAddr             = false,
+
+		.VendorID            = "LUFA",
+		.ProductID           = "Dataflash Disk",
+		.RevisionID          = {'0','.','0','0'},
+	};
+
+/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE
+ *  command is issued. This gives information on exactly why the last command failed to complete.
+ */
+static SCSI_Request_Sense_Response_t SenseData =
+	{
+		.ResponseCode        = 0x70,
+		.AdditionalLength    = 0x0A,
+	};
+
+
+/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches
+ *  to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns
+ *  a command failure due to a ILLEGAL REQUEST.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise
+ */
+bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	bool CommandSuccess = false;
+
+	/* Run the appropriate SCSI command hander function based on the passed command */
+	switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0])
+	{
+		case SCSI_CMD_INQUIRY:
+			CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_REQUEST_SENSE:
+			CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_READ_CAPACITY_10:
+			CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_SEND_DIAGNOSTIC:
+			CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_WRITE_10:
+			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE);
+			break;
+		case SCSI_CMD_READ_10:
+			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ);
+			break;
+		case SCSI_CMD_MODE_SENSE_6:
+			CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_START_STOP_UNIT:
+		case SCSI_CMD_TEST_UNIT_READY:
+		case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
+		case SCSI_CMD_VERIFY_10:
+			/* These commands should just succeed, no handling required */
+			CommandSuccess = true;
+			MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
+			break;
+		default:
+			/* Update the SENSE key to reflect the invalid command */
+			SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		                   SCSI_ASENSE_INVALID_COMMAND,
+		                   SCSI_ASENSEQ_NO_QUALIFIER);
+			break;
+	}
+
+	/* Check if command was successfully processed */
+	if (CommandSuccess)
+	{
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD,
+		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return true;
+	}
+
+	return false;
+}
+
+/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features
+ *  and capabilities to the host.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	uint16_t AllocationLength  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]);
+	uint16_t BytesTransferred  = MIN(AllocationLength, sizeof(InquiryData));
+
+	/* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */
+	if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||
+	     MSInterfaceInfo->State.CommandBlock.SCSICommandData[2])
+	{
+		/* Optional but unsupported bits set - update the SENSE key and fail the request */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL);
+
+	/* Pad out remaining bytes with 0x00 */
+	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
+
+	/* Finalize the stream transfer to send the last packet */
+	Endpoint_ClearIN();
+
+	/* Succeed the command and update the bytes transferred counter */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command,
+ *  including the error code and additional error information so that the host can determine why a command failed to complete.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	uint8_t  AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];
+	uint8_t  BytesTransferred = MIN(AllocationLength, sizeof(SenseData));
+
+	Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL);
+	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
+	Endpoint_ClearIN();
+
+	/* Succeed the command and update the bytes transferred counter */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity
+ *  on the selected Logical Unit (drive), as a number of OS-sized blocks.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	uint32_t LastBlockAddressInLUN = (LUN_MEDIA_BLOCKS - 1);
+	uint32_t MediaBlockSize        = VIRTUAL_MEMORY_BLOCK_SIZE;
+
+	Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL);
+	Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL);
+	Endpoint_ClearIN();
+
+	/* Succeed the command and update the bytes transferred counter */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the
+ *  board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is
+ *  supported.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	/* Check to see if the SELF TEST bit is not set */
+	if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2)))
+	{
+		/* Only self-test supported - update SENSE key and fail the command */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	/* Check to see if all attached Dataflash ICs are functional */
+	if (!(DataflashManager_CheckDataflashOperation()))
+	{
+		/* Update SENSE key with a hardware error condition and return command fail */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR,
+		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	/* Succeed the command and update the bytes transferred counter */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address
+ *  and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual
+ *  reading and writing of the data.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *  \param[in] IsDataRead  Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+                                      const bool IsDataRead)
+{
+	uint32_t BlockAddress;
+	uint16_t TotalBlocks;
+
+	/* Check if the disk is write protected or not */
+	if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY)
+	{
+		/* Block address is invalid, update SENSE key and return command fail */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT,
+		               SCSI_ASENSE_WRITE_PROTECTED,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
+	BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);
+
+	/* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */
+	TotalBlocks  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]);
+
+	/* Check if the block address is outside the maximum allowable value for the LUN */
+	if (BlockAddress >= LUN_MEDIA_BLOCKS)
+	{
+		/* Block address is invalid, update SENSE key and return command fail */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		               SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	#if (TOTAL_LUNS > 1)
+	/* Adjust the given block address to the real media address based on the selected LUN */
+	BlockAddress += ((uint32_t)MSInterfaceInfo->State.CommandBlock.LUN * LUN_MEDIA_BLOCKS);
+	#endif
+
+	/* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
+	if (IsDataRead == DATA_READ)
+	  DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
+	else
+	  DataflashManager_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
+
+	/* Update the bytes transferred counter and succeed the command */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);
+
+	return true;
+}
+
+/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about
+ *  the SCSI device, as well as the device's Write Protect status.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	/* Send an empty header response with the Write Protect flag status */
+	Endpoint_Write_8(0x00);
+	Endpoint_Write_8(0x00);
+	Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00);
+	Endpoint_Write_8(0x00);
+	Endpoint_ClearIN();
+
+	/* Update the bytes transferred counter and succeed the command */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4;
+
+	return true;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h
new file mode 100644
index 000000000..c442e4538
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h
@@ -0,0 +1,89 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for SCSI.c.
+ */
+
+#ifndef _SCSI_H_
+#define _SCSI_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include "../MassStorageKeyboard.h"
+		#include "../Descriptors.h"
+		#include "DataflashManager.h"
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
+		 *  is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
+		 *  the last command failure) in a quick and easy manner.
+		 *
+		 *  \param[in] Key    New SCSI sense key to set the sense code to
+		 *  \param[in] Acode  New SCSI additional sense key to set the additional sense code to
+		 *  \param[in] Aqual  New SCSI additional sense key qualifier to set the additional sense qualifier code to
+		 */
+		#define SCSI_SET_SENSE(Key, Acode, Aqual)  do { SenseData.SenseKey                 = (Key);   \
+		                                                SenseData.AdditionalSenseCode      = (Acode); \
+		                                                SenseData.AdditionalSenseQualifier = (Aqual); } while (0)
+
+		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */
+		#define DATA_READ           true
+
+		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */
+		#define DATA_WRITE          false
+
+		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */
+		#define DEVICE_TYPE_BLOCK   0x00
+
+		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */
+		#define DEVICE_TYPE_CDROM   0x05
+
+	/* Function Prototypes: */
+		bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+
+		#if defined(INCLUDE_FROM_SCSI_C)
+			static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+			static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+			static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+			static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+			static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+			                                      const bool IsDataRead);
+			static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+		#endif
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c
new file mode 100644
index 000000000..3a1b7805e
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c
@@ -0,0 +1,270 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the MassStorageKeyboard demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "MassStorageKeyboard.h"
+
+/** LUFA Mass Storage Class driver interface configuration and state information. This structure is
+ *  passed to all Mass Storage Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_MS_Device_t Disk_MS_Interface =
+	{
+		.Config =
+			{
+				.InterfaceNumber           = INTERFACE_ID_MassStorage,
+				.DataINEndpoint            =
+					{
+						.Address           = MASS_STORAGE_IN_EPADDR,
+						.Size              = MASS_STORAGE_IO_EPSIZE,
+						.Banks             = 1,
+					},
+				.DataOUTEndpoint            =
+					{
+						.Address           = MASS_STORAGE_OUT_EPADDR,
+						.Size              = MASS_STORAGE_IO_EPSIZE,
+						.Banks             = 1,
+					},
+				.TotalLUNs                 = TOTAL_LUNS,
+			},
+	};
+
+/** Buffer to hold the previously generated Keyboard HID report, for comparison purposes inside the HID class driver. */
+static uint8_t PrevKeyboardHIDReportBuffer[sizeof(USB_KeyboardReport_Data_t)];
+
+/** LUFA HID Class driver interface configuration and state information. This structure is
+ *  passed to all HID Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_HID_Device_t Keyboard_HID_Interface =
+ 	{
+		.Config =
+			{
+				.InterfaceNumber              = INTERFACE_ID_Keyboard,
+				.ReportINEndpoint             =
+					{
+						.Address              = KEYBOARD_EPADDR,
+						.Size                 = KEYBOARD_EPSIZE,
+						.Banks                = 1,
+					},
+				.PrevReportINBuffer           = PrevKeyboardHIDReportBuffer,
+				.PrevReportINBufferSize       = sizeof(PrevKeyboardHIDReportBuffer),
+			},
+    };
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		MS_Device_USBTask(&Disk_MS_Interface);
+		HID_Device_USBTask(&Keyboard_HID_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	Joystick_Init();
+	Buttons_Init();
+	Dataflash_Init();
+	USB_Init();
+
+	/* Check if the Dataflash is working, abort if not */
+	if (!(DataflashManager_CheckDataflashOperation()))
+	{
+		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+		for(;;);
+	}
+
+	/* Clear Dataflash sector protections, if enabled */
+	DataflashManager_ResetDataflashProtections();
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Keyboard_HID_Interface);
+	ConfigSuccess &= MS_Device_ConfigureEndpoints(&Disk_MS_Interface);
+
+	USB_Device_EnableSOFEvents();
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	MS_Device_ProcessControlRequest(&Disk_MS_Interface);
+	HID_Device_ProcessControlRequest(&Keyboard_HID_Interface);
+}
+
+/** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface configuration structure being referenced
+ */
+bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	bool CommandSuccess;
+
+	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+	CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo);
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+
+	return CommandSuccess;
+}
+
+/** Event handler for the USB device Start Of Frame event. */
+void EVENT_USB_Device_StartOfFrame(void)
+{
+    HID_Device_MillisecondElapsed(&Keyboard_HID_Interface);
+}
+
+/** HID class driver callback function for the creation of HID reports to the host.
+ *
+ *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
+ *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
+ *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
+ *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
+ *
+ *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
+ */
+bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                         uint8_t* const ReportID,
+                                         const uint8_t ReportType,
+                                         void* ReportData,
+                                         uint16_t* const ReportSize)
+{
+	USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData;
+
+	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
+	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
+
+	KeyboardReport->Modifier = HID_KEYBOARD_MODIFIER_LEFTSHIFT;
+
+	if (JoyStatus_LCL & JOY_UP)
+	  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_A;
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_B;
+
+	if (JoyStatus_LCL & JOY_LEFT)
+	  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_C;
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_D;
+
+	if (JoyStatus_LCL & JOY_PRESS)
+	  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_E;
+
+	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
+	  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_F;
+
+	*ReportSize = sizeof(USB_KeyboardReport_Data_t);
+	return false;
+}
+
+/** HID class driver callback function for the processing of HID reports from the host.
+ *
+ *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in] ReportID    Report ID of the received report from the host
+ *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
+ *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
+ *  \param[in] ReportSize  Size in bytes of the received HID report
+ */
+void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                          const uint8_t ReportID,
+                                          const uint8_t ReportType,
+                                          const void* ReportData,
+                                          const uint16_t ReportSize)
+{
+	uint8_t  LEDMask   = LEDS_NO_LEDS;
+	uint8_t* LEDReport = (uint8_t*)ReportData;
+
+	if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK)
+	  LEDMask |= LEDS_LED1;
+
+	if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK)
+	  LEDMask |= LEDS_LED3;
+
+	if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK)
+	  LEDMask |= LEDS_LED4;
+
+	LEDs_SetAllLEDs(LEDMask);
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h
new file mode 100644
index 000000000..e122a4913
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h
@@ -0,0 +1,100 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for MassStorageKeyboard.c.
+ */
+
+#ifndef _MASS_STORAGE_KEYBOARD_H_
+#define _MASS_STORAGE_KEYBOARD_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <avr/interrupt.h>
+		#include <stdbool.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include "Lib/SCSI.h"
+		#include "Lib/DataflashManager.h"
+		#include "Config/AppConfig.h"
+
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+		#define LEDMASK_USB_BUSY         LEDS_LED2
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+		void EVENT_USB_Device_StartOfFrame(void);
+
+		bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+
+		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                         uint8_t* const ReportID,
+		                                         const uint8_t ReportType,
+		                                         void* ReportData,
+		                                         uint16_t* const ReportSize);
+		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                          const uint8_t ReportID,
+		                                          const uint8_t ReportType,
+		                                          const void* ReportData,
+		                                          const uint16_t ReportSize);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
new file mode 100644
index 000000000..d8b3b31db
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
@@ -0,0 +1,100 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Combined Mass Storage and Keyboard Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Classes:</b></td>
+ *    <td>Mass Storage Device \n
+ *        Human Interface Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclasses:</b></td>
+ *    <td>Bulk-Only Transport \n
+ *        Keyboard Subclass</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Mass Storage Standard \n
+ *        USB Bulk-Only Transport Standard \n
+ *        SCSI Primary Commands Specification \n
+ *        SCSI Block Commands Specification \n
+ *        USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Combined Mass Storage and Keyboard demonstration application. This gives a
+ *  simple reference application for implementing a dual class USB Mass Storage
+ *  and USB HID Keyboard device using the basic USB UFI and HID drivers in all
+ *  modern OSes (i.e. no special drivers required).
+ *
+ *  On start-up the system will automatically enumerate and function as an
+ *  external mass storage device (which may be formatted and used in the same
+ *  manner as commercial USB Mass Storage devices) and a USB keyboard.
+ *
+ *  You will need to format the mass storage drive upon first run of this
+ *  demonstration - as the device acts only as a data block transport between
+ *  the host and the storage media, it does not matter what file system is used,
+ *  as the data interpretation is performed by the host and not the USB device.
+ *
+ *  Keys on the USB keyboard can be pressed by moving the board's Joystick.
+ *
+ *  The USB control endpoint is managed entirely by the library using endpoint
+ *  interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for
+ *  the host to reset the Mass Storage device state during long transfers without
+ *  the need for complicated polling logic.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>TOTAL_LUNS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
+ *        this can be set to any positive non-zero amount.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>DISK_READ_ONLY</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configuration define, indicating if the disk should be write protected or not.</td>
+ *   </tr>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/asf.xml b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/asf.xml
new file mode 100644
index 000000000..3cdb476b2
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/asf.xml
@@ -0,0 +1,70 @@
+<asf xmlversion="1.0">

+	<project caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage_keyboard.example.avr8">

+		<require idref="lufa.demos.device.class.mass_storage_keyboard"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage_keyboard.example.xmega">

+		<require idref="lufa.demos.device.class.mass_storage_keyboard"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.mass_storage_keyboard" caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Mass Storage and Keyboard device demo, implementing a basic USB storage disk using a Dataflash memory IC, and a basic HID keyboard. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Low Level APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="HID Class"/>

+			<keyword value="Mass Storage Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="MassStorageKeyboard.txt"/>

+

+		<build type="c-source" value="MassStorageKeyboard.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="c-source" value="Lib/DataflashManager.c"/>

+		<build type="c-source" value="Lib/SCSI.c"/>

+		<build type="header-file" value="MassStorageKeyboard.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+		<build type="header-file" value="Lib/DataflashManager.h"/>

+		<build type="header-file" value="Lib/SCSI.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

+		<build type="header-file" value="Config/AppConfig.h"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.buttons"/>

+		<require idref="lufa.drivers.board.joystick"/>

+		<require idref="lufa.drivers.board.dataflash"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/doxyfile b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/doxyfile
new file mode 100644
index 000000000..7f0c541ba
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Combined Mass Storage and Keyboard Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
new file mode 100644
index 000000000..4768cfc9b
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = MassStorageKeyboard
+SRC          = $(TARGET).c Descriptors.c Lib/DataflashManager.c Lib/SCSI.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/Mouse/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/Mouse/Config/LUFAConfig.h
new file mode 100644
index 000000000..299d2ec85
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Mouse/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               1
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/Mouse/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/Mouse/Descriptors.c
new file mode 100644
index 000000000..af08f81cf
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Mouse/Descriptors.c
@@ -0,0 +1,221 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** HID class report descriptor. This is a special descriptor constructed with values from the
+ *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
+ *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
+ *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
+ *  more details on HID report descriptors.
+ */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
+{
+	/* Use the HID class driver's standard Mouse report.
+	 *   Min X/Y Axis values: -1
+	 *   Max X/Y Axis values:  1
+	 *   Min physical X/Y Axis values (used to determine resolution): -1
+	 *   Max physical X/Y Axis values (used to determine resolution):  1
+	 *   Buttons: 3
+	 *   Absolute screen coordinates: false
+	 */
+	HID_DESCRIPTOR_MOUSE(-1, 1, -1, 1, 3, false)
+};
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2041,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.HID_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_Mouse,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_BootSubclass,
+			.Protocol               = HID_CSCP_MouseBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID_MouseHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(MouseReport)
+		},
+
+	.HID_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = MOUSE_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = MOUSE_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mouse Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+		case HID_DTYPE_HID:
+			Address = &ConfigurationDescriptor.HID_MouseHID;
+			Size    = sizeof(USB_HID_Descriptor_HID_t);
+			break;
+		case HID_DTYPE_Report:
+			Address = &MouseReport;
+			Size    = sizeof(MouseReport);
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Mouse/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/Mouse/Descriptors.h
new file mode 100644
index 000000000..b3fc96890
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Mouse/Descriptors.h
@@ -0,0 +1,93 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+	/* Macros: */
+		/** Endpoint address of the Mouse HID reporting IN endpoint. */
+		#define MOUSE_EPADDR              (ENDPOINT_DIR_IN | 1)
+
+		/** Size in bytes of the Mouse HID reporting IN endpoint. */
+		#define MOUSE_EPSIZE              8
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Mouse HID Interface
+			USB_Descriptor_Interface_t            HID_Interface;
+			USB_HID_Descriptor_HID_t              HID_MouseHID;
+			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_Mouse = 0, /**< Mouse interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Mouse/Mouse.c b/lib/lufa/Demos/Device/ClassDriver/Mouse/Mouse.c
new file mode 100644
index 000000000..475fb62ad
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Mouse/Mouse.c
@@ -0,0 +1,202 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the Mouse demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "Mouse.h"
+
+/** Buffer to hold the previously generated Mouse HID report, for comparison purposes inside the HID class driver. */
+static uint8_t PrevMouseHIDReportBuffer[sizeof(USB_MouseReport_Data_t)];
+
+/** LUFA HID Class driver interface configuration and state information. This structure is
+ *  passed to all HID Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_HID_Device_t Mouse_HID_Interface =
+	{
+		.Config =
+			{
+				.InterfaceNumber              = INTERFACE_ID_Mouse,
+				.ReportINEndpoint             =
+					{
+						.Address              = MOUSE_EPADDR,
+						.Size                 = MOUSE_EPSIZE,
+						.Banks                = 1,
+					},
+				.PrevReportINBuffer           = PrevMouseHIDReportBuffer,
+				.PrevReportINBufferSize       = sizeof(PrevMouseHIDReportBuffer),
+			},
+	};
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		HID_Device_USBTask(&Mouse_HID_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	Buttons_Init();
+	USB_Init();
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Mouse_HID_Interface);
+
+	USB_Device_EnableSOFEvents();
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	HID_Device_ProcessControlRequest(&Mouse_HID_Interface);
+}
+
+/** Event handler for the USB device Start Of Frame event. */
+void EVENT_USB_Device_StartOfFrame(void)
+{
+	HID_Device_MillisecondElapsed(&Mouse_HID_Interface);
+}
+
+/** HID class driver callback function for the creation of HID reports to the host.
+ *
+ *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
+ *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
+ *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
+ *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
+ *
+ *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
+ */
+bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                         uint8_t* const ReportID,
+                                         const uint8_t ReportType,
+                                         void* ReportData,
+                                         uint16_t* const ReportSize)
+{
+	USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData;
+
+	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
+	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
+
+	if (JoyStatus_LCL & JOY_UP)
+	  MouseReport->Y = -1;
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  MouseReport->Y =  1;
+
+	if (JoyStatus_LCL & JOY_LEFT)
+	  MouseReport->X = -1;
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  MouseReport->X =  1;
+
+	if (JoyStatus_LCL & JOY_PRESS)
+	  MouseReport->Button |= (1 << 0);
+
+	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
+	  MouseReport->Button |= (1 << 1);
+
+	*ReportSize = sizeof(USB_MouseReport_Data_t);
+	return true;
+}
+
+/** HID class driver callback function for the processing of HID reports from the host.
+ *
+ *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in] ReportID    Report ID of the received report from the host
+ *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
+ *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
+ *  \param[in] ReportSize  Size in bytes of the received HID report
+ */
+void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                          const uint8_t ReportID,
+                                          const uint8_t ReportType,
+                                          const void* ReportData,
+                                          const uint16_t ReportSize)
+{
+	// Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Mouse/Mouse.h b/lib/lufa/Demos/Device/ClassDriver/Mouse/Mouse.h
new file mode 100644
index 000000000..62bf47d7b
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Mouse/Mouse.h
@@ -0,0 +1,90 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Mouse.c.
+ */
+
+#ifndef _MOUSE_H_
+#define _MOUSE_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/interrupt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdbool.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+		void EVENT_USB_Device_StartOfFrame(void);
+
+		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                         uint8_t* const ReportID,
+		                                         const uint8_t ReportType,
+		                                         void* ReportData,
+		                                         uint16_t* const ReportSize);
+		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                          const uint8_t ReportID,
+		                                          const uint8_t ReportType,
+		                                          const void* ReportData,
+		                                          const uint16_t ReportSize);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Mouse/Mouse.txt b/lib/lufa/Demos/Device/ClassDriver/Mouse/Mouse.txt
new file mode 100644
index 000000000..dc65b8879
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Mouse/Mouse.txt
@@ -0,0 +1,76 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Mouse Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Human Interface Device (HID)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Mouse Subclass</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Low Speed Mode \n
+ *        Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Mouse demonstration application. This gives a simple reference
+ *  application for implementing a USB Mouse using the basic USB HID
+ *  drivers in all modern OSes (i.e. no special drivers required). It is
+ *  boot protocol compatible, and thus works under compatible BIOS as if
+ *  it was a native mouse (e.g. PS/2).
+ *
+ *  On start-up the system will automatically enumerate and function
+ *  as a mouse when the USB connection to a host is present. To use
+ *  the mouse, move the joystick to move the pointer, and push the
+ *  joystick inwards to simulate a left-button click. The HWB serves as
+ *  the right mouse button.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/Mouse/asf.xml b/lib/lufa/Demos/Device/ClassDriver/Mouse/asf.xml
new file mode 100644
index 000000000..1af0d7667
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Mouse/asf.xml
@@ -0,0 +1,62 @@
+<asf xmlversion="1.0">

+	<project caption="Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mouse.example.avr8">

+		<require idref="lufa.demos.device.class.mouse"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mouse.example.xmega">

+		<require idref="lufa.demos.device.class.mouse"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.mouse" caption="Mouse HID Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Mouse device demo, implementing a basic USB mouse device that can send movement information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="HID Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="Mouse.txt"/>

+

+		<build type="c-source" value="Mouse.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="Mouse.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.buttons"/>

