diff options
Diffstat (limited to 'keyboards/hhkb')
| -rw-r--r-- | keyboards/hhkb/Makefile | 90 | ||||
| -rw-r--r-- | keyboards/hhkb/config.h | 75 | ||||
| -rw-r--r-- | keyboards/hhkb/hhkb.c | 1 | ||||
| -rw-r--r-- | keyboards/hhkb/hhkb.h | 51 | ||||
| -rw-r--r-- | keyboards/hhkb/hhkb_avr.h | 167 | ||||
| -rw-r--r-- | keyboards/hhkb/keymaps/default/keymap.c | 78 | ||||
| -rw-r--r-- | keyboards/hhkb/keymaps/jp/Makefile | 1 | ||||
| -rw-r--r-- | keyboards/hhkb/keymaps/jp/keymap.c | 58 | ||||
| -rw-r--r-- | keyboards/hhkb/keymaps/lxol/keymap.c | 208 | ||||
| -rw-r--r-- | keyboards/hhkb/keymaps/rdg_jp/Makefile | 1 | ||||
| -rw-r--r-- | keyboards/hhkb/keymaps/rdg_jp/keymap.c | 65 | ||||
| -rw-r--r-- | keyboards/hhkb/matrix.c | 215 | ||||
| -rw-r--r-- | keyboards/hhkb/readme.md | 180 |
13 files changed, 1190 insertions, 0 deletions
diff --git a/keyboards/hhkb/Makefile b/keyboards/hhkb/Makefile new file mode 100644 index 000000000..6fe973e1e --- /dev/null +++ b/keyboards/hhkb/Makefile @@ -0,0 +1,90 @@ + + +# project specific files +SRC = matrix.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +#OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# as per original hasu settings +OPT_DEFS += -DBOOTLOADER_SIZE=512 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + + + +ifndef QUANTUM_DIR + include ../../Makefile +endif + +ifneq (, $(findstring yes, $(HHKB_JP))) + OPT_DEFS += -DHHKB_JP +endif + +debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION +debug-on: all + +debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT +debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS)) +debug-off: all diff --git a/keyboards/hhkb/config.h b/keyboards/hhkb/config.h new file mode 100644 index 000000000..3f0528b4b --- /dev/null +++ b/keyboards/hhkb/config.h @@ -0,0 +1,75 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xCAFE +#define DEVICE_VER 0x0104 +#define MANUFACTURER q.m.k +#define PRODUCT HHKB mod +#define DESCRIPTION q.m.k keyboard firmware for HHKB + +/* key matrix size */ +#ifdef HHKB_JP +# define MATRIX_ROWS 16 +#else +# define MATRIX_ROWS 8 +#endif +#define MATRIX_COLS 8 + +#define TAPPING_TERM 200 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. +*/ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/hhkb/hhkb.c b/keyboards/hhkb/hhkb.c new file mode 100644 index 000000000..a9d35123f --- /dev/null +++ b/keyboards/hhkb/hhkb.c @@ -0,0 +1 @@ +#include "hhkb.h"
\ No newline at end of file diff --git a/keyboards/hhkb/hhkb.h b/keyboards/hhkb/hhkb.h new file mode 100644 index 000000000..e95125efc --- /dev/null +++ b/keyboards/hhkb/hhkb.h @@ -0,0 +1,51 @@ +#ifndef HHKB_H +#define HHKB_H + +#include "quantum.h" + +#define KEYMAP( \ + K31, K30, K00, K10, K11, K20, K21, K40, K41, K60, K61, K70, K71, K50, K51, \ + K32, K01, K02, K13, K12, K23, K22, K42, K43, K62, K63, K73, K72, K52, \ + K33, K04, K03, K14, K15, K24, K25, K45, K44, K65, K64, K74, K53, \ + K34, K05, K06, K07, K16, K17, K26, K46, K66, K76, K75, K55, K54, \ + K35, K36, K37, K57, K56) \ + \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, KC_NO }, \ + { K50, K51, K52, K53, K54, K55, K56, K57 }, \ + { K60, K61, K62, K63, K64, K65, K66, KC_NO }, \ + { K70, K71, K72, K73, K74, K75, K76, KC_NO } \ +} + + +#define KEYMAP_JP( \ + K02, K32, K62, K22, K12, K52, K72, KA2, K92, K82, KB2, KE2, KF2, KD2, KC2, \ + K03, K63, K23, K13, K53, K73, KA3, K93, K83, KB3, KE3, KF3, KD3, \ + K06, K66, K26, K16, K56, K76, KA6, K96, K86, KB6, KE6, KF6, KD6, KC6, \ + K05, K65, K25, K15, K55, K75, KA5, K95, K85, KB5, KE5, KF5, KD5, KC5, \ + K04, K34, K64, K24, K14, K74, K94, K84, KB4, KE4, KF4, KD4, KC4) \ +{ \ + { KC_NO, KC_NO, K02, K03, K04, K05, K06, KC_NO }, \ + { KC_NO, KC_NO, K12, K13, K14, K15, K16, KC_NO }, \ + { KC_NO, KC_NO, K22, K23, K24, K25, K26, KC_NO }, \ + { KC_NO, KC_NO, K32, KC_NO, K34, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, K52, K53, KC_NO, K55, K56, KC_NO }, \ + { KC_NO, KC_NO, K62, K63, K64, K65, K66, KC_NO }, \ + { KC_NO, KC_NO, K72, K73, K74, K75, K76, KC_NO }, \ + { KC_NO, KC_NO, K82, K83, K84, K85, K86, KC_NO }, \ + { KC_NO, KC_NO, K92, K93, K94, K95, K96, KC_NO }, \ + { KC_NO, KC_NO, KA2, KA3, KC_NO, KA5, KA6, KC_NO }, \ + { KC_NO, KC_NO, KB2, KB3, KB4, KB5, KB6, KC_NO }, \ + { KC_NO, KC_NO, KC2, KC_NO, KC4, KC5, KC6, KC_NO }, \ + { KC_NO, KC_NO, KD2, KD3, KD4, KD5, KD6, KC_NO }, \ + { KC_NO, KC_NO, KE2, KE3, KE4, KE5, KE6, KC_NO }, \ + { KC_NO, KC_NO, KF2, KF3, KF4, KF5, KF6, KC_NO } \ +} + + +#endif diff --git a/keyboards/hhkb/hhkb_avr.h b/keyboards/hhkb/hhkb_avr.h new file mode 100644 index 000000000..7ea6322c7 --- /dev/null +++ b/keyboards/hhkb/hhkb_avr.h @@ -0,0 +1,167 @@ +#ifndef HHKB_AVR_H +#define HHKB_AVR_H + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <avr/interrupt.h> +#include <util/delay.h> + + +// Timer resolution check +#if (1000000/TIMER_RAW_FREQ > 20) +# error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB." +#endif + + +/* + * HHKB Matrix I/O + * + * row: HC4051[A,B,C] selects scan row0-7 + * row-ext: [En0,En1] row extention for JP + * col: LS145[A,B,C,D] selects scan col0-7 and enable(D) + * key: on: 0/off: 1 + * prev: hysteresis control: assert(1) when previous key state is on + */ + + +#if defined(__AVR_ATmega32U4__) +/* + * For TMK HHKB alt controller(ATMega32U4) + * + * row: PB0-2 + * col: PB3-5,6 + * key: PD7(pull-uped) + * prev: PB7 + * power: PD4(L:off/H:on) + * row-ext: PC6,7 for HHKB JP(active low) + */ +static inline void KEY_ENABLE(void) { (PORTB &= ~(1<<6)); } +static inline void KEY_UNABLE(void) { (PORTB |= (1<<6)); } +static inline bool KEY_STATE(void) { return (PIND & (1<<7)); } +static inline void KEY_PREV_ON(void) { (PORTB |= (1<<7)); } +static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); } +#ifdef HHKB_POWER_SAVING +static inline void KEY_POWER_ON(void) { + DDRB = 0xFF; PORTB = 0x40; // change pins output + DDRD |= (1<<4); PORTD |= (1<<4); // MOS FET switch on + /* Without this wait you will miss or get false key events. */ + _delay_ms(5); // wait for powering up +} +static inline void KEY_POWER_OFF(void) { + /* input with pull-up consumes less than without it when pin is open. */ + DDRB = 0x00; PORTB = 0xFF; // change pins input with pull-up + DDRD |= (1<<4); PORTD &= ~(1<<4); // MOS FET switch off +} +static inline bool KEY_POWER_STATE(void) { return PORTD & (1<<4); } +#else +static inline void KEY_POWER_ON(void) {} +static inline void KEY_POWER_OFF(void) {} +static inline bool KEY_POWER_STATE(void) { return true; } +#endif +static inline void KEY_INIT(void) +{ + /* row,col,prev: output */ + DDRB = 0xFF; + PORTB = 0x40; // unable + /* key: input with pull-up */ + DDRD &= ~0x80; + PORTD |= 0x80; +#ifdef HHKB_JP + /* row extention for HHKB JP */ + DDRC |= (1<<6|1<<7); + PORTC |= (1<<6|1<<7); +#endif + KEY_UNABLE(); + KEY_PREV_OFF(); + + KEY_POWER_OFF(); +} +static inline void KEY_SELECT(uint8_t ROW, uint8_t COL) +{ + PORTB = (PORTB & 0xC0) | (((COL) & 0x07)<<3) | ((ROW) & 0x07); +#ifdef HHKB_JP + if ((ROW) & 0x08) PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<6); + else PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<7); +#endif +} + + +#elif defined(__AVR_AT90USB1286__) +/* + * For Teensy++(AT90USB1286) + * + * HHKB pro HHKB pro2 + * row: PB0-2 (6-8) (5-7) + * col: PB3-5,6 (9-12) (8-11) + * key: PE6(pull-uped) (4) (3) + * prev: PE7 (5) (4) + * + * TODO: convert into 'staitc inline' function + */ +#define KEY_INIT() do { \ + DDRB |= 0x7F; \ + DDRE |= (1<<7); \ + DDRE &= ~(1<<6); \ + PORTE |= (1<<6); \ +} while (0) +#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \ + (((COL) & 0x07)<<3) | \ + ((ROW) & 0x07)) +#define KEY_ENABLE() (PORTB &= ~(1<<6)) +#define KEY_UNABLE() (PORTB |= (1<<6)) +#define KEY_STATE() (PINE & (1<<6)) +#define KEY_PREV_ON() (PORTE |= (1<<7)) +#define KEY_PREV_OFF() (PORTE &= ~(1<<7)) +#define KEY_POWER_ON() +#define KEY_POWER_OFF() +#define KEY_POWER_STATE() true + + +#else +# error "define code for matrix scan" +#endif + + +#if 0 +// For ATMega328P with V-USB +// +// #elif defined(__AVR_ATmega328P__) +// Ports for V-USB +// key: PB0(pull-uped) +// prev: PB1 +// row: PB2-4 +// col: PC0-2,3 +// power: PB5(Low:on/Hi-z:off) +#define KEY_INIT() do { \ + DDRB |= 0x3E; \ + DDRB &= ~(1<<0); \ + PORTB |= 1<<0; \ + DDRC |= 0x0F; \ + KEY_UNABLE(); \ + KEY_PREV_OFF(); \ +} while (0) +#define KEY_SELECT(ROW, COL) do { \ + PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \ + PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \ +} while (0) +#define KEY_ENABLE() (PORTC &= ~(1<<3)) +#define KEY_UNABLE() (PORTC |= (1<<3)) +#define KEY_STATE() (PINB & (1<<0)) +#define KEY_PREV_ON() (PORTB |= (1<<1)) +#define KEY_PREV_OFF() (PORTB &= ~(1<<1)) +// Power supply switching +#define KEY_POWER_ON() do { \ + KEY_INIT(); \ + PORTB &= ~(1<<5); \ + _delay_ms(1); \ +} while (0) +#define KEY_POWER_OFF() do { \ + DDRB &= ~0x3F; \ + PORTB &= ~0x3F; \ + DDRC &= ~0x0F; \ + PORTC &= ~0x0F; \ +} while (0) +#endif + +#endif diff --git a/keyboards/hhkb/keymaps/default/keymap.c b/keyboards/hhkb/keymaps/default/keymap.c new file mode 100644 index 000000000..bd5dd8372 --- /dev/null +++ b/keyboards/hhkb/keymaps/default/keymap.c @@ -0,0 +1,78 @@ +/* -*- eval: (turn-on-orgtbl); -*- + * default HHKB Layout + */ +#include "hhkb.h" + +#define BASE 0 +#define HHKB 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* BASE Level: Default Layer + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Cont | A | S | D | F | G | H | J | K | L | ; | ' | Ent | | | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Fn0 | | | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + + |------+------+-----------------------+------+------| + | LAlt | LGUI | ******* Space ******* | RGUI | RAlt | + |------+------+-----------------------+------+------| + */ + + [BASE] = KEYMAP( // default layer + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(HHKB), \ + KC_LALT, KC_LGUI, /* */ KC_SPC, KC_RGUI, KC_RALT), + + + + /* Layer HHKB: HHKB mode (HHKB Fn) + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | Pwr | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | Caps | | | | | | | | Psc | Slk | Pus | Up | | Backs | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | | VoD | VoU | Mut | | | * | / | Hom | PgU | Lef | Rig | Enter | | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | | | | | | | + | - | End | PgD | Dow | | | | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + + |------+------+----------------------+------+------+ + | **** | **** | ******************** | **** | **** | + |------+------+----------------------+------+------+ + + */ + + [HHKB] = KEYMAP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_BSPC, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)}; + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/hhkb/keymaps/jp/Makefile b/keyboards/hhkb/keymaps/jp/Makefile new file mode 100644 index 000000000..92986292a --- /dev/null +++ b/keyboards/hhkb/keymaps/jp/Makefile @@ -0,0 +1 @@ +HHKB_JP=yes diff --git a/keyboards/hhkb/keymaps/jp/keymap.c b/keyboards/hhkb/keymaps/jp/keymap.c new file mode 100644 index 000000000..8525adce5 --- /dev/null +++ b/keyboards/hhkb/keymaps/jp/keymap.c @@ -0,0 +1,58 @@ +#include "hhkb.h" + +#define _______ KC_TRNS + + +/* Layer 0: HHKB JP + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10| -| =|Yen|Bsp| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | + * |------------------------------------------------------` Ent| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| `| | + * |-----------------------------------------------------------| + * |Shft | Z| X| C| V| B| N| M| ,| .| /| \| Up|Sft| + * |-----------------------------------------------------------| + * | ||Ctl|Alt|Cmd| | Spc |Bsp| | | ||Lft|Dwn|Rgh| + * `-----------------------------------------------------------' + */ + +/* Layer 1: HHKB mode (HHKB Fn) + * ,-----------------------------------------------------------. + * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Caps | | | | | | | |Psc|Slk|Pus|Up | | | + * |------------------------------------------------------` | + * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig| | | + * |-----------------------------------------------------------| + * | | | | | | | +| -|End|PgD|Dow| | | | + * |-----------------------------------------------------------| + * | || | | | | | | | | || | | | + * `-----------------------------------------------------------' + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP_JP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_UP, KC_RSFT, + MO(1), KC_ZKHK, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_HENK, KC_KANA, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = KEYMAP_JP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, + _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT, + _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, + _______, _______, _______, _______, _______, _______ , _______, _______, _______, _______, _______, _______, _______ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) { + return MACRO_NONE; +} + +const uint16_t PROGMEM fn_actions[] = { + +}; diff --git a/keyboards/hhkb/keymaps/lxol/keymap.c b/keyboards/hhkb/keymaps/lxol/keymap.c new file mode 100644 index 000000000..ccf1e0704 --- /dev/null +++ b/keyboards/hhkb/keymaps/lxol/keymap.c @@ -0,0 +1,208 @@ +/* -*- eval: (turn-on-orgtbl); -*- + * lxol HHKB Layout + */ +#include "hhkb.h" + +#define BASE 0 +#define WIN 1 +#define HHKB 2 +#define RGUILEV 3 +#define LGUILEV 4 +#define RALTLEV 5 +#define LALTLEV 6 + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Layer 0: Default Layer + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Contro | A | S | D | F | G | H | J | K | L | ; | ' | RCtl/Ent | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | Fn2 | Shift | Fn0 | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + + |------+------+-------+------+------| + | LAlt | LGUI | Space | RGUI | RAlt | + |------+------+-------+------+------| + */ + + [BASE] = KEYMAP( // layer 0 : default + + + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, LT(LALTLEV,KC_A), LT(LGUILEV,KC_S), KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, LT(RGUILEV,KC_L), LT(RALTLEV,KC_SCLN), KC_QUOT, KC_FN0, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(HHKB), \ + KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT), + + + + /* Layer 1: HHKB mode (HHKB Fn) + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | Pwr | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | Caps | | | | | | | | Psc | Slk | Pus | Up | | Backs | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | | VoD | VoU | Mut | | | * | / | Hom | PgU | Lef | Rig | Enter | | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | | | | | | | + | - | End | PgD | Dow | | | | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + + |---+---+---+---+---| + | | | | | | + |---+---+---+---+---| + */ + + [HHKB] = KEYMAP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_BSPC, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + + /* Layer LGUI: All keys with RGUI modifier + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Contro | A | S | D | F | G | H | J | K | | ; | ' | RCtl/Ent | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | Fn2 | Shift | Fn0 | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + + |------+------+-------+------+------| + | LAlt | LGUI | Space | RGUI | RAlt | + |------+------+-------+------+------| + */ + + [RGUILEV] = KEYMAP( // Right GUI layer by KC_L + + RGUI(KC_ESC), RGUI(KC_1), RGUI(KC_2), RGUI(KC_3), RGUI(KC_4), RGUI(KC_5), RGUI(KC_6), RGUI(KC_7), RGUI(KC_8), RGUI(KC_9), RGUI(KC_0), RGUI(KC_MINS), RGUI(KC_EQL), RGUI(KC_BSLS), RGUI(KC_GRV), \ + RGUI(KC_TAB), RGUI(KC_Q), RGUI(KC_W), RGUI(KC_E), RGUI(KC_R), RGUI(KC_T), RGUI(KC_Y), RGUI(KC_U), RGUI(KC_I), RGUI(KC_O), RGUI(KC_P), RGUI(KC_LBRC), RGUI(KC_RBRC), RGUI(KC_BSPC), \ + RGUI(KC_LCTL), RGUI(KC_A), RGUI(KC_S), RGUI(KC_D), RGUI(KC_F), RGUI(KC_G), RGUI(KC_H), RGUI(KC_J), RGUI(KC_K), KC_TRNS, KC_TRNS, RGUI(KC_QUOT), KC_FN0, \ + RGUI(KC_LSFT), RGUI(KC_Z), RGUI(KC_X), RGUI(KC_C), RGUI(KC_V), RGUI(KC_B), RGUI(KC_N), RGUI(KC_M), RGUI(KC_COMM), RGUI(KC_DOT), RGUI(KC_SLSH), RGUI(KC_RSFT), KC_TRNS, \ + KC_LALT, KC_LGUI, RGUI(KC_SPC), KC_RGUI, KC_RALT), + + /* Layer LGUI: All keys with LGUI modifier + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Contro | A | S | D | F | G | H | J | K | | ; | ' | RCtl/Ent | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | Fn2 | Shift | Fn0 | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + + |------+------+-------+------+------| + | LAlt | LGUI | Space | LGUI | RAlt | + |------+------+-------+------+------| + */ + + [LGUILEV] = KEYMAP( // Right GUI layer by KC_L + + LGUI(KC_ESC), LGUI(KC_1), LGUI(KC_2), LGUI(KC_3), LGUI(KC_4), LGUI(KC_5), LGUI(KC_6), LGUI(KC_7), LGUI(KC_8), LGUI(KC_9), LGUI(KC_0), LGUI(KC_MINS), LGUI(KC_EQL), LGUI(KC_BSLS), LGUI(KC_GRV), \ + LGUI(KC_TAB), LGUI(KC_Q), LGUI(KC_W), LGUI(KC_E), LGUI(KC_R), LGUI(KC_T), LGUI(KC_Y), LGUI(KC_U), LGUI(KC_I), LGUI(KC_O), LGUI(KC_P), LGUI(KC_LBRC), LGUI(KC_RBRC), LGUI(KC_BSPC), \ + LGUI(KC_LCTL), KC_TRNS, KC_TRNS, LGUI(KC_D), LGUI(KC_F), LGUI(KC_G), LGUI(KC_H), LGUI(KC_J), LGUI(KC_K), LGUI(KC_L), LGUI(KC_SCLN), LGUI(KC_QUOT), KC_FN0, \ + KC_LSFT, LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V), LGUI(KC_B), LGUI(KC_N), LGUI(KC_M), LGUI(KC_COMM), LGUI(KC_DOT), LGUI(KC_SLSH), KC_RSFT, KC_TRNS, \ + KC_LALT, KC_LGUI, LGUI(KC_SPC), KC_LGUI, KC_RALT), + + /* Layer LALT: All keys with RALT modifier + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Contro | A | S | D | F | G | H | J | K | | ; | ' | RCtl/Ent | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | Fn2 | Shift | Fn0 | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + + |------+------+-------+------+------| + | LAlt | LGUI | Space | RGUI | RAlt | + |------+------+-------+------+------| + */ + + [RALTLEV] = KEYMAP( // Right ALT layer by KC_L + + RALT(KC_ESC), RALT(KC_1), RALT(KC_2), RALT(KC_3), RALT(KC_4), RALT(KC_5), RALT(KC_6), RALT(KC_7), RALT(KC_8), RALT(KC_9), RALT(KC_0), RALT(KC_MINS), RALT(KC_EQL), RALT(KC_BSLS), RALT(KC_GRV), \ + RALT(KC_TAB), RALT(KC_Q), RALT(KC_W), RALT(KC_E), RALT(KC_R), RALT(KC_T), RALT(KC_Y), RALT(KC_U), RALT(KC_I), RALT(KC_O), RALT(KC_P), RALT(KC_LBRC), RALT(KC_RBRC), RALT(KC_BSPC), \ + RALT(KC_LCTL), RALT(KC_A), RALT(KC_S), RALT(KC_D), RALT(KC_F), RALT(KC_G), RALT(KC_H), RALT(KC_J), RALT(KC_K), KC_TRNS, KC_TRNS, RALT(KC_QUOT), KC_FN0, \ + RALT(KC_LSFT), RALT(KC_Z), RALT(KC_X), RALT(KC_C), RALT(KC_V), RALT(KC_B), RALT(KC_N), RALT(KC_M), RALT(KC_COMM), RALT(KC_DOT), RALT(KC_SLSH), RALT(KC_RSFT), KC_TRNS, \ + KC_LALT, KC_LGUI, RALT(KC_SPC), KC_RGUI, KC_RALT), + + /* Layer LALT: All keys with LALT modifier + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Contro | A | S | D | F | G | H | J | K | | ; | ' | RCtl/Ent | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | Fn2 | Shift | Fn0 | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + + |------+------+-------+------+------| + | LAlt | LGUI | Space | LGUI | RAlt | + |------+------+-------+------+------| + */ + + [LALTLEV] = KEYMAP( // Right ALT layer by KC_L + + LALT(KC_ESC), LALT(KC_1), LALT(KC_2), LALT(KC_3), LALT(KC_4), LALT(KC_5), LALT(KC_6), LALT(KC_7), LALT(KC_8), LALT(KC_9), LALT(KC_0), LALT(KC_MINS), LALT(KC_EQL), LALT(KC_BSLS), LALT(KC_GRV), \ + LALT(KC_TAB), LALT(KC_Q), LALT(KC_W), LALT(KC_E), LALT(KC_R), LALT(KC_T), LALT(KC_Y), LALT(KC_U), LALT(KC_I), LALT(KC_O), LALT(KC_P), LALT(KC_LBRC), LALT(KC_RBRC), LALT(KC_BSPC), \ + LALT(KC_LCTL), KC_TRNS, KC_TRNS, LALT(KC_D), LALT(KC_F), LALT(KC_G), LALT(KC_H), LALT(KC_J), LALT(KC_K), LALT(KC_L), LALT(KC_SCLN), LALT(KC_QUOT), KC_FN0, \ + KC_LSFT, LALT(KC_Z), LALT(KC_X), LALT(KC_C), LALT(KC_V), LALT(KC_B), LALT(KC_N), LALT(KC_M), LALT(KC_COMM), LALT(KC_DOT), LALT(KC_SLSH), KC_RSFT, KC_TRNS, \ + KC_LALT, KC_LGUI, LALT(KC_SPC), KC_LGUI, KC_RALT), + + + /* Layer WIN: Win layer + |--------+---+---+---+---+---+---+---+---+---+---+-------+----------+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |--------+---+---+---+---+---+---+---+---+---+---+-------+----------+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |--------+---+---+---+---+---+---+---+---+---+---+-------+----------+-------+---| + | Contro | A | S | D | F | G | H | J | K | L | ; | ' | RCtl/Ent | | | + |--------+---+---+---+---+---+---+---+---+---+---+-------+----------+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Fn0 | | | + |--------+---+---+---+---+---+---+---+---+---+---+-------+----------+-------+---| + + |------+------+-------+------+------| + | LGui | LAlt | Space | RGui | Ralt | + |------+------+-------+------+------| + */ + + [WIN] = KEYMAP( // BASE level with swapped GUI/ALT + + + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, LT(LGUILEV,KC_A), LT(LALTLEV,KC_S), KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, LT(RALTLEV,KC_L), LT(RGUILEV,KC_SCLN), KC_QUOT, KC_FN0, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(HHKB), \ + KC_RGUI, KC_RALT, KC_SPC, KC_RALT, KC_RGUI)}; + + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENT) // RControl with tap Enter* +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/hhkb/keymaps/rdg_jp/Makefile b/keyboards/hhkb/keymaps/rdg_jp/Makefile new file mode 100644 index 000000000..92986292a --- /dev/null +++ b/keyboards/hhkb/keymaps/rdg_jp/Makefile @@ -0,0 +1 @@ +HHKB_JP=yes diff --git a/keyboards/hhkb/keymaps/rdg_jp/keymap.c b/keyboards/hhkb/keymaps/rdg_jp/keymap.c new file mode 100644 index 000000000..700ba3a0b --- /dev/null +++ b/keyboards/hhkb/keymaps/rdg_jp/keymap.c @@ -0,0 +1,65 @@ +#include "hhkb.h" + +#define _______ KC_TRNS + +enum { + ZER, + HDN, + OSY +}; + + +#define CTL_ESC CTL_T(KC_ESC) +#define SFT_BSP SFT_T(KC_BSPC) + +#define SCRNS3 LGUI(LCTL(LSFT(KC_3))) +#define SCRNS4 LGUI(LCTL(LSFT(KC_4))) + + +/* hhkb jp ~ layout + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10| -| =|Yen|Bsp| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | + * |------------------------------------------------------` Ent| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| `| | + * |-----------------------------------------------------------| + * |Shft | Z| X| C| V| B| N| M| ,| .| /| \| Up|Sft| + * |-----------------------------------------------------------| + * | ||Ctl|Alt|Cmd| | Spc |Bsp| | | ||Lft|Dwn|Rgh| + * `-----------------------------------------------------------' + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [ZER] = KEYMAP_JP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_INS, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_GRV, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT, + MO(HDN), KC_LCTL, KC_LALT, KC_LGUI, MO(HDN), KC_SPC, SFT_BSP, MO(HDN), MO(OSY), KC_NO, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [HDN] = KEYMAP_JP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, + _______, KC_TILD, KC_GRV, KC_BSLS, KC_PIPE, KC_MINS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TILD, KC_GRV, _______, _______, + _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, _______, KC_ENT, _______, _______, _______, _______, KC_PGUP, _______, + _______, _______, _______, _______, _______, KC_UNDS , KC_DEL, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), + + [OSY] = KEYMAP_JP( + _______, _______, _______, SCRNS3, SCRNS4, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______ , _______, _______, _______, _______, _______, _______, _______ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) { + return MACRO_NONE; +} + +const uint16_t PROGMEM fn_actions[] = { + +}; diff --git a/keyboards/hhkb/matrix.c b/keyboards/hhkb/matrix.c new file mode 100644 index 000000000..666b6f595 --- /dev/null +++ b/keyboards/hhkb/matrix.c @@ -0,0 +1,215 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "timer.h" +#include "matrix.h" +#include "hhkb_avr.h" +#include <avr/wdt.h> +#include "suspend.h" +#include "lufa.h" + + +// matrix power saving +#define MATRIX_POWER_SAVE 10000 +static uint32_t matrix_last_modified = 0; + +// matrix state buffer(1:on, 0:off) +static matrix_row_t *matrix; +static matrix_row_t *matrix_prev; +static matrix_row_t _matrix0[MATRIX_ROWS]; +static matrix_row_t _matrix1[MATRIX_ROWS]; + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ +#ifdef DEBUG + debug_enable = true; + debug_keyboard = true; +#endif + + KEY_INIT(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00; + for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00; + matrix = _matrix0; + matrix_prev = _matrix1; +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +uint8_t matrix_scan(void) +{ + uint8_t *tmp; + + tmp = matrix_prev; + matrix_prev = matrix; + matrix = tmp; + + // power on + if (!KEY_POWER_STATE()) KEY_POWER_ON(); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + KEY_SELECT(row, col); + _delay_us(5); + + // Not sure this is needed. This just emulates HHKB controller's behaviour. + if (matrix_prev[row] & (1<<col)) { + KEY_PREV_ON(); + } + _delay_us(10); + + // NOTE: KEY_STATE is valid only in 20us after KEY_ENABLE. + // If V-USB interrupts in this section we could lose 40us or so + // and would read invalid value from KEY_STATE. + uint8_t last = TIMER_RAW; + + KEY_ENABLE(); + + // Wait for KEY_STATE outputs its value. + // 1us was ok on one HHKB, but not worked on another. + // no wait doesn't work on Teensy++ with pro(1us works) + // no wait does work on tmk PCB(8MHz) with pro2 + // 1us wait does work on both of above + // 1us wait doesn't work on tmk(16MHz) + // 5us wait does work on tmk(16MHz) + // 5us wait does work on tmk(16MHz/2) + // 5us wait does work on tmk(8MHz) + // 10us wait does work on Teensy++ with pro + // 10us wait does work on 328p+iwrap with pro + // 10us wait doesn't work on tmk PCB(8MHz) with pro2(very lagged scan) + _delay_us(5); + + if (KEY_STATE()) { + matrix[row] &= ~(1<<col); + } else { + matrix[row] |= (1<<col); + } + + // Ignore if this code region execution time elapses more than 20us. + // MEMO: 20[us] * (TIMER_RAW_FREQ / 1000000)[count per us] + // MEMO: then change above using this rule: a/(b/c) = a*1/(b/c) = a*(c/b) + if (TIMER_DIFF_RAW(TIMER_RAW, last) > 20/(1000000/TIMER_RAW_FREQ)) { + matrix[row] = matrix_prev[row]; + } + + _delay_us(5); + KEY_PREV_OFF(); + KEY_UNABLE(); + + // NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE. + // This takes 25us or more to make sure KEY_STATE returns to idle state. +#ifdef HHKB_JP + // Looks like JP needs faster scan due to its twice larger matrix + // or it can drop keys in fast key typing + _delay_us(30); +#else + _delay_us(75); +#endif + } + if (matrix[row] ^ matrix_prev[row]) matrix_last_modified = timer_read32(); + } + // power off + if (KEY_POWER_STATE() && + (USB_DeviceState == DEVICE_STATE_Suspended || + USB_DeviceState == DEVICE_STATE_Unattached ) && + timer_elapsed32(matrix_last_modified) > MATRIX_POWER_SAVE) { + KEY_POWER_OFF(); + suspend_power_down(); + } + + matrix_scan_quantum(); + + return 1; +} + +bool matrix_is_modified(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + if (matrix[i] != matrix_prev[i]) + return true; + } + return false; +} + +inline +bool matrix_has_ghost(void) +{ + return false; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 01234567\n"); + for (uint8_t row = 0; row < matrix_rows(); row++) { + xprintf("%02X: %08b\n", row, bitrev(matrix_get_row(row))); + } +} + +uint8_t matrix_key_count(void) { + uint8_t count = 0; + for (int8_t r = MATRIX_ROWS - 1; r >= 0; --r) { + count += bitpop16(matrix_get_row(r)); + } + return count; +} + +void matrix_power_up(void) { + KEY_POWER_ON(); +} +void