diff options
Diffstat (limited to 'keyboards')
78 files changed, 282 insertions, 1504 deletions
diff --git a/keyboards/ares/config.h b/keyboards/ares/config.h index 4bfe0867b..ffbe45605 100644 --- a/keyboards/ares/config.h +++ b/keyboards/ares/config.h @@ -23,7 +23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 #define MANUFACTURER LSJ -#define PRODUCT QMK Firmware for Ares +#define PRODUCT Ares #define RGBLED_NUM 16 diff --git a/keyboards/ares/usbconfig.h b/keyboards/ares/usbconfig.h index 7c85ff22c..ad9c95c5d 100644 --- a/keyboards/ares/usbconfig.h +++ b/keyboards/ares/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'L', 'S', 'J' -#define USB_CFG_VENDOR_NAME_LEN 3 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'A', 'r', 'e', 's' -#define USB_CFG_DEVICE_NAME_LEN 4 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/bfake/config.h b/keyboards/bfake/config.h index 86faba21d..6c4710a9e 100644 --- a/keyboards/bfake/config.h +++ b/keyboards/bfake/config.h @@ -22,8 +22,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -#define MANUFACTURER NotActuallyWinkeyless -#define PRODUCT b.fake +#define MANUFACTURER NotWinkeyless +#define PRODUCT B.fake #define RGBLED_NUM 16 diff --git a/keyboards/bfake/usbconfig.h b/keyboards/bfake/usbconfig.h index 85a915bb4..ad9c95c5d 100644 --- a/keyboards/bfake/usbconfig.h +++ b/keyboards/bfake/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/chidori/usbconfig.h b/keyboards/chidori/usbconfig.h index 48b72de93..ee040d16b 100644 --- a/keyboards/chidori/usbconfig.h +++ b/keyboards/chidori/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'K','a','g','i','z','a','r','a','y','a' -#define USB_CFG_VENDOR_NAME_LEN 10 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'C', 'h', 'i', 'd', 'o', 'r', 'i' -#define USB_CFG_DEVICE_NAME_LEN 7 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/coseyfannitutti/discipad/usbconfig.h b/keyboards/coseyfannitutti/discipad/usbconfig.h index 510658b44..ee040d16b 100644 --- a/keyboards/coseyfannitutti/discipad/usbconfig.h +++ b/keyboards/coseyfannitutti/discipad/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'c','o','s','e','y','f','a','n','n','i','t','u','t','t','i' -#define USB_CFG_VENDOR_NAME_LEN 15 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'D','I','S','C','I','P','A','D' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -#define USB_CFG_SERIAL_NUMBER '0' -#define USB_CFG_SERIAL_NUMBER_LEN 1 -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/coseyfannitutti/discipline/usbconfig.h b/keyboards/coseyfannitutti/discipline/usbconfig.h index da3ed4607..ee040d16b 100644 --- a/keyboards/coseyfannitutti/discipline/usbconfig.h +++ b/keyboards/coseyfannitutti/discipline/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'c','o','s','e','y','f','a','n','n','i','t','u','t','t','i' -#define USB_CFG_VENDOR_NAME_LEN 15 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'D','I','S','C','I','P','L','I','N','E' -#define USB_CFG_DEVICE_NAME_LEN 10 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -#define USB_CFG_SERIAL_NUMBER '0' -#define USB_CFG_SERIAL_NUMBER_LEN 1 -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/coseyfannitutti/mysterium/usbconfig.h b/keyboards/coseyfannitutti/mysterium/usbconfig.h index 809b91245..bec7cc295 100644 --- a/keyboards/coseyfannitutti/mysterium/usbconfig.h +++ b/keyboards/coseyfannitutti/mysterium/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'c','o','s','e','y','f','a','n','n','i','t','u','t','t','i' -#define USB_CFG_VENDOR_NAME_LEN 15 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'M','Y','S','T','E','R','I','U','M' -#define USB_CFG_DEVICE_NAME_LEN 9 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -#define USB_CFG_SERIAL_NUMBER '0' -#define USB_CFG_SERIAL_NUMBER_LEN 1 -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/coseyfannitutti/romeo/usbconfig.h b/keyboards/coseyfannitutti/romeo/usbconfig.h index 36926d9a7..ee040d16b 100644 --- a/keyboards/coseyfannitutti/romeo/usbconfig.h +++ b/keyboards/coseyfannitutti/romeo/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'c','o','s','e','y','f','a','n','n','i','t','u','t','t','i' -#define