+		<require idref="lufa.drivers.board.joystick"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/Mouse/doxyfile b/lib/lufa/Demos/Device/ClassDriver/Mouse/doxyfile
new file mode 100644
index 000000000..37bc83018
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Mouse/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Mouse Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/Mouse/makefile b/lib/lufa/Demos/Device/ClassDriver/Mouse/makefile
new file mode 100644
index 000000000..0ca85b318
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Mouse/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = Mouse
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Config/AppConfig.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Config/AppConfig.h
new file mode 100644
index 000000000..0e4d1780a
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Config/AppConfig.h
@@ -0,0 +1,60 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define CLIENT_IP_ADDRESS                { 10,     0,    0,    1}
+	#define SERVER_IP_ADDRESS                { 10,     0,    0,    2}
+
+	#define ADAPTER_MAC_ADDRESS              {0x02, 0x00, 0x02, 0x00, 0x02, 0x00}
+	#define SERVER_MAC_ADDRESS               {0x00, 0x01, 0x00, 0x01, 0x00, 0x01}
+
+	#define NO_DECODE_ETHERNET
+	#define NO_DECODE_ARP
+	#define NO_DECODE_IP
+	#define NO_DECODE_ICMP
+	#define NO_DECODE_TCP
+	#define NO_DECODE_UDP
+	#define NO_DECODE_DHCP
+
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Config/LUFAConfig.h
new file mode 100644
index 000000000..cc828a108
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               3
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c
new file mode 100644
index 000000000..e42b31860
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c
@@ -0,0 +1,244 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = CDC_CSCP_CDCClass,
+	.SubClass               = CDC_CSCP_NoSpecificSubclass,
+	.Protocol               = CDC_CSCP_NoSpecificProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x204C,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 2,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.CDC_CCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_VendorSpecificProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC_Functional_Header =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
+
+			.CDCSpecification       = VERSION_BCD(1,1,0),
+		},
+
+	.CDC_Functional_ACM =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
+
+			.Capabilities           = 0x00,
+		},
+
+	.CDC_Functional_Union =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
+
+			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
+			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
+		},
+
+	.CDC_NotificationEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
+			.PollingIntervalMS      = 0xFF
+		},
+
+	.CDC_DCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = CDC_CSCP_CDCDataClass,
+			.SubClass               = CDC_CSCP_NoDataSubclass,
+			.Protocol               = CDC_CSCP_NoDataProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.RNDIS_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_RX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.RNDIS_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_TX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA RNDIS CDC Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h
new file mode 100644
index 000000000..866ccd61a
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h
@@ -0,0 +1,112 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 3)
+
+		/** Endpoint address of the CDC device-to-host data IN endpoint. */
+		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 1)
+
+		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
+		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 2)
+
+		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPSIZE        8
+
+		/** Size in bytes of the CDC data IN and OUT endpoints. */
+		#define CDC_TXRX_EPSIZE                64
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// RNDIS CDC Control Interface
+			USB_Descriptor_Interface_t            CDC_CCI_Interface;
+			USB_CDC_Descriptor_FunctionalHeader_t CDC_Functional_Header;
+			USB_CDC_Descriptor_FunctionalACM_t    CDC_Functional_ACM;
+			USB_CDC_Descriptor_FunctionalUnion_t  CDC_Functional_Union;
+			USB_Descriptor_Endpoint_t             CDC_NotificationEndpoint;
+
+			// RNDIS CDC Data Interface
+			USB_Descriptor_Interface_t            CDC_DCI_Interface;
+			USB_Descriptor_Endpoint_t             RNDIS_DataOutEndpoint;
+			USB_Descriptor_Endpoint_t             RNDIS_DataInEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
+			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/LUFA RNDIS.inf b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/LUFA RNDIS.inf
new file mode 100644
index 000000000..f34e55f99
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/LUFA RNDIS.inf
@@ -0,0 +1,59 @@
+;     Windows LUFA RNDIS Setup File
+; Copyright (c) 2000 Microsoft Corporation
+
+[DefaultInstall]
+CopyINF="LUFA RNDIS.inf"
+
+[Version]
+Signature="$Windows NT$"
+Class=Net
+ClassGuid={4d36e972-e325-11ce-bfc1-08002be10318}
+Provider=%MFGNAME%
+DriverVer=7/1/2012,10.0.0.0
+
+[Manufacturer]
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
+
+[ControlFlags]
+ExcludeFromSelect=*
+
+[DriverInstall]
+Characteristics=0x84 ; NCF_PHYSICAL + NCF_HAS_UI
+BusType=15
+include=netrndis.inf
+needs=Usb_Rndis.ndi
+AddReg=Rndis_AddReg_Vista
+
+[DriverInstall.Services]
+include=netrndis.inf
+needs=Usb_Rndis.ndi.Services
+
+;------------------------------------------------------------------------------
+;  Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID.  Use the format as shown below.
+; Note: One INF file can be used for multiple devices with different VID and PIDs.
+; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
+
+[DeviceList.NTx86]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
+
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
+
+;------------------------------------------------------------------------------
+;  String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+MFGNAME="http://www.lufa-lib.org"
+DESCRIPTION="LUFA USB RNDIS Demo"
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c
new file mode 100644
index 000000000..518ba8c6a
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c
@@ -0,0 +1,87 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Address Resolution Protocol (ARP) packet handling routines. This protocol handles the
+ *  conversion of physical MAC addresses to protocol IP addresses between the host and the
+ *  device.
+ */
+
+#include "ARP.h"
+
+/** Processes an ARP packet inside an Ethernet frame, and writes the appropriate response
+ *  to the output Ethernet frame if the host is requesting the IP or MAC address of the
+ *  virtual server device on the network.
+ *
+ *  \param[in] InDataStart   Pointer to the start of the incoming packet's ARP header
+ *  \param[out] OutDataStart  Pointer to the start of the outgoing packet's ARP header
+ *
+ *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
+ */
+int16_t ARP_ProcessARPPacket(void* InDataStart,
+                             void* OutDataStart)
+{
+	DecodeARPHeader(InDataStart);
+
+	ARP_Header_t* ARPHeaderIN  = (ARP_Header_t*)InDataStart;
+	ARP_Header_t* ARPHeaderOUT = (ARP_Header_t*)OutDataStart;
+
+	/* Ensure that the ARP request is a IPv4 request packet */
+	if ((SwapEndian_16(ARPHeaderIN->ProtocolType) == ETHERTYPE_IPV4) &&
+	    (SwapEndian_16(ARPHeaderIN->Operation) == ARP_OPERATION_REQUEST))
+	{
+		/* If the ARP packet is requesting the MAC or IP of the virtual webserver, return the response */
+		if (IP_COMPARE(&ARPHeaderIN->TPA, &ServerIPAddress) ||
+		    MAC_COMPARE(&ARPHeaderIN->THA, &ServerMACAddress))
+		{
+			/* Fill out the ARP response header */
+			ARPHeaderOUT->HardwareType = ARPHeaderIN->HardwareType;
+			ARPHeaderOUT->ProtocolType = ARPHeaderIN->ProtocolType;
+			ARPHeaderOUT->HLEN         = ARPHeaderIN->HLEN;
+			ARPHeaderOUT->PLEN         = ARPHeaderIN->PLEN;
+			ARPHeaderOUT->Operation    = SwapEndian_16(ARP_OPERATION_REPLY);
+
+			/* Copy over the sender MAC/IP to the target fields for the response */
+			ARPHeaderOUT->THA = ARPHeaderIN->SHA;
+			ARPHeaderOUT->TPA = ARPHeaderIN->SPA;
+
+			/* Copy over the new sender MAC/IP - MAC and IP addresses of the virtual webserver */
+			ARPHeaderOUT->SHA = ServerMACAddress;
+			ARPHeaderOUT->SPA = ServerIPAddress;
+
+			/* Return the size of the response so far */
+			return sizeof(ARP_Header_t);
+		}
+	}
+
+	return NO_RESPONSE;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h
new file mode 100644
index 000000000..e64c38ec5
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h
@@ -0,0 +1,76 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for ARP.c.
+ */
+
+#ifndef _ARP_H_
+#define _ARP_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <string.h>
+
+		#include "EthernetProtocols.h"
+		#include "Ethernet.h"
+		#include "ProtocolDecoders.h"
+
+	/* Macros: */
+		/** ARP header operation constant, indicating a request from a host for an address translation. */
+		#define ARP_OPERATION_REQUEST            1
+
+		/** ARP header operation constant, indicating a reply from a host giving an address translation. */
+		#define ARP_OPERATION_REPLY              2
+
+	/* Type Defines: */
+		/** Type define for an ARP packet inside an Ethernet frame. */
+		typedef struct
+		{
+			uint16_t      HardwareType; /**< Hardware type constant, indicating the hardware used */
+			uint16_t      ProtocolType; /**< Protocol being resolved, usually ETHERTYPE_IPV4 */
+
+			uint8_t       HLEN; /**< Length in bytes of the source/destination hardware addresses */
+			uint8_t       PLEN; /**< Length in bytes of the source/destination protocol addresses */
+			uint16_t      Operation; /**< Type of operation, either ARP_OPERATION_REQUEST or ARP_OPERATION_REPLY */
+
+			MAC_Address_t SHA; /**< Sender's hardware address */
+			IP_Address_t  SPA; /**< Sender's protocol address */
+			MAC_Address_t THA; /**< Target's hardware address */
+			IP_Address_t  TPA; /**< Target's protocol address */
+		} ARP_Header_t;
+
+	/* Function Prototypes: */
+		int16_t ARP_ProcessARPPacket(void* InDataStart,
+		                             void* OutDataStart);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c
new file mode 100644
index 000000000..7adc64836
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c
@@ -0,0 +1,129 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Dynamic Host Configuration Protocol (DHCP) packet handling routines. This protocol
+ *  handles the automatic IP negotiation to the host, so that the host will use the provided
+ *  IP address given to it by the device.
+ */
+
+#include "DHCP.h"
+
+/** Processes a DHCP packet inside an Ethernet frame, and writes the appropriate response
+ *  to the output Ethernet frame if the host is requesting or accepting an IP address.
+ *
+ *  \param[in] IPHeaderInStart     Pointer to the start of the incoming packet's IP header
+ *  \param[in] DHCPHeaderInStart   Pointer to the start of the incoming packet's DHCP header
+ *  \param[out] DHCPHeaderOutStart  Pointer to the start of the outgoing packet's DHCP header
+ *
+ *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
+ */
+int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart,
+                               void* DHCPHeaderInStart,
+                               void* DHCPHeaderOutStart)
+{
+	IP_Header_t*   IPHeaderIN    = (IP_Header_t*)IPHeaderInStart;
+	DHCP_Header_t* DHCPHeaderIN  = (DHCP_Header_t*)DHCPHeaderInStart;
+	DHCP_Header_t* DHCPHeaderOUT = (DHCP_Header_t*)DHCPHeaderOutStart;
+
+	uint8_t* DHCPOptionsINStart  = ((uint8_t*)DHCPHeaderInStart  + sizeof(DHCP_Header_t));
+	uint8_t* DHCPOptionsOUTStart = ((uint8_t*)DHCPHeaderOutStart + sizeof(DHCP_Header_t));
+
+	DecodeDHCPHeader(DHCPHeaderInStart);
+
+	/* Zero out the response DHCP packet, as much of it is legacy and left at 0 */
+	memset(DHCPHeaderOUT, 0, sizeof(DHCP_Header_t));
+
+	/* Fill out the response DHCP packet */
+	DHCPHeaderOUT->HardwareType          = DHCPHeaderIN->HardwareType;
+	DHCPHeaderOUT->Operation             = DHCP_OP_BOOTREPLY;
+	DHCPHeaderOUT->HardwareAddressLength = DHCPHeaderIN->HardwareAddressLength;
+	DHCPHeaderOUT->Hops                  = 0;
+	DHCPHeaderOUT->TransactionID         = DHCPHeaderIN->TransactionID;
+	DHCPHeaderOUT->ElapsedSeconds        = 0;
+	DHCPHeaderOUT->Flags                 = DHCPHeaderIN->Flags;
+	DHCPHeaderOUT->YourIP                = ClientIPAddress;
+	memmove(&DHCPHeaderOUT->ClientHardwareAddress, &DHCPHeaderIN->ClientHardwareAddress, sizeof(MAC_Address_t));
+	DHCPHeaderOUT->Cookie                = SwapEndian_32(DHCP_MAGIC_COOKIE);
+
+	/* Alter the incoming IP packet header so that the corrected IP source and destinations are used - this means that
+	   when the response IP header is generated, it will use the corrected addresses and not the null/broatcast addresses */
+	IPHeaderIN->SourceAddress      = ClientIPAddress;
+	IPHeaderIN->DestinationAddress = ServerIPAddress;
+
+	/* Process the incoming DHCP packet options */
+	while (DHCPOptionsINStart[0] != DHCP_OPTION_END)
+	{
+		/* Find the Message Type DHCP option, to determine the type of DHCP packet */
+		if (DHCPOptionsINStart[0] == DHCP_OPTION_MESSAGETYPE)
+		{
+			if ((DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_DISCOVER) || (DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_REQUEST))
+			{
+				/* Fill out the response DHCP packet options for a DHCP OFFER or ACK response */
+
+				*(DHCPOptionsOUTStart++) = DHCP_OPTION_MESSAGETYPE;
+				*(DHCPOptionsOUTStart++) = 1;
+				*(DHCPOptionsOUTStart++) = (DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_DISCOVER) ? DHCP_MESSAGETYPE_OFFER
+																								: DHCP_MESSAGETYPE_ACK;
+
+				*(DHCPOptionsOUTStart++) = DHCP_OPTION_SUBNETMASK;
+				*(DHCPOptionsOUTStart++) = sizeof(IP_Address_t);
+				*(DHCPOptionsOUTStart++) = 0xFF;
+				*(DHCPOptionsOUTStart++) = 0xFF;
+				*(DHCPOptionsOUTStart++) = 0xFF;
+				*(DHCPOptionsOUTStart++) = 0x00;
+
+				*(DHCPOptionsOUTStart++) = DHCP_OPTION_LEASETIME;
+				*(DHCPOptionsOUTStart++) = sizeof(uint32_t);
+				/* Lease Time 86400s (ONE_DAY) */
+				*(DHCPOptionsOUTStart++) = 0x00;
+				*(DHCPOptionsOUTStart++) = 0x01;
+				*(DHCPOptionsOUTStart++) = 0x51;
+				*(DHCPOptionsOUTStart++) = 0x80;
+
+				*(DHCPOptionsOUTStart++) = DHCP_OPTION_DHCPSERVER;
+				*(DHCPOptionsOUTStart++) = sizeof(IP_Address_t);
+				memcpy(DHCPOptionsOUTStart, &ServerIPAddress, sizeof(IP_Address_t));
+				DHCPOptionsOUTStart     += sizeof(IP_Address_t);
+
+				*(DHCPOptionsOUTStart++) = DHCP_OPTION_END;
+
+				return (sizeof(DHCP_Header_t) + 18 + sizeof(IP_Address_t));
+			}
+		}
+
+		/* Go to the next DHCP option - skip one byte if option is a padding byte, else skip the complete option's size */
+		DHCPOptionsINStart += ((DHCPOptionsINStart[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptionsINStart[1] + 2));
+	}
+
+	return NO_RESPONSE;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h
new file mode 100644
index 000000000..5ef78469e
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h
@@ -0,0 +1,131 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for DHCP.c.
+ */
+
+#ifndef _DHCP_H_
+#define _DHCP_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <string.h>
+
+		#include "EthernetProtocols.h"
+		#include "Ethernet.h"
+		#include "ProtocolDecoders.h"
+
+	/* Macros: */
+		/** DHCP operation constant, indicating a request from a host to a DHCP server. */
+		#define DHCP_OP_BOOTREQUEST       0x01
+
+		/** DHCP operation constant, indicating a reply from a DHCP server to a host. */
+		#define DHCP_OP_BOOTREPLY         0x02
+
+		/** Hardware type constant, indicating Ethernet as a carrier. */
+		#define DHCP_HTYPE_ETHERNET       0x01
+
+		/** Magic boot protocol "cookie", inserted into all BOOTP packets (BOOTP is the carrier of DHCP). */
+		#define DHCP_MAGIC_COOKIE         0x63825363
+
+		/** DHCP option list entry header, indicating that a subnet mask will follow. */
+		#define DHCP_OPTION_SUBNETMASK    1
+
+		/** DHCP option list entry header, indicating that the Lease Time will follow. */
+		#define DHCP_OPTION_LEASETIME     51
+
+		/** DHCP option list entry header, indicating that the DHCP message type constant will follow. */
+		#define DHCP_OPTION_MESSAGETYPE   53
+
+		/** DHCP option list entry header, indicating that the IP address of the DHCP server will follow. */
+		#define DHCP_OPTION_DHCPSERVER    54
+
+		/** DHCP option list entry header, used to pad out option data. */
+		#define DHCP_OPTION_PAD           0
+
+		/** DHCP option list entry header, indicating the end of option data. */
+		#define DHCP_OPTION_END           255
+
+		/** Message type constant, used in the DHCP option data field, requesting that a DHCP server offer an IP address. */
+		#define DHCP_MESSAGETYPE_DISCOVER 1
+
+		/** Message type constant, used in the DHCP option data field, indicating that a DHCP server is offering an IP address. */
+		#define DHCP_MESSAGETYPE_OFFER    2
+
+		/** Message type constant, used in the DHCP option data field, requesting that a DHCP server lease a given IP address. */
+		#define DHCP_MESSAGETYPE_REQUEST  3
+
+		/** Message type constant, used in the DHCP option data field, declining an offered DHCP server IP address lease. */
+		#define DHCP_MESSAGETYPE_DECLINE  4
+
+		/** Message type constant, used in the DHCP option data field, ACKing a host IP lease request. */
+		#define DHCP_MESSAGETYPE_ACK      5
+
+		/** Message type constant, used in the DHCP option data field, NACKing a host IP lease request. */
+		#define DHCP_MESSAGETYPE_NACK     6
+
+		/** Message type constant, used in the DHCP option data field, indicating that a host is releasing a leased IP address. */
+		#define DHCP_MESSAGETYPE_RELEASE  7
+
+	/* Type Defines: */
+		/** Type define for a DHCP packet inside an Ethernet frame. */
+		typedef struct
+		{
+			uint8_t  Operation; /**< DHCP operation, either DHCP_OP_BOOTREQUEST or DHCP_OP_BOOTREPLY */
+			uint8_t  HardwareType; /**< Hardware carrier type constant */
+			uint8_t  HardwareAddressLength;  /**< Length in bytes of a hardware (MAC) address on the network */
+			uint8_t  Hops; /**< Number of hops required to reach the server, unused */
+
+			uint32_t TransactionID; /**< Unique ID of the DHCP packet, for positive matching between sent and received packets */
+
+			uint16_t ElapsedSeconds; /**< Elapsed seconds since the request was made */
+			uint16_t Flags; /**< BOOTP packet flags */
+
+			IP_Address_t ClientIP; /**< Client IP address, if already leased an IP */
+			IP_Address_t YourIP; /**< Client IP address */
+			IP_Address_t NextServerIP; /**< Legacy BOOTP protocol field, unused for DHCP */
+			IP_Address_t RelayAgentIP; /**< Legacy BOOTP protocol field, unused for DHCP */
+
+			uint8_t ClientHardwareAddress[16]; /**< Hardware (MAC) address of the client making a request to the DHCP server */
+			uint8_t ServerHostnameString[64]; /**< Legacy BOOTP protocol field, unused for DHCP */
+			uint8_t BootFileName[128]; /**< Legacy BOOTP protocol field, unused for DHCP */
+
+			uint32_t Cookie; /**< Magic BOOTP protocol cookie to indicate a valid packet */
+		} DHCP_Header_t;
+
+	/* Function Prototypes: */
+		int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart,
+		                               void* DHCPHeaderInStart,
+		                               void* DHCPHeaderOutStart);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c
new file mode 100644
index 000000000..c28fa2336
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c
@@ -0,0 +1,132 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Ethernet frame packet handling routines. This protocol handles the processing of raw Ethernet
+ *  frames sent and received, deferring the processing of sub-packet protocols to the appropriate
+ *  protocol handlers, such as DHCP or ARP.
+ */
+
+#include "Ethernet.h"
+
+/** Constant for convenience when checking against or setting a MAC address to the virtual server MAC address. */
+const MAC_Address_t ServerMACAddress    = {SERVER_MAC_ADDRESS};
+
+/** Constant for convenience when checking against or setting an IP address to the virtual server IP address. */
+const IP_Address_t  ServerIPAddress     = {SERVER_IP_ADDRESS};
+
+/** Constant for convenience when checking against or setting a MAC address to the broadcast MAC address. */
+const MAC_Address_t BroadcastMACAddress = {BROADCAST_MAC_ADDRESS};
+
+/** Constant for convenience when checking against or setting a IP address to the broadcast IP address. */
+const IP_Address_t  BroadcastIPAddress  = {BROADCAST_IP_ADDRESS};
+
+/** Constant for convenience when checking against or setting an IP address to the client (host) IP address. */
+const IP_Address_t  ClientIPAddress     = {CLIENT_IP_ADDRESS};
+
+
+/** Processes an incoming Ethernet frame, and writes the appropriate response to the output Ethernet
+ *  frame buffer if the sub protocol handlers create a valid response.
+ */
+void Ethernet_ProcessPacket(Ethernet_Frame_Info_t* const FrameIN,
+                            Ethernet_Frame_Info_t* const FrameOUT)
+{
+	DecodeEthernetFrameHeader(FrameIN->FrameData);
+
+	/* Cast the incoming Ethernet frame to the Ethernet header type */
+	Ethernet_Frame_Header_t* FrameINHeader  = (Ethernet_Frame_Header_t*)&FrameIN->FrameData;
+	Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT->FrameData;
+
+	int16_t                  RetSize        = NO_RESPONSE;
+
+	/* Ensure frame is addressed to either all (broadcast) or the virtual webserver, and is a type II frame */
+	if ((MAC_COMPARE(&FrameINHeader->Destination, &ServerMACAddress) ||
+	     MAC_COMPARE(&FrameINHeader->Destination, &BroadcastMACAddress)) &&
+		 (SwapEndian_16(FrameIN->FrameLength) > ETHERNET_VER2_MINSIZE))
+	{
+		/* Process the packet depending on its protocol */
+		switch (SwapEndian_16(FrameINHeader->EtherType))
+		{
+			case ETHERTYPE_ARP:
+				RetSize = ARP_ProcessARPPacket(&FrameIN->FrameData[sizeof(Ethernet_Frame_Header_t)],
+				                               &FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t)]);
+				break;
+			case ETHERTYPE_IPV4:
+				RetSize = IP_ProcessIPPacket(FrameIN,
+				                             &FrameIN->FrameData[sizeof(Ethernet_Frame_Header_t)],
+				                             &FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t)]);
+				break;
+		}
+
+		/* Protocol processing routine has filled a response, complete the ethernet frame header */
+		if (RetSize > 0)
+		{
+			/* Fill out the response Ethernet frame header */
+			FrameOUTHeader->Source          = ServerMACAddress;
+			FrameOUTHeader->Destination     = FrameINHeader->Source;
+			FrameOUTHeader->EtherType       = FrameINHeader->EtherType;
+
+			/* Set the response length in the buffer and indicate that a response is ready to be sent */
+			FrameOUT->FrameLength           = (sizeof(Ethernet_Frame_Header_t) + RetSize);
+		}
+	}
+
+	/* Check if the packet was processed */
+	if (RetSize != NO_PROCESS)
+	{
+		/* Clear the frame buffer */
+		FrameIN->FrameLength = 0;
+	}
+}
+
+/** Calculates the appropriate ethernet checksum, consisting of the addition of the one's
+ *  compliment of each word, complimented.
+ *
+ *  \param[in] Data   Pointer to the packet buffer data whose checksum must be calculated
+ *  \param[in] Bytes  Number of bytes in the data buffer to process
+ *
+ *  \return A 16-bit Ethernet checksum value
+ */
+uint16_t Ethernet_Checksum16(void* Data,
+                             uint16_t Bytes)
+{
+	uint16_t* Words    = (uint16_t*)Data;
+	uint32_t  Checksum = 0;
+
+	for (uint16_t CurrWord = 0; CurrWord < (Bytes >> 1); CurrWord++)
+	  Checksum += Words[CurrWord];
+
+	while (Checksum & 0xFFFF0000)
+	  Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16));
+
+	return ~Checksum;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h
new file mode 100644
index 000000000..9bdb71c8f
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h
@@ -0,0 +1,101 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Ethernet.c.
+ */
+
+#ifndef _ETHERNET_H_
+#define _ETHERNET_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <string.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include "Config/AppConfig.h"
+
+		#include "EthernetProtocols.h"
+		#include "ProtocolDecoders.h"
+		#include "ICMP.h"
+		#include "TCP.h"
+		#include "UDP.h"
+		#include "DHCP.h"
+		#include "ARP.h"
+		#include "IP.h"
+
+	/* Macros: */
+		/** Physical MAC address of the network broadcast address. */
+		#define BROADCAST_MAC_ADDRESS            {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}
+
+		/** Performs a comparison between two MAC addresses, indicating if they are identical.
+		 *
+		 *  \param[in] MAC1  First MAC address
+		 *  \param[in] MAC2  Second MAC address
+		 *
+		 *  \return True if the addresses match, \c false otherwise
+		 */
+		#define MAC_COMPARE(MAC1, MAC2)          (memcmp(MAC1, MAC2, sizeof(MAC_Address_t)) == 0)
+
+		/** Minimum size of an Ethernet packet in bytes, to conform to the Ethernet V2 packet standard. */
+		#define ETHERNET_VER2_MINSIZE            0x0600
+
+		/** Return value for all sub protocol handling routines, indicating that no response packet has been generated. */
+		#define NO_RESPONSE                      0
+
+		/** Return value for all sub protocol handling routines, indicating that the packet has not yet been handled. */
+		#define NO_PROCESS                       -1
+
+	/* Type Defines: */
+		/** Type define for an Ethernet frame header. */
+		typedef struct
+		{
+			MAC_Address_t Destination; /**< Physical MAC address of the packet recipient */
+			MAC_Address_t Source; /**< Physics MAC address of the packet source */
+			uint16_t      EtherType; /**< Ethernet packet sub-protocol type, for Ethernet V2 packets */
+		} Ethernet_Frame_Header_t;
+
+	/* External Variables: */
+		extern const MAC_Address_t ServerMACAddress;
+		extern const IP_Address_t  ServerIPAddress;
+		extern const MAC_Address_t BroadcastMACAddress;
+		extern const IP_Address_t  BroadcastIPAddress;
+		extern const IP_Address_t  ClientIPAddress;
+
+	/* Function Prototypes: */
+		void     Ethernet_ProcessPacket(Ethernet_Frame_Info_t* const FrameIN,
+		                                Ethernet_Frame_Info_t* const FrameOUT);
+		uint16_t Ethernet_Checksum16(void* Data,
+		                             uint16_t Bytes);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h
new file mode 100644
index 000000000..51d3f32ee
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h
@@ -0,0 +1,92 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  General Ethernet protocol constants and type defines, for use by
+ *  all network protocol portions of the TCP/IP stack.
+ */
+
+#ifndef _ETHERNET_PROTOCOLS_H_
+#define _ETHERNET_PROTOCOLS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Macros: */
+		#define ETHERTYPE_IPV4                   0x0800
+		#define ETHERTYPE_ARP                    0x0806
+		#define ETHERTYPE_RARP                   0x8035
+		#define ETHERTYPE_APPLETALK              0x809b
+		#define ETHERTYPE_APPLETALKARP           0x80f3
+		#define ETHERTYPE_IEEE8021Q              0x8100
+		#define ETHERTYPE_NOVELLIPX              0x8137
+		#define ETHERTYPE_NOVELL                 0x8138
+		#define ETHERTYPE_IPV6                   0x86DD
+		#define ETHERTYPE_COBRANET               0x8819
+		#define ETHERTYPE_PROVIDERBRIDGING       0x88a8
+		#define ETHERTYPE_MPLSUNICAST            0x8847
+		#define ETHERTYPE_MPLSMULTICAST          0x8848
+		#define ETHERTYPE_PPPoEDISCOVERY         0x8863
+		#define ETHERTYPE_PPPoESESSION           0x8864
+		#define ETHERTYPE_EAPOVERLAN             0x888E
+		#define ETHERTYPE_HYPERSCSI              0x889A
+		#define ETHERTYPE_ATAOVERETHERNET        0x88A2
+		#define ETHERTYPE_ETHERCAT               0x88A4
+		#define ETHERTYPE_SERCOSIII              0x88CD
+		#define ETHERTYPE_CESoE                  0x88D8
+		#define ETHERTYPE_MACSECURITY            0x88E5
+		#define ETHERTYPE_FIBRECHANNEL           0x8906
+		#define ETHERTYPE_QINQ                   0x9100
+		#define ETHERTYPE_VLLT                   0xCAFE
+
+		#define PROTOCOL_ICMP                    1
+		#define PROTOCOL_IGMP                    2
+		#define PROTOCOL_TCP                     6
+		#define PROTOCOL_UDP                     17
+		#define PROTOCOL_OSPF                    89
+		#define PROTOCOL_SCTP                    132
+
+	/* Type Defines: */
+		/** Type define for an Ethernet frame buffer data and information structure. */
+		typedef struct
+		{
+			uint8_t  FrameData[ETHERNET_FRAME_SIZE_MAX]; /**< Ethernet frame contents. */
+			uint16_t FrameLength; /**< Length in bytes of the Ethernet frame stored in the buffer. */
+		} Ethernet_Frame_Info_t;
+
+		/** Type define for a protocol IP address of a device on a network. */
+		typedef struct
+		{
+			uint8_t  Octets[4]; /**< Individual bytes of an IP address */
+		} IP_Address_t;
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c
new file mode 100644
index 000000000..24bc4b53f
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c
@@ -0,0 +1,83 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Internet Control Message Protocol (ICMP) packet handling routines. This protocol handles
+ *  Echo requests from the host, to indicate a successful network connection between the host
+ *  and the virtual server.
+ */
+
+#include "ICMP.h"
+
+/** Processes an ICMP packet inside an Ethernet frame, and writes the appropriate response
+ *  to the output Ethernet frame if the host is issuing a ICMP ECHO request.
+ *
+ *  \param[in] FrameIN        Pointer to the incoming Ethernet frame information structure
+ *  \param[in] InDataStart    Pointer to the start of the incoming packet's ICMP header
+ *  \param[out] OutDataStart  Pointer to the start of the outgoing packet's ICMP header
+ *
+ *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
+ */
+int16_t ICMP_ProcessICMPPacket(Ethernet_Frame_Info_t* const FrameIN,
+                               void* InDataStart,
+                               void* OutDataStart)
+{
+	ICMP_Header_t* ICMPHeaderIN  = (ICMP_Header_t*)InDataStart;
+	ICMP_Header_t* ICMPHeaderOUT = (ICMP_Header_t*)OutDataStart;
+
+	DecodeICMPHeader(InDataStart);
+
+	/* Determine if the ICMP packet is an echo request (ping) */
+	if (ICMPHeaderIN->Type == ICMP_TYPE_ECHOREQUEST)
+	{
+		/* Fill out the ICMP response packet */
+		ICMPHeaderOUT->Type     = ICMP_TYPE_ECHOREPLY;
+		ICMPHeaderOUT->Code     = 0;
+		ICMPHeaderOUT->Checksum = 0;
+		ICMPHeaderOUT->Id       = ICMPHeaderIN->Id;
+		ICMPHeaderOUT->Sequence = ICMPHeaderIN->Sequence;
+
+		intptr_t DataSize = FrameIN->FrameLength - ((((intptr_t)InDataStart + sizeof(ICMP_Header_t)) - (intptr_t)FrameIN->FrameData));
+
+		/* Copy the remaining payload to the response - echo requests should echo back any sent data */
+		memmove(&((uint8_t*)OutDataStart)[sizeof(ICMP_Header_t)],
+		        &((uint8_t*)InDataStart)[sizeof(ICMP_Header_t)],
+			    DataSize);
+
+		ICMPHeaderOUT->Checksum = Ethernet_Checksum16(ICMPHeaderOUT, (DataSize + sizeof(ICMP_Header_t)));
+
+		/* Return the size of the response so far */
+		return (DataSize + sizeof(ICMP_Header_t));
+	}
+
+	return NO_RESPONSE;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h
new file mode 100644
index 000000000..594dfffb2
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h
@@ -0,0 +1,83 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for ICMP.c.
+ */
+
+#ifndef _ICMP_H_
+#define _ICMP_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <string.h>
+
+		#include "EthernetProtocols.h"
+		#include "Ethernet.h"
+		#include "ProtocolDecoders.h"
+
+	/* Macros: */
+		/** ICMP message type constant, indicating an ICMP ECHO Reply message. */
+		#define ICMP_TYPE_ECHOREPLY              0
+
+		/** ICMP message type constant, indicating a packet destination is unreachable. */
+		#define ICMP_TYPE_DESTINATIONUNREACHABLE 3
+
+		/** ICMP message type constant, indicating an ICMP Source Quench message. */
+		#define ICMP_TYPE_SOURCEQUENCH           4
+
+		/** ICMP message type constant, indicating an ICMP Redirect message. */
+		#define ICMP_TYPE_REDIRECTMESSAGE        5
+
+		/** ICMP message type constant, indicating an ICMP ECHO Request message. */
+		#define ICMP_TYPE_ECHOREQUEST            8
+
+		/** ICMP message type constant, indicating an ICMP Time Exceeded message. */
+		#define ICMP_TYPE_TIMEEXCEEDED           11
+
+	/* Type Defines: */
+		/** Type define for an ICMP message header. */
+		typedef struct
+		{
+			uint8_t       Type; /**< ICMP message type, an \c ICMP_TYPE_* constant */
+			uint8_t       Code; /**< ICMP message code, indicating the message value */
+			uint16_t      Checksum; /**< Ethernet checksum of the ICMP message */
+			uint16_t      Id; /**< Id of the ICMP message */
+			uint16_t      Sequence; /**< Sequence number of the ICMP message, to link together message responses */
+		} ICMP_Header_t;
+
+	/* Function Prototypes: */
+		int16_t ICMP_ProcessICMPPacket(Ethernet_Frame_Info_t* const FrameIN,
+		                               void* InDataStart,
+		                               void* OutDataStart);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c
new file mode 100644
index 000000000..05d4ebeee
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c
@@ -0,0 +1,116 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Internet Protocol (IP) packet handling routines. This protocol handles IP packets from the
+ *  host which typically encapsulate other protocols such as ICMP, UDP and TCP.
+ */
+
+#include "IP.h"
+
+/** Processes an IP packet inside an Ethernet frame, and writes the appropriate response
+ *  to the output Ethernet frame if one is created by a sub-protocol handler.
+ *
+ *  \param[in] FrameIN        Pointer to the incoming Ethernet frame information structure
+ *  \param[in] InDataStart    Pointer to the start of the incoming packet's IP header
+ *  \param[out] OutDataStart  Pointer to the start of the outgoing packet's IP header
+ *
+ *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE if no
+ *           response was generated, NO_PROCESS if the packet processing was deferred until the
+ *           next Ethernet packet handler iteration
+ */
+int16_t IP_ProcessIPPacket(Ethernet_Frame_Info_t* const FrameIN,
+                           void* InDataStart,
+                           void* OutDataStart)
+{
+	DecodeIPHeader(InDataStart);
+
+	IP_Header_t* IPHeaderIN  = (IP_Header_t*)InDataStart;
+	IP_Header_t* IPHeaderOUT = (IP_Header_t*)OutDataStart;
+
+	/* Header length is specified in number of longs in the packet header, convert to bytes */
+	uint16_t HeaderLengthBytes = (IPHeaderIN->HeaderLength * sizeof(uint32_t));
+
+	int16_t  RetSize = NO_RESPONSE;
+
+	/* Check to ensure the IP packet is addressed to the virtual webserver's IP or the broadcast IP address */
+	if (!(IP_COMPARE(&IPHeaderIN->DestinationAddress, &ServerIPAddress)) &&
+	    !(IP_COMPARE(&IPHeaderIN->DestinationAddress, &BroadcastIPAddress)))
+	{
+		return NO_RESPONSE;
+	}
+
+	/* Pass off the IP payload to the appropriate protocol processing routine */
+	switch (IPHeaderIN->Protocol)
+	{
+		case PROTOCOL_ICMP:
+			RetSize = ICMP_ProcessICMPPacket(FrameIN,
+			                                 &((uint8_t*)InDataStart)[HeaderLengthBytes],
+			                                 &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]);
+			break;
+		case PROTOCOL_TCP:
+			RetSize = TCP_ProcessTCPPacket(InDataStart,
+			                               &((uint8_t*)InDataStart)[HeaderLengthBytes],
+			                               &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]);
+			break;
+		case PROTOCOL_UDP:
+			RetSize = UDP_ProcessUDPPacket(InDataStart,
+			                               &((uint8_t*)InDataStart)[HeaderLengthBytes],
+			                               &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]);
+			break;
+	}
+
+	/* Check to see if the protocol processing routine has filled out a response */
+	if (RetSize > 0)
+	{
+		/* Fill out the response IP packet header */
+		IPHeaderOUT->TotalLength        = SwapEndian_16(sizeof(IP_Header_t) + RetSize);
+		IPHeaderOUT->TypeOfService      = 0;
+		IPHeaderOUT->HeaderLength       = (sizeof(IP_Header_t) / sizeof(uint32_t));
+		IPHeaderOUT->Version            = 4;
+		IPHeaderOUT->Flags              = 0;
+		IPHeaderOUT->FragmentOffset     = 0;
+		IPHeaderOUT->Identification     = 0;
+		IPHeaderOUT->HeaderChecksum     = 0;
+		IPHeaderOUT->Protocol           = IPHeaderIN->Protocol;
+		IPHeaderOUT->TTL                = DEFAULT_TTL;
+		IPHeaderOUT->SourceAddress      = IPHeaderIN->DestinationAddress;
+		IPHeaderOUT->DestinationAddress = IPHeaderIN->SourceAddress;
+
+		IPHeaderOUT->HeaderChecksum     = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t));
+
+		/* Return the size of the response so far */
+		return (sizeof(IP_Header_t) + RetSize);
+	}
+
+	return RetSize;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h
new file mode 100644
index 000000000..0dd6db8a4
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h
@@ -0,0 +1,93 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for IP.c.
+ */
+
+#ifndef _IP_H_
+#define _IP_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <string.h>
+
+		#include "EthernetProtocols.h"
+		#include "Ethernet.h"
+		#include "ProtocolDecoders.h"
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Protocol IP address of the broadcast address. */
+		#define BROADCAST_IP_ADDRESS             {0xFF, 0xFF, 0xFF, 0xFF}
+
+		/** Default Time To Live (TTL) value for sent packets, indicating the maximum allowable hops until their destination
+		 *  is reached.
+		 */
+		#define DEFAULT_TTL                      128
+
+		/** Performs a comparison between two IP addresses, indicating if they are identical.
+		 *
+		 *  \param[in] IP1  First IP address
+		 *  \param[in] IP2  Second IP address
+		 *
+		 *  \return True if the addresses match, \c false otherwise
+		 */
+		#define IP_COMPARE(IP1, IP2)             (memcmp(IP1, IP2, sizeof(IP_Address_t)) == 0)
+
+	/* Type Defines: */
+		/** Type define of an IP packet header. */
+		typedef struct
+		{
+			unsigned     HeaderLength   : 4; /**< Total length of the packet header, in 4-byte blocks */
+			unsigned     Version        : 4; /**< IP protocol version */
+			uint8_t      TypeOfService; /**< Special service type identifier, indicating delay/throughput/reliability levels */
+			uint16_t     TotalLength; /**< Total length of the IP packet, in bytes */
+
+			uint16_t     Identification; /**< Identification value for identifying fragmented packets */
+			unsigned     FragmentOffset : 13; /**< Offset of this IP fragment */
+			unsigned     Flags          : 3; /**< Fragment flags, to indicate if a packet is fragmented */
+
+			uint8_t      TTL; /**< Maximum allowable number of hops to reach the packet destination */
+			uint8_t      Protocol; /**< Encapsulated protocol type */
+			uint16_t     HeaderChecksum; /**< Ethernet checksum of the IP header */
+
+			IP_Address_t SourceAddress; /**< Source protocol IP address of the packet */
+			IP_Address_t DestinationAddress; /**< Destination protocol IP address of the packet */
+		} IP_Header_t;
+
+	/* Function Prototypes: */
+		int16_t IP_ProcessIPPacket(Ethernet_Frame_Info_t* const FrameIN,
+		                           void* InDataStart,
+		                           void* OutDataStart);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c
new file mode 100644
index 000000000..4c72f81b3
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c
@@ -0,0 +1,277 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/* Protocol decoders for Ethernet, TCP, IP, ICMP and ARP. Each of these routines
+   accepts a header to the appropriate protocol and prints out pertinent information
+   on the packet through the serial port.
+
+   To disable printing of a specific protocol, define the token NO_DECODE_{Protocol}
+   in the project makefile, and pass it to the compiler using the -D switch.
+*/
+
+/** \file
+ *
+ *  Protocol decoding routines, for the plain-text decoding of Ethernet frames for debugging purposes.
+ *  Enabled protocol decoders will print incoming Ethernet frame contents through the USART in a human
+ *  readable format.
+ *
+ *  Note that the USART is a slow transmission medium, and will slow down packet processing considerably.
+ *  Packet decoding routines can be disabled by defining NO_DECODE_{Protocol Name} in the project makefile
+ *  and passing it to the compiler via the -D switch.
+ */
+
+#include "ProtocolDecoders.h"
+
+/** Decodes an Ethernet frame header and prints its contents to through the USART in a human readable format.
+ *
+ *  \param[in] InDataStart  Pointer to the start of an Ethernet frame of data
+ */
+void DecodeEthernetFrameHeader(void* InDataStart)
+{
+	#if !defined(NO_DECODE_ETHERNET)
+	Ethernet_Frame_Header_t* FrameHeader = (Ethernet_Frame_Header_t*)InDataStart;
+
+	printf_P(PSTR("\r\n"));
+
+	printf_P(PSTR("  ETHERNET\r\n"));
+
+	if (!(MAC_COMPARE(&FrameHeader->Destination, &ServerMACAddress)) &&
+	    !(MAC_COMPARE(&FrameHeader->Destination, &BroadcastMACAddress)))
+	{
+		printf_P(PSTR("  + NOT ADDRESSED TO DEVICE\r\n"));
+		return;
+	}
+
+	printf_P(PSTR("  + MAC Source : %02X:%02X:%02X:%02X:%02X:%02X\r\n"), FrameHeader->Source.Octets[0],
+	                                                                     FrameHeader->Source.Octets[1],
+	                                                                     FrameHeader->Source.Octets[2],
+	                                                                     FrameHeader->Source.Octets[3],
+	                                                                     FrameHeader->Source.Octets[4],
+	                                                                     FrameHeader->Source.Octets[5]);
+
+	printf_P(PSTR("  + MAC Dest: %02X:%02X:%02X:%02X:%02X:%02X\r\n"),    FrameHeader->Destination.Octets[0],
+	                                                                     FrameHeader->Destination.Octets[1],
+	                                                                     FrameHeader->Destination.Octets[2],
+	                                                                     FrameHeader->Destination.Octets[3],
+	                                                                     FrameHeader->Destination.Octets[4],
+	                                                                     FrameHeader->Destination.Octets[5]);
+
+	printf_P(PSTR("  + Protocol: 0x%04x\r\n"), SwapEndian_16(FrameHeader->EtherType));
+	#endif
+}
+
+/** Decodes an ARP header and prints its contents to through the USART in a human readable format.
+ *
+ *  \param[in] InDataStart  Pointer to the start of an ARP packet header
+ */
+void DecodeARPHeader(void* InDataStart)
+{
+	#if !defined(NO_DECODE_ARP)
+	ARP_Header_t* ARPHeader = (ARP_Header_t*)InDataStart;
+
+	printf_P(PSTR("   \\\r\n    ARP\r\n"));
+
+	if (!(IP_COMPARE(&ARPHeader->TPA, &ServerIPAddress)) &&
+	    !(MAC_COMPARE(&ARPHeader->THA, &ServerMACAddress)))
+	{
+		printf_P(PSTR("    + NOT ADDRESSED TO DEVICE\r\n"));
+		return;
+	}
+
+	printf_P(PSTR("    + Protocol: %x\r\n"), SwapEndian_16(ARPHeader->ProtocolType));
+	printf_P(PSTR("    + Operation: %u\r\n"), SwapEndian_16(ARPHeader->Operation));
+
+	if (SwapEndian_16(ARPHeader->ProtocolType) == ETHERTYPE_IPV4)
+	{
+		printf_P(PSTR("    + SHA MAC: %02X:%02X:%02X:%02X:%02X:%02X\r\n"), ARPHeader->SHA.Octets[0],
+		                                                                   ARPHeader->SHA.Octets[1],
+		                                                                   ARPHeader->SHA.Octets[2],
+		                                                                   ARPHeader->SHA.Octets[3],
+		                                                                   ARPHeader->SHA.Octets[4],
+		                                                                   ARPHeader->SHA.Octets[5]);
+
+		printf_P(PSTR("    + SPA IP: %u.%u.%u.%u\r\n"), ARPHeader->SPA.Octets[0],
+		                                                ARPHeader->SPA.Octets[1],
+		                                                ARPHeader->SPA.Octets[2],
+		                                                ARPHeader->SPA.Octets[3]);
+
+		printf_P(PSTR("    + THA MAC: %02X:%02X:%02X:%02X:%02X:%02X\r\n"), ARPHeader->THA.Octets[0],
+		                                                                   ARPHeader->THA.Octets[1],
+		                                                                   ARPHeader->THA.Octets[2],
+		                                                                   ARPHeader->THA.Octets[3],
+		                                                                   ARPHeader->THA.Octets[4],
+		                                                                   ARPHeader->THA.Octets[5]);
+
+		printf_P(PSTR("    + TPA IP: %u.%u.%u.%u\r\n"), ARPHeader->TPA.Octets[0],
+		                                                ARPHeader->TPA.Octets[1],
+		                                                ARPHeader->TPA.Octets[2],
+		                                                ARPHeader->TPA.Octets[3]);
+	}
+	#endif
+}
+
+/** Decodes an IP header and prints its contents to through the USART in a human readable format.
+ *
+ *  \param[in] InDataStart  Pointer to the start of an IP packet header
+ */
+void DecodeIPHeader(void* InDataStart)
+{
+	#if !defined(NO_DECODE_IP)
+	IP_Header_t* IPHeader  = (IP_Header_t*)InDataStart;
+
+	uint16_t HeaderLengthBytes = (IPHeader->HeaderLength * sizeof(uint32_t));
+
+	printf_P(PSTR("   \\\r\n    IP\r\n"));
+
+	if (!(IP_COMPARE(&IPHeader->DestinationAddress, &ServerIPAddress)))
+	{
+		printf_P(PSTR("    + NOT ADDRESSED TO DEVICE\r\n"));
+		return;
+	}
+
+	printf_P(PSTR("    + Header Length: %u Bytes\r\n"), HeaderLengthBytes);
+	printf_P(PSTR("    + Packet Version: %u\r\n"), IPHeader->Version);
+	printf_P(PSTR("    + Total Length: %u\r\n"), SwapEndian_16(IPHeader->TotalLength));
+
+	printf_P(PSTR("    + Protocol: %u\r\n"), IPHeader->Protocol);
+	printf_P(PSTR("    + TTL: %u\r\n"), IPHeader->TTL);
+
+	printf_P(PSTR("    + IP Src: %u.%u.%u.%u\r\n"), IPHeader->SourceAddress.Octets[0],
+	                                                IPHeader->SourceAddress.Octets[1],
+	                                                IPHeader->SourceAddress.Octets[2],
+	                                                IPHeader->SourceAddress.Octets[3]);
+
+	printf_P(PSTR("    + IP Dst: %u.%u.%u.%u\r\n"), IPHeader->DestinationAddress.Octets[0],
+	                                                IPHeader->DestinationAddress.Octets[1],
+	                                                IPHeader->DestinationAddress.Octets[2],
+	                                                IPHeader->DestinationAddress.Octets[3]);
+	#endif
+}
+
+/** Decodes an ICMP header and prints its contents to through the USART in a human readable format.
+ *
+ *  \param[in] InDataStart  Pointer to the start of an ICMP packet header
+ */
+void DecodeICMPHeader(void* InDataStart)
+{
+	#if !defined(NO_DECODE_ICMP)
+	ICMP_Header_t* ICMPHeader  = (ICMP_Header_t*)InDataStart;
+
+	printf_P(PSTR("    \\\r\n     ICMP\r\n"));
+
+	printf_P(PSTR("     + Type: %u\r\n"), ICMPHeader->Type);
+	printf_P(PSTR("     + Code: %u\r\n"), ICMPHeader->Code);
+	#endif
+}
+
+/** Decodes a TCP header and prints its contents to through the USART in a human readable format.
+ *
+ *  \param[in] InDataStart  Pointer to the start of a TCP packet header
+ */
+void DecodeTCPHeader(void* InDataStart)
+{
+	#if !defined(NO_DECODE_TCP)
+	TCP_Header_t* TCPHeader  = (TCP_Header_t*)InDataStart;
+
+	uint16_t               HeaderLengthBytes = (TCPHeader->DataOffset * sizeof(uint32_t));
+
+	printf_P(PSTR("    \\\r\n     TCP\r\n"));
+
+	printf_P(PSTR("     + Header Length: %u Bytes\r\n"), HeaderLengthBytes);
+
+	printf_P(PSTR("     + Source Port: %u\r\n"), SwapEndian_16(TCPHeader->SourcePort));
+	printf_P(PSTR("     + Destination Port: %u\r\n"), SwapEndian_16(TCPHeader->DestinationPort));
+
+	printf_P(PSTR("     + Sequence Number: %lu\r\n"), SwapEndian_32(TCPHeader->SequenceNumber));
+	printf_P(PSTR("     + Acknowledgment Number: %lu\r\n"), SwapEndian_32(TCPHeader->AcknowledgmentNumber));
+
+	printf_P(PSTR("     + Flags: 0x%02X\r\n"), TCPHeader->Flags);
+
+	if (TCP_GetPortState(TCPHeader->DestinationPort) == TCP_Port_Closed)
+	  printf_P(PSTR("     + NOT LISTENING ON DESTINATION PORT\r\n"));
+	#endif
+}
+
+/** Decodes an UDP header and prints its contents to through the USART in a human readable format.
+ *
+ *  \param[in] InDataStart  Pointer to the start of a UDP packet header
+ */
+void DecodeUDPHeader(void* InDataStart)
+{
+	#if !defined(NO_DECODE_UDP)
+	UDP_Header_t* UDPHeader = (UDP_Header_t*)InDataStart;
+
+	printf_P(PSTR("    \\\r\n     UDP\r\n"));
+
+	printf_P(PSTR("     + Source Port: %u\r\n"), SwapEndian_16(UDPHeader->SourcePort));
+	printf_P(PSTR("     + Destination Port: %u\r\n"), SwapEndian_16(UDPHeader->DestinationPort));
+
+	printf_P(PSTR("     + Data Length: %d\r\n"), SwapEndian_16(UDPHeader->Length));
+	#endif
+}
+
+/** Decodes an DHCP header and prints its contents to through the USART in a human readable format.
+ *
+ *  \param[in] InDataStart  Pointer to the start of a DHCP packet header
+ */
+void DecodeDHCPHeader(void* InDataStart)
+{
+	#if !defined(NO_DECODE_DHCP)
+	uint8_t* DHCPOptions = ((uint8_t*)InDataStart + sizeof(DHCP_Header_t));
+
+	printf_P(PSTR("     \\\r\n      DHCP\r\n"));
+
+	while (DHCPOptions[0] != DHCP_OPTION_END)
+	{
+		if (DHCPOptions[0] == DHCP_OPTION_MESSAGETYPE)
+		{
+			switch (DHCPOptions[2])
+			{
+				case DHCP_MESSAGETYPE_DISCOVER:
+					printf_P(PSTR("      + DISCOVER\r\n"));
+					break;
+				case DHCP_MESSAGETYPE_REQUEST:
+					printf_P(PSTR("      + REQUEST\r\n"));
+					break;
+				case DHCP_MESSAGETYPE_RELEASE:
+					printf_P(PSTR("      + RELEASE\r\n"));
+					break;
+				case DHCP_MESSAGETYPE_DECLINE:
+					printf_P(PSTR("      + DECLINE\r\n"));
+					break;
+			}
+		}
+
+		DHCPOptions += ((DHCPOptions[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptions[1] + 2));
+	}
+
+	#endif
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h
new file mode 100644
index 000000000..77a50f02f
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h
@@ -0,0 +1,60 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for ProtocolDecoders.c.
+ */
+
+#ifndef _PROTOCOL_DECODERS_H_
+#define _PROTOCOL_DECODERS_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/pgmspace.h>
+		#include <stdio.h>
+
+		#include <LUFA/Drivers/Peripheral/Serial.h>
+
+		#include "EthernetProtocols.h"
+		#include "Ethernet.h"
+		#include "Config/AppConfig.h"
+
+	/* Function Prototypes: */
+		void DecodeEthernetFrameHeader(void* InDataStart);
+		void DecodeARPHeader(void* InDataStart);
+		void DecodeIPHeader(void* InDataStart);
+		void DecodeICMPHeader(void* InDataStart);
+		void DecodeTCPHeader(void* InDataStart);
+		void DecodeUDPHeader(void* InDataStart);
+		void DecodeDHCPHeader(void* InDataStart);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c
new file mode 100644
index 000000000..dcc527aa9
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c
@@ -0,0 +1,632 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Transmission Control Protocol (TCP) packet handling routines. This protocol handles the reliable in-order transmission
+ *  and reception of packets to and from devices on a network, to "ports" on the device. It is used in situations where data
+ *  delivery must be reliable and correct, e.g. HTTP, TELNET and most other non-streaming protocols.
+ */
+
+#define  INCLUDE_FROM_TCP_C
+#include "TCP.h"
+
+/** Port state table array. This contains the current status of TCP ports in the device. To save on space, only open ports are
+ *  stored - closed ports may be overwritten at any time, and the system will assume any ports not present in the array are closed. This
+ *  allows for MAX_OPEN_TCP_PORTS to be less than the number of ports used by the application if desired.
+ */
+TCP_PortState_t        PortStateTable[MAX_OPEN_TCP_PORTS];
+
+/** Connection state table array. This contains the current status of TCP connections in the device. To save on space, only active
+ *  (non-closed) connections are stored - closed connections may be overwritten at any time, and the system will assume any connections
+ *  not present in the array are closed.
+ */
+TCP_ConnectionState_t  ConnectionStateTable[MAX_TCP_CONNECTIONS];
+
+
+/** Task to handle the calling of each registered application's callback function, to process and generate TCP packets at the application
+ *  level. If an application produces a response, this task constructs the appropriate Ethernet frame and places it into the Ethernet OUT
+ *  buffer for later transmission.
+ */
+void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo,
+		         Ethernet_Frame_Info_t* const FrameOUT)
+{
+	/* Run each application in sequence, to process incoming and generate outgoing packets */
+	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
+	{
+		/* Find the corresponding port entry in the port table */
+		for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
+		{
+			/* Run the application handler for the port */
+			if ((PortStateTable[PTableEntry].Port  == ConnectionStateTable[CSTableEntry].Port) &&
+			    (PortStateTable[PTableEntry].State == TCP_Port_Open))
+			{
+				PortStateTable[PTableEntry].ApplicationHandler(&ConnectionStateTable[CSTableEntry],
+				                                               &ConnectionStateTable[CSTableEntry].Info.Buffer);
+			}
+		}
+	}
+
+	/* Bail out early if there is already a frame waiting to be sent in the Ethernet OUT buffer */
+	if (FrameOUT->FrameLength)
+	  return;
+
+	/* Send response packets from each application as the TCP packet buffers are filled by the applications */
+	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
+	{
+		/* For each completely received packet, pass it along to the listening application */
+		if ((ConnectionStateTable[CSTableEntry].Info.Buffer.Direction == TCP_PACKETDIR_OUT) &&
+		    (ConnectionStateTable[CSTableEntry].Info.Buffer.Ready))
+		{
+			Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT->FrameData;
+			IP_Header_t*             IPHeaderOUT    = (IP_Header_t*)&FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t)];
+			TCP_Header_t*            TCPHeaderOUT   = (TCP_Header_t*)&FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t) +
+			                                                                              sizeof(IP_Header_t)];
+			void*                    TCPDataOUT     = &FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t) +
+			                                                               sizeof(IP_Header_t) +
+			                                                               sizeof(TCP_Header_t)];
+
+			uint16_t PacketSize = ConnectionStateTable[CSTableEntry].Info.Buffer.Length;
+
+			/* Fill out the TCP data */
+			TCPHeaderOUT->SourcePort           = ConnectionStateTable[CSTableEntry].Port;
+			TCPHeaderOUT->DestinationPort      = ConnectionStateTable[CSTableEntry].RemotePort;
+			TCPHeaderOUT->SequenceNumber       = SwapEndian_32(ConnectionStateTable[CSTableEntry].Info.SequenceNumberOut);
+			TCPHeaderOUT->AcknowledgmentNumber = SwapEndian_32(ConnectionStateTable[CSTableEntry].Info.SequenceNumberIn);
+			TCPHeaderOUT->DataOffset           = (sizeof(TCP_Header_t) / sizeof(uint32_t));
+			TCPHeaderOUT->WindowSize           = SwapEndian_16(TCP_WINDOW_SIZE);
+
+			TCPHeaderOUT->Flags                = TCP_FLAG_ACK;
+			TCPHeaderOUT->UrgentPointer        = 0;
+			TCPHeaderOUT->Checksum             = 0;
+			TCPHeaderOUT->Reserved             = 0;
+
+			memcpy(TCPDataOUT, ConnectionStateTable[CSTableEntry].Info.Buffer.Data, PacketSize);
+
+			ConnectionStateTable[CSTableEntry].Info.SequenceNumberOut += PacketSize;
+
+			TCPHeaderOUT->Checksum             = TCP_Checksum16(TCPHeaderOUT, &ServerIPAddress,
+			                                                    &ConnectionStateTable[CSTableEntry].RemoteAddress,
+			                                                    (sizeof(TCP_Header_t) + PacketSize));
+
+			PacketSize += sizeof(TCP_Header_t);
+
+			/* Fill out the response IP header */
+			IPHeaderOUT->TotalLength        = SwapEndian_16(sizeof(IP_Header_t) + PacketSize);
+			IPHeaderOUT->TypeOfService      = 0;
+			IPHeaderOUT->HeaderLength       = (sizeof(IP_Header_t) / sizeof(uint32_t));
+			IPHeaderOUT->Version            = 4;
+			IPHeaderOUT->Flags              = 0;
+			IPHeaderOUT->FragmentOffset     = 0;
+			IPHeaderOUT->Identification     = 0;
+			IPHeaderOUT->HeaderChecksum     = 0;
+			IPHeaderOUT->Protocol           = PROTOCOL_TCP;
+			IPHeaderOUT->TTL                = DEFAULT_TTL;
+			IPHeaderOUT->SourceAddress      = ServerIPAddress;
+			IPHeaderOUT->DestinationAddress = ConnectionStateTable[CSTableEntry].RemoteAddress;
+
+			IPHeaderOUT->HeaderChecksum     = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t));
+
+			PacketSize += sizeof(IP_Header_t);
+
+			/* Fill out the response Ethernet frame header */
+			FrameOUTHeader->Source          = ServerMACAddress;
+			FrameOUTHeader->Destination     = (MAC_Address_t){{0x02, 0x00, 0x02, 0x00, 0x02, 0x00}};
+			FrameOUTHeader->EtherType       = SwapEndian_16(ETHERTYPE_IPV4);
+
+			PacketSize += sizeof(Ethernet_Frame_Header_t);
+
+			/* Set the response length in the buffer and indicate that a response is ready to be sent */
+			FrameOUT->FrameLength           = PacketSize;
+
+			ConnectionStateTable[CSTableEntry].Info.Buffer.Ready = false;
+
+			break;
+		}
+	}
+}
+
+/** Initializes the TCP protocol handler, clearing the port and connection state tables. This must be called before TCP packets are
+ *  processed.
+ */
+void TCP_Init(void)
+{
+	/* Initialize the port state table with all CLOSED entries */
+	for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
+	  PortStateTable[PTableEntry].State = TCP_Port_Closed;
+
+	/* Initialize the connection table with all CLOSED entries */
+	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
+	  ConnectionStateTable[CSTableEntry].State = TCP_Connection_Closed;
+}
+
+/** Sets the state and callback handler of the given port, specified in big endian to the given state.
+ *
+ *  \param[in] Port     Port whose state and callback function to set, specified in big endian
+ *  \param[in] State    New state of the port, a value from the \ref TCP_PortStates_t enum
+ *  \param[in] Handler  Application callback handler for the port
+ *
+ *  \return Boolean \c true if the port state was set, \c false otherwise (no more space in the port state table)
+ */
+bool TCP_SetPortState(const uint16_t Port,
+                      const uint8_t State,
+                      void (*Handler)(TCP_ConnectionState_t*, TCP_ConnectionBuffer_t*))
+{
+	/* Note, Port number should be specified in BIG endian to simplify network code */
+
+	/* Check to see if the port entry is already in the port state table */
+	for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
+	{
+		/* Find existing entry for the port in the table, update it if found */
+		if (PortStateTable[PTableEntry].Port == Port)
+		{
+			PortStateTable[PTableEntry].State = State;
+			PortStateTable[PTableEntry].ApplicationHandler = Handler;
+			return true;
+		}
+	}
+
+	/* Check if trying to open the port -- if so we need to find an unused (closed) entry and replace it */
+	if (State == TCP_Port_Open)
+	{
+		for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
+		{
+			/* Find a closed port entry in the table, change it to the given port and state */
+			if (PortStateTable[PTableEntry].State == TCP_Port_Closed)
+			{
+				PortStateTable[PTableEntry].Port  = Port;
+				PortStateTable[PTableEntry].State = State;
+				PortStateTable[PTableEntry].ApplicationHandler = Handler;
+				return true;
+			}
+		}
+
+		/* Port not in table and no room to add it, return failure */
+		return false;
+	}
+	else
+	{
+		/* Port not in table but trying to close it, so operation successful */
+		return true;
+	}
+}
+
+/** Retrieves the current state of a given TCP port, specified in big endian.
+ *
+ *  \param[in] Port  TCP port whose state is to be retrieved, given in big-endian
+ *
+ *  \return A value from the \ref TCP_PortStates_t enum
+ */
+uint8_t TCP_GetPortState(const uint16_t Port)
+{
+	/* Note, Port number should be specified in BIG endian to simplify network code */
+
+	for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
+	{
+		/* Find existing entry for the port in the table, return the port status if found */
+		if (PortStateTable[PTableEntry].Port == Port)
+		  return PortStateTable[PTableEntry].State;
+	}
+
+	/* Port not in table, assume closed */
+	return TCP_Port_Closed;
+}
+
+/** Sets the connection state of the given port, remote address and remote port to the given TCP connection state. If the
+ *  connection exists in the connection state table it is updated, otherwise it is created if possible.
+ *
+ *  \param[in] Port           TCP port of the connection on the device, specified in big endian
+ *  \param[in] RemoteAddress  Remote protocol IP address of the connected device
+ *  \param[in] RemotePort     TCP port of the remote device in the connection, specified in big endian
+ *  \param[in] State          TCP connection state, a value from the \ref TCP_ConnectionStates_t enum
+ *
+ *  \return Boolean \c true if the connection was updated or created, \c false otherwise (no more space in the connection state table)
+ */
+bool TCP_SetConnectionState(const uint16_t Port,
+                            const IP_Address_t* RemoteAddress,
+                            const uint16_t RemotePort,
+                            const uint8_t State)
+{
+	/* Note, Port number should be specified in BIG endian to simplify network code */
+
+	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
+	{
+		/* Find port entry in the table */
+		if ((ConnectionStateTable[CSTableEntry].Port == Port) &&
+		     IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) &&
+			 ConnectionStateTable[CSTableEntry].RemotePort == RemotePort)
+		{
+			ConnectionStateTable[CSTableEntry].State = State;
+			return true;
+		}
+	}
+
+	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
+	{
+		/* Find empty entry in the table */
+		if (ConnectionStateTable[CSTableEntry].State == TCP_Connection_Closed)
+		{
+			ConnectionStateTable[CSTableEntry].Port          = Port;
+			ConnectionStateTable[CSTableEntry].RemoteAddress = *RemoteAddress;
+			ConnectionStateTable[CSTableEntry].RemotePort    = RemotePort;
+			ConnectionStateTable[CSTableEntry].State         = State;
+			return true;
+		}
+	}
+
+	return false;
+}
+
+/** Retrieves the current state of a given TCP connection to a host.
+ *
+ *  \param[in] Port           TCP port on the device in the connection, specified in big endian
+ *  \param[in] RemoteAddress  Remote protocol IP address of the connected host
+ *  \param[in] RemotePort     Remote TCP port of the connected host, specified in big endian
+ *
+ *  \return A value from the \ref TCP_ConnectionStates_t enum
+ */
+uint8_t TCP_GetConnectionState(const uint16_t Port,
+                               const IP_Address_t* RemoteAddress,
+                               const uint16_t RemotePort)
+{
+	/* Note, Port number should be specified in BIG endian to simplify network code */
+
+	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
+	{
+		/* Find port entry in the table */
+		if ((ConnectionStateTable[CSTableEntry].Port == Port) &&
+		     IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) &&
+			 ConnectionStateTable[CSTableEntry].RemotePort == RemotePort)
+
+		{
+			return ConnectionStateTable[CSTableEntry].State;
+		}
+	}
+
+	return TCP_Connection_Closed;
+}
+
+/** Retrieves the connection info structure of a given connection to a host.
+ *
+ *  \param[in] Port           TCP port on the device in the connection, specified in big endian
+ *  \param[in] RemoteAddress  Remote protocol IP address of the connected host
+ *  \param[in] RemotePort     Remote TCP port of the connected host, specified in big endian
+ *
+ *  \return ConnectionInfo structure of the connection if found, NULL otherwise
+ */
+TCP_ConnectionInfo_t* TCP_GetConnectionInfo(const uint16_t Port,
+                                            const IP_Address_t* RemoteAddress,
+                                            const uint16_t RemotePort)
+{
+	/* Note, Port number should be specified in BIG endian to simplify network code */
+
+	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
+	{
+		/* Find port entry in the table */
+		if ((ConnectionStateTable[CSTableEntry].Port == Port) &&
+		     IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) &&
+			 ConnectionStateTable[CSTableEntry].RemotePort == RemotePort)
+		{
+			return &ConnectionStateTable[CSTableEntry].Info;
+		}
+	}
+
+	return NULL;
+}
+
+/** Processes a TCP packet inside an Ethernet frame, and writes the appropriate response
+ *  to the output Ethernet frame if one is created by a application handler.
+ *
+ *  \param[in] IPHeaderInStart     Pointer to the start of the incoming packet's IP header
+ *  \param[in] TCPHeaderInStart    Pointer to the start of the incoming packet's TCP header
+ *  \param[out] TCPHeaderOutStart  Pointer to the start of the outgoing packet's TCP header
+ *
+ *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE if no
+ *           response was generated, NO_PROCESS if the packet processing was deferred until the
+ *           next Ethernet packet handler iteration
+ */
+int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart,
+                             void* TCPHeaderInStart,
+                             void* TCPHeaderOutStart)
+{
+	IP_Header_t*  IPHeaderIN   = (IP_Header_t*)IPHeaderInStart;
+	TCP_Header_t* TCPHeaderIN  = (TCP_Header_t*)TCPHeaderInStart;
+	TCP_Header_t* TCPHeaderOUT = (TCP_Header_t*)TCPHeaderOutStart;
+
+	TCP_ConnectionInfo_t* ConnectionInfo;
+
+	DecodeTCPHeader(TCPHeaderInStart);
+
+	bool PacketResponse = false;
+
+	/* Check if the destination port is open and allows incoming connections */
+	if (TCP_GetPortState(TCPHeaderIN->DestinationPort) == TCP_Port_Open)
+	{
+		/* Detect SYN from host to start a connection */
+		if (TCPHeaderIN->Flags & TCP_FLAG_SYN)
+		  TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Listen);
+
+		/* Detect RST from host to abort existing connection */
+		if (TCPHeaderIN->Flags & TCP_FLAG_RST)
+		{
+			if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+			                           TCPHeaderIN->SourcePort, TCP_Connection_Closed))
+			{
+				TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK);
+				PacketResponse = true;
+			}
+		}
+		else
+		{
+			/* Process the incoming TCP packet based on the current connection state for the sender and port */
+			switch (TCP_GetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort))
+			{
+				case TCP_Connection_Listen:
+					if (TCPHeaderIN->Flags == TCP_FLAG_SYN)
+					{
+						/* SYN connection starts a connection with a peer */
+						if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+						                           TCPHeaderIN->SourcePort, TCP_Connection_SYNReceived))
+						{
+							TCPHeaderOUT->Flags = (TCP_FLAG_SYN | TCP_FLAG_ACK);
+
+							ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort);
+
+							ConnectionInfo->SequenceNumberIn  = (SwapEndian_32(TCPHeaderIN->SequenceNumber) + 1);
+							ConnectionInfo->SequenceNumberOut = 0;
+							ConnectionInfo->Buffer.InUse      = false;
+						}
+						else
+						{
+							TCPHeaderOUT->Flags = TCP_FLAG_RST;
+						}
+
+						PacketResponse      = true;
+					}
+
+					break;
+				case TCP_Connection_SYNReceived:
+					if (TCPHeaderIN->Flags == TCP_FLAG_ACK)
+					{
+						/* ACK during the connection process completes the connection to a peer */
+
+						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+											   TCPHeaderIN->SourcePort, TCP_Connection_Established);
+
+						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+															   TCPHeaderIN->SourcePort);
+
+						ConnectionInfo->SequenceNumberOut++;
+					}
+
+					break;
+				case TCP_Connection_Established:
+					if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK))
+					{
+						/* FIN ACK when connected to a peer starts the finalization process */
+
+						TCPHeaderOUT->Flags = (TCP_FLAG_FIN | TCP_FLAG_ACK);
+						PacketResponse      = true;
+
+						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+											   TCPHeaderIN->SourcePort, TCP_Connection_CloseWait);
+
+						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+															   TCPHeaderIN->SourcePort);
+
+						ConnectionInfo->SequenceNumberIn++;
+						ConnectionInfo->SequenceNumberOut++;
+					}
+					else if ((TCPHeaderIN->Flags == TCP_FLAG_ACK) || (TCPHeaderIN->Flags == (TCP_FLAG_ACK | TCP_FLAG_PSH)))
+					{
+						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+															   TCPHeaderIN->SourcePort);
+
+						/* Check if the buffer is currently in use either by a buffered data to send, or receive */
+						if ((ConnectionInfo->Buffer.InUse == false) && (ConnectionInfo->Buffer.Ready == false))
+						{
+							ConnectionInfo->Buffer.Direction = TCP_PACKETDIR_IN;
+							ConnectionInfo->Buffer.InUse     = true;
+							ConnectionInfo->Buffer.Length    = 0;
+						}
+
+						/* Check if the buffer has been claimed by us to read in data from the peer */
+						if ((ConnectionInfo->Buffer.Direction == TCP_PACKETDIR_IN) &&
+							(ConnectionInfo->Buffer.Length != TCP_WINDOW_SIZE))
+						{
+							uint16_t IPOffset   = (IPHeaderIN->HeaderLength * sizeof(uint32_t));
+							uint16_t TCPOffset  = (TCPHeaderIN->DataOffset * sizeof(uint32_t));
+							uint16_t DataLength = (SwapEndian_16(IPHeaderIN->TotalLength) - IPOffset - TCPOffset);
+
+							/* Copy the packet data into the buffer */
+							memcpy(&ConnectionInfo->Buffer.Data[ConnectionInfo->Buffer.Length],
+								   &((uint8_t*)TCPHeaderInStart)[TCPOffset],
+								   DataLength);
+
+							ConnectionInfo->SequenceNumberIn += DataLength;
+							ConnectionInfo->Buffer.Length    += DataLength;
+
+							/* Check if the buffer is full or if the PSH flag is set, if so indicate buffer ready */
+							if ((!(TCP_WINDOW_SIZE - ConnectionInfo->Buffer.Length)) || (TCPHeaderIN->Flags & TCP_FLAG_PSH))
+							{
+								ConnectionInfo->Buffer.InUse = false;
+								ConnectionInfo->Buffer.Ready = true;
+
+								TCPHeaderOUT->Flags = TCP_FLAG_ACK;
+								PacketResponse      = true;
+							}
+						}
+						else
+						{
+							/* Buffer is currently in use by the application, defer processing of the incoming packet */
+							return NO_PROCESS;
+						}
+					}
+
+					break;
+				case TCP_Connection_Closing:
+						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+															   TCPHeaderIN->SourcePort);
+
+						TCPHeaderOUT->Flags = (TCP_FLAG_ACK | TCP_FLAG_FIN);
+						PacketResponse      = true;
+
+						ConnectionInfo->Buffer.InUse = false;
+
+						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+											   TCPHeaderIN->SourcePort, TCP_Connection_FINWait1);
+
+					break;
+				case TCP_Connection_FINWait1:
+					if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK))
+					{
+						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+															   TCPHeaderIN->SourcePort);
+
+						TCPHeaderOUT->Flags = TCP_FLAG_ACK;
+						PacketResponse      = true;
+
+						ConnectionInfo->SequenceNumberIn++;
+						ConnectionInfo->SequenceNumberOut++;
+
+						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+											   TCPHeaderIN->SourcePort, TCP_Connection_Closed);
+					}
+					else if (TCPHeaderIN->Flags == TCP_FLAG_ACK)
+					{
+						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+											   TCPHeaderIN->SourcePort, TCP_Connection_FINWait2);
+					}
+
+					break;
+				case TCP_Connection_FINWait2:
+					if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK))
+					{
+						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+															   TCPHeaderIN->SourcePort);
+
+						TCPHeaderOUT->Flags = TCP_FLAG_ACK;
+						PacketResponse      = true;
+
+						ConnectionInfo->SequenceNumberIn++;
+						ConnectionInfo->SequenceNumberOut++;
+
+						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+											   TCPHeaderIN->SourcePort, TCP_Connection_Closed);
+					}
+
+					break;
+				case TCP_Connection_CloseWait:
+					if (TCPHeaderIN->Flags == TCP_FLAG_ACK)
+					{
+						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+											   TCPHeaderIN->SourcePort, TCP_Connection_Closed);
+					}
+
+					break;
+			}
+		}
+	}
+	else
+	{
+		/* Port is not open, indicate via a RST/ACK response to the sender */
+		TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK);
+		PacketResponse      = true;
+	}
+
+	/* Check if we need to respond to the sent packet */
+	if (PacketResponse)
+	{
+		ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+		                                       TCPHeaderIN->SourcePort);
+
+		TCPHeaderOUT->SourcePort           = TCPHeaderIN->DestinationPort;
+		TCPHeaderOUT->DestinationPort      = TCPHeaderIN->SourcePort;
+		TCPHeaderOUT->SequenceNumber       = SwapEndian_32(ConnectionInfo->SequenceNumberOut);
+		TCPHeaderOUT->AcknowledgmentNumber = SwapEndian_32(ConnectionInfo->SequenceNumberIn);
+		TCPHeaderOUT->DataOffset           = (sizeof(TCP_Header_t) / sizeof(uint32_t));
+
+		if (!(ConnectionInfo->Buffer.InUse))
+		  TCPHeaderOUT->WindowSize         = SwapEndian_16(TCP_WINDOW_SIZE);
+		else
+		  TCPHeaderOUT->WindowSize         = SwapEndian_16(TCP_WINDOW_SIZE - ConnectionInfo->Buffer.Length);
+
+		TCPHeaderOUT->UrgentPointer        = 0;
+		TCPHeaderOUT->Checksum             = 0;
+		TCPHeaderOUT->Reserved             = 0;
+
+		TCPHeaderOUT->Checksum             = TCP_Checksum16(TCPHeaderOUT, &IPHeaderIN->DestinationAddress,
+		                                                    &IPHeaderIN->SourceAddress, sizeof(TCP_Header_t));
+
+		return sizeof(TCP_Header_t);
+	}
+
+	return NO_RESPONSE;
+}
+
+/** Calculates the appropriate TCP checksum, consisting of the addition of the one's compliment of each word,
+ *  complimented.
+ *
+ *  \param[in] TCPHeaderOutStart   Pointer to the start of the packet's outgoing TCP header
+ *  \param[in] SourceAddress       Source protocol IP address of the outgoing IP header
+ *  \param[in] DestinationAddress  Destination protocol IP address of the outgoing IP header
+ *  \param[in] TCPOutSize          Size in bytes of the TCP data header and payload
+ *
+ *  \return A 16-bit TCP checksum value
+ */
+static uint16_t TCP_Checksum16(void* TCPHeaderOutStart,
+                               const IP_Address_t* SourceAddress,
+                               const IP_Address_t* DestinationAddress,
+                               uint16_t TCPOutSize)
+{
+	uint32_t Checksum = 0;
+
+	/* TCP/IP checksums are the addition of the one's compliment of each word including the IP pseudo-header,
+	   complimented */
+
+	Checksum += ((uint16_t*)SourceAddress)[0];
+	Checksum += ((uint16_t*)SourceAddress)[1];
+	Checksum += ((uint16_t*)DestinationAddress)[0];
+	Checksum += ((uint16_t*)DestinationAddress)[1];
+	Checksum += SwapEndian_16(PROTOCOL_TCP);
+	Checksum += SwapEndian_16(TCPOutSize);
+
+	for (uint16_t CurrWord = 0; CurrWord < (TCPOutSize >> 1); CurrWord++)
+	  Checksum += ((uint16_t*)TCPHeaderOutStart)[CurrWord];
+
+	if (TCPOutSize & 0x01)
+	  Checksum += (((uint16_t*)TCPHeaderOutStart)[TCPOutSize >> 1] & 0x00FF);
+
+	while (Checksum & 0xFFFF0000)
+	  Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16));
+
+	return ~Checksum;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h
new file mode 100644
index 000000000..b8eb4cfa1
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h
@@ -0,0 +1,260 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for TCP.c.
+ */
+
+#ifndef _TCP_H_
+#define _TCP_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <stdbool.h>
+
+		#include "EthernetProtocols.h"
+		#include "Ethernet.h"
+		#include "ProtocolDecoders.h"
+
+	/* Macros: */
+		/** Maximum number of TCP ports which can be open at the one time. */
+		#define MAX_OPEN_TCP_PORTS              1
+
+		/** Maximum number of TCP connections which can be sustained at the one time. */
+		#define MAX_TCP_CONNECTIONS             3
+
+		/** TCP window size, giving the maximum number of bytes which can be buffered at the one time. */
+		#define TCP_WINDOW_SIZE                 512
+
+		/** Port number for HTTP transmissions. */
+		#define TCP_PORT_HTTP                   SwapEndian_16(80)
+
+		/** Data direction indicator for a TCP application buffer, indicating data from host-to-device. */
+		#define TCP_PACKETDIR_IN                false
+
+		/** Data direction indicator for a TCP application buffer, indicating data from device-to-host. */
+		#define TCP_PACKETDIR_OUT               true
+
+		/** Congestion Window Reduced TCP flag mask. */
+		#define TCP_FLAG_CWR                    (1 << 7)
+
+		/** Explicit Congestion Notification TCP flag mask. */
+		#define TCP_FLAG_ECE                    (1 << 6)
+
+		/** Urgent TCP flag mask. */
+		#define TCP_FLAG_URG                    (1 << 5)
+
+		/** Data Acknowledge TCP flag mask. */
+		#define TCP_FLAG_ACK                    (1 << 4)
+
+		/** Data Push TCP flag mask. */
+		#define TCP_FLAG_PSH                    (1 << 3)
+
+		/** Reset TCP flag mask. */
+		#define TCP_FLAG_RST                    (1 << 2)
+
+		/** Synchronize TCP flag mask. */
+		#define TCP_FLAG_SYN                    (1 << 1)
+
+		/** Connection Finalize TCP flag mask. */
+		#define TCP_FLAG_FIN                    (1 << 0)
+
+		/** Application macro: Determines if the given application buffer contains a packet received from the host
+		 *
+		 *  \param[in] Buffer  Application buffer to check
+		 *
+		 *  \return Boolean \c true if the buffer contains a packet from the host, \c false otherwise
+		 */
+		#define TCP_APP_HAS_RECEIVED_PACKET(Buffer)  (Buffer->Ready && (Buffer->Direction == TCP_PACKETDIR_IN))
+
+		/** Application macro: Indicates if the application buffer is currently locked by the application for device-to-host transfers.
+		 *
+		 *  \param[in] Buffer  Application buffer to check
+		 *
+		 *  \return Boolean \c true if the buffer has been captured by the application for device-to-host transmissions, \c false otherwise
+		 */
+		#define TCP_APP_HAVE_CAPTURED_BUFFER(Buffer) (!(Buffer->Ready) && Buffer->InUse && (Buffer->Direction == TCP_PACKETDIR_OUT))
+
+		/** Application macro: Indicates if the application can lock the buffer for multiple continued device-to-host transmissions.
+		 *
+		 *  \param[in] Buffer  Application buffer to check
+		 *
+		 *  \return Boolean \c true if the buffer may be captured by the application for device-to-host transmissions, \c false otherwise
+		 */
+		#define TCP_APP_CAN_CAPTURE_BUFFER(Buffer)   Buffer->InUse
+
+		/** Application macro: Captures the application buffer, locking it for device-to-host transmissions only. This should be
+		 *  performed when the application needs to transmit several packets worth of data in succession with no interruptions from the host.
+		 *
+		 *  \pre The application must check that the buffer can be locked first using TCP_APP_CAN_CAPTURE_BUFFER().
+		 *
+		 *  \param[in] Buffer  Application buffer to lock
+		 */
+		#define TCP_APP_CAPTURE_BUFFER(Buffer)       do { Buffer->Direction = TCP_PACKETDIR_OUT; Buffer->InUse = true; } while (0)
+
+		/** Application macro: Releases a captured application buffer, allowing for host-to-device packets to be received.
+		 *
+		 *  \param[in] Buffer  Application buffer to release
+		 */
+		#define TCP_APP_RELEASE_BUFFER(Buffer)       do { Buffer->InUse = false; } while (0)
+
+		/** Application macro: Sends the contents of the given application buffer to the host.
+		 *
+		 *  \param[in] Buffer  Application buffer to send
+		 *  \param[in] Len     Length of data contained in the buffer
+		 */
+		#define TCP_APP_SEND_BUFFER(Buffer, Len)     do { Buffer->Direction = TCP_PACKETDIR_OUT; Buffer->Length = Len; Buffer->Ready = true; } while (0)
+
+		/** Application macro: Clears the application buffer, ready for a packet to be written to it.
+		 *
+		 *  \param[in] Buffer  Application buffer to clear
+		 */
+		#define TCP_APP_CLEAR_BUFFER(Buffer)         do { Buffer->Ready = false; Buffer->Length = 0; } while (0)
+
+		/** Application macro: Closes an open connection to a host.
+		 *
+		 *  \param[in] Connection  Open TCP connection to close
+		 */
+		#define TCP_APP_CLOSECONNECTION(Connection)  do { Connection->State = TCP_Connection_Closing;  } while (0)
+
+	/* Enums: */
+		/** Enum for possible TCP port states. */
+		enum TCP_PortStates_t
+		{
+			TCP_Port_Closed            = 0, /**< TCP port closed, no connections to a host may be made on this port. */
+			TCP_Port_Open              = 1, /**< TCP port open, connections to a host may be made on this port. */
+		};
+
+		/** Enum for possible TCP connection states. */
+		enum TCP_ConnectionStates_t
+		{
+			TCP_Connection_Listen      = 0, /**< Listening for a connection from a host */
+			TCP_Connection_SYNSent     = 1, /**< Unused */
+			TCP_Connection_SYNReceived = 2, /**< SYN received, waiting for ACK */
+			TCP_Connection_Established = 3, /**< Connection established in both directions */
+			TCP_Connection_FINWait1    = 4, /**< Closing, waiting for ACK */
+			TCP_Connection_FINWait2    = 5, /**< Closing, waiting for FIN ACK */
+			TCP_Connection_CloseWait   = 6, /**< Closing, waiting for ACK */
+			TCP_Connection_Closing     = 7, /**< Unused */
+			TCP_Connection_LastACK     = 8, /**< Unused */
+			TCP_Connection_TimeWait    = 9, /**< Unused */
+			TCP_Connection_Closed      = 10, /**< Connection closed in both directions */
+		};
+
+	/* Type Defines: */
+		/** Type define for a TCP connection buffer structure, including size, data and direction. */
+		typedef struct
+		{
+			uint16_t               Length; /**< Length of data in the TCP application buffer */
+			uint8_t                Data[TCP_WINDOW_SIZE]; /**< TCP application data buffer */
+			bool                   Direction; /**< Buffer transmission direction, either TCP_PACKETDIR_IN  or TCP_PACKETDIR_OUT */
+			bool                   Ready; /**< If data from host, indicates buffer ready to be read, otherwise indicates
+			                               *   buffer ready to be sent to the host
+			                               */
+			bool                   InUse; /**< Indicates if the buffer is locked to to the current direction, and cannot be changed */
+		} TCP_ConnectionBuffer_t;
+
+		/** Type define for a TCP connection information structure. */
+		typedef struct
+		{
+			uint32_t               SequenceNumberIn; /**< Current TCP sequence number for host-to-device */
+			uint32_t               SequenceNumberOut; /**< Current TCP sequence number for device-to-host */
+			TCP_ConnectionBuffer_t Buffer; /**< Connection application data buffer */
+		} TCP_ConnectionInfo_t;
+
+		/** Type define for a complete TCP connection state. */
+		typedef struct
+		{
+			uint16_t               Port; /**< Connection port number on the device */
+			uint16_t               RemotePort; /**< Connection port number on the host */
+			IP_Address_t           RemoteAddress; /**< Connection protocol IP address of the host */
+			TCP_ConnectionInfo_t   Info; /**< Connection information, including application buffer */
+			uint8_t                State; /**< Current connection state, a value from the \ref TCP_ConnectionStates_t enum */
+		} TCP_ConnectionState_t;
+
+		/** Type define for a TCP port state. */
+		typedef struct
+		{
+			uint16_t               Port; /**< TCP port number on the device */
+			uint8_t                State; /**< Current port state, a value from the \ref TCP_PortStates_t enum */
+			void                   (*ApplicationHandler) (TCP_ConnectionState_t* ConnectionState,
+			                                              TCP_ConnectionBuffer_t* Buffer); /**< Port application handler */
+		} TCP_PortState_t;
+
+		/** Type define for a TCP packet header. */
+		typedef struct
+		{
+			uint16_t               SourcePort; /**< Source port of the TCP packet */
+			uint16_t               DestinationPort; /**< Destination port of the TCP packet */
+
+			uint32_t               SequenceNumber; /**< Data sequence number of the packet */
+			uint32_t               AcknowledgmentNumber; /**< Data acknowledgment number of the packet */
+
+			unsigned               Reserved : 4; /**< Reserved, must be all 0 */
+			unsigned               DataOffset : 4; /**< Offset of the data from the start of the header, in 4 byte chunks */
+			uint8_t                Flags; /**< TCP packet flags */
+			uint16_t               WindowSize; /**< Current data window size (bytes remaining in reception buffer) */
+
+			uint16_t               Checksum; /**< TCP checksum */
+			uint16_t               UrgentPointer; /**< Urgent data pointer */
+		} TCP_Header_t;
+
+	/* Function Prototypes: */
+		void                  TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo,
+		                                  Ethernet_Frame_Info_t* const FrameOUT);
+		void                  TCP_Init(void);
+		bool                  TCP_SetPortState(const uint16_t Port,
+		                                       const uint8_t State,
+		                                       void (*Handler)(TCP_ConnectionState_t*, TCP_ConnectionBuffer_t*));
+		uint8_t               TCP_GetPortState(const uint16_t Port);
+		bool                  TCP_SetConnectionState(const uint16_t Port,
+		                                             const IP_Address_t* RemoteAddress,
+		                                             const uint16_t RemotePort,
+		                                             const uint8_t State);
+		uint8_t               TCP_GetConnectionState(const uint16_t Port,
+		                                             const IP_Address_t* RemoteAddress,
+		                                             const uint16_t RemotePort);
+		TCP_ConnectionInfo_t* TCP_GetConnectionInfo(const uint16_t Port,
+		                                            const IP_Address_t* RemoteAddress,
+		                                            const uint16_t RemotePort);
+		int16_t               TCP_ProcessTCPPacket(void* IPHeaderInStart,
+		                                           void* TCPHeaderInStart,
+		                                           void* TCPHeaderOutStart);
+
+		#if defined(INCLUDE_FROM_TCP_C)
+			static uint16_t TCP_Checksum16(void* TCPHeaderOutStart,
+			                               const IP_Address_t* SourceAddress,
+			                               const IP_Address_t* DestinationAddress,
+			                               uint16_t TCPOutSize);
+		#endif
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c
new file mode 100644
index 000000000..03c19e00e
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c
@@ -0,0 +1,84 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  User Datagram Protocol (UDP) packet handling routines. This protocol handles high throughput, low
+ *  reliability packets which are typically used to encapsulate streaming data.
+ */
+
+#define  INCLUDE_FROM_UDP_C
+#include "UDP.h"
+
+/** Processes a UDP packet inside an Ethernet frame, and writes the appropriate response
+ *  to the output Ethernet frame if a sub-protocol handler has created a response packet.
+ *
+ *  \param[in] IPHeaderInStart     Pointer to the start of the incoming packet's IP header
+ *  \param[in] UDPHeaderInStart    Pointer to the start of the incoming packet's UDP header
+ *  \param[out] UDPHeaderOutStart  Pointer to the start of the outgoing packet's UDP header
+ *
+ *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
+ */
+int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart,
+                             void* UDPHeaderInStart,
+                             void* UDPHeaderOutStart)
+{
+	UDP_Header_t* UDPHeaderIN  = (UDP_Header_t*)UDPHeaderInStart;
+	UDP_Header_t* UDPHeaderOUT = (UDP_Header_t*)UDPHeaderOutStart;
+
+	int16_t RetSize = NO_RESPONSE;
+
+	DecodeUDPHeader(UDPHeaderInStart);
+
+	switch (SwapEndian_16(UDPHeaderIN->DestinationPort))
+	{
+		case UDP_PORT_DHCP_REQUEST:
+			RetSize = DHCP_ProcessDHCPPacket(IPHeaderInStart,
+			                                 &((uint8_t*)UDPHeaderInStart)[sizeof(UDP_Header_t)],
+		                                     &((uint8_t*)UDPHeaderOutStart)[sizeof(UDP_Header_t)]);
+			break;
+	}
+
+	/* Check to see if the protocol processing routine has filled out a response */
+	if (RetSize > 0)
+	{
+		/* Fill out the response UDP packet header */
+		UDPHeaderOUT->SourcePort      = UDPHeaderIN->DestinationPort;
+		UDPHeaderOUT->DestinationPort = UDPHeaderIN->SourcePort;
+		UDPHeaderOUT->Checksum        = 0;
+		UDPHeaderOUT->Length          = SwapEndian_16(sizeof(UDP_Header_t) + RetSize);
+
+		/* Return the size of the response so far */
+		return (sizeof(UDP_Header_t) + RetSize);
+	}
+
+	return NO_RESPONSE;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h
new file mode 100644
index 000000000..459d8be40
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h
@@ -0,0 +1,70 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for UDP.c.
+ */
+
+#ifndef _UDP_H_
+#define _UDP_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+
+		#include "EthernetProtocols.h"
+		#include "Ethernet.h"
+		#include "ProtocolDecoders.h"
+		#include "DHCP.h"
+
+	/* Macros: */
+		/** Source UDP port for a DHCP request. */
+		#define UDP_PORT_DHCP_REQUEST 67
+
+		/** Destination UDP port for a DHCP reply. */
+		#define UDP_PORT_DHCP_REPLY   68
+
+	/* Type Defines: */
+		/** Type define for a UDP packet header. */
+		typedef struct
+		{
+			uint16_t SourcePort; /**< Packet source port */
+			uint16_t DestinationPort; /**< Packet destination port */
+			uint16_t Length; /**< Total packet length, in bytes */
+			uint16_t Checksum; /**< Optional UDP packet checksum */
+		} UDP_Header_t;
+
+	/* Function Prototypes: */
+		int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart,
+		                             void* UDPHeaderInStart,
+		                             void* UDPHeaderOutStart);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c
new file mode 100644
index 000000000..be4c3a6f6
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c
@@ -0,0 +1,203 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Simple webserver application for demonstrating the RNDIS demo and TCP/IP stack. This
+ *  application will serve up a static HTTP web page when requested by the host.
+ */
+
+#include "Webserver.h"
+
+/** HTTP server response header, for transmission before the page contents. This indicates to the host that a page exists at the
+ *  given location, and gives extra connection information.
+ */
+const char HTTP200Header[] PROGMEM = "HTTP/1.1 200 OK\r\n"
+                                     "Server: LUFA RNDIS\r\n"
+                                     "Content-type: text/html\r\n"
+                                     "Connection: close\r\n\r\n";
+
+/** HTTP server response header, for transmission before a resource not found error. This indicates to the host that the given
+ *  given URL is invalid, and gives extra error information.
+ */
+const char HTTP404Header[] PROGMEM = "HTTP/1.1 404 Not Found\r\n"
+                                     "Server: LUFA RNDIS\r\n"
+                                     "Connection: close\r\n\r\n";
+
+/** HTTP page to serve to the host when a HTTP request is made. This page is too long for a single response, thus it is automatically
+ *  broken up into smaller blocks and sent as a series of packets each time the webserver application callback is run.
+ */
+const char HTTPPage[] PROGMEM =
+		"<html>"
+		"	<head>"
+		"		<title>"
+		"			LUFA Webserver Demo"
+		"		</title>"
+		"	</head>"
+		"	<body>"
+		"		<h1>Hello from your USB AVR!</h1>"
+		"		<p>"
+		"			Hello! Welcome to the LUFA RNDIS Demo Webserver test page, running on your USB AVR via the LUFA library. This demonstrates the HTTP webserver, TCP/IP stack and RNDIS demo all running atop the LUFA USB stack."
+		"			<br /><br />"
+		"			<small>Project Information: <a href=\"http://www.lufa-lib.org\">http://www.lufa-lib.org</a>.</small>"
+		"			<hr />"
+		"			<i>LUFA Version: </i>" LUFA_VERSION_STRING
+		"		</p>"
+		"	</body>"
+		"</html>";
+
+
+/** Initializes the Webserver application, opening the appropriate HTTP port in the TCP handler and registering the application
+ *  callback routine for packets sent to the HTTP protocol port.
+ */
+void Webserver_Init(void)
+{
+	/* Open the HTTP port in the TCP protocol so that HTTP connections to the device can be established */
+	TCP_SetPortState(TCP_PORT_HTTP, TCP_Port_Open, Webserver_ApplicationCallback);
+}
+
+/** Indicates if a given request equals the given HTTP command.
+ *
+ *  \param[in] RequestHeader  HTTP request made by the host
+ *  \param[in] Command        HTTP command to compare the request to
+ *
+ *  \return Boolean \c true if the command matches the request, \c false otherwise
+ */
+static bool IsHTTPCommand(uint8_t* RequestHeader,
+                          char* Command)
+{
+	/* Returns true if the non null terminated string in RequestHeader matches the null terminated string Command */
+	return (strncmp((char*)RequestHeader, Command, strlen(Command)) == 0);
+}
+
+/** Application callback routine, executed each time the TCP processing task runs. This callback determines what request
+ *  has been made (if any), and serves up appropriate responses.
+ *
+ *  \param[in] ConnectionState  Pointer to a TCP Connection State structure giving connection information
+ *  \param[in,out] Buffer       Pointer to the application's send/receive packet buffer
+ */
+void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState,
+                                   TCP_ConnectionBuffer_t* const Buffer)
+{
+	char*          BufferDataStr = (char*)Buffer->Data;
+	static uint8_t PageBlock     = 0;
+
+	/* Check to see if a packet has been received on the HTTP port from a remote host */
+	if (TCP_APP_HAS_RECEIVED_PACKET(Buffer))
+	{
+		if (IsHTTPCommand(Buffer->Data, "GET"))
+		{
+			if (IsHTTPCommand(Buffer->Data, "GET / "))
+			{
+				PageBlock = 0;
+
+				/* Copy the HTTP 200 response header into the packet buffer */
+				strcpy_P(BufferDataStr, HTTP200Header);
+
+				/* Send the buffer contents to the host */
+				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
+
+				/* Lock the buffer to Device->Host transmissions only while we send the page contents */
+				TCP_APP_CAPTURE_BUFFER(Buffer);
+			}
+			else
+			{
+				/* Copy the HTTP 404 response header into the packet buffer */
+				strcpy_P(BufferDataStr, HTTP404Header);
+
+				/* Send the buffer contents to the host */
+				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
+
+				/* All data sent, close the connection */
+				TCP_APP_CLOSECONNECTION(ConnectionState);
+			}
+		}
+		else if (IsHTTPCommand(Buffer->Data, "HEAD"))
+		{
+			if (IsHTTPCommand(Buffer->Data, "HEAD / "))
+			{
+				/* Copy the HTTP response header into the packet buffer */
+				strcpy_P(BufferDataStr, HTTP200Header);
+
+				/* Send the buffer contents to the host */
+				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
+			}
+			else
+			{
+				/* Copy the HTTP response header into the packet buffer */
+				strcpy_P(BufferDataStr, HTTP404Header);
+
+				/* Send the buffer contents to the host */
+				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
+			}
+
+			/* All data sent, close the connection */
+			TCP_APP_CLOSECONNECTION(ConnectionState);
+		}
+		else if (IsHTTPCommand(Buffer->Data, "TRACE"))
+		{
+			/* Echo the host's query back to the host */
+			TCP_APP_SEND_BUFFER(Buffer, Buffer->Length);
+
+			/* All data sent, close the connection */
+			TCP_APP_CLOSECONNECTION(ConnectionState);
+		}
+		else
+		{
+			/* Unknown request, just clear the buffer (drop the packet) */
+			TCP_APP_CLEAR_BUFFER(Buffer);
+		}
+	}
+	else if (TCP_APP_HAVE_CAPTURED_BUFFER(Buffer))
+	{
+		uint16_t RemLength = strlen_P(&HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE]);
+		uint16_t Length;
+
+		/* Determine the length of the loaded block */
+		Length = ((RemLength > HTTP_REPLY_BLOCK_SIZE) ? HTTP_REPLY_BLOCK_SIZE : RemLength);
+
+		/* Copy the next buffer sized block of the page to the packet buffer */
+		strncpy_P(BufferDataStr, &HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE], Length);
+
+		/* Send the buffer contents to the host */
+		TCP_APP_SEND_BUFFER(Buffer, Length);
+
+		/* Check to see if the entire page has been sent */
+		if (PageBlock++ == (sizeof(HTTPPage) / HTTP_REPLY_BLOCK_SIZE))
+		{
+			/* Unlock the buffer so that the host can fill it with future packets */
+			TCP_APP_RELEASE_BUFFER(Buffer);
+
+			/* Close the connection to the host */
+			TCP_APP_CLOSECONNECTION(ConnectionState);
+		}
+	}
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h
new file mode 100644
index 000000000..e8bb542c1
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h
@@ -0,0 +1,57 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Webserver.c.
+ */
+
+#ifndef _WEBSERVER_H_
+#define _WEBSERVER_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Version.h>
+
+		#include "TCP.h"
+
+	/* Macros: */
+		/** Maximum size of a HTTP response per transmission */
+		#define HTTP_REPLY_BLOCK_SIZE     128
+
+	/* Function Prototypes: */
+		void Webserver_Init(void);
+		void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState,
+		                                   TCP_ConnectionBuffer_t* const Buffer);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c
new file mode 100644
index 000000000..aac1b146d
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c
@@ -0,0 +1,179 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the RNDISEthernet demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "RNDISEthernet.h"
+
+/** Message buffer for RNDIS messages processed by the RNDIS device class driver. */
+static uint8_t RNDIS_Message_Buffer[192];
+
+/** Global to store the incoming frame from the host before it is processed by the device. */
+static Ethernet_Frame_Info_t FrameIN;
+
+/** Global to store the outgoing frame created in the device before it is sent to the host. */
+static Ethernet_Frame_Info_t FrameOUT;
+
+/** LUFA RNDIS Class driver interface configuration and state information. This structure is
+ *  passed to all RNDIS Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface =
+	{
+		.Config =
+			{
+				.ControlInterfaceNumber         = INTERFACE_ID_CDC_CCI,
+				.DataINEndpoint                 =
+					{
+						.Address                = CDC_TX_EPADDR,
+						.Size                   = CDC_TXRX_EPSIZE,
+						.Banks                  = 1,
+					},
+				.DataOUTEndpoint                =
+					{
+						.Address                = CDC_RX_EPADDR,
+						.Size                   = CDC_TXRX_EPSIZE,
+						.Banks                  = 1,
+					},
+				.NotificationEndpoint           =
+					{
+						.Address                = CDC_NOTIFICATION_EPADDR,
+						.Size                   = CDC_NOTIFICATION_EPSIZE,
+						.Banks                  = 1,
+					},
+				.AdapterVendorDescription       = "LUFA RNDIS Demo Adapter",
+				.AdapterMACAddress              = {ADAPTER_MAC_ADDRESS},
+				.MessageBuffer                  = RNDIS_Message_Buffer,
+				.MessageBufferLength            = sizeof(RNDIS_Message_Buffer),
+			},
+	};
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	TCP_Init();
+	Webserver_Init();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		if (RNDIS_Device_IsPacketReceived(&Ethernet_RNDIS_Interface))
+		{
+			LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+
+			RNDIS_Device_ReadPacket(&Ethernet_RNDIS_Interface, &FrameIN.FrameData, &FrameIN.FrameLength);
+			Ethernet_ProcessPacket(&FrameIN, &FrameOUT);
+
+			if (FrameOUT.FrameLength)
+			{
+				RNDIS_Device_SendPacket(&Ethernet_RNDIS_Interface, &FrameOUT.FrameData, FrameOUT.FrameLength);
+				FrameOUT.FrameLength = 0;
+			}
+
+			LEDs_SetAllLEDs(LEDMASK_USB_READY);
+		}
+
+		TCP_TCPTask(&Ethernet_RNDIS_Interface, &FrameOUT);
+
+		RNDIS_Device_USBTask(&Ethernet_RNDIS_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	Serial_Init(9600, false);
+	USB_Init();
+
+	/* Create a stdio stream for the serial port for stdin and stdout */
+	Serial_CreateStream(NULL);
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= RNDIS_Device_ConfigureEndpoints(&Ethernet_RNDIS_Interface);
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	RNDIS_Device_ProcessControlRequest(&Ethernet_RNDIS_Interface);
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h
new file mode 100644
index 000000000..ab2488b77
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h
@@ -0,0 +1,84 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for RNDISEthernet.c.
+ */
+
+#ifndef _RNDISETHERNET_H_
+#define _RNDISETHERNET_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include "Lib/Ethernet.h"
+		#include "Lib/TCP.h"
+		#include "Lib/ARP.h"
+		#include "Lib/Webserver.h"
+		#include "Config/AppConfig.h"
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Peripheral/Serial.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+		#define LEDMASK_USB_BUSY          LEDS_LED2
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt
new file mode 100644
index 000000000..a2c2ac604
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt
@@ -0,0 +1,146 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage RNDIS Class Ethernet Demo (with Webserver/Telnet)
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>Microsoft RNDIS Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Remote Network Driver Interface demonstration application.
+ *  This gives a simple reference application for implementing
+ *  a CDC RNDIS device acting as a simple network interface for
+ *  ethernet packet exchange. RNDIS is a proprietary Microsoft
+ *  standard; this demo will only work on Windows 2000 (manually
+ *  patched with the Microsoft RNDIS hotfix) and above (with no
+ *  manual patches), or on the latest Linux kernels.
+ *
+ *  Before running, you will need to install the INF file that
+ *  is located in the RNDISEthernet project directory. This will
+ *  enable Windows to use its inbuilt RNDIS drivers, negating the
+ *  need for special Windows drivers for the device. To install,
+ *  right-click the .INF file and choose the Install option. If
+ *  Windows 2000 is used, the Microsoft INF file in the hotfix
+ *  will need to be altered to use the VID/PID of the demo and
+ *  then chosen instead of the LUFA RNDIS INF file when prompted.
+ *
+ *  When enumerated, this demo will install as a new network
+ *  adapter which ethernet packets can be sent to and received
+ *  from. Running on top of the adapter is a very simple TCP/IP
+ *  stack with a HTTP webserver and TELNET host which can be
+ *  accessed through a web browser at IP address 10.0.0.2:80 or
+ *  through a TELNET client at 10.0.0.2:25. This device also supports
+ *  ping echos via the ICMP protocol.
+ *
+ *  \note The TCP/IP stack in this demo has a number of limitations
+ *  and should serve as an example only - it is not fully featured nor
+ *  compliant to the TCP/IP specification. For complete projects, it is
+ *  recommended that it be replaced with an external open source TCP/IP
+ *  stack that is feature complete, such as the uIP stack.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>CLIENT_IP_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configures the IP address given to the client (PC) via the DHCP server.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>SERVER_IP_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configures the IP address of the virtual server.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>ADAPTER_MAC_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configures the MAC address of the RNDIS adapter on the host (PC) side.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>SERVER_MAC_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configures the MAC address of the virtual server on the network.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_ETHERNET</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_ARP</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_IP</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_ICMP</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_TCP</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_UDP</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_DHCP</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/asf.xml b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/asf.xml
new file mode 100644
index 000000000..e871a8799
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/asf.xml
@@ -0,0 +1,84 @@
+<asf xmlversion="1.0">

+	<project caption="RNDIS Ethernet Device Demo (Class Driver APIs)" id="lufa.demos.device.class.rndis.example.avr8">

+		<require idref="lufa.demos.device.class.rndis"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="RNDIS Ethernet Device Demo (Class Driver APIs)" id="lufa.demos.device.class.rndis.example.xmega">

+		<require idref="lufa.demos.device.class.rndis"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.rndis" caption="RNDIS Ethernet Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Microsoft RNDIS Ethernet networking device demo, implementing a basic HTTP webserver. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="RNDIS Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="RNDISEthernet.txt"/>

+		<build type="distribute" subtype="user-file" value="LUFA RNDIS.inf"/>

+

+		<build type="c-source" value="RNDISEthernet.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="c-source" value="Lib/ARP.c"/>

+		<build type="c-source" value="Lib/DHCP.c"/>

+		<build type="c-source" value="Lib/Ethernet.c"/>

+		<build type="c-source" value="Lib/ICMP.c"/>

+		<build type="c-source" value="Lib/IP.c"/>

+		<build type="c-source" value="Lib/ProtocolDecoders.c"/>

+		<build type="c-source" value="Lib/TCP.c"/>

+		<build type="c-source" value="Lib/UDP.c"/>

+		<build type="c-source" value="Lib/Webserver.c"/>

+		<build type="header-file" value="RNDISEthernet.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+		<build type="header-file" value="Lib/ARP.h"/>

+		<build type="header-file" value="Lib/DHCP.h"/>

+		<build type="header-file" value="Lib/Ethernet.h"/>

+		<build type="header-file" value="Lib/ICMP.h"/>

+		<build type="header-file" value="Lib/IP.h"/>

+		<build type="header-file" value="Lib/ProtocolDecoders.h"/>

+		<build type="header-file" value="Lib/TCP.h"/>

+		<build type="header-file" value="Lib/UDP.h"/>

+		<build type="header-file" value="Lib/Webserver.h"/>

+		<build type="header-file" value="Lib/EthernetProtocols.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

+		<build type="header-file" value="Config/AppConfig.h"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.peripheral.usart"/>

