diff options
Diffstat (limited to 'keyboards/dztech')
39 files changed, 842 insertions, 4407 deletions
diff --git a/keyboards/dztech/boards/GENERIC_STM32_F303XC/board.c b/keyboards/dztech/boards/GENERIC_STM32_F303XC/board.c deleted file mode 100644 index 4331155df..000000000 --- a/keyboards/dztech/boards/GENERIC_STM32_F303XC/board.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} -#endif -}; -#endif - -void enter_bootloader_mode_if_requested(void); - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - enter_bootloader_mode_if_requested(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/keyboards/dztech/boards/GENERIC_STM32_F303XC/board.h b/keyboards/dztech/boards/GENERIC_STM32_F303XC/board.h deleted file mode 100644 index 988e6af34..000000000 --- a/keyboards/dztech/boards/GENERIC_STM32_F303XC/board.h +++ /dev/null @@ -1,1187 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for Clueboard 60% Keyboard - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC_STM32_F303XC -#define BOARD_NAME "DZ60RGB PCB" - -/* - * Board oscillators-related settings. - * NOTE: LSE not fitted. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK 0U -#endif - -#define STM32_LSEDRV (3U << 3U) - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK 8000000U -#endif - -// #define STM32_HSE_BYPASS - -/* - * MCU type as defined in the ST header. - */ -#define STM32F303xC - -/* - * IO pins assignments. - */ -#define GPIOA_PIN0 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_PIN4 4U -#define GPIOA_PIN5 5U -#define GPIOA_PIN6 6U -#define GPIOA_PIN7 7U -#define GPIOA_PIN8 8U -#define GPIOA_PIN9 9U -#define GPIOA_PIN10 10U -#define GPIOA_USB_DM 11U -#define GPIOA_USB_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_PIN3 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_PIN6 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_PIN9 9U -#define GPIOB_PIN10 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_PIN13 13U -#define GPIOB_PIN14 14U -#define GPIOB_PIN15 15U - -#define GPIOC_PIN0 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_PIN6 6U -#define GPIOC_PIN7 7U -#define GPIOC_PIN8 8U -#define GPIOC_PIN9 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_PIN13 13U -#define GPIOC_PIN14 14U -#define GPIOC_PIN15 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_I2C2_SDA 0U -#define GPIOF_I2C2_SCL 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -#define GPIOG_PIN0 0U -#define GPIOG_PIN1 1U -#define GPIOG_PIN2 2U -#define GPIOG_PIN3 3U -#define GPIOG_PIN4 4U -#define GPIOG_PIN5 5U -#define GPIOG_PIN6 6U -#define GPIOG_PIN7 7U -#define GPIOG_PIN8 8U -#define GPIOG_PIN9 9U -#define GPIOG_PIN10 10U -#define GPIOG_PIN11 11U -#define GPIOG_PIN12 12U -#define GPIOG_PIN13 13U -#define GPIOG_PIN14 14U -#define GPIOG_PIN15 15U - -#define