diff options
Diffstat (limited to 'keyboards/satan/readme.md')
| -rw-r--r-- | keyboards/satan/readme.md | 33 |
1 files changed, 0 insertions, 33 deletions
diff --git a/keyboards/satan/readme.md b/keyboards/satan/readme.md deleted file mode 100644 index 7eb272cf3..000000000 --- a/keyboards/satan/readme.md +++ /dev/null @@ -1,33 +0,0 @@ -# Satan GH60 - -A clone of the GH60 60% keyboard, with full backlighting support. - -Keyboard Maintainer: QMK Community -Hardware Supported: Satan GH60 PCB -Hardware Availability: https://www.1upkeyboards.com/shop/controllers/gh60-satan-pcb/ - -Make example for this keyboard (after setting up your build environment): - - make satan:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -## RGB Underglow (WS2812B LED Strip) - -This board also supports underglow with a slight mod. - -Connect the DIN pad of the LED strip to PE2 on the ATmega32U4, like so: - - - -Then connect VCC and GND to pins 1 and 6 at the bottom of the PCB: - - - -## ISP Header - -If you want to flash another bootloader (such as QMK-DFU), or can't get into the bootloader in the first place, the row of pins at the bottom can be used to ISP flash the board: - -| 1 | 2 | 3 | 4 | 5 | 6 | 7 | -|---|----|---|----|-----|---|----| -|VCC|MISO|SCK|MOSI|RESET|GND|*NC*| |