USB_CFG_VENDOR_NAME_LEN 15 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'R','O','M','E','O' -#define USB_CFG_DEVICE_NAME_LEN 5 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -#define USB_CFG_SERIAL_NUMBER '0' -#define USB_CFG_SERIAL_NUMBER_LEN 1 -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/db/db63/config.h b/keyboards/db/db63/config.h index 424784017..85625b720 100644 --- a/keyboards/db/db63/config.h +++ b/keyboards/db/db63/config.h @@ -20,8 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0xFAAD #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -// You can edit those at usbconfig.h about line 250. These values will -// unforunatly be ignored so far #define MANUFACTURER HNB #define PRODUCT DB63v1 Hotswap diff --git a/keyboards/db/db63/usbconfig.h b/keyboards/db/db63/usbconfig.h index 0dfe8b3ba..a3aa0f7c8 100644 --- a/keyboards/db/db63/usbconfig.h +++ b/keyboards/db/db63/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'H', 'N', 'B' -#define USB_CFG_VENDOR_NAME_LEN 3 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'D', 'B', '6', '3', 'H', 'S' -#define USB_CFG_DEVICE_NAME_LEN 6 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/donutcables/budget96/usbconfig.h b/keyboards/donutcables/budget96/usbconfig.h index 03ec48972..d0454d04c 100644 --- a/keyboards/donutcables/budget96/usbconfig.h +++ b/keyboards/donutcables/budget96/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'D', 'o', 'n', 'u', 't', 'C', 'a', 'b', 'l', 'e', 's' -#define USB_CFG_VENDOR_NAME_LEN 11 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'b', 'u', 'd', 'g', 'e', 't', '9', '6' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/eve/meteor/usbconfig.h b/keyboards/eve/meteor/usbconfig.h index 9b045607f..5fad0b3a5 100644 --- a/keyboards/eve/meteor/usbconfig.h +++ b/keyboards/eve/meteor/usbconfig.h @@ -220,31 +220,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -326,11 +301,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/exclusive/e6v2/le_bmc/config.h b/keyboards/exclusive/e6v2/le_bmc/config.h index ca680f502..198e73265 100644 --- a/keyboards/exclusive/e6v2/le_bmc/config.h +++ b/keyboards/exclusive/e6v2/le_bmc/config.h @@ -21,8 +21,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x0000 #define DEVICE_VER 0x0001 -#define MANUFACTURER exclusive -#define PRODUCT e6v2 le bmc +#define MANUFACTURER Exclusive / E-Team +#define PRODUCT E6-V2 LE BMC #define DESCRIPTION A custom 60% keyboard /* key matrix size */ diff --git a/keyboards/exclusive/e6v2/le_bmc/usbconfig.h b/keyboards/exclusive/e6v2/le_bmc/usbconfig.h index 7a1471a06..a3aa0f7c8 100644 --- a/keyboards/exclusive/e6v2/le_bmc/usbconfig.h +++ b/keyboards/exclusive/e6v2/le_bmc/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'E', 'x', 'c', 'l', 'u', 's', 'i', 'v', 'e' -#define USB_CFG_VENDOR_NAME_LEN 9 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'E', '6', 'V', '2' -#define USB_CFG_DEVICE_NAME_LEN 4 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/exclusive/e6v2/oe_bmc/config.h b/keyboards/exclusive/e6v2/oe_bmc/config.h index a6b56ba00..c26006b6a 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/config.h +++ b/keyboards/exclusive/e6v2/oe_bmc/config.h @@ -21,8 +21,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x0000 #define DEVICE_VER 0x0001 -#define MANUFACTURER exclusive -#define PRODUCT e6v2 oe bmc +#define MANUFACTURER Exclusive / E-Team +#define PRODUCT E6-V2 OE BMC #define DESCRIPTION A custom 60% keyboard /* key matrix size */ diff --git a/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h b/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h index 7a1471a06..a3aa0f7c8 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h +++ b/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'E', 'x', 'c', 'l', 'u', 's', 'i', 'v', 'e' -#define USB_CFG_VENDOR_NAME_LEN 9 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'E', '6', 'V', '2' -#define USB_CFG_DEVICE_NAME_LEN 4 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/exent/usbconfig.h