GPIOH_PIN0 0U -#define GPIOH_PIN1 1U -#define GPIOH_PIN2 2U -#define GPIOH_PIN3 3U -#define GPIOH_PIN4 4U -#define GPIOH_PIN5 5U -#define GPIOH_PIN6 6U -#define GPIOH_PIN7 7U -#define GPIOH_PIN8 8U -#define GPIOH_PIN9 9U -#define GPIOH_PIN10 10U -#define GPIOH_PIN11 11U -#define GPIOH_PIN12 12U -#define GPIOH_PIN13 13U -#define GPIOH_PIN14 14U -#define GPIOH_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U) -#define LINE_USB_DM PAL_LINE(GPIOA, 11U) -#define LINE_USB_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) - -#define LINE_PIN6 PAL_LINE(GPIOF, 0U) -#define LINE_PIN7 PAL_LINE(GPIOF, 1U) - -#define LINE_CAPS_LOCK PAL_LINE(GPIOB, 7U) - - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - NC - * PA1 - NC - * PA2 - COL1 - * PA3 - COL2 - * PA4 - SPEAKER1 - * PA5 - SPEAKER2 - * PA6 - COL3 - * PA7 - COL8 - * PA8 - COL6 - * PA9 - COL7 - * PA10 - ROW5 - * PA11 - USB_DM (alternate 14). - * PA12 - USB_DP (alternate 14). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - ROW4 - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \ - PIN_MODE_ALTERNATE(GPIOA_PIN1) | \ - PIN_MODE_INPUT(GPIOA_PIN2) | \ - PIN_MODE_INPUT(GPIOA_PIN3) | \ - PIN_MODE_INPUT(GPIOA_PIN4) | \ - PIN_MODE_INPUT(GPIOA_PIN5) | \ - PIN_MODE_INPUT(GPIOA_PIN6) | \ - PIN_MODE_INPUT(GPIOA_PIN7) | \ - PIN_MODE_INPUT(GPIOA_PIN8) | \ - PIN_MODE_INPUT(GPIOA_PIN9) | \ - PIN_MODE_INPUT(GPIOA_PIN10) | \ - PIN_MODE_ALTERNATE(GPIOA_USB_DM) | \ - PIN_MODE_ALTERNATE(GPIOA_USB_DP) | \ - PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ - PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ - PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | \ - PIN_OSPEED_HIGH(GPIOA_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ - PIN_OSPEED_HIGH(GPIOA_USB_DM) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \ - PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ - PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_PIN0) | \ - PIN_PUPDR_FLOATING(GPIOA_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ - PIN_PUPDR_FLOATING(GPIOA_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \ - PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ - PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \ - PIN_ODR_HIGH(GPIOA_PIN1) | \ - PIN_ODR_HIGH(GPIOA_PIN2) | \ - PIN_ODR_HIGH(GPIOA_PIN3) | \ - PIN_ODR_HIGH(GPIOA_PIN4) | \ - PIN_ODR_HIGH(GPIOA_PIN5) | \ - PIN_ODR_HIGH(GPIOA_PIN6) | \ - PIN_ODR_HIGH(GPIOA_PIN7) | \ - PIN_ODR_HIGH(GPIOA_PIN8) | \ - PIN_ODR_HIGH(GPIOA_PIN9) | \ - PIN_ODR_HIGH(GPIOA_PIN10) | \ - PIN_ODR_HIGH(GPIOA_USB_DM) | \ - PIN_ODR_HIGH(GPIOA_USB_DP) | \ - PIN_ODR_HIGH(GPIOA_SWDIO) | \ - PIN_ODR_HIGH(GPIOA_SWCLK) | \ - PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0) | \ - PIN_AFIO_AF(GPIOA_PIN1, 1) | \ - PIN_AFIO_AF(GPIOA_PIN2, 0) | \ - PIN_AFIO_AF(GPIOA_PIN3, 