+		<require idref="lufa.drivers.misc.ansi"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/doxyfile b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/doxyfile
new file mode 100644
index 000000000..29d07c317
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - RNDIS Ethernet Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/makefile b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/makefile
new file mode 100644
index 000000000..c6a3a54a4
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/makefile
@@ -0,0 +1,44 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = RNDISEthernet
+SRC          = $(TARGET).c Descriptors.c Lib/Ethernet.c Lib/ProtocolDecoders.c Lib/ICMP.c Lib/TCP.c Lib/UDP.c Lib/DHCP.c Lib/ARP.c \
+               Lib/IP.c Lib/Webserver.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/Config/LUFAConfig.h
new file mode 100644
index 000000000..0ec4635eb
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               4
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c
new file mode 100644
index 000000000..5ec042cb0
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c
@@ -0,0 +1,245 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = CDC_CSCP_CDCClass,
+	.SubClass               = CDC_CSCP_NoSpecificSubclass,
+	.Protocol               = CDC_CSCP_NoSpecificProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2044,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 2,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.CDC_CCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC_Functional_Header =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
+
+			.CDCSpecification       = VERSION_BCD(1,1,0),
+		},
+
+	.CDC_Functional_ACM =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
+
+			.Capabilities           = 0x06,
+		},
+
+	.CDC_Functional_Union =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
+
+			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
+			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
+		},
+
+	.CDC_NotificationEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
+			.PollingIntervalMS      = 0xFF
+		},
+
+	.CDC_DCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = CDC_CSCP_CDCDataClass,
+			.SubClass               = CDC_CSCP_NoDataSubclass,
+			.Protocol               = CDC_CSCP_NoDataProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_RX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.CDC_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_TX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA CDC Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h
new file mode 100644
index 000000000..5b4bf2aa7
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h
@@ -0,0 +1,110 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Macros: */
+		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 2)
+
+		/** Endpoint address of the CDC device-to-host data IN endpoint. */
+		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 3)
+
+		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
+		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 4)
+
+		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPSIZE        8
+
+		/** Size in bytes of the CDC data IN and OUT endpoints. */
+		#define CDC_TXRX_EPSIZE                16
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t    Config;
+
+			// CDC Control Interface
+			USB_Descriptor_Interface_t               CDC_CCI_Interface;
+			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
+			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
+			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
+			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
+
+			// CDC Data Interface
+			USB_Descriptor_Interface_t               CDC_DCI_Interface;
+			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
+			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
+			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/LUFA VirtualSerial.inf b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/LUFA VirtualSerial.inf
new file mode 100644
index 000000000..21d2d12b6
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/LUFA VirtualSerial.inf
@@ -0,0 +1,66 @@
+;************************************************************
+; Windows USB CDC ACM Setup File
+; Copyright (c) 2000 Microsoft Corporation
+;************************************************************
+
+[DefaultInstall]
+CopyINF="LUFA VirtualSerial.inf"
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%MFGNAME%
+DriverVer=7/1/2012,10.0.0.0
+
+[Manufacturer]
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
+
+[SourceDisksNames]
+
+[SourceDisksFiles]
+
+[DestinationDirs]
+DefaultDestDir=12
+
+[DriverInstall]
+Include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.AddReg
+
+[DriverInstall.Services]
+Include=mdmcpq.inf
+AddService=usbser, 0x00000002, LowerFilter_Service_Inst
+
+[DriverInstall.AddReg]
+HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
+
+;------------------------------------------------------------------------------
+;  Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID.  Use the format as shown below.
+; Note: One INF file can be used for multiple devices with different VID and PIDs.
+; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+[DeviceList.NTx86]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+;------------------------------------------------------------------------------
+;  String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+MFGNAME="http://www.lufa-lib.org"
+DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"
\ No newline at end of file
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c
new file mode 100644
index 000000000..a3d419ae5
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c
@@ -0,0 +1,202 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the VirtualSerial demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "VirtualSerial.h"
+
+/** LUFA CDC Class driver interface configuration and state information. This structure is
+ *  passed to all CDC Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
+	{
+		.Config =
+			{
+				.ControlInterfaceNumber   = INTERFACE_ID_CDC_CCI,
+				.DataINEndpoint           =
+					{
+						.Address          = CDC_TX_EPADDR,
+						.Size             = CDC_TXRX_EPSIZE,
+						.Banks            = 1,
+					},
+				.DataOUTEndpoint =
+					{
+						.Address          = CDC_RX_EPADDR,
+						.Size             = CDC_TXRX_EPSIZE,
+						.Banks            = 1,
+					},
+				.NotificationEndpoint =
+					{
+						.Address          = CDC_NOTIFICATION_EPADDR,
+						.Size             = CDC_NOTIFICATION_EPSIZE,
+						.Banks            = 1,
+					},
+			},
+	};
+
+/** Standard file stream for the CDC interface when set up, so that the virtual CDC COM port can be
+ *  used like any regular character stream in the C APIs.
+ */
+static FILE USBSerialStream;
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	/* Create a regular character stream for the interface so that it can be used with the stdio.h functions */
+	CDC_Device_CreateStream(&VirtualSerial_CDC_Interface, &USBSerialStream);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		CheckJoystickMovement();
+
+		/* Must throw away unused bytes from the host, or it will lock up while waiting for the device */
+		CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
+
+		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Checks for changes in the position of the board joystick, sending strings to the host upon each change. */
+void CheckJoystickMovement(void)
+{
+	uint8_t     JoyStatus_LCL = Joystick_GetStatus();
+	char*       ReportString  = NULL;
+	static bool ActionSent    = false;
+
+	if (JoyStatus_LCL & JOY_UP)
+	  ReportString = "Joystick Up\r\n";
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  ReportString = "Joystick Down\r\n";
+	else if (JoyStatus_LCL & JOY_LEFT)
+	  ReportString = "Joystick Left\r\n";
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  ReportString = "Joystick Right\r\n";
+	else if (JoyStatus_LCL & JOY_PRESS)
+	  ReportString = "Joystick Pressed\r\n";
+	else
+	  ActionSent = false;
+
+	if ((ReportString != NULL) && (ActionSent == false))
+	{
+		ActionSent = true;
+
+		/* Write the string to the virtual COM port via the created character stream */
+		fputs(ReportString, &USBSerialStream);
+
+		/* Alternatively, without the stream: */
+		// CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString);
+	}
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
+}
+
+/** CDC class driver callback function the processing of changes to the virtual
+ *  control lines sent from the host..
+ *
+ *  \param[in] CDCInterfaceInfo  Pointer to the CDC class interface configuration structure being referenced
+ */
+void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t *const CDCInterfaceInfo)
+{
+	/* You can get changes to the virtual CDC lines in this callback; a common
+	   use-case is to use the Data Terminal Ready (DTR) flag to enable and
+	   disable CDC communications in your application when set to avoid the
+	   application blocking while waiting for a host to become ready and read
+	   in the pending data from the USB endpoints.
+	*/
+	bool HostReady = (CDCInterfaceInfo->State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR) != 0;
+}
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h
new file mode 100644
index 000000000..89f809982
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h
@@ -0,0 +1,77 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for VirtualSerial.c.
+ */
+
+#ifndef _VIRTUALSERIAL_H_
+#define _VIRTUALSERIAL_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <string.h>
+		#include <stdio.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void CheckJoystickMovement(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt
new file mode 100644
index 000000000..c802d9950
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt
@@ -0,0 +1,76 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Communications Device Class (Virtual Serial Port) Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Abstract Control Model (ACM)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF CDC Class Standard</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Communications Device Class demonstration application.
+ *  This gives a simple reference application for implementing
+ *  a CDC device acting as a virtual serial port. Joystick
+ *  actions are transmitted to the host as strings. The device
+ *  does not respond to serial data sent from the host.
+ *
+ *  After running this demo for the first time on a new computer,
+ *  you will need to supply the .INF file located in this demo
+ *  project's directory as the device's driver when running under
+ *  Windows. This will enable Windows to use its inbuilt CDC drivers,
+ *  negating the need for custom drivers for the device. Other
+ *  Operating Systems should automatically use their own inbuilt
+ *  CDC-ACM drivers.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/asf.xml b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/asf.xml
new file mode 100644
index 000000000..4839b7c5f
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/asf.xml
@@ -0,0 +1,62 @@
+<asf xmlversion="1.0">

+	<project caption="Virtual Serial CDC Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc.example.avr8">

+		<require idref="lufa.demos.device.class.cdc"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Virtual Serial CDC Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc.example.xmega">

+		<require idref="lufa.demos.device.class.cdc"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.cdc" caption="Virtual Serial CDC Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Virtual Serial device demo, implementing a virtual serial channel between the host PC and the device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="CDC Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="VirtualSerial.txt"/>

+		<build type="distribute" subtype="user-file" value="LUFA VirtualSerial.inf"/>

+

+		<build type="c-source" value="VirtualSerial.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="VirtualSerial.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.joystick"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/doxyfile b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/doxyfile
new file mode 100644
index 000000000..aa21df582
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Virtual Serial Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/makefile b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/makefile
new file mode 100644
index 000000000..f0f73257a
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerial/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = VirtualSerial
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/AppConfig.h b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/AppConfig.h
new file mode 100644
index 000000000..b18b2c414
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/AppConfig.h
@@ -0,0 +1,50 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define TOTAL_LUNS                1
+
+	#define DISK_READ_ONLY            false
+
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/LUFAConfig.h
new file mode 100644
index 000000000..62549878d
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               5
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c
new file mode 100644
index 000000000..9c8792c33
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c
@@ -0,0 +1,295 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_IADDeviceClass,
+	.SubClass               = USB_CSCP_IADDeviceSubclass,
+	.Protocol               = USB_CSCP_IADDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2068,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 3,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.CDC_IAD =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
+
+			.FirstInterfaceIndex    = INTERFACE_ID_CDC_CCI,
+			.TotalInterfaces        = 2,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.IADStrIndex            = NO_DESCRIPTOR
+		},
+
+	.CDC_CCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC_Functional_Header =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
+
+			.CDCSpecification       = VERSION_BCD(1,1,0),
+		},
+
+	.CDC_Functional_ACM =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
+
+			.Capabilities           = 0x06,
+		},
+
+	.CDC_Functional_Union =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
+
+			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
+			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
+		},
+
+	.CDC_NotificationEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
+			.PollingIntervalMS      = 0xFF
+		},
+
+	.CDC_DCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = CDC_CSCP_CDCDataClass,
+			.SubClass               = CDC_CSCP_NoDataSubclass,
+			.Protocol               = CDC_CSCP_NoDataProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_RX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.CDC_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_TX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.MS_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_MassStorage,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = MS_CSCP_MassStorageClass,
+			.SubClass               = MS_CSCP_SCSITransparentSubclass,
+			.Protocol               = MS_CSCP_BulkOnlyTransportProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.MS_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = MASS_STORAGE_IN_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.MS_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = MASS_STORAGE_OUT_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA CDC and Mass Storage Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h
new file mode 100644
index 000000000..43c2b3165
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h
@@ -0,0 +1,128 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 1)
+
+		/** Endpoint address of the CDC device-to-host data IN endpoint. */
+		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 2)
+
+		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
+		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 3)
+
+		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPSIZE        8
+
+		/** Size in bytes of the CDC data IN and OUT endpoints. */
+		#define CDC_TXRX_EPSIZE                16
+
+		/** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
+		#define MASS_STORAGE_IN_EPADDR         (ENDPOINT_DIR_IN  | 4)
+
+		/** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */
+		#define MASS_STORAGE_OUT_EPADDR        (ENDPOINT_DIR_OUT | 5)
+
+		/** Size in bytes of the Mass Storage data endpoints. */
+		#define MASS_STORAGE_IO_EPSIZE         64
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t    Config;
+
+			// CDC Control Interface
+			USB_Descriptor_Interface_Association_t   CDC_IAD;
+			USB_Descriptor_Interface_t               CDC_CCI_Interface;
+			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
+			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
+			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
+			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
+
+			// CDC Data Interface
+			USB_Descriptor_Interface_t               CDC_DCI_Interface;
+			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
+			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
+
+			// Mass Storage Interface
+			USB_Descriptor_Interface_t               MS_Interface;
+			USB_Descriptor_Endpoint_t                MS_DataInEndpoint;
+			USB_Descriptor_Endpoint_t                MS_DataOutEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_CDC_CCI     = 0, /**< CDC CCI interface descriptor ID */
+			INTERFACE_ID_CDC_DCI     = 1, /**< CDC DCI interface descriptor ID */
+			INTERFACE_ID_MassStorage = 2, /**< Mass storage interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/LUFA VirtualSerialMassStorage.inf b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/LUFA VirtualSerialMassStorage.inf
new file mode 100644
index 000000000..e5d8da5e3
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/LUFA VirtualSerialMassStorage.inf
@@ -0,0 +1,66 @@
+;************************************************************
+; Windows USB CDC ACM Setup File
+; Copyright (c) 2000 Microsoft Corporation
+;************************************************************
+
+[DefaultInstall]
+CopyINF="LUFA VirtualSerialMassStorage.inf"
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%MFGNAME%
+DriverVer=7/1/2012,10.0.0.0
+
+[Manufacturer]
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
+
+[SourceDisksNames]
+
+[SourceDisksFiles]
+
+[DestinationDirs]
+DefaultDestDir=12
+
+[DriverInstall]
+Include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.AddReg
+
+[DriverInstall.Services]
+Include=mdmcpq.inf
+AddService=usbser, 0x00000002, LowerFilter_Service_Inst
+
+[DriverInstall.AddReg]
+HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
+
+;------------------------------------------------------------------------------
+;  Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID.  Use the format as shown below.
+; Note: One INF file can be used for multiple devices with different VID and PIDs.
+; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2068&MI_00
+
+[DeviceList.NTx86]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2068&MI_00
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2068&MI_00
+
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2068&MI_00
+
+;------------------------------------------------------------------------------
+;  String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+MFGNAME="http://www.lufa-lib.org"
+DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"
\ No newline at end of file
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.c b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.c
new file mode 100644
index 000000000..c0fd16ccc
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.c
@@ -0,0 +1,534 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Functions to manage the physical Dataflash media, including reading and writing of
+ *  blocks of data. These functions are called by the SCSI layer when data must be stored
+ *  or retrieved to/from the physical storage media. If a different media is used (such
+ *  as a SD card or EEPROM), functions similar to these will need to be generated.
+ */
+
+#define  INCLUDE_FROM_DATAFLASHMANAGER_C
+#include "DataflashManager.h"
+
+/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
+ *  the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes
+ *  them to the Dataflash in Dataflash page sized blocks.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
+ *  \param[in] BlockAddress  Data block starting address for the write sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to write
+ */
+void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+                                  const uint32_t BlockAddress,
+                                  uint16_t TotalBlocks)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+	bool     UsingSecondBuffer   = false;
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+	/* Copy selected dataflash's current page contents to the Dataflash buffer */
+	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
+	Dataflash_SendAddressBytes(CurrDFPage, 0);
+	Dataflash_WaitWhileBusy();
+#endif
+
+	/* Send the Dataflash buffer write command */
+	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
+	Dataflash_SendAddressBytes(0, CurrDFPageByte);
+
+	/* Wait until endpoint is ready before continuing */
+	if (Endpoint_WaitUntilReady())
+	  return;
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Write an endpoint packet sized data block to the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if the endpoint is currently empty */
+			if (!(Endpoint_IsReadWriteAllowed()))
+			{
+				/* Clear the current endpoint bank */
+				Endpoint_ClearOUT();
+
+				/* Wait until the host has sent another packet */
+				if (Endpoint_WaitUntilReady())
+				  return;
+			}
+
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Write the Dataflash buffer contents back to the Dataflash page */
+				Dataflash_WaitWhileBusy();
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
+				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
+				  UsingSecondBuffer = !(UsingSecondBuffer);
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
+				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
+				{
+					/* Copy selected dataflash's current page contents to the Dataflash buffer */
+					Dataflash_WaitWhileBusy();
+					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
+					Dataflash_SendAddressBytes(CurrDFPage, 0);
+					Dataflash_WaitWhileBusy();
+				}
+#endif
+
+				/* Send the Dataflash buffer write command */
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
+				Dataflash_SendAddressBytes(0, 0);
+			}
+
+			/* Write one 16-byte chunk of data to the Dataflash */
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+
+			/* Check if the current command is being aborted by the host */
+			if (MSInterfaceInfo->State.IsMassStoreReset)
+			  return;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* Write the Dataflash buffer contents back to the Dataflash page */
+	Dataflash_WaitWhileBusy();
+	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
+	Dataflash_WaitWhileBusy();
+
+	/* If the endpoint is empty, clear it ready for the next packet from the host */
+	if (!(Endpoint_IsReadWriteAllowed()))
+	  Endpoint_ClearOUT();
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
+ *  the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash
+ *  and writes them in OS sized blocks to the endpoint.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
+ *  \param[in] BlockAddress  Data block starting address for the read sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to read
+ */
+void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+                                 const uint32_t BlockAddress,
+                                 uint16_t TotalBlocks)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+	/* Send the Dataflash main memory page read command */
+	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+
+	/* Wait until endpoint is ready before continuing */
+	if (Endpoint_WaitUntilReady())
+	  return;
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Read an endpoint packet sized data block from the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if the endpoint is currently full */
+			if (!(Endpoint_IsReadWriteAllowed()))
+			{
+				/* Clear the endpoint bank to send its contents to the host */
+				Endpoint_ClearIN();
+
+				/* Wait until the endpoint is ready for more data */
+				if (Endpoint_WaitUntilReady())
+				  return;
+			}
+
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+				/* Send the Dataflash main memory page read command */
+				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+			}
+
+			/* Read one 16-byte chunk of data from the Dataflash */
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+
+			/* Check if the current command is being aborted by the host */
+			if (MSInterfaceInfo->State.IsMassStoreReset)
+			  return;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* If the endpoint is full, send its contents to the host */
+	if (!(Endpoint_IsReadWriteAllowed()))
+	  Endpoint_ClearIN();
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
+ *  the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the
+ *  Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
+ *  Dataflash.
+ *
+ *  \param[in] BlockAddress  Data block starting address for the write sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to write
+ *  \param[in] BufferPtr     Pointer to the data source RAM buffer
+ */
+void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
+                                      uint16_t TotalBlocks,
+                                      uint8_t* BufferPtr)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+	bool     UsingSecondBuffer   = false;
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+	/* Copy selected dataflash's current page contents to the Dataflash buffer */
+	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
+	Dataflash_SendAddressBytes(CurrDFPage, 0);
+	Dataflash_WaitWhileBusy();
+#endif
+
+	/* Send the Dataflash buffer write command */
+	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
+	Dataflash_SendAddressBytes(0, CurrDFPageByte);
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Write an endpoint packet sized data block to the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Write the Dataflash buffer contents back to the Dataflash page */
+				Dataflash_WaitWhileBusy();
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
+				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
+				  UsingSecondBuffer = !(UsingSecondBuffer);
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
+				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
+				{
+					/* Copy selected dataflash's current page contents to the Dataflash buffer */
+					Dataflash_WaitWhileBusy();
+					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
+					Dataflash_SendAddressBytes(CurrDFPage, 0);
+					Dataflash_WaitWhileBusy();
+				}
+#endif
+
+				/* Send the Dataflash buffer write command */
+				Dataflash_ToggleSelectedChipCS();
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
+				Dataflash_SendAddressBytes(0, 0);
+			}
+
+			/* Write one 16-byte chunk of data to the Dataflash */
+			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
+			  Dataflash_SendByte(*(BufferPtr++));
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* Write the Dataflash buffer contents back to the Dataflash page */
+	Dataflash_WaitWhileBusy();
+	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
+	Dataflash_WaitWhileBusy();
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
+ *  the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash
+ *  and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read
+ *  the files stored on the Dataflash.
+ *
+ *  \param[in] BlockAddress  Data block starting address for the read sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to read
+ *  \param[out] BufferPtr    Pointer to the data destination RAM buffer
+ */
+void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
+                                     uint16_t TotalBlocks,
+                                     uint8_t* BufferPtr)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+	/* Send the Dataflash main memory page read command */
+	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Read an endpoint packet sized data block from the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+				/* Send the Dataflash main memory page read command */
+				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+			}
+
+			/* Read one 16-byte chunk of data from the Dataflash */
+			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
+			  *(BufferPtr++) = Dataflash_ReceiveByte();
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
+void DataflashManager_ResetDataflashProtections(void)
+{
+	/* Select first Dataflash chip, send the read status register command */
+	Dataflash_SelectChip(DATAFLASH_CHIP1);
+	Dataflash_SendByte(DF_CMD_GETSTATUS);
+
+	/* Check if sector protection is enabled */
+	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
+	{
+		Dataflash_ToggleSelectedChipCS();
+
+		/* Send the commands to disable sector protection */
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
+	}
+
+	/* Select second Dataflash chip (if present on selected board), send read status register command */
+	#if (DATAFLASH_TOTALCHIPS == 2)
+	Dataflash_SelectChip(DATAFLASH_CHIP2);
+	Dataflash_SendByte(DF_CMD_GETSTATUS);
+
+	/* Check if sector protection is enabled */
+	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
+	{
+		Dataflash_ToggleSelectedChipCS();
+
+		/* Send the commands to disable sector protection */
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
+	}
+	#endif
+
+	/* Deselect current Dataflash chip */
+	Dataflash_DeselectChip();
+}
+
+/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working.
+ *
+ *  \return Boolean \c true if all media chips are working, \c false otherwise
+ */
+bool DataflashManager_CheckDataflashOperation(void)
+{
+	uint8_t ReturnByte;
+
+	/* Test first Dataflash IC is present and responding to commands */
+	Dataflash_SelectChip(DATAFLASH_CHIP1);
+	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
+	ReturnByte = Dataflash_ReceiveByte();
+	Dataflash_DeselectChip();
+
+	/* If returned data is invalid, fail the command */
+	if (ReturnByte != DF_MANUFACTURER_ATMEL)
+	  return false;
+
+	#if (DATAFLASH_TOTALCHIPS == 2)
+	/* Test second Dataflash IC is present and responding to commands */
+	Dataflash_SelectChip(DATAFLASH_CHIP2);
+	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
+	ReturnByte = Dataflash_ReceiveByte();
+	Dataflash_DeselectChip();
+
+	/* If returned data is invalid, fail the command */
+	if (ReturnByte != DF_MANUFACTURER_ATMEL)
+	  return false;
+	#endif
+
+	return true;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h
new file mode 100644
index 000000000..e44e61835
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h
@@ -0,0 +1,89 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for DataflashManager.c.
+ */
+
+#ifndef _DATAFLASH_MANAGER_H_
+#define _DATAFLASH_MANAGER_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+
+		#include "../VirtualSerialMassStorage.h"
+		#include "../Descriptors.h"
+		#include "Config/AppConfig.h"
+
+		#include <LUFA/Common/Common.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/Dataflash.h>
+
+	/* Preprocessor Checks: */
+		#if (DATAFLASH_PAGE_SIZE % 16)
+			#error Dataflash page size must be a multiple of 16 bytes.
+		#endif
+
+	/* Defines: */
+		/** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */
+		#define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
+
+		/** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
+		 *  storage media (Dataflash) using a different native block size. Do not change this value.
+		 */
+		#define VIRTUAL_MEMORY_BLOCK_SIZE           512
+
+		/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not
+		 *  change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size.
+		 */
+		#define VIRTUAL_MEMORY_BLOCKS               (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
+
+		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
+		#define LUN_MEDIA_BLOCKS         (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
+
+	/* Function Prototypes: */
+		void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+		                                  const uint32_t BlockAddress,
+		                                  uint16_t TotalBlocks);
+		void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+		                                 const uint32_t BlockAddress,
+		                                 uint16_t TotalBlocks);
+		void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
+		                                      uint16_t TotalBlocks,
+		                                      uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
+		void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
+		                                     uint16_t TotalBlocks,
+		                                     uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
+		void DataflashManager_ResetDataflashProtections(void);
+		bool DataflashManager_CheckDataflashOperation(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.c b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.c
new file mode 100644
index 000000000..8780d1603
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.c
@@ -0,0 +1,349 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  SCSI command processing routines, for SCSI commands issued by the host. Mass Storage
+ *  devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information,
+ *  which wrap around standard SCSI device commands for controlling the actual storage medium.
+ */
+
+#define  INCLUDE_FROM_SCSI_C
+#include "SCSI.h"
+
+/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
+ *  features and capabilities.
+ */
+static const SCSI_Inquiry_Response_t InquiryData =
+	{
+		.DeviceType          = DEVICE_TYPE_BLOCK,
+		.PeripheralQualifier = 0,
+
+		.Removable           = true,
+
+		.Version             = 0,
+
+		.ResponseDataFormat  = 2,
+		.NormACA             = false,
+		.TrmTsk              = false,
+		.AERC                = false,
+
+		.AdditionalLength    = 0x1F,
+
+		.SoftReset           = false,
+		.CmdQue              = false,
+		.Linked              = false,
+		.Sync                = false,
+		.WideBus16Bit        = false,
+		.WideBus32Bit        = false,
+		.RelAddr             = false,
+
+		.VendorID            = "LUFA",
+		.ProductID           = "Dataflash Disk",
+		.RevisionID          = {'0','.','0','0'},
+	};
+
+/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE
+ *  command is issued. This gives information on exactly why the last command failed to complete.
+ */
+static SCSI_Request_Sense_Response_t SenseData =
+	{
+		.ResponseCode        = 0x70,
+		.AdditionalLength    = 0x0A,
+	};
+
+
+/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches
+ *  to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns
+ *  a command failure due to a ILLEGAL REQUEST.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise
+ */
+bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	bool CommandSuccess = false;
+
+	/* Run the appropriate SCSI command hander function based on the passed command */
+	switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0])
+	{
+		case SCSI_CMD_INQUIRY:
+			CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_REQUEST_SENSE:
+			CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_READ_CAPACITY_10:
+			CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_SEND_DIAGNOSTIC:
+			CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_WRITE_10:
+			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE);
+			break;
+		case SCSI_CMD_READ_10:
+			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ);
+			break;
+		case SCSI_CMD_MODE_SENSE_6:
+			CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo);
+			break;
+		case SCSI_CMD_START_STOP_UNIT:
+		case SCSI_CMD_TEST_UNIT_READY:
+		case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
+		case SCSI_CMD_VERIFY_10:
+			/* These commands should just succeed, no handling required */
+			CommandSuccess = true;
+			MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
+			break;
+		default:
+			/* Update the SENSE key to reflect the invalid command */
+			SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		                   SCSI_ASENSE_INVALID_COMMAND,
+		                   SCSI_ASENSEQ_NO_QUALIFIER);
+			break;
+	}
+
+	/* Check if command was successfully processed */
+	if (CommandSuccess)
+	{
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD,
+		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return true;
+	}
+
+	return false;
+}
+
+/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features
+ *  and capabilities to the host.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	uint16_t AllocationLength  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]);
+	uint16_t BytesTransferred  = MIN(AllocationLength, sizeof(InquiryData));
+
+	/* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */
+	if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||
+	     MSInterfaceInfo->State.CommandBlock.SCSICommandData[2])
+	{
+		/* Optional but unsupported bits set - update the SENSE key and fail the request */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL);
+
+	/* Pad out remaining bytes with 0x00 */
+	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
+
+	/* Finalize the stream transfer to send the last packet */
+	Endpoint_ClearIN();
+
+	/* Succeed the command and update the bytes transferred counter */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command,
+ *  including the error code and additional error information so that the host can determine why a command failed to complete.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	uint8_t  AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];
+	uint8_t  BytesTransferred = MIN(AllocationLength, sizeof(SenseData));
+
+	Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL);
+	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
+	Endpoint_ClearIN();
+
+	/* Succeed the command and update the bytes transferred counter */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity
+ *  on the selected Logical Unit (drive), as a number of OS-sized blocks.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	uint32_t LastBlockAddressInLUN = (LUN_MEDIA_BLOCKS - 1);
+	uint32_t MediaBlockSize        = VIRTUAL_MEMORY_BLOCK_SIZE;
+
+	Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL);
+	Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL);
+	Endpoint_ClearIN();
+
+	/* Succeed the command and update the bytes transferred counter */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the
+ *  board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is
+ *  supported.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	/* Check to see if the SELF TEST bit is not set */
+	if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2)))
+	{
+		/* Only self-test supported - update SENSE key and fail the command */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	/* Check to see if all attached Dataflash ICs are functional */
+	if (!(DataflashManager_CheckDataflashOperation()))
+	{
+		/* Update SENSE key with a hardware error condition and return command fail */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR,
+		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	/* Succeed the command and update the bytes transferred counter */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address
+ *  and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual
+ *  reading and writing of the data.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *  \param[in] IsDataRead  Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+                                      const bool IsDataRead)
+{
+	uint32_t BlockAddress;
+	uint16_t TotalBlocks;
+
+	/* Check if the disk is write protected or not */
+	if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY)
+	{
+		/* Block address is invalid, update SENSE key and return command fail */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT,
+		               SCSI_ASENSE_WRITE_PROTECTED,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
+	BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);
+
+	/* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */
+	TotalBlocks  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]);
+
+	/* Check if the block address is outside the maximum allowable value for the LUN */
+	if (BlockAddress >= LUN_MEDIA_BLOCKS)
+	{
+		/* Block address is invalid, update SENSE key and return command fail */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		               SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	#if (TOTAL_LUNS > 1)
+	/* Adjust the given block address to the real media address based on the selected LUN */
+	BlockAddress += ((uint32_t)MSInterfaceInfo->State.CommandBlock.LUN * LUN_MEDIA_BLOCKS);
+	#endif
+
+	/* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
+	if (IsDataRead == DATA_READ)
+	  DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
+	else
+	  DataflashManager_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
+
+	/* Update the bytes transferred counter and succeed the command */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);
+
+	return true;
+}
+
+/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about
+ *  the SCSI device, as well as the device's Write Protect status.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	/* Send an empty header response with the Write Protect flag status */
+	Endpoint_Write_8(0x00);
+	Endpoint_Write_8(0x00);
+	Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00);
+	Endpoint_Write_8(0x00);
+	Endpoint_ClearIN();
+
+	/* Update the bytes transferred counter and succeed the command */
+	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4;
+
+	return true;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.h b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.h
new file mode 100644
index 000000000..e16c2d46d
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.h
@@ -0,0 +1,89 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for SCSI.c.
+ */
+
+#ifndef _SCSI_H_
+#define _SCSI_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include "../VirtualSerialMassStorage.h"
+		#include "../Descriptors.h"
+		#include "DataflashManager.h"
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
+		 *  is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
+		 *  the last command failure) in a quick and easy manner.
+		 *
+		 *  \param[in] Key    New SCSI sense key to set the sense code to
+		 *  \param[in] Acode  New SCSI additional sense key to set the additional sense code to
+		 *  \param[in] Aqual  New SCSI additional sense key qualifier to set the additional sense qualifier code to
+		 */
+		#define SCSI_SET_SENSE(Key, Acode, Aqual)  do { SenseData.SenseKey                 = (Key);   \
+		                                                SenseData.AdditionalSenseCode      = (Acode); \
+		                                                SenseData.AdditionalSenseQualifier = (Aqual); } while (0)
+
+		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */
+		#define DATA_READ           true
+
+		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */
+		#define DATA_WRITE          false
+
+		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */
+		#define DEVICE_TYPE_BLOCK   0x00
+
+		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */
+		#define DEVICE_TYPE_CDROM   0x05
+
+	/* Function Prototypes: */
+		bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+
+		#if defined(INCLUDE_FROM_SCSI_C)
+			static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+			static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+			static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+			static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+			static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
+			                                      const bool IsDataRead);
+			static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
+		#endif
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c
new file mode 100644
index 000000000..f298e39cb
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c
@@ -0,0 +1,257 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the VirtualSerialMassStorage demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "VirtualSerialMassStorage.h"
+
+/** LUFA CDC Class driver interface configuration and state information. This structure is
+ *  passed to all CDC Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
+	{
+		.Config =
+			{
+				.ControlInterfaceNumber         = INTERFACE_ID_CDC_CCI,
+				.DataINEndpoint                 =
+					{
+						.Address                = CDC_TX_EPADDR,
+						.Size                   = CDC_TXRX_EPSIZE,
+						.Banks                  = 1,
+					},
+				.DataOUTEndpoint                =
+					{
+						.Address                = CDC_RX_EPADDR,
+						.Size                   = CDC_TXRX_EPSIZE,
+						.Banks                  = 1,
+					},
+				.NotificationEndpoint           =
+					{
+						.Address                = CDC_NOTIFICATION_EPADDR,
+						.Size                   = CDC_NOTIFICATION_EPSIZE,
+						.Banks                  = 1,
+					},
+			},
+	};
+
+/** LUFA Mass Storage Class driver interface configuration and state information. This structure is
+ *  passed to all Mass Storage Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_MS_Device_t Disk_MS_Interface =
+	{
+		.Config =
+			{
+				.InterfaceNumber                = INTERFACE_ID_MassStorage,
+				.DataINEndpoint                 =
+					{
+						.Address                = MASS_STORAGE_IN_EPADDR,
+						.Size                   = MASS_STORAGE_IO_EPSIZE,
+						.Banks                  = 1,
+					},
+				.DataOUTEndpoint                =
+					{
+						.Address                = MASS_STORAGE_OUT_EPADDR,
+						.Size                   = MASS_STORAGE_IO_EPSIZE,
+						.Banks                  = 1,
+					},
+				.TotalLUNs                      = TOTAL_LUNS,
+			},
+	};
+
+/** Standard file stream for the CDC interface when set up, so that the virtual CDC COM port can be
+ *  used like any regular character stream in the C APIs.
+ */
+static FILE USBSerialStream;
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	/* Create a regular character stream for the interface so that it can be used with the stdio.h functions */
+	CDC_Device_CreateStream(&VirtualSerial_CDC_Interface, &USBSerialStream);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		CheckJoystickMovement();
+
+		/* Must throw away unused bytes from the host, or it will lock up while waiting for the device */
+		CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
+
+		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
+		MS_Device_USBTask(&Disk_MS_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	Joystick_Init();
+	Dataflash_Init();
+	USB_Init();
+
+	/* Check if the Dataflash is working, abort if not */
+	if (!(DataflashManager_CheckDataflashOperation()))
+	{
+		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+		for(;;);
+	}
+
+	/* Clear Dataflash sector protections, if enabled */
+	DataflashManager_ResetDataflashProtections();
+}
+
+/** Checks for changes in the position of the board joystick, sending strings to the host upon each change. */
+void CheckJoystickMovement(void)
+{
+	uint8_t     JoyStatus_LCL = Joystick_GetStatus();
+	char*       ReportString  = NULL;
+	static bool ActionSent    = false;
+
+	if (JoyStatus_LCL & JOY_UP)
+	  ReportString = "Joystick Up\r\n";
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  ReportString = "Joystick Down\r\n";
+	else if (JoyStatus_LCL & JOY_LEFT)
+	  ReportString = "Joystick Left\r\n";
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  ReportString = "Joystick Right\r\n";
+	else if (JoyStatus_LCL & JOY_PRESS)
+	  ReportString = "Joystick Pressed\r\n";
+	else
+	  ActionSent = false;
+
+	if ((ReportString != NULL) && (ActionSent == false))
+	{
+		ActionSent = true;
+
+		/* Write the string to the virtual COM port via the created character stream */
+		fputs(ReportString, &USBSerialStream);
+
+		/* Alternatively, without the stream: */
+		// CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString);
+	}
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
+	ConfigSuccess &= MS_Device_ConfigureEndpoints(&Disk_MS_Interface);
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
+	MS_Device_ProcessControlRequest(&Disk_MS_Interface);
+}
+
+/** CDC class driver callback function the processing of changes to the virtual
+ *  control lines sent from the host..
+ *
+ *  \param[in] CDCInterfaceInfo  Pointer to the CDC class interface configuration structure being referenced
+ */
+void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t *const CDCInterfaceInfo)
+{
+	/* You can get changes to the virtual CDC lines in this callback; a common
+	   use-case is to use the Data Terminal Ready (DTR) flag to enable and
+	   disable CDC communications in your application when set to avoid the
+	   application blocking while waiting for a host to become ready and read
+	   in the pending data from the USB endpoints.
+	*/
+	bool HostReady = (CDCInterfaceInfo->State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR) != 0;
+}
+
+/** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed.
+ *
+ *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface configuration structure being referenced
+ */
+bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
+{
+	bool CommandSuccess;
+
+	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+	CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo);
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+
+	return CommandSuccess;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h
new file mode 100644
index 000000000..6df452db3
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h
@@ -0,0 +1,83 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for VirtualSerial.c.
+ */
+
+#ifndef _VIRTUALSERIAL_H_
+#define _VIRTUALSERIAL_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include "Lib/SCSI.h"
+		#include "Lib/DataflashManager.h"
+		#include "Config/AppConfig.h"
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+		#define LEDMASK_USB_BUSY          LEDS_LED2
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void CheckJoystickMovement(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt
new file mode 100644
index 000000000..246775c22
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt
@@ -0,0 +1,93 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Communications Device Class (Virtual Serial Port) and Mass Storage Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC) \n
+ *        Mass Storage Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Abstract Control Model (ACM) \n
+ *        Bulk-Only Transport</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF CDC Class Standard \n
+ *        USBIF Mass Storage Standard \n
+ *        USB Bulk-Only Transport Standard \n
+ *        SCSI Primary Commands Specification \n
+ *        SCSI Block Commands Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Combined Communications Device Class/Mass Storage demonstration application.
+ *  This gives a simple reference application for implementing a combined
+ *  CDC and Mass Storage device acting as a both a virtual serial port and a flash
+ *  drive. Joystick actions are transmitted to the host as strings, and data can be
+ *  written to or read from the exposed flash drive interface in the same manner as
+ *  other USB flash drives. The device does not respond to serial data sent from the
+ *  host.
+ *
+ *  After running this demo for the first time on a new computer,
+ *  you will need to supply the .INF file located in this demo
+ *  project's directory as the device's driver when running under
+ *  Windows. This will enable Windows to use its inbuilt CDC drivers,
+ *  negating the need for custom drivers for the device. Other
+ *  Operating Systems should automatically use their own inbuilt
+ *  CDC-ACM drivers.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>TOTAL_LUNS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
+ *        this can be set to any positive non-zero amount.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>DISK_READ_ONLY</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configuration define, indicating if the disk should be write protected or not.</td>
+ *   </tr>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/asf.xml b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/asf.xml
new file mode 100644
index 000000000..a73bcc21c
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/asf.xml
@@ -0,0 +1,70 @@
+<asf xmlversion="1.0">

+	<project caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_ms.example.avr8">

+		<require idref="lufa.demos.device.class.cdc_ms"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_ms.example.xmega">

+		<require idref="lufa.demos.device.class.cdc_ms"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.cdc_ms" caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Virtual Serial and Mass Storage device demo, implementing a virtual serial channel between the host PC and the device, and a basic USB storage disk using a Dataflash memory IC. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="CDC Class"/>

+			<keyword value="Mass Storage Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="VirtualSerialMassStorage.txt"/>

+		<build type="distribute" subtype="user-file" value="LUFA VirtualSerialMassStorage.inf"/>

+

+		<build type="c-source" value="VirtualSerialMassStorage.c"/>

+		<build type="c-source" value="Lib/DataflashManager.c"/>

+		<build type="c-source" value="Lib/SCSI.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="VirtualSerialMassStorage.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+		<build type="header-file" value="Lib/DataflashManager.h"/>

+		<build type="header-file" value="Lib/SCSI.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

+		<build type="header-file" value="Config/AppConfig.h"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.joystick"/>

+		<require idref="lufa.drivers.board.dataflash"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/doxyfile b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/doxyfile
new file mode 100644
index 000000000..ff418b91d
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Virtual Serial/Mass Storage Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile
new file mode 100644
index 000000000..e40ee286f
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = VirtualSerialMassStorage
+SRC          = $(TARGET).c Descriptors.c Lib/DataflashManager.c Lib/SCSI.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/Config/LUFAConfig.h
new file mode 100644
index 000000000..0ec4635eb
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               4
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c
new file mode 100644
index 000000000..b4133d8b8
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c
@@ -0,0 +1,323 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+
+/** HID class report descriptor. This is a special descriptor constructed with values from the
+ *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
+ *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
+ *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
+ *  more details on HID report descriptors.
+ */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
+{
+	/* Use the HID class driver's standard Mouse report.
+	 *   Min X/Y Axis values: -1
+	 *   Max X/Y Axis values:  1
+	 *   Min physical X/Y Axis values (used to determine resolution): -1
+	 *   Max physical X/Y Axis values (used to determine resolution):  1
+	 *   Buttons: 3
+	 *   Absolute screen coordinates: false
+	 */
+	HID_DESCRIPTOR_MOUSE(-1, 1, -1, 1, 3, false)
+};
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_IADDeviceClass,
+	.SubClass               = USB_CSCP_IADDeviceSubclass,
+	.Protocol               = USB_CSCP_IADDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2062,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 3,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.CDC_IAD =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
+
+			.FirstInterfaceIndex    = INTERFACE_ID_CDC_CCI,
+			.TotalInterfaces        = 2,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.IADStrIndex            = NO_DESCRIPTOR
+		},
+
+	.CDC_CCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC_Functional_Header =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
+
+			.CDCSpecification       = VERSION_BCD(1,1,0),
+		},
+
+	.CDC_Functional_ACM =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
+
+			.Capabilities           = 0x06,
+		},
+
+	.CDC_Functional_Union =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
+
+			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
+			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
+		},
+
+	.CDC_NotificationEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
+			.PollingIntervalMS      = 0xFF
+		},
+
+	.CDC_DCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = CDC_CSCP_CDCDataClass,
+			.SubClass               = CDC_CSCP_NoDataSubclass,
+			.Protocol               = CDC_CSCP_NoDataProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_RX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.CDC_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_TX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.HID_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_Mouse,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_BootSubclass,
+			.Protocol               = HID_CSCP_MouseBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID_MouseHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(MouseReport)
+		},
+
+	.HID_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = MOUSE_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = MOUSE_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA CDC and Mouse Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+		case HID_DTYPE_HID:
+			Address = &ConfigurationDescriptor.HID_MouseHID;
+			Size    = sizeof(USB_HID_Descriptor_HID_t);
+			break;
+		case HID_DTYPE_Report:
+			Address = &MouseReport;
+			Size    = sizeof(MouseReport);
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h
new file mode 100644
index 000000000..85c1e2c96
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h
@@ -0,0 +1,123 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Macros: */
+		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 2)
+
+		/** Endpoint address of the CDC device-to-host data IN endpoint. */
+		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 3)
+
+		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
+		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 4)
+
+		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPSIZE        8
+
+		/** Size in bytes of the CDC data IN and OUT endpoints. */
+		#define CDC_TXRX_EPSIZE                16
+
+		/** Endpoint address of the Mouse HID reporting IN endpoint. */
+		#define MOUSE_EPADDR                   (ENDPOINT_DIR_IN  | 1)
+
+		/** Size in bytes of the Mouse HID reporting IN endpoint. */
+		#define MOUSE_EPSIZE                   8
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t    Config;
+
+			// CDC Control Interface
+			USB_Descriptor_Interface_Association_t   CDC_IAD;
+			USB_Descriptor_Interface_t               CDC_CCI_Interface;
+			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
+			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
+			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
+			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
+
+			// CDC Data Interface
+			USB_Descriptor_Interface_t               CDC_DCI_Interface;
+			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
+			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
+
+			// Mouse HID Interface
+			USB_Descriptor_Interface_t               HID_Interface;
+			USB_HID_Descriptor_HID_t                 HID_MouseHID;
+	        USB_Descriptor_Endpoint_t                HID_ReportINEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
+			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
+			INTERFACE_ID_Mouse   = 2, /**< Mouse interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/LUFA VirtualSerialMouse.inf b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/LUFA VirtualSerialMouse.inf
new file mode 100644
index 000000000..ac47e066b
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/LUFA VirtualSerialMouse.inf
@@ -0,0 +1,66 @@
+;************************************************************
+; Windows USB CDC ACM Setup File
+; Copyright (c) 2000 Microsoft Corporation
+;************************************************************
+
+[DefaultInstall]
+CopyINF="LUFA VirtualSerialMouse.inf"
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%MFGNAME%
+DriverVer=7/1/2012,10.0.0.0
+
+[Manufacturer]
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
+
+[SourceDisksNames]
+
+[SourceDisksFiles]
+
+[DestinationDirs]
+DefaultDestDir=12
+
+[DriverInstall]
+Include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.AddReg
+
+[DriverInstall.Services]
+Include=mdmcpq.inf
+AddService=usbser, 0x00000002, LowerFilter_Service_Inst
+
+[DriverInstall.AddReg]
+HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
+
+;------------------------------------------------------------------------------
+;  Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID.  Use the format as shown below.
+; Note: One INF file can be used for multiple devices with different VID and PIDs.
+; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2062&MI_00
+
+[DeviceList.NTx86]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2062&MI_00
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2062&MI_00
+
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2062&MI_00
+
+;------------------------------------------------------------------------------
+;  String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+MFGNAME="http://www.lufa-lib.org"
+DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"
\ No newline at end of file
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c
new file mode 100644
index 000000000..134958060
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c
@@ -0,0 +1,282 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the VirtualSerialMouse demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "VirtualSerialMouse.h"
+
+/** LUFA CDC Class driver interface configuration and state information. This structure is
+ *  passed to all CDC Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
+	{
+		.Config =
+			{
+				.ControlInterfaceNumber         = INTERFACE_ID_CDC_CCI,
+				.DataINEndpoint                 =
+					{
+						.Address                = CDC_TX_EPADDR,
+						.Size                   = CDC_TXRX_EPSIZE,
+						.Banks                  = 1,
+					},
+				.DataOUTEndpoint                =
+					{
+						.Address                = CDC_RX_EPADDR,
+						.Size                   = CDC_TXRX_EPSIZE,
+						.Banks                  = 1,
+					},
+				.NotificationEndpoint           =
+					{
+						.Address                = CDC_NOTIFICATION_EPADDR,
+						.Size                   = CDC_NOTIFICATION_EPSIZE,
+						.Banks                  = 1,
+					},
+			},
+	};
+
+/** Buffer to hold the previously generated Mouse HID report, for comparison purposes inside the HID class driver. */
+static uint8_t PrevMouseHIDReportBuffer[sizeof(USB_MouseReport_Data_t)];
+
+/** LUFA HID Class driver interface configuration and state information. This structure is
+ *  passed to all HID Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_HID_Device_t Mouse_HID_Interface =
+	{
+		.Config =
+			{
+				.InterfaceNumber                = INTERFACE_ID_Mouse,
+				.ReportINEndpoint               =
+					{
+						.Address                = MOUSE_EPADDR,
+						.Size                   = MOUSE_EPSIZE,
+						.Banks                  = 1,
+					},
+				.PrevReportINBuffer             = PrevMouseHIDReportBuffer,
+				.PrevReportINBufferSize         = sizeof(PrevMouseHIDReportBuffer),
+			},
+	};
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		CheckJoystickMovement();
+
+		/* Must throw away unused bytes from the host, or it will lock up while waiting for the device */
+		CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
+
+		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
+		HID_Device_USBTask(&Mouse_HID_Interface);
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Checks for changes in the position of the board joystick, sending strings to the host upon each change. */
+void CheckJoystickMovement(void)
+{
+	uint8_t     JoyStatus_LCL = Joystick_GetStatus();
+	char*       ReportString  = NULL;
+	static bool ActionSent    = false;
+
+	if (JoyStatus_LCL & JOY_UP)
+	  ReportString = "Joystick Up\r\n";
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  ReportString = "Joystick Down\r\n";
+	else if (JoyStatus_LCL & JOY_LEFT)
+	  ReportString = "Joystick Left\r\n";
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  ReportString = "Joystick Right\r\n";
+	else if (JoyStatus_LCL & JOY_PRESS)
+	  ReportString = "Joystick Pressed\r\n";
+	else
+	  ActionSent = false;
+
+	if ((ReportString != NULL) && (ActionSent == false))
+	{
+		ActionSent = true;
+
+		CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString);
+	}
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Mouse_HID_Interface);
+	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
+
+	USB_Device_EnableSOFEvents();
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
+	HID_Device_ProcessControlRequest(&Mouse_HID_Interface);
+}
+
+/** Event handler for the USB device Start Of Frame event. */
+void EVENT_USB_Device_StartOfFrame(void)
+{
+	HID_Device_MillisecondElapsed(&Mouse_HID_Interface);
+}
+
+/** HID class driver callback function for the creation of HID reports to the host.
+ *
+ *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
+ *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
+ *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
+ *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
+ *
+ *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
+ */
+bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                         uint8_t* const ReportID,
+                                         const uint8_t ReportType,
+                                         void* ReportData,
+                                         uint16_t* const ReportSize)
+{
+	USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData;
+
+	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
+	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
+
+	if (JoyStatus_LCL & JOY_UP)
+	  MouseReport->Y = -1;
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  MouseReport->Y =  1;
+
+	if (JoyStatus_LCL & JOY_LEFT)
+	  MouseReport->X = -1;
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  MouseReport->X =  1;
+
+	if (JoyStatus_LCL & JOY_PRESS)
+	  MouseReport->Button |= (1 << 0);
+
+	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
+	  MouseReport->Button |= (1 << 1);
+
+	*ReportSize = sizeof(USB_MouseReport_Data_t);
+	return true;
+}
+
+/** HID class driver callback function for the processing of HID reports from the host.
+ *
+ *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
+ *  \param[in] ReportID    Report ID of the received report from the host
+ *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
+ *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
+ *  \param[in] ReportSize  Size in bytes of the received HID report
+ */
+void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+                                          const uint8_t ReportID,
+                                          const uint8_t ReportType,
+                                          const void* ReportData,
+                                          const uint16_t ReportSize)
+{
+	// Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports
+}
+
+/** CDC class driver callback function the processing of changes to the virtual
+ *  control lines sent from the host..
+ *
+ *  \param[in] CDCInterfaceInfo  Pointer to the CDC class interface configuration structure being referenced
+ */
+void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t *const CDCInterfaceInfo)
+{
+	/* You can get changes to the virtual CDC lines in this callback; a common
+	   use-case is to use the Data Terminal Ready (DTR) flag to enable and
+	   disable CDC communications in your application when set to avoid the
+	   application blocking while waiting for a host to become ready and read
+	   in the pending data from the USB endpoints.
+	*/
+	bool HostReady = (CDCInterfaceInfo->State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR) != 0;
+}
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h
new file mode 100644
index 000000000..0b8a03568
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h
@@ -0,0 +1,88 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for VirtualSerialMouse.c.
+ */
+
+#ifndef _VIRTUALSERIAL_MOUSE_H_
+#define _VIRTUALSERIAL_MOUSE_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void CheckJoystickMovement(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+		void EVENT_USB_Device_StartOfFrame(void);
+
+		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                         uint8_t* const ReportID,
+		                                         const uint8_t ReportType,
+		                                         void* ReportData,
+		                                         uint16_t* const ReportSize);
+		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
+		                                          const uint8_t ReportID,
+		                                          const uint8_t ReportType,
+		                                          const void* ReportData,
+		                                          const uint16_t ReportSize);
+#endif
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt
new file mode 100644
index 000000000..97ba8714e
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt
@@ -0,0 +1,79 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Combined Communications Device Class (Virtual Serial Port) and Mouse Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC) \n
+ *        Human Interface Device Class (HID)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Abstract Control Model (ACM) \n
+ *        Mouse Subclass</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF CDC Class Standard</td>
+ *    <td>USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Combined Communications Device Class/Mouse demonstration application.
+ *  This gives a simple reference application for implementing a combined
+ *  CDC and HID device acting as a both a virtual serial port and a mouse.
+ *  Joystick actions are transmitted to the host as strings and as mouse
+ *  movements. The device does not respond to serial data sent from the host.
+ *
+ *  After running this demo for the first time on a new computer,
+ *  you will need to supply the .INF file located in this demo
+ *  project's directory as the device's driver when running under
+ *  Windows. This will enable Windows to use its inbuilt CDC drivers,
+ *  negating the need for custom drivers for the device. Other
+ *  Operating Systems should automatically use their own inbuilt
+ *  CDC-ACM drivers.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/asf.xml b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/asf.xml
new file mode 100644
index 000000000..40d13050b
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/asf.xml
@@ -0,0 +1,64 @@
+<asf xmlversion="1.0">

+	<project caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_mouse.example.avr8">

+		<require idref="lufa.demos.device.class.cdc_mouse"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_mouse.example.xmega">

+		<require idref="lufa.demos.device.class.cdc_mouse"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.class.cdc_mouse" caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)">

+		<info type="description" value="summary">

+		Virtual Serial and Mouse device demo, implementing a virtual serial channel between the host PC and the device, and a USB mouse. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Class Driver APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="CDC Class"/>

+			<keyword value="HID Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="VirtualSerialMouse.txt"/>

+		<build type="distribute" subtype="user-file" value="LUFA VirtualSerialMouse.inf"/>

+

+		<build type="c-source" value="VirtualSerialMouse.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="VirtualSerialMouse.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.buttons"/>