b/keyboards/exent/usbconfig.h index 83ad06544..4acb6b281 100644 --- a/keyboards/exent/usbconfig.h +++ b/keyboards/exent/usbconfig.h @@ -220,31 +220,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -326,11 +301,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/facew/config.h b/keyboards/facew/config.h index be442548d..ab9130b80 100644 --- a/keyboards/facew/config.h +++ b/keyboards/facew/config.h @@ -22,8 +22,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -#define MANUFACTURER NotActuallyWinkeyless -#define PRODUCT facew +#define MANUFACTURER SPRiT +#define PRODUCT FaceW #define RGBLED_NUM 16 diff --git a/keyboards/facew/usbconfig.h b/keyboards/facew/usbconfig.h index 47755fa8c..a3aa0f7c8 100644 --- a/keyboards/facew/usbconfig.h +++ b/keyboards/facew/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'S', 'p', 'r', 'i', 't' -#define USB_CFG_VENDOR_NAME_LEN 5 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'F', 'a', 'c', 'e', 'W' -#define USB_CFG_DEVICE_NAME_LEN 5 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/ft/mars80/usbconfig.h b/keyboards/ft/mars80/usbconfig.h index 4430d9e67..a3aa0f7c8 100644 --- a/keyboards/ft/mars80/usbconfig.h +++ b/keyboards/ft/mars80/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'f', 't' -#define USB_CFG_VENDOR_NAME_LEN 2 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'm', 'a', 'r', 's', '8', '0' -#define USB_CFG_DEVICE_NAME_LEN 6 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/gingham/usbconfig.h b/keyboards/gingham/usbconfig.h index 3c7aa0da0..ee040d16b 100644 --- a/keyboards/gingham/usbconfig.h +++ b/keyboards/gingham/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'Y','i','a','n','c','a','r','-','D','e', 's', 'i', 'g', 'n', 's' -#define USB_CFG_VENDOR_NAME_LEN 15 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'G', 'i', 'n', 'g', 'h', 'a', 'm' -#define USB_CFG_DEVICE_NAME_LEN 7 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -#define USB_CFG_SERIAL_NUMBER '0' -#define USB_CFG_SERIAL_NUMBER_LEN 1 -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/gray_studio/hb85/usbconfig.h b/keyboards/gray_studio/hb85/usbconfig.h index 186e2dca3..a3aa0f7c8 100644 --- a/keyboards/gray_studio/hb85/usbconfig.h +++ b/keyboards/gray_studio/hb85/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'G', 'r', 'a', 'y', ' ', 'S', 't', 'u', 'd', 'i', 'o' -#define USB_CFG_VENDOR_NAME_LEN 11 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'H', 'B', '8', '5' -#define USB_CFG_DEVICE_NAME_LEN 4 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/handwired/hnah40/config.h b/keyboards/handwired/hnah40/config.h index 3d3c05fd4..9583c4c38 100644 --- a/keyboards/handwired/hnah40/config.h +++ b/keyboards/handwired/hnah40/config.h @@ -23,7 +23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x0000 #define DEVICE_VER 0x0002 #define MANUFACTURER HnahKB -#define PRODUCT hnah40 +#define PRODUCT Hnah40 #define DESCRIPTION Custom 40% PCB /* key matrix size */ diff --git a/keyboards/handwired/hnah40/usbconfig.h b/keyboards/handwired/hnah40/usbconfig.h index b26a3c7d6..ee040d16b 100644 --- a/keyboards/handwired/hnah40/usbconfig.h +++ b/keyboards/handwired/hnah40/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'H','n','a','h','K','B' -#define USB_CFG_VENDOR_NAME_LEN 6 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'H', 'n', 'a', 'h', '4', '0' -#define USB_CFG_DEVICE_NAME_LEN 6 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -#define USB_CFG_SERIAL_NUMBER 'H','n','a','h','K','B' -#define USB_CFG_SERIAL_NUMBER_LEN 6 -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/j80/usbconfig.h b/keyboards/j80/usbconfig.h index 0c377f4b7..4acb6b281 100644 --- a/keyboards/j80/usbconfig.h +++ b/keyboards/j80/usbconfig.h @@ -220,31 +220,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'J', 'E', 'R' -#define USB_CFG_VENDOR_NAME_LEN 3 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'J', '8', '0' -#define USB_CFG_DEVICE_NAME_LEN 3 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -326,11 +301,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/jc65/v32a/config.h