matrix_power_down(void) { + KEY_POWER_OFF(); +} diff --git a/keyboards/hhkb/readme.md b/keyboards/hhkb/readme.md new file mode 100644 index 000000000..39d49b32a --- /dev/null +++ b/keyboards/hhkb/readme.md @@ -0,0 +1,180 @@ +hhkb_qmk keyboard firmware +====================== + +## Quantum MK Firmware + +You have access to a bunch of goodies! Check out the Makefile to enable/disable some of the features. Uncomment the `#` to enable them. Setting them to `no` does nothing and will only confuse future you. + + BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality + MIDI_ENABLE = yes # MIDI controls + # UNICODE_ENABLE = yes # Unicode support - this is commented out, just as an example. You have to use #, not // + BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID + +## Quick aliases to common actions + +Your keymap can include shortcuts to common operations (called "function actions" in tmk). + +### Switching and toggling layers + +`MO(layer)` - momentary switch to *layer*. As soon as you let go of the key, the layer is deactivated and you pop back out to the previous layer. When you apply this to a key, that same key must be set as `KC_TRNS` on the destination layer. Otherwise, you won't make it back to the original layer when you release the key (and you'll get a keycode sent). You can only switch to layers *above* your current layer. If you're on layer 0 and you use `MO(1)`, that will switch to layer 1 just fine. But if you include `MO(3)` on layer 5, that won't do anything for you -- because layer 3 is lower than layer 5 on the stack. + +`LT(layer, kc)` - momentary switch to *layer* when held, and *kc* when tapped. Like `MO()`, this only works upwards in the layer stack (`layer` must be higher than the current layer). + +`TG(layer)` - toggles a layer on or off. As with `MO()`, you should set this key as `KC_TRNS` in the destination layer so that tapping it again actually toggles back to the original layer. Only works upwards in the layer stack. + +### Fun with modifier keys + +* `LSFT(kc)` - applies left Shift to *kc* (keycode) - `S(kc)` is an alias +* `RSFT(kc)` - applies right Shift to *kc* +* `LCTL(kc)` - applies left Control to *kc* +* `RCTL(kc)` - applies right Control to *kc* +* `LALT(kc)` - applies left Alt to *kc* +* `RALT(kc)` - applies right Alt to *kc* +* `LGUI(kc)` - applies left GUI (command/win) to *kc* +* `RGUI(kc)` - applies right GUI (command/win) to *kc* + +You can also chain these, like this: + + LALT(LCTL(KC_DEL)) -- this makes a key that sends Alt, Control, and Delete in a single keypress. + +The following shortcuts automatically add `LSFT()` to keycodes to get commonly used symbols. Their long names are also available and documented in `/quantum/keymap_common.h`. + + KC_TILD ~ + KC_EXLM ! + KC_AT @ + KC_HASH # + KC_DLR $ + KC_PERC % + KC_CIRC ^ + KC_AMPR & + KC_ASTR * + KC_LPRN ( + KC_RPRN ) + KC_UNDS _ + KC_PLUS + + KC_LCBR { + KC_RCBR } + KC_PIPE | + KC_COLN : + +`MT(mod, kc)` - is *mod* (modifier key - MOD_LCTL, MOD_LSFT) when held, and *kc* when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down. + +These are the values you can use for the `mod` in `MT()` (right-hand modifiers are not available): + + * MOD_LCTL + * MOD_LSFT + * MOD_LALT + * MOD_LGUI + +These can also be combined like `MOD_LCTL | MOD_LSFT` e.g. `MT(MOD_LCTL | MOD_LSFT, KC_ESC)` which would activate Control and Shift when held, and send Escape when tapped. + +We've added shortcuts to make common modifier/tap (mod-tap) mappings more compact: + + * `CTL_T(kc)` - is LCTL when held and *kc* when tapped + * `SFT_T(kc)` - is LSFT when held and *kc* when tapped + * `ALT_T(kc)` - is LALT when held and *kc* when tapped + * `GUI_T(kc)` - is LGUI when held and *kc* when tapped + * `ALL_T(kc)` - is Hyper (all mods) when held and *kc* when tapped. To read more about what you can do with a Hyper key, see [this blog post by Brett Terpstra](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/) + +### Temporarily setting the default layer + +`DF(layer)` - sets default layer to *layer*. The default layer is the one at the "bottom" of the layer stack - the ultimate fallback layer. This currently does not persist over power loss. When you plug the keyboard back in, layer 0 will always be the default. It is theoretically possible to work around that, but that's not what `DF` does. + +### Remember: These are just aliases + +These functions work the same way that their `ACTION_*` functions do - they're just quick aliases. To dig into all of the tmk ACTION_* functions, please see the [TMK