0) | \ - PIN_AFIO_AF(GPIOA_PIN4, 0) | \ - PIN_AFIO_AF(GPIOA_PIN5, 5) | \ - PIN_AFIO_AF(GPIOA_PIN6, 5) | \ - PIN_AFIO_AF(GPIOA_PIN7, 5)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \ - PIN_AFIO_AF(GPIOA_PIN9, 0) | \ - PIN_AFIO_AF(GPIOA_PIN10, 0) | \ - PIN_AFIO_AF(GPIOA_USB_DM, 14) | \ - PIN_AFIO_AF(GPIOA_USB_DP, 14) | \ - PIN_AFIO_AF(GPIOA_SWDIO, 0) | \ - PIN_AFIO_AF(GPIOA_SWCLK, 0) | \ - PIN_AFIO_AF(GPIOA_PIN15, 0)) - -/* - * GPIOB setup: - * - * PB0 - PIN0 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - PIN3 (alternate 0). - * PB4 - PIN4 (input pullup). - * PB5 - PIN5 (input pullup). - * PB6 - PIN6 LSM303DLHC_SCL (alternate 4). - * PB7 - PIN7 LSM303DLHC_SDA (alternate 4). - * PB8 - PIN8 (input pullup). - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - PIN13 (input pullup). - * PB14 - PIN14 (input pullup). - * PB15 - PIN15 (input pullup). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ - PIN_MODE_INPUT(GPIOB_PIN1) | \ - PIN_MODE_INPUT(GPIOB_PIN2) | \ - PIN_MODE_ALTERNATE(GPIOB_PIN3) | \ - PIN_MODE_INPUT(GPIOB_PIN4) | \ - PIN_MODE_INPUT(GPIOB_PIN5) | \ - PIN_MODE_ALTERNATE(GPIOB_PIN6) | \ - PIN_MODE_OUTPUT(GPIOB_PIN7) | \ - PIN_MODE_INPUT(GPIOB_PIN8) | \ - PIN_MODE_INPUT(GPIOB_PIN9) | \ - PIN_MODE_INPUT(GPIOB_PIN10) | \ - PIN_MODE_INPUT(GPIOB_PIN11) | \ - PIN_MODE_INPUT(GPIOB_PIN12) | \ - PIN_MODE_INPUT(GPIOB_PIN13) | \ - PIN_MODE_INPUT(GPIOB_PIN14) | \ - PIN_MODE_INPUT(GPIOB_PIN15)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ - PIN_OTYPE_OPENDRAIN(GPIOB_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN2) | \ - PIN_OSPEED_HIGH(GPIOB_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ - PIN_OSPEED_HIGH(GPIOB_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN6) | \ - PIN_PUPDR_PULLDOWN(GPIOB_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN15)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ - PIN_ODR_HIGH(GPIOB_PIN1) | \ - PIN_ODR_HIGH(GPIOB_PIN2) | \ - PIN_ODR_HIGH(GPIOB_PIN3) | \ - PIN_ODR_HIGH(GPIOB_PIN4) | \ - PIN_ODR_HIGH(GPIOB_PIN5) | \ - PIN_ODR_HIGH(GPIOB_PIN6) | \ - PIN_ODR_LOW(GPIOB_PIN7) | \ - PIN_ODR_HIGH(GPIOB_PIN8) | \ - PIN_ODR_HIGH(GPIOB_PIN9) | \ - PIN_ODR_HIGH(GPIOB_PIN10) | \ - PIN_ODR_HIGH(GPIOB_PIN11) | \ - PIN_ODR_HIGH(GPIOB_PIN12) | \ - PIN_ODR_HIGH(GPIOB_PIN13) | \ - PIN_ODR_HIGH(GPIOB_PIN14) | \ - PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \ - PIN_AFIO_AF(GPIOB_PIN1, 0) | \ - PIN_AFIO_AF(GPIOB_PIN2, 0) | \ - PIN_AFIO_AF(GPIOB_PIN3, 0) | \ - PIN_AFIO_AF(GPIOB_PIN4, 0) | \ - PIN_AFIO_AF(GPIOB_PIN5, 0) | \ - PIN_AFIO_AF(GPIOB_PIN6, 4) | \ - PIN_AFIO_AF(GPIOB_PIN7, 0)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \ - PIN_AFIO_AF(GPIOB_PIN9, 0) | \ - PIN_AFIO_AF(GPIOB_PIN10, 0) | \ - PIN_AFIO_AF(GPIOB_PIN11, 0) | \ - PIN_AFIO_AF(GPIOB_PIN12, 0) | \ - PIN_AFIO_AF(GPIOB_PIN13, 0) | \ - PIN_AFIO_AF(GPIOB_PIN14, 0) | \ - PIN_AFIO_AF(GPIOB_PIN15, 0)) - -/* - * GPIOC setup: - * - * PC0 - PIN0 (input pullup). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - PIN6 (input pullup). - * PC7 - PIN7 (input pullup). - * PC8 - PIN8 (input pullup). - * PC9 - PIN9 (input pullup). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - PIN14 (input floating). - * PC15 - PIN15 (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \ - PIN_MODE_INPUT(GPIOC_PIN1) | \ - PIN_MODE_INPUT(GPIOC_PIN2) | \ - PIN_MODE_INPUT(GPIOC_PIN3) | \ - PIN_MODE_INPUT(GPIOC_PIN4) | \ - PIN_MODE_INPUT(GPIOC_PIN5) | \ - PIN_MODE_INPUT(GPIOC_PIN6) | \ - PIN_MODE_INPUT(GPIOC_PIN7) | \ - PIN_MODE_INPUT(GPIOC_PIN8) | \ - PIN_MODE_INPUT(GPIOC_PIN9) | \ - PIN_MODE_INPUT(GPIOC_PIN10) | \ - PIN_MODE_INPUT(GPIOC_PIN11) | \ - PIN_MODE_INPUT(GPIOC_PIN12) | \ - PIN_MODE_INPUT(GPIOC_PIN13) | \ - PIN_MODE_INPUT(GPIOC_PIN14) | \ - PIN_MODE_INPUT(GPIOC_PIN15)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN15)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ - PIN_OSPEED_HIGH(GPIOC_PIN14) | \ - PIN_OSPEED_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN14) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN15)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \ - PIN_ODR_HIGH(GPIOC_PIN1) | \ - PIN_ODR_HIGH(GPIOC_PIN2) | \ - PIN_ODR_HIGH(GPIOC_PIN3) | \ - PIN_ODR_HIGH(GPIOC_PIN4) | \ - PIN_ODR_HIGH(GPIOC_PIN5) | \ - PIN_ODR_HIGH(GPIOC_PIN6) | \ - PIN_ODR_HIGH(GPIOC_PIN7) | \ - PIN_ODR_HIGH(GPIOC_PIN8) | \ - PIN_ODR_HIGH(GPIOC_PIN9) | \ - PIN_ODR_HIGH(GPIOC_PIN10) | \ - PIN_ODR_HIGH(GPIOC_PIN11) | \ - PIN_ODR_HIGH(GPIOC_PIN12) | \ - PIN_ODR_HIGH(GPIOC_PIN13) | \ - PIN_ODR_HIGH(GPIOC_PIN14) | \ - PIN_ODR_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \ - PIN_AFIO_AF(GPIOC_PIN1, 0) | \ - PIN_AFIO_AF(GPIOC_PIN2, 0) | \ - PIN_AFIO_AF(GPIOC_PIN3, 0) | \ - PIN_AFIO_AF(GPIOC_PIN4, 0) | \ - PIN_AFIO_AF(GPIOC_PIN5, 0) | \ - PIN_AFIO_AF(GPIOC_PIN6, 0) | \ - PIN_AFIO_AF(GPIOC_PIN7, 0)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \ - PIN_AFIO_AF(GPIOC_PIN9, 0) | \ - PIN_AFIO_AF(GPIOC_PIN10, 0) | \ - PIN_AFIO_AF(GPIOC_PIN11, 0) | \ - PIN_AFIO_AF(GPIOC_PIN12, 0) | \ - PIN_AFIO_AF(GPIOC_PIN13, 0) | \ - PIN_AFIO_AF(GPIOC_PIN14, 0) | \ - PIN_AFIO_AF(GPIOC_PIN15, 0)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD11 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ - PIN_MODE_INPUT(GPIOD_PIN1) | \ - PIN_MODE_INPUT(GPIOD_PIN2) | \ - PIN_MODE_INPUT(GPIOD_PIN3) | \ - PIN_MODE_INPUT(GPIOD_PIN4) | \ - PIN_MODE_INPUT(GPIOD_PIN5) | \ - PIN_MODE_INPUT(GPIOD_PIN6) | \ - PIN_MODE_INPUT(GPIOD_PIN7) | \ - PIN_MODE_INPUT(GPIOD_PIN8) | \ - PIN_MODE_INPUT(GPIOD_PIN9) | \ - PIN_MODE_INPUT(GPIOD_PIN10) | \ - PIN_MODE_INPUT(GPIOD_PIN11) | \ - PIN_MODE_INPUT(GPIOD_PIN12) | \ - PIN_MODE_INPUT(GPIOD_PIN13) | \ - PIN_MODE_INPUT(GPIOD_PIN14) | \ - PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ - PIN_ODR_HIGH(GPIOD_PIN1) | \ - PIN_ODR_HIGH(GPIOD_PIN2) | \ - PIN_ODR_HIGH(GPIOD_PIN3) | \ - PIN_ODR_HIGH(GPIOD_PIN4) | \ - PIN_ODR_HIGH(GPIOD_PIN5) | \ - PIN_ODR_HIGH(GPIOD_PIN6) | \ - PIN_ODR_HIGH(GPIOD_PIN7) | \ - PIN_ODR_HIGH(GPIOD_PIN8) | \ - PIN_ODR_HIGH(GPIOD_PIN9) | \ - PIN_ODR_HIGH(GPIOD_PIN10) | \ - PIN_ODR_HIGH(GPIOD_PIN11) | \ - PIN_ODR_HIGH(GPIOD_PIN12) | \ - PIN_ODR_HIGH(GPIOD_PIN13) | \ - PIN_ODR_HIGH(GPIOD_PIN14) | \ - PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \ - PIN_AFIO_AF(GPIOD_PIN1, 0) | \ - PIN_AFIO_AF(GPIOD_PIN2, 0) | \ - PIN_AFIO_AF(GPIOD_PIN3, 0) | \ - PIN_AFIO_AF(GPIOD_PIN4, 0) | \ - PIN_AFIO_AF(GPIOD_PIN5, 0) | \ - PIN_AFIO_AF(GPIOD_PIN6, 0) | \ - PIN_AFIO_AF(GPIOD_PIN7, 0)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \ - PIN_AFIO_AF(GPIOD_PIN9, 0) | \ - PIN_AFIO_AF(GPIOD_PIN10, 0) | \ - PIN_AFIO_AF(GPIOD_PIN11, 0) | \ - PIN_AFIO_AF(GPIOD_PIN12, 0) | \ - PIN_AFIO_AF(GPIOD_PIN13, 0) | \ - PIN_AFIO_AF(GPIOD_PIN14, 0) | \ - PIN_AFIO_AF(GPIOD_PIN15, 0)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 L3GD20_CS (output pushpull maximum). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (output pushpull maximum). - * PE9 - PIN9 (output pushpull maximum). - * PE10 - PIN10 (output pushpull maximum). - * PE11 - PIN11 (output pushpull maximum). - * PE12 - PIN12 (output pushpull maximum). - * PE13 - PIN13 (output pushpull maximum). - * PE14 - PIN14 (output pushpull maximum). - * PE15 - PIN15 (output pushpull maximum). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ - PIN_MODE_INPUT(GPIOE_PIN1) | \ - PIN_MODE_INPUT(GPIOE_PIN2) |\ - PIN_MODE_OUTPUT(GPIOE_PIN3) | \ - PIN_MODE_INPUT(GPIOE_PIN4) |\ - PIN_MODE_INPUT(GPIOE_PIN5) |\ - PIN_MODE_INPUT(GPIOE_PIN6) | \ - PIN_MODE_INPUT(GPIOE_PIN7) | \ - PIN_MODE_OUTPUT(GPIOE_PIN8) | \ - PIN_MODE_OUTPUT(GPIOE_PIN9) | \ - PIN_MODE_OUTPUT(GPIOE_PIN10) | \ - PIN_MODE_OUTPUT(GPIOE_PIN11) | \ - PIN_MODE_OUTPUT(GPIOE_PIN12) | \ - PIN_MODE_OUTPUT(GPIOE_PIN13) | \ - PIN_MODE_OUTPUT(GPIOE_PIN14) | \ - PIN_MODE_OUTPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |\ - PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |\ - PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |\ - PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |\ - PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |\ - PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |\ - PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |\ - PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |\ - PIN_OSPEED_VERYLOW(GPIOE_PIN1) |\ - PIN_OSPEED_VERYLOW(GPIOE_PIN2) |\ - PIN_OSPEED_HIGH(GPIOE_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN4) |\ - PIN_OSPEED_VERYLOW(GPIOE_PIN5) |\ - PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \ - PIN_OSPEED_HIGH(GPIOE_PIN8) | \ - PIN_OSPEED_HIGH(GPIOE_PIN9) | \ - PIN_OSPEED_HIGH(GPIOE_PIN10) | \ - PIN_OSPEED_HIGH(GPIOE_PIN11) | \ - PIN_OSPEED_HIGH(GPIOE_PIN12) | \ - PIN_OSPEED_HIGH(GPIOE_PIN13) | \ - PIN_OSPEED_HIGH(GPIOE_PIN14) | \ - PIN_OSPEED_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN2) |\ - PIN_PUPDR_FLOATING(GPIOE_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN4) |\ - PIN_PUPDR_PULLUP(GPIOE_PIN5) |\ - PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOE_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ - PIN_PUPDR_FLOATING(GPIOE_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOE_PIN14) |\ - PIN_PUPDR_FLOATING(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ - PIN_ODR_HIGH(GPIOE_PIN1) | \ - PIN_ODR_HIGH(GPIOE_PIN2) | \ - PIN_ODR_HIGH(GPIOE_PIN3) | \ - PIN_ODR_HIGH(GPIOE_PIN4) | \ - PIN_ODR_HIGH(GPIOE_PIN5) | \ - PIN_ODR_HIGH(GPIOE_PIN6) | \ - PIN_ODR_HIGH(GPIOE_PIN7) | \ - PIN_ODR_LOW(GPIOE_PIN8) | \ - PIN_ODR_LOW(GPIOE_PIN9) | \ - PIN_ODR_LOW(GPIOE_PIN10) | \ - PIN_ODR_LOW(GPIOE_PIN11) | \ - PIN_ODR_LOW(GPIOE_PIN12) | \ - PIN_ODR_LOW(GPIOE_PIN13) | \ - PIN_ODR_LOW(GPIOE_PIN14) | \ - PIN_ODR_LOW(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | \ - PIN_AFIO_AF(GPIOE_PIN1, 0) | \ - PIN_AFIO_AF(GPIOE_PIN2, 0) |\ - PIN_AFIO_AF(GPIOE_PIN3, 0) | \ - PIN_AFIO_AF(GPIOE_PIN4, 0) |\ - PIN_AFIO_AF(GPIOE_PIN5, 0) |\ - PIN_AFIO_AF(GPIOE_PIN6, 0) | \ - PIN_AFIO_AF(GPIOE_PIN7, 0)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | \ - PIN_AFIO_AF(GPIOE_PIN9, 0) | \ - PIN_AFIO_AF(GPIOE_PIN10, 0) | \ - PIN_AFIO_AF(GPIOE_PIN11, 0) | \ - PIN_AFIO_AF(GPIOE_PIN12, 0) | \ - PIN_AFIO_AF(GPIOE_PIN13, 0) | \ - PIN_AFIO_AF(GPIOE_PIN14, 0) | \ - PIN_AFIO_AF(GPIOE_PIN15, 0)) - -/* - * GPIOF setup: - * - * PF0 - I2C2_SDA (input floating). - * PF1 - I2C2_SCL (input floating). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_I2C2_SDA) | \ - PIN_MODE_INPUT(GPIOF_I2C2_SCL) | \ - PIN_MODE_INPUT(GPIOF_PIN2) | \ - PIN_MODE_INPUT(GPIOF_PIN3) | \ - PIN_MODE_INPUT(GPIOF_PIN4) | \ - PIN_MODE_INPUT(GPIOF_PIN5) | \ - PIN_MODE_INPUT(GPIOF_PIN6) | \ - PIN_MODE_INPUT(GPIOF_PIN7) | \ - PIN_MODE_INPUT(GPIOF_PIN8) | \ - PIN_MODE_INPUT(GPIOF_PIN9) | \ - PIN_MODE_INPUT(GPIOF_PIN10) | \ - PIN_MODE_INPUT(GPIOF_PIN11) | \ - PIN_MODE_INPUT(GPIOF_PIN12) | \ - PIN_MODE_INPUT(GPIOF_PIN13) | \ - PIN_MODE_INPUT(GPIOF_PIN14) | \ - PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SDA) | \ - PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SCL) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_I2C2_SDA) | \ - PIN_OSPEED_HIGH(GPIOF_I2C2_SCL) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_I2C2_SDA) | \ - PIN_PUPDR_