b/keyboards/jc65/v32a/config.h index 11f39a5e0..6cf71ab3a 100644 --- a/keyboards/jc65/v32a/config.h +++ b/keyboards/jc65/v32a/config.h @@ -22,8 +22,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x1234 #define PRODUCT_ID 0x5679 #define DEVICE_VER 0x0200 -#define MANUFACTURER winkeyless.kr -#define PRODUCT JC65 PS2AVRGB +#define MANUFACTURER RAMA +#define PRODUCT JC65 BMC /* matrix size */ #define MATRIX_ROWS 7 diff --git a/keyboards/jc65/v32a/usbconfig.h b/keyboards/jc65/v32a/usbconfig.h index 85a915bb4..ad9c95c5d 100644 --- a/keyboards/jc65/v32a/usbconfig.h +++ b/keyboards/jc65/v32a/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/jj40/config.h b/keyboards/jj40/config.h index 3138023bb..9a1eadb78 100644 --- a/keyboards/jj40/config.h +++ b/keyboards/jj40/config.h @@ -19,10 +19,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -// TODO: share these strings with usbconfig.h -// Edit usbconfig.h to change these. -#define MANUFACTURER Kprepublic -#define PRODUCT jj40 +#define MANUFACTURER KPrepublic +#define PRODUCT JJ40 /* matrix size */ #define MATRIX_ROWS 4 diff --git a/keyboards/jj40/usbconfig.h b/keyboards/jj40/usbconfig.h index 4599c03dc..ad9c95c5d 100644 --- a/keyboards/jj40/usbconfig.h +++ b/keyboards/jj40/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'j', 'j', '4', '0' -#define USB_CFG_DEVICE_NAME_LEN 4 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/jj4x4/config.h b/keyboards/jj4x4/config.h index d8ccef3ad..8c5b1988d 100644 --- a/keyboards/jj4x4/config.h +++ b/keyboards/jj4x4/config.h @@ -22,10 +22,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -// TODO: share these strings with usbconfig.h -// Edit usbconfig.h to change these. -#define MANUFACTURER Kprepublic -#define PRODUCT jj4x4 +#define MANUFACTURER KPrepublic +#define PRODUCT JJ4x4 /* matrix size */ #define MATRIX_ROWS 4 diff --git a/keyboards/jj4x4/usbconfig.h b/keyboards/jj4x4/usbconfig.h index 96bf2eda8..ad9c95c5d 100644 --- a/keyboards/jj4x4/usbconfig.h +++ b/keyboards/jj4x4/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'j', 'j', '4', 'x', '4' -#define USB_CFG_DEVICE_NAME_LEN 5 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/jj50/config.h b/keyboards/jj50/config.h index 2f0e98d53..8453f5588 100644 --- a/keyboards/jj50/config.h +++ b/keyboards/jj50/config.h @@ -25,10 +25,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -// TODO: share these strings with usbconfig.h -// Edit usbconfig.h to change these. -#define MANUFACTURER kprepublic -#define PRODUCT jj50 +#define MANUFACTURER KPrepublic +#define PRODUCT JJ50 #define DESCRIPTION Preonic-like clone /* matrix size */ diff --git a/keyboards/jj50/usbconfig.h b/keyboards/jj50/usbconfig.h index b05fc975e..ad9c95c5d 100644 --- a/keyboards/jj50/usbconfig.h +++ b/keyboards/jj50/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'K', 'P', 'R', 'e', 'p', 'u', 'b', 'l', 'i', 'c' -#define USB_CFG_VENDOR_NAME_LEN 10 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'J','J','5','0',' ','K','e','y','b','o','a','r','d' -#define USB_CFG_DEVICE_NAME_LEN 13 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/kbdfans/kbdpad/mk1/config.h b/keyboards/kbdfans/kbdpad/mk1/config.h index d41ec6001..1646a1af1 100644 --- a/keyboards/kbdfans/kbdpad/mk1/config.h +++ b/keyboards/kbdfans/kbdpad/mk1/config.h @@ -23,7 +23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 #define MANUFACTURER KBDfans -#define PRODUCT KBDPAD-MKI +#define PRODUCT KBDPAD Mk. I #define MATRIX_ROWS 6 #define MATRIX_COLS 4 diff --git a/keyboards/kbdfans/kbdpad/mk1/usbconfig.h b/keyboards/kbdfans/kbdpad/mk1/usbconfig.h index e65d210ac..a3aa0f7c8 100644 --- a/keyboards/kbdfans/kbdpad/mk1/usbconfig.h +++ b/keyboards/kbdfans/kbdpad/mk1/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/keycapsss/plaid_pad/usbconfig.h b/keyboards/keycapsss/plaid_pad/usbconfig.h index e208e99f2..0cacbd724 100644 --- a/keyboards/keycapsss/plaid_pad/usbconfig.h +++ b/keyboards/keycapsss/plaid_pad/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'K','e','y','c','a','p','s','s','s' -#define USB_CFG_VENDOR_NAME_LEN 9 