documentation](https://github.com/jackhumbert/qmk_firmware/blob/master/tmk_core/doc/keymap.md#2-action). + +Instead of using `FNx` when defining `ACTION_*` functions, you can use `F(x)` - the benefit here is being able to use more than 32 function actions (up to 4096), if you happen to need them. + +## Macro shortcuts: Send a whole string when pressing just one key + +Instead of using the `ACTION_MACRO` function, you can simply use `M(n)` to access macro *n* - *n* will get passed into the `action_get_macro` as the `id`, and you can use a switch statement to trigger it. This gets called on the keydown and keyup, so you'll need to use an if statement testing `record->event.pressed` (see keymap_default.c). + +```c +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is. +{ + switch(id) { + case 0: // this would trigger when you hit a key mapped as M(0) + if (record->event.pressed) { + return MACRO( I(255), T(H), T(E), T(L), T(L), W(255), T(O), END ); // this sends the string 'hello' when the macro executes + } + break; + } + return MACRO_NONE; +}; +``` +A macro can include the following commands: + +* I() change interval of stroke in milliseconds. +* D() press key. +* U() release key. +* T() type key(press and release). +* W() wait (milliseconds). +* END end mark. + +So above you can see the stroke interval changed to 255ms between each keystroke, then a bunch of keys being typed, waits a while, then the macro ends. + +Note: Using macros to have your keyboard send passwords for you is a bad idea. + +### Additional keycode aliases for software-implemented layouts (Colemak, Dvorak, etc) + +Everything is assuming you're in Qwerty (in software) by default, but there is built-in support for using a Colemak or Dvorak layout by including this at the top of your keymap: + + #include "keymap_<layout>.h" + +Where <layout> is "colemak" or "dvorak". After including this line, you will get access to: + + * `CM_*` for all of the Colemak-equivalent characters + * `DV_*` for all of the Dvorak-equivalent characters + +These implementations assume you're using Colemak or Dvorak on your OS, not on your keyboard - this is referred to as a software-implemented layout. If your computer is in Qwerty and your keymap is in Colemak or Dvorak, this is referred to as a firmware-implemented layout, and you won't need these features. + +To give an example, if you're using software-implemented Colemak, and want to get an `F`, you would use `CM_F` - `KC_F` under these same circumstances would result in `T`. + +## Additional language support + +In `quantum/keymap_extras/`, you'll see various language files - these work the same way as the alternative layout ones do. Most are defined by their two letter country/language code followed by an underscore and a 4-letter abbreviation of its name. `FR_UGRV` which will result in a `รน` when using a software-implemented AZERTY layout. It's currently difficult to send such characters in just the firmware (but it's being worked on - see Unicode support). + +## Unicode support + +You can currently send 4 hex digits with your OS-specific modifier key (RALT for OSX with the "Unicode Hex Input" layout) - this is currently limited to supporting one OS at a time, and requires a recompile for switching. 8 digit hex codes are being worked on. The keycode function is `UC(n)`, where *n* is a 4 digit hexidecimal. Enable from the Makefile. + +## Other firmware shortcut keycodes + +* `RESET` - puts the MCU in DFU mode for flashing new firmware (with `make dfu`) +* `DEBUG` - the firmware into debug mode - you'll need hid_listen to see things +* `BL_ON` - turns the backlight on +* `BL_OFF` - turns the backlight off +* `BL_<n>` - sets the backlight to level *n* +* `BL_INC` - increments the backlight level by one +* `BL_DEC` - decrements the backlight level by one +* `BL_TOGG` - toggles the backlight +* `BL_STEP` - steps through the backlight levels + +Enable the backlight from the Makefile. + +## MIDI functionalty + +This is still a WIP, but check out `quantum/keymap_midi.c` to see what's happening. Enable from the Makefile. + +## Bluetooth functionality + +This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboards/comments/3psx0q/the_planck_keyboard_with_bluetooth_guide_and/?ref=search_posts), but can be enabled via the Makefile. The firmware will still output characters via USB, so be aware of this when charging via a computer. It would make sense to have a switch on the Bluefruit to turn it off at will. + +## Building + +Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|<name>] +``` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. |