+		<require idref="lufa.drivers.board.joystick"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/doxyfile b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/doxyfile
new file mode 100644
index 000000000..36c6a6ecc
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Combined Virtual Serial and Mouse Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
new file mode 100644
index 000000000..5272b2b96
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = VirtualSerialMouse
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/ClassDriver/makefile b/lib/lufa/Demos/Device/ClassDriver/makefile
new file mode 100644
index 000000000..a713c9d4c
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/makefile
@@ -0,0 +1,46 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+
+# Makefile to build all the LUFA Device Demos. Call with "make all" to
+# rebuild all Device demos.
+
+# Projects are pre-cleaned before each one is built, to ensure any
+# custom LUFA library build options are reflected in the compiled
+# code.
+
+PROJECT_DIRECTORIES := $(shell ls -d */)
+
+# This makefile is potentially infinitely recursive if something really bad
+# happens when determining the set of project directories - hard-abort if
+# more than 10 levels deep to avoid angry emails.
+ifeq ($(MAKELEVEL), 10)
+   $(error EMERGENCY ABORT: INFINITE RECURSION DETECTED)
+endif
+
+# Need to special-case building without a per-project object directory
+ifeq ($(OBJDIR),)
+   # If no target specified, force "clean all" and disallow parallel build
+   ifeq ($(MAKECMDGOALS),)
+      MAKECMDGOALS := clean all
+      .NOTPARALLEL:
+   endif
+
+   # If one of the targets is to build, force "clean" beforehand and disallow parallel build
+   ifneq ($(findstring all, $(MAKECMDGOALS)),)
+      MAKECMDGOALS := clean $(MAKECMDGOALS)
+      .NOTPARALLEL:
+   endif
+endif
+
+%: $(PROJECT_DIRECTORIES)
+	@echo . > /dev/null
+
+$(PROJECT_DIRECTORIES):
+	@$(MAKE) -C $@ $(MAKECMDGOALS)
+
+.PHONY: $(PROJECT_DIRECTORIES)
diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h
new file mode 100644
index 000000000..0ec4635eb
--- /dev/null
+++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               4
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c
new file mode 100644
index 000000000..96596c161
--- /dev/null
+++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c
@@ -0,0 +1,205 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Peter Lawrence (majbthrd [at] gmail [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = 0x00,
+	.SubClass               = 0x00,
+	.Protocol               = 0x00,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2065,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.TM_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_TestAndMeasurement,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 3,
+
+			.Class                  = 0xFE,
+			.SubClass               = 0x03,
+			.Protocol               = 0x01,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.TM_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = TMC_OUT_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = TMC_IO_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.TM_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = TMC_IN_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = TMC_IO_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.TM_NotificationEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = TMC_NOTIFICATION_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = TMC_NOTIFICATION_EPSIZE,
+			.PollingIntervalMS      = 0xFF
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA TMC Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h
new file mode 100644
index 000000000..628b63a50
--- /dev/null
+++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h
@@ -0,0 +1,104 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Peter Lawrence (majbthrd [at] gmail [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Macros: */
+		/** Endpoint address of the TMC notification IN endpoint. */
+		#define TMC_NOTIFICATION_EPADDR  (ENDPOINT_DIR_IN  | 2)
+
+		/** Endpoint address of the TMC device-to-host data IN endpoint. */
+		#define TMC_IN_EPADDR            (ENDPOINT_DIR_IN  | 3)
+
+		/** Endpoint address of the TMC host-to-device data OUT endpoint. */
+		#define TMC_OUT_EPADDR           (ENDPOINT_DIR_OUT | 4)
+
+		/** Size in bytes of the TMC data endpoints. */
+		#define TMC_IO_EPSIZE            64
+
+		/** Size in bytes of the TMC notification endpoint. */
+		#define TMC_NOTIFICATION_EPSIZE  8
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Test and Measurement Interface
+			USB_Descriptor_Interface_t            TM_Interface;
+			USB_Descriptor_Endpoint_t             TM_DataOutEndpoint;
+			USB_Descriptor_Endpoint_t             TM_DataInEndpoint;
+			USB_Descriptor_Endpoint_t             TM_NotificationEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_TestAndMeasurement = 0, /**< Test and measurement interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
new file mode 100644
index 000000000..c324be2d1
--- /dev/null
+++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
@@ -0,0 +1,476 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+#include "TestAndMeasurement.h"
+
+/** Contains the (usually static) capabilities of the TMC device. This table is requested by the
+ *  host upon enumeration to give it information on what features of the Test and Measurement USB
+ *  Class the device supports.
+ */
+TMC_Capabilities_t Capabilities =
+	{
+		.Status     = TMC_STATUS_SUCCESS,
+		.TMCVersion = VERSION_BCD(1.00),
+
+		.Interface  =
+			{
+				.ListenOnly             = false,
+				.TalkOnly               = false,
+				.PulseIndicateSupported = false,
+			},
+
+		.Device     =
+			{
+				.SupportsAbortINOnMatch = false,
+			},
+	};
+
+/** Current TMC control request that is being processed */
+static uint8_t RequestInProgress = 0;
+
+/** Stream callback abort flag for bulk IN data */
+static bool IsTMCBulkINReset = false;
+
+/** Stream callback abort flag for bulk OUT data */
+static bool IsTMCBulkOUTReset = false;
+
+/** Last used tag value for data transfers */
+static uint8_t CurrentTransferTag = 0;
+
+/** Length of last data transfer, for reporting to the host in case an in-progress transfer is aborted */
+static uint16_t LastTransferLength = 0;
+
+/** Buffer to hold the next message to sent to the TMC host */
+static uint8_t NextResponseBuffer[64];
+
+/** Indicates the length of the next response to send */
+static uint8_t NextResponseLen;
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		TMC_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs and stops the USB management and CDC management tasks.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
+ *  of the USB device after enumeration - the device endpoints are configured and the CDC management task started.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup TMC In, Out and Notification Endpoints */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, TMC_IO_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_IN_EPADDR,  EP_TYPE_BULK, TMC_IO_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_OUT_EPADDR, EP_TYPE_BULK, TMC_IO_EPSIZE, 1);
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	uint8_t TMCRequestStatus = TMC_STATUS_SUCCESS;
+
+	/* Process TMC specific control requests */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case Req_InitiateAbortBulkOut:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
+			{
+				/* Check that no split transaction is already in progress and the data transfer tag is valid */
+				if (RequestInProgress != 0)
+				{
+					TMCRequestStatus = TMC_STATUS_SPLIT_IN_PROGRESS;
+				}
+				else if (USB_ControlRequest.wValue != CurrentTransferTag)
+				{
+					TMCRequestStatus = TMC_STATUS_TRANSFER_NOT_IN_PROGRESS;
+				}
+				else
+				{
+					/* Indicate that all in-progress/pending data OUT requests should be aborted */
+					IsTMCBulkOUTReset = true;
+
+					/* Save the split request for later checking when a new request is received */
+					RequestInProgress = Req_InitiateAbortBulkOut;
+				}
+
+				Endpoint_ClearSETUP();
+
+				/* Write the request response byte */
+				Endpoint_Write_8(TMCRequestStatus);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case Req_CheckAbortBulkOutStatus:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
+			{
+				/* Check that an ABORT BULK OUT transaction has been requested and that the request has completed */
+				if (RequestInProgress != Req_InitiateAbortBulkOut)
+				  TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS;
+				else if (IsTMCBulkOUTReset)
+				  TMCRequestStatus = TMC_STATUS_PENDING;
+				else
+				  RequestInProgress = 0;
+
+				Endpoint_ClearSETUP();
+
+				/* Write the request response bytes */
+				Endpoint_Write_8(TMCRequestStatus);
+				Endpoint_Write_16_LE(0);
+				Endpoint_Write_32_LE(LastTransferLength);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case Req_InitiateAbortBulkIn:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
+			{
+				/* Check that no split transaction is already in progress and the data transfer tag is valid */
+				if (RequestInProgress != 0)
+				{
+					TMCRequestStatus = TMC_STATUS_SPLIT_IN_PROGRESS;
+				}
+				else if (USB_ControlRequest.wValue != CurrentTransferTag)
+				{
+					TMCRequestStatus = TMC_STATUS_TRANSFER_NOT_IN_PROGRESS;
+				}
+				else
+				{
+					/* Indicate that all in-progress/pending data IN requests should be aborted */
+					IsTMCBulkINReset = true;
+
+					/* Save the split request for later checking when a new request is received */
+					RequestInProgress = Req_InitiateAbortBulkIn;
+				}
+
+				Endpoint_ClearSETUP();
+
+				/* Write the request response bytes */
+				Endpoint_Write_8(TMCRequestStatus);
+				Endpoint_Write_8(CurrentTransferTag);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case Req_CheckAbortBulkInStatus:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
+			{
+				/* Check that an ABORT BULK IN transaction has been requested and that the request has completed */
+				if (RequestInProgress != Req_InitiateAbortBulkIn)
+				  TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS;
+				else if (IsTMCBulkINReset)
+				  TMCRequestStatus = TMC_STATUS_PENDING;
+				else
+				  RequestInProgress = 0;
+
+				Endpoint_ClearSETUP();
+
+				/* Write the request response bytes */
+				Endpoint_Write_8(TMCRequestStatus);
+				Endpoint_Write_16_LE(0);
+				Endpoint_Write_32_LE(LastTransferLength);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case Req_InitiateClear:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				/* Check that no split transaction is already in progress */
+				if (RequestInProgress != 0)
+				{
+					Endpoint_Write_8(TMC_STATUS_SPLIT_IN_PROGRESS);
+				}
+				else
+				{
+					/* Indicate that all in-progress/pending data IN and OUT requests should be aborted */
+					IsTMCBulkINReset  = true;
+					IsTMCBulkOUTReset = true;
+
+					/* Save the split request for later checking when a new request is received */
+					RequestInProgress = Req_InitiateClear;
+				}
+
+				Endpoint_ClearSETUP();
+
+				/* Write the request response byte */
+				Endpoint_Write_8(TMCRequestStatus);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case Req_CheckClearStatus:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				/* Check that a CLEAR transaction has been requested and that the request has completed */
+				if (RequestInProgress != Req_InitiateClear)
+				  TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS;
+				else if (IsTMCBulkINReset || IsTMCBulkOUTReset)
+				  TMCRequestStatus = TMC_STATUS_PENDING;
+				else
+				  RequestInProgress = 0;
+
+				Endpoint_ClearSETUP();
+
+				/* Write the request response bytes */
+				Endpoint_Write_8(TMCRequestStatus);
+				Endpoint_Write_8(0);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case Req_GetCapabilities:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Write the device capabilities to the control endpoint */
+				Endpoint_Write_Control_Stream_LE(&Capabilities, sizeof(TMC_Capabilities_t));
+				Endpoint_ClearOUT();
+			}
+
+			break;
+	}
+}
+
+void ProcessSentMessage(uint8_t* const Data, const uint8_t Length)
+{
+	if (strncmp((char*)Data, "*IDN?", 5) == 0)
+	  strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO");
+
+	NextResponseLen = strlen((char*)NextResponseBuffer);
+}
+
+uint8_t GetNextMessage(uint8_t* const Data)
+{
+	  strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO");
+
+	NextResponseLen = strlen((char*)NextResponseBuffer);
+// ---
+	uint8_t DataLen = MIN(NextResponseLen, 64);
+
+	strlcpy((char*)Data, (char*)NextResponseBuffer, DataLen);
+
+	return DataLen;
+}
+
+/** Function to manage TMC data transmission and reception to and from the host. */
+void TMC_Task(void)
+{
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	TMC_MessageHeader_t MessageHeader;
+	uint8_t             MessagePayload[128];
+
+	/* Try to read in a TMC message from the interface, process if one is available */
+	if (ReadTMCHeader(&MessageHeader))
+	{
+		/* Indicate busy */
+		LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+
+		switch (MessageHeader.MessageID)
+		{
+			case TMC_MESSAGEID_DEV_DEP_MSG_OUT:
+				LastTransferLength = 0;
+				while (Endpoint_Read_Stream_LE(MessagePayload, MIN(MessageHeader.TransferSize, sizeof(MessagePayload)), &LastTransferLength) ==
+				       ENDPOINT_RWSTREAM_IncompleteTransfer)
+				{
+					if (IsTMCBulkOUTReset)
+					  break;
+				}
+
+				Endpoint_ClearOUT();
+
+				ProcessSentMessage(MessagePayload, LastTransferLength);
+				break;
+			case TMC_MESSAGEID_DEV_DEP_MSG_IN:
+				Endpoint_ClearOUT();
+
+				MessageHeader.TransferSize = GetNextMessage(MessagePayload);
+				MessageHeader.MessageIDSpecific.DeviceOUT.LastMessageTransaction = true;
+				WriteTMCHeader(&MessageHeader);
+
+				LastTransferLength = 0;
+				while (Endpoint_Write_Stream_LE(MessagePayload, MessageHeader.TransferSize, &LastTransferLength) ==
+				       ENDPOINT_RWSTREAM_IncompleteTransfer)
+				{
+					if (IsTMCBulkINReset)
+					  break;
+				}
+
+				Endpoint_ClearIN();
+				break;
+			default:
+				Endpoint_StallTransaction();
+				break;
+		}
+
+		LEDs_SetAllLEDs(LEDMASK_USB_READY);
+	}
+
+	/* All pending data has been processed - reset the data abort flags */
+	IsTMCBulkINReset  = false;
+	IsTMCBulkOUTReset = false;
+}
+
+/** Attempts to read in the TMC message header from the TMC interface.
+ *
+ *  \param[out] MessageHeader  Pointer to a location where the read header (if any) should be stored
+ *
+ *  \return Boolean \c true if a header was read, \c false otherwise
+ */
+bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader)
+{
+	uint16_t BytesTransferred;
+	uint8_t  ErrorCode;
+
+	/* Select the Data Out endpoint */
+	Endpoint_SelectEndpoint(TMC_OUT_EPADDR);
+
+	/* Abort if no command has been sent from the host */
+	if (!(Endpoint_IsOUTReceived()))
+	  return false;
+
+	/* Read in the header of the command from the host */
+	BytesTransferred = 0;
+	while ((ErrorCode = Endpoint_Read_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), &BytesTransferred)) ==
+	       ENDPOINT_RWSTREAM_IncompleteTransfer)
+	{
+		if (IsTMCBulkOUTReset)
+		  break;
+	}
+
+	/* Store the new command tag value for later use */
+	CurrentTransferTag = MessageHeader->Tag;
+
+	/* Indicate if the command has been aborted or not */
+	return (!(IsTMCBulkOUTReset) && (ErrorCode == ENDPOINT_RWSTREAM_NoError));
+}
+
+bool WriteTMCHeader(TMC_MessageHeader_t* const MessageHeader)
+{
+	uint16_t BytesTransferred;
+	uint8_t  ErrorCode;
+
+	/* Set the message tag of the command header */
+	MessageHeader->Tag        =  CurrentTransferTag;
+	MessageHeader->InverseTag = ~CurrentTransferTag;
+
+	/* Select the Data In endpoint */
+	Endpoint_SelectEndpoint(TMC_IN_EPADDR);
+
+	/* Send the command header to the host */
+	BytesTransferred = 0;
+	while ((ErrorCode = Endpoint_Write_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), &BytesTransferred)) ==
+	       ENDPOINT_RWSTREAM_IncompleteTransfer)
+	{
+		if (IsTMCBulkINReset)
+		  break;
+	}
+
+	/* Indicate if the command has been aborted or not */
+	return (!(IsTMCBulkINReset) && (ErrorCode == ENDPOINT_RWSTREAM_NoError));
+}
+
diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h
new file mode 100644
index 000000000..50e865bed
--- /dev/null
+++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h
@@ -0,0 +1,150 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+#ifndef _TESTANDMEASUREMENT_H_
+#define _TESTANDMEASUREMENT_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY                  LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING              (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY                    (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR                    (LEDS_LED1 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+		#define LEDMASK_USB_BUSY                      LEDS_LED2
+
+		#define Req_InitiateAbortBulkOut              0x01
+		#define Req_CheckAbortBulkOutStatus           0x02
+		#define Req_InitiateAbortBulkIn               0x03
+		#define Req_CheckAbortBulkInStatus            0x04
+		#define Req_InitiateClear                     0x05
+		#define Req_CheckClearStatus                  0x06
+		#define Req_GetCapabilities                   0x07
+		#define Req_IndicatorPulse                    0x40
+
+		#define TMC_STATUS_SUCCESS                    0x01
+		#define TMC_STATUS_PENDING                    0x02
+		#define TMC_STATUS_FAILED                     0x80
+		#define TMC_STATUS_TRANSFER_NOT_IN_PROGRESS   0x81
+		#define TMC_STATUS_SPLIT_NOT_IN_PROGRESS      0x82
+		#define TMC_STATUS_SPLIT_IN_PROGRESS          0x83
+
+		#define TMC_MESSAGEID_DEV_DEP_MSG_OUT         0x01
+		#define TMC_MESSAGEID_DEV_DEP_MSG_IN          0x02
+		#define TMC_MESSAGEID_DEV_VENDOR_OUT          0x7E
+		#define TMC_MESSAGEID_DEV_VENDOR_IN           0x7F
+
+	/* Type Defines */
+		typedef struct
+		{
+			uint8_t  Status;
+			uint8_t  Reserved;
+
+			uint16_t TMCVersion;
+
+			struct
+			{
+				unsigned ListenOnly             : 1;
+				unsigned TalkOnly               : 1;
+				unsigned PulseIndicateSupported : 1;
+				unsigned Reserved               : 5;
+			} Interface;
+
+			struct
+			{
+				unsigned SupportsAbortINOnMatch : 1;
+				unsigned Reserved               : 7;
+			} Device;
+
+			uint8_t Reserved2[6];
+			uint8_t Reserved3[12];
+		} TMC_Capabilities_t;
+
+		typedef struct
+		{
+			uint8_t LastMessageTransaction;
+			uint8_t TermChar;
+			uint8_t Reserved[2];
+		} TMC_DevOUTMessageHeader_t;
+
+		typedef struct
+		{
+			uint8_t LastMessageTransaction;
+			uint8_t Reserved[3];
+		} TMC_DevINMessageHeader_t;
+
+		typedef struct
+		{
+			uint8_t  MessageID;
+			uint8_t  Tag;
+			uint8_t  InverseTag;
+			uint8_t  Reserved;
+			uint32_t TransferSize;
+
+			union
+			{
+				TMC_DevOUTMessageHeader_t DeviceOUT;
+				TMC_DevINMessageHeader_t  DeviceIN;
+				uint32_t                  VendorSpecific;
+			} MessageIDSpecific;
+		} TMC_MessageHeader_t;
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void TMC_Task(void);
+		bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader);
+		bool WriteTMCHeader(TMC_MessageHeader_t* const MessageHeader);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/makefile b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/makefile
new file mode 100644
index 000000000..e0d89ccd7
--- /dev/null
+++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = TestAndMeasurement
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioInput/AudioInput.c b/lib/lufa/Demos/Device/LowLevel/AudioInput/AudioInput.c
new file mode 100644
index 000000000..2cf241466
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioInput/AudioInput.c
@@ -0,0 +1,259 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the Audio Input demo. This file contains the main tasks of the demo and
+ *  is responsible for the initial application hardware configuration.
+ */
+
+#include "AudioInput.h"
+
+/** Flag to indicate if the streaming audio alternative interface has been selected by the host. */
+static bool StreamingAudioInterfaceSelected = false;
+
+/** Current audio sampling frequency of the streaming audio endpoint. */
+static uint32_t CurrentAudioSampleFrequency = 48000;
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	Buttons_Init();
+	ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
+	ADC_SetupChannel(MIC_IN_ADC_CHANNEL);
+	USB_Init();
+
+	/* Start the ADC conversion in free running mode */
+	ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs, and
+ *  configures the sample update and PWM timers.
+ */
+void EVENT_USB_Device_Connect(void)
+{
+	/* Indicate USB enumerating */
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+	/* Sample reload timer initialization */
+	TIMSK0  = (1 << OCIE0A);
+	OCR0A   = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
+	TCCR0A  = (1 << WGM01);  // CTC mode
+	TCCR0B  = (1 << CS01);   // Fcpu/8 speed
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs, disables the sample update and PWM output timers and stops the USB and Audio management tasks.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Stop the sample reload timer */
+	TCCR0B = 0;
+
+	/* Indicate streaming audio interface not selected */
+	StreamingAudioInterfaceSelected = false;
+
+	/* Indicate USB not ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
+ *  of the USB device after enumeration - the device endpoints are configured.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup Audio Stream Endpoint */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPADDR, EP_TYPE_ISOCHRONOUS, AUDIO_STREAM_EPSIZE, 2);
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	/* Process General and Audio specific control requests */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case REQ_SetInterface:
+			/* Set Interface is not handled by the library, as its function is application-specific */
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+				Endpoint_ClearStatusStage();
+
+				/* Check if the host is enabling the audio interface (setting AlternateSetting to 1) */
+				StreamingAudioInterfaceSelected = ((USB_ControlRequest.wValue) != 0);
+			}
+
+			break;
+		case AUDIO_REQ_GetStatus:
+			/* Get Status request can be directed at either the interface or endpoint, neither is currently used
+			 * according to the latest USB Audio 1.0 standard, but must be ACKed with no data when requested */
+			if ((USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) ||
+			    (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT)))
+			{
+				Endpoint_ClearSETUP();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case AUDIO_REQ_SetCurrent:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT))
+			{
+				/* Extract out the relevant request information to get the target Endpoint address and control being set */
+				uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex;
+				uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
+
+				/* Only handle SET CURRENT requests to the audio endpoint's sample frequency property */
+				if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
+				{
+					uint8_t SampleRate[3];
+
+					Endpoint_ClearSETUP();
+					Endpoint_Read_Control_Stream_LE(SampleRate, sizeof(SampleRate));
+					Endpoint_ClearIN();
+
+					/* Set the new sampling frequency to the value given by the host */
+					CurrentAudioSampleFrequency = (((uint32_t)SampleRate[2] << 16) | ((uint32_t)SampleRate[1] << 8) | (uint32_t)SampleRate[0]);
+
+					/* Adjust sample reload timer to the new frequency */
+					OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
+				}
+			}
+
+			break;
+		case AUDIO_REQ_GetCurrent:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
+			{
+				/* Extract out the relevant request information to get the target Endpoint address and control being retrieved */
+				uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex;
+				uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
+
+				/* Only handle GET CURRENT requests to the audio endpoint's sample frequency property */
+				if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
+				{
+					uint8_t SampleRate[3];
+
+					/* Convert the sampling rate value into the 24-bit format the host expects for the property */
+					SampleRate[2] = (CurrentAudioSampleFrequency >> 16);
+					SampleRate[1] = (CurrentAudioSampleFrequency >> 8);
+					SampleRate[0] = (CurrentAudioSampleFrequency &  0xFF);
+
+					Endpoint_ClearSETUP();
+					Endpoint_Write_Control_Stream_LE(SampleRate, sizeof(SampleRate));
+					Endpoint_ClearOUT();
+				}
+			}
+
+			break;
+	}
+}
+
+/** ISR to handle the reloading of the data endpoint with the next sample. */
+ISR(TIMER0_COMPA_vect, ISR_BLOCK)
+{
+	uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
+
+	/* Select the audio stream endpoint */
+	Endpoint_SelectEndpoint(AUDIO_STREAM_EPADDR);
+
+	/* Check if the current endpoint can be written to and that the audio interface is enabled */
+	if (Endpoint_IsINReady() && StreamingAudioInterfaceSelected)
+	{
+		int16_t AudioSample;
+
+		#if defined(USE_TEST_TONE)
+			static uint8_t SquareWaveSampleCount;
+			static int16_t CurrentWaveValue;
+
+			/* In test tone mode, generate a square wave at 1/256 of the sample rate */
+			if (SquareWaveSampleCount++ == 0xFF)
+			  CurrentWaveValue ^= 0x8000;
+
+			/* Only generate audio if the board button is being pressed */
+			AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;
+		#else
+			/* Audio sample is ADC value scaled to fit the entire range */
+			AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());
+
+			#if defined(MICROPHONE_BIASED_TO_HALF_RAIL)
+			/* Microphone is biased to half rail voltage, subtract the bias from the sample value */
+			AudioSample -= (SAMPLE_MAX_RANGE / 2);
+			#endif
+		#endif
+
+		/* Write the sample to the buffer */
+		Endpoint_Write_16_LE(AudioSample);
+
+		/* Check to see if the bank is now full */
+		if (!(Endpoint_IsReadWriteAllowed()))
+		{
+			/* Send the full packet to the host */
+			Endpoint_ClearIN();
+		}
+	}
+
+	Endpoint_SelectEndpoint(PrevEndpoint);
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioInput/AudioInput.h b/lib/lufa/Demos/Device/LowLevel/AudioInput/AudioInput.h
new file mode 100644
index 000000000..718df7cb7
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioInput/AudioInput.h
@@ -0,0 +1,82 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for AudioInput.c.
+ */
+
+#ifndef _AUDIO_INPUT_H_
+#define _AUDIO_INPUT_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+
+		#include "Descriptors.h"
+		#include "Config/AppConfig.h"
+
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Drivers/Peripheral/ADC.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** Maximum audio sample value for the microphone input. */
+		#define SAMPLE_MAX_RANGE          0xFFFF
+
+		/** Maximum ADC range for the microphone input. */
+		#define ADC_MAX_RANGE             0x3FF
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioInput/AudioInput.txt b/lib/lufa/Demos/Device/LowLevel/AudioInput/AudioInput.txt
new file mode 100644
index 000000000..9dc6c36b8
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioInput/AudioInput.txt
@@ -0,0 +1,87 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Audio Input Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Audio Class</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Standard Audio Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Audio 1.0 Class Specification \n
+ *        USBIF Audio 1.0 Class Terminal Types Specification \n
+ *        USBIF Audio 1.0 Data Formats Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Audio demonstration application. This gives a simple reference
+ *  application for implementing a USB Audio Input device using the
+ *  basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers
+ *  required).
+ *
+ *  On start-up the system will automatically enumerate and function as a
+ *  USB microphone. By default, the demo will produce a square wave test tone
+ *  when the board button is pressed. If USE_TEST_TONE is not defined in the
+ *  project makefile, incoming audio from the ADC channel 1 will be sampled
+ *  and sent to the host computer instead.
+ *
+ *  When in microphone mode, connect a microphone to the ADC channel 2.
+ *
+ *  Under Windows, if a driver request dialogue pops up, select the option
+ *  to automatically install the appropriate drivers.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>USE_TEST_TONE</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
+ *        instead of sampling the board microphone.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h b/lib/lufa/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h
new file mode 100644
index 000000000..ff8ed270d
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h
@@ -0,0 +1,51 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define MIC_IN_ADC_CHANNEL               2
+
+	#define MICROPHONE_BIASED_TO_HALF_RAIL
+	#define USE_TEST_TONE
+
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioInput/Config/LUFAConfig.h b/lib/lufa/Demos/Device/LowLevel/AudioInput/Config/LUFAConfig.h
new file mode 100644
index 000000000..6048c1d80
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioInput/Config/LUFAConfig.h
@@ -0,0 +1,93 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioInput/Descriptors.c b/lib/lufa/Demos/Device/LowLevel/AudioInput/Descriptors.c
new file mode 100644
index 000000000..55e09244c
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioInput/Descriptors.c
@@ -0,0 +1,312 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2047,
+	.ReleaseNumber          = VERSION_BCD(0,0,2),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces          = 2,
+
+			.ConfigurationNumber      = 1,
+			.ConfigurationStrIndex    = NO_DESCRIPTOR,
+
+			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
+		},
+
+	.Audio_ControlInterface =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioControl,
+			.AlternateSetting         = 0,
+
+			.TotalEndpoints           = 0,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_ControlSubclass,
+			.Protocol                 = AUDIO_CSCP_ControlProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_ControlInterface_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
+
+			.ACSpecification          = VERSION_BCD(1,0,0),
+			.TotalLength              = (sizeof(USB_Audio_Descriptor_Interface_AC_t) +
+			                             sizeof(USB_Audio_Descriptor_InputTerminal_t) +
+			                             sizeof(USB_Audio_Descriptor_OutputTerminal_t)),
+
+			.InCollection             = 1,
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+		},
+
+	.Audio_InputTerminal =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
+
+			.TerminalID               = 0x01,
+			.TerminalType             = AUDIO_TERMINAL_IN_MIC,
+			.AssociatedOutputTerminal = 0x00,
+
+			.TotalChannels            = 1,
+			.ChannelConfig            = 0,
+
+			.ChannelStrIndex          = NO_DESCRIPTOR,
+			.TerminalStrIndex         = NO_DESCRIPTOR
+		},
+
+	.Audio_OutputTerminal =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
+
+			.TerminalID               = 0x02,
+			.TerminalType             = AUDIO_TERMINAL_STREAMING,
+			.AssociatedInputTerminal  = 0x00,
+
+			.SourceID                 = 0x01,
+
+			.TerminalStrIndex         = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_Alt0 =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+			.AlternateSetting         = 0,
+
+			.TotalEndpoints           = 0,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
+			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_Alt1 =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+			.AlternateSetting         = 1,
+
+			.TotalEndpoints           = 1,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
+			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
+
+			.TerminalLink             = 0x02,
+
+			.FrameDelay               = 1,
+			.AudioFormat              = 0x0001
+		},
+
+	.Audio_AudioFormat =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Format_t) +
+			                                     sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates),
+			                             .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_FormatType,
+
+			.FormatType               = 0x01,
+			.Channels                 = 0x01,
+
+			.SubFrameSize             = 0x02,
+			.BitResolution            = 16,
+
+			.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t)),
+		},
+
+	.Audio_AudioFormatSampleRates =
+		{
+			AUDIO_SAMPLE_FREQ(8000),
+			AUDIO_SAMPLE_FREQ(11025),
+			AUDIO_SAMPLE_FREQ(22050),
+			AUDIO_SAMPLE_FREQ(44100),
+			AUDIO_SAMPLE_FREQ(48000),
+		},
+
+	.Audio_StreamEndpoint =
+		{
+			.Endpoint =
+				{
+					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
+
+					.EndpointAddress     = AUDIO_STREAM_EPADDR,
+					.Attributes          = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
+					.EndpointSize        = AUDIO_STREAM_EPSIZE,
+					.PollingIntervalMS   = 0x01
+				},
+
+			.Refresh                  = 0,
+			.SyncEndpointNumber       = 0
+		},
+
+	.Audio_StreamEndpoint_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint},
+			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
+
+			.Attributes               = (AUDIO_EP_ACCEPTS_SMALL_PACKETS | AUDIO_EP_SAMPLE_FREQ_CONTROL),
+
+			.LockDelayUnits           = 0x00,
+			.LockDelay                = 0x0000
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Audio In Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioInput/Descriptors.h b/lib/lufa/Demos/Device/LowLevel/AudioInput/Descriptors.h
new file mode 100644
index 000000000..cf832efb9
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioInput/Descriptors.h
@@ -0,0 +1,106 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Endpoint address of the Audio isochronous streaming data IN endpoint. */
+		#define AUDIO_STREAM_EPADDR          (ENDPOINT_DIR_IN | 1)
+
+		/** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */
+		#define AUDIO_STREAM_EPSIZE           256
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t     Config;
+
+			// Audio Control Interface
+			USB_Descriptor_Interface_t                Audio_ControlInterface;
+			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
+			USB_Audio_Descriptor_InputTerminal_t      Audio_InputTerminal;
+			USB_Audio_Descriptor_OutputTerminal_t     Audio_OutputTerminal;
+
+			// Audio Streaming Interface
+			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt0;
+			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt1;
+			USB_Audio_Descriptor_Interface_AS_t       Audio_StreamInterface_SPC;
+			USB_Audio_Descriptor_Format_t             Audio_AudioFormat;
+			USB_Audio_SampleFreq_t                    Audio_AudioFormatSampleRates[5];
+			USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint;
+			USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
+			INTERFACE_ID_AudioStream  = 1, /**< Audio stream interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioInput/asf.xml b/lib/lufa/Demos/Device/LowLevel/AudioInput/asf.xml
new file mode 100644
index 000000000..dab549a75
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioInput/asf.xml
@@ -0,0 +1,52 @@
+<asf xmlversion="1.0">

+	<project caption="Audio Input Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_input.example.avr8">

+		<require idref="lufa.demos.device.lowlevel.audio_input"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.lowlevel.audio_input" caption="Audio Input Device Demo (Low Level APIs)">

+		<info type="description" value="summary">

+		Audio 1.0 Input device demo, implementing a basic USB microphone. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Low Level APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="Audio Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="AudioInput.txt"/>

+

+		<build type="c-source" value="AudioInput.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="AudioInput.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

+		<build type="header-file" value="Config/AppConfig.h"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.peripheral.adc"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.buttons"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/LowLevel/AudioInput/doxyfile b/lib/lufa/Demos/Device/LowLevel/AudioInput/doxyfile
new file mode 100644
index 000000000..d52d22cdc
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioInput/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Audio Input Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioInput/makefile b/lib/lufa/Demos/Device/LowLevel/AudioInput/makefile
new file mode 100644
index 000000000..694e7fb1a
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioInput/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = AudioInput
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioOutput/AudioOutput.c b/lib/lufa/Demos/Device/LowLevel/AudioOutput/AudioOutput.c
new file mode 100644
index 000000000..7966ba6ea
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioOutput/AudioOutput.c
@@ -0,0 +1,293 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the AudioOutput demo. This file contains the main tasks of the demo and
+ *  is responsible for the initial application hardware configuration.
+ */
+
+#include "AudioOutput.h"
+
+/** Flag to indicate if the streaming audio alternative interface has been selected by the host. */
+static bool StreamingAudioInterfaceSelected = false;
+
+/** Current audio sampling frequency of the streaming audio endpoint. */
+static uint32_t CurrentAudioSampleFrequency = 48000;
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs, and
+ *  configures the sample update and PWM timers.
+ */
+void EVENT_USB_Device_Connect(void)
+{
+	/* Indicate USB enumerating */
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+	/* Sample reload timer initialization */
+	TIMSK0 = (1 << OCIE0A);
+	OCR0A  = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
+	TCCR0A = (1 << WGM01);  // CTC mode
+	TCCR0B = (1 << CS01);   // Fcpu/8 speed
+
+	#if defined(AUDIO_OUT_MONO)
+	/* Set speaker as output */
+	DDRC  |= (1 << 6);
+	#elif defined(AUDIO_OUT_STEREO)
+	/* Set speakers as outputs */
+	DDRC  |= ((1 << 6) | (1 << 5));
+	#elif defined(AUDIO_OUT_PORTC)
+	/* Set PORTC as outputs */
+	DDRC  |= 0xFF;
+	#endif
+
+	#if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO))
+	/* PWM speaker timer initialization */
+	TCCR3A = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)
+	                       | (1 << COM3B1) | (1 << COM3B0)); // Set on match, clear on TOP
+	TCCR3B = ((1 << WGM32) | (1 << CS30));  // Fast 8-Bit PWM, F_CPU speed
+	#endif
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs, disables the sample update and PWM output timers and stops the USB and Audio management tasks.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Stop the timers */
+	TCCR0B = 0;
+	#if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO))
+	TCCR3B = 0;
+	#endif
+
+	#if defined(AUDIO_OUT_MONO)
+	/* Set speaker as input to reduce current draw */
+	DDRC  &= ~(1 << 6);
+	#elif defined(AUDIO_OUT_STEREO)
+	/* Set speakers as inputs to reduce current draw */
+	DDRC  &= ~((1 << 6) | (1 << 5));
+	#elif defined(AUDIO_OUT_PORTC)
+	/* Set PORTC low */
+	PORTC = 0x00;
+	#endif
+
+	/* Indicate streaming audio interface not selected */
+	StreamingAudioInterfaceSelected = false;
+
+	/* Indicate USB not ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
+ *  of the USB device after enumeration - the device endpoints are configured.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup Audio Stream Endpoint */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPADDR, EP_TYPE_ISOCHRONOUS, AUDIO_STREAM_EPSIZE, 2);
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	/* Process General and Audio specific control requests */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case REQ_SetInterface:
+			/* Set Interface is not handled by the library, as its function is application-specific */
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+				Endpoint_ClearStatusStage();
+
+				/* Check if the host is enabling the audio interface (setting AlternateSetting to 1) */
+				StreamingAudioInterfaceSelected = ((USB_ControlRequest.wValue) != 0);
+			}
+
+			break;
+		case AUDIO_REQ_GetStatus:
+			/* Get Status request can be directed at either the interface or endpoint, neither is currently used
+			 * according to the latest USB Audio 1.0 standard, but must be ACKed with no data when requested */
+			if ((USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) ||
+			    (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT)))
+			{
+				Endpoint_ClearSETUP();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case AUDIO_REQ_SetCurrent:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT))
+			{
+				/* Extract out the relevant request information to get the target Endpoint address and control being set */
+				uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex;
+				uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
+
+				/* Only handle SET CURRENT requests to the audio endpoint's sample frequency property */
+				if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
+				{
+					uint8_t SampleRate[3];
+
+					Endpoint_ClearSETUP();
+					Endpoint_Read_Control_Stream_LE(SampleRate, sizeof(SampleRate));
+					Endpoint_ClearIN();
+
+					/* Set the new sampling frequency to the value given by the host */
+					CurrentAudioSampleFrequency = (((uint32_t)SampleRate[2] << 16) | ((uint32_t)SampleRate[1] << 8) | (uint32_t)SampleRate[0]);
+
+					/* Adjust sample reload timer to the new frequency */
+					OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
+				}
+			}
+
+			break;
+		case AUDIO_REQ_GetCurrent:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
+			{
+				/* Extract out the relevant request information to get the target Endpoint address and control being retrieved */
+				uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex;
+				uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
+
+				/* Only handle GET CURRENT requests to the audio endpoint's sample frequency property */
+				if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
+				{
+					uint8_t SampleRate[3];
+
+					/* Convert the sampling rate value into the 24-bit format the host expects for the property */
+					SampleRate[2] = (CurrentAudioSampleFrequency >> 16);
+					SampleRate[1] = (CurrentAudioSampleFrequency >> 8);
+					SampleRate[0] = (CurrentAudioSampleFrequency &  0xFF);
+
+					Endpoint_ClearSETUP();
+					Endpoint_Write_Control_Stream_LE(SampleRate, sizeof(SampleRate));
+					Endpoint_ClearOUT();
+				}
+			}
+
+			break;
+	}
+}
+
+/** ISR to handle the reloading of the PWM timer with the next sample. */
+ISR(TIMER0_COMPA_vect, ISR_BLOCK)
+{
+	uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
+
+	/* Select the audio stream endpoint */
+	Endpoint_SelectEndpoint(AUDIO_STREAM_EPADDR);
+
+	/* Check if the current endpoint can be read from (contains a packet) and the host is sending data */
+	if (Endpoint_IsOUTReceived() && StreamingAudioInterfaceSelected)
+	{
+		/* Retrieve the signed 16-bit left and right audio samples, convert to 8-bit */
+		int8_t LeftSample_8Bit   = ((int16_t)Endpoint_Read_16_LE() >> 8);
+		int8_t RightSample_8Bit  = ((int16_t)Endpoint_Read_16_LE() >> 8);
+
+		/* Mix the two channels together to produce a mono, 8-bit sample */
+		int8_t MixedSample_8Bit  = (((int16_t)LeftSample_8Bit + (int16_t)RightSample_8Bit) >> 1);
+
+		/* Check to see if the bank is now empty */
+		if (!(Endpoint_IsReadWriteAllowed()))
+		{
+			/* Acknowledge the packet, clear the bank ready for the next packet */
+			Endpoint_ClearOUT();
+		}
+
+		#if defined(AUDIO_OUT_MONO)
+		/* Load the sample into the PWM timer channel */
+		OCR3A = (MixedSample_8Bit ^ (1 << 7));
+		#elif defined(AUDIO_OUT_STEREO)
+		/* Load the dual 8-bit samples into the PWM timer channels */
+		OCR3A = (LeftSample_8Bit  ^ (1 << 7));
+		OCR3B = (RightSample_8Bit ^ (1 << 7));
+		#elif defined(AUDIO_OUT_PORTC)
+		/* Load the 8-bit mixed sample into PORTC */
+		PORTC = MixedSample_8Bit;
+		#endif
+
+		uint8_t LEDMask = LEDS_NO_LEDS;
+
+		/* Turn on LEDs as the sample amplitude increases */
+		if (MixedSample_8Bit > 16)
+		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4);
+		else if (MixedSample_8Bit > 8)
+		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3);
+		else if (MixedSample_8Bit > 4)
+		  LEDMask = (LEDS_LED1 | LEDS_LED2);
+		else if (MixedSample_8Bit > 2)
+		  LEDMask = (LEDS_LED1);
+
+		LEDs_SetAllLEDs(LEDMask);
+	}
+
+	Endpoint_SelectEndpoint(PrevEndpoint);
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioOutput/AudioOutput.h b/lib/lufa/Demos/Device/LowLevel/AudioOutput/AudioOutput.h
new file mode 100644
index 000000000..15c8c458d
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioOutput/AudioOutput.h
@@ -0,0 +1,74 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for AudioOutput.c.
+ */
+
+#ifndef _AUDIO_OUTPUT_H_
+#define _AUDIO_OUTPUT_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+
+		#include "Descriptors.h"
+		#include "Config/AppConfig.h"
+
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt b/lib/lufa/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt
new file mode 100644
index 000000000..8f0c7d656
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt
@@ -0,0 +1,92 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Audio Output Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Audio Class</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Standard Audio Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Audio 1.0 Class Specification \n
+ *        USBIF Audio 1.0 Class Terminal Types Specification \n
+ *        USBIF Audio 1.0 Data Formats Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Audio demonstration application. This gives a simple reference
+ *  application for implementing a USB Audio Output device using the
+ *  basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers
+ *  required).
+ *
+ *  On start-up the system will automatically enumerate and function
+ *  as a USB speaker. Outgoing audio will output in 8-bit PWM onto
+ *  the timer 3 output compare channel A for AUDIO_OUT_MONO mode, on
+ *  timer 3 channels A and B for AUDIO_OUT_STEREO and on PORTC as a signed
+ *  mono sample for AUDIO_OUT_PORTC. Audio output will also be indicated on
+ *  the board LEDs in all modes. Decouple audio outputs with a capacitor and
+ *  attach to a speaker to hear the audio.
+ *
+ *  Under Windows, if a driver request dialogue pops up, select the option
+ *  to automatically install the appropriate drivers.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>AUDIO_OUT_STEREO</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>AUDIO_OUT_MONO</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>AUDIO_OUT_PORTC</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an
+ *        external DAC.</td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioOutput/Config/AppConfig.h b/lib/lufa/Demos/Device/LowLevel/AudioOutput/Config/AppConfig.h
new file mode 100644
index 000000000..e93cfc813
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioOutput/Config/AppConfig.h
@@ -0,0 +1,50 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define AUDIO_OUT_STEREO
+//	#define AUDIO_OUT_MONO
+//	#define AUDIO_OUT_PORTC
+
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioOutput/Config/LUFAConfig.h b/lib/lufa/Demos/Device/LowLevel/AudioOutput/Config/LUFAConfig.h
new file mode 100644
index 000000000..6048c1d80
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioOutput/Config/LUFAConfig.h
@@ -0,0 +1,93 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioOutput/Descriptors.c b/lib/lufa/Demos/Device/LowLevel/AudioOutput/Descriptors.c
new file mode 100644
index 000000000..64be54bf0
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioOutput/Descriptors.c
@@ -0,0 +1,312 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2046,
+	.ReleaseNumber          = VERSION_BCD(0,0,2),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces          = 2,
+
+			.ConfigurationNumber      = 1,
+			.ConfigurationStrIndex    = NO_DESCRIPTOR,
+
+			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
+		},
+
+	.Audio_ControlInterface =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioControl,
+			.AlternateSetting         = 0,
+
+			.TotalEndpoints           = 0,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_ControlSubclass,
+			.Protocol                 = AUDIO_CSCP_ControlProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_ControlInterface_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
+
+			.ACSpecification          = VERSION_BCD(1,0,0),
+			.TotalLength              = (sizeof(USB_Audio_Descriptor_Interface_AC_t) +
+			                             sizeof(USB_Audio_Descriptor_InputTerminal_t) +
+			                             sizeof(USB_Audio_Descriptor_OutputTerminal_t)),
+
+			.InCollection             = 1,
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+		},
+
+	.Audio_InputTerminal =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
+
+			.TerminalID               = 0x01,
+			.TerminalType             = AUDIO_TERMINAL_STREAMING,
+			.AssociatedOutputTerminal = 0x00,
+
+			.TotalChannels            = 2,
+			.ChannelConfig            = (AUDIO_CHANNEL_LEFT_FRONT | AUDIO_CHANNEL_RIGHT_FRONT),
+
+			.ChannelStrIndex          = NO_DESCRIPTOR,
+			.TerminalStrIndex         = NO_DESCRIPTOR
+		},
+
+	.Audio_OutputTerminal =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
+
+			.TerminalID               = 0x02,
+			.TerminalType             = AUDIO_TERMINAL_OUT_SPEAKER,
+			.AssociatedInputTerminal  = 0x00,
+
+			.SourceID                 = 0x01,
+
+			.TerminalStrIndex         = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_Alt0 =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+			.AlternateSetting         = 0,
+
+			.TotalEndpoints           = 0,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
+			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_Alt1 =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+			.AlternateSetting         = 1,
+
+			.TotalEndpoints           = 1,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
+			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
+
+			.TerminalLink             = 0x01,
+
+			.FrameDelay               = 1,
+			.AudioFormat              = 0x0001
+		},
+
+	.Audio_AudioFormat =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Format_t) +
+			                                     sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates),
+			                             .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_FormatType,
+
+			.FormatType               = 0x01,
+			.Channels                 = 0x02,
+
+			.SubFrameSize             = 0x02,
+			.BitResolution            = 16,
+
+			.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t)),
+		},
+
+	.Audio_AudioFormatSampleRates =
+		{
+			AUDIO_SAMPLE_FREQ(8000),
+			AUDIO_SAMPLE_FREQ(11025),
+			AUDIO_SAMPLE_FREQ(22050),
+			AUDIO_SAMPLE_FREQ(44100),
+			AUDIO_SAMPLE_FREQ(48000),
+		},
+
+	.Audio_StreamEndpoint =
+		{
+			.Endpoint =
+				{
+					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
+
+					.EndpointAddress     = AUDIO_STREAM_EPADDR,
+					.Attributes          = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
+					.EndpointSize        = AUDIO_STREAM_EPSIZE,
+					.PollingIntervalMS   = 0x01
+				},
+
+			.Refresh                  = 0,
+			.SyncEndpointNumber       = 0
+		},
+
+	.Audio_StreamEndpoint_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint},
+			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
+
+			.Attributes               = (AUDIO_EP_ACCEPTS_SMALL_PACKETS | AUDIO_EP_SAMPLE_FREQ_CONTROL),
+
+			.LockDelayUnits           = 0x00,
+			.LockDelay                = 0x0000
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Audio Out Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioOutput/Descriptors.h b/lib/lufa/Demos/Device/LowLevel/AudioOutput/Descriptors.h
new file mode 100644
index 000000000..d9be070fa
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioOutput/Descriptors.h
@@ -0,0 +1,106 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Endpoint address of the Audio isochronous streaming data OUT endpoint. */
+		#define AUDIO_STREAM_EPADDR          (ENDPOINT_DIR_OUT | 1)
+
+		/** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */
+		#define AUDIO_STREAM_EPSIZE           256
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t     Config;
+
+			// Audio Control Interface
+			USB_Descriptor_Interface_t                Audio_ControlInterface;
+			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
+			USB_Audio_Descriptor_InputTerminal_t      Audio_InputTerminal;
+			USB_Audio_Descriptor_OutputTerminal_t     Audio_OutputTerminal;
+
+			// Audio Streaming Interface
+			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt0;
+			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt1;
+			USB_Audio_Descriptor_Interface_AS_t       Audio_StreamInterface_SPC;
+			USB_Audio_Descriptor_Format_t             Audio_AudioFormat;
+			USB_Audio_SampleFreq_t                    Audio_AudioFormatSampleRates[5];
+			USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint;
+			USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
+			INTERFACE_ID_AudioStream  = 1, /**< Audio stream interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioOutput/asf.xml b/lib/lufa/Demos/Device/LowLevel/AudioOutput/asf.xml
new file mode 100644
index 000000000..cddfb8543
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioOutput/asf.xml
@@ -0,0 +1,51 @@
+<asf xmlversion="1.0">

+	<project caption="Audio Output Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_output.example.avr8">

+		<require idref="lufa.demos.device.lowlevel.audio_output"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.lowlevel.audio_output" caption="Audio Output Device Demo (Low Level APIs)">

+		<info type="description" value="summary">

+		Audio 1.0 Output device demo, implementing a basic USB speaker. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Low Level APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="Audio Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="AudioOutput.txt"/>

+

+		<build type="c-source" value="AudioOutput.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="AudioOutput.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

+		<build type="header-file" value="Config/AppConfig.h"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.buttons"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/LowLevel/AudioOutput/doxyfile b/lib/lufa/Demos/Device/LowLevel/AudioOutput/doxyfile
new file mode 100644
index 000000000..937ef3907
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioOutput/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Audio Output Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = YES
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/LowLevel/AudioOutput/makefile b/lib/lufa/Demos/Device/LowLevel/AudioOutput/makefile
new file mode 100644
index 000000000..a0f34c4a4
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/AudioOutput/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = AudioOutput
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.c b/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.c
new file mode 100644
index 000000000..fe7ad84bb
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.c
@@ -0,0 +1,136 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the Bulk Vendor demo. This file contains the main tasks of the demo and
+ *  is responsible for the initial application hardware configuration.
+ */
+
+#define  INCLUDE_FROM_BULKVENDOR_C
+#include "BulkVendor.h"
+
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		USB_USBTask();
+
+		uint8_t ReceivedData[VENDOR_IO_EPSIZE];
+		memset(ReceivedData, 0x00, sizeof(ReceivedData));
+
+		Endpoint_SelectEndpoint(VENDOR_OUT_EPADDR);
+		if (Endpoint_IsOUTReceived())
+		{
+			Endpoint_Read_Stream_LE(ReceivedData, VENDOR_IO_EPSIZE, NULL);
+			Endpoint_ClearOUT();
+
+			Endpoint_SelectEndpoint(VENDOR_IN_EPADDR);
+			Endpoint_Write_Stream_LE(ReceivedData, VENDOR_IO_EPSIZE, NULL);
+			Endpoint_ClearIN();
+		}
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
+void EVENT_USB_Device_Connect(void)
+{
+	/* Indicate USB enumerating */
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Indicate USB not ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
+ *  of the USB device after enumeration - the device endpoints are configured.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup Vendor Data Endpoints */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(VENDOR_IN_EPADDR,  EP_TYPE_BULK, VENDOR_IO_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(VENDOR_OUT_EPADDR, EP_TYPE_BULK, VENDOR_IO_EPSIZE, 1);
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	// Process vendor specific control requests here
+}
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.h b/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.h
new file mode 100644
index 000000000..3d74ac001
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.h
@@ -0,0 +1,76 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for BulkVendor.c.
+ */
+
+#ifndef _BULK_VENDOR_H_
+#define _BULK_VENDOR_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY       LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING   (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY         (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR         (LEDS_LED1 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+		#define LEDMASK_USB_BUSY           LEDS_LED2
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.txt b/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.txt
new file mode 100644
index 000000000..d6688a9cd
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.txt
@@ -0,0 +1,69 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Bulk Vendor Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Vendor (no official class)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Vendor (no official subclass)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>None</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Bulk Vendor demonstration application. This gives a simple reference
+ *  application for implementing a USB device that contains read/write bulk type
+ *  endpoints, for implementing custom USB protocols.
+ *
+ *  On start-up the system will automatically enumerate and echo back packets
+ *  sent from the host.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/Config/LUFAConfig.h b/lib/lufa/Demos/Device/LowLevel/BulkVendor/Config/LUFAConfig.h
new file mode 100644
index 000000000..0ec4635eb
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               4
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/Descriptors.c b/lib/lufa/Demos/Device/LowLevel/BulkVendor/Descriptors.c
new file mode 100644
index 000000000..9a4c2792b
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/Descriptors.c
@@ -0,0 +1,194 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x206C,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = USB_CONFIG_ATTR_RESERVED,
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.Vendor_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_Vendor,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = 0xFF,
+			.SubClass               = 0xFF,
+			.Protocol               = 0xFF,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.Vendor_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = VENDOR_IN_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = VENDOR_IO_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.Vendor_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = VENDOR_OUT_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = VENDOR_IO_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Bulk Vendor Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/Descriptors.h b/lib/lufa/Demos/Device/LowLevel/BulkVendor/Descriptors.h
new file mode 100644
index 000000000..939717ea3
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/Descriptors.h
@@ -0,0 +1,96 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+	/* Macros: */
+		/** Endpoint address of the Bulk Vendor device-to-host data IN endpoint. */
+		#define VENDOR_IN_EPADDR               (ENDPOINT_DIR_IN  | 3)
+
+		/** Endpoint address of the Bulk Vendor host-to-device data OUT endpoint. */
+		#define VENDOR_OUT_EPADDR              (ENDPOINT_DIR_OUT | 4)
+
+		/** Size in bytes of the Bulk Vendor data endpoints. */
+		#define VENDOR_IO_EPSIZE               64
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Vendor Interface
+			USB_Descriptor_Interface_t            Vendor_Interface;
+			USB_Descriptor_Endpoint_t             Vendor_DataInEndpoint;
+			USB_Descriptor_Endpoint_t             Vendor_DataOutEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_Vendor = 0, /**< Vendor interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/HostTestApp/test_bulk_vendor.py b/lib/lufa/Demos/Device/LowLevel/BulkVendor/HostTestApp/test_bulk_vendor.py
new file mode 100644
index 000000000..fff8ecd78
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/HostTestApp/test_bulk_vendor.py
@@ -0,0 +1,67 @@
+"""
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+"""
+
+"""
+    LUFA Bulk Vendor device demo host test script. This script will send and
+    receive a continuous stream of packets to/from to the device, to show
+    bidirectional communications.
+
+    Requires the pyUSB library (http://sourceforge.net/projects/pyusb/).
+"""
+
+import sys
+from time import sleep
+import usb.core
+import usb.util
+
+# Bulk Vendor HID device VID and PID
+device_vid = 0x03EB
+device_pid = 0x206C
+device_in_ep  = 3
+device_out_ep = 4
+
+
+def get_vendor_device_handle():
+	dev_handle = usb.core.find(idVendor=device_vid, idProduct=device_pid)
+	return dev_handle
+
+
+def write(device, packet):
+    device.write(usb.util.ENDPOINT_OUT | device_out_ep, packet, 0, 1000)
+    print("Sent Packet: {0}".format(packet))
+
+
+def read(device):
+    packet = device.read(usb.util.ENDPOINT_IN | device_in_ep, 64, 0, 1000)
+    print("Received Packet: {0}".format(''.join([chr(x) for x in packet])))
+    return packet
+
+
+def main():
+    vendor_device = get_vendor_device_handle()
+
+    if vendor_device is None:
+        print("No valid Vendor device found.")
+        sys.exit(1)
+
+    vendor_device.set_configuration()
+
+    print("Connected to device 0x%04X/0x%04X - %s [%s]" %
+          (vendor_device.idVendor, vendor_device.idProduct,
+           usb.util.get_string(vendor_device, 255, vendor_device.iProduct),
+           usb.util.get_string(vendor_device, 255, vendor_device.iManufacturer)))
+
+    x = 0
+    while 1:
+    	x = x + 1 % 255
+    	write(vendor_device, "TEST PACKET %d" % x)
+    	read(vendor_device)
+    	sleep(1)
+
+if __name__ == '__main__':
+    main()
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/LUFA_Bulk_Vendor_Demo.inf b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/LUFA_Bulk_Vendor_Demo.inf
new file mode 100644
index 000000000..32a29fdc5
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/LUFA_Bulk_Vendor_Demo.inf
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.dll b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.dll
new file mode 100644
index 000000000..f916b0898
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.dll
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.sys b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.sys
new file mode 100644
index 000000000..0718dfb7c
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.sys
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.dll b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.dll
new file mode 100644
index 000000000..292df2785
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.dll
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.sys b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.sys
new file mode 100644
index 000000000..f17914b8c
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.sys
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x64.exe b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x64.exe
new file mode 100644
index 000000000..c38919ee5
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x64.exe
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x86.exe b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x86.exe
new file mode 100644
index 000000000..030ec300c
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x86.exe
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/license/libusb0/installer_license.txt b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/license/libusb0/installer_license.txt
new file mode 100644
index 000000000..56bb2cda2
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/license/libusb0/installer_license.txt
@@ -0,0 +1,851 @@
+Copyright (c) 2002-2004 Stephan Meyer, <ste_meyer@web.de>
+Copyright (c) 2000-2004 Johannes Erdfelt, <johannes@erdfelt.com>
+Copyright (c) 2000-2004 Thomas Sailer, <sailer@ife.ee.ethz.ch>
+Copyright (c) 2010 Travis Robinson, <libusbdotnet@gmail.com>
+
+This software is distributed under the following licenses:
+Driver:      GNU General Public License (GPL)
+Library, Test Files, Installer:    GNU Lesser General Public License (LGPL)
+
+***********************************************************************
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<http://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.
+
+                   GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+  This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+  0. Additional Definitions.
+
+  As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+  "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+  An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+  A "Combined Work" is a work produced by combining or linking an
+Application with the Library.  The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+  The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+  The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+  1. Exception to Section 3 of the GNU GPL.
+
+  You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+  2. Conveying Modified Versions.
+
+  If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+   a) under this License, provided that you make a good faith effort to
+   ensure that, in the event an Application does not supply the
+   function or data, the facility still operates, and performs
+   whatever part of its purpose remains meaningful, or
+
+   b) under the GNU GPL, with none of the additional permissions of
+   this License applicable to that copy.
+
+  3. Object Code Incorporating Material from Library Header Files.
+
+  The object code form of an Application may incorporate material from
+a header file that is part of the Library.  You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+   a) Give prominent notice with each copy of the object code that the
+   Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the object code with a copy of the GNU GPL and this license
+   document.
+
+  4. Combined Works.
+
+  You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+   a) Give prominent notice with each copy of the Combined Work that
+   the Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the Combined Work with a copy of the GNU GPL and this license
+   document.
+
+   c) For a Combined Work that displays copyright notices during
+   execution, include the copyright notice for the Library among
+   these notices, as well as a reference directing the user to the
+   copies of the GNU GPL and this license document.
+
+   d) Do one of the following:
+
+       0) Convey the Minimal Corresponding Source under the terms of this
+       License, and the Corresponding Application Code in a form
+       suitable for, and under terms that permit, the user to
+       recombine or relink the Application with a modified version of
+       the Linked Version to produce a modified Combined Work, in the
+       manner specified by section 6 of the GNU GPL for conveying
+       Corresponding Source.
+
+       1) Use a suitable shared library mechanism for linking with the
+       Library.  A suitable mechanism is one that (a) uses at run time
+       a copy of the Library already present on the user's computer
+       system, and (b) will operate properly with a modified version
+       of the Library that is interface-compatible with the Linked
+       Version.
+
+   e) Provide Installation Information, but only if you would otherwise
+   be required to provide such information under section 6 of the
+   GNU GPL, and only to the extent that such information is
+   necessary to install and execute a modified version of the
+   Combined Work produced by recombining or relinking the
+   Application with a modified version of the Linked Version. (If
+   you use option 4d0, the Installation Information must accompany
+   the Minimal Corresponding Source and Corresponding Application
+   Code. If you use option 4d1, you must provide the Installation
+   Information in the manner specified by section 6 of the GNU GPL
+   for conveying Corresponding Source.)
+
+  5. Combined Libraries.
+
+  You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+   a) Accompany the combined library with a copy of the same work based
+   on the Library, uncombined with any other library facilities,
+   conveyed under the terms of this License.
+
+   b) Give prominent notice with the combined library that part of it
+   is a work based on the Library, and explaining where to find the
+   accompanying uncombined form of the same work.
+
+  6. Revised Versions of the GNU Lesser General Public License.
+
+  The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+  Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+  If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.
+
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/x86/libusb0.sys b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/x86/libusb0.sys
new file mode 100644
index 000000000..5322e5b97
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/x86/libusb0.sys
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/x86/libusb0_x86.dll b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/x86/libusb0_x86.dll
new file mode 100644
index 000000000..6e475b90a
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/x86/libusb0_x86.dll
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/asf.xml b/lib/lufa/Demos/Device/LowLevel/BulkVendor/asf.xml
new file mode 100644
index 000000000..e87f33eb0
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/asf.xml
@@ -0,0 +1,61 @@
+<asf xmlversion="1.0">
+	<project caption="Bulk Vendor Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.vendor.example.avr8">
+		<require idref="lufa.demos.device.lowlevel.vendor"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+	</project>
+
+	<project caption="Bulk Vendor Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.vendor.example.xmega">
+		<require idref="lufa.demos.device.lowlevel.vendor"/>
+		<require idref="lufa.boards.dummy.xmega"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atxmega128a1u"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
+	</project>
+
+	<module type="application" id="lufa.demos.device.lowlevel.vendor" caption="Bulk Vendor Device Demo (Low Level APIs)">
+		<info type="description" value="summary">
+		Bulk Vendor Device demo, implementing a basic USB device with vendor-specific endpoints for custom protocol implementations. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Low Level APIs"/>
+			<keyword value="USB Device"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BulkVendor.txt"/>
+		<build type="distribute" subtype="directory" value="HostTestApp"/>
+		<build type="distribute" subtype="directory" value="WindowsDriver"/>
+
+		<build type="c-source" value="BulkVendor.c"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="BulkVendor.h"/>
+		<build type="header-file" value="Descriptors.h"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/doxyfile b/lib/lufa/Demos/Device/LowLevel/BulkVendor/doxyfile
new file mode 100644
index 000000000..7c307b094
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/doxyfile
@@ -0,0 +1,2397 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Bulk Vendor Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/ \
+                         HostTestApp/ \
+                         WindowsDriver/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/makefile b/lib/lufa/Demos/Device/LowLevel/BulkVendor/makefile
new file mode 100644
index 000000000..17fd24ae1
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/BulkVendor/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = BulkVendor
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/Config/LUFAConfig.h b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/Config/LUFAConfig.h
new file mode 100644
index 000000000..070eac471
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               6
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c
new file mode 100644
index 000000000..553223a2b
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c
@@ -0,0 +1,360 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_IADDeviceClass,
+	.SubClass               = USB_CSCP_IADDeviceSubclass,
+	.Protocol               = USB_CSCP_IADDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x204E,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 4,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.CDC1_IAD =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
+
+			.FirstInterfaceIndex    = INTERFACE_ID_CDC1_CCI,
+			.TotalInterfaces        = 2,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.IADStrIndex            = NO_DESCRIPTOR
+		},
+
+	.CDC1_CCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC1_CCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC1_Functional_Header =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
+
+			.CDCSpecification       = VERSION_BCD(1,1,0),
+		},
+
+	.CDC1_Functional_ACM =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
+
+			.Capabilities           = 0x06,
+		},
+
+	.CDC1_Functional_Union =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
+
+			.MasterInterfaceNumber  = INTERFACE_ID_CDC1_CCI,
+			.SlaveInterfaceNumber   = INTERFACE_ID_CDC1_DCI,
+		},
+
+	.CDC1_ManagementEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC1_NOTIFICATION_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
+			.PollingIntervalMS      = 0xFF
+		},
+
+	.CDC1_DCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC1_DCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = CDC_CSCP_CDCDataClass,
+			.SubClass               = CDC_CSCP_NoDataSubclass,
+			.Protocol               = CDC_CSCP_NoDataProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC1_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC1_RX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.CDC1_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC1_TX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.CDC2_IAD =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
+
+			.FirstInterfaceIndex    = INTERFACE_ID_CDC2_CCI,
+			.TotalInterfaces        = 2,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.IADStrIndex            = NO_DESCRIPTOR
+		},
+
+	.CDC2_CCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC2_CCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC2_Functional_Header =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
+
+			.CDCSpecification       = VERSION_BCD(1,1,0),
+		},
+
+	.CDC2_Functional_ACM =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
+
+			.Capabilities           = 0x06,
+		},
+
+	.CDC2_Functional_Union =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
+
+			.MasterInterfaceNumber  = INTERFACE_ID_CDC2_CCI,
+			.SlaveInterfaceNumber   = INTERFACE_ID_CDC2_DCI,
+		},
+
+	.CDC2_ManagementEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC2_NOTIFICATION_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
+			.PollingIntervalMS      = 0xFF
+		},
+
+	.CDC2_DCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC2_DCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = CDC_CSCP_CDCDataClass,
+			.SubClass               = CDC_CSCP_NoDataSubclass,
+			.Protocol               = CDC_CSCP_NoDataProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC2_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC2_RX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.CDC2_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC2_TX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Dual CDC Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h
new file mode 100644
index 000000000..f54fe9c36
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h
@@ -0,0 +1,135 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+	/* Macros: */
+		/** Endpoint address of the first CDC interface's device-to-host data IN endpoint. */
+		#define CDC1_TX_EPADDR                 (ENDPOINT_DIR_IN  | 1)
+
+		/** Endpoint address of the first CDC interface's host-to-device data OUT endpoint. */
+		#define CDC1_RX_EPADDR                 (ENDPOINT_DIR_OUT | 2)
+
+		/** Endpoint address of the first CDC interface's device-to-host notification IN endpoint. */
+		#define CDC1_NOTIFICATION_EPADDR       (ENDPOINT_DIR_IN  | 3)
+
+		/** Endpoint address of the second CDC interface's device-to-host data IN endpoint. */
+		#define CDC2_TX_EPADDR                 (ENDPOINT_DIR_IN  | 4)
+
+		/** Endpoint address of the second CDC interface's host-to-device data OUT endpoint. */
+		#define CDC2_RX_EPADDR                 (ENDPOINT_DIR_OUT | 5)
+
+		/** Endpoint address of the second CDC interface's device-to-host notification IN endpoint. */
+		#define CDC2_NOTIFICATION_EPADDR       (ENDPOINT_DIR_IN  | 6)
+
+		/** Size in bytes of the CDC device-to-host notification IN endpoints. */
+		#define CDC_NOTIFICATION_EPSIZE        8
+
+		/** Size in bytes of the CDC data IN and OUT endpoints. */
+		#define CDC_TXRX_EPSIZE                16
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t    Config;
+
+			// First CDC Control Interface
+			USB_Descriptor_Interface_Association_t   CDC1_IAD;
+			USB_Descriptor_Interface_t               CDC1_CCI_Interface;
+			USB_CDC_Descriptor_FunctionalHeader_t    CDC1_Functional_Header;
+			USB_CDC_Descriptor_FunctionalACM_t       CDC1_Functional_ACM;
+			USB_CDC_Descriptor_FunctionalUnion_t     CDC1_Functional_Union;
+			USB_Descriptor_Endpoint_t                CDC1_ManagementEndpoint;
+
+			// First CDC Data Interface
+			USB_Descriptor_Interface_t               CDC1_DCI_Interface;
+			USB_Descriptor_Endpoint_t                CDC1_DataOutEndpoint;
+			USB_Descriptor_Endpoint_t                CDC1_DataInEndpoint;
+
+			// Second CDC Control Interface
+			USB_Descriptor_Interface_Association_t   CDC2_IAD;
+			USB_Descriptor_Interface_t               CDC2_CCI_Interface;
+			USB_CDC_Descriptor_FunctionalHeader_t    CDC2_Functional_Header;
+			USB_CDC_Descriptor_FunctionalACM_t       CDC2_Functional_ACM;
+			USB_CDC_Descriptor_FunctionalUnion_t     CDC2_Functional_Union;
+			USB_Descriptor_Endpoint_t                CDC2_ManagementEndpoint;
+
+			// Second CDC Data Interface
+			USB_Descriptor_Interface_t               CDC2_DCI_Interface;
+			USB_Descriptor_Endpoint_t                CDC2_DataOutEndpoint;
+			USB_Descriptor_Endpoint_t                CDC2_DataInEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_CDC1_CCI = 0, /**< CDC1 CCI interface descriptor ID */
+			INTERFACE_ID_CDC1_DCI = 1, /**< CDC1 DCI interface descriptor ID */
+			INTERFACE_ID_CDC2_CCI = 2, /**< CDC2 CCI interface descriptor ID */
+			INTERFACE_ID_CDC2_DCI = 3, /**< CDC2 DCI interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c
new file mode 100644
index 000000000..b94a67dab
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c
@@ -0,0 +1,299 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the DualVirtualSerial demo. This file contains the main tasks of the demo and
+ *  is responsible for the initial application hardware configuration.
+ */
+
+#include "DualVirtualSerial.h"
+
+/** Contains the current baud rate and other settings of the first virtual serial port. While this demo does not use
+ *  the physical USART and thus does not use these settings, they must still be retained and returned to the host
+ *  upon request or the host will assume the device is non-functional.
+ *
+ *  These values are set by the host via a class-specific request, however they are not required to be used accurately.
+ *  It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
+ *  serial link characteristics and instead sends and receives data in endpoint streams.
+ */
+static CDC_LineEncoding_t LineEncoding1 = { .BaudRateBPS = 0,
+                                            .CharFormat  = CDC_LINEENCODING_OneStopBit,
+                                            .ParityType  = CDC_PARITY_None,
+                                            .DataBits    = 8                            };
+
+/** Contains the current baud rate and other settings of the second virtual serial port. While this demo does not use
+ *  the physical USART and thus does not use these settings, they must still be retained and returned to the host
+ *  upon request or the host will assume the device is non-functional.
+ *
+ *  These values are set by the host via a class-specific request, however they are not required to be used accurately.
+ *  It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
+ *  serial link characteristics and instead sends and receives data in endpoint streams.
+ */
+static CDC_LineEncoding_t LineEncoding2 = { .BaudRateBPS = 0,
+                                            .CharFormat  = CDC_LINEENCODING_OneStopBit,
+                                            .ParityType  = CDC_PARITY_None,
+                                            .DataBits    = 8                            };
+
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		CDC1_Task();
+		CDC2_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Device_Connect(void)
+{
+	/* Indicate USB enumerating */
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs and stops the USB management and CDC management tasks.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Indicate USB not ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
+ *  of the USB device after enumeration - the device endpoints are configured and the CDC management tasks are started.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup first CDC Interface's Endpoints */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1);
+
+	/* Setup second CDC Interface's Endpoints */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1);
+
+	/* Reset line encoding baud rates so that the host knows to send new values */
+	LineEncoding1.BaudRateBPS = 0;
+	LineEncoding2.BaudRateBPS = 0;
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	/* Determine which interface's Line Coding data is being set from the wIndex parameter */
+	void* LineEncodingData = (USB_ControlRequest.wIndex == 0) ? &LineEncoding1 : &LineEncoding2;
+
+	/* Process CDC specific control requests */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case CDC_REQ_GetLineEncoding:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Write the line coding data to the control endpoint */
+				Endpoint_Write_Control_Stream_LE(LineEncodingData, sizeof(CDC_LineEncoding_t));
+				Endpoint_ClearOUT();
+			}
+
+			break;
+		case CDC_REQ_SetLineEncoding:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Read the line coding data in from the host into the global struct */
+				Endpoint_Read_Control_Stream_LE(LineEncodingData, sizeof(CDC_LineEncoding_t));
+				Endpoint_ClearIN();
+			}
+
+			break;
+		case CDC_REQ_SetControlLineState:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+	}
+}
+
+/** Function to manage CDC data transmission and reception to and from the host for the first CDC interface, which sends joystick
+ *  movements to the host as ASCII strings.
+ */
+void CDC1_Task(void)
+{
+	char*       ReportString    = NULL;
+	uint8_t     JoyStatus_LCL   = Joystick_GetStatus();
+	static bool ActionSent      = false;
+
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	/* Determine if a joystick action has occurred */
+	if (JoyStatus_LCL & JOY_UP)
+	  ReportString = "Joystick Up\r\n";
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  ReportString = "Joystick Down\r\n";
+	else if (JoyStatus_LCL & JOY_LEFT)
+	  ReportString = "Joystick Left\r\n";
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  ReportString = "Joystick Right\r\n";
+	else if (JoyStatus_LCL & JOY_PRESS)
+	  ReportString = "Joystick Pressed\r\n";
+	else
+	  ActionSent = false;
+
+	/* Flag management - Only allow one string to be sent per action */
+	if ((ReportString != NULL) && (ActionSent == false) && LineEncoding1.BaudRateBPS)
+	{
+		ActionSent = true;
+
+		/* Select the Serial Tx Endpoint */
+		Endpoint_SelectEndpoint(CDC1_TX_EPADDR);
+
+		/* Write the String to the Endpoint */
+		Endpoint_Write_Stream_LE(ReportString, strlen(ReportString), NULL);
+
+		/* Finalize the stream transfer to send the last packet */
+		Endpoint_ClearIN();
+
+		/* Wait until the endpoint is ready for another packet */
+		Endpoint_WaitUntilReady();
+
+		/* Send an empty packet to ensure that the host does not buffer data sent to it */
+		Endpoint_ClearIN();
+	}
+
+	/* Select the Serial Rx Endpoint */
+	Endpoint_SelectEndpoint(CDC1_RX_EPADDR);
+
+	/* Throw away any received data from the host */
+	if (Endpoint_IsOUTReceived())
+	  Endpoint_ClearOUT();
+}
+
+/** Function to manage CDC data transmission and reception to and from the host for the second CDC interface, which echoes back
+ *  all data sent to it from the host.
+ */
+void CDC2_Task(void)
+{
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	/* Select the Serial Rx Endpoint */
+	Endpoint_SelectEndpoint(CDC2_RX_EPADDR);
+
+	/* Check to see if any data has been received */
+	if (Endpoint_IsOUTReceived())
+	{
+		/* Create a temp buffer big enough to hold the incoming endpoint packet */
+		uint8_t  Buffer[Endpoint_BytesInEndpoint()];
+
+		/* Remember how large the incoming packet is */
+		uint16_t DataLength = Endpoint_BytesInEndpoint();
+
+		/* Read in the incoming packet into the buffer */
+		Endpoint_Read_Stream_LE(&Buffer, DataLength, NULL);
+
+		/* Finalize the stream transfer to send the last packet */
+		Endpoint_ClearOUT();
+
+		/* Select the Serial Tx Endpoint */
+		Endpoint_SelectEndpoint(CDC2_TX_EPADDR);
+
+		/* Write the received data to the endpoint */
+		Endpoint_Write_Stream_LE(&Buffer, DataLength, NULL);
+
+		/* Finalize the stream transfer to send the last packet */
+		Endpoint_ClearIN();
+
+		/* Wait until the endpoint is ready for the next packet */
+		Endpoint_WaitUntilReady();
+
+		/* Send an empty packet to prevent host buffering */
+		Endpoint_ClearIN();
+	}
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h
new file mode 100644
index 000000000..56a510b7a
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h
@@ -0,0 +1,77 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for DualVirtualSerial.c.
+ */
+
+#ifndef _DUAL_VIRTUALSERIAL_H_
+#define _DUAL_VIRTUALSERIAL_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void CDC1_Task(void);
+		void CDC2_Task(void);
+		void SetupHardware(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt
new file mode 100644
index 000000000..fb763b7a2
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt
@@ -0,0 +1,89 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Dual Communications Device Class (Dual Virtual Serial Port) Device
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Abstract Control Model (ACM)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF CDC Class Standard</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Interface Association Descriptor ECN \n
+ *        USBIF CDC Class Standard</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Dual Communications Device Class demonstration application.
+ *  This gives a simple reference application for implementing
+ *  a compound device with dual CDC functions acting as a pair
+ *  of virtual serial ports. This demo uses Interface Association
+ *  Descriptors to link together the pair of related CDC
+ *  descriptors for each virtual serial port, which may not be
+ *  supported in all OSes - Windows Vista is supported, as is
+ *  XP (although the latter may need a hotfix to function).
+ *
+ *  Joystick actions are transmitted to the host as strings
+ *  through the first serial port. The device does not respond to
+ *  serial data sent from the host in the first serial port.
+ *
+ *  The second serial port echoes back data sent from the host.
+ *
+ *  After running this demo for the first time on a new computer,
+ *  you will need to supply the .INF file located in this demo
+ *  project's directory as the device's driver when running under
+ *  Windows. This will enable Windows to use its inbuilt CDC drivers,
+ *  negating the need for custom drivers for the device. Other
+ *  Operating Systems should automatically use their own inbuilt
+ *  CDC-ACM drivers.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/LUFA DualVirtualSerial.inf b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/LUFA DualVirtualSerial.inf
new file mode 100644
index 000000000..1a0e0248a
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/LUFA DualVirtualSerial.inf
@@ -0,0 +1,66 @@
+;************************************************************
+; Windows USB CDC ACM Setup File
+; Copyright (c) 2000 Microsoft Corporation
+;************************************************************
+
+[DefaultInstall]
+CopyINF="LUFA DualVirtualSerial.inf"
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%MFGNAME%
+DriverVer=7/1/2012,10.0.0.0
+
+[Manufacturer]
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
+
+[SourceDisksNames]
+
+[SourceDisksFiles]
+
+[DestinationDirs]
+DefaultDestDir=12
+
+[DriverInstall]
+Include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.AddReg
+
+[DriverInstall.Services]
+Include=mdmcpq.inf
+AddService=usbser, 0x00000002, LowerFilter_Service_Inst
+
+[DriverInstall.AddReg]
+HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
+
+;------------------------------------------------------------------------------
+;  Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID.  Use the format as shown below.
+; Note: One INF file can be used for multiple devices with different VID and PIDs.
+; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
+
+[DeviceList.NTx86]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
+
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
+
+;------------------------------------------------------------------------------
+;  String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+MFGNAME="http://www.lufa-lib.org"
+DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"
\ No newline at end of file
diff --git a/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/asf.xml b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/asf.xml
new file mode 100644
index 000000000..133d1b4f8
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/asf.xml
@@ -0,0 +1,62 @@
+<asf xmlversion="1.0">

+	<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.avr8">

+		<require idref="lufa.demos.device.lowlevel.dual_cdc"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.xmega">

+		<require idref="lufa.demos.device.lowlevel.dual_cdc"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.lowlevel.dual_cdc" caption="Dual Virtual Serial Device Demo (Low Level APIs)">

+		<info type="description" value="summary">

+		Dual Virtual Serial (CDC) demo, implementing a pair of virtual serial port interfaces. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Low Level APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="CDC Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="DualVirtualSerial.txt"/>

+		<build type="distribute" subtype="user-file" value="LUFA DualVirtualSerial.inf"/>