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'P', 'l', 'a', 'i', 'd', '-', 'P', 'a', 'd' -#define USB_CFG_DEVICE_NAME_LEN 9 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/kira80/usbconfig.h b/keyboards/kira80/usbconfig.h index 33030c831..ad9c95c5d 100644 --- a/keyboards/kira80/usbconfig.h +++ b/keyboards/kira80/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'E', 'V', 'E' -#define USB_CFG_VENDOR_NAME_LEN 3 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'K', 'i', 'r', 'a', '8', '0' -#define USB_CFG_DEVICE_NAME_LEN 6 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/leeku/finger65/config.h b/keyboards/leeku/finger65/config.h index 584db4ad3..dcf1aad65 100644 --- a/keyboards/leeku/finger65/config.h +++ b/keyboards/leeku/finger65/config.h @@ -24,7 +24,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x6050 #define DEVICE_VER 0x0100 #define MANUFACTURER LeeKu -#define PRODUCT L3 +#define PRODUCT Finger65 #define DESCRIPTION QMK keyboard firmware for L3 #define RGBLED_NUM 12 diff --git a/keyboards/leeku/finger65/usbconfig.h b/keyboards/leeku/finger65/usbconfig.h index 48be89046..12e49e0ee 100644 --- a/keyboards/leeku/finger65/usbconfig.h +++ b/keyboards/leeku/finger65/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'L', 'e', 'e', 'k', 'u' -#define USB_CFG_VENDOR_NAME_LEN 5 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'F', 'i', 'n', 'g', 'e', 'r', '6', '5' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -335,11 +310,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_UNKNOWN 0 diff --git a/keyboards/mechmini/v1/config.h b/keyboards/mechmini/v1/config.h index 80a79bf86..0df0066f1 100644 --- a/keyboards/mechmini/v1/config.h +++ b/keyboards/mechmini/v1/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0xFEED #define PRODUCT_ID 0xCA40 #define DEVICE_VER 0x0001 -// TODO: share these strings with usbconfig.h -// Edit usbconfig.h to change these. #define MANUFACTURER MECHKEYS #define PRODUCT Mechmini #define DESCRIPTION 40% modular keyboard diff --git a/keyboards/mechmini/v1/usbconfig.h b/keyboards/mechmini/v1/usbconfig.h index 85a915bb4..ad9c95c5d 100644 --- a/keyboards/mechmini/v1/usbconfig.h +++ b/keyboards/mechmini/v1/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/mehkee96/config.h b/keyboards/mehkee96/config.h index afc9d0a7b..dc8c593ad 100644 --- a/keyboards/mehkee96/config.h +++ b/keyboards/mehkee96/config.h @@ -6,8 +6,8 @@ #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -#define MANUFACTURER mehkee -#define PRODUCT 96kee +#define MANUFACTURER Mehkee +#define PRODUCT 96KEE /* matrix size */ #define MATRIX_ROWS 8 diff --git a/keyboards/mehkee96/usbconfig.h b/keyboards/mehkee96/usbconfig.h index 85a915bb4..ad9c95c5d 100644 --- a/keyboards/mehkee96/usbconfig.h +++ b/keyboards/mehkee96/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/mt40/config.h b/keyboards/mt40/config.h index 5e3eaf935..3efa18292 100644 --- a/keyboards/mt40/config.h +++ b/keyboards/mt40/config.h @@ -27,7 +27,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DEVICE_VER 0x0001 #define MANUFACTURER ThomasDehaeze -#define PRODUCT mt40 +#define PRODUCT MT40 #define DESCRIPTION A Planck clone diff --git a/keyboards/mt40/usbconfig.h b/keyboards/mt40/usbconfig.h index e1f5f2ea4..ad9c95c5d 100644 --- a/keyboards/mt40/usbconfig.h +++ b/keyboards/mt40/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'T', 'h', 'o', 'm', 'a', 's', 'D', 'e', 'h', 'a', 'e', 'z', 'e' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'c', 'u', 's', 't', 'o', 'm', '4', '8' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/panc60/config.h b/keyboards/panc60/config.h index b3bcdc973..002ff7cf9 100644 --- a/keyboards/panc60/config.h +++ b/keyboards/panc60/config.h @@ -23,7 +23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 #define MANUFACTURER Panc Interactive -#define PRODUCT panc60 +#define PRODUCT Panc60 #define RGBLED_NUM 12 diff --git a/keyboards/panc60/usbconfig.h b/keyboards/panc60/usbconfig.h index e65d210ac..a3aa0f7c8 100644 --- a/keyboards/panc60/usbconfig.h +++ b/keyboards/panc60/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/pearl/usbconfig.h b/keyboards/pearl/usbconfig.h index e65d210ac..a3aa0f7c8 100644 --- a/keyboards/pearl/usbconfig.h +++ b/keyboards/pearl/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/percent/canoe/config.h b/keyboards/percent/canoe/config.h index b6cc5df23..c6720ea16 100644 --- a/keyboards/percent/canoe/config.h +++ b/keyboards/percent/canoe/config.h @@ -23,7 +23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -#define MANUFACTURER NotActuallyPercent +#define MANUFACTURER Percent Studios #define PRODUCT CANOE #define RGBLED_NUM 2 diff --git a/keyboards/percent/canoe/usbconfig.h b/keyboards/percent/canoe/usbconfig.h index 85a915bb4..ad9c95c5d 100644 --- a/keyboards/percent/canoe/usbconfig.h +++ b/keyboards/percent/canoe/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/percent/skog/config.h b/keyboards/percent/skog/config.h index cbfb2b6a5..099de6da2 100644 --- a/keyboards/percent/skog/config.h +++ b/keyboards/percent/skog/config.h @@ -21,7 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -#define MANUFACTURER Percent +#define MANUFACTURER Percent Studios #define PRODUCT Skog TKL /* matrix size */ diff --git a/keyboards/percent/skog/usbconfig.h b/keyboards/percent/skog/usbconfig.h index 3a0628658..ad9c95c5d 100644 --- a/keyboards/percent/skog/usbconfig.h +++ b/keyboards/percent/skog/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'P','e','r','c','e','n','t' -#define USB_CFG_VENDOR_NAME_LEN 7 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'S','k','o','g',' ','T','K','L' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/percent/skog_lite/config.h b/keyboards/percent/skog_lite/config.h index a3d4a225f..625effca8 100644 --- a/keyboards/percent/skog_lite/config.h +++ b/keyboards/percent/skog_lite/config.h @@ -22,7 +22,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -#define MANUFACTURER Percent +#define MANUFACTURER Percent Studios #define PRODUCT Skog Lite #define RGBLED_NUM 18 diff --git a/keyboards/percent/skog_lite/usbconfig.h b/keyboards/percent/skog_lite/usbconfig.h index e65d210ac..a3aa0f7c8 100644 --- a/keyboards/percent/skog_lite/usbconfig.h +++ b/keyboards/percent/skog_lite/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/plaid/config.h b/keyboards/plaid/config.h index 8005df2ce..4d7bedee5 100644 --- a/keyboards/plaid/config.h +++ b/keyboards/plaid/config.h @@ -25,7 +25,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x27db #define DEVICE_VER 0x0002 #define MANUFACTURER dm9records -#define PRODUCT plaid +#define PRODUCT Plaid #define DESCRIPTION 12x4 ortholinear keyboard with through hole components /* key matrix size */ diff --git a/keyboards/plaid/usbconfig.h b/keyboards/plaid/usbconfig.h index ba48a3264..ee040d16b 100644 --- a/keyboards/plaid/usbconfig.h +++ b/keyboards/plaid/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'd','m','9','r','e','c','o','r','d','s' -#define USB_CFG_VENDOR_NAME_LEN 10 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'P', 'l', 'a', 'i', 'd' -#define USB_CFG_DEVICE_NAME_LEN 5 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -#define USB_CFG_SERIAL_NUMBER 'd','m','9','r','e','c','o','r','d','s','.','c','o','m',':','p','1' -#define USB_CFG_SERIAL_NUMBER_LEN 17 -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/singa/usbconfig.h b/keyboards/singa/usbconfig.h index e65d210ac..a3aa0f7c8 100644 --- a/keyboards/singa/usbconfig.h +++ b/keyboards/singa/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/tartan/usbconfig.h b/keyboards/tartan/usbconfig.h index df896cfa9..0cacbd724 100644 --- a/keyboards/tartan/usbconfig.h +++ b/keyboards/tartan/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'd','m','9','r','e','c','o','r','d','s' -#define USB_CFG_VENDOR_NAME_LEN 10 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'T', 'a', 'r', 't', 'a', 'n' -#define USB_CFG_DEVICE_NAME_LEN 6 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -#define USB_CFG_SERIAL_NUMBER 'd','m','9','r','e','c','o','r','d','s','.','c','o','m',':','t','1' -#define USB_CFG_SERIAL_NUMBER_LEN 17 -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/tgr/alice/config.h b/keyboards/tgr/alice/config.h index cf1f107a3..20f4c5970 100644 --- a/keyboards/tgr/alice/config.h +++ b/keyboards/tgr/alice/config.h @@ -20,10 +20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422E #define DEVICE_VER 0x0200 -// TODO: share these strings with usbconfig.h -// Edit usbconfig.h to change these. #define MANUFACTURER TGR -#define PRODUCT TGR Alice +#define PRODUCT Alice /* matrix size */ #define MATRIX_ROWS 6 diff --git a/keyboards/tgr/alice/usbconfig.h b/keyboards/tgr/alice/usbconfig.h index d2955d062..ad9c95c5d 100644 --- a/keyboards/tgr/alice/usbconfig.h +++ b/keyboards/tgr/alice/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'T', 'G', 'R' -#define USB_CFG_VENDOR_NAME_LEN 3 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'T', 'G', 'R', ' ', 'A', 'l', 'i', 'c', 'e' -#define USB_CFG_DEVICE_NAME_LEN 9 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/tgr/jane/usbconfig.h b/keyboards/tgr/jane/usbconfig.h index e65d210ac..a3aa0f7c8 100644 --- a/keyboards/tgr/jane/usbconfig.h +++ b/keyboards/tgr/jane/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/unikorn/config.h b/keyboards/unikorn/config.h index e6bdbe7f2..c5c9b0466 100644 --- a/keyboards/unikorn/config.h +++ b/keyboards/unikorn/config.h @@ -22,8 +22,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -#define MANUFACTURER Singa and TGR -#define PRODUCT Unikorn 60 +#define MANUFACTURER Singa x TGR +#define PRODUCT Unikorn60 #define MATRIX_ROWS 5 #define MATRIX_COLS 15 diff --git a/keyboards/unikorn/usbconfig.h b/keyboards/unikorn/usbconfig.h index 3dcd1ccde..a3aa0f7c8 100644 --- a/keyboards/unikorn/usbconfig.h +++ b/keyboards/unikorn/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 's', 'i', 'n', 'g', 'a', 't', 'g', 'r' -#define USB_CFG_VENDOR_NAME_LEN 8 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'u', 'n', 'i', 'k', 'o', 'r', 'n' -#define USB_CFG_DEVICE_NAME_LEN 7 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/winkeyless/bface/config.h b/keyboards/winkeyless/bface/config.h index 68ecaafc1..0ef8a42b6 100644 --- a/keyboards/winkeyless/bface/config.h +++ b/keyboards/winkeyless/bface/config.h @@ -21,10 +21,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -// You can edit those at usbconfig.h about line 250. These values will -// unforunatly be ignored so far -#define MANUFACTURER winkeyless.kr -#define PRODUCT b.face +#define MANUFACTURER Winkeyless +#define PRODUCT B.face /* matrix size */ #define MATRIX_ROWS 8 diff --git a/keyboards/winkeyless/bface/usbconfig.h b/keyboards/winkeyless/bface/usbconfig.h index 5ff26399b..a3aa0f7c8 100644 --- a/keyboards/winkeyless/bface/usbconfig.h +++ b/keyboards/winkeyless/bface/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'b', '.', 'f', 'a', 'c', 'e' -#define USB_CFG_DEVICE_NAME_LEN 6 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/winkeyless/bmini/config.h b/keyboards/winkeyless/bmini/config.h index 6d46cdecb..ccce0b6c8 100644 --- a/keyboards/winkeyless/bmini/config.h +++ b/keyboards/winkeyless/bmini/config.h @@ -22,7 +22,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -#define MANUFACTURER winkeyless.kr +#define MANUFACTURER Winkeyless #define PRODUCT B.mini #define RGBLED_NUM 16 diff --git a/keyboards/winkeyless/bmini/usbconfig.h b/keyboards/winkeyless/bmini/usbconfig.h index 85a915bb4..ad9c95c5d 100644 --- a/keyboards/winkeyless/bmini/usbconfig.h +++ b/keyboards/winkeyless/bmini/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/winkeyless/bminiex/config.h b/keyboards/winkeyless/bminiex/config.h index 2da785214..6e35c9e82 100644 --- a/keyboards/winkeyless/bminiex/config.h +++ b/keyboards/winkeyless/bminiex/config.h @@ -22,8 +22,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422E #define DEVICE_VER 0x0200 -#define MANUFACTURER winkeyless.kr -#define PRODUCT B.mini Ex +#define MANUFACTURER Winkeyless +#define PRODUCT B.mini EX #define RGBLED_NUM 20 diff --git a/keyboards/winkeyless/bminiex/usbconfig.h b/keyboards/winkeyless/bminiex/usbconfig.h index 85a915bb4..ad9c95c5d 100644 --- a/keyboards/winkeyless/bminiex/usbconfig.h +++ b/keyboards/winkeyless/bminiex/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/ymd75/config.h b/keyboards/ymd75/config.h index ef7171cae..8aa2bba41 100644 --- a/keyboards/ymd75/config.h +++ b/keyboards/ymd75/config.h @@ -24,11 +24,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 - -// TODO: share these strings with usbconfig.h -// Edit usbconfig.h to change these. #define MANUFACTURER YMDK -#define PRODUCT ymd75 / mt84 +#define PRODUCT YMD75 / MT84 #define DESCRIPTION 75% Keyboard /* matrix size */ diff --git a/keyboards/ymd75/usbconfig.h b/keyboards/ymd75/usbconfig.h index 0e570b9ec..ad9c95c5d 100644 --- a/keyboards/ymd75/usbconfig.h +++ b/keyboards/ymd75/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'Y', 'M', 'D', 'K' -#define USB_CFG_VENDOR_NAME_LEN 4 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'Y','M','D','7','5',' ','K','e','y','b','o','a','r','d' -#define USB_CFG_DEVICE_NAME_LEN 14 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/ymd96/config.h b/keyboards/ymd96/config.h index ebb60242b..6f50c7324 100644 --- a/keyboards/ymd96/config.h +++ b/keyboards/ymd96/config.h @@ -23,9 +23,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -// Edit usbconfig.h to change these. -#define MANUFACTURER ymdkey -#define PRODUCT ymd96 +#define MANUFACTURER YMDK +#define PRODUCT YMD96 /* matrix size */ #define MATRIX_ROWS 8 diff --git a/keyboards/ymd96/usbconfig.h b/keyboards/ymd96/usbconfig.h index 83613384d..ad9c95c5d 100644 --- a/keyboards/ymd96/usbconfig.h +++ b/keyboards/ymd96/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'y','m','d','k','e','y' -#define USB_CFG_VENDOR_NAME_LEN 6 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'y','m','d','9','6' -#define USB_CFG_DEVICE_NAME_LEN 5 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/ymdk/bface/config.h b/keyboards/ymdk/bface/config.h index 0c12c328e..dfcfbcaa1 100644 --- a/keyboards/ymdk/bface/config.h +++ b/keyboards/ymdk/bface/config.h @@ -20,10 +20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -// You can edit those at usbconfig.h about line 250. These values will -// unforunatly be ignored so far #define MANUFACTURER YMDK -#define PRODUCT bface +#define PRODUCT B.face /* matrix size */ #define MATRIX_ROWS 5 diff --git a/keyboards/ymdk/bface/usbconfig.h b/keyboards/ymdk/bface/usbconfig.h index 7768c5cae..a3aa0f7c8 100644 --- a/keyboards/ymdk/bface/usbconfig.h +++ b/keyboards/ymdk/bface/usbconfig.h @@ -230,31 +230,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'Y', 'M', 'D', 'K' -#define USB_CFG_VENDOR_NAME_LEN 4 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'b', 'f', 'a', 'c', 'e' -#define USB_CFG_DEVICE_NAME_LEN 5 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -336,11 +311,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC diff --git a/keyboards/ymdk_np21/config.h b/keyboards/ymdk_np21/config.h index 291e6a896..379663431 100644 --- a/keyboards/ymdk_np21/config.h +++ b/keyboards/ymdk_np21/config.h @@ -22,10 +22,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D #define DEVICE_VER 0x0200 -// TODO: share these strings with usbconfig.h -// Edit usbconfig.h to change these. -#define MANUFACTURER ymdk -#define PRODUCT np21 +#define MANUFACTURER YMDK +#define PRODUCT NP21 /* matrix size */ #define MATRIX_ROWS 4 diff --git a/keyboards/ymdk_np21/usbconfig.h b/keyboards/ymdk_np21/usbconfig.h index 4599c03dc..ad9c95c5d 100644 --- a/keyboards/ymdk_np21/usbconfig.h +++ b/keyboards/ymdk_np21/usbconfig.h @@ -231,31 +231,6 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'j', 'j', '4', '0' -#define USB_CFG_DEVICE_NAME_LEN 4 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ #define USB_CFG_DEVICE_CLASS 0 #define USB_CFG_DEVICE_SUBCLASS 0 /* See USB specification if you want to conform to an existing device class. @@ -337,11 +312,11 @@ section at the end of this file). #define USB_CFG_DESCR_PROPS_DEVICE 0 #define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC #define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC //#define USB_CFG_DESCR_PROPS_HID 0 #define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC |