aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/meira/rules.mk
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/meira/rules.mk')
-rw-r--r--keyboards/meira/rules.mk84
1 files changed, 84 insertions, 0 deletions
diff --git a/keyboards/meira/rules.mk b/keyboards/meira/rules.mk
new file mode 100644
index 000000000..fa80ca9d4
--- /dev/null
+++ b/keyboards/meira/rules.mk
@@ -0,0 +1,84 @@
+SRC += matrix.c TWIlib.c issi.c lighting.c
+
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no # Audio output on port C6
+RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches
+
+ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled
+#WATCHDOG_ENABLE = yes # Resets keyboard if matrix_scan isn't run every 250ms
+
+CUSTOM_MATRIX = yes
+
+ifeq ($(strip $(ISSI_ENABLE)), yes)
+ TMK_COMMON_DEFS += -DISSI_ENABLE
+endif
+
+ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
+ TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
+endif