+

+		<build type="c-source" value="DualVirtualSerial.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="DualVirtualSerial.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.joystick"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/doxyfile b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/doxyfile
new file mode 100644
index 000000000..40dcfe915
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Dual Virtual Serial Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/makefile b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/makefile
new file mode 100644
index 000000000..c91ec4f88
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = DualVirtualSerial
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/LowLevel/GenericHID/Config/AppConfig.h b/lib/lufa/Demos/Device/LowLevel/GenericHID/Config/AppConfig.h
new file mode 100644
index 000000000..636200ec6
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/GenericHID/Config/AppConfig.h
@@ -0,0 +1,48 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define GENERIC_REPORT_SIZE       8
+
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/GenericHID/Config/LUFAConfig.h b/lib/lufa/Demos/Device/LowLevel/GenericHID/Config/LUFAConfig.h
new file mode 100644
index 000000000..00eefc7bf
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/GenericHID/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               2
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/GenericHID/Descriptors.c b/lib/lufa/Demos/Device/LowLevel/GenericHID/Descriptors.c
new file mode 100644
index 000000000..2a248075a
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/GenericHID/Descriptors.c
@@ -0,0 +1,238 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** HID class report descriptor. This is a special descriptor constructed with values from the
+ *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
+ *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
+ *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
+ *  more details on HID report descriptors.
+ */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] =
+{
+	HID_RI_USAGE_PAGE(16, 0xFF00), /* Vendor Page 0 */
+	HID_RI_USAGE(8, 0x01), /* Vendor Usage 1 */
+	HID_RI_COLLECTION(8, 0x01), /* Vendor Usage 1 */
+	    HID_RI_USAGE(8, 0x02), /* Vendor Usage 2 */
+	    HID_RI_LOGICAL_MINIMUM(8, 0x00),
+	    HID_RI_LOGICAL_MAXIMUM(8, 0xFF),
+	    HID_RI_REPORT_SIZE(8, 0x08),
+	    HID_RI_REPORT_COUNT(8, GENERIC_REPORT_SIZE),
+	    HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+	    HID_RI_USAGE(8, 0x03), /* Vendor Usage 3 */
+	    HID_RI_LOGICAL_MINIMUM(8, 0x00),
+	    HID_RI_LOGICAL_MAXIMUM(8, 0xFF),
+	    HID_RI_REPORT_SIZE(8, 0x08),
+	    HID_RI_REPORT_COUNT(8, GENERIC_REPORT_SIZE),
+	    HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
+	HID_RI_END_COLLECTION(0),
+};
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x204F,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.HID_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_GenericHID,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_NonBootSubclass,
+			.Protocol               = HID_CSCP_NonBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID_GenericHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(GenericReport)
+		},
+
+	.HID_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = GENERIC_IN_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = GENERIC_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.HID_ReportOUTEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = GENERIC_OUT_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = GENERIC_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Generic HID Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+		case HID_DTYPE_HID:
+			Address = &ConfigurationDescriptor.HID_GenericHID;
+			Size    = sizeof(USB_HID_Descriptor_HID_t);
+			break;
+		case HID_DTYPE_Report:
+			Address = &GenericReport;
+			Size    = sizeof(GenericReport);
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/GenericHID/Descriptors.h b/lib/lufa/Demos/Device/LowLevel/GenericHID/Descriptors.h
new file mode 100644
index 000000000..30fc7e1ea
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/GenericHID/Descriptors.h
@@ -0,0 +1,99 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+		#include "Config/AppConfig.h"
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Generic HID Interface
+			USB_Descriptor_Interface_t            HID_Interface;
+			USB_HID_Descriptor_HID_t              HID_GenericHID;
+			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
+			USB_Descriptor_Endpoint_t             HID_ReportOUTEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_GenericHID = 0, /**< GenericHID interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Macros: */
+		/** Endpoint address of the Generic HID reporting IN endpoint. */
+		#define GENERIC_IN_EPADDR         (ENDPOINT_DIR_IN  | 1)
+
+		/** Endpoint address of the Generic HID reporting OUT endpoint. */
+		#define GENERIC_OUT_EPADDR        (ENDPOINT_DIR_OUT | 2)
+
+		/** Size in bytes of the Generic HID reporting endpoint. */
+		#define GENERIC_EPSIZE            8
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/GenericHID/GenericHID.c b/lib/lufa/Demos/Device/LowLevel/GenericHID/GenericHID.c
new file mode 100644
index 000000000..916457a2f
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/GenericHID/GenericHID.c
@@ -0,0 +1,253 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the GenericHID demo. This file contains the main tasks of the demo and
+ *  is responsible for the initial application hardware configuration.
+ */
+
+#include "GenericHID.h"
+
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		HID_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Device_Connect(void)
+{
+	/* Indicate USB enumerating */
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs and stops the USB management task.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Indicate USB not ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
+ *  of the USB device after enumeration, and configures the generic HID device endpoints.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup HID Report Endpoints */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(GENERIC_IN_EPADDR, EP_TYPE_INTERRUPT, GENERIC_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(GENERIC_OUT_EPADDR, EP_TYPE_INTERRUPT, GENERIC_EPSIZE, 1);
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	/* Handle HID Class specific requests */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case HID_REQ_GetReport:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				uint8_t GenericData[GENERIC_REPORT_SIZE];
+				CreateGenericHIDReport(GenericData);
+
+				Endpoint_ClearSETUP();
+
+				/* Write the report data to the control endpoint */
+				Endpoint_Write_Control_Stream_LE(&GenericData, sizeof(GenericData));
+				Endpoint_ClearOUT();
+			}
+
+			break;
+		case HID_REQ_SetReport:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				uint8_t GenericData[GENERIC_REPORT_SIZE];
+
+				Endpoint_ClearSETUP();
+
+				/* Read the report data from the control endpoint */
+				Endpoint_Read_Control_Stream_LE(&GenericData, sizeof(GenericData));
+				Endpoint_ClearIN();
+
+				ProcessGenericHIDReport(GenericData);
+			}
+
+			break;
+	}
+}
+
+/** Function to process the last received report from the host.
+ *
+ *  \param[in] DataArray  Pointer to a buffer where the last received report has been stored
+ */
+void ProcessGenericHIDReport(uint8_t* DataArray)
+{
+	/*
+		This is where you need to process reports sent from the host to the device. This
+		function is called each time the host has sent a new report. DataArray is an array
+		holding the report sent from the host.
+	*/
+
+	uint8_t NewLEDMask = LEDS_NO_LEDS;
+
+	if (DataArray[0])
+	  NewLEDMask |= LEDS_LED1;
+
+	if (DataArray[1])
+	  NewLEDMask |= LEDS_LED2;
+
+	if (DataArray[2])
+	  NewLEDMask |= LEDS_LED3;
+
+	if (DataArray[3])
+	  NewLEDMask |= LEDS_LED4;
+
+	LEDs_SetAllLEDs(NewLEDMask);
+}
+
+/** Function to create the next report to send back to the host at the next reporting interval.
+ *
+ *  \param[out] DataArray  Pointer to a buffer where the next report data should be stored
+ */
+void CreateGenericHIDReport(uint8_t* DataArray)
+{
+	/*
+		This is where you need to create reports to be sent to the host from the device. This
+		function is called each time the host is ready to accept a new report. DataArray is
+		an array to hold the report to the host.
+	*/
+
+	uint8_t CurrLEDMask = LEDs_GetLEDs();
+
+	DataArray[0] = ((CurrLEDMask & LEDS_LED1) ? 1 : 0);
+	DataArray[1] = ((CurrLEDMask & LEDS_LED2) ? 1 : 0);
+	DataArray[2] = ((CurrLEDMask & LEDS_LED3) ? 1 : 0);
+	DataArray[3] = ((CurrLEDMask & LEDS_LED4) ? 1 : 0);
+}
+
+void HID_Task(void)
+{
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	Endpoint_SelectEndpoint(GENERIC_OUT_EPADDR);
+
+	/* Check to see if a packet has been sent from the host */
+	if (Endpoint_IsOUTReceived())
+	{
+		/* Check to see if the packet contains data */
+		if (Endpoint_IsReadWriteAllowed())
+		{
+			/* Create a temporary buffer to hold the read in report from the host */
+			uint8_t GenericData[GENERIC_REPORT_SIZE];
+
+			/* Read Generic Report Data */
+			Endpoint_Read_Stream_LE(&GenericData, sizeof(GenericData), NULL);
+
+			/* Process Generic Report Data */
+			ProcessGenericHIDReport(GenericData);
+		}
+
+		/* Finalize the stream transfer to send the last packet */
+		Endpoint_ClearOUT();
+	}
+
+	Endpoint_SelectEndpoint(GENERIC_IN_EPADDR);
+
+	/* Check to see if the host is ready to accept another packet */
+	if (Endpoint_IsINReady())
+	{
+		/* Create a temporary buffer to hold the report to send to the host */
+		uint8_t GenericData[GENERIC_REPORT_SIZE];
+
+		/* Create Generic Report Data */
+		CreateGenericHIDReport(GenericData);
+
+		/* Write Generic Report Data */
+		Endpoint_Write_Stream_LE(&GenericData, sizeof(GenericData), NULL);
+
+		/* Finalize the stream transfer to send the last packet */
+		Endpoint_ClearIN();
+	}
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/GenericHID/GenericHID.h b/lib/lufa/Demos/Device/LowLevel/GenericHID/GenericHID.h
new file mode 100644
index 000000000..4e6100c43
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/GenericHID/GenericHID.h
@@ -0,0 +1,81 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for GenericHID.c.
+ */
+
+#ifndef _GENERICHID_H_
+#define _GENERICHID_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdbool.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+		#include "Config/AppConfig.h"
+
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void HID_Task(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+		void EVENT_USB_Device_StartOfFrame(void);
+
+		void ProcessGenericHIDReport(uint8_t* DataArray);
+		void CreateGenericHIDReport(uint8_t* DataArray);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/GenericHID/GenericHID.txt b/lib/lufa/Demos/Device/LowLevel/GenericHID/GenericHID.txt
new file mode 100644
index 000000000..0d780f49d
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/GenericHID/GenericHID.txt
@@ -0,0 +1,79 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Generic HID Device
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Human Interface Device (HID)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>N/A</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Low Speed Mode \n
+ *        Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Generic HID device demonstration application. This gives a simple reference application
+ *  for implementing a generic HID device, using the basic USB HID drivers in all modern
+ *  OSes (i.e. no special drivers required). By default it accepts and sends up to 8 byte reports
+ *  to and from a USB Host, and transmits the last sent report back to the host.
+ *
+ *  On start-up the system will automatically enumerate and function as a vendor HID device.
+ *  When controlled by a custom HID class application, reports can be sent and received by
+ *  both the standard data endpoint and control request methods defined in the HID specification.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>GENERIC_REPORT_SIZE</td>
+ *    <td>AppConfig.h</td>
+ *    <td>This token defines the size of the device reports, both sent and received (including report ID byte). The value
+ *        must be an integer ranging from 1 to 255.</td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/LowLevel/GenericHID/HostTestApp/test_generic_hid.py b/lib/lufa/Demos/Device/LowLevel/GenericHID/HostTestApp/test_generic_hid.py
new file mode 100644
index 000000000..1e5f43019
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/GenericHID/HostTestApp/test_generic_hid.py
@@ -0,0 +1,96 @@
+"""
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+"""
+
+"""
+    LUFA Generic HID device demo host test script. This script will send a
+    continuous stream of generic reports to the device, to show a variable LED
+    pattern on the target board. Send and received report data is printed to
+    the terminal.
+
+    Requires the pywinusb library (https://pypi.python.org/pypi/pywinusb/).
+"""
+
+import sys
+from time import sleep
+import pywinusb.hid as hid
+
+# Generic HID device VID, PID and report payload length (length is increased
+# by one to account for the Report ID byte that must be pre-pended)
+device_vid = 0x03EB
+device_pid = 0x204F
+report_length = 1 + 8
+
+
+def get_hid_device_handle():
+    hid_device_filter = hid.HidDeviceFilter(vendor_id=device_vid,
+                                            product_id=device_pid)
+
+    valid_hid_devices = hid_device_filter.get_devices()
+
+    if len(valid_hid_devices) is 0:
+        return None
+    else:
+        return valid_hid_devices[0]
+
+
+def send_led_pattern(device, led1, led2, led3, led4):
+    # Report data for the demo is the report ID (always zero) followed by the
+    # LED on/off data
+    report_data = [0, led1, led2, led3, led4]
+
+    # Zero-extend the array to the length the report should be
+    report_data.extend([0] * (report_length - len(report_data)))
+
+    # Send the generated report to the device
+    device.send_output_report(report_data)
+
+    print("Sent LED Pattern: {0}".format(report_data[1:5]))
+
+
+def received_led_pattern(report_data):
+    print("Received LED Pattern: {0}".format(report_data[1:5]))
+
+
+def main():
+    hid_device = get_hid_device_handle()
+
+    if hid_device is None:
+        print("No valid HID device found.")
+        sys.exit(1)
+
+    try:
+        hid_device.open()
+
+        print("Connected to device 0x%04X/0x%04X - %s [%s]" %
+              (hid_device.vendor_id, hid_device.product_id,
+               hid_device.product_name, hid_device.vendor_name))
+
+        # Set up the HID input report handler to receive reports
+        hid_device.set_raw_data_handler(received_led_pattern)
+
+        p = 0
+        while (hid_device.is_plugged()):
+            # Convert the current pattern index to a bit-mask and send
+            send_led_pattern(hid_device,
+                             (p >> 3) & 1,
+                             (p >> 2) & 1,
+                             (p >> 1) & 1,
+                             (p >> 0) & 1)
+
+            # Compute next LED pattern in sequence
+            p = (p + 1) % 16
+
+            # Delay a bit for visual effect
+            sleep(.2)
+
+    finally:
+        hid_device.close()
+
+
+if __name__ == '__main__':
+    main()
diff --git a/lib/lufa/Demos/Device/LowLevel/GenericHID/asf.xml b/lib/lufa/Demos/Device/LowLevel/GenericHID/asf.xml
new file mode 100644
index 000000000..cf1fb8009
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/GenericHID/asf.xml
@@ -0,0 +1,63 @@
+<asf xmlversion="1.0">

+	<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.avr8">

+		<require idref="lufa.demos.device.lowlevel.generic_hid"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.xmega">

+		<require idref="lufa.demos.device.lowlevel.generic_hid"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.lowlevel.generic_hid" caption="Generic HID Device Demo (Low Level APIs)">

+		<info type="description" value="summary">

+		Generic HID device demo, implementing a device whose LEDs can be controlled via HID messages from the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Low Level APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="HID Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="GenericHID.txt"/>

+		<build type="distribute" subtype="directory" value="HostTestApp"/>

+

+		<build type="c-source" value="GenericHID.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="GenericHID.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

+		<build type="header-file" value="Config/AppConfig.h"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/LowLevel/GenericHID/doxyfile b/lib/lufa/Demos/Device/LowLevel/GenericHID/doxyfile
new file mode 100644
index 000000000..ffc0d0590
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/GenericHID/doxyfile
@@ -0,0 +1,2396 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Generic HID Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/ \
+                         HostTestApp/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/LowLevel/GenericHID/makefile b/lib/lufa/Demos/Device/LowLevel/GenericHID/makefile
new file mode 100644
index 000000000..7cd0aac47
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/GenericHID/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = GenericHID
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/LowLevel/Joystick/Config/LUFAConfig.h b/lib/lufa/Demos/Device/LowLevel/Joystick/Config/LUFAConfig.h
new file mode 100644
index 000000000..299d2ec85
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Joystick/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               1
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/Joystick/Descriptors.c b/lib/lufa/Demos/Device/LowLevel/Joystick/Descriptors.c
new file mode 100644
index 000000000..45949897c
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Joystick/Descriptors.c
@@ -0,0 +1,240 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** HID class report descriptor. This is a special descriptor constructed with values from the
+ *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
+ *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
+ *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
+ *  more details on HID report descriptors.
+ */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM JoystickReport[] =
+{
+	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+	HID_RI_USAGE(8, 0x04), /* Joystick */
+	HID_RI_COLLECTION(8, 0x01), /* Application */
+		HID_RI_USAGE(8, 0x01), /* Pointer */
+		HID_RI_COLLECTION(8, 0x00), /* Physical */
+			HID_RI_USAGE(8, 0x30), /* Usage X */
+			HID_RI_USAGE(8, 0x31), /* Usage Y */
+			HID_RI_USAGE(8, 0x32), /* Usage Z */
+			HID_RI_LOGICAL_MINIMUM(8, -100),
+			HID_RI_LOGICAL_MAXIMUM(8, 100),
+			HID_RI_PHYSICAL_MINIMUM(8, -1),
+			HID_RI_PHYSICAL_MAXIMUM(8, 1),
+			HID_RI_REPORT_COUNT(8, 0x03),
+			HID_RI_REPORT_SIZE(8, 0x08),
+			HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+		HID_RI_END_COLLECTION(0),
+		HID_RI_USAGE_PAGE(8, 0x09), /* Button */
+		HID_RI_USAGE_MINIMUM(8, 0x01),
+		HID_RI_USAGE_MAXIMUM(8, 0x02),
+		HID_RI_LOGICAL_MINIMUM(8, 0x00),
+		HID_RI_LOGICAL_MAXIMUM(8, 0x01),
+		HID_RI_REPORT_SIZE(8, 0x01),
+		HID_RI_REPORT_COUNT(8, 0x02),
+		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+		HID_RI_REPORT_SIZE(8, 0x06),
+		HID_RI_REPORT_COUNT(8, 0x01),
+		HID_RI_INPUT(8, HID_IOF_CONSTANT),
+	HID_RI_END_COLLECTION(0),
+};
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2043,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.HID_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_Joystick,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_NonBootSubclass,
+			.Protocol               = HID_CSCP_NonBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID_JoystickHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(JoystickReport)
+		},
+
+	.HID_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = JOYSTICK_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = JOYSTICK_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Joystick Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+		case DTYPE_HID:
+			Address = &ConfigurationDescriptor.HID_JoystickHID;
+			Size    = sizeof(USB_HID_Descriptor_HID_t);
+			break;
+		case DTYPE_Report:
+			Address = &JoystickReport;
+			Size    = sizeof(JoystickReport);
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Joystick/Descriptors.h b/lib/lufa/Demos/Device/LowLevel/Joystick/Descriptors.h
new file mode 100644
index 000000000..30ab1059b
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Joystick/Descriptors.h
@@ -0,0 +1,99 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Joystick HID Interface
+			USB_Descriptor_Interface_t            HID_Interface;
+			USB_HID_Descriptor_HID_t              HID_JoystickHID;
+			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_Joystick = 0, /**< Joystick interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Macros: */
+		/** Endpoint address of the Joystick HID reporting IN endpoint. */
+		#define JOYSTICK_EPADDR           (ENDPOINT_DIR_IN | 1)
+
+		/** Size in bytes of the Joystick HID reporting IN endpoint. */
+		#define JOYSTICK_EPSIZE           8
+
+		/** Descriptor header type value, to indicate a HID class HID descriptor. */
+		#define DTYPE_HID                 0x21
+
+		/** Descriptor header type value, to indicate a HID class HID report descriptor. */
+		#define DTYPE_Report              0x22
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Joystick/Joystick.c b/lib/lufa/Demos/Device/LowLevel/Joystick/Joystick.c
new file mode 100644
index 000000000..7536d1a5f
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Joystick/Joystick.c
@@ -0,0 +1,217 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the Joystick demo. This file contains the main tasks of the demo and
+ *  is responsible for the initial application hardware configuration.
+ */
+
+#include "Joystick.h"
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		HID_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	Buttons_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Device_Connect(void)
+{
+	/* Indicate USB enumerating */
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs and stops the USB management and joystick reporting tasks.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Indicate USB not ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
+ *  of the USB device after enumeration - the device endpoints are configured and the joystick reporting task started.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup HID Report Endpoint */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(JOYSTICK_EPADDR, EP_TYPE_INTERRUPT, JOYSTICK_EPSIZE, 1);
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	/* Handle HID Class specific requests */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case HID_REQ_GetReport:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				USB_JoystickReport_Data_t JoystickReportData;
+
+				/* Create the next HID report to send to the host */
+				GetNextReport(&JoystickReportData);
+
+				Endpoint_ClearSETUP();
+
+				/* Write the report data to the control endpoint */
+				Endpoint_Write_Control_Stream_LE(&JoystickReportData, sizeof(JoystickReportData));
+				Endpoint_ClearOUT();
+			}
+
+			break;
+	}
+}
+
+/** Fills the given HID report data structure with the next HID report to send to the host.
+ *
+ *  \param[out] ReportData  Pointer to a HID report data structure to be filled
+ *
+ *  \return Boolean \c true if the new report differs from the last report, \c false otherwise
+ */
+bool GetNextReport(USB_JoystickReport_Data_t* const ReportData)
+{
+	static uint8_t PrevJoyStatus    = 0;
+	static uint8_t PrevButtonStatus = 0;
+	uint8_t        JoyStatus_LCL    = Joystick_GetStatus();
+	uint8_t        ButtonStatus_LCL = Buttons_GetStatus();
+	bool           InputChanged     = false;
+
+	/* Clear the report contents */
+	memset(ReportData, 0, sizeof(USB_JoystickReport_Data_t));
+
+	if (JoyStatus_LCL & JOY_UP)
+	  ReportData->Y = -100;
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  ReportData->Y =  100;
+
+	if (JoyStatus_LCL & JOY_LEFT)
+	  ReportData->X = -100;
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  ReportData->X =  100;
+
+	if (JoyStatus_LCL & JOY_PRESS)
+	  ReportData->Button |= (1 << 1);
+
+	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
+	  ReportData->Button |= (1 << 0);
+
+	/* Check if the new report is different to the previous report */
+	InputChanged = (uint8_t)(PrevJoyStatus ^ JoyStatus_LCL) | (uint8_t)(PrevButtonStatus ^ ButtonStatus_LCL);
+
+	/* Save the current joystick status for later comparison */
+	PrevJoyStatus    = JoyStatus_LCL;
+	PrevButtonStatus = ButtonStatus_LCL;
+
+	/* Return whether the new report is different to the previous report or not */
+	return InputChanged;
+}
+
+/** Function to manage HID report generation and transmission to the host. */
+void HID_Task(void)
+{
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	/* Select the Joystick Report Endpoint */
+	Endpoint_SelectEndpoint(JOYSTICK_EPADDR);
+
+	/* Check to see if the host is ready for another packet */
+	if (Endpoint_IsINReady())
+	{
+		USB_JoystickReport_Data_t JoystickReportData;
+
+		/* Create the next HID report to send to the host */
+		GetNextReport(&JoystickReportData);
+
+		/* Write Joystick Report Data */
+		Endpoint_Write_Stream_LE(&JoystickReportData, sizeof(JoystickReportData), NULL);
+
+		/* Finalize the stream transfer to send the last packet */
+		Endpoint_ClearIN();
+
+		/* Clear the report data afterwards */
+		memset(&JoystickReportData, 0, sizeof(JoystickReportData));
+	}
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Joystick/Joystick.h b/lib/lufa/Demos/Device/LowLevel/Joystick/Joystick.h
new file mode 100644
index 000000000..d5fdcccbd
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Joystick/Joystick.h
@@ -0,0 +1,91 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Joystick.c.
+ */
+
+#ifndef _JOYSTICK_H_
+#define _JOYSTICK_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Type Defines: */
+		/** Type define for the joystick HID report structure, for creating and sending HID reports to the host PC.
+		 *  This mirrors the layout described to the host in the HID report descriptor, in Descriptors.c.
+		 */
+		typedef struct
+		{
+			int8_t  X; /**< Current absolute joystick X position, as a signed 8-bit integer */
+			int8_t  Y; /**< Current absolute joystick Y position, as a signed 8-bit integer */
+			int8_t  Z; /**< Current absolute joystick Z position, as a signed 8-bit integer */
+			uint8_t Button; /**< Bit mask of the currently pressed joystick buttons */
+		} USB_JoystickReport_Data_t;
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void HID_Task(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+		bool GetNextReport(USB_JoystickReport_Data_t* const ReportData);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Joystick/Joystick.txt b/lib/lufa/Demos/Device/LowLevel/Joystick/Joystick.txt
new file mode 100644
index 000000000..b174642f4
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Joystick/Joystick.txt
@@ -0,0 +1,77 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Joystick Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Human Interface Device (HID)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>N/A</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Low Speed Mode \n
+ *        Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Joystick demonstration application. This gives a simple reference
+ *  application for implementing a USB Keyboard device, for USB Joysticks
+ *  using the standard Keyboard HID profile.
+ *
+ *  This device will show up as a generic joystick device, with two buttons.
+ *  Pressing the joystick inwards is the first button, and the HWB button
+ *  is the second.
+ *
+ *  Moving the joystick on the selected board moves the joystick location on
+ *  the host computer.
+ *
+ *  Currently only single interface joysticks are supported.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Joystick/asf.xml b/lib/lufa/Demos/Device/LowLevel/Joystick/asf.xml
new file mode 100644
index 000000000..d37741bac
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Joystick/asf.xml
@@ -0,0 +1,62 @@
+<asf xmlversion="1.0">

+	<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.avr8">

+		<require idref="lufa.demos.device.lowlevel.joystick"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.xmega">

+		<require idref="lufa.demos.device.lowlevel.joystick"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.lowlevel.joystick" caption="Joystick HID Device Demo (Low Level APIs)">

+		<info type="description" value="summary">

+		Joystick HID device demo, implementing a basic USB joystick that can send movement information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Low Level APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="HID Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="Joystick.txt"/>

+

+		<build type="c-source" value="Joystick.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="Joystick.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.buttons"/>

+		<require idref="lufa.drivers.board.joystick"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/LowLevel/Joystick/doxyfile b/lib/lufa/Demos/Device/LowLevel/Joystick/doxyfile
new file mode 100644
index 000000000..45ebd1341
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Joystick/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Joystick Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/LowLevel/Joystick/makefile b/lib/lufa/Demos/Device/LowLevel/Joystick/makefile
new file mode 100644
index 000000000..8a29ff4d0
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Joystick/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = Joystick
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/LowLevel/Keyboard/Config/LUFAConfig.h b/lib/lufa/Demos/Device/LowLevel/Keyboard/Config/LUFAConfig.h
new file mode 100644
index 000000000..00eefc7bf
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Keyboard/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               2
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/Keyboard/Descriptors.c b/lib/lufa/Demos/Device/LowLevel/Keyboard/Descriptors.c
new file mode 100644
index 000000000..d0e5bc445
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Keyboard/Descriptors.c
@@ -0,0 +1,255 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** HID class report descriptor. This is a special descriptor constructed with values from the
+ *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
+ *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
+ *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
+ *  more details on HID report descriptors.
+ */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
+{
+	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+	HID_RI_USAGE(8, 0x06), /* Keyboard */
+	HID_RI_COLLECTION(8, 0x01), /* Application */
+		HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */
+		HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */
+		HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */
+		HID_RI_LOGICAL_MINIMUM(8, 0x00),
+		HID_RI_LOGICAL_MAXIMUM(8, 0x01),
+		HID_RI_REPORT_SIZE(8, 0x01),
+		HID_RI_REPORT_COUNT(8, 0x08),
+		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+		HID_RI_REPORT_COUNT(8, 0x01),
+		HID_RI_REPORT_SIZE(8, 0x08),
+		HID_RI_INPUT(8, HID_IOF_CONSTANT),
+		HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */
+		HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */
+		HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */
+		HID_RI_REPORT_COUNT(8, 0x05),
+		HID_RI_REPORT_SIZE(8, 0x01),
+		HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
+		HID_RI_REPORT_COUNT(8, 0x01),
+		HID_RI_REPORT_SIZE(8, 0x03),
+		HID_RI_OUTPUT(8, HID_IOF_CONSTANT),
+		HID_RI_LOGICAL_MINIMUM(8, 0x00),
+		HID_RI_LOGICAL_MAXIMUM(8, 0x65),
+		HID_RI_USAGE_PAGE(8, 0x07), /* Keyboard */
+		HID_RI_USAGE_MINIMUM(8, 0x00), /* Reserved (no event indicated) */
+		HID_RI_USAGE_MAXIMUM(8, 0x65), /* Keyboard Application */
+		HID_RI_REPORT_COUNT(8, 0x06),
+		HID_RI_REPORT_SIZE(8, 0x08),
+		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
+	HID_RI_END_COLLECTION(0),
+};
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2042,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.HID_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_Keyboard,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_BootSubclass,
+			.Protocol               = HID_CSCP_KeyboardBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID_KeyboardHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(KeyboardReport)
+		},
+
+	.HID_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = KEYBOARD_IN_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = KEYBOARD_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.HID_ReportOUTEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = KEYBOARD_OUT_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = KEYBOARD_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Keyboard Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+		case HID_DTYPE_HID:
+			Address = &ConfigurationDescriptor.HID_KeyboardHID;
+			Size    = sizeof(USB_HID_Descriptor_HID_t);
+			break;
+		case HID_DTYPE_Report:
+			Address = &KeyboardReport;
+			Size    = sizeof(KeyboardReport);
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Keyboard/Descriptors.h b/lib/lufa/Demos/Device/LowLevel/Keyboard/Descriptors.h
new file mode 100644
index 000000000..f9d26e482
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Keyboard/Descriptors.h
@@ -0,0 +1,98 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Keyboard HID Interface
+			USB_Descriptor_Interface_t            HID_Interface;
+			USB_HID_Descriptor_HID_t              HID_KeyboardHID;
+			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
+			USB_Descriptor_Endpoint_t             HID_ReportOUTEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_Keyboard = 0, /**< Keyboard interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Macros: */
+		/** Endpoint address of the Keyboard HID reporting IN endpoint. */
+		#define KEYBOARD_IN_EPADDR        (ENDPOINT_DIR_IN  | 1)
+
+		/** Endpoint address of the Keyboard HID reporting OUT endpoint. */
+		#define KEYBOARD_OUT_EPADDR       (ENDPOINT_DIR_OUT | 2)
+
+		/** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */
+		#define KEYBOARD_EPSIZE           8
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Keyboard/Keyboard.c b/lib/lufa/Demos/Device/LowLevel/Keyboard/Keyboard.c
new file mode 100644
index 000000000..c412991e8
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Keyboard/Keyboard.c
@@ -0,0 +1,383 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the Keyboard demo. This file contains the main tasks of the demo and
+ *  is responsible for the initial application hardware configuration.
+ */
+
+#include "Keyboard.h"
+
+/** Indicates what report mode the host has requested, true for normal HID reporting mode, \c false for special boot
+ *  protocol reporting mode.
+ */
+static bool UsingReportProtocol = true;
+
+/** Current Idle period. This is set by the host via a Set Idle HID class request to silence the device's reports
+ *  for either the entire idle duration, or until the report status changes (e.g. the user presses a key).
+ */
+static uint16_t IdleCount = 500;
+
+/** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle
+ *  milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request
+ *  the current idle period via a Get Idle HID class request, thus its value must be preserved.
+ */
+static uint16_t IdleMSRemaining = 0;
+
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		HID_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	USB_Init();
+	Buttons_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Device_Connect(void)
+{
+	/* Indicate USB enumerating */
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+	/* Default to report protocol on connect */
+	UsingReportProtocol = true;
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Indicate USB not ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
+ *  of the USB device after enumeration, and configures the keyboard device endpoints.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup HID Report Endpoints */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPADDR, EP_TYPE_INTERRUPT, KEYBOARD_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPADDR, EP_TYPE_INTERRUPT, KEYBOARD_EPSIZE, 1);
+
+	/* Turn on Start-of-Frame events for tracking HID report period expiry */
+	USB_Device_EnableSOFEvents();
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	/* Handle HID Class specific requests */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case HID_REQ_GetReport:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				USB_KeyboardReport_Data_t KeyboardReportData;
+
+				/* Create the next keyboard report for transmission to the host */
+				CreateKeyboardReport(&KeyboardReportData);
+
+				Endpoint_ClearSETUP();
+
+				/* Write the report data to the control endpoint */
+				Endpoint_Write_Control_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData));
+				Endpoint_ClearOUT();
+			}
+
+			break;
+		case HID_REQ_SetReport:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Wait until the LED report has been sent by the host */
+				while (!(Endpoint_IsOUTReceived()))
+				{
+					if (USB_DeviceState == DEVICE_STATE_Unattached)
+					  return;
+				}
+
+				/* Read in the LED report from the host */
+				uint8_t LEDStatus = Endpoint_Read_8();
+
+				Endpoint_ClearOUT();
+				Endpoint_ClearStatusStage();
+
+				/* Process the incoming LED report */
+				ProcessLEDReport(LEDStatus);
+			}
+
+			break;
+		case HID_REQ_GetProtocol:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Write the current protocol flag to the host */
+				Endpoint_Write_8(UsingReportProtocol);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case HID_REQ_SetProtocol:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+				Endpoint_ClearStatusStage();
+
+				/* Set or clear the flag depending on what the host indicates that the current Protocol should be */
+				UsingReportProtocol = (USB_ControlRequest.wValue != 0);
+			}
+
+			break;
+		case HID_REQ_SetIdle:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+				Endpoint_ClearStatusStage();
+
+				/* Get idle period in MSB, IdleCount must be multiplied by 4 to get number of milliseconds */
+				IdleCount = ((USB_ControlRequest.wValue & 0xFF00) >> 6);
+			}
+
+			break;
+		case HID_REQ_GetIdle:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Write the current idle duration to the host, must be divided by 4 before sent to host */
+				Endpoint_Write_8(IdleCount >> 2);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+	}
+}
+
+/** Event handler for the USB device Start Of Frame event. */
+void EVENT_USB_Device_StartOfFrame(void)
+{
+	/* One millisecond has elapsed, decrement the idle time remaining counter if it has not already elapsed */
+	if (IdleMSRemaining)
+	  IdleMSRemaining--;
+}
+
+/** Fills the given HID report data structure with the next HID report to send to the host.
+ *
+ *  \param[out] ReportData  Pointer to a HID report data structure to be filled
+ */
+void CreateKeyboardReport(USB_KeyboardReport_Data_t* const ReportData)
+{
+	uint8_t JoyStatus_LCL     = Joystick_GetStatus();
+	uint8_t ButtonStatus_LCL  = Buttons_GetStatus();
+
+	uint8_t UsedKeyCodes      = 0;
+
+	/* Clear the report contents */
+	memset(ReportData, 0, sizeof(USB_KeyboardReport_Data_t));
+
+	/* Make sent key uppercase by indicating that the left shift key is pressed */
+	ReportData->Modifier = HID_KEYBOARD_MODIFIER_LEFTSHIFT;
+
+	if (JoyStatus_LCL & JOY_UP)
+	  ReportData->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_A;
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  ReportData->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_B;
+
+	if (JoyStatus_LCL & JOY_LEFT)
+	  ReportData->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_C;
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  ReportData->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_D;
+
+	if (JoyStatus_LCL & JOY_PRESS)
+	  ReportData->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_E;
+
+	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
+	  ReportData->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_F;
+}
+
+/** Processes a received LED report, and updates the board LEDs states to match.
+ *
+ *  \param[in] LEDReport  LED status report from the host
+ */
+void ProcessLEDReport(const uint8_t LEDReport)
+{
+	uint8_t LEDMask = LEDS_LED2;
+
+	if (LEDReport & HID_KEYBOARD_LED_NUMLOCK)
+	  LEDMask |= LEDS_LED1;
+
+	if (LEDReport & HID_KEYBOARD_LED_CAPSLOCK)
+	  LEDMask |= LEDS_LED3;
+
+	if (LEDReport & HID_KEYBOARD_LED_SCROLLLOCK)
+	  LEDMask |= LEDS_LED4;
+
+	/* Set the status LEDs to the current Keyboard LED status */
+	LEDs_SetAllLEDs(LEDMask);
+}
+
+/** Sends the next HID report to the host, via the keyboard data endpoint. */
+void SendNextReport(void)
+{
+	static USB_KeyboardReport_Data_t PrevKeyboardReportData;
+	USB_KeyboardReport_Data_t        KeyboardReportData;
+	bool                             SendReport = false;
+
+	/* Create the next keyboard report for transmission to the host */
+	CreateKeyboardReport(&KeyboardReportData);
+
+	/* Check if the idle period is set and has elapsed */
+	if (IdleCount && (!(IdleMSRemaining)))
+	{
+		/* Reset the idle time remaining counter */
+		IdleMSRemaining = IdleCount;
+
+		/* Idle period is set and has elapsed, must send a report to the host */
+		SendReport = true;
+	}
+	else
+	{
+		/* Check to see if the report data has changed - if so a report MUST be sent */
+		SendReport = (memcmp(&PrevKeyboardReportData, &KeyboardReportData, sizeof(USB_KeyboardReport_Data_t)) != 0);
+	}
+
+	/* Select the Keyboard Report Endpoint */
+	Endpoint_SelectEndpoint(KEYBOARD_IN_EPADDR);
+
+	/* Check if Keyboard Endpoint Ready for Read/Write and if we should send a new report */
+	if (Endpoint_IsReadWriteAllowed() && SendReport)
+	{
+		/* Save the current report data for later comparison to check for changes */
+		PrevKeyboardReportData = KeyboardReportData;
+
+		/* Write Keyboard Report Data */
+		Endpoint_Write_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData), NULL);
+
+		/* Finalize the stream transfer to send the last packet */
+		Endpoint_ClearIN();
+	}
+}
+
+/** Reads the next LED status report from the host from the LED data endpoint, if one has been sent. */
+void ReceiveNextReport(void)
+{
+	/* Select the Keyboard LED Report Endpoint */
+	Endpoint_SelectEndpoint(KEYBOARD_OUT_EPADDR);
+
+	/* Check if Keyboard LED Endpoint contains a packet */
+	if (Endpoint_IsOUTReceived())
+	{
+		/* Check to see if the packet contains data */
+		if (Endpoint_IsReadWriteAllowed())
+		{
+			/* Read in the LED report from the host */
+			uint8_t LEDReport = Endpoint_Read_8();
+
+			/* Process the read LED report from the host */
+			ProcessLEDReport(LEDReport);
+		}
+
+		/* Handshake the OUT Endpoint - clear endpoint and ready for next report */
+		Endpoint_ClearOUT();
+	}
+}
+
+/** Function to manage HID report generation and transmission to the host, when in report mode. */
+void HID_Task(void)
+{
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	/* Send the next keypress report to the host */
+	SendNextReport();
+
+	/* Process the LED report sent from the host */
+	ReceiveNextReport();
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Keyboard/Keyboard.h b/lib/lufa/Demos/Device/LowLevel/Keyboard/Keyboard.h
new file mode 100644
index 000000000..5c6bad371
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Keyboard/Keyboard.h
@@ -0,0 +1,85 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Keyboard.c.
+ */
+
+#ifndef _KEYBOARD_H_
+#define _KEYBOARD_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdbool.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY        LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING     (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY           (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR           (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void HID_Task(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+		void EVENT_USB_Device_StartOfFrame(void);
+
+		void CreateKeyboardReport(USB_KeyboardReport_Data_t* const ReportData);
+		void ProcessLEDReport(const uint8_t LEDReport);
+		void SendNextReport(void);
+		void ReceiveNextReport(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Keyboard/Keyboard.txt b/lib/lufa/Demos/Device/LowLevel/Keyboard/Keyboard.txt
new file mode 100644
index 000000000..e945dccfe
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Keyboard/Keyboard.txt
@@ -0,0 +1,76 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Keyboard Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Human Interface Device (HID)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>N/A</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Low Speed Mode \n
+ *        Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Keyboard demonstration application. This gives a simple reference application
+ *  for implementing a USB Keyboard using the basic USB HID drivers in all modern
+ *  OSes (i.e. no special drivers required). It is boot protocol compatible, and thus
+ *  works under compatible BIOS as if it was a native keyboard (e.g. PS/2).
+ *
+ *  On start-up the system will automatically enumerate and function as a keyboard
+ *  when the USB connection to a host is present. To use the keyboard example,
+ *  manipulate the joystick to send the letters a, b, c, d and e. See the USB HID
+ *  documentation for more information on sending keyboard event and key presses. Unlike
+ *  other LUFA Keyboard demos, this example shows explicitly how to send multiple key presses
+ *  inside the same report to the host.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Keyboard/asf.xml b/lib/lufa/Demos/Device/LowLevel/Keyboard/asf.xml
new file mode 100644
index 000000000..4d386f46f
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Keyboard/asf.xml
@@ -0,0 +1,62 @@
+<asf xmlversion="1.0">

+	<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.avr8">

+		<require idref="lufa.demos.device.lowlevel.keyboard"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.xmega">

+		<require idref="lufa.demos.device.lowlevel.keyboard"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.lowlevel.keyboard" caption="Keyboard HID Device Demo (Low Level APIs)">

+		<info type="description" value="summary">

+		Keyboard HID device demo, implementing a basic USB keyboard that can send key press information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Low Level APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="HID Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="Keyboard.txt"/>

+

+		<build type="c-source" value="Keyboard.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="Keyboard.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.joystick"/>

+		<require idref="lufa.drivers.board.buttons"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/LowLevel/Keyboard/doxyfile b/lib/lufa/Demos/Device/LowLevel/Keyboard/doxyfile
new file mode 100644
index 000000000..e39731937
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Keyboard/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Keyboard Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/LowLevel/Keyboard/makefile b/lib/lufa/Demos/Device/LowLevel/Keyboard/makefile
new file mode 100644
index 000000000..dd53f3fa0
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Keyboard/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = Keyboard
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/Config/LUFAConfig.h b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/Config/LUFAConfig.h
new file mode 100644
index 000000000..cc828a108
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               3
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c
new file mode 100644
index 000000000..7efc6d2ee
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c
@@ -0,0 +1,346 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** HID class report descriptor. This is a special descriptor constructed with values from the
+ *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
+ *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
+ *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
+ *  more details on HID report descriptors.
+ *
+ *  This descriptor describes the mouse HID interface's report structure.
+ */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
+{
+	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+	HID_RI_USAGE(8, 0x02), /* Mouse */
+	HID_RI_COLLECTION(8, 0x01), /* Application */
+		HID_RI_USAGE(8, 0x01), /* Pointer */
+		HID_RI_COLLECTION(8, 0x00), /* Physical */
+			HID_RI_USAGE_PAGE(8, 0x09), /* Button */
+			HID_RI_USAGE_MINIMUM(8, 0x01),
+			HID_RI_USAGE_MAXIMUM(8, 0x03),
+			HID_RI_LOGICAL_MINIMUM(8, 0x00),
+			HID_RI_LOGICAL_MAXIMUM(8, 0x01),
+			HID_RI_REPORT_COUNT(8, 0x03),
+			HID_RI_REPORT_SIZE(8, 0x01),
+			HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+			HID_RI_REPORT_COUNT(8, 0x01),
+			HID_RI_REPORT_SIZE(8, 0x05),
+			HID_RI_INPUT(8, HID_IOF_CONSTANT),
+			HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+			HID_RI_USAGE(8, 0x30), /* Usage X */
+			HID_RI_USAGE(8, 0x31), /* Usage Y */
+			HID_RI_LOGICAL_MINIMUM(8, -1),
+			HID_RI_LOGICAL_MAXIMUM(8, 1),
+			HID_RI_PHYSICAL_MINIMUM(8, -1),
+			HID_RI_PHYSICAL_MAXIMUM(8, 1),
+			HID_RI_REPORT_COUNT(8, 0x02),
+			HID_RI_REPORT_SIZE(8, 0x08),
+			HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
+		HID_RI_END_COLLECTION(0),
+	HID_RI_END_COLLECTION(0),
+};
+
+/** Same as the MouseReport structure, but defines the keyboard HID interface's report structure. */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
+{
+	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+	HID_RI_USAGE(8, 0x06), /* Keyboard */
+	HID_RI_COLLECTION(8, 0x01), /* Application */
+		HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */
+		HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */
+		HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */
+		HID_RI_LOGICAL_MINIMUM(8, 0x00),
+		HID_RI_LOGICAL_MAXIMUM(8, 0x01),
+		HID_RI_REPORT_SIZE(8, 0x01),
+		HID_RI_REPORT_COUNT(8, 0x08),
+		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+		HID_RI_REPORT_COUNT(8, 0x01),
+		HID_RI_REPORT_SIZE(8, 0x08),
+		HID_RI_INPUT(8, HID_IOF_CONSTANT),
+		HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */
+		HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */
+		HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */
+		HID_RI_REPORT_COUNT(8, 0x05),
+		HID_RI_REPORT_SIZE(8, 0x01),
+		HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
+		HID_RI_REPORT_COUNT(8, 0x01),
+		HID_RI_REPORT_SIZE(8, 0x03),
+		HID_RI_OUTPUT(8, HID_IOF_CONSTANT),
+		HID_RI_LOGICAL_MINIMUM(8, 0x00),
+		HID_RI_LOGICAL_MAXIMUM(8, 0x65),
+		HID_RI_USAGE_PAGE(8, 0x07), /* Keyboard */
+		HID_RI_USAGE_MINIMUM(8, 0x00), /* Reserved (no event indicated) */
+		HID_RI_USAGE_MAXIMUM(8, 0x65), /* Keyboard Application */
+		HID_RI_REPORT_COUNT(8, 0x06),
+		HID_RI_REPORT_SIZE(8, 0x08),
+		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
+	HID_RI_END_COLLECTION(0),
+};
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x204D,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 2,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.HID1_KeyboardInterface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_Keyboard,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_BootSubclass,
+			.Protocol               = HID_CSCP_KeyboardBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID1_KeyboardHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(KeyboardReport)
+		},
+
+	.HID1_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = KEYBOARD_IN_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = HID_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.HID1_ReportOUTEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = KEYBOARD_OUT_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = HID_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.HID2_MouseInterface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_Mouse,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_BootSubclass,
+			.Protocol               = HID_CSCP_MouseBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID2_MouseHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(MouseReport)
+		},
+
+	.HID2_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = MOUSE_IN_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = HID_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mouse and Keyboard Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+		case HID_DTYPE_HID:
+			switch (wIndex)
+			{
+				case (INTERFACE_ID_Keyboard):
+					Address = &ConfigurationDescriptor.HID1_KeyboardHID;
+					Size    = sizeof(USB_HID_Descriptor_HID_t);
+					break;
+				case (INTERFACE_ID_Mouse):
+					Address = &ConfigurationDescriptor.HID2_MouseHID;
+					Size    = sizeof(USB_HID_Descriptor_HID_t);
+					break;
+			}
+			break;
+		case HID_DTYPE_Report:
+			switch (wIndex)
+			{
+				case INTERFACE_ID_Keyboard:
+					Address = &KeyboardReport;
+					Size    = sizeof(KeyboardReport);
+					break;
+				case INTERFACE_ID_Mouse:
+					Address = &MouseReport;
+					Size    = sizeof(MouseReport);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h
new file mode 100644
index 000000000..f59ac97ec
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h
@@ -0,0 +1,107 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Keyboard HID Interface
+			USB_Descriptor_Interface_t            HID1_KeyboardInterface;
+			USB_HID_Descriptor_HID_t              HID1_KeyboardHID;
+			USB_Descriptor_Endpoint_t             HID1_ReportINEndpoint;
+			USB_Descriptor_Endpoint_t             HID1_ReportOUTEndpoint;
+
+			// Mouse HID Interface
+			USB_Descriptor_Interface_t            HID2_MouseInterface;
+			USB_HID_Descriptor_HID_t              HID2_MouseHID;
+			USB_Descriptor_Endpoint_t             HID2_ReportINEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_Keyboard = 0, /**< Keyboard interface descriptor ID */
+			INTERFACE_ID_Mouse    = 1, /**< Mouse interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Macros: */
+		/** Endpoint address of the Keyboard HID reporting IN endpoint. */
+		#define KEYBOARD_IN_EPADDR        (ENDPOINT_DIR_IN  | 1)
+
+		/** Endpoint address of the Keyboard HID reporting OUT endpoint. */
+		#define KEYBOARD_OUT_EPADDR       (ENDPOINT_DIR_OUT | 2)
+
+		/** Endpoint address of the Mouse HID reporting IN endpoint. */
+		#define MOUSE_IN_EPADDR           (ENDPOINT_DIR_IN  | 3)
+
+		/** Size in bytes of each of the HID reporting IN and OUT endpoints. */
+		#define HID_EPSIZE                8
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c
new file mode 100644
index 000000000..0f2719ce7
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c
@@ -0,0 +1,321 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the KeyboardMouse demo. This file contains the main tasks of the demo and
+ *  is responsible for the initial application hardware configuration.
+ */
+
+#include "KeyboardMouse.h"
+
+/** Global structure to hold the current keyboard interface HID report, for transmission to the host */
+static USB_KeyboardReport_Data_t KeyboardReportData;
+
+/** Global structure to hold the current mouse interface HID report, for transmission to the host */
+static USB_MouseReport_Data_t MouseReportData;
+
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		Keyboard_HID_Task();
+		Mouse_HID_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Device_Connect(void)
+{
+	/* Indicate USB enumerating */
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs and stops the USB management task.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Indicate USB not ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
+ *  of the USB device after enumeration, and configures the keyboard and mouse device endpoints.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup Keyboard HID Report Endpoints */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPADDR, EP_TYPE_INTERRUPT, HID_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPADDR, EP_TYPE_INTERRUPT, HID_EPSIZE, 1);
+
+	/* Setup Mouse HID Report Endpoint */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_IN_EPADDR, EP_TYPE_INTERRUPT, HID_EPSIZE, 1);
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	uint8_t* ReportData;
+	uint8_t  ReportSize;
+
+	/* Handle HID Class specific requests */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case HID_REQ_GetReport:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Determine if it is the mouse or the keyboard data that is being requested */
+				if (!(USB_ControlRequest.wIndex))
+				{
+					ReportData = (uint8_t*)&KeyboardReportData;
+					ReportSize = sizeof(KeyboardReportData);
+				}
+				else
+				{
+					ReportData = (uint8_t*)&MouseReportData;
+					ReportSize = sizeof(MouseReportData);
+				}
+
+				/* Write the report data to the control endpoint */
+				Endpoint_Write_Control_Stream_LE(ReportData, ReportSize);
+				Endpoint_ClearOUT();
+
+				/* Clear the report data afterwards */
+				memset(ReportData, 0, ReportSize);
+			}
+
+			break;
+		case HID_REQ_SetReport:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Wait until the LED report has been sent by the host */
+				while (!(Endpoint_IsOUTReceived()))
+				{
+					if (USB_DeviceState == DEVICE_STATE_Unattached)
+					  return;
+				}
+
+				/* Read in the LED report from the host */
+				uint8_t LEDStatus = Endpoint_Read_8();
+
+				Endpoint_ClearOUT();
+				Endpoint_ClearStatusStage();
+
+				/* Process the incoming LED report */
+				Keyboard_ProcessLEDReport(LEDStatus);
+			}
+
+			break;
+	}
+}
+
+/** Processes a given Keyboard LED report from the host, and sets the board LEDs to match. Since the Keyboard
+ *  LED report can be sent through either the control endpoint (via a HID SetReport request) or the HID OUT
+ *  endpoint, the processing code is placed here to avoid duplicating it and potentially having different
+ *  behavior depending on the method used to sent it.
+ */
+void Keyboard_ProcessLEDReport(const uint8_t LEDStatus)
+{
+	uint8_t LEDMask = LEDS_LED2;
+
+	if (LEDStatus & HID_KEYBOARD_LED_NUMLOCK)
+	  LEDMask |= LEDS_LED1;
+
+	if (LEDStatus & HID_KEYBOARD_LED_CAPSLOCK)
+	  LEDMask |= LEDS_LED3;
+
+	if (LEDStatus & HID_KEYBOARD_LED_SCROLLLOCK)
+	  LEDMask |= LEDS_LED4;
+
+	/* Set the status LEDs to the current Keyboard LED status */
+	LEDs_SetAllLEDs(LEDMask);
+}
+
+/** Keyboard task. This generates the next keyboard HID report for the host, and transmits it via the
+ *  keyboard IN endpoint when the host is ready for more data. Additionally, it processes host LED status
+ *  reports sent to the device via the keyboard OUT reporting endpoint.
+ */
+void Keyboard_HID_Task(void)
+{
+	uint8_t JoyStatus_LCL = Joystick_GetStatus();
+
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	/* Check if board button is not pressed, if so mouse mode enabled */
+	if (!(Buttons_GetStatus() & BUTTONS_BUTTON1))
+	{
+		/* Make sent key uppercase by indicating that the left shift key is pressed */
+		KeyboardReportData.Modifier = HID_KEYBOARD_MODIFIER_LEFTSHIFT;
+
+		if (JoyStatus_LCL & JOY_UP)
+		  KeyboardReportData.KeyCode[0] = HID_KEYBOARD_SC_A;
+		else if (JoyStatus_LCL & JOY_DOWN)
+		  KeyboardReportData.KeyCode[0] = HID_KEYBOARD_SC_B;
+
+		if (JoyStatus_LCL & JOY_LEFT)
+		  KeyboardReportData.KeyCode[0] = HID_KEYBOARD_SC_C;
+		else if (JoyStatus_LCL & JOY_RIGHT)
+		  KeyboardReportData.KeyCode[0] = HID_KEYBOARD_SC_D;
+
+		if (JoyStatus_LCL & JOY_PRESS)
+		  KeyboardReportData.KeyCode[0] = HID_KEYBOARD_SC_E;
+	}
+
+	/* Select the Keyboard Report Endpoint */
+	Endpoint_SelectEndpoint(KEYBOARD_IN_EPADDR);
+
+	/* Check if Keyboard Endpoint Ready for Read/Write */
+	if (Endpoint_IsReadWriteAllowed())
+	{
+		/* Write Keyboard Report Data */
+		Endpoint_Write_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData), NULL);
+
+		/* Finalize the stream transfer to send the last packet */
+		Endpoint_ClearIN();
+
+		/* Clear the report data afterwards */
+		memset(&KeyboardReportData, 0, sizeof(KeyboardReportData));
+	}
+
+	/* Select the Keyboard LED Report Endpoint */
+	Endpoint_SelectEndpoint(KEYBOARD_OUT_EPADDR);
+
+	/* Check if Keyboard LED Endpoint Ready for Read/Write */
+	if (Endpoint_IsReadWriteAllowed())
+	{
+		/* Read in and process the LED report from the host */
+		Keyboard_ProcessLEDReport(Endpoint_Read_8());
+
+		/* Handshake the OUT Endpoint - clear endpoint and ready for next report */
+		Endpoint_ClearOUT();
+	}
+}
+
+/** Mouse task. This generates the next mouse HID report for the host, and transmits it via the
+ *  mouse IN endpoint when the host is ready for more data.
+ */
+void Mouse_HID_Task(void)
+{
+	uint8_t JoyStatus_LCL = Joystick_GetStatus();
+
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	/* Check if board button is pressed, if so mouse mode enabled */
+	if (Buttons_GetStatus() & BUTTONS_BUTTON1)
+	{
+		if (JoyStatus_LCL & JOY_UP)
+		  MouseReportData.Y =  1;
+		else if (JoyStatus_LCL & JOY_DOWN)
+		  MouseReportData.Y = -1;
+
+		if (JoyStatus_LCL & JOY_RIGHT)
+		  MouseReportData.X =  1;
+		else if (JoyStatus_LCL & JOY_LEFT)
+		  MouseReportData.X = -1;
+
+		if (JoyStatus_LCL & JOY_PRESS)
+		  MouseReportData.Button |= (1 << 0);
+	}
+
+	/* Select the Mouse Report Endpoint */
+	Endpoint_SelectEndpoint(MOUSE_IN_EPADDR);
+
+	/* Check if Mouse Endpoint Ready for Read/Write */
+	if (Endpoint_IsReadWriteAllowed())
+	{
+		/* Write Mouse Report Data */
+		Endpoint_Write_Stream_LE(&MouseReportData, sizeof(MouseReportData), NULL);
+
+		/* Finalize the stream transfer to send the last packet */
+		Endpoint_ClearIN();
+
+		/* Clear the report data afterwards */
+		memset(&MouseReportData, 0, sizeof(MouseReportData));
+	}
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h
new file mode 100644
index 000000000..4bcb33c06
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h
@@ -0,0 +1,77 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+#ifndef _KEYBOARD_MOUSE_H_
+#define _KEYBOARD_MOUSE_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdbool.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY        LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING     (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY           (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR           (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void Keyboard_ProcessLEDReport(const uint8_t LEDStatus);
+		void Keyboard_HID_Task(void);
+		void Mouse_HID_Task(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+		void EVENT_USB_Device_StartOfFrame(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt
new file mode 100644
index 000000000..262a84f0e
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt
@@ -0,0 +1,81 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Dual HID Keyboard and Mouse Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Human Interface Device (HID)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>N/A</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Low Speed Mode \n
+ *        Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Keyboard/Mouse demonstration application. This gives a simple reference
+ *  application for implementing a composite device containing both USB Keyboard
+ *  and USB Mouse functionality using the basic USB HID drivers in all modern OSes
+ *  (i.e. no special drivers required). This example uses two separate HID
+ *  interfaces for each function. It is boot protocol compatible, and thus works under
+ *  compatible BIOS as if it was a native keyboard and mouse (e.g. PS/2).
+ *
+ *  On start-up the system will automatically enumerate and function
+ *  as a keyboard when the USB connection to a host is present and the HWB is not
+ *  pressed. When enabled, manipulate the joystick to send the letters
+ *  a, b, c, d and e. See the USB HID documentation for more information
+ *  on sending keyboard event and key presses.
+ *
+ *  When the HWB is pressed, the mouse mode is enabled. When enabled, move the
+ *  joystick to move the pointer, and push the joystick inwards to simulate a
+ *  left-button click.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/asf.xml b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/asf.xml
new file mode 100644
index 000000000..d44bb8043
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/asf.xml
@@ -0,0 +1,62 @@
+<asf xmlversion="1.0">

+	<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.avr8">

+		<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.xmega">

+		<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.lowlevel.keyboard_mouse" caption="Keyboard and Mouse HID Device Demo (Low Level APIs)">

+		<info type="description" value="summary">

+		Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a pair of HID interfaces. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Low Level APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="HID Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="KeyboardMouse.txt"/>

+

+		<build type="c-source" value="KeyboardMouse.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="KeyboardMouse.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.joystick"/>

+		<require idref="lufa.drivers.board.buttons"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/doxyfile b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/doxyfile
new file mode 100644
index 000000000..6648a78d1
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Combined Keyboard/Mouse Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/makefile b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/makefile
new file mode 100644
index 000000000..cff064f9a
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/KeyboardMouse/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = KeyboardMouse
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/LowLevel/MIDI/Config/LUFAConfig.h b/lib/lufa/Demos/Device/LowLevel/MIDI/Config/LUFAConfig.h
new file mode 100644
index 000000000..00eefc7bf
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MIDI/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               2
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/MIDI/Descriptors.c b/lib/lufa/Demos/Device/LowLevel/MIDI/Descriptors.c
new file mode 100644
index 000000000..b4bcea1ee
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MIDI/Descriptors.c
@@ -0,0 +1,314 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2048,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces          = 2,
+
+			.ConfigurationNumber      = 1,
+			.ConfigurationStrIndex    = NO_DESCRIPTOR,
+
+			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
+		},
+
+	.Audio_ControlInterface =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioControl,
+			.AlternateSetting         = 0,
+
+			.TotalEndpoints           = 0,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_ControlSubclass,
+			.Protocol                 = AUDIO_CSCP_ControlProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_ControlInterface_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
+
+			.ACSpecification          = VERSION_BCD(1,0,0),
+			.TotalLength              = sizeof(USB_Audio_Descriptor_Interface_AC_t),
+
+			.InCollection             = 1,
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+		},
+
+	.Audio_StreamInterface =
+		{
+			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber          = INTERFACE_ID_AudioStream,
+			.AlternateSetting         = 0,
+
+			.TotalEndpoints           = 2,
+
+			.Class                    = AUDIO_CSCP_AudioClass,
+			.SubClass                 = AUDIO_CSCP_MIDIStreamingSubclass,
+			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
+
+			.InterfaceStrIndex        = NO_DESCRIPTOR
+		},
+
+	.Audio_StreamInterface_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_AudioInterface_AS_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
+
+			.AudioSpecification       = VERSION_BCD(1,0,0),
+
+			.TotalLength              = (sizeof(USB_Descriptor_Configuration_t) -
+			                             offsetof(USB_Descriptor_Configuration_t, Audio_StreamInterface_SPC))
+		},
+
+	.MIDI_In_Jack_Emb =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_Embedded,
+			.JackID                   = 0x01,
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_In_Jack_Ext =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_External,
+			.JackID                   = 0x02,
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_Out_Jack_Emb =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_Embedded,
+			.JackID                   = 0x03,
+
+			.NumberOfPins             = 1,
+			.SourceJackID             = {0x02},
+			.SourcePinID              = {0x01},
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_Out_Jack_Ext =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
+			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
+
+			.JackType                 = MIDI_JACKTYPE_External,
+			.JackID                   = 0x04,
+
+			.NumberOfPins             = 1,
+			.SourceJackID             = {0x01},
+			.SourcePinID              = {0x01},
+
+			.JackStrIndex             = NO_DESCRIPTOR
+		},
+
+	.MIDI_In_Jack_Endpoint =
+		{
+			.Endpoint =
+				{
+					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
+
+					.EndpointAddress     = MIDI_STREAM_OUT_EPADDR,
+					.Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+					.EndpointSize        = MIDI_STREAM_EPSIZE,
+					.PollingIntervalMS   = 0x05
+				},
+
+			.Refresh                  = 0,
+			.SyncEndpointNumber       = 0
+		},
+
+	.MIDI_In_Jack_Endpoint_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint},
+			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
+
+			.TotalEmbeddedJacks       = 0x01,
+			.AssociatedJackID         = {0x01}
+		},
+
+	.MIDI_Out_Jack_Endpoint =
+		{
+			.Endpoint =
+				{
+					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
+
+					.EndpointAddress     = MIDI_STREAM_IN_EPADDR,
+					.Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+					.EndpointSize        = MIDI_STREAM_EPSIZE,
+					.PollingIntervalMS   = 0x05
+				},
+
+			.Refresh                  = 0,
+			.SyncEndpointNumber       = 0
+		},
+
+	.MIDI_Out_Jack_Endpoint_SPC =
+		{
+			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint},
+			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
+
+			.TotalEmbeddedJacks       = 0x01,
+			.AssociatedJackID         = {0x03}
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA MIDI Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/MIDI/Descriptors.h b/lib/lufa/Demos/Device/LowLevel/MIDI/Descriptors.h
new file mode 100644
index 000000000..a477d9dc8
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MIDI/Descriptors.h
@@ -0,0 +1,108 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+	/* Macros: */
+		/** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */
+		#define MIDI_STREAM_IN_EPADDR       (ENDPOINT_DIR_IN  | 1)
+
+		/** Endpoint address of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */
+		#define MIDI_STREAM_OUT_EPADDR      (ENDPOINT_DIR_OUT | 2)
+
+		/** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */
+		#define MIDI_STREAM_EPSIZE          64
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t     Config;
+
+			// MIDI Audio Control Interface
+			USB_Descriptor_Interface_t                Audio_ControlInterface;
+			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
+
+			// MIDI Audio Streaming Interface
+			USB_Descriptor_Interface_t                Audio_StreamInterface;
+			USB_MIDI_Descriptor_AudioInterface_AS_t   Audio_StreamInterface_SPC;
+			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Emb;
+			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Ext;
+			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Emb;
+			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Ext;
+			USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_In_Jack_Endpoint;
+			USB_MIDI_Descriptor_Jack_Endpoint_t       MIDI_In_Jack_Endpoint_SPC;
+			USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_Out_Jack_Endpoint;
+			USB_MIDI_Descriptor_Jack_Endpoint_t       MIDI_Out_Jack_Endpoint_SPC;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
+			INTERFACE_ID_AudioStream  = 1, /**< Audio stream interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.c b/lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.c
new file mode 100644
index 000000000..0fdb04597
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.c
@@ -0,0 +1,224 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the MIDI input demo. This file contains the main tasks of the demo and
+ *  is responsible for the initial application hardware configuration.
+ */
+
+#include "MIDI.h"
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		MIDI_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	Buttons_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
+void EVENT_USB_Device_Connect(void)
+{
+	/* Indicate USB enumerating */
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs, disables the sample update and PWM output timers and stops the USB and MIDI management tasks.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Indicate USB not ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
+ *  of the USB device after enumeration - the device endpoints are configured and the MIDI management task started.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup MIDI Data Endpoints */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_IN_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, 1);
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Task to handle the generation of MIDI note change events in response to presses of the board joystick, and send them
+ *  to the host.
+ */
+void MIDI_Task(void)
+{
+	static uint8_t PrevJoystickStatus;
+
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPADDR);
+
+	if (Endpoint_IsINReady())
+	{
+		uint8_t MIDICommand = 0;
+		uint8_t MIDIPitch;
+
+		uint8_t JoystickStatus  = Joystick_GetStatus();
+		uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);
+
+		/* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */
+		uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1));
+
+		if (JoystickChanges & JOY_LEFT)
+		{
+			MIDICommand = ((JoystickStatus & JOY_LEFT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+			MIDIPitch   = 0x3C;
+		}
+
+		if (JoystickChanges & JOY_UP)
+		{
+			MIDICommand = ((JoystickStatus & JOY_UP)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+			MIDIPitch   = 0x3D;
+		}
+
+		if (JoystickChanges & JOY_RIGHT)
+		{
+			MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+			MIDIPitch   = 0x3E;
+		}
+
+		if (JoystickChanges & JOY_DOWN)
+		{
+			MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+			MIDIPitch   = 0x3F;
+		}
+
+		if (JoystickChanges & JOY_PRESS)
+		{
+			MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+			MIDIPitch   = 0x3B;
+		}
+
+		/* Check if a MIDI command is to be sent */
+		if (MIDICommand)
+		{
+			MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
+				{
+					.Event       = MIDI_EVENT(0, MIDICommand),
+
+					.Data1       = MIDICommand | Channel,
+					.Data2       = MIDIPitch,
+					.Data3       = MIDI_STANDARD_VELOCITY,
+				};
+
+			/* Write the MIDI event packet to the endpoint */
+			Endpoint_Write_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
+
+			/* Send the data in the endpoint to the host */
+			Endpoint_ClearIN();
+		}
+
+		/* Save previous joystick value for next joystick change detection */
+		PrevJoystickStatus = JoystickStatus;
+	}
+
+	/* Select the MIDI OUT stream */
+	Endpoint_SelectEndpoint(MIDI_STREAM_OUT_EPADDR);
+
+	/* Check if a MIDI command has been received */
+	if (Endpoint_IsOUTReceived())
+	{
+		MIDI_EventPacket_t MIDIEvent;
+
+		/* Read the MIDI event packet from the endpoint */
+		Endpoint_Read_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
+
+		/* Check to see if the sent command is a note on message with a non-zero velocity */
+		if ((MIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)) && (MIDIEvent.Data3 > 0))
+		{
+			/* Change LEDs depending on the pitch of the sent note */
+			LEDs_SetAllLEDs(MIDIEvent.Data2 > 64 ? LEDS_LED1 : LEDS_LED2);
+		}
+		else
+		{
+			/* Turn off all LEDs in response to non Note On messages */
+			LEDs_SetAllLEDs(LEDS_NO_LEDS);
+		}
+
+		/* If the endpoint is now empty, clear the bank */
+		if (!(Endpoint_BytesInEndpoint()))
+		{
+			/* Clear the endpoint ready for new packet */
+			Endpoint_ClearOUT();
+		}
+	}
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.h b/lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.h
new file mode 100644
index 000000000..55ba499b5
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.h
@@ -0,0 +1,76 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for AudioOutput.c.
+ */
+
+#ifndef _AUDIO_OUTPUT_H_
+#define _AUDIO_OUTPUT_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdbool.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Platform/Platform.h>
+
+   /* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+   /* Function Prototypes: */
+		void SetupHardware(void);
+		void MIDI_Task(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.txt b/lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.txt
new file mode 100644
index 000000000..97a92a190
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.txt
@@ -0,0 +1,78 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage MIDI Input Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Audio Class</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Standard Audio Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Audio Class Specification \n
+ *        USB-MIDI Audio Class Extension Specification \n
+ *        General MIDI Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  MIDI demonstration application. This gives a simple reference
+ *  application for implementing the USB-MIDI class in USB devices.
+ *  It is built upon the USB Audio class.
+ *
+ *  Joystick movements are translated into note on/off messages and
+ *  are sent to the host PC as MIDI streams which can be read by any
+ *  MIDI program supporting MIDI IN devices.
+ *
+ *  If the HWB is not pressed, channel 1 (default piano) is used. If
+ *  the HWB is pressed, then channel 10 (default percussion) is selected.
+ *
+ *  This device implements MIDI-THRU mode, with the IN MIDI data being
+ *  generated by the device itself. OUT MIDI data is discarded.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/LowLevel/MIDI/asf.xml b/lib/lufa/Demos/Device/LowLevel/MIDI/asf.xml
new file mode 100644
index 000000000..477b7d749
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MIDI/asf.xml
@@ -0,0 +1,62 @@
+<asf xmlversion="1.0">

+	<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.avr8">

+		<require idref="lufa.demos.device.lowlevel.midi"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.xmega">

+		<require idref="lufa.demos.device.lowlevel.midi"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.lowlevel.midi" caption="MIDI Device Demo (Low Level APIs)">

+		<info type="description" value="summary">

+		MIDI device demo, implementing a basic USB MIDI device that can send messages to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Low Level APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="MIDI Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="MIDI.txt"/>

+

+		<build type="c-source" value="MIDI.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="MIDI.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.buttons"/>

+		<require idref="lufa.drivers.board.joystick"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/LowLevel/MIDI/doxyfile b/lib/lufa/Demos/Device/LowLevel/MIDI/doxyfile
new file mode 100644
index 000000000..e7bfea0c0
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MIDI/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - MIDI Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/LowLevel/MIDI/makefile b/lib/lufa/Demos/Device/LowLevel/MIDI/makefile
new file mode 100644
index 000000000..5f98afa2a
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MIDI/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = MIDI
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/LowLevel/MassStorage/Config/AppConfig.h b/lib/lufa/Demos/Device/LowLevel/MassStorage/Config/AppConfig.h
new file mode 100644
index 000000000..b18b2c414
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MassStorage/Config/AppConfig.h
@@ -0,0 +1,50 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define TOTAL_LUNS                1
+
+	#define DISK_READ_ONLY            false
+
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h b/lib/lufa/Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h
new file mode 100644
index 000000000..0ec4635eb
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               4
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/MassStorage/Descriptors.c b/lib/lufa/Demos/Device/LowLevel/MassStorage/Descriptors.c
new file mode 100644
index 000000000..115a7482c
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MassStorage/Descriptors.c
@@ -0,0 +1,194 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2045,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = USB_CONFIG_ATTR_RESERVED,
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.MS_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_MassStorage,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = MS_CSCP_MassStorageClass,
+			.SubClass               = MS_CSCP_SCSITransparentSubclass,
+			.Protocol               = MS_CSCP_BulkOnlyTransportProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.MS_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = MASS_STORAGE_IN_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.MS_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = MASS_STORAGE_OUT_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mass Storage Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/MassStorage/Descriptors.h b/lib/lufa/Demos/Device/LowLevel/MassStorage/Descriptors.h
new file mode 100644
index 000000000..c8614c942
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MassStorage/Descriptors.h
@@ -0,0 +1,98 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
+		#define MASS_STORAGE_IN_EPADDR         (ENDPOINT_DIR_IN  | 3)
+
+		/** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */
+		#define MASS_STORAGE_OUT_EPADDR        (ENDPOINT_DIR_OUT | 4)
+
+		/** Size in bytes of the Mass Storage data endpoints. */
+		#define MASS_STORAGE_IO_EPSIZE         64
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Mass Storage Interface
+			USB_Descriptor_Interface_t            MS_Interface;
+			USB_Descriptor_Endpoint_t             MS_DataInEndpoint;
+			USB_Descriptor_Endpoint_t             MS_DataOutEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_MassStorage = 0, /**< Mass storage interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c b/lib/lufa/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c
new file mode 100644
index 000000000..ebd1b39c3
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c
@@ -0,0 +1,530 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Functions to manage the physical Dataflash media, including reading and writing of
+ *  blocks of data. These functions are called by the SCSI layer when data must be stored
+ *  or retrieved to/from the physical storage media. If a different media is used (such
+ *  as a SD card or EEPROM), functions similar to these will need to be generated.
+ */
+
+#define  INCLUDE_FROM_DATAFLASHMANAGER_C
+#include "DataflashManager.h"
+
+/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
+ *  the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes
+ *  them to the Dataflash in Dataflash page sized blocks.
+ *
+ *  \param[in] BlockAddress  Data block starting address for the write sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to write
+ */
+void DataflashManager_WriteBlocks(const uint32_t BlockAddress,
+                                  uint16_t TotalBlocks)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+	bool     UsingSecondBuffer   = false;
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+	/* Copy selected dataflash's current page contents to the Dataflash buffer */
+	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
+	Dataflash_SendAddressBytes(CurrDFPage, 0);
+	Dataflash_WaitWhileBusy();
+#endif
+
+	/* Send the Dataflash buffer write command */
+	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
+	Dataflash_SendAddressBytes(0, CurrDFPageByte);
+
+	/* Wait until endpoint is ready before continuing */
+	if (Endpoint_WaitUntilReady())
+	  return;
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Write an endpoint packet sized data block to the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if the endpoint is currently empty */
+			if (!(Endpoint_IsReadWriteAllowed()))
+			{
+				/* Clear the current endpoint bank */
+				Endpoint_ClearOUT();
+
+				/* Wait until the host has sent another packet */
+				if (Endpoint_WaitUntilReady())
+				  return;
+			}
+
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Write the Dataflash buffer contents back to the Dataflash page */
+				Dataflash_WaitWhileBusy();
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
+				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
+				  UsingSecondBuffer = !(UsingSecondBuffer);
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
+				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
+				{
+					/* Copy selected dataflash's current page contents to the Dataflash buffer */
+					Dataflash_WaitWhileBusy();
+					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
+					Dataflash_SendAddressBytes(CurrDFPage, 0);
+					Dataflash_WaitWhileBusy();
+				}
+#endif
+
+				/* Send the Dataflash buffer write command */
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
+				Dataflash_SendAddressBytes(0, 0);
+			}
+
+			/* Write one 16-byte chunk of data to the Dataflash */
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+			Dataflash_SendByte(Endpoint_Read_8());
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+
+			/* Check if the current command is being aborted by the host */
+			if (IsMassStoreReset)
+			  return;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* Write the Dataflash buffer contents back to the Dataflash page */
+	Dataflash_WaitWhileBusy();
+	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
+	Dataflash_WaitWhileBusy();
+
+	/* If the endpoint is empty, clear it ready for the next packet from the host */
+	if (!(Endpoint_IsReadWriteAllowed()))
+	  Endpoint_ClearOUT();
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
+ *  the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash
+ *  and writes them in OS sized blocks to the endpoint.
+ *
+ *  \param[in] BlockAddress  Data block starting address for the read sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to read
+ */
+void DataflashManager_ReadBlocks(const uint32_t BlockAddress,
+                                 uint16_t TotalBlocks)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+	/* Send the Dataflash main memory page read command */
+	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+
+	/* Wait until endpoint is ready before continuing */
+	if (Endpoint_WaitUntilReady())
+	  return;
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Read an endpoint packet sized data block from the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if the endpoint is currently full */
+			if (!(Endpoint_IsReadWriteAllowed()))
+			{
+				/* Clear the endpoint bank to send its contents to the host */
+				Endpoint_ClearIN();
+
+				/* Wait until the endpoint is ready for more data */
+				if (Endpoint_WaitUntilReady())
+				  return;
+			}
+
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+				/* Send the Dataflash main memory page read command */
+				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+			}
+
+			/* Read one 16-byte chunk of data from the Dataflash */
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+			Endpoint_Write_8(Dataflash_ReceiveByte());
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+
+			/* Check if the current command is being aborted by the host */
+			if (IsMassStoreReset)
+			  return;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* If the endpoint is full, send its contents to the host */
+	if (!(Endpoint_IsReadWriteAllowed()))
+	  Endpoint_ClearIN();
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
+ *  the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the
+ *  Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
+ *  Dataflash.
+ *
+ *  \param[in] BlockAddress  Data block starting address for the write sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to write
+ *  \param[in] BufferPtr     Pointer to the data source RAM buffer
+ */
+void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
+                                      uint16_t TotalBlocks,
+                                      uint8_t* BufferPtr)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+	bool     UsingSecondBuffer   = false;
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+	/* Copy selected dataflash's current page contents to the Dataflash buffer */
+	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
+	Dataflash_SendAddressBytes(CurrDFPage, 0);
+	Dataflash_WaitWhileBusy();
+#endif
+
+	/* Send the Dataflash buffer write command */
+	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
+	Dataflash_SendAddressBytes(0, CurrDFPageByte);
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Write an endpoint packet sized data block to the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Write the Dataflash buffer contents back to the Dataflash page */
+				Dataflash_WaitWhileBusy();
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
+				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
+				  UsingSecondBuffer = !(UsingSecondBuffer);
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
+				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
+				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
+				{
+					/* Copy selected dataflash's current page contents to the Dataflash buffer */
+					Dataflash_WaitWhileBusy();
+					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
+					Dataflash_SendAddressBytes(CurrDFPage, 0);
+					Dataflash_WaitWhileBusy();
+				}
+#endif
+
+				/* Send the Dataflash buffer write command */
+				Dataflash_ToggleSelectedChipCS();
+				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
+				Dataflash_SendAddressBytes(0, 0);
+			}
+
+			/* Write one 16-byte chunk of data to the Dataflash */
+			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
+			  Dataflash_SendByte(*(BufferPtr++));
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* Write the Dataflash buffer contents back to the Dataflash page */
+	Dataflash_WaitWhileBusy();
+	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
+	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
+	Dataflash_WaitWhileBusy();
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
+ *  the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash
+ *  and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read
+ *  the files stored on the Dataflash.
+ *
+ *  \param[in] BlockAddress  Data block starting address for the read sequence
+ *  \param[in] TotalBlocks   Number of blocks of data to read
+ *  \param[out] BufferPtr    Pointer to the data destination RAM buffer
+ */
+void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
+                                     uint16_t TotalBlocks,
+                                     uint8_t* BufferPtr)
+{
+	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
+	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
+	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
+
+	/* Select the correct starting Dataflash IC for the block requested */
+	Dataflash_SelectChipFromPage(CurrDFPage);
+
+	/* Send the Dataflash main memory page read command */
+	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+	Dataflash_SendByte(0x00);
+
+	while (TotalBlocks)
+	{
+		uint8_t BytesInBlockDiv16 = 0;
+
+		/* Read an endpoint packet sized data block from the Dataflash */
+		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
+		{
+			/* Check if end of Dataflash page reached */
+			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
+			{
+				/* Reset the Dataflash buffer counter, increment the page counter */
+				CurrDFPageByteDiv16 = 0;
+				CurrDFPage++;
+
+				/* Select the next Dataflash chip based on the new Dataflash page index */
+				Dataflash_SelectChipFromPage(CurrDFPage);
+
+				/* Send the Dataflash main memory page read command */
+				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
+				Dataflash_SendAddressBytes(CurrDFPage, 0);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+				Dataflash_SendByte(0x00);
+			}
+
+			/* Read one 16-byte chunk of data from the Dataflash */
+			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
+			  *(BufferPtr++) = Dataflash_ReceiveByte();
+
+			/* Increment the Dataflash page 16 byte block counter */
+			CurrDFPageByteDiv16++;
+
+			/* Increment the block 16 byte block counter */
+			BytesInBlockDiv16++;
+		}
+
+		/* Decrement the blocks remaining counter */
+		TotalBlocks--;
+	}
+
+	/* Deselect all Dataflash chips */
+	Dataflash_DeselectChip();
+}
+
+/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
+void DataflashManager_ResetDataflashProtections(void)
+{
+	/* Select first Dataflash chip, send the read status register command */
+	Dataflash_SelectChip(DATAFLASH_CHIP1);
+	Dataflash_SendByte(DF_CMD_GETSTATUS);
+
+	/* Check if sector protection is enabled */
+	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
+	{
+		Dataflash_ToggleSelectedChipCS();
+
+		/* Send the commands to disable sector protection */
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
+	}
+
+	/* Select second Dataflash chip (if present on selected board), send read status register command */
+	#if (DATAFLASH_TOTALCHIPS == 2)
+	Dataflash_SelectChip(DATAFLASH_CHIP2);
+	Dataflash_SendByte(DF_CMD_GETSTATUS);
+
+	/* Check if sector protection is enabled */
+	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
+	{
+		Dataflash_ToggleSelectedChipCS();
+
+		/* Send the commands to disable sector protection */
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
+		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
+	}
+	#endif
+
+	/* Deselect current Dataflash chip */
+	Dataflash_DeselectChip();
+}
+
+/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working.
+ *
+ *  \return Boolean \c true if all media chips are working, \c false otherwise
+ */
+bool DataflashManager_CheckDataflashOperation(void)
+{
+	uint8_t ReturnByte;
+
+	/* Test first Dataflash IC is present and responding to commands */
+	Dataflash_SelectChip(DATAFLASH_CHIP1);
+	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
+	ReturnByte = Dataflash_ReceiveByte();
+	Dataflash_DeselectChip();
+
+	/* If returned data is invalid, fail the command */
+	if (ReturnByte != DF_MANUFACTURER_ATMEL)
+	  return false;
+
+	#if (DATAFLASH_TOTALCHIPS == 2)
+	/* Test second Dataflash IC is present and responding to commands */
+	Dataflash_SelectChip(DATAFLASH_CHIP2);
+	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
+	ReturnByte = Dataflash_ReceiveByte();
+	Dataflash_DeselectChip();
+
+	/* If returned data is invalid, fail the command */
+	if (ReturnByte != DF_MANUFACTURER_ATMEL)
+	  return false;
+	#endif
+
+	return true;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h b/lib/lufa/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h
new file mode 100644
index 000000000..bfb7b55c5
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h
@@ -0,0 +1,86 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for DataflashManager.c.
+ */
+
+#ifndef _DATAFLASH_MANAGER_H_
+#define _DATAFLASH_MANAGER_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+
+		#include "../MassStorage.h"
+		#include "../Descriptors.h"
+
+		#include <LUFA/Common/Common.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/Dataflash.h>
+
+	/* Preprocessor Checks: */
+		#if (DATAFLASH_PAGE_SIZE % 16)
+			#error Dataflash page size must be a multiple of 16 bytes.
+		#endif
+
+	/* Defines: */
+		/** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */
+		#define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
+
+		/** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
+		 *  storage media (Dataflash) using a different native block size. Do not change this value.
+		 */
+		#define VIRTUAL_MEMORY_BLOCK_SIZE           512
+
+		/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not
+		 *  change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size.
+		 */
+		#define VIRTUAL_MEMORY_BLOCKS               (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
+
+		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
+		#define LUN_MEDIA_BLOCKS                    (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
+
+	/* Function Prototypes: */
+		void DataflashManager_WriteBlocks(const uint32_t BlockAddress,
+		                                  uint16_t TotalBlocks);
+		void DataflashManager_ReadBlocks(const uint32_t BlockAddress,
+		                                 uint16_t TotalBlocks);
+		void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
+		                                      uint16_t TotalBlocks,
+		                                      uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
+		void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
+		                                     uint16_t TotalBlocks,
+		                                     uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
+		void DataflashManager_ResetDataflashProtections(void);
+		bool DataflashManager_CheckDataflashOperation(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c b/lib/lufa/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c
new file mode 100644
index 000000000..bb5775ca6
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c
@@ -0,0 +1,344 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  SCSI command processing routines, for SCSI commands issued by the host. Mass Storage
+ *  devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information,
+ *  which wrap around standard SCSI device commands for controlling the actual storage medium.
+ */
+
+#define  INCLUDE_FROM_SCSI_C
+#include "SCSI.h"
+
+/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
+ *  features and capabilities.
+ */
+static const SCSI_Inquiry_Response_t InquiryData =
+	{
+		.DeviceType          = DEVICE_TYPE_BLOCK,
+		.PeripheralQualifier = 0,
+
+		.Removable           = true,
+
+		.Version             = 0,
+
+		.ResponseDataFormat  = 2,
+		.NormACA             = false,
+		.TrmTsk              = false,
+		.AERC                = false,
+
+		.AdditionalLength    = 0x1F,
+
+		.SoftReset           = false,
+		.CmdQue              = false,
+		.Linked              = false,
+		.Sync                = false,
+		.WideBus16Bit        = false,
+		.WideBus32Bit        = false,
+		.RelAddr             = false,
+
+		.VendorID            = "LUFA",
+		.ProductID           = "Dataflash Disk",
+		.RevisionID          = {'0','.','0','0'},
+	};
+
+/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE
+ *  command is issued. This gives information on exactly why the last command failed to complete.
+ */
+static SCSI_Request_Sense_Response_t SenseData =
+	{
+		.ResponseCode        = 0x70,
+		.AdditionalLength    = 0x0A,
+	};
+
+
+/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches
+ *  to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns
+ *  a command failure due to a ILLEGAL REQUEST.
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise
+ */
+bool SCSI_DecodeSCSICommand(void)
+{
+	bool CommandSuccess = false;
+
+	/* Run the appropriate SCSI command hander function based on the passed command */
+	switch (CommandBlock.SCSICommandData[0])
+	{
+		case SCSI_CMD_INQUIRY:
+			CommandSuccess = SCSI_Command_Inquiry();
+			break;
+		case SCSI_CMD_REQUEST_SENSE:
+			CommandSuccess = SCSI_Command_Request_Sense();
+			break;
+		case SCSI_CMD_READ_CAPACITY_10:
+			CommandSuccess = SCSI_Command_Read_Capacity_10();
+			break;
+		case SCSI_CMD_SEND_DIAGNOSTIC:
+			CommandSuccess = SCSI_Command_Send_Diagnostic();
+			break;
+		case SCSI_CMD_WRITE_10:
+			CommandSuccess = SCSI_Command_ReadWrite_10(DATA_WRITE);
+			break;
+		case SCSI_CMD_READ_10:
+			CommandSuccess = SCSI_Command_ReadWrite_10(DATA_READ);
+			break;
+		case SCSI_CMD_MODE_SENSE_6:
+			CommandSuccess = SCSI_Command_ModeSense_6();
+			break;
+		case SCSI_CMD_START_STOP_UNIT:
+		case SCSI_CMD_TEST_UNIT_READY:
+		case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
+		case SCSI_CMD_VERIFY_10:
+			/* These commands should just succeed, no handling required */
+			CommandSuccess = true;
+			CommandBlock.DataTransferLength = 0;
+			break;
+		default:
+			/* Update the SENSE key to reflect the invalid command */
+			SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		                   SCSI_ASENSE_INVALID_COMMAND,
+		                   SCSI_ASENSEQ_NO_QUALIFIER);
+			break;
+	}
+
+	/* Check if command was successfully processed */
+	if (CommandSuccess)
+	{
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD,
+		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return true;
+	}
+
+	return false;
+}
+
+/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features
+ *  and capabilities to the host.
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Inquiry(void)
+{
+	uint16_t AllocationLength  = SwapEndian_16(*(uint16_t*)&CommandBlock.SCSICommandData[3]);
+	uint16_t BytesTransferred  = MIN(AllocationLength, sizeof(InquiryData));
+
+	/* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */
+	if ((CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||
+	     CommandBlock.SCSICommandData[2])
+	{
+		/* Optional but unsupported bits set - update the SENSE key and fail the request */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	/* Write the INQUIRY data to the endpoint */
+	Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL);
+
+	/* Pad out remaining bytes with 0x00 */
+	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
+
+	/* Finalize the stream transfer to send the last packet */
+	Endpoint_ClearIN();
+
+	/* Succeed the command and update the bytes transferred counter */
+	CommandBlock.DataTransferLength -= BytesTransferred;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command,
+ *  including the error code and additional error information so that the host can determine why a command failed to complete.
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Request_Sense(void)
+{
+	uint8_t  AllocationLength = CommandBlock.SCSICommandData[4];
+	uint8_t  BytesTransferred = MIN(AllocationLength, sizeof(SenseData));
+
+	/* Send the SENSE data - this indicates to the host the status of the last command */
+	Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL);
+
+	/* Pad out remaining bytes with 0x00 */
+	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
+
+	/* Finalize the stream transfer to send the last packet */
+	Endpoint_ClearIN();
+
+	/* Succeed the command and update the bytes transferred counter */
+	CommandBlock.DataTransferLength -= BytesTransferred;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity
+ *  on the selected Logical Unit (drive), as a number of OS-sized blocks.
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Read_Capacity_10(void)
+{
+	/* Send the total number of logical blocks in the current LUN */
+	Endpoint_Write_32_BE(LUN_MEDIA_BLOCKS - 1);
+
+	/* Send the logical block size of the device (must be 512 bytes) */
+	Endpoint_Write_32_BE(VIRTUAL_MEMORY_BLOCK_SIZE);
+
+	/* Check if the current command is being aborted by the host */
+	if (IsMassStoreReset)
+	  return false;
+
+	/* Send the endpoint data packet to the host */
+	Endpoint_ClearIN();
+
+	/* Succeed the command and update the bytes transferred counter */
+	CommandBlock.DataTransferLength -= 8;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the
+ *  board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is
+ *  supported.
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_Send_Diagnostic(void)
+{
+	/* Check to see if the SELF TEST bit is not set */
+	if (!(CommandBlock.SCSICommandData[1] & (1 << 2)))
+	{
+		/* Only self-test supported - update SENSE key and fail the command */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	/* Check to see if all attached Dataflash ICs are functional */
+	if (!(DataflashManager_CheckDataflashOperation()))
+	{
+		/* Update SENSE key with a hardware error condition and return command fail */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR,
+		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	/* Succeed the command and update the bytes transferred counter */
+	CommandBlock.DataTransferLength = 0;
+
+	return true;
+}
+
+/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address
+ *  and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual
+ *  reading and writing of the data.
+ *
+ *  \param[in] IsDataRead  Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_ReadWrite_10(const bool IsDataRead)
+{
+	uint32_t BlockAddress;
+	uint16_t TotalBlocks;
+
+	/* Check if the disk is write protected or not */
+	if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY)
+	{
+		/* Block address is invalid, update SENSE key and return command fail */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT,
+		               SCSI_ASENSE_WRITE_PROTECTED,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	BlockAddress = SwapEndian_32(*(uint32_t*)&CommandBlock.SCSICommandData[2]);
+	TotalBlocks  = SwapEndian_16(*(uint16_t*)&CommandBlock.SCSICommandData[7]);
+
+	/* Check if the block address is outside the maximum allowable value for the LUN */
+	if (BlockAddress >= LUN_MEDIA_BLOCKS)
+	{
+		/* Block address is invalid, update SENSE key and return command fail */
+		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
+		               SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE,
+		               SCSI_ASENSEQ_NO_QUALIFIER);
+
+		return false;
+	}
+
+	#if (TOTAL_LUNS > 1)
+	/* Adjust the given block address to the real media address based on the selected LUN */
+	BlockAddress += ((uint32_t)CommandBlock.LUN * LUN_MEDIA_BLOCKS);
+	#endif
+
+	/* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
+	if (IsDataRead == DATA_READ)
+	  DataflashManager_ReadBlocks(BlockAddress, TotalBlocks);
+	else
+	  DataflashManager_WriteBlocks(BlockAddress, TotalBlocks);
+
+	/* Update the bytes transferred counter and succeed the command */
+	CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);
+
+	return true;
+}
+
+/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about
+ *  the SCSI device, as well as the device's Write Protect status.
+ *
+ *  \return Boolean \c true if the command completed successfully, \c false otherwise.
+ */
+static bool SCSI_Command_ModeSense_6(void)
+{
+	/* Send an empty header response with the Write Protect flag status */
+	Endpoint_Write_8(0x00);
+	Endpoint_Write_8(0x00);
+	Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00);
+	Endpoint_Write_8(0x00);
+	Endpoint_ClearIN();
+
+	/* Update the bytes transferred counter and succeed the command */
+	CommandBlock.DataTransferLength -= 4;
+
+	return true;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h b/lib/lufa/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h
new file mode 100644
index 000000000..b1488b492
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h
@@ -0,0 +1,150 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for SCSI.c.
+ */
+
+#ifndef _SCSI_H_
+#define _SCSI_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Common/Common.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+
+		#include "../MassStorage.h"
+		#include "../Descriptors.h"
+		#include "DataflashManager.h"
+
+	/* Macros: */
+		/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
+		 *  is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
+		 *  the last command failure) in a quick and easy manner.
+		 *
+		 *  \param[in] Key    New SCSI sense key to set the sense code to
+		 *  \param[in] Acode  New SCSI additional sense key to set the additional sense code to
+		 *  \param[in] Aqual  New SCSI additional sense key qualifier to set the additional sense qualifier code to
+		 */
+		#define SCSI_SET_SENSE(Key, Acode, Aqual)  do { SenseData.SenseKey                 = (Key);   \
+		                                                SenseData.AdditionalSenseCode      = (Acode); \
+		                                                SenseData.AdditionalSenseQualifier = (Aqual); } while (0)
+
+		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */
+		#define DATA_READ           true
+
+		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */
+		#define DATA_WRITE          false
+
+		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */
+		#define DEVICE_TYPE_BLOCK   0x00
+
+		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */
+		#define DEVICE_TYPE_CDROM   0x05
+
+	/* Type Defines: */
+		/** Type define for a SCSI response structure to a SCSI INQUIRY command. For details of the
+		 *  structure contents, refer to the SCSI specifications.
+		 */
+		typedef struct
+		{
+			unsigned DeviceType          : 5;
+			unsigned PeripheralQualifier : 3;
+
+			unsigned Reserved            : 7;
+			unsigned Removable           : 1;
+
+			uint8_t  Version;
+
+			unsigned ResponseDataFormat  : 4;
+			unsigned Reserved2           : 1;
+			unsigned NormACA             : 1;
+			unsigned TrmTsk              : 1;
+			unsigned AERC                : 1;
+
+			uint8_t  AdditionalLength;
+			uint8_t  Reserved3[2];
+
+			unsigned SoftReset           : 1;
+			unsigned CmdQue              : 1;
+			unsigned Reserved4           : 1;
+			unsigned Linked              : 1;
+			unsigned Sync                : 1;
+			unsigned WideBus16Bit        : 1;
+			unsigned WideBus32Bit        : 1;
+			unsigned RelAddr             : 1;
+
+			uint8_t  VendorID[8];
+			uint8_t  ProductID[16];
+			uint8_t  RevisionID[4];
+		} MS_SCSI_Inquiry_Response_t;
+
+		/** Type define for a SCSI sense structure to a SCSI REQUEST SENSE command. For details of the
+		 *  structure contents, refer to the SCSI specifications.
+		 */
+		typedef struct
+		{
+			uint8_t  ResponseCode;
+
+			uint8_t  SegmentNumber;
+
+			unsigned SenseKey            : 4;
+			unsigned Reserved            : 1;
+			unsigned ILI                 : 1;
+			unsigned EOM                 : 1;
+			unsigned FileMark            : 1;
+
+			uint8_t  Information[4];
+			uint8_t  AdditionalLength;
+			uint8_t  CmdSpecificInformation[4];
+			uint8_t  AdditionalSenseCode;
+			uint8_t  AdditionalSenseQualifier;
+			uint8_t  FieldReplaceableUnitCode;
+			uint8_t  SenseKeySpecific[3];
+		} MS_SCSI_Request_Sense_Response_t;
+
+	/* Function Prototypes: */
+		bool SCSI_DecodeSCSICommand(void);
+
+		#if defined(INCLUDE_FROM_SCSI_C)
+			static bool SCSI_Command_Inquiry(void);
+			static bool SCSI_Command_Request_Sense(void);
+			static bool SCSI_Command_Read_Capacity_10(void);
+			static bool SCSI_Command_Send_Diagnostic(void);
+			static bool SCSI_Command_ReadWrite_10(const bool IsDataRead);
+			static bool SCSI_Command_ModeSense_6(void);
+		#endif
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/MassStorage/MassStorage.c b/lib/lufa/Demos/Device/LowLevel/MassStorage/MassStorage.c
new file mode 100644
index 000000000..f30969c67
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MassStorage/MassStorage.c
@@ -0,0 +1,332 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the Mass Storage demo. This file contains the main tasks of the demo and
+ *  is responsible for the initial application hardware configuration.
+ */
+
+#define  INCLUDE_FROM_MASSSTORAGE_C
+#include "MassStorage.h"
+
+/** Structure to hold the latest Command Block Wrapper issued by the host, containing a SCSI command to execute. */
+MS_CommandBlockWrapper_t  CommandBlock;
+
+/** Structure to hold the latest Command Status Wrapper to return to the host, containing the status of the last issued command. */
+MS_CommandStatusWrapper_t CommandStatus = { .Signature = MS_CSW_SIGNATURE };
+
+/** Flag to asynchronously abort any in-progress data transfers upon the reception of a mass storage reset command. */
+volatile bool IsMassStoreReset = false;
+
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		MassStorage_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	Dataflash_Init();
+	USB_Init();
+
+	/* Check if the Dataflash is working, abort if not */
+	if (!(DataflashManager_CheckDataflashOperation()))
+	{
+		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+		for(;;);
+	}
+
+	/* Clear Dataflash sector protections, if enabled */
+	DataflashManager_ResetDataflashProtections();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
+void EVENT_USB_Device_Connect(void)
+{
+	/* Indicate USB enumerating */
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+	/* Reset the MSReset flag upon connection */
+	IsMassStoreReset = false;
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs and stops the Mass Storage management task.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Indicate USB not ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
+ *  of the USB device after enumeration - the device endpoints are configured and the Mass Storage management task started.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup Mass Storage Data Endpoints */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_IN_EPADDR,  EP_TYPE_BULK, MASS_STORAGE_IO_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_OUT_EPADDR, EP_TYPE_BULK, MASS_STORAGE_IO_EPSIZE, 1);
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	/* Process UFI specific control requests */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case MS_REQ_MassStorageReset:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+				Endpoint_ClearStatusStage();
+
+				/* Indicate that the current transfer should be aborted */
+				IsMassStoreReset = true;
+			}
+
+			break;
+		case MS_REQ_GetMaxLUN:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Indicate to the host the number of supported LUNs (virtual disks) on the device */
+				Endpoint_Write_8(TOTAL_LUNS - 1);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+	}
+}
+
+/** Task to manage the Mass Storage interface, reading in Command Block Wrappers from the host, processing the SCSI commands they
+ *  contain, and returning Command Status Wrappers back to the host to indicate the success or failure of the last issued command.
+ */
+void MassStorage_Task(void)
+{
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	/* Process sent command block from the host if one has been sent */
+	if (ReadInCommandBlock())
+	{
+		/* Indicate busy */
+		LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+
+		/* Check direction of command, select Data IN endpoint if data is from the device */
+		if (CommandBlock.Flags & MS_COMMAND_DIR_DATA_IN)
+		  Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR);
+
+		/* Decode the received SCSI command, set returned status code */
+		CommandStatus.Status = SCSI_DecodeSCSICommand() ? MS_SCSI_COMMAND_Pass : MS_SCSI_COMMAND_Fail;
+
+		/* Load in the CBW tag into the CSW to link them together */
+		CommandStatus.Tag = CommandBlock.Tag;
+
+		/* Load in the data residue counter into the CSW */
+		CommandStatus.DataTransferResidue = CommandBlock.DataTransferLength;
+
+		/* Stall the selected data pipe if command failed (if data is still to be transferred) */
+		if ((CommandStatus.Status == MS_SCSI_COMMAND_Fail) && (CommandStatus.DataTransferResidue))
+		  Endpoint_StallTransaction();
+
+		/* Return command status block to the host */
+		ReturnCommandStatus();
+
+		/* Indicate ready */
+		LEDs_SetAllLEDs(LEDMASK_USB_READY);
+	}
+
+	/* Check if a Mass Storage Reset occurred */
+	if (IsMassStoreReset)
+	{
+		/* Reset the data endpoint banks */
+		Endpoint_ResetEndpoint(MASS_STORAGE_OUT_EPADDR);
+		Endpoint_ResetEndpoint(MASS_STORAGE_IN_EPADDR);
+
+		Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR);
+		Endpoint_ClearStall();
+		Endpoint_ResetDataToggle();
+		Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR);
+		Endpoint_ClearStall();
+		Endpoint_ResetDataToggle();
+
+		/* Clear the abort transfer flag */
+		IsMassStoreReset = false;
+	}
+}
+
+/** Function to read in a command block from the host, via the bulk data OUT endpoint. This function reads in the next command block
+ *  if one has been issued, and performs validation to ensure that the block command is valid.
+ *
+ *  \return Boolean \c true if a valid command block has been read in from the endpoint, \c false otherwise
+ */
+static bool ReadInCommandBlock(void)
+{
+	uint16_t BytesTransferred;
+
+	/* Select the Data Out endpoint */
+	Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR);
+
+	/* Abort if no command has been sent from the host */
+	if (!(Endpoint_IsOUTReceived()))
+	  return false;
+
+	/* Read in command block header */
+	BytesTransferred = 0;
+	while (Endpoint_Read_Stream_LE(&CommandBlock, (sizeof(CommandBlock) - sizeof(CommandBlock.SCSICommandData)),
+	                               &BytesTransferred) == ENDPOINT_RWSTREAM_IncompleteTransfer)
+	{
+		/* Check if the current command is being aborted by the host */
+		if (IsMassStoreReset)
+		  return false;
+	}
+
+	/* Verify the command block - abort if invalid */
+	if ((CommandBlock.Signature         != MS_CBW_SIGNATURE) ||
+	    (CommandBlock.LUN               >= TOTAL_LUNS)       ||
+		(CommandBlock.Flags              & 0x1F)             ||
+		(CommandBlock.SCSICommandLength == 0)                ||
+		(CommandBlock.SCSICommandLength >  sizeof(CommandBlock.SCSICommandData)))
+	{
+		/* Stall both data pipes until reset by host */
+		Endpoint_StallTransaction();
+		Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR);
+		Endpoint_StallTransaction();
+
+		return false;
+	}
+
+	/* Read in command block command data */
+	BytesTransferred = 0;
+	while (Endpoint_Read_Stream_LE(&CommandBlock.SCSICommandData, CommandBlock.SCSICommandLength,
+	                               &BytesTransferred) == ENDPOINT_RWSTREAM_IncompleteTransfer)
+	{
+		/* Check if the current command is being aborted by the host */
+		if (IsMassStoreReset)
+		  return false;
+	}
+
+	/* Finalize the stream transfer to send the last packet */
+	Endpoint_ClearOUT();
+
+	return true;
+}
+
+/** Returns the filled Command Status Wrapper back to the host via the bulk data IN endpoint, waiting for the host to clear any
+ *  stalled data endpoints as needed.
+ */
+static void ReturnCommandStatus(void)
+{
+	uint16_t BytesTransferred;
+
+	/* Select the Data Out endpoint */
+	Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR);
+
+	/* While data pipe is stalled, wait until the host issues a control request to clear the stall */
+	while (Endpoint_IsStalled())
+	{
+		/* Check if the current command is being aborted by the host */
+		if (IsMassStoreReset)
+		  return;
+	}
+
+	/* Select the Data In endpoint */
+	Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR);
+
+	/* While data pipe is stalled, wait until the host issues a control request to clear the stall */
+	while (Endpoint_IsStalled())
+	{
+		/* Check if the current command is being aborted by the host */
+		if (IsMassStoreReset)
+		  return;
+	}
+
+	/* Write the CSW to the endpoint */
+	BytesTransferred = 0;
+	while (Endpoint_Write_Stream_LE(&CommandStatus, sizeof(CommandStatus),
+	                                &BytesTransferred) == ENDPOINT_RWSTREAM_IncompleteTransfer)
+	{
+		/* Check if the current command is being aborted by the host */
+		if (IsMassStoreReset)
+		  return;
+	}
+
+	/* Finalize the stream transfer to send the last packet */
+	Endpoint_ClearIN();
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/MassStorage/MassStorage.h b/lib/lufa/Demos/Device/LowLevel/MassStorage/MassStorage.h
new file mode 100644
index 000000000..f59e18735
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MassStorage/MassStorage.h
@@ -0,0 +1,92 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for MassStorage.c.
+ */
+
+#ifndef _MASS_STORAGE_H_
+#define _MASS_STORAGE_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+
+		#include "Descriptors.h"
+
+		#include "Lib/SCSI.h"
+		#include "Lib/DataflashManager.h"
+		#include "Config/AppConfig.h"
+
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Dataflash.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY       LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING   (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY         (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR         (LEDS_LED1 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+		#define LEDMASK_USB_BUSY           LEDS_LED2
+
+	/* Global Variables: */
+		extern MS_CommandBlockWrapper_t  CommandBlock;
+		extern MS_CommandStatusWrapper_t CommandStatus;
+		extern volatile bool             IsMassStoreReset;
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void MassStorage_Task(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+		#if defined(INCLUDE_FROM_MASSSTORAGE_C)
+			static bool ReadInCommandBlock(void);
+			static void ReturnCommandStatus(void);
+		#endif
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/MassStorage/MassStorage.txt b/lib/lufa/Demos/Device/LowLevel/MassStorage/MassStorage.txt
new file mode 100644
index 000000000..b070dc83a
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MassStorage/MassStorage.txt
@@ -0,0 +1,100 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Mass Storage Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Mass Storage Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Bulk-Only Transport</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Mass Storage Standard \n
+ *        USB Bulk-Only Transport Standard \n
+ *        SCSI Primary Commands Specification \n
+ *        SCSI Block Commands Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Mass Storage device demonstration application. This gives a simple
+ *  reference application for implementing a USB Mass Storage device using
+ *  the basic USB UFI drivers in all modern OSes (i.e. no special drivers
+ *  required).
+ *
+ *  On start-up the system will automatically enumerate and function as an
+ *  external mass storage device which may be formatted and used in the same
+ *  manner as commercial USB Mass Storage devices.
+ *
+ *  You will need to format the mass storage drive upon first run of this
+ *  demonstration - as the device acts only as a data block transport between
+ *  the host and the storage media, it does not matter what file system is used,
+ *  as the data interpretation is performed by the host and not the USB device.
+ *
+ *  This demo is not restricted to only a single LUN (logical disk); by changing
+ *  the TOTAL_LUNS value in DataflashManager.h, any number of LUNs can be used
+ *  (from 1 to 255), with each LUN being allocated an equal portion of the available
+ *  Dataflash memory.
+ *
+ *  The USB control endpoint is managed entirely by the library using endpoint
+ *  interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for
+ *  the host to reset the Mass Storage device state during long transfers without
+ *  the need for complicated polling logic.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>TOTAL_LUNS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive
+ *        - this can be set to any positive non-zero amount.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>DISK_READ_ONLY</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Indicates if the disk should be write protected or not.</td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/LowLevel/MassStorage/asf.xml b/lib/lufa/Demos/Device/LowLevel/MassStorage/asf.xml
new file mode 100644
index 000000000..68ae2c28e
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MassStorage/asf.xml
@@ -0,0 +1,67 @@
+<asf xmlversion="1.0">

+	<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.avr8">

+		<require idref="lufa.demos.device.lowlevel.mass_storage"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.xmega">

+		<require idref="lufa.demos.device.lowlevel.mass_storage"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.lowlevel.mass_storage" caption="Mass Storage Device Demo (Low Level APIs)">

+		<info type="description" value="summary">

+		Mass Storage device demo, implementing a basic USB storage disk using a Dataflash memory IC. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Low Level APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="Mass Storage Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="MassStorage.txt"/>

+

+		<build type="c-source" value="MassStorage.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="c-source" value="Lib/DataflashManager.c"/>

+		<build type="c-source" value="Lib/SCSI.c"/>

+		<build type="header-file" value="MassStorage.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+		<build type="header-file" value="Lib/DataflashManager.h"/>

+		<build type="header-file" value="Lib/SCSI.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

+		<build type="header-file" value="Config/AppConfig.h"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.dataflash"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/LowLevel/MassStorage/doxyfile b/lib/lufa/Demos/Device/LowLevel/MassStorage/doxyfile
new file mode 100644
index 000000000..84c2d3d0b
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MassStorage/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Mass Storage Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/LowLevel/MassStorage/makefile b/lib/lufa/Demos/Device/LowLevel/MassStorage/makefile
new file mode 100644
index 000000000..58646499f
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MassStorage/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = MassStorage
+SRC          = $(TARGET).c Descriptors.c Lib/DataflashManager.c Lib/SCSI.c $(LUFA_SRC_USB)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h b/lib/lufa/Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h
new file mode 100644
index 000000000..299d2ec85
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               1
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/Mouse/Descriptors.c b/lib/lufa/Demos/Device/LowLevel/Mouse/Descriptors.c
new file mode 100644
index 000000000..368ddc66e
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Mouse/Descriptors.c
@@ -0,0 +1,240 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** HID class report descriptor. This is a special descriptor constructed with values from the
+ *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
+ *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
+ *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
+ *  more details on HID report descriptors.
+ */
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
+{
+	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+	HID_RI_USAGE(8, 0x02), /* Mouse */
+	HID_RI_COLLECTION(8, 0x01), /* Application */
+		HID_RI_USAGE(8, 0x01), /* Pointer */
+		HID_RI_COLLECTION(8, 0x00), /* Physical */
+			HID_RI_USAGE_PAGE(8, 0x09), /* Button */
+			HID_RI_USAGE_MINIMUM(8, 0x01),
+			HID_RI_USAGE_MAXIMUM(8, 0x03),
+			HID_RI_LOGICAL_MINIMUM(8, 0x00),
+			HID_RI_LOGICAL_MAXIMUM(8, 0x01),
+			HID_RI_REPORT_COUNT(8, 0x03),
+			HID_RI_REPORT_SIZE(8, 0x01),
+			HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+			HID_RI_REPORT_COUNT(8, 0x01),
+			HID_RI_REPORT_SIZE(8, 0x05),
+			HID_RI_INPUT(8, HID_IOF_CONSTANT),
+			HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+			HID_RI_USAGE(8, 0x30), /* Usage X */
+			HID_RI_USAGE(8, 0x31), /* Usage Y */
+			HID_RI_LOGICAL_MINIMUM(8, -1),
+			HID_RI_LOGICAL_MAXIMUM(8, 1),
+			HID_RI_PHYSICAL_MINIMUM(8, -1),
+			HID_RI_PHYSICAL_MAXIMUM(8, 1),
+			HID_RI_REPORT_COUNT(8, 0x02),
+			HID_RI_REPORT_SIZE(8, 0x08),
+			HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
+		HID_RI_END_COLLECTION(0),
+	HID_RI_END_COLLECTION(0),
+};
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = USB_CSCP_NoDeviceClass,
+	.SubClass               = USB_CSCP_NoDeviceSubclass,
+	.Protocol               = USB_CSCP_NoDeviceProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2041,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.HID_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_Mouse,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = HID_CSCP_HIDClass,
+			.SubClass               = HID_CSCP_BootSubclass,
+			.Protocol               = HID_CSCP_MouseBootProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.HID_MouseHID =
+		{
+			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+			.HIDSpec                = VERSION_BCD(1,1,1),
+			.CountryCode            = 0x00,
+			.TotalReportDescriptors = 1,
+			.HIDReportType          = HID_DTYPE_Report,
+			.HIDReportLength        = sizeof(MouseReport)
+		},
+
+	.HID_ReportINEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = MOUSE_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = MOUSE_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mouse Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+		case HID_DTYPE_HID:
+			Address = &ConfigurationDescriptor.HID_MouseHID;
+			Size    = sizeof(USB_HID_Descriptor_HID_t);
+			break;
+		case HID_DTYPE_Report:
+			Address = &MouseReport;
+			Size    = sizeof(MouseReport);
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Mouse/Descriptors.h b/lib/lufa/Demos/Device/LowLevel/Mouse/Descriptors.h
new file mode 100644
index 000000000..b3fc96890
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Mouse/Descriptors.h
@@ -0,0 +1,93 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+	/* Macros: */
+		/** Endpoint address of the Mouse HID reporting IN endpoint. */
+		#define MOUSE_EPADDR              (ENDPOINT_DIR_IN | 1)
+
+		/** Size in bytes of the Mouse HID reporting IN endpoint. */
+		#define MOUSE_EPSIZE              8
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Mouse HID Interface
+			USB_Descriptor_Interface_t            HID_Interface;
+			USB_HID_Descriptor_HID_t              HID_MouseHID;
+			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_Mouse = 0, /**< Mouse interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Mouse/Mouse.c b/lib/lufa/Demos/Device/LowLevel/Mouse/Mouse.c
new file mode 100644
index 000000000..0065a9bb4
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Mouse/Mouse.c
@@ -0,0 +1,311 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the Mouse demo. This file contains the main tasks of the demo and
+ *  is responsible for the initial application hardware configuration.
+ */
+
+#include "Mouse.h"
+
+/** Indicates what report mode the host has requested, true for normal HID reporting mode, \c false for special boot
+ *  protocol reporting mode.
+ */
+static bool UsingReportProtocol = true;
+
+/** Current Idle period. This is set by the host via a Set Idle HID class request to silence the device's reports
+ *  for either the entire idle duration, or until the report status changes (e.g. the user moves the mouse).
+ */
+static uint16_t IdleCount = 0;
+
+/** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle
+ *  milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request
+ *  the current idle period via a Get Idle HID class request, thus its value must be preserved.
+ */
+static uint16_t IdleMSRemaining = 0;
+
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		Mouse_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	Buttons_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Device_Connect(void)
+{
+	/* Indicate USB enumerating */
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+	/* Default to report protocol on connect */
+	UsingReportProtocol = true;
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs and stops the USB management and Mouse reporting tasks.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Indicate USB not ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
+ *  of the USB device after enumeration - the device endpoints are configured and the mouse reporting task started.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup HID Report Endpoint */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_EPADDR, EP_TYPE_INTERRUPT, MOUSE_EPSIZE, 1);
+
+	/* Turn on Start-of-Frame events for tracking HID report period expiry */
+	USB_Device_EnableSOFEvents();
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	/* Handle HID Class specific requests */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case HID_REQ_GetReport:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				USB_MouseReport_Data_t MouseReportData;
+
+				/* Create the next mouse report for transmission to the host */
+				CreateMouseReport(&MouseReportData);
+
+				Endpoint_ClearSETUP();
+
+				/* Write the report data to the control endpoint */
+				Endpoint_Write_Control_Stream_LE(&MouseReportData, sizeof(MouseReportData));
+				Endpoint_ClearOUT();
+
+				/* Clear the report data afterwards */
+				memset(&MouseReportData, 0, sizeof(MouseReportData));
+			}
+
+			break;
+		case HID_REQ_GetProtocol:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Write the current protocol flag to the host */
+				Endpoint_Write_8(UsingReportProtocol);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case HID_REQ_SetProtocol:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+				Endpoint_ClearStatusStage();
+
+				/* Set or clear the flag depending on what the host indicates that the current Protocol should be */
+				UsingReportProtocol = (USB_ControlRequest.wValue != 0);
+			}
+
+			break;
+		case HID_REQ_SetIdle:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+				Endpoint_ClearStatusStage();
+
+				/* Get idle period in MSB, must multiply by 4 to get the duration in milliseconds */
+				IdleCount = ((USB_ControlRequest.wValue & 0xFF00) >> 6);
+			}
+
+			break;
+		case HID_REQ_GetIdle:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Write the current idle duration to the host, must be divided by 4 before sent to host */
+				Endpoint_Write_8(IdleCount >> 2);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+	}
+}
+
+/** Event handler for the USB device Start Of Frame event. */
+void EVENT_USB_Device_StartOfFrame(void)
+{
+	/* One millisecond has elapsed, decrement the idle time remaining counter if it has not already elapsed */
+	if (IdleMSRemaining)
+	  IdleMSRemaining--;
+}
+
+/** Fills the given HID report data structure with the next HID report to send to the host.
+ *
+ *  \param[out] ReportData  Pointer to a HID report data structure to be filled
+ */
+void CreateMouseReport(USB_MouseReport_Data_t* const ReportData)
+{
+	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
+	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
+
+	/* Clear the report contents */
+	memset(ReportData, 0, sizeof(USB_MouseReport_Data_t));
+
+	if (JoyStatus_LCL & JOY_UP)
+	  ReportData->Y = -1;
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  ReportData->Y =  1;
+
+	if (JoyStatus_LCL & JOY_LEFT)
+	  ReportData->X = -1;
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  ReportData->X =  1;
+
+	if (JoyStatus_LCL & JOY_PRESS)
+	  ReportData->Button |= (1 << 0);
+
+	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
+	  ReportData->Button |= (1 << 1);
+}
+
+/** Sends the next HID report to the host, via the keyboard data endpoint. */
+void SendNextReport(void)
+{
+	static USB_MouseReport_Data_t PrevMouseReportData;
+	USB_MouseReport_Data_t        MouseReportData;
+	bool                          SendReport;
+
+	/* Create the next mouse report for transmission to the host */
+	CreateMouseReport(&MouseReportData);
+
+	/* Check to see if the report data has changed - if so a report MUST be sent */
+	SendReport = (memcmp(&PrevMouseReportData, &MouseReportData, sizeof(USB_MouseReport_Data_t)) != 0);
+
+	/* Override the check if the Y or X values are non-zero - we want continuous movement while the joystick
+	 * is being held down (via continuous reports), otherwise the cursor will only move once per joystick toggle */
+	if ((MouseReportData.Y != 0) || (MouseReportData.X != 0))
+	  SendReport = true;
+
+	/* Check if the idle period is set and has elapsed */
+	if (IdleCount && (!(IdleMSRemaining)))
+	{
+		/* Reset the idle time remaining counter */
+		IdleMSRemaining = IdleCount;
+
+		/* Idle period is set and has elapsed, must send a report to the host */
+		SendReport = true;
+	}
+
+	/* Select the Mouse Report Endpoint */
+	Endpoint_SelectEndpoint(MOUSE_EPADDR);
+
+	/* Check if Mouse Endpoint Ready for Read/Write and if we should send a new report */
+	if (Endpoint_IsReadWriteAllowed() && SendReport)
+	{
+		/* Save the current report data for later comparison to check for changes */
+		PrevMouseReportData = MouseReportData;
+
+		/* Write Mouse Report Data */
+		Endpoint_Write_Stream_LE(&MouseReportData, sizeof(MouseReportData), NULL);
+
+		/* Finalize the stream transfer to send the last packet */
+		Endpoint_ClearIN();
+	}
+}
+
+/** Task to manage HID report generation and transmission to the host, when in report mode. */
+void Mouse_Task(void)
+{
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	/* Send the next mouse report to the host */
+	SendNextReport();
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Mouse/Mouse.h b/lib/lufa/Demos/Device/LowLevel/Mouse/Mouse.h
new file mode 100644
index 000000000..9d72b7977
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Mouse/Mouse.h
@@ -0,0 +1,81 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Mouse.c.
+ */
+
+#ifndef _MOUSE_H_
+#define _MOUSE_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdbool.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void Mouse_Task(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+		void EVENT_USB_Device_StartOfFrame(void);
+
+		void CreateMouseReport(USB_MouseReport_Data_t* const ReportData);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Mouse/Mouse.txt b/lib/lufa/Demos/Device/LowLevel/Mouse/Mouse.txt
new file mode 100644
index 000000000..7246ede31
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Mouse/Mouse.txt
@@ -0,0 +1,76 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Mouse Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Human Interface Device (HID)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>N/A</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Low Speed Mode \n
+ *        Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Mouse demonstration application. This gives a simple reference
+ *  application for implementing a USB Mouse using the basic USB HID
+ *  drivers in all modern OSes (i.e. no special drivers required). It is
+ *  boot protocol compatible, and thus works under compatible BIOS as if
+ *  it was a native mouse (e.g. PS/2).
+ *
+ *  On start-up the system will automatically enumerate and function
+ *  as a mouse when the USB connection to a host is present. To use
+ *  the mouse, move the joystick to move the pointer, and push the
+ *  joystick inwards to simulate a left-button click. The HWB serves as
+ *  the right mouse button.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/LowLevel/Mouse/asf.xml b/lib/lufa/Demos/Device/LowLevel/Mouse/asf.xml
new file mode 100644
index 000000000..ac21d0771
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Mouse/asf.xml
@@ -0,0 +1,62 @@
+<asf xmlversion="1.0">

+	<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.avr8">

+		<require idref="lufa.demos.device.lowlevel.mouse"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.xmega">

+		<require idref="lufa.demos.device.lowlevel.mouse"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.lowlevel.mouse" caption="Mouse HID Device Demo (Low Level APIs)">

+		<info type="description" value="summary">

+		Mouse device demo, implementing a basic USB mouse device that can send movement information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Low Level APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="HID Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="Mouse.txt"/>

+

+		<build type="c-source" value="Mouse.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="Mouse.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.buttons"/>

+		<require idref="lufa.drivers.board.joystick"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/LowLevel/Mouse/doxyfile b/lib/lufa/Demos/Device/LowLevel/Mouse/doxyfile
new file mode 100644
index 000000000..37bc83018
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Mouse/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Mouse Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/LowLevel/Mouse/makefile b/lib/lufa/Demos/Device/LowLevel/Mouse/makefile
new file mode 100644
index 000000000..37303b3e4
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/Mouse/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = Mouse
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Config/AppConfig.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Config/AppConfig.h
new file mode 100644
index 000000000..0e4d1780a
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Config/AppConfig.h
@@ -0,0 +1,60 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define CLIENT_IP_ADDRESS                { 10,     0,    0,    1}
+	#define SERVER_IP_ADDRESS                { 10,     0,    0,    2}
+
+	#define ADAPTER_MAC_ADDRESS              {0x02, 0x00, 0x02, 0x00, 0x02, 0x00}
+	#define SERVER_MAC_ADDRESS               {0x00, 0x01, 0x00, 0x01, 0x00, 0x01}
+
+	#define NO_DECODE_ETHERNET
+	#define NO_DECODE_ARP
+	#define NO_DECODE_IP
+	#define NO_DECODE_ICMP
+	#define NO_DECODE_TCP
+	#define NO_DECODE_UDP
+	#define NO_DECODE_DHCP
+
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Config/LUFAConfig.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Config/LUFAConfig.h
new file mode 100644
index 000000000..cc828a108
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               3
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c
new file mode 100644
index 000000000..e42b31860
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c
@@ -0,0 +1,244 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = CDC_CSCP_CDCClass,
+	.SubClass               = CDC_CSCP_NoSpecificSubclass,
+	.Protocol               = CDC_CSCP_NoSpecificProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x204C,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = NO_DESCRIPTOR,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 2,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.CDC_CCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_VendorSpecificProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC_Functional_Header =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
+
+			.CDCSpecification       = VERSION_BCD(1,1,0),
+		},
+
+	.CDC_Functional_ACM =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
+
+			.Capabilities           = 0x00,
+		},
+
+	.CDC_Functional_Union =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
+
+			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
+			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
+		},
+
+	.CDC_NotificationEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
+			.PollingIntervalMS      = 0xFF
+		},
+
+	.CDC_DCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = CDC_CSCP_CDCDataClass,
+			.SubClass               = CDC_CSCP_NoDataSubclass,
+			.Protocol               = CDC_CSCP_NoDataProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.RNDIS_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_RX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.RNDIS_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_TX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA RNDIS CDC Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h
new file mode 100644
index 000000000..84c336f16
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h
@@ -0,0 +1,112 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Endpoint address of the CDC device-to-host data IN endpoint. */
+		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 1)
+
+		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
+		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 2)
+
+		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 3)
+
+		/** Size in bytes of the CDC data IN and OUT endpoints. */
+		#define CDC_TXRX_EPSIZE                64
+
+		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPSIZE        8
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// RNDIS CDC Control Interface
+			USB_Descriptor_Interface_t            CDC_CCI_Interface;
+			USB_CDC_Descriptor_FunctionalHeader_t CDC_Functional_Header;
+			USB_CDC_Descriptor_FunctionalACM_t    CDC_Functional_ACM;
+			USB_CDC_Descriptor_FunctionalUnion_t  CDC_Functional_Union;
+			USB_Descriptor_Endpoint_t             CDC_NotificationEndpoint;
+
+			// RNDIS CDC Data Interface
+			USB_Descriptor_Interface_t            CDC_DCI_Interface;
+			USB_Descriptor_Endpoint_t             RNDIS_DataOutEndpoint;
+			USB_Descriptor_Endpoint_t             RNDIS_DataInEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
+			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/LUFA RNDIS.inf b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/LUFA RNDIS.inf
new file mode 100644
index 000000000..f34e55f99
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/LUFA RNDIS.inf
@@ -0,0 +1,59 @@
+;     Windows LUFA RNDIS Setup File
+; Copyright (c) 2000 Microsoft Corporation
+
+[DefaultInstall]
+CopyINF="LUFA RNDIS.inf"
+
+[Version]
+Signature="$Windows NT$"
+Class=Net
+ClassGuid={4d36e972-e325-11ce-bfc1-08002be10318}
+Provider=%MFGNAME%
+DriverVer=7/1/2012,10.0.0.0
+
+[Manufacturer]
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
+
+[ControlFlags]
+ExcludeFromSelect=*
+
+[DriverInstall]
+Characteristics=0x84 ; NCF_PHYSICAL + NCF_HAS_UI
+BusType=15
+include=netrndis.inf
+needs=Usb_Rndis.ndi
+AddReg=Rndis_AddReg_Vista
+
+[DriverInstall.Services]
+include=netrndis.inf
+needs=Usb_Rndis.ndi.Services
+
+;------------------------------------------------------------------------------
+;  Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID.  Use the format as shown below.
+; Note: One INF file can be used for multiple devices with different VID and PIDs.
+; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
+
+[DeviceList.NTx86]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
+
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
+
+;------------------------------------------------------------------------------
+;  String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+MFGNAME="http://www.lufa-lib.org"
+DESCRIPTION="LUFA USB RNDIS Demo"
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.c b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.c
new file mode 100644
index 000000000..24008705c
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.c
@@ -0,0 +1,87 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Address Resolution Protocol (ARP) packet handling routines. This protocol handles the
+ *  conversion of physical MAC addresses to protocol IP addresses between the host and the
+ *  device.
+ */
+
+#include "ARP.h"
+
+/** Processes an ARP packet inside an Ethernet frame, and writes the appropriate response
+ *  to the output Ethernet frame if the host is requesting the IP or MAC address of the
+ *  virtual server device on the network.
+ *
+ *  \param[in] InDataStart    Pointer to the start of the incoming packet's ARP header
+ *  \param[out] OutDataStart  Pointer to the start of the outgoing packet's ARP header
+ *
+ *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
+ */
+int16_t ARP_ProcessARPPacket(void* InDataStart,
+                             void* OutDataStart)
+{
+	DecodeARPHeader(InDataStart);
+
+	ARP_Header_t* ARPHeaderIN  = (ARP_Header_t*)InDataStart;
+	ARP_Header_t* ARPHeaderOUT = (ARP_Header_t*)OutDataStart;
+
+	/* Ensure that the ARP request is a IPv4 request packet */
+	if ((SwapEndian_16(ARPHeaderIN->ProtocolType) == ETHERTYPE_IPV4) &&
+	    (SwapEndian_16(ARPHeaderIN->Operation) == ARP_OPERATION_REQUEST))
+	{
+		/* If the ARP packet is requesting the MAC or IP of the virtual webserver, return the response */
+		if (IP_COMPARE(&ARPHeaderIN->TPA, &ServerIPAddress) ||
+		    MAC_COMPARE(&ARPHeaderIN->THA, &ServerMACAddress))
+		{
+			/* Fill out the ARP response header */
+			ARPHeaderOUT->HardwareType = ARPHeaderIN->HardwareType;
+			ARPHeaderOUT->ProtocolType = ARPHeaderIN->ProtocolType;
+			ARPHeaderOUT->HLEN         = ARPHeaderIN->HLEN;
+			ARPHeaderOUT->PLEN         = ARPHeaderIN->PLEN;
+			ARPHeaderOUT->Operation    = SwapEndian_16(ARP_OPERATION_REPLY);
+
+			/* Copy over the sender MAC/IP to the target fields for the response */
+			ARPHeaderOUT->THA = ARPHeaderIN->SHA;
+			ARPHeaderOUT->TPA = ARPHeaderIN->SPA;
+
+			/* Copy over the new sender MAC/IP - MAC and IP addresses of the virtual webserver */
+			ARPHeaderOUT->SHA = ServerMACAddress;
+			ARPHeaderOUT->SPA = ServerIPAddress;
+
+			/* Return the size of the response so far */
+			return sizeof(ARP_Header_t);
+		}
+	}
+
+	return NO_RESPONSE;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.h
new file mode 100644
index 000000000..c809cbf44
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.h
@@ -0,0 +1,78 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for ARP.c.
+ */
+
+#ifndef _ARP_H_
+#define _ARP_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <string.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include "EthernetProtocols.h"
+		#include "Ethernet.h"
+		#include "ProtocolDecoders.h"
+
+	/* Macros: */
+		/** ARP header operation constant, indicating a request from a host for an address translation. */
+		#define ARP_OPERATION_REQUEST            1
+
+		/** ARP header operation constant, indicating a reply from a host giving an address translation. */
+		#define ARP_OPERATION_REPLY              2
+
+	/* Type Defines: */
+		/** Type define for an ARP packet inside an Ethernet frame. */
+		typedef struct
+		{
+			uint16_t      HardwareType; /**< Hardware type constant, indicating the hardware used */
+			uint16_t      ProtocolType; /**< Protocol being resolved, usually ETHERTYPE_IPV4 */
+
+			uint8_t       HLEN; /**< Length in bytes of the source/destination hardware addresses */
+			uint8_t       PLEN; /**< Length in bytes of the source/destination protocol addresses */
+			uint16_t      Operation; /**< Type of operation, either ARP_OPERATION_REQUEST or ARP_OPERATION_REPLY */
+
+			MAC_Address_t SHA; /**< Sender's hardware address */
+			IP_Address_t  SPA; /**< Sender's protocol address */
+			MAC_Address_t THA; /**< Target's hardware address */
+			IP_Address_t  TPA; /**< Target's protocol address */
+		} ARP_Header_t;
+
+	/* Function Prototypes: */
+		int16_t ARP_ProcessARPPacket(void* InDataStart,
+		                             void* OutDataStart);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.c b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.c
new file mode 100644
index 000000000..6f7b40af6
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.c
@@ -0,0 +1,129 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Dynamic Host Configuration Protocol (DHCP) packet handling routines. This protocol
+ *  handles the automatic IP negotiation to the host, so that the host will use the provided
+ *  IP address given to it by the device.
+ */
+
+#include "DHCP.h"
+
+/** Processes a DHCP packet inside an Ethernet frame, and writes the appropriate response
+ *  to the output Ethernet frame if the host is requesting or accepting an IP address.
+ *
+ *  \param[in] IPHeaderInStart      Pointer to the start of the incoming packet's IP header
+ *  \param[in] DHCPHeaderInStart    Pointer to the start of the incoming packet's DHCP header
+ *  \param[out] DHCPHeaderOutStart  Pointer to the start of the outgoing packet's DHCP header
+ *
+ *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
+ */
+int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart,
+                               void* DHCPHeaderInStart,
+                               void* DHCPHeaderOutStart)
+{
+	IP_Header_t*   IPHeaderIN    = (IP_Header_t*)IPHeaderInStart;
+	DHCP_Header_t* DHCPHeaderIN  = (DHCP_Header_t*)DHCPHeaderInStart;
+	DHCP_Header_t* DHCPHeaderOUT = (DHCP_Header_t*)DHCPHeaderOutStart;
+
+	uint8_t* DHCPOptionsINStart  = (uint8_t*)(DHCPHeaderInStart  + sizeof(DHCP_Header_t));
+	uint8_t* DHCPOptionsOUTStart = (uint8_t*)(DHCPHeaderOutStart + sizeof(DHCP_Header_t));
+
+	DecodeDHCPHeader(DHCPHeaderInStart);
+
+	/* Zero out the response DHCP packet, as much of it is legacy and left at 0 */
+	memset(DHCPHeaderOUT, 0, sizeof(DHCP_Header_t));
+
+	/* Fill out the response DHCP packet */
+	DHCPHeaderOUT->HardwareType          = DHCPHeaderIN->HardwareType;
+	DHCPHeaderOUT->Operation             = DHCP_OP_BOOTREPLY;
+	DHCPHeaderOUT->HardwareAddressLength = DHCPHeaderIN->HardwareAddressLength;
+	DHCPHeaderOUT->Hops                  = 0;
+	DHCPHeaderOUT->TransactionID         = DHCPHeaderIN->TransactionID;
+	DHCPHeaderOUT->ElapsedSeconds        = 0;
+	DHCPHeaderOUT->Flags                 = DHCPHeaderIN->Flags;
+	DHCPHeaderOUT->YourIP                = ClientIPAddress;
+	memmove(&DHCPHeaderOUT->ClientHardwareAddress, &DHCPHeaderIN->ClientHardwareAddress, sizeof(MAC_Address_t));
+	DHCPHeaderOUT->Cookie                = SwapEndian_32(DHCP_MAGIC_COOKIE);
+
+	/* Alter the incoming IP packet header so that the corrected IP source and destinations are used - this means that
+	   when the response IP header is generated, it will use the corrected addresses and not the null/broatcast addresses */
+	IPHeaderIN->SourceAddress      = ClientIPAddress;
+	IPHeaderIN->DestinationAddress = ServerIPAddress;
+
+	/* Process the incoming DHCP packet options */
+	while (DHCPOptionsINStart[0] != DHCP_OPTION_END)
+	{
+		/* Find the Message Type DHCP option, to determine the type of DHCP packet */
+		if (DHCPOptionsINStart[0] == DHCP_OPTION_MESSAGETYPE)
+		{
+			if ((DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_DISCOVER) || (DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_REQUEST))
+			{
+				/* Fill out the response DHCP packet options for a DHCP OFFER or ACK response */
+
+				*(DHCPOptionsOUTStart++) = DHCP_OPTION_MESSAGETYPE;
+				*(DHCPOptionsOUTStart++) = 1;
+				*(DHCPOptionsOUTStart++) = (DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_DISCOVER) ? DHCP_MESSAGETYPE_OFFER
+																								: DHCP_MESSAGETYPE_ACK;
+
+				*(DHCPOptionsOUTStart++) = DHCP_OPTION_SUBNETMASK;
+				*(DHCPOptionsOUTStart++) = sizeof(IP_Address_t);
+				*(DHCPOptionsOUTStart++) = 0xFF;
+				*(DHCPOptionsOUTStart++) = 0xFF;
+				*(DHCPOptionsOUTStart++) = 0xFF;
+				*(DHCPOptionsOUTStart++) = 0x00;
+
+				*(DHCPOptionsOUTStart++) = DHCP_OPTION_LEASETIME;
+				*(DHCPOptionsOUTStart++) = sizeof(uint32_t);
+				/* Lease Time 86400s (ONE_DAY) */
+				*(DHCPOptionsOUTStart++) = 0x00;
+				*(DHCPOptionsOUTStart++) = 0x01;
+				*(DHCPOptionsOUTStart++) = 0x51;
+				*(DHCPOptionsOUTStart++) = 0x80;
+
+				*(DHCPOptionsOUTStart++) = DHCP_OPTION_DHCPSERVER;
+				*(DHCPOptionsOUTStart++) = sizeof(IP_Address_t);
+				memcpy(DHCPOptionsOUTStart, &ServerIPAddress, sizeof(IP_Address_t));
+				DHCPOptionsOUTStart     += sizeof(IP_Address_t);
+
+				*(DHCPOptionsOUTStart++) = DHCP_OPTION_END;
+
+				return (sizeof(DHCP_Header_t) + 18 + sizeof(IP_Address_t));
+			}
+		}
+
+		/* Go to the next DHCP option - skip one byte if option is a padding byte, else skip the complete option's size */
+		DHCPOptionsINStart += ((DHCPOptionsINStart[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptionsINStart[1] + 2));
+	}
+
+	return NO_RESPONSE;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.h
new file mode 100644
index 000000000..5ef78469e
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.h
@@ -0,0 +1,131 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for DHCP.c.
+ */
+
+#ifndef _DHCP_H_
+#define _DHCP_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <string.h>
+
+		#include "EthernetProtocols.h"
+		#include "Ethernet.h"
+		#include "ProtocolDecoders.h"
+
+	/* Macros: */
+		/** DHCP operation constant, indicating a request from a host to a DHCP server. */
+		#define DHCP_OP_BOOTREQUEST       0x01
+
+		/** DHCP operation constant, indicating a reply from a DHCP server to a host. */
+		#define DHCP_OP_BOOTREPLY         0x02
+
+		/** Hardware type constant, indicating Ethernet as a carrier. */
+		#define DHCP_HTYPE_ETHERNET       0x01
+
+		/** Magic boot protocol "cookie", inserted into all BOOTP packets (BOOTP is the carrier of DHCP). */
+		#define DHCP_MAGIC_COOKIE         0x63825363
+
+		/** DHCP option list entry header, indicating that a subnet mask will follow. */
+		#define DHCP_OPTION_SUBNETMASK    1
+
+		/** DHCP option list entry header, indicating that the Lease Time will follow. */
+		#define DHCP_OPTION_LEASETIME     51
+
+		/** DHCP option list entry header, indicating that the DHCP message type constant will follow. */
+		#define DHCP_OPTION_MESSAGETYPE   53
+
+		/** DHCP option list entry header, indicating that the IP address of the DHCP server will follow. */
+		#define DHCP_OPTION_DHCPSERVER    54
+
+		/** DHCP option list entry header, used to pad out option data. */
+		#define DHCP_OPTION_PAD           0
+
+		/** DHCP option list entry header, indicating the end of option data. */
+		#define DHCP_OPTION_END           255
+
+		/** Message type constant, used in the DHCP option data field, requesting that a DHCP server offer an IP address. */
+		#define DHCP_MESSAGETYPE_DISCOVER 1
+
+		/** Message type constant, used in the DHCP option data field, indicating that a DHCP server is offering an IP address. */
+		#define DHCP_MESSAGETYPE_OFFER    2
+
+		/** Message type constant, used in the DHCP option data field, requesting that a DHCP server lease a given IP address. */
+		#define DHCP_MESSAGETYPE_REQUEST  3
+
+		/** Message type constant, used in the DHCP option data field, declining an offered DHCP server IP address lease. */
+		#define DHCP_MESSAGETYPE_DECLINE  4
+
+		/** Message type constant, used in the DHCP option data field, ACKing a host IP lease request. */
+		#define DHCP_MESSAGETYPE_ACK      5
+
+		/** Message type constant, used in the DHCP option data field, NACKing a host IP lease request. */
+		#define DHCP_MESSAGETYPE_NACK     6
+
+		/** Message type constant, used in the DHCP option data field, indicating that a host is releasing a leased IP address. */
+		#define DHCP_MESSAGETYPE_RELEASE  7
+
+	/* Type Defines: */
+		/** Type define for a DHCP packet inside an Ethernet frame. */
+		typedef struct
+		{
+			uint8_t  Operation; /**< DHCP operation, either DHCP_OP_BOOTREQUEST or DHCP_OP_BOOTREPLY */
+			uint8_t  HardwareType; /**< Hardware carrier type constant */
+			uint8_t  HardwareAddressLength;  /**< Length in bytes of a hardware (MAC) address on the network */
+			uint8_t  Hops; /**< Number of hops required to reach the server, unused */
+
+			uint32_t TransactionID; /**< Unique ID of the DHCP packet, for positive matching between sent and received packets */
+
+			uint16_t ElapsedSeconds; /**< Elapsed seconds since the request was made */
+			uint16_t Flags; /**< BOOTP packet flags */
+
+			IP_Address_t ClientIP; /**< Client IP address, if already leased an IP */
+			IP_Address_t YourIP; /**< Client IP address */
+			IP_Address_t NextServerIP; /**< Legacy BOOTP protocol field, unused for DHCP */
+			IP_Address_t RelayAgentIP; /**< Legacy BOOTP protocol field, unused for DHCP */
+
+			uint8_t ClientHardwareAddress[16]; /**< Hardware (MAC) address of the client making a request to the DHCP server */
+			uint8_t ServerHostnameString[64]; /**< Legacy BOOTP protocol field, unused for DHCP */
+			uint8_t BootFileName[128]; /**< Legacy BOOTP protocol field, unused for DHCP */
+
+			uint32_t Cookie; /**< Magic BOOTP protocol cookie to indicate a valid packet */
+		} DHCP_Header_t;
+
+	/* Function Prototypes: */
+		int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart,
+		                               void* DHCPHeaderInStart,
+		                               void* DHCPHeaderOutStart);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.c b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.c
new file mode 100644
index 000000000..a48de2c71
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.c
@@ -0,0 +1,136 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Ethernet frame packet handling routines. This protocol handles the processing of raw Ethernet
+ *  frames sent and received, deferring the processing of sub-packet protocols to the appropriate
+ *  protocol handlers, such as DHCP or ARP.
+ */
+
+#include "Ethernet.h"
+
+/** Ethernet Frame buffer structure, to hold the incoming Ethernet frame from the host. */
+Ethernet_Frame_Info_t FrameIN;
+
+/** Ethernet Frame buffer structure, to hold the outgoing Ethernet frame to the host. */
+Ethernet_Frame_Info_t FrameOUT;
+
+/** Constant for convenience when checking against or setting a MAC address to the virtual server MAC address. */
+const MAC_Address_t ServerMACAddress    = {SERVER_MAC_ADDRESS};
+
+/** Constant for convenience when checking against or setting an IP address to the virtual server IP address. */
+const IP_Address_t  ServerIPAddress     = {SERVER_IP_ADDRESS};
+
+/** Constant for convenience when checking against or setting a MAC address to the broadcast MAC address. */
+const MAC_Address_t BroadcastMACAddress = {BROADCAST_MAC_ADDRESS};
+
+/** Constant for convenience when checking against or setting a IP address to the broadcast IP address. */
+const IP_Address_t  BroadcastIPAddress  = {BROADCAST_IP_ADDRESS};
+
+/** Constant for convenience when checking against or setting an IP address to the client (host) IP address. */
+const IP_Address_t  ClientIPAddress     = {CLIENT_IP_ADDRESS};
+
+
+/** Processes an incoming Ethernet frame, and writes the appropriate response to the output Ethernet
+ *  frame buffer if the sub protocol handlers create a valid response.
+ */
+void Ethernet_ProcessPacket(void)
+{
+	DecodeEthernetFrameHeader(FrameIN.FrameData);
+
+	/* Cast the incoming Ethernet frame to the Ethernet header type */
+	Ethernet_Frame_Header_t* FrameINHeader  = (Ethernet_Frame_Header_t*)&FrameIN.FrameData;
+	Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT.FrameData;
+
+	int16_t                  RetSize        = NO_RESPONSE;
+
+	/* Ensure frame is addressed to either all (broadcast) or the virtual webserver, and is a type II frame */
+	if ((MAC_COMPARE(&FrameINHeader->Destination, &ServerMACAddress) ||
+	     MAC_COMPARE(&FrameINHeader->Destination, &BroadcastMACAddress)) &&
+		(SwapEndian_16(FrameIN.FrameLength) > ETHERNET_VER2_MINSIZE))
+	{
+		/* Process the packet depending on its protocol */
+		switch (SwapEndian_16(FrameINHeader->EtherType))
+		{
+			case ETHERTYPE_ARP:
+				RetSize = ARP_ProcessARPPacket(&FrameIN.FrameData[sizeof(Ethernet_Frame_Header_t)],
+				                               &FrameOUT.FrameData[sizeof(Ethernet_Frame_Header_t)]);
+				break;
+			case ETHERTYPE_IPV4:
+				RetSize = IP_ProcessIPPacket(&FrameIN.FrameData[sizeof(Ethernet_Frame_Header_t)],
+				                             &FrameOUT.FrameData[sizeof(Ethernet_Frame_Header_t)]);
+				break;
+		}
+
+		/* Protocol processing routine has filled a response, complete the ethernet frame header */
+		if (RetSize > 0)
+		{
+			/* Fill out the response Ethernet frame header */
+			FrameOUTHeader->Source          = ServerMACAddress;
+			FrameOUTHeader->Destination     = FrameINHeader->Source;
+			FrameOUTHeader->EtherType       = FrameINHeader->EtherType;
+
+			/* Set the response length in the buffer and indicate that a response is ready to be sent */
+			FrameOUT.FrameLength            = (sizeof(Ethernet_Frame_Header_t) + RetSize);
+		}
+	}
+
+	/* Check if the packet was processed */
+	if (RetSize != NO_PROCESS)
+	{
+		/* Clear the frame buffer */
+		FrameIN.FrameLength = 0;
+	}
+}
+
+/** Calculates the appropriate ethernet checksum, consisting of the addition of the one's
+ *  compliment of each word, complimented.
+ *
+ *  \param[in] Data   Pointer to the packet buffer data whose checksum must be calculated
+ *  \param[in] Bytes  Number of bytes in the data buffer to process
+ *
+ *  \return A 16-bit Ethernet checksum value
+ */
+uint16_t Ethernet_Checksum16(void* Data,
+                             uint16_t Bytes)
+{
+	uint16_t* Words    = (uint16_t*)Data;
+	uint32_t  Checksum = 0;
+
+	for (uint16_t CurrWord = 0; CurrWord < (Bytes >> 1); CurrWord++)
+	  Checksum += Words[CurrWord];
+
+	while (Checksum & 0xFFFF0000)
+	  Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16));
+
+	return ~Checksum;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h
new file mode 100644
index 000000000..8eaf64080
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h
@@ -0,0 +1,111 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Ethernet.c.
+ */
+
+#ifndef _ETHERNET_H_
+#define _ETHERNET_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <string.h>
+
+		#include "Config/AppConfig.h"
+
+		#include "EthernetProtocols.h"
+		#include "ProtocolDecoders.h"
+		#include "ICMP.h"
+		#include "TCP.h"
+		#include "UDP.h"
+		#include "DHCP.h"
+		#include "ARP.h"
+		#include "IP.h"
+
+	/* Macros: */
+		/** Physical MAC address of the network broadcast address. */
+		#define BROADCAST_MAC_ADDRESS            {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}
+
+		/** Performs a comparison between two MAC addresses, indicating if they are identical.
+		 *
+		 *  \param[in] MAC1  First MAC address
+		 *  \param[in] MAC2  Second MAC address
+		 *
+		 *  \return True if the addresses match, \c false otherwise
+		 */
+		#define MAC_COMPARE(MAC1, MAC2)          (memcmp(MAC1, MAC2, sizeof(MAC_Address_t)) == 0)
+
+		/** Maximum size of an incoming or outgoing Ethernet frame in bytes. */
+		#define ETHERNET_FRAME_SIZE_MAX          1500
+
+		/** Minimum size of an Ethernet packet in bytes, to conform to the Ethernet V2 packet standard. */
+		#define ETHERNET_VER2_MINSIZE            0x0600
+
+		/** Return value for all sub protocol handling routines, indicating that no response packet has been generated. */
+		#define NO_RESPONSE                      0
+
+		/** Return value for all sub protocol handling routines, indicating that the packet has not yet been handled. */
+		#define NO_PROCESS                       -1
+
+	/* Type Defines: */
+		/** Type define for an Ethernet frame buffer data and information structure. */
+		typedef struct
+		{
+			uint8_t  FrameData[ETHERNET_FRAME_SIZE_MAX]; /**< Ethernet frame contents. */
+			uint16_t FrameLength; /**< Length in bytes of the Ethernet frame stored in the buffer. */
+		} Ethernet_Frame_Info_t;
+
+		/** Type define for an Ethernet frame header. */
+		typedef struct
+		{
+			MAC_Address_t Destination; /**< Physical MAC address of the packet recipient */
+			MAC_Address_t Source; /**< Physics MAC address of the packet source */
+			uint16_t      EtherType; /**< Ethernet packet sub-protocol type, for Ethernet V2 packets */
+		} Ethernet_Frame_Header_t;
+
+	/* External Variables: */
+		extern Ethernet_Frame_Info_t FrameIN;
+		extern Ethernet_Frame_Info_t FrameOUT;
+
+		extern const MAC_Address_t ServerMACAddress;
+		extern const IP_Address_t  ServerIPAddress;
+		extern const MAC_Address_t BroadcastMACAddress;
+		extern const IP_Address_t  BroadcastIPAddress;
+		extern const IP_Address_t  ClientIPAddress;
+
+	/* Function Prototypes: */
+		void     Ethernet_ProcessPacket(void);
+		uint16_t Ethernet_Checksum16(void* Data,
+		                             uint16_t Bytes);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/EthernetProtocols.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/EthernetProtocols.h
new file mode 100644
index 000000000..ca738cd0d
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/EthernetProtocols.h
@@ -0,0 +1,88 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  General Ethernet protocol constants and type defines, for use by
+ *  all network protocol portions of the TCP/IP stack.
+ */
+
+#ifndef _ETHERNET_PROTOCOLS_H_
+#define _ETHERNET_PROTOCOLS_H_
+
+	/* Macros: */
+		#define ETHERTYPE_IPV4                   0x0800
+		#define ETHERTYPE_ARP                    0x0806
+		#define ETHERTYPE_RARP                   0x8035
+		#define ETHERTYPE_APPLETALK              0x809b
+		#define ETHERTYPE_APPLETALKARP           0x80f3
+		#define ETHERTYPE_IEEE8021Q              0x8100
+		#define ETHERTYPE_NOVELLIPX              0x8137
+		#define ETHERTYPE_NOVELL                 0x8138
+		#define ETHERTYPE_IPV6                   0x86DD
+		#define ETHERTYPE_COBRANET               0x8819
+		#define ETHERTYPE_PROVIDERBRIDGING       0x88a8
+		#define ETHERTYPE_MPLSUNICAST            0x8847
+		#define ETHERTYPE_MPLSMULTICAST          0x8848
+		#define ETHERTYPE_PPPoEDISCOVERY         0x8863
+		#define ETHERTYPE_PPPoESESSION           0x8864
+		#define ETHERTYPE_EAPOVERLAN             0x888E
+		#define ETHERTYPE_HYPERSCSI              0x889A
+		#define ETHERTYPE_ATAOVERETHERNET        0x88A2
+		#define ETHERTYPE_ETHERCAT               0x88A4
+		#define ETHERTYPE_SERCOSIII              0x88CD
+		#define ETHERTYPE_CESoE                  0x88D8
+		#define ETHERTYPE_MACSECURITY            0x88E5
+		#define ETHERTYPE_FIBRECHANNEL           0x8906
+		#define ETHERTYPE_QINQ                   0x9100
+		#define ETHERTYPE_VLLT                   0xCAFE
+
+		#define PROTOCOL_ICMP                    1
+		#define PROTOCOL_IGMP                    2
+		#define PROTOCOL_TCP                     6
+		#define PROTOCOL_UDP                     17
+		#define PROTOCOL_OSPF                    89
+		#define PROTOCOL_SCTP                    132
+
+	/* Type Defines: */
+		/** Type define for a physical MAC address of a device on a network. */
+		typedef struct
+		{
+			uint8_t       Octets[6]; /**< Individual bytes of a MAC address */
+		} RNDIS_MAC_Address_t;
+
+		/** Type define for a protocol IP address of a device on a network. */
+		typedef struct
+		{
+			uint8_t       Octets[4]; /**< Individual bytes of an IP address */
+		} IP_Address_t;
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.c b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.c
new file mode 100644
index 000000000..b144c4c51
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.c
@@ -0,0 +1,81 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Internet Control Message Protocol (ICMP) packet handling routines. This protocol handles
+ *  Echo requests from the host, to indicate a successful network connection between the host
+ *  and the virtual server.
+ */
+
+#include "ICMP.h"
+
+/** Processes an ICMP packet inside an Ethernet frame, and writes the appropriate response
+ *  to the output Ethernet frame if the host is issuing a ICMP ECHO request.
+ *
+ *  \param[in] InDataStart    Pointer to the start of the incoming packet's ICMP header
+ *  \param[out] OutDataStart  Pointer to the start of the outgoing packet's ICMP header
+ *
+ *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
+ */
+int16_t ICMP_ProcessICMPPacket(void* InDataStart,
+                               void* OutDataStart)
+{
+	ICMP_Header_t* ICMPHeaderIN  = (ICMP_Header_t*)InDataStart;
+	ICMP_Header_t* ICMPHeaderOUT = (ICMP_Header_t*)OutDataStart;
+
+	DecodeICMPHeader(InDataStart);
+
+	/* Determine if the ICMP packet is an echo request (ping) */
+	if (ICMPHeaderIN->Type == ICMP_TYPE_ECHOREQUEST)
+	{
+		/* Fill out the ICMP response packet */
+		ICMPHeaderOUT->Type     = ICMP_TYPE_ECHOREPLY;
+		ICMPHeaderOUT->Code     = 0;
+		ICMPHeaderOUT->Checksum = 0;
+		ICMPHeaderOUT->Id       = ICMPHeaderIN->Id;
+		ICMPHeaderOUT->Sequence = ICMPHeaderIN->Sequence;
+
+		intptr_t DataSize = FrameIN.FrameLength - ((((intptr_t)InDataStart + sizeof(ICMP_Header_t)) - (intptr_t)FrameIN.FrameData));
+
+		/* Copy the remaining payload to the response - echo requests should echo back any sent data */
+		memmove(&((uint8_t*)OutDataStart)[sizeof(ICMP_Header_t)],
+		        &((uint8_t*)InDataStart)[sizeof(ICMP_Header_t)],
+			    DataSize);
+
+		ICMPHeaderOUT->Checksum = Ethernet_Checksum16(ICMPHeaderOUT, (DataSize + sizeof(ICMP_Header_t)));
+
+		/* Return the size of the response so far */
+		return (DataSize + sizeof(ICMP_Header_t));
+	}
+
+	return NO_RESPONSE;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.h
new file mode 100644
index 000000000..e8039da3e
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.h
@@ -0,0 +1,82 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for ICMP.c.
+ */
+
+#ifndef _ICMP_H_
+#define _ICMP_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <string.h>
+
+		#include "EthernetProtocols.h"
+		#include "Ethernet.h"
+		#include "ProtocolDecoders.h"
+
+	/* Macros: */
+		/** ICMP message type constant, indicating an ICMP ECHO Reply message. */
+		#define ICMP_TYPE_ECHOREPLY              0
+
+		/** ICMP message type constant, indicating a packet destination is unreachable. */
+		#define ICMP_TYPE_DESTINATIONUNREACHABLE 3
+
+		/** ICMP message type constant, indicating an ICMP Source Quench message. */
+		#define ICMP_TYPE_SOURCEQUENCH           4
+
+		/** ICMP message type constant, indicating an ICMP Redirect message. */
+		#define ICMP_TYPE_REDIRECTMESSAGE        5
+
+		/** ICMP message type constant, indicating an ICMP ECHO Request message. */
+		#define ICMP_TYPE_ECHOREQUEST            8
+
+		/** ICMP message type constant, indicating an ICMP Time Exceeded message. */
+		#define ICMP_TYPE_TIMEEXCEEDED           11
+
+	/* Type Defines: */
+		/** Type define for an ICMP message header. */
+		typedef struct
+		{
+			uint8_t       Type; /**< ICMP message type, an \c ICMP_TYPE_* constant */
+			uint8_t       Code; /**< ICMP message code, indicating the message value */
+			uint16_t      Checksum; /**< Ethernet checksum of the ICMP message */
+			uint16_t      Id; /**< Id of the ICMP message */
+			uint16_t      Sequence; /**< Sequence number of the ICMP message, to link together message responses */
+		} ICMP_Header_t;
+
+	/* Function Prototypes: */
+		int16_t ICMP_ProcessICMPPacket(void* InDataStart,
+		                               void* OutDataStart);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.c b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.c
new file mode 100644
index 000000000..dfa583b85
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.c
@@ -0,0 +1,113 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Internet Protocol (IP) packet handling routines. This protocol handles IP packets from the
+ *  host which typically encapsulate other protocols such as ICMP, UDP and TCP.
+ */
+
+#include "IP.h"
+
+/** Processes an IP packet inside an Ethernet frame, and writes the appropriate response
+ *  to the output Ethernet frame if one is created by a sub-protocol handler.
+ *
+ *  \param[in] InDataStart    Pointer to the start of the incoming packet's IP header
+ *  \param[out] OutDataStart  Pointer to the start of the outgoing packet's IP header
+ *
+ *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE if no
+ *           response was generated, NO_PROCESS if the packet processing was deferred until the
+ *           next Ethernet packet handler iteration
+ */
+int16_t IP_ProcessIPPacket(void* InDataStart,
+                           void* OutDataStart)
+{
+	DecodeIPHeader(InDataStart);
+
+	IP_Header_t* IPHeaderIN  = (IP_Header_t*)InDataStart;
+	IP_Header_t* IPHeaderOUT = (IP_Header_t*)OutDataStart;
+
+	/* Header length is specified in number of longs in the packet header, convert to bytes */
+	uint16_t HeaderLengthBytes = (IPHeaderIN->HeaderLength * sizeof(uint32_t));
+
+	int16_t  RetSize = NO_RESPONSE;
+
+	/* Check to ensure the IP packet is addressed to the virtual webserver's IP or the broadcast IP address */
+	if (!(IP_COMPARE(&IPHeaderIN->DestinationAddress, &ServerIPAddress)) &&
+	    !(IP_COMPARE(&IPHeaderIN->DestinationAddress, &BroadcastIPAddress)))
+	{
+		return NO_RESPONSE;
+	}
+
+	/* Pass off the IP payload to the appropriate protocol processing routine */
+	switch (IPHeaderIN->Protocol)
+	{
+		case PROTOCOL_ICMP:
+			RetSize = ICMP_ProcessICMPPacket(&((uint8_t*)InDataStart)[HeaderLengthBytes],
+			                                 &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]);
+			break;
+		case PROTOCOL_TCP:
+			RetSize = TCP_ProcessTCPPacket(InDataStart,
+			                               &((uint8_t*)InDataStart)[HeaderLengthBytes],
+			                               &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]);
+			break;
+		case PROTOCOL_UDP:
+			RetSize = UDP_ProcessUDPPacket(InDataStart,
+			                               &((uint8_t*)InDataStart)[HeaderLengthBytes],
+			                               &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]);
+			break;
+	}
+
+	/* Check to see if the protocol processing routine has filled out a response */
+	if (RetSize > 0)
+	{
+		/* Fill out the response IP packet header */
+		IPHeaderOUT->TotalLength        = SwapEndian_16(sizeof(IP_Header_t) + RetSize);
+		IPHeaderOUT->TypeOfService      = 0;
+		IPHeaderOUT->HeaderLength       = (sizeof(IP_Header_t) / sizeof(uint32_t));
+		IPHeaderOUT->Version            = 4;
+		IPHeaderOUT->Flags              = 0;
+		IPHeaderOUT->FragmentOffset     = 0;
+		IPHeaderOUT->Identification     = 0;
+		IPHeaderOUT->HeaderChecksum     = 0;
+		IPHeaderOUT->Protocol           = IPHeaderIN->Protocol;
+		IPHeaderOUT->TTL                = DEFAULT_TTL;
+		IPHeaderOUT->SourceAddress      = IPHeaderIN->DestinationAddress;
+		IPHeaderOUT->DestinationAddress = IPHeaderIN->SourceAddress;
+
+		IPHeaderOUT->HeaderChecksum     = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t));
+
+		/* Return the size of the response so far */
+		return (sizeof(IP_Header_t) + RetSize);
+	}
+
+	return RetSize;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h
new file mode 100644
index 000000000..48f2c9086
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h
@@ -0,0 +1,92 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for IP.c.
+ */
+
+#ifndef _IP_H_
+#define _IP_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <string.h>
+
+		#include "EthernetProtocols.h"
+		#include "Ethernet.h"
+		#include "ProtocolDecoders.h"
+		#include "Config/AppConfig.h"
+
+	/* Macros: */
+		/** Protocol IP address of the broadcast address. */
+		#define BROADCAST_IP_ADDRESS             {0xFF, 0xFF, 0xFF, 0xFF}
+
+		/** Default Time To Live (TTL) value for sent packets, indicating the maximum allowable hops until their destination
+		 *  is reached.
+		 */
+		#define DEFAULT_TTL                      128
+
+		/** Performs a comparison between two IP addresses, indicating if they are identical.
+		 *
+		 *  \param[in] IP1  First IP address
+		 *  \param[in] IP2  Second IP address
+		 *
+		 *  \return True if the addresses match, \c false otherwise
+		 */
+		#define IP_COMPARE(IP1, IP2)             (memcmp(IP1, IP2, sizeof(IP_Address_t)) == 0)
+
+	/* Type Defines: */
+		/** Type define of an IP packet header. */
+		typedef struct
+		{
+			unsigned     HeaderLength   : 4; /**< Total length of the packet header, in 4-byte blocks */
+			unsigned     Version        : 4; /**< IP protocol version */
+			uint8_t      TypeOfService; /**< Special service type identifier, indicating delay/throughput/reliability levels */
+			uint16_t     TotalLength; /**< Total length of the IP packet, in bytes */
+
+			uint16_t     Identification; /**< Identification value for identifying fragmented packets */
+			unsigned     FragmentOffset : 13; /**< Offset of this IP fragment */
+			unsigned     Flags          : 3; /**< Fragment flags, to indicate if a packet is fragmented */
+
+			uint8_t      TTL; /**< Maximum allowable number of hops to reach the packet destination */
+			uint8_t      Protocol; /**< Encapsulated protocol type */
+			uint16_t     HeaderChecksum; /**< Ethernet checksum of the IP header */
+
+			IP_Address_t SourceAddress; /**< Source protocol IP address of the packet */
+			IP_Address_t DestinationAddress; /**< Destination protocol IP address of the packet */
+		} IP_Header_t;
+
+	/* Function Prototypes: */
+		int16_t IP_ProcessIPPacket(void* InDataStart,
+		                           void* OutDataStart);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.c b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.c
new file mode 100644
index 000000000..90d678bf4
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.c
@@ -0,0 +1,276 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/* Protocol decoders for Ethernet, TCP, IP, ICMP and ARP. Each of these routines
+   accepts a header to the appropriate protocol and prints out pertinent information
+   on the packet through the serial port.
+
+   To disable printing of a specific protocol, define the token NO_DECODE_{Protocol}
+   in the project makefile, and pass it to the compiler using the -D switch.
+*/
+
+/** \file
+ *
+ *  Protocol decoding routines, for the plain-text decoding of Ethernet frames for debugging purposes.
+ *  Enabled protocol decoders will print incoming Ethernet frame contents through the USART in a human
+ *  readable format.
+ *
+ *  Note that the USART is a slow transmission medium, and will slow down packet processing considerably.
+ *  Packet decoding routines can be disabled by defining NO_DECODE_{Protocol Name} in the project makefile
+ *  and passing it to the compiler via the -D switch.
+ */
+
+#include "ProtocolDecoders.h"
+
+/** Decodes an Ethernet frame header and prints its contents to through the USART in a human readable format.
+ *
+ *  \param[in] InDataStart  Pointer to the start of an Ethernet frame header
+ */
+void DecodeEthernetFrameHeader(void* InDataStart)
+{
+	#if !defined(NO_DECODE_ETHERNET)
+	Ethernet_Frame_Header_t* FrameHeader = (Ethernet_Frame_Header_t*)InDataStart;
+
+	printf_P(PSTR("\r\n"));
+
+	printf_P(PSTR("  ETHERNET\r\n"));
+
+	if (!(MAC_COMPARE(&FrameHeader->Destination, &ServerMACAddress)) &&
+	    !(MAC_COMPARE(&FrameHeader->Destination, &BroadcastMACAddress)))
+	{
+		printf_P(PSTR("  + NOT ADDRESSED TO DEVICE\r\n"));
+		return;
+	}
+
+	printf_P(PSTR("  + MAC Source : %02X:%02X:%02X:%02X:%02X:%02X\r\n"), FrameHeader->Source.Octets[0],
+	                                                                     FrameHeader->Source.Octets[1],
+	                                                                     FrameHeader->Source.Octets[2],
+	                                                                     FrameHeader->Source.Octets[3],
+	                                                                     FrameHeader->Source.Octets[4],
+	                                                                     FrameHeader->Source.Octets[5]);
+
+	printf_P(PSTR("  + MAC Dest: %02X:%02X:%02X:%02X:%02X:%02X\r\n"),    FrameHeader->Destination.Octets[0],
+	                                                                     FrameHeader->Destination.Octets[1],
+	                                                                     FrameHeader->Destination.Octets[2],
+	                                                                     FrameHeader->Destination.Octets[3],
+	                                                                     FrameHeader->Destination.Octets[4],
+	                                                                     FrameHeader->Destination.Octets[5]);
+
+	printf_P(PSTR("  + Protocol: 0x%04x\r\n"), SwapEndian_16(FrameHeader->EtherType));
+	#endif
+}
+
+/** Decodes an ARP header and prints its contents to through the USART in a human readable format.
+ *
+ *  \param[in] InDataStart  Pointer to the start of an ARP packet header
+ */
+void DecodeARPHeader(void* InDataStart)
+{
+	#if !defined(NO_DECODE_ARP)
+	ARP_Header_t* ARPHeader = (ARP_Header_t*)InDataStart;
+
+	printf_P(PSTR("   \\\r\n    ARP\r\n"));
+
+	if (!(IP_COMPARE(&ARPHeader->TPA, &ServerIPAddress)) &&
+	    !(MAC_COMPARE(&ARPHeader->THA, &ServerMACAddress)))
+	{
+		printf_P(PSTR("    + NOT ADDRESSED TO DEVICE\r\n"));
+		return;
+	}
+
+	printf_P(PSTR("    + Protocol: %x\r\n"), SwapEndian_16(ARPHeader->ProtocolType));
+	printf_P(PSTR("    + Operation: %u\r\n"), SwapEndian_16(ARPHeader->Operation));
+
+	if (SwapEndian_16(ARPHeader->ProtocolType) == ETHERTYPE_IPV4)
+	{
+		printf_P(PSTR("    + SHA MAC: %02X:%02X:%02X:%02X:%02X:%02X\r\n"), ARPHeader->SHA.Octets[0],
+		                                                                   ARPHeader->SHA.Octets[1],
+		                                                                   ARPHeader->SHA.Octets[2],
+		                                                                   ARPHeader->SHA.Octets[3],
+		                                                                   ARPHeader->SHA.Octets[4],
+		                                                                   ARPHeader->SHA.Octets[5]);
+
+		printf_P(PSTR("    + SPA IP: %u.%u.%u.%u\r\n"), ARPHeader->SPA.Octets[0],
+		                                                ARPHeader->SPA.Octets[1],
+		                                                ARPHeader->SPA.Octets[2],
+		                                                ARPHeader->SPA.Octets[3]);
+
+		printf_P(PSTR("    + THA MAC: %02X:%02X:%02X:%02X:%02X:%02X\r\n"), ARPHeader->THA.Octets[0],
+		                                                                   ARPHeader->THA.Octets[1],
+		                                                                   ARPHeader->THA.Octets[2],
+		                                                                   ARPHeader->THA.Octets[3],
+		                                                                   ARPHeader->THA.Octets[4],
+		                                                                   ARPHeader->THA.Octets[5]);
+
+		printf_P(PSTR("    + TPA IP: %u.%u.%u.%u\r\n"), ARPHeader->TPA.Octets[0],
+		                                                ARPHeader->TPA.Octets[1],
+		                                                ARPHeader->TPA.Octets[2],
+		                                                ARPHeader->TPA.Octets[3]);
+	}
+	#endif
+}
+
+/** Decodes an IP header and prints its contents to through the USART in a human readable format.
+ *
+ *  \param[in] InDataStart  Pointer to the start of an IP packet header
+ */
+void DecodeIPHeader(void* InDataStart)
+{
+	#if !defined(NO_DECODE_IP)
+	IP_Header_t* IPHeader  = (IP_Header_t*)InDataStart;
+
+	uint16_t HeaderLengthBytes = (IPHeader->HeaderLength * sizeof(uint32_t));
+
+	printf_P(PSTR("   \\\r\n    IP\r\n"));
+
+	if (!(IP_COMPARE(&IPHeader->DestinationAddress, &ServerIPAddress)))
+	{
+		printf_P(PSTR("    + NOT ADDRESSED TO DEVICE\r\n"));
+		return;
+	}
+
+	printf_P(PSTR("    + Header Length: %u Bytes\r\n"), HeaderLengthBytes);
+	printf_P(PSTR("    + Packet Version: %u\r\n"), IPHeader->Version);
+	printf_P(PSTR("    + Total Length: %u\r\n"), SwapEndian_16(IPHeader->TotalLength));
+
+	printf_P(PSTR("    + Protocol: %u\r\n"), IPHeader->Protocol);
+	printf_P(PSTR("    + TTL: %u\r\n"), IPHeader->TTL);
+
+	printf_P(PSTR("    + IP Src: %u.%u.%u.%u\r\n"), IPHeader->SourceAddress.Octets[0],
+	                                                IPHeader->SourceAddress.Octets[1],
+	                                                IPHeader->SourceAddress.Octets[2],
+	                                                IPHeader->SourceAddress.Octets[3]);
+
+	printf_P(PSTR("    + IP Dst: %u.%u.%u.%u\r\n"), IPHeader->DestinationAddress.Octets[0],
+	                                                IPHeader->DestinationAddress.Octets[1],
+	                                                IPHeader->DestinationAddress.Octets[2],
+	                                                IPHeader->DestinationAddress.Octets[3]);
+	#endif
+}
+
+/** Decodes an ICMP header and prints its contents to through the USART in a human readable format.
+ *
+ *  \param[in] InDataStart  Pointer to the start of an ICMP packet header
+ */
+void DecodeICMPHeader(void* InDataStart)
+{
+	#if !defined(NO_DECODE_ICMP)
+	ICMP_Header_t* ICMPHeader  = (ICMP_Header_t*)InDataStart;
+
+	printf_P(PSTR("    \\\r\n     ICMP\r\n"));
+
+	printf_P(PSTR("     + Type: %u\r\n"), ICMPHeader->Type);
+	printf_P(PSTR("     + Code: %u\r\n"), ICMPHeader->Code);
+	#endif
+}
+
+/** Decodes a TCP header and prints its contents to through the USART in a human readable format.
+ *
+ *  \param[in] InDataStart  Pointer to the start of a TCP packet header
+ */
+void DecodeTCPHeader(void* InDataStart)
+{
+	#if !defined(NO_DECODE_TCP)
+	TCP_Header_t* TCPHeader  = (TCP_Header_t*)InDataStart;
+
+	uint16_t               HeaderLengthBytes = (TCPHeader->DataOffset * sizeof(uint32_t));
+
+	printf_P(PSTR("    \\\r\n     TCP\r\n"));
+
+	printf_P(PSTR("     + Header Length: %u Bytes\r\n"), HeaderLengthBytes);
+
+	printf_P(PSTR("     + Source Port: %u\r\n"), SwapEndian_16(TCPHeader->SourcePort));
+	printf_P(PSTR("     + Destination Port: %u\r\n"), SwapEndian_16(TCPHeader->DestinationPort));
+
+	printf_P(PSTR("     + Sequence Number: %lu\r\n"), SwapEndian_32(TCPHeader->SequenceNumber));
+	printf_P(PSTR("     + Acknowledgment Number: %lu\r\n"), SwapEndian_32(TCPHeader->AcknowledgmentNumber));
+
+	printf_P(PSTR("     + Flags: 0x%02X\r\n"), TCPHeader->Flags);
+
+	if (TCP_GetPortState(TCPHeader->DestinationPort) == TCP_Port_Closed)
+	  printf_P(PSTR("     + NOT LISTENING ON DESTINATION PORT\r\n"));
+	#endif
+}
+
+/** Decodes an UDP header and prints its contents to through the USART in a human readable format.
+ *
+ *  \param[in] InDataStart  Pointer to the start of a UDP packet header
+ */
+void DecodeUDPHeader(void* InDataStart)
+{
+	#if !defined(NO_DECODE_UDP)
+	UDP_Header_t* UDPHeader = (UDP_Header_t*)InDataStart;
+
+	printf_P(PSTR("    \\\r\n     UDP\r\n"));
+
+	printf_P(PSTR("     + Source Port: %u\r\n"), SwapEndian_16(UDPHeader->SourcePort));
+	printf_P(PSTR("     + Destination Port: %u\r\n"), SwapEndian_16(UDPHeader->DestinationPort));
+
+	printf_P(PSTR("     + Data Length: %d\r\n"), SwapEndian_16(UDPHeader->Length));
+	#endif
+}
+
+/** Decodes an DHCP header and prints its contents to through the USART in a human readable format.
+ *
+ *  \param[in] InDataStart  Pointer to the start of a DHCP packet header
+ */
+void DecodeDHCPHeader(void* InDataStart)
+{
+	#if !defined(NO_DECODE_DHCP)
+	uint8_t* DHCPOptions = ((uint8_t*)InDataStart + sizeof(DHCP_Header_t));
+
+	printf_P(PSTR("     \\\r\n      DHCP\r\n"));
+
+	while (DHCPOptions[0] != DHCP_OPTION_END)
+	{
+		if (DHCPOptions[0] == DHCP_OPTION_MESSAGETYPE)
+		{
+			switch (DHCPOptions[2])
+			{
+				case DHCP_MESSAGETYPE_DISCOVER:
+					printf_P(PSTR("      + DISCOVER\r\n"));
+					break;
+				case DHCP_MESSAGETYPE_REQUEST:
+					printf_P(PSTR("      + REQUEST\r\n"));
+					break;
+				case DHCP_MESSAGETYPE_RELEASE:
+					printf_P(PSTR("      + RELEASE\r\n"));
+					break;
+				case DHCP_MESSAGETYPE_DECLINE:
+					printf_P(PSTR("      + DECLINE\r\n"));
+					break;
+			}
+		}
+
+		DHCPOptions += ((DHCPOptions[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptions[1] + 2));
+	}
+	#endif
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h
new file mode 100644
index 000000000..77a50f02f
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h
@@ -0,0 +1,60 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for ProtocolDecoders.c.
+ */
+
+#ifndef _PROTOCOL_DECODERS_H_
+#define _PROTOCOL_DECODERS_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/pgmspace.h>
+		#include <stdio.h>
+
+		#include <LUFA/Drivers/Peripheral/Serial.h>
+
+		#include "EthernetProtocols.h"
+		#include "Ethernet.h"
+		#include "Config/AppConfig.h"
+
+	/* Function Prototypes: */
+		void DecodeEthernetFrameHeader(void* InDataStart);
+		void DecodeARPHeader(void* InDataStart);
+		void DecodeIPHeader(void* InDataStart);
+		void DecodeICMPHeader(void* InDataStart);
+		void DecodeTCPHeader(void* InDataStart);
+		void DecodeUDPHeader(void* InDataStart);
+		void DecodeDHCPHeader(void* InDataStart);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.c b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.c
new file mode 100644
index 000000000..00052ed39
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.c
@@ -0,0 +1,394 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  RNDIS command handler functions. This handles RNDIS commands according to
+ *  the Microsoft RNDIS specification, creating a USB Ethernet network adapter.
+ */
+
+#define  INCLUDE_FROM_RNDIS_C
+#include "RNDIS.h"
+
+/** Physical MAC address of the network adapter, which becomes the MAC address of the host for packets sent to the adapter. */
+static const MAC_Address_t PROGMEM AdapterMACAddress     = {ADAPTER_MAC_ADDRESS};
+
+/** Vendor description of the adapter. This is overridden by the INF file required to install the appropriate RNDIS drivers for
+ *  the device, but may still be used by the OS in some circumstances.
+ */
+static const char PROGMEM AdapterVendorDescription[]     = "LUFA RNDIS Adapter";
+
+/** List of RNDIS OID commands supported by this adapter. */
+static const uint32_t PROGMEM AdapterSupportedOIDList[]  =
+							{
+								OID_GEN_SUPPORTED_LIST,
+								OID_GEN_PHYSICAL_MEDIUM,
+								OID_GEN_HARDWARE_STATUS,
+								OID_GEN_MEDIA_SUPPORTED,
+								OID_GEN_MEDIA_IN_USE,
+								OID_GEN_MAXIMUM_FRAME_SIZE,
+								OID_GEN_MAXIMUM_TOTAL_SIZE,
+								OID_GEN_LINK_SPEED,
+								OID_GEN_TRANSMIT_BLOCK_SIZE,
+								OID_GEN_RECEIVE_BLOCK_SIZE,
+								OID_GEN_VENDOR_ID,
+								OID_GEN_VENDOR_DESCRIPTION,
+								OID_GEN_CURRENT_PACKET_FILTER,
+								OID_GEN_MAXIMUM_TOTAL_SIZE,
+								OID_GEN_MEDIA_CONNECT_STATUS,
+								OID_GEN_XMIT_OK,
+								OID_GEN_RCV_OK,
+								OID_GEN_XMIT_ERROR,
+								OID_GEN_RCV_ERROR,
+								OID_GEN_RCV_NO_BUFFER,
+								OID_802_3_PERMANENT_ADDRESS,
+								OID_802_3_CURRENT_ADDRESS,
+								OID_802_3_MULTICAST_LIST,
+								OID_802_3_MAXIMUM_LIST_SIZE,
+								OID_802_3_RCV_ERROR_ALIGNMENT,
+								OID_802_3_XMIT_ONE_COLLISION,
+								OID_802_3_XMIT_MORE_COLLISIONS,
+							};
+
+/** Buffer for RNDIS messages (as distinct from Ethernet frames sent through the adapter. This must be big enough to hold the entire
+ *  Supported OID list, plus the response header. The buffer is half-duplex, and is written to as it is read to save on SRAM - for this
+ *  reason, care must be taken when constructing RNDIS responses that unread data is not overwritten when writing in responses.
+ */
+uint8_t                 RNDISMessageBuffer[sizeof(AdapterSupportedOIDList) + sizeof(RNDIS_Query_Complete_t)];
+
+/** Pointer to the RNDIS message header at the top of the RNDIS message buffer, for convenience. */
+RNDIS_Message_Header_t* MessageHeader = (RNDIS_Message_Header_t*)&RNDISMessageBuffer;
+
+/** Indicates if a RNDIS message response is ready to be sent back to the host. */
+bool                    ResponseReady               = false;
+
+/** Current RNDIS adapter state, a value from the \c RNDIS_States_t enum. */
+uint8_t                 CurrRNDISState              = RNDIS_Uninitialized;
+
+/** Current Ethernet packet filter mask. This is non-zero when the adapter is initialized, or zero when disabled. */
+uint32_t                CurrPacketFilter            = 0;
+
+
+/** Processes the RNDIS message received by the host and stored in the RNDISMessageBuffer global buffer. If a response is
+ *  created, the ResponseReady global is updated so that the response is written back to the host upon request.
+ */
+void ProcessRNDISControlMessage(void)
+{
+	/* Note: Only a single buffer is used for both the received message and its response to save SRAM. Because of
+	         this, response bytes should be filled in order so that they do not clobber unread data in the buffer. */
+
+	switch (MessageHeader->MessageType)
+	{
+		case REMOTE_NDIS_INITIALIZE_MSG:
+			/* Initialize the adapter - return information about the supported RNDIS version and buffer sizes */
+
+			ResponseReady = true;
+
+			RNDIS_Initialize_Message_t*  INITIALIZE_Message  = (RNDIS_Initialize_Message_t*)&RNDISMessageBuffer;
+			RNDIS_Initialize_Complete_t* INITIALIZE_Response = (RNDIS_Initialize_Complete_t*)&RNDISMessageBuffer;
+
+			INITIALIZE_Response->MessageType           = REMOTE_NDIS_INITIALIZE_CMPLT;
+			INITIALIZE_Response->MessageLength         = sizeof(RNDIS_Initialize_Complete_t);
+			INITIALIZE_Response->RequestId             = INITIALIZE_Message->RequestId;
+			INITIALIZE_Response->Status                = REMOTE_NDIS_STATUS_SUCCESS;
+
+			INITIALIZE_Response->MajorVersion          = REMOTE_NDIS_VERSION_MAJOR;
+			INITIALIZE_Response->MinorVersion          = REMOTE_NDIS_VERSION_MINOR;
+			INITIALIZE_Response->DeviceFlags           = REMOTE_NDIS_DF_CONNECTIONLESS;
+			INITIALIZE_Response->Medium                = REMOTE_NDIS_MEDIUM_802_3;
+			INITIALIZE_Response->MaxPacketsPerTransfer = 1;
+			INITIALIZE_Response->MaxTransferSize       = (sizeof(RNDIS_Packet_Message_t) + ETHERNET_FRAME_SIZE_MAX);
+			INITIALIZE_Response->PacketAlignmentFactor = 0;
+			INITIALIZE_Response->AFListOffset          = 0;
+			INITIALIZE_Response->AFListSize            = 0;
+
+			CurrRNDISState = RNDIS_Initialized;
+
+			break;
+		case REMOTE_NDIS_HALT_MSG:
+			/* Halt the adapter, reset the adapter state - note that no response should be returned when completed */
+
+			ResponseReady = false;
+			MessageHeader->MessageLength = 0;
+
+			CurrRNDISState = RNDIS_Uninitialized;
+
+			break;
+		case REMOTE_NDIS_QUERY_MSG:
+			/* Request for information about a parameter about the adapter, specified as an OID token */
+
+			ResponseReady = true;
+
+			RNDIS_Query_Message_t*  QUERY_Message  = (RNDIS_Query_Message_t*)&RNDISMessageBuffer;
+			RNDIS_Query_Complete_t* QUERY_Response = (RNDIS_Query_Complete_t*)&RNDISMessageBuffer;
+			uint32_t                Query_Oid      = QUERY_Message->Oid;
+
+			void*     QueryData                 = &RNDISMessageBuffer[sizeof(RNDIS_Message_Header_t) +
+			                                                          QUERY_Message->InformationBufferOffset];
+			void*     ResponseData              = &RNDISMessageBuffer[sizeof(RNDIS_Query_Complete_t)];
+			uint16_t  ResponseSize;
+
+			QUERY_Response->MessageType         = REMOTE_NDIS_QUERY_CMPLT;
+			QUERY_Response->MessageLength       = sizeof(RNDIS_Query_Complete_t);
+
+			if (ProcessNDISQuery(Query_Oid, QueryData, QUERY_Message->InformationBufferLength,
+			                     ResponseData, &ResponseSize))
+			{
+				QUERY_Response->Status                  = REMOTE_NDIS_STATUS_SUCCESS;
+				QUERY_Response->MessageLength          += ResponseSize;
+
+				QUERY_Response->InformationBufferLength = ResponseSize;
+				QUERY_Response->InformationBufferOffset = (sizeof(RNDIS_Query_Complete_t) - sizeof(RNDIS_Message_Header_t));
+			}
+			else
+			{
+				QUERY_Response->Status                  = REMOTE_NDIS_STATUS_NOT_SUPPORTED;
+
+				QUERY_Response->InformationBufferLength = 0;
+				QUERY_Response->InformationBufferOffset = 0;
+			}
+
+			break;
+		case REMOTE_NDIS_SET_MSG:
+			/* Request to set a parameter of the adapter, specified as an OID token */
+
+			ResponseReady = true;
+
+			RNDIS_Set_Message_t*  SET_Message  = (RNDIS_Set_Message_t*)&RNDISMessageBuffer;
+			RNDIS_Set_Complete_t* SET_Response = (RNDIS_Set_Complete_t*)&RNDISMessageBuffer;
+			uint32_t              SET_Oid      = SET_Message->Oid;
+
+			SET_Response->MessageType       = REMOTE_NDIS_SET_CMPLT;
+			SET_Response->MessageLength     = sizeof(RNDIS_Set_Complete_t);
+			SET_Response->RequestId         = SET_Message->RequestId;
+
+			void* SetData                   = &RNDISMessageBuffer[sizeof(RNDIS_Message_Header_t) +
+			                                                      SET_Message->InformationBufferOffset];
+
+			if (ProcessNDISSet(SET_Oid, SetData, SET_Message->InformationBufferLength))
+			  SET_Response->Status        = REMOTE_NDIS_STATUS_SUCCESS;
+			else
+			  SET_Response->Status        = REMOTE_NDIS_STATUS_NOT_SUPPORTED;
+
+			break;
+		case REMOTE_NDIS_RESET_MSG:
+			/* Soft reset the adapter */
+
+			ResponseReady = true;
+
+			RNDIS_Reset_Complete_t* RESET_Response = (RNDIS_Reset_Complete_t*)&RNDISMessageBuffer;
+
+			RESET_Response->MessageType         = REMOTE_NDIS_RESET_CMPLT;
+			RESET_Response->MessageLength       = sizeof(RNDIS_Reset_Complete_t);
+			RESET_Response->Status              = REMOTE_NDIS_STATUS_SUCCESS;
+			RESET_Response->AddressingReset     = 0;
+
+			break;
+		case REMOTE_NDIS_KEEPALIVE_MSG:
+			/* Keep alive message sent to the adapter every 5 seconds when idle to ensure it is still responding */
+
+			ResponseReady = true;
+
+			RNDIS_KeepAlive_Message_t*  KEEPALIVE_Message  = (RNDIS_KeepAlive_Message_t*)&RNDISMessageBuffer;
+			RNDIS_KeepAlive_Complete_t* KEEPALIVE_Response = (RNDIS_KeepAlive_Complete_t*)&RNDISMessageBuffer;
+
+			KEEPALIVE_Response->MessageType     = REMOTE_NDIS_KEEPALIVE_CMPLT;
+			KEEPALIVE_Response->MessageLength   = sizeof(RNDIS_KeepAlive_Complete_t);
+			KEEPALIVE_Response->RequestId       = KEEPALIVE_Message->RequestId;
+			KEEPALIVE_Response->Status          = REMOTE_NDIS_STATUS_SUCCESS;
+
+			break;
+	}
+}
+
+/** Processes RNDIS query commands, retrieving information from the adapter and reporting it back to the host. The requested
+ *  parameter is given as an OID value.
+ *
+ *  \param[in] OId            OId value of the parameter being queried
+ *  \param[in] QueryData      Pointer to any extra query data being sent by the host to the device inside the RNDIS message buffer
+ *  \param[in] QuerySize      Size in bytes of the extra query data being sent by the host
+ *  \param[out] ResponseData  Pointer to the start of the query response inside the RNDIS message buffer
+ *  \param[out] ResponseSize  Pointer to the size in bytes of the response data being sent to the host
+ *
+ *  \return Boolean \c true if the query was handled, \c false otherwise
+ */
+static bool ProcessNDISQuery(const uint32_t OId, void* QueryData, uint16_t QuerySize,
+                             void* ResponseData, uint16_t* ResponseSize)
+{
+	/* Handler for REMOTE_NDIS_QUERY_MSG messages */
+
+	switch (OId)
+	{
+		case OID_GEN_SUPPORTED_LIST:
+			*ResponseSize = sizeof(AdapterSupportedOIDList);
+
+			/* Copy the list of supported NDIS OID tokens to the response buffer */
+			memcpy_P(ResponseData, AdapterSupportedOIDList, sizeof(AdapterSupportedOIDList));
+
+			return true;
+		case OID_GEN_PHYSICAL_MEDIUM:
+			*ResponseSize = sizeof(uint32_t);
+
+			/* Indicate that the device is a true ethernet link */
+			*((uint32_t*)ResponseData) = 0;
+
+			return true;
+		case OID_GEN_HARDWARE_STATUS:
+			*ResponseSize = sizeof(uint32_t);
+
+			/* Always indicate hardware ready */
+			*((uint32_t*)ResponseData) = NDIS_HardwareStatus_Ready;
+
+			return true;
+		case OID_GEN_MEDIA_SUPPORTED:
+		case OID_GEN_MEDIA_IN_USE:
+			*ResponseSize = sizeof(uint32_t);
+
+			/* Indicate 802.3 (Ethernet) supported by the adapter */
+			*((uint32_t*)ResponseData) = REMOTE_NDIS_MEDIUM_802_3;
+
+			return true;
+		case OID_GEN_VENDOR_ID:
+			*ResponseSize = sizeof(uint32_t);
+
+			/* Vendor ID 0x0xFFFFFF is reserved for vendors who have not purchased a NDIS VID */
+			*((uint32_t*)ResponseData) = 0x00FFFFFF;
+
+			return true;
+		case OID_GEN_MAXIMUM_FRAME_SIZE:
+		case OID_GEN_TRANSMIT_BLOCK_SIZE:
+		case OID_GEN_RECEIVE_BLOCK_SIZE:
+			*ResponseSize = sizeof(uint32_t);
+
+			/* Indicate that the maximum frame size is the size of the ethernet frame buffer */
+			*((uint32_t*)ResponseData) = ETHERNET_FRAME_SIZE_MAX;
+
+			return true;
+		case OID_GEN_VENDOR_DESCRIPTION:
+			*ResponseSize = sizeof(AdapterVendorDescription);
+
+			/* Copy vendor description string to the response buffer */
+			memcpy_P(ResponseData, AdapterVendorDescription, sizeof(AdapterVendorDescription));
+
+			return true;
+		case OID_GEN_MEDIA_CONNECT_STATUS:
+			*ResponseSize = sizeof(uint32_t);
+
+			/* Always indicate that the adapter is connected to a network */
+			*((uint32_t*)ResponseData) = REMOTE_NDIS_MEDIA_STATE_CONNECTED;
+
+			return true;
+		case OID_GEN_LINK_SPEED:
+			*ResponseSize = sizeof(uint32_t);
+
+			/* Indicate 10Mb/s link speed */
+			*((uint32_t*)ResponseData) = 100000;
+
+			return true;
+		case OID_802_3_PERMANENT_ADDRESS:
+		case OID_802_3_CURRENT_ADDRESS:
+			*ResponseSize = sizeof(MAC_Address_t);
+
+			/* Copy over the fixed adapter MAC to the response buffer */
+			memcpy_P(ResponseData, &AdapterMACAddress, sizeof(MAC_Address_t));
+
+			return true;
+		case OID_802_3_MAXIMUM_LIST_SIZE:
+			*ResponseSize = sizeof(uint32_t);
+
+			/* Indicate only one multicast address supported */
+			*((uint32_t*)ResponseData) = 1;
+
+			return true;
+		case OID_GEN_CURRENT_PACKET_FILTER:
+			*ResponseSize = sizeof(uint32_t);
+
+			/* Indicate the current packet filter mask */
+			*((uint32_t*)ResponseData) = CurrPacketFilter;
+
+			return true;
+		case OID_GEN_XMIT_OK:
+		case OID_GEN_RCV_OK:
+		case OID_GEN_XMIT_ERROR:
+		case OID_GEN_RCV_ERROR:
+		case OID_GEN_RCV_NO_BUFFER:
+		case OID_802_3_RCV_ERROR_ALIGNMENT:
+		case OID_802_3_XMIT_ONE_COLLISION:
+		case OID_802_3_XMIT_MORE_COLLISIONS:
+			*ResponseSize = sizeof(uint32_t);
+
+			/* Unused statistic OIDs - always return 0 for each */
+			*((uint32_t*)ResponseData) = 0;
+
+			return true;
+		case OID_GEN_MAXIMUM_TOTAL_SIZE:
+			*ResponseSize = sizeof(uint32_t);
+
+			/* Indicate maximum overall buffer (Ethernet frame and RNDIS header) the adapter can handle */
+			*((uint32_t*)ResponseData) = (sizeof(RNDISMessageBuffer) + ETHERNET_FRAME_SIZE_MAX);
+
+			return true;
+		default:
+			return false;
+	}
+}
+
+/** Processes RNDIS set commands, setting adapter parameters to values given by the host. The requested parameter is given
+ *  as an OID value.
+ *
+ *  \param[in] OId      OId value of the parameter being set
+ *  \param[in] SetData  Pointer to the parameter value in the RNDIS message buffer
+ *  \param[in] SetSize  Size in bytes of the parameter value being sent by the host
+ *
+ *  \return Boolean \c true if the set was handled, \c false otherwise
+ */
+static bool ProcessNDISSet(uint32_t OId, void* SetData, uint16_t SetSize)
+{
+	/* Handler for REMOTE_NDIS_SET_MSG messages */
+
+	switch (OId)
+	{
+		case OID_GEN_CURRENT_PACKET_FILTER:
+			/* Save the packet filter mask in case the host queries it again later */
+			CurrPacketFilter = *((uint32_t*)SetData);
+
+			/* Set the RNDIS state to initialized if the packet filter is non-zero */
+			CurrRNDISState = ((CurrPacketFilter) ? RNDIS_Data_Initialized : RNDIS_Initialized);
+
+			return true;
+		case OID_802_3_MULTICAST_LIST:
+			/* Do nothing - throw away the value from the host as it is unused */
+
+			return true;
+		default:
+			return false;
+	}
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h
new file mode 100644
index 000000000..bea97f79d
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h
@@ -0,0 +1,67 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for RNDIS.c.
+ */
+
+#ifndef _RNDIS_H_
+#define _RNDIS_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <stdbool.h>
+
+		#include "../RNDISEthernet.h"
+		#include "Ethernet.h"
+
+	/* External Variables: */
+		extern uint8_t                 RNDISMessageBuffer[];
+		extern RNDIS_Message_Header_t* MessageHeader;
+		extern bool                    ResponseReady;
+		extern uint8_t                 CurrRNDISState;
+
+	/* Function Prototypes: */
+		void ProcessRNDISControlMessage(void);
+
+		#if defined(INCLUDE_FROM_RNDIS_C)
+			static bool ProcessNDISQuery(const uint32_t OId,
+			                             void* QueryData,
+			                             uint16_t QuerySize,
+			                             void* ResponseData,
+			                             uint16_t* ResponseSize);
+			static bool ProcessNDISSet(const uint32_t OId,
+			                           void* SetData,
+			                           uint16_t SetSize);
+		#endif
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.c b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.c
new file mode 100644
index 000000000..a6f1f6adf
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.c
@@ -0,0 +1,631 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Transmission Control Protocol (TCP) packet handling routines. This protocol handles the reliable in-order transmission
+ *  and reception of packets to and from devices on a network, to "ports" on the device. It is used in situations where data
+ *  delivery must be reliable and correct, e.g. HTTP, TELNET and most other non-streaming protocols.
+ */
+
+#define  INCLUDE_FROM_TCP_C
+#include "TCP.h"
+
+/** Port state table array. This contains the current status of TCP ports in the device. To save on space, only open ports are
+ *  stored - closed ports may be overwritten at any time, and the system will assume any ports not present in the array are closed. This
+ *  allows for MAX_OPEN_TCP_PORTS to be less than the number of ports used by the application if desired.
+ */
+TCP_PortState_t        PortStateTable[MAX_OPEN_TCP_PORTS];
+
+/** Connection state table array. This contains the current status of TCP connections in the device. To save on space, only active
+ *  (non-closed) connections are stored - closed connections may be overwritten at any time, and the system will assume any connections
+ *  not present in the array are closed.
+ */
+TCP_ConnectionState_t  ConnectionStateTable[MAX_TCP_CONNECTIONS];
+
+
+/** Task to handle the calling of each registered application's callback function, to process and generate TCP packets at the application
+ *  level. If an application produces a response, this task constructs the appropriate Ethernet frame and places it into the Ethernet OUT
+ *  buffer for later transmission.
+ */
+void TCP_Task(void)
+{
+	/* Run each application in sequence, to process incoming and generate outgoing packets */
+	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
+	{
+		/* Find the corresponding port entry in the port table */
+		for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
+		{
+			/* Run the application handler for the port */
+			if ((PortStateTable[PTableEntry].Port  == ConnectionStateTable[CSTableEntry].Port) &&
+			    (PortStateTable[PTableEntry].State == TCP_Port_Open))
+			{
+				PortStateTable[PTableEntry].ApplicationHandler(&ConnectionStateTable[CSTableEntry],
+				                                               &ConnectionStateTable[CSTableEntry].Info.Buffer);
+			}
+		}
+	}
+
+	/* Bail out early if there is already a frame waiting to be sent in the Ethernet OUT buffer */
+	if (FrameOUT.FrameLength)
+	  return;
+
+	/* Send response packets from each application as the TCP packet buffers are filled by the applications */
+	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
+	{
+		/* For each completely received packet, pass it along to the listening application */
+		if ((ConnectionStateTable[CSTableEntry].Info.Buffer.Direction == TCP_PACKETDIR_OUT) &&
+		    (ConnectionStateTable[CSTableEntry].Info.Buffer.Ready))
+		{
+			Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT.FrameData;
+			IP_Header_t*             IPHeaderOUT    = (IP_Header_t*)&FrameOUT.FrameData[sizeof(Ethernet_Frame_Header_t)];
+			TCP_Header_t*            TCPHeaderOUT   = (TCP_Header_t*)&FrameOUT.FrameData[sizeof(Ethernet_Frame_Header_t) +
+			                                                                             sizeof(IP_Header_t)];
+			void*                    TCPDataOUT     = &FrameOUT.FrameData[sizeof(Ethernet_Frame_Header_t) +
+			                                                              sizeof(IP_Header_t) +
+			                                                              sizeof(TCP_Header_t)];
+
+			uint16_t PacketSize = ConnectionStateTable[CSTableEntry].Info.Buffer.Length;
+
+			/* Fill out the TCP data */
+			TCPHeaderOUT->SourcePort           = ConnectionStateTable[CSTableEntry].Port;
+			TCPHeaderOUT->DestinationPort      = ConnectionStateTable[CSTableEntry].RemotePort;
+			TCPHeaderOUT->SequenceNumber       = SwapEndian_32(ConnectionStateTable[CSTableEntry].Info.SequenceNumberOut);
+			TCPHeaderOUT->AcknowledgmentNumber = SwapEndian_32(ConnectionStateTable[CSTableEntry].Info.SequenceNumberIn);
+			TCPHeaderOUT->DataOffset           = (sizeof(TCP_Header_t) / sizeof(uint32_t));
+			TCPHeaderOUT->WindowSize           = SwapEndian_16(TCP_WINDOW_SIZE);
+
+			TCPHeaderOUT->Flags                = TCP_FLAG_ACK;
+			TCPHeaderOUT->UrgentPointer        = 0;
+			TCPHeaderOUT->Checksum             = 0;
+			TCPHeaderOUT->Reserved             = 0;
+
+			memcpy(TCPDataOUT, ConnectionStateTable[CSTableEntry].Info.Buffer.Data, PacketSize);
+
+			ConnectionStateTable[CSTableEntry].Info.SequenceNumberOut += PacketSize;
+
+			TCPHeaderOUT->Checksum             = TCP_Checksum16(TCPHeaderOUT, &ServerIPAddress,
+			                                                    &ConnectionStateTable[CSTableEntry].RemoteAddress,
+			                                                    (sizeof(TCP_Header_t) + PacketSize));
+
+			PacketSize += sizeof(TCP_Header_t);
+
+			/* Fill out the response IP header */
+			IPHeaderOUT->TotalLength        = SwapEndian_16(sizeof(IP_Header_t) + PacketSize);
+			IPHeaderOUT->TypeOfService      = 0;
+			IPHeaderOUT->HeaderLength       = (sizeof(IP_Header_t) / sizeof(uint32_t));
+			IPHeaderOUT->Version            = 4;
+			IPHeaderOUT->Flags              = 0;
+			IPHeaderOUT->FragmentOffset     = 0;
+			IPHeaderOUT->Identification     = 0;
+			IPHeaderOUT->HeaderChecksum     = 0;
+			IPHeaderOUT->Protocol           = PROTOCOL_TCP;
+			IPHeaderOUT->TTL                = DEFAULT_TTL;
+			IPHeaderOUT->SourceAddress      = ServerIPAddress;
+			IPHeaderOUT->DestinationAddress = ConnectionStateTable[CSTableEntry].RemoteAddress;
+
+			IPHeaderOUT->HeaderChecksum     = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t));
+
+			PacketSize += sizeof(IP_Header_t);
+
+			/* Fill out the response Ethernet frame header */
+			FrameOUTHeader->Source          = ServerMACAddress;
+			FrameOUTHeader->Destination     = (MAC_Address_t){{0x02, 0x00, 0x02, 0x00, 0x02, 0x00}};
+			FrameOUTHeader->EtherType       = SwapEndian_16(ETHERTYPE_IPV4);
+
+			PacketSize += sizeof(Ethernet_Frame_Header_t);
+
+			/* Set the response length in the buffer and indicate that a response is ready to be sent */
+			FrameOUT.FrameLength            = PacketSize;
+
+			ConnectionStateTable[CSTableEntry].Info.Buffer.Ready = false;
+
+			break;
+		}
+	}
+}
+
+/** Initializes the TCP protocol handler, clearing the port and connection state tables. This must be called before TCP packets are
+ *  processed.
+ */
+void TCP_Init(void)
+{
+	/* Initialize the port state table with all CLOSED entries */
+	for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
+	  PortStateTable[PTableEntry].State = TCP_Port_Closed;
+
+	/* Initialize the connection table with all CLOSED entries */
+	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
+	  ConnectionStateTable[CSTableEntry].State = TCP_Connection_Closed;
+}
+
+/** Sets the state and callback handler of the given port, specified in big endian to the given state.
+ *
+ *  \param[in] Port     Port whose state and callback function to set, specified in big endian
+ *  \param[in] State    New state of the port, a value from the \ref TCP_PortStates_t enum
+ *  \param[in] Handler  Application callback handler for the port
+ *
+ *  \return Boolean \c true if the port state was set, \c false otherwise (no more space in the port state table)
+ */
+bool TCP_SetPortState(const uint16_t Port,
+                      const uint8_t State,
+                      void (*Handler)(TCP_ConnectionState_t*, TCP_ConnectionBuffer_t*))
+{
+	/* Note, Port number should be specified in BIG endian to simplify network code */
+
+	/* Check to see if the port entry is already in the port state table */
+	for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
+	{
+		/* Find existing entry for the port in the table, update it if found */
+		if (PortStateTable[PTableEntry].Port == Port)
+		{
+			PortStateTable[PTableEntry].State = State;
+			PortStateTable[PTableEntry].ApplicationHandler = Handler;
+			return true;
+		}
+	}
+
+	/* Check if trying to open the port -- if so we need to find an unused (closed) entry and replace it */
+	if (State == TCP_Port_Open)
+	{
+		for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
+		{
+			/* Find a closed port entry in the table, change it to the given port and state */
+			if (PortStateTable[PTableEntry].State == TCP_Port_Closed)
+			{
+				PortStateTable[PTableEntry].Port  = Port;
+				PortStateTable[PTableEntry].State = State;
+				PortStateTable[PTableEntry].ApplicationHandler = Handler;
+				return true;
+			}
+		}
+
+		/* Port not in table and no room to add it, return failure */
+		return false;
+	}
+	else
+	{
+		/* Port not in table but trying to close it, so operation successful */
+		return true;
+	}
+}
+
+/** Retrieves the current state of a given TCP port, specified in big endian.
+ *
+ *  \param[in] Port  TCP port whose state is to be retrieved, given in big-endian
+ *
+ *  \return A value from the \ref TCP_PortStates_t enum
+ */
+uint8_t TCP_GetPortState(const uint16_t Port)
+{
+	/* Note, Port number should be specified in BIG endian to simplify network code */
+
+	for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
+	{
+		/* Find existing entry for the port in the table, return the port status if found */
+		if (PortStateTable[PTableEntry].Port == Port)
+		  return PortStateTable[PTableEntry].State;
+	}
+
+	/* Port not in table, assume closed */
+	return TCP_Port_Closed;
+}
+
+/** Sets the connection state of the given port, remote address and remote port to the given TCP connection state. If the
+ *  connection exists in the connection state table it is updated, otherwise it is created if possible.
+ *
+ *  \param[in] Port           TCP port of the connection on the device, specified in big endian
+ *  \param[in] RemoteAddress  Remote protocol IP address of the connected device
+ *  \param[in] RemotePort     TCP port of the remote device in the connection, specified in big endian
+ *  \param[in] State          TCP connection state, a value from the \ref TCP_ConnectionStates_t enum
+ *
+ *  \return Boolean \c true if the connection was updated or created, \c false otherwise (no more space in the connection state table)
+ */
+bool TCP_SetConnectionState(const uint16_t Port,
+                            const IP_Address_t* RemoteAddress,
+                            const uint16_t RemotePort,
+                            const uint8_t State)
+{
+	/* Note, Port number should be specified in BIG endian to simplify network code */
+
+	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
+	{
+		/* Find port entry in the table */
+		if ((ConnectionStateTable[CSTableEntry].Port == Port) &&
+		     IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) &&
+			 ConnectionStateTable[CSTableEntry].RemotePort == RemotePort)
+		{
+			ConnectionStateTable[CSTableEntry].State = State;
+			return true;
+		}
+	}
+
+	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
+	{
+		/* Find empty entry in the table */
+		if (ConnectionStateTable[CSTableEntry].State == TCP_Connection_Closed)
+		{
+			ConnectionStateTable[CSTableEntry].Port          = Port;
+			ConnectionStateTable[CSTableEntry].RemoteAddress = *RemoteAddress;
+			ConnectionStateTable[CSTableEntry].RemotePort    = RemotePort;
+			ConnectionStateTable[CSTableEntry].State         = State;
+			return true;
+		}
+	}
+
+	return false;
+}
+
+/** Retrieves the current state of a given TCP connection to a host.
+ *
+ *  \param[in] Port           TCP port on the device in the connection, specified in big endian
+ *  \param[in] RemoteAddress  Remote protocol IP address of the connected host
+ *  \param[in] RemotePort     Remote TCP port of the connected host, specified in big endian
+ *
+ *  \return A value from the \ref TCP_ConnectionStates_t enum
+ */
+uint8_t TCP_GetConnectionState(const uint16_t Port,
+                               const IP_Address_t* RemoteAddress,
+                               const uint16_t RemotePort)
+{
+	/* Note, Port number should be specified in BIG endian to simplify network code */
+
+	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
+	{
+		/* Find port entry in the table */
+		if ((ConnectionStateTable[CSTableEntry].Port == Port) &&
+		     IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) &&
+			 ConnectionStateTable[CSTableEntry].RemotePort == RemotePort)
+
+		{
+			return ConnectionStateTable[CSTableEntry].State;
+		}
+	}
+
+	return TCP_Connection_Closed;
+}
+
+/** Retrieves the connection info structure of a given connection to a host.
+ *
+ *  \param[in] Port           TCP port on the device in the connection, specified in big endian
+ *  \param[in] RemoteAddress  Remote protocol IP address of the connected host
+ *  \param[in] RemotePort     Remote TCP port of the connected host, specified in big endian
+ *
+ *  \return ConnectionInfo structure of the connection if found, NULL otherwise
+ */
+TCP_ConnectionInfo_t* TCP_GetConnectionInfo(const uint16_t Port,
+                                            const IP_Address_t* RemoteAddress,
+                                            const uint16_t RemotePort)
+{
+	/* Note, Port number should be specified in BIG endian to simplify network code */
+
+	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
+	{
+		/* Find port entry in the table */
+		if ((ConnectionStateTable[CSTableEntry].Port == Port) &&
+		     IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) &&
+			 ConnectionStateTable[CSTableEntry].RemotePort == RemotePort)
+		{
+			return &ConnectionStateTable[CSTableEntry].Info;
+		}
+	}
+
+	return NULL;
+}
+
+/** Processes a TCP packet inside an Ethernet frame, and writes the appropriate response
+ *  to the output Ethernet frame if one is created by a application handler.
+ *
+ *  \param[in] IPHeaderInStart     Pointer to the start of the incoming packet's IP header
+ *  \param[in] TCPHeaderInStart    Pointer to the start of the incoming packet's TCP header
+ *  \param[out] TCPHeaderOutStart  Pointer to the start of the outgoing packet's TCP header
+ *
+ *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE if no
+ *           response was generated, NO_PROCESS if the packet processing was deferred until the
+ *           next Ethernet packet handler iteration
+ */
+int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart,
+                             void* TCPHeaderInStart,
+                             void* TCPHeaderOutStart)
+{
+	IP_Header_t*  IPHeaderIN   = (IP_Header_t*)IPHeaderInStart;
+	TCP_Header_t* TCPHeaderIN  = (TCP_Header_t*)TCPHeaderInStart;
+	TCP_Header_t* TCPHeaderOUT = (TCP_Header_t*)TCPHeaderOutStart;
+
+	TCP_ConnectionInfo_t* ConnectionInfo;
+
+	DecodeTCPHeader(TCPHeaderInStart);
+
+	bool PacketResponse = false;
+
+	/* Check if the destination port is open and allows incoming connections */
+	if (TCP_GetPortState(TCPHeaderIN->DestinationPort) == TCP_Port_Open)
+	{
+		/* Detect SYN from host to start a connection */
+		if (TCPHeaderIN->Flags & TCP_FLAG_SYN)
+		  TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Listen);
+
+		/* Detect RST from host to abort existing connection */
+		if (TCPHeaderIN->Flags & TCP_FLAG_RST)
+		{
+			if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+			                           TCPHeaderIN->SourcePort, TCP_Connection_Closed))
+			{
+				TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK);
+				PacketResponse = true;
+			}
+		}
+		else
+		{
+			/* Process the incoming TCP packet based on the current connection state for the sender and port */
+			switch (TCP_GetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort))
+			{
+				case TCP_Connection_Listen:
+					if (TCPHeaderIN->Flags == TCP_FLAG_SYN)
+					{
+						/* SYN connection starts a connection with a peer */
+						if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+						                           TCPHeaderIN->SourcePort, TCP_Connection_SYNReceived))
+						{
+							TCPHeaderOUT->Flags = (TCP_FLAG_SYN | TCP_FLAG_ACK);
+
+							ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort);
+
+							ConnectionInfo->SequenceNumberIn  = (SwapEndian_32(TCPHeaderIN->SequenceNumber) + 1);
+							ConnectionInfo->SequenceNumberOut = 0;
+							ConnectionInfo->Buffer.InUse      = false;
+						}
+						else
+						{
+							TCPHeaderOUT->Flags = TCP_FLAG_RST;
+						}
+
+						PacketResponse      = true;
+					}
+
+					break;
+				case TCP_Connection_SYNReceived:
+					if (TCPHeaderIN->Flags == TCP_FLAG_ACK)
+					{
+						/* ACK during the connection process completes the connection to a peer */
+
+						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+											   TCPHeaderIN->SourcePort, TCP_Connection_Established);
+
+						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+															   TCPHeaderIN->SourcePort);
+
+						ConnectionInfo->SequenceNumberOut++;
+					}
+
+					break;
+				case TCP_Connection_Established:
+					if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK))
+					{
+						/* FIN ACK when connected to a peer starts the finalization process */
+
+						TCPHeaderOUT->Flags = (TCP_FLAG_FIN | TCP_FLAG_ACK);
+						PacketResponse      = true;
+
+						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+											   TCPHeaderIN->SourcePort, TCP_Connection_CloseWait);
+
+						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+															   TCPHeaderIN->SourcePort);
+
+						ConnectionInfo->SequenceNumberIn++;
+						ConnectionInfo->SequenceNumberOut++;
+					}
+					else if ((TCPHeaderIN->Flags == TCP_FLAG_ACK) || (TCPHeaderIN->Flags == (TCP_FLAG_ACK | TCP_FLAG_PSH)))
+					{
+						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+															   TCPHeaderIN->SourcePort);
+
+						/* Check if the buffer is currently in use either by a buffered data to send, or receive */
+						if ((ConnectionInfo->Buffer.InUse == false) && (ConnectionInfo->Buffer.Ready == false))
+						{
+							ConnectionInfo->Buffer.Direction = TCP_PACKETDIR_IN;
+							ConnectionInfo->Buffer.InUse     = true;
+							ConnectionInfo->Buffer.Length    = 0;
+						}
+
+						/* Check if the buffer has been claimed by us to read in data from the peer */
+						if ((ConnectionInfo->Buffer.Direction == TCP_PACKETDIR_IN) &&
+							(ConnectionInfo->Buffer.Length != TCP_WINDOW_SIZE))
+						{
+							uint16_t IPOffset   = (IPHeaderIN->HeaderLength * sizeof(uint32_t));
+							uint16_t TCPOffset  = (TCPHeaderIN->DataOffset * sizeof(uint32_t));
+							uint16_t DataLength = (SwapEndian_16(IPHeaderIN->TotalLength) - IPOffset - TCPOffset);
+
+							/* Copy the packet data into the buffer */
+							memcpy(&ConnectionInfo->Buffer.Data[ConnectionInfo->Buffer.Length],
+								   &((uint8_t*)TCPHeaderInStart)[TCPOffset],
+								   DataLength);
+
+							ConnectionInfo->SequenceNumberIn += DataLength;
+							ConnectionInfo->Buffer.Length    += DataLength;
+
+							/* Check if the buffer is full or if the PSH flag is set, if so indicate buffer ready */
+							if ((!(TCP_WINDOW_SIZE - ConnectionInfo->Buffer.Length)) || (TCPHeaderIN->Flags & TCP_FLAG_PSH))
+							{
+								ConnectionInfo->Buffer.InUse = false;
+								ConnectionInfo->Buffer.Ready = true;
+
+								TCPHeaderOUT->Flags = TCP_FLAG_ACK;
+								PacketResponse      = true;
+							}
+						}
+						else
+						{
+							/* Buffer is currently in use by the application, defer processing of the incoming packet */
+							return NO_PROCESS;
+						}
+					}
+
+					break;
+				case TCP_Connection_Closing:
+						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+															   TCPHeaderIN->SourcePort);
+
+						TCPHeaderOUT->Flags = (TCP_FLAG_ACK | TCP_FLAG_FIN);
+						PacketResponse      = true;
+
+						ConnectionInfo->Buffer.InUse = false;
+
+						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+											   TCPHeaderIN->SourcePort, TCP_Connection_FINWait1);
+
+					break;
+				case TCP_Connection_FINWait1:
+					if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK))
+					{
+						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+															   TCPHeaderIN->SourcePort);
+
+						TCPHeaderOUT->Flags = TCP_FLAG_ACK;
+						PacketResponse      = true;
+
+						ConnectionInfo->SequenceNumberIn++;
+						ConnectionInfo->SequenceNumberOut++;
+
+						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+											   TCPHeaderIN->SourcePort, TCP_Connection_Closed);
+					}
+					else if (TCPHeaderIN->Flags == TCP_FLAG_ACK)
+					{
+						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+											   TCPHeaderIN->SourcePort, TCP_Connection_FINWait2);
+					}
+
+					break;
+				case TCP_Connection_FINWait2:
+					if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK))
+					{
+						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+															   TCPHeaderIN->SourcePort);
+
+						TCPHeaderOUT->Flags = TCP_FLAG_ACK;
+						PacketResponse      = true;
+
+						ConnectionInfo->SequenceNumberIn++;
+						ConnectionInfo->SequenceNumberOut++;
+
+						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+											   TCPHeaderIN->SourcePort, TCP_Connection_Closed);
+					}
+
+					break;
+				case TCP_Connection_CloseWait:
+					if (TCPHeaderIN->Flags == TCP_FLAG_ACK)
+					{
+						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+											   TCPHeaderIN->SourcePort, TCP_Connection_Closed);
+					}
+
+					break;
+			}
+		}
+	}
+	else
+	{
+		/* Port is not open, indicate via a RST/ACK response to the sender */
+		TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK);
+		PacketResponse      = true;
+	}
+
+	/* Check if we need to respond to the sent packet */
+	if (PacketResponse)
+	{
+		ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
+		                                       TCPHeaderIN->SourcePort);
+
+		TCPHeaderOUT->SourcePort           = TCPHeaderIN->DestinationPort;
+		TCPHeaderOUT->DestinationPort      = TCPHeaderIN->SourcePort;
+		TCPHeaderOUT->SequenceNumber       = SwapEndian_32(ConnectionInfo->SequenceNumberOut);
+		TCPHeaderOUT->AcknowledgmentNumber = SwapEndian_32(ConnectionInfo->SequenceNumberIn);
+		TCPHeaderOUT->DataOffset           = (sizeof(TCP_Header_t) / sizeof(uint32_t));
+
+		if (!(ConnectionInfo->Buffer.InUse))
+		  TCPHeaderOUT->WindowSize         = SwapEndian_16(TCP_WINDOW_SIZE);
+		else
+		  TCPHeaderOUT->WindowSize         = SwapEndian_16(TCP_WINDOW_SIZE - ConnectionInfo->Buffer.Length);
+
+		TCPHeaderOUT->UrgentPointer        = 0;
+		TCPHeaderOUT->Checksum             = 0;
+		TCPHeaderOUT->Reserved             = 0;
+
+		TCPHeaderOUT->Checksum             = TCP_Checksum16(TCPHeaderOUT, &IPHeaderIN->DestinationAddress,
+		                                                    &IPHeaderIN->SourceAddress, sizeof(TCP_Header_t));
+
+		return sizeof(TCP_Header_t);
+	}
+
+	return NO_RESPONSE;
+}
+
+/** Calculates the appropriate TCP checksum, consisting of the addition of the one's compliment of each word,
+ *  complimented.
+ *
+ *  \param[in] TCPHeaderOutStart   Pointer to the start of the packet's outgoing TCP header
+ *  \param[in] SourceAddress       Source protocol IP address of the outgoing IP header
+ *  \param[in] DestinationAddress  Destination protocol IP address of the outgoing IP header
+ *  \param[in] TCPOutSize          Size in bytes of the TCP data header and payload
+ *
+ *  \return A 16-bit TCP checksum value
+ */
+static uint16_t TCP_Checksum16(void* TCPHeaderOutStart,
+                               const IP_Address_t* SourceAddress,
+                               const IP_Address_t* DestinationAddress,
+                               uint16_t TCPOutSize)
+{
+	uint32_t Checksum = 0;
+
+	/* TCP/IP checksums are the addition of the one's compliment of each word including the IP pseudo-header,
+	   complimented */
+
+	Checksum += ((uint16_t*)SourceAddress)[0];
+	Checksum += ((uint16_t*)SourceAddress)[1];
+	Checksum += ((uint16_t*)DestinationAddress)[0];
+	Checksum += ((uint16_t*)DestinationAddress)[1];
+	Checksum += SwapEndian_16(PROTOCOL_TCP);
+	Checksum += SwapEndian_16(TCPOutSize);
+
+	for (uint16_t CurrWord = 0; CurrWord < (TCPOutSize >> 1); CurrWord++)
+	  Checksum += ((uint16_t*)TCPHeaderOutStart)[CurrWord];
+
+	if (TCPOutSize & 0x01)
+	  Checksum += (((uint16_t*)TCPHeaderOutStart)[TCPOutSize >> 1] & 0x00FF);
+
+	while (Checksum & 0xFFFF0000)
+	  Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16));
+
+	return ~Checksum;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.h
new file mode 100644
index 000000000..ce8a9a2d0
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.h
@@ -0,0 +1,260 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for TCP.c.
+ */
+
+#ifndef _TCP_H_
+#define _TCP_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <stdbool.h>
+
+		#include "EthernetProtocols.h"
+		#include "Ethernet.h"
+		#include "ProtocolDecoders.h"
+
+	/* Macros: */
+		/** Maximum number of TCP ports which can be open at the one time. */
+		#define MAX_OPEN_TCP_PORTS              1
+
+		/** Maximum number of TCP connections which can be sustained at the one time. */
+		#define MAX_TCP_CONNECTIONS             3
+
+		/** TCP window size, giving the maximum number of bytes which can be buffered at the one time. */
+		#define TCP_WINDOW_SIZE                 512
+
+		/** Port number for HTTP transmissions. */
+		#define TCP_PORT_HTTP                   SwapEndian_16(80)
+
+		/** Data direction indicator for a TCP application buffer, indicating data from host-to-device. */
+		#define TCP_PACKETDIR_IN                false
+
+		/** Data direction indicator for a TCP application buffer, indicating data from device-to-host. */
+		#define TCP_PACKETDIR_OUT               true
+
+		/** Congestion Window Reduced TCP flag mask. */
+		#define TCP_FLAG_CWR                    (1 << 7)
+
+		/** Explicit Congestion Notification TCP flag mask. */
+		#define TCP_FLAG_ECE                    (1 << 6)
+
+		/** Urgent TCP flag mask. */
+		#define TCP_FLAG_URG                    (1 << 5)
+
+		/** Data Acknowledge TCP flag mask. */
+		#define TCP_FLAG_ACK                    (1 << 4)
+
+		/** Data Push TCP flag mask. */
+		#define TCP_FLAG_PSH                    (1 << 3)
+
+		/** Reset TCP flag mask. */
+		#define TCP_FLAG_RST                    (1 << 2)
+
+		/** Synchronize TCP flag mask. */
+		#define TCP_FLAG_SYN                    (1 << 1)
+
+		/** Connection Finalize TCP flag mask. */
+		#define TCP_FLAG_FIN                    (1 << 0)
+
+		/** Application macro: Determines if the given application buffer contains a packet received from the host
+		 *
+		 *  \param[in] Buffer  Application buffer to check
+		 *
+		 *  \return Boolean \c true if the buffer contains a packet from the host, \c false otherwise
+		 */
+		#define TCP_APP_HAS_RECEIVED_PACKET(Buffer)  (Buffer->Ready && (Buffer->Direction == TCP_PACKETDIR_IN))
+
+		/** Application macro: Indicates if the application buffer is currently locked by the application for device-to-host transfers.
+		 *
+		 *  \param[in] Buffer  Application buffer to check
+		 *
+		 *  \return Boolean \c true if the buffer has been captured by the application for device-to-host transmissions, \c false otherwise
+		 */
+		#define TCP_APP_HAVE_CAPTURED_BUFFER(Buffer) (!(Buffer->Ready) && Buffer->InUse && \
+		                                              (Buffer->Direction == TCP_PACKETDIR_OUT))
+
+		/** Application macro: Indicates if the application can lock the buffer for multiple continued device-to-host transmissions.
+		 *
+		 *  \param[in] Buffer  Application buffer to check
+		 *
+		 *  \return Boolean \c true if the buffer may be captured by the application for device-to-host transmissions, \c false otherwise
+		 */
+		#define TCP_APP_CAN_CAPTURE_BUFFER(Buffer)   Buffer->InUse
+
+		/** Application macro: Captures the application buffer, locking it for device-to-host transmissions only. This should be
+		 *  performed when the application needs to transmit several packets worth of data in succession with no interruptions from the host.
+		 *
+		 *  \pre The application must check that the buffer can be locked first using TCP_APP_CAN_CAPTURE_BUFFER().
+		 *
+		 *  \param[in] Buffer  Application buffer to lock
+		 */
+		#define TCP_APP_CAPTURE_BUFFER(Buffer)       do { Buffer->Direction = TCP_PACKETDIR_OUT; Buffer->InUse = true; } while (0)
+
+		/** Application macro: Releases a captured application buffer, allowing for host-to-device packets to be received.
+		 *
+		 *  \param[in] Buffer  Application buffer to release
+		 */
+		#define TCP_APP_RELEASE_BUFFER(Buffer)       do { Buffer->InUse = false; } while (0)
+
+		/** Application macro: Sends the contents of the given application buffer to the host.
+		 *
+		 *  \param[in] Buffer  Application buffer to send
+		 *  \param[in] Len     Length of data contained in the buffer
+		 */
+		#define TCP_APP_SEND_BUFFER(Buffer, Len)     do { Buffer->Direction = TCP_PACKETDIR_OUT; Buffer->Length = Len; Buffer->Ready = true; } while (0)
+
+		/** Application macro: Clears the application buffer, ready for a packet to be written to it.
+		 *
+		 *  \param[in] Buffer  Application buffer to clear
+		 */
+		#define TCP_APP_CLEAR_BUFFER(Buffer)         do { Buffer->Ready = false; Buffer->Length = 0; } while (0)
+
+		/** Application macro: Closes an open connection to a host.
+		 *
+		 *  \param[in] Connection  Open TCP connection to close
+		 */
+		#define TCP_APP_CLOSECONNECTION(Connection)  do { Connection->State = TCP_Connection_Closing;  } while (0)
+
+	/* Enums: */
+		/** Enum for possible TCP port states. */
+		enum TCP_PortStates_t
+		{
+			TCP_Port_Closed            = 0, /**< TCP port closed, no connections to a host may be made on this port. */
+			TCP_Port_Open              = 1, /**< TCP port open, connections to a host may be made on this port. */
+		};
+
+		/** Enum for possible TCP connection states. */
+		enum TCP_ConnectionStates_t
+		{
+			TCP_Connection_Listen      = 0, /**< Listening for a connection from a host */
+			TCP_Connection_SYNSent     = 1, /**< Unused */
+			TCP_Connection_SYNReceived = 2, /**< SYN received, waiting for ACK */
+			TCP_Connection_Established = 3, /**< Connection established in both directions */
+			TCP_Connection_FINWait1    = 4, /**< Closing, waiting for ACK */
+			TCP_Connection_FINWait2    = 5, /**< Closing, waiting for FIN ACK */
+			TCP_Connection_CloseWait   = 6, /**< Closing, waiting for ACK */
+			TCP_Connection_Closing     = 7, /**< Unused */
+			TCP_Connection_LastACK     = 8, /**< Unused */
+			TCP_Connection_TimeWait    = 9, /**< Unused */
+			TCP_Connection_Closed      = 10, /**< Connection closed in both directions */
+		};
+
+	/* Type Defines: */
+		/** Type define for a TCP connection buffer structure, including size, data and direction. */
+		typedef struct
+		{
+			uint16_t               Length; /**< Length of data in the TCP application buffer */
+			uint8_t                Data[TCP_WINDOW_SIZE]; /**< TCP application data buffer */
+			bool                   Direction; /**< Buffer transmission direction, either TCP_PACKETDIR_IN  or TCP_PACKETDIR_OUT */
+			bool                   Ready; /**< If data from host, indicates buffer ready to be read, otherwise indicates
+			                               *   buffer ready to be sent to the host
+			                               */
+			bool                   InUse; /**< Indicates if the buffer is locked to to the current direction, and cannot be changed */
+		} TCP_ConnectionBuffer_t;
+
+		/** Type define for a TCP connection information structure. */
+		typedef struct
+		{
+			uint32_t               SequenceNumberIn; /**< Current TCP sequence number for host-to-device */
+			uint32_t               SequenceNumberOut; /**< Current TCP sequence number for device-to-host */
+			TCP_ConnectionBuffer_t Buffer; /**< Connection application data buffer */
+		} TCP_ConnectionInfo_t;
+
+		/** Type define for a complete TCP connection state. */
+		typedef struct
+		{
+			uint16_t               Port; /**< Connection port number on the device */
+			uint16_t               RemotePort; /**< Connection port number on the host */
+			IP_Address_t           RemoteAddress; /**< Connection protocol IP address of the host */
+			TCP_ConnectionInfo_t   Info; /**< Connection information, including application buffer */
+			uint8_t                State; /**< Current connection state, a value from the \ref TCP_ConnectionStates_t enum */
+		} TCP_ConnectionState_t;
+
+		/** Type define for a TCP port state. */
+		typedef struct
+		{
+			uint16_t               Port; /**< TCP port number on the device */
+			uint8_t                State; /**< Current port state, a value from the \ref TCP_PortStates_t enum */
+			void                   (*ApplicationHandler) (TCP_ConnectionState_t* ConnectionState,
+			                                              TCP_ConnectionBuffer_t* Buffer); /**< Port application handler */
+		} TCP_PortState_t;
+
+		/** Type define for a TCP packet header. */
+		typedef struct
+		{
+			uint16_t               SourcePort; /**< Source port of the TCP packet */
+			uint16_t               DestinationPort; /**< Destination port of the TCP packet */
+
+			uint32_t               SequenceNumber; /**< Data sequence number of the packet */
+			uint32_t               AcknowledgmentNumber; /**< Data acknowledgment number of the packet */
+
+			unsigned               Reserved   : 4; /**< Reserved, must be all 0 */
+			unsigned               DataOffset : 4; /**< Offset of the data from the start of the header, in 4 byte chunks */
+			uint8_t                Flags; /**< TCP packet flags */
+			uint16_t               WindowSize; /**< Current data window size (bytes remaining in reception buffer) */
+
+			uint16_t               Checksum; /**< TCP checksum */
+			uint16_t               UrgentPointer; /**< Urgent data pointer */
+		} TCP_Header_t;
+
+	/* Function Prototypes: */
+		void                  TCP_Init(void);
+		void                  TCP_Task(void);
+		bool                  TCP_SetPortState(const uint16_t Port,
+		                                       const uint8_t State,
+		                                       void (*Handler)(TCP_ConnectionState_t*, TCP_ConnectionBuffer_t*));
+		uint8_t               TCP_GetPortState(const uint16_t Port);
+		bool                  TCP_SetConnectionState(const uint16_t Port,
+		                                             const IP_Address_t* RemoteAddress,
+		                                             const uint16_t RemotePort,
+		                                             const uint8_t State);
+		uint8_t               TCP_GetConnectionState(const uint16_t Port,
+		                                             const IP_Address_t* RemoteAddress,
+		                                             const uint16_t RemotePort);
+		TCP_ConnectionInfo_t* TCP_GetConnectionInfo(const uint16_t Port,
+		                                            const IP_Address_t* RemoteAddress,
+		                                            const uint16_t RemotePort);
+		int16_t               TCP_ProcessTCPPacket(void* IPHeaderInStart,
+		                                           void* TCPHeaderInStart,
+		                                           void* TCPHeaderOutStart);
+
+		#if defined(INCLUDE_FROM_TCP_C)
+			static uint16_t TCP_Checksum16(void* TCPHeaderOutStart,
+			                               const IP_Address_t* SourceAddress,
+			                               const IP_Address_t* DestinationAddress,
+			                               uint16_t TCPOutSize);
+		#endif
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.c b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.c
new file mode 100644
index 000000000..03c19e00e
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.c
@@ -0,0 +1,84 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  User Datagram Protocol (UDP) packet handling routines. This protocol handles high throughput, low
+ *  reliability packets which are typically used to encapsulate streaming data.
+ */
+
+#define  INCLUDE_FROM_UDP_C
+#include "UDP.h"
+
+/** Processes a UDP packet inside an Ethernet frame, and writes the appropriate response
+ *  to the output Ethernet frame if a sub-protocol handler has created a response packet.
+ *
+ *  \param[in] IPHeaderInStart     Pointer to the start of the incoming packet's IP header
+ *  \param[in] UDPHeaderInStart    Pointer to the start of the incoming packet's UDP header
+ *  \param[out] UDPHeaderOutStart  Pointer to the start of the outgoing packet's UDP header
+ *
+ *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
+ */
+int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart,
+                             void* UDPHeaderInStart,
+                             void* UDPHeaderOutStart)
+{
+	UDP_Header_t* UDPHeaderIN  = (UDP_Header_t*)UDPHeaderInStart;
+	UDP_Header_t* UDPHeaderOUT = (UDP_Header_t*)UDPHeaderOutStart;
+
+	int16_t RetSize = NO_RESPONSE;
+
+	DecodeUDPHeader(UDPHeaderInStart);
+
+	switch (SwapEndian_16(UDPHeaderIN->DestinationPort))
+	{
+		case UDP_PORT_DHCP_REQUEST:
+			RetSize = DHCP_ProcessDHCPPacket(IPHeaderInStart,
+			                                 &((uint8_t*)UDPHeaderInStart)[sizeof(UDP_Header_t)],
+		                                     &((uint8_t*)UDPHeaderOutStart)[sizeof(UDP_Header_t)]);
+			break;
+	}
+
+	/* Check to see if the protocol processing routine has filled out a response */
+	if (RetSize > 0)
+	{
+		/* Fill out the response UDP packet header */
+		UDPHeaderOUT->SourcePort      = UDPHeaderIN->DestinationPort;
+		UDPHeaderOUT->DestinationPort = UDPHeaderIN->SourcePort;
+		UDPHeaderOUT->Checksum        = 0;
+		UDPHeaderOUT->Length          = SwapEndian_16(sizeof(UDP_Header_t) + RetSize);
+
+		/* Return the size of the response so far */
+		return (sizeof(UDP_Header_t) + RetSize);
+	}
+
+	return NO_RESPONSE;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.h
new file mode 100644
index 000000000..d008cb8ed
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.h
@@ -0,0 +1,73 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for UDP.c.
+ */
+
+#ifndef _UDP_H_
+#define _UDP_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+
+		#include "EthernetProtocols.h"
+		#include "Ethernet.h"
+		#include "ProtocolDecoders.h"
+		#include "DHCP.h"
+
+	/* Macros: */
+		/** Source UDP port for a DHCP request. */
+		#define UDP_PORT_DHCP_REQUEST 67
+
+		/** Destination UDP port for a DHCP reply. */
+		#define UDP_PORT_DHCP_REPLY   68
+
+		/** Source UDP port for a DNS request/response. */
+		#define UDP_PORT_DNS          53
+
+	/* Type Defines: */
+		/** Type define for a UDP packet header. */
+		typedef struct
+		{
+			uint16_t SourcePort; /**< Packet source port */
+			uint16_t DestinationPort; /**< Packet destination port */
+			uint16_t Length; /**< Total packet length, in bytes */
+			uint16_t Checksum; /**< Optional UDP packet checksum */
+		} UDP_Header_t;
+
+	/* Function Prototypes: */
+		int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart,
+		                             void* UDPHeaderInStart,
+		                             void* UDPHeaderOutStart);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.c b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.c
new file mode 100644
index 000000000..e0d9e3647
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.c
@@ -0,0 +1,203 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Simple webserver application for demonstrating the RNDIS demo and TCP/IP stack. This
+ *  application will serve up a static HTTP webpage when requested by the host.
+ */
+
+#include "Webserver.h"
+
+/** HTTP server response header, for transmission before the page contents. This indicates to the host that a page exists at the
+ *  given location, and gives extra connection information.
+ */
+const char PROGMEM HTTP200Header[] = "HTTP/1.1 200 OK\r\n"
+                                     "Server: LUFA RNDIS\r\n"
+                                     "Content-type: text/html\r\n"
+                                     "Connection: close\r\n\r\n";
+
+/** HTTP server response header, for transmission before a resource not found error. This indicates to the host that the given
+ *  given URL is invalid, and gives extra error information.
+ */
+const char PROGMEM HTTP404Header[] = "HTTP/1.1 404 Not Found\r\n"
+                                     "Server: LUFA RNDIS\r\n"
+                                     "Connection: close\r\n\r\n";
+
+/** HTTP page to serve to the host when a HTTP request is made. This page is too long for a single response, thus it is automatically
+ *  broken up into smaller blocks and sent as a series of packets each time the webserver application callback is run.
+ */
+const char PROGMEM HTTPPage[]   =
+		"<html>"
+		"	<head>"
+		"		<title>"
+		"			LUFA Webserver Demo"
+		"		</title>"
+		"	</head>"
+		"	<body>"
+		"		<h1>Hello from your USB AVR!</h1>"
+		"		<p>"
+		"			Hello! Welcome to the LUFA RNDIS Demo Webserver test page, running on your USB AVR via the LUFA library. This demonstrates the HTTP webserver, TCP/IP stack and RNDIS demo all running atop the LUFA USB stack."
+		"			<br /><br />"
+		"			<small>Project Information: <a href=\"http://www.lufa-lib.org\">http://www.lufa-lib.org</a>.</small>"
+		"			<hr />"
+		"			<i>LUFA Version: </i>" LUFA_VERSION_STRING
+		"		</p>"
+		"	</body>"
+		"</html>";
+
+
+/** Initializes the Webserver application, opening the appropriate HTTP port in the TCP handler and registering the application
+ *  callback routine for packets sent to the HTTP protocol port.
+ */
+void Webserver_Init(void)
+{
+	/* Open the HTTP port in the TCP protocol so that HTTP connections to the device can be established */
+	TCP_SetPortState(TCP_PORT_HTTP, TCP_Port_Open, Webserver_ApplicationCallback);
+}
+
+/** Indicates if a given request equals the given HTTP command.
+ *
+ *  \param[in] RequestHeader  HTTP request made by the host
+ *  \param[in] Command        HTTP command to compare the request to
+ *
+ *  \return Boolean \c true if the command matches the request, \c false otherwise
+ */
+static bool IsHTTPCommand(uint8_t* RequestHeader,
+                          char* Command)
+{
+	/* Returns true if the non null terminated string in RequestHeader matches the null terminated string Command */
+	return (strncmp((char*)RequestHeader, Command, strlen(Command)) == 0);
+}
+
+/** Application callback routine, executed each time the TCP processing task runs. This callback determines what request
+ *  has been made (if any), and serves up appropriate responses.
+ *
+ *  \param[in] ConnectionState  Pointer to a TCP Connection State structure giving connection information
+ *  \param[in,out] Buffer       Pointer to the application's send/receive packet buffer
+ */
+void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState,
+                                   TCP_ConnectionBuffer_t* const Buffer)
+{
+	char*          BufferDataStr = (char*)Buffer->Data;
+	static uint8_t PageBlock     = 0;
+
+	/* Check to see if a packet has been received on the HTTP port from a remote host */
+	if (TCP_APP_HAS_RECEIVED_PACKET(Buffer))
+	{
+		if (IsHTTPCommand(Buffer->Data, "GET"))
+		{
+			if (IsHTTPCommand(Buffer->Data, "GET / "))
+			{
+				PageBlock = 0;
+
+				/* Copy the HTTP 200 response header into the packet buffer */
+				strcpy_P(BufferDataStr, HTTP200Header);
+
+				/* Send the buffer contents to the host */
+				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
+
+				/* Lock the buffer to Device->Host transmissions only while we send the page contents */
+				TCP_APP_CAPTURE_BUFFER(Buffer);
+			}
+			else
+			{
+				/* Copy the HTTP 404 response header into the packet buffer */
+				strcpy_P(BufferDataStr, HTTP404Header);
+
+				/* Send the buffer contents to the host */
+				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
+
+				/* All data sent, close the connection */
+				TCP_APP_CLOSECONNECTION(ConnectionState);
+			}
+		}
+		else if (IsHTTPCommand(Buffer->Data, "HEAD"))
+		{
+			if (IsHTTPCommand(Buffer->Data, "HEAD / "))
+			{
+				/* Copy the HTTP response header into the packet buffer */
+				strcpy_P(BufferDataStr, HTTP200Header);
+
+				/* Send the buffer contents to the host */
+				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
+			}
+			else
+			{
+				/* Copy the HTTP response header into the packet buffer */
+				strcpy_P(BufferDataStr, HTTP404Header);
+
+				/* Send the buffer contents to the host */
+				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
+			}
+
+			/* All data sent, close the connection */
+			TCP_APP_CLOSECONNECTION(ConnectionState);
+		}
+		else if (IsHTTPCommand(Buffer->Data, "TRACE"))
+		{
+			/* Echo the host's query back to the host */
+			TCP_APP_SEND_BUFFER(Buffer, Buffer->Length);
+
+			/* All data sent, close the connection */
+			TCP_APP_CLOSECONNECTION(ConnectionState);
+		}
+		else
+		{
+			/* Unknown request, just clear the buffer (drop the packet) */
+			TCP_APP_CLEAR_BUFFER(Buffer);
+		}
+	}
+	else if (TCP_APP_HAVE_CAPTURED_BUFFER(Buffer))
+	{
+		uint16_t RemLength = strlen_P(&HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE]);
+		uint16_t Length;
+
+		/* Determine the length of the loaded block */
+		Length = MIN(RemLength, HTTP_REPLY_BLOCK_SIZE);
+
+		/* Copy the next buffer sized block of the page to the packet buffer */
+		strncpy_P(BufferDataStr, &HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE], Length);
+
+		/* Send the buffer contents to the host */
+		TCP_APP_SEND_BUFFER(Buffer, Length);
+
+		/* Check to see if the entire page has been sent */
+		if (PageBlock++ == (sizeof(HTTPPage) / HTTP_REPLY_BLOCK_SIZE))
+		{
+			/* Unlock the buffer so that the host can fill it with future packets */
+			TCP_APP_RELEASE_BUFFER(Buffer);
+
+			/* Close the connection to the host */
+			TCP_APP_CLOSECONNECTION(ConnectionState);
+		}
+	}
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.h
new file mode 100644
index 000000000..a73bd3338
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.h
@@ -0,0 +1,57 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Webserver.c.
+ */
+
+#ifndef _WEBSERVER_H_
+#define _WEBSERVER_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Version.h>
+
+		#include "TCP.h"
+
+	/* Macros: */
+		/** Maximum size of a HTTP response per transmission */
+		#define  HTTP_REPLY_BLOCK_SIZE     128
+
+	/* Function Prototypes: */
+		void Webserver_Init(void);
+		void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState,
+		                                   TCP_ConnectionBuffer_t* const Buffer);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
new file mode 100644
index 000000000..f1dd7a788
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
@@ -0,0 +1,294 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the RNDISEthernet demo. This file contains the main tasks of the demo and
+ *  is responsible for the initial application hardware configuration.
+ */
+
+#include "RNDISEthernet.h"
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	/* Webserver Initialization */
+	TCP_Init();
+	Webserver_Init();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		Ethernet_Task();
+		TCP_Task();
+		RNDIS_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	Serial_Init(9600, false);
+	USB_Init();
+
+	/* Create a stdio stream for the serial port for stdin and stdout */
+	Serial_CreateStream(NULL);
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Device_Connect(void)
+{
+	/* Indicate USB enumerating */
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs and stops all the relevant tasks.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Indicate USB not ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
+ *  of the USB device after enumeration, and configures the RNDIS device endpoints and starts the relevant tasks.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup RNDIS Data Endpoints */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1);
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	/* Process RNDIS class commands */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case RNDIS_REQ_SendEncapsulatedCommand:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Read in the RNDIS message into the message buffer */
+				Endpoint_Read_Control_Stream_LE(RNDISMessageBuffer, USB_ControlRequest.wLength);
+				Endpoint_ClearIN();
+
+				/* Process the RNDIS message */
+				ProcessRNDISControlMessage();
+			}
+
+			break;
+		case RNDIS_REQ_GetEncapsulatedResponse:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				/* Check if a response to the last message is ready */
+				if (!(MessageHeader->MessageLength))
+				{
+					/* Set the response to a single 0x00 byte to indicate that no response is ready */
+					RNDISMessageBuffer[0] = 0;
+					MessageHeader->MessageLength = 1;
+				}
+
+				Endpoint_ClearSETUP();
+
+				/* Write the message response data to the endpoint */
+				Endpoint_Write_Control_Stream_LE(RNDISMessageBuffer, MessageHeader->MessageLength);
+				Endpoint_ClearOUT();
+
+				/* Reset the message header once again after transmission */
+				MessageHeader->MessageLength = 0;
+			}
+
+			break;
+	}
+}
+
+/** Task to manage the sending and receiving of encapsulated RNDIS data and notifications. This removes the RNDIS
+ *  wrapper from received Ethernet frames and places them in the FrameIN global buffer, or adds the RNDIS wrapper
+ *  to a frame in the FrameOUT global before sending the buffer contents to the host.
+ */
+void RNDIS_Task(void)
+{
+	/* Select the notification endpoint */
+	Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPADDR);
+
+	/* Check if a message response is ready for the host */
+	if (Endpoint_IsINReady() && ResponseReady)
+	{
+		USB_Request_Header_t Notification = (USB_Request_Header_t)
+			{
+				.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
+				.bRequest      = RNDIS_NOTIF_ResponseAvailable,
+				.wValue        = 0,
+				.wIndex        = 0,
+				.wLength       = 0,
+			};
+
+		/* Indicate that a message response is ready for the host */
+		Endpoint_Write_Stream_LE(&Notification, sizeof(Notification), NULL);
+
+		/* Finalize the stream transfer to send the last packet */
+		Endpoint_ClearIN();
+
+		/* Indicate a response is no longer ready */
+		ResponseReady = false;
+	}
+
+	/* Don't process the data endpoints until the system is in the data initialized state, and the buffer is free */
+	if ((CurrRNDISState == RNDIS_Data_Initialized) && !(MessageHeader->MessageLength))
+	{
+		/* Create a new packet header for reading/writing */
+		RNDIS_Packet_Message_t RNDISPacketHeader;
+
+		/* Select the data OUT endpoint */
+		Endpoint_SelectEndpoint(CDC_RX_EPADDR);
+
+		/* Check if the data OUT endpoint contains data, and that the IN buffer is empty */
+		if (Endpoint_IsOUTReceived() && !(FrameIN.FrameLength))
+		{
+			/* Read in the packet message header */
+			Endpoint_Read_Stream_LE(&RNDISPacketHeader, sizeof(RNDIS_Packet_Message_t), NULL);
+
+			/* Stall the request if the data is too large */
+			if (RNDISPacketHeader.DataLength > ETHERNET_FRAME_SIZE_MAX)
+			{
+				Endpoint_StallTransaction();
+				return;
+			}
+
+			/* Read in the Ethernet frame into the buffer */
+			Endpoint_Read_Stream_LE(FrameIN.FrameData, RNDISPacketHeader.DataLength, NULL);
+
+			/* Finalize the stream transfer to send the last packet */
+			Endpoint_ClearOUT();
+
+			/* Store the size of the Ethernet frame */
+			FrameIN.FrameLength = RNDISPacketHeader.DataLength;
+		}
+
+		/* Select the data IN endpoint */
+		Endpoint_SelectEndpoint(CDC_TX_EPADDR);
+
+		/* Check if the data IN endpoint is ready for more data, and that the IN buffer is full */
+		if (Endpoint_IsINReady() && FrameOUT.FrameLength)
+		{
+			/* Clear the packet header with all 0s so that the relevant fields can be filled */
+			memset(&RNDISPacketHeader, 0, sizeof(RNDIS_Packet_Message_t));
+
+			/* Construct the required packet header fields in the buffer */
+			RNDISPacketHeader.MessageType   = REMOTE_NDIS_PACKET_MSG;
+			RNDISPacketHeader.MessageLength = (sizeof(RNDIS_Packet_Message_t) + FrameOUT.FrameLength);
+			RNDISPacketHeader.DataOffset    = (sizeof(RNDIS_Packet_Message_t) - sizeof(RNDIS_Message_Header_t));
+			RNDISPacketHeader.DataLength    = FrameOUT.FrameLength;
+
+			/* Send the packet header to the host */
+			Endpoint_Write_Stream_LE(&RNDISPacketHeader, sizeof(RNDIS_Packet_Message_t), NULL);
+
+			/* Send the Ethernet frame data to the host */
+			Endpoint_Write_Stream_LE(FrameOUT.FrameData, RNDISPacketHeader.DataLength, NULL);
+
+			/* Finalize the stream transfer to send the last packet */
+			Endpoint_ClearIN();
+
+			/* Indicate Ethernet OUT buffer no longer full */
+			FrameOUT.FrameLength = 0;
+		}
+	}
+}
+
+/** Ethernet frame processing task. This task checks to see if a frame has been received, and if so hands off the processing
+ *  of the frame to the Ethernet processing routines.
+ */
+void Ethernet_Task(void)
+{
+	/* Task for Ethernet processing. Incoming ethernet frames are loaded into the FrameIN structure, and
+	   outgoing frames should be loaded into the FrameOUT structure. Both structures can only hold a single
+	   Ethernet frame at a time, so the FrameInBuffer bool is used to indicate when the buffers contain data. */
+
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	/* Check if a frame has been written to the IN frame buffer */
+	if (FrameIN.FrameLength)
+	{
+		/* Indicate packet processing started */
+		LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+
+		/* Process the ethernet frame - replace this with your own Ethernet handler code as desired */
+		Ethernet_ProcessPacket();
+
+		/* Indicate packet processing complete */
+		LEDs_SetAllLEDs(LEDMASK_USB_READY);
+	}
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h
new file mode 100644
index 000000000..89858a58b
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h
@@ -0,0 +1,87 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for RNDISEthernet.c.
+ */
+
+#ifndef _RNDISETHERNET_H_
+#define _RNDISETHERNET_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include "Lib/RNDIS.h"
+		#include "Lib/Ethernet.h"
+		#include "Lib/TCP.h"
+		#include "Lib/ARP.h"
+		#include "Lib/Webserver.h"
+		#include "Config/AppConfig.h"
+
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Peripheral/Serial.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+		#define LEDMASK_USB_BUSY          LEDS_LED2
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void RNDIS_Task(void);
+		void Ethernet_Task(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt
new file mode 100644
index 000000000..a2c2ac604
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt
@@ -0,0 +1,146 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage RNDIS Class Ethernet Demo (with Webserver/Telnet)
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>Microsoft RNDIS Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Remote Network Driver Interface demonstration application.
+ *  This gives a simple reference application for implementing
+ *  a CDC RNDIS device acting as a simple network interface for
+ *  ethernet packet exchange. RNDIS is a proprietary Microsoft
+ *  standard; this demo will only work on Windows 2000 (manually
+ *  patched with the Microsoft RNDIS hotfix) and above (with no
+ *  manual patches), or on the latest Linux kernels.
+ *
+ *  Before running, you will need to install the INF file that
+ *  is located in the RNDISEthernet project directory. This will
+ *  enable Windows to use its inbuilt RNDIS drivers, negating the
+ *  need for special Windows drivers for the device. To install,
+ *  right-click the .INF file and choose the Install option. If
+ *  Windows 2000 is used, the Microsoft INF file in the hotfix
+ *  will need to be altered to use the VID/PID of the demo and
+ *  then chosen instead of the LUFA RNDIS INF file when prompted.
+ *
+ *  When enumerated, this demo will install as a new network
+ *  adapter which ethernet packets can be sent to and received
+ *  from. Running on top of the adapter is a very simple TCP/IP
+ *  stack with a HTTP webserver and TELNET host which can be
+ *  accessed through a web browser at IP address 10.0.0.2:80 or
+ *  through a TELNET client at 10.0.0.2:25. This device also supports
+ *  ping echos via the ICMP protocol.
+ *
+ *  \note The TCP/IP stack in this demo has a number of limitations
+ *  and should serve as an example only - it is not fully featured nor
+ *  compliant to the TCP/IP specification. For complete projects, it is
+ *  recommended that it be replaced with an external open source TCP/IP
+ *  stack that is feature complete, such as the uIP stack.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>CLIENT_IP_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configures the IP address given to the client (PC) via the DHCP server.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>SERVER_IP_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configures the IP address of the virtual server.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>ADAPTER_MAC_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configures the MAC address of the RNDIS adapter on the host (PC) side.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>SERVER_MAC_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configures the MAC address of the virtual server on the network.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_ETHERNET</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_ARP</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_IP</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_ICMP</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_TCP</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_UDP</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_DHCP</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/asf.xml b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/asf.xml
new file mode 100644
index 000000000..5bdbf635f
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/asf.xml
@@ -0,0 +1,86 @@
+<asf xmlversion="1.0">

+	<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.avr8">

+		<require idref="lufa.demos.device.lowlevel.rndis"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.xmega">

+		<require idref="lufa.demos.device.lowlevel.rndis"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.lowlevel.rndis" caption="RNDIS Ethernet Device Demo (Low Level APIs)">

+		<info type="description" value="summary">

+		Microsoft RNDIS Ethernet networking device demo, implementing a basic HTTP webserver. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Low Level APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="RNDIS Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="RNDISEthernet.txt"/>

+		<build type="distribute" subtype="user-file" value="LUFA RNDIS.inf"/>

+

+		<build type="c-source" value="RNDISEthernet.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="c-source" value="Lib/ARP.c"/>

+		<build type="c-source" value="Lib/DHCP.c"/>

+		<build type="c-source" value="Lib/Ethernet.c"/>

+		<build type="c-source" value="Lib/ICMP.c"/>

+		<build type="c-source" value="Lib/IP.c"/>

+		<build type="c-source" value="Lib/ProtocolDecoders.c"/>

+		<build type="c-source" value="Lib/RNDIS.c"/>

+		<build type="c-source" value="Lib/TCP.c"/>

+		<build type="c-source" value="Lib/UDP.c"/>

+		<build type="c-source" value="Lib/Webserver.c"/>

+		<build type="header-file" value="RNDISEthernet.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+		<build type="header-file" value="Lib/ARP.h"/>

+		<build type="header-file" value="Lib/DHCP.h"/>

+		<build type="header-file" value="Lib/Ethernet.h"/>

+		<build type="header-file" value="Lib/ICMP.h"/>

+		<build type="header-file" value="Lib/IP.h"/>

+		<build type="header-file" value="Lib/ProtocolDecoders.h"/>

+		<build type="header-file" value="Lib/RNDIS.h"/>

+		<build type="header-file" value="Lib/TCP.h"/>

+		<build type="header-file" value="Lib/UDP.h"/>

+		<build type="header-file" value="Lib/Webserver.h"/>

+		<build type="header-file" value="Lib/EthernetProtocols.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

+		<build type="header-file" value="Config/AppConfig.h"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.peripheral.usart"/>

+		<require idref="lufa.drivers.misc.ansi"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/doxyfile b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/doxyfile
new file mode 100644
index 000000000..29d07c317
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - RNDIS Ethernet Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/makefile b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/makefile
new file mode 100644
index 000000000..82687c1f1
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/RNDISEthernet/makefile
@@ -0,0 +1,44 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = RNDISEthernet
+SRC          = $(TARGET).c Descriptors.c Lib/Ethernet.c Lib/ProtocolDecoders.c Lib/RNDIS.c Lib/ICMP.c Lib/TCP.c Lib/UDP.c \
+               Lib/DHCP.c Lib/ARP.c Lib/IP.c Lib/Webserver.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/LowLevel/VirtualSerial/Config/LUFAConfig.h b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/Config/LUFAConfig.h
new file mode 100644
index 000000000..c2d3227ac
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               4
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/LowLevel/VirtualSerial/Descriptors.c b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/Descriptors.c
new file mode 100644
index 000000000..5ec042cb0
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/Descriptors.c
@@ -0,0 +1,245 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = CDC_CSCP_CDCClass,
+	.SubClass               = CDC_CSCP_NoSpecificSubclass,
+	.Protocol               = CDC_CSCP_NoSpecificProtocol,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2044,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 2,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.CDC_CCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 1,
+
+			.Class                  = CDC_CSCP_CDCClass,
+			.SubClass               = CDC_CSCP_ACMSubclass,
+			.Protocol               = CDC_CSCP_ATCommandProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC_Functional_Header =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
+
+			.CDCSpecification       = VERSION_BCD(1,1,0),
+		},
+
+	.CDC_Functional_ACM =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
+
+			.Capabilities           = 0x06,
+		},
+
+	.CDC_Functional_Union =
+		{
+			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
+
+			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
+			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
+		},
+
+	.CDC_NotificationEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
+			.PollingIntervalMS      = 0xFF
+		},
+
+	.CDC_DCI_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
+			.AlternateSetting       = 0,
+
+			.TotalEndpoints         = 2,
+
+			.Class                  = CDC_CSCP_CDCDataClass,
+			.SubClass               = CDC_CSCP_NoDataSubclass,
+			.Protocol               = CDC_CSCP_NoDataProtocol,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.CDC_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_RX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.CDC_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = CDC_TX_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = CDC_TXRX_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA CDC Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/VirtualSerial/Descriptors.h b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/Descriptors.h
new file mode 100644
index 000000000..c50899ef9
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/Descriptors.h
@@ -0,0 +1,110 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include <avr/pgmspace.h>
+
+	/* Macros: */
+		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 2)
+
+		/** Endpoint address of the CDC device-to-host data IN endpoint. */
+		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 3)
+
+		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
+		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 4)
+
+		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
+		#define CDC_NOTIFICATION_EPSIZE        8
+
+		/** Size in bytes of the CDC data IN and OUT endpoints. */
+		#define CDC_TXRX_EPSIZE                16
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t    Config;
+
+			// CDC Control Interface
+			USB_Descriptor_Interface_t               CDC_CCI_Interface;
+			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
+			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
+			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
+			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
+
+			// CDC Data Interface
+			USB_Descriptor_Interface_t               CDC_DCI_Interface;
+			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
+			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
+			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/VirtualSerial/LUFA VirtualSerial.inf b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/LUFA VirtualSerial.inf
new file mode 100644
index 000000000..21d2d12b6
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/LUFA VirtualSerial.inf
@@ -0,0 +1,66 @@
+;************************************************************
+; Windows USB CDC ACM Setup File
+; Copyright (c) 2000 Microsoft Corporation
+;************************************************************
+
+[DefaultInstall]
+CopyINF="LUFA VirtualSerial.inf"
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%MFGNAME%
+DriverVer=7/1/2012,10.0.0.0
+
+[Manufacturer]
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
+
+[SourceDisksNames]
+
+[SourceDisksFiles]
+
+[DestinationDirs]
+DefaultDestDir=12
+
+[DriverInstall]
+Include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.AddReg
+
+[DriverInstall.Services]
+Include=mdmcpq.inf
+AddService=usbser, 0x00000002, LowerFilter_Service_Inst
+
+[DriverInstall.AddReg]
+HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
+
+;------------------------------------------------------------------------------
+;  Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID.  Use the format as shown below.
+; Note: One INF file can be used for multiple devices with different VID and PIDs.
+; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+[DeviceList.NTx86]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
+
+;------------------------------------------------------------------------------
+;  String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+MFGNAME="http://www.lufa-lib.org"
+DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"
\ No newline at end of file
diff --git a/lib/lufa/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
new file mode 100644
index 000000000..6f83a84af
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
@@ -0,0 +1,243 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the VirtualSerial demo. This file contains the main tasks of the demo and
+ *  is responsible for the initial application hardware configuration.
+ */
+
+#include "VirtualSerial.h"
+
+/** Contains the current baud rate and other settings of the virtual serial port. While this demo does not use
+ *  the physical USART and thus does not use these settings, they must still be retained and returned to the host
+ *  upon request or the host will assume the device is non-functional.
+ *
+ *  These values are set by the host via a class-specific request, however they are not required to be used accurately.
+ *  It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
+ *  serial link characteristics and instead sends and receives data in endpoint streams.
+ */
+static CDC_LineEncoding_t LineEncoding = { .BaudRateBPS = 0,
+                                           .CharFormat  = CDC_LINEENCODING_OneStopBit,
+                                           .ParityType  = CDC_PARITY_None,
+                                           .DataBits    = 8                            };
+
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		CDC_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Device_Connect(void)
+{
+	/* Indicate USB enumerating */
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs and stops the USB management and CDC management tasks.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Indicate USB not ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
+ *  of the USB device after enumeration - the device endpoints are configured and the CDC management task started.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup CDC Data Endpoints */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_RX_EPADDR, EP_TYPE_BULK,  CDC_TXRX_EPSIZE, 1);
+
+	/* Reset line encoding baud rate so that the host knows to send new values */
+	LineEncoding.BaudRateBPS = 0;
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	/* Process CDC specific control requests */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case CDC_REQ_GetLineEncoding:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Write the line coding data to the control endpoint */
+				Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_LineEncoding_t));
+				Endpoint_ClearOUT();
+			}
+
+			break;
+		case CDC_REQ_SetLineEncoding:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Read the line coding data in from the host into the global struct */
+				Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_LineEncoding_t));
+				Endpoint_ClearIN();
+			}
+
+			break;
+		case CDC_REQ_SetControlLineState:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+				Endpoint_ClearStatusStage();
+
+				/* NOTE: Here you can read in the line state mask from the host, to get the current state of the output handshake
+				         lines. The mask is read in from the wValue parameter in USB_ControlRequest, and can be masked against the
+						 CONTROL_LINE_OUT_* masks to determine the RTS and DTR line states using the following code:
+				*/
+			}
+
+			break;
+	}
+}
+
+/** Function to manage CDC data transmission and reception to and from the host. */
+void CDC_Task(void)
+{
+	char*       ReportString    = NULL;
+	uint8_t     JoyStatus_LCL   = Joystick_GetStatus();
+	static bool ActionSent      = false;
+
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	/* Determine if a joystick action has occurred */
+	if (JoyStatus_LCL & JOY_UP)
+	  ReportString = "Joystick Up\r\n";
+	else if (JoyStatus_LCL & JOY_DOWN)
+	  ReportString = "Joystick Down\r\n";
+	else if (JoyStatus_LCL & JOY_LEFT)
+	  ReportString = "Joystick Left\r\n";
+	else if (JoyStatus_LCL & JOY_RIGHT)
+	  ReportString = "Joystick Right\r\n";
+	else if (JoyStatus_LCL & JOY_PRESS)
+	  ReportString = "Joystick Pressed\r\n";
+	else
+	  ActionSent = false;
+
+	/* Flag management - Only allow one string to be sent per action */
+	if ((ReportString != NULL) && (ActionSent == false) && LineEncoding.BaudRateBPS)
+	{
+		ActionSent = true;
+
+		/* Select the Serial Tx Endpoint */
+		Endpoint_SelectEndpoint(CDC_TX_EPADDR);
+
+		/* Write the String to the Endpoint */
+		Endpoint_Write_Stream_LE(ReportString, strlen(ReportString), NULL);
+
+		/* Remember if the packet to send completely fills the endpoint */
+		bool IsFull = (Endpoint_BytesInEndpoint() == CDC_TXRX_EPSIZE);
+
+		/* Finalize the stream transfer to send the last packet */
+		Endpoint_ClearIN();
+
+		/* If the last packet filled the endpoint, send an empty packet to release the buffer on
+		 * the receiver (otherwise all data will be cached until a non-full packet is received) */
+		if (IsFull)
+		{
+			/* Wait until the endpoint is ready for another packet */
+			Endpoint_WaitUntilReady();
+
+			/* Send an empty packet to ensure that the host does not buffer data sent to it */
+			Endpoint_ClearIN();
+		}
+	}
+
+	/* Select the Serial Rx Endpoint */
+	Endpoint_SelectEndpoint(CDC_RX_EPADDR);
+
+	/* Throw away any received data from the host */
+	if (Endpoint_IsOUTReceived())
+	  Endpoint_ClearOUT();
+}
+
diff --git a/lib/lufa/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h
new file mode 100644
index 000000000..dab3d56d6
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h
@@ -0,0 +1,76 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for VirtualSerial.c.
+ */
+
+#ifndef _VIRTUALSERIAL_H_
+#define _VIRTUALSERIAL_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <string.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/Joystick.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY         LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING     (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY           (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR           (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void CDC_Task(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt
new file mode 100644
index 000000000..c802d9950
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt
@@ -0,0 +1,76 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Communications Device Class (Virtual Serial Port) Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Abstract Control Model (ACM)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF CDC Class Standard</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Communications Device Class demonstration application.
+ *  This gives a simple reference application for implementing
+ *  a CDC device acting as a virtual serial port. Joystick
+ *  actions are transmitted to the host as strings. The device
+ *  does not respond to serial data sent from the host.
+ *
+ *  After running this demo for the first time on a new computer,
+ *  you will need to supply the .INF file located in this demo
+ *  project's directory as the device's driver when running under
+ *  Windows. This will enable Windows to use its inbuilt CDC drivers,
+ *  negating the need for custom drivers for the device. Other
+ *  Operating Systems should automatically use their own inbuilt
+ *  CDC-ACM drivers.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/lib/lufa/Demos/Device/LowLevel/VirtualSerial/asf.xml b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/asf.xml
new file mode 100644
index 000000000..1eb328b51
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/asf.xml
@@ -0,0 +1,63 @@
+<asf xmlversion="1.0">

+	<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.avr8">

+		<require idref="lufa.demos.device.lowlevel.cdc"/>

+		<require idref="lufa.boards.dummy.avr8"/>

+		<generator value="as5_8"/>

+

+		<device-support value="at90usb1287"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.xmega">

+		<require idref="lufa.demos.device.lowlevel.cdc"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

+	</project>

+

+	<module type="application" id="lufa.demos.device.lowlevel.cdc" caption="Virtual Serial CDC Device Demo (Low Level APIs)">

+		<info type="description" value="summary">

+		Virtual Serial device demo, implementing a virtual serial channel between the host PC and the device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

+		</info>

+

+ 		<info type="gui-flag" value="move-to-root"/>

+

+		<info type="keyword" value="Technology">

+			<keyword value="Low Level APIs"/>

+			<keyword value="USB Device"/>

+			<keyword value="CDC Class"/>

+		</info>

+

+		<device-support-alias value="lufa_avr8"/>

+		<device-support-alias value="lufa_xmega"/>

+		<device-support-alias value="lufa_uc3"/>

+

+		<build type="distribute" subtype="user-file" value="doxyfile"/>

+		<build type="distribute" subtype="user-file" value="VirtualSerial.txt"/>

+		<build type="distribute" subtype="user-file" value="LUFA VirtualSerial.inf"/>

+

+		<build type="c-source" value="VirtualSerial.c"/>

+		<build type="c-source" value="Descriptors.c"/>

+		<build type="header-file" value="VirtualSerial.h"/>

+		<build type="header-file" value="Descriptors.h"/>

+

+		<build type="module-config" subtype="path" value="Config"/>

+		<build type="header-file" value="Config/LUFAConfig.h"/>

+

+		<require idref="lufa.common"/>

+		<require idref="lufa.platform"/>

+		<require idref="lufa.drivers.usb"/>

+		<require idref="lufa.drivers.board"/>

+		<require idref="lufa.drivers.board.leds"/>

+		<require idref="lufa.drivers.board.buttons"/>

+		<require idref="lufa.drivers.board.joystick"/>

+	</module>

+</asf>

diff --git a/lib/lufa/Demos/Device/LowLevel/VirtualSerial/doxyfile b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/doxyfile
new file mode 100644
index 000000000..aa21df582
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/doxyfile
@@ -0,0 +1,2395 @@
+# Doxyfile 1.8.9
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = "LUFA Library - Virtual Serial Device Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = NO
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# compiled with the --with-libclang option.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = YES
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sf.net) file that captures the
+# structure of the code including all documentation. Note that this feature is
+# still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = NO
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff --git a/lib/lufa/Demos/Device/LowLevel/VirtualSerial/makefile b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/makefile
new file mode 100644
index 000000000..b33840cae
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/VirtualSerial/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = VirtualSerial
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk
diff --git a/lib/lufa/Demos/Device/LowLevel/makefile b/lib/lufa/Demos/Device/LowLevel/makefile
new file mode 100644
index 000000000..a713c9d4c
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/makefile
@@ -0,0 +1,46 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+
+# Makefile to build all the LUFA Device Demos. Call with "make all" to
+# rebuild all Device demos.
+
+# Projects are pre-cleaned before each one is built, to ensure any
+# custom LUFA library build options are reflected in the compiled
+# code.
+
+PROJECT_DIRECTORIES := $(shell ls -d */)
+
+# This makefile is potentially infinitely recursive if something really bad
+# happens when determining the set of project directories - hard-abort if
+# more than 10 levels deep to avoid angry emails.
+ifeq ($(MAKELEVEL), 10)
+   $(error EMERGENCY ABORT: INFINITE RECURSION DETECTED)
+endif
+
+# Need to special-case building without a per-project object directory
+ifeq ($(OBJDIR),)
+   # If no target specified, force "clean all" and disallow parallel build
+   ifeq ($(MAKECMDGOALS),)
+      MAKECMDGOALS := clean all
+      .NOTPARALLEL:
+   endif
+
+   # If one of the targets is to build, force "clean" beforehand and disallow parallel build
+   ifneq ($(findstring all, $(MAKECMDGOALS)),)
+      MAKECMDGOALS := clean $(MAKECMDGOALS)
+      .NOTPARALLEL:
+   endif
+endif
+
+%: $(PROJECT_DIRECTORIES)
+	@echo . > /dev/null
+
+$(PROJECT_DIRECTORIES):
+	@$(MAKE) -C $@ $(MAKECMDGOALS)
+
+.PHONY: $(PROJECT_DIRECTORIES)
diff --git a/lib/lufa/Demos/Device/makefile b/lib/lufa/Demos/Device/makefile
new file mode 100644
index 000000000..abeb3f4a8
--- /dev/null
+++ b/lib/lufa/Demos/Device/makefile
@@ -0,0 +1,21 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+
+# Makefile to build all the LUFA Class Driver and Low Level Demos. Call with
+# "make all" to rebuild all demos of both types.
+
+# Projects are pre-cleaned before each one is built, to ensure any
+# custom LUFA library build options are reflected in the compiled
+# code.
+
+all:
+
+%:
+	$(MAKE) -C ClassDriver $@
+	$(MAKE) -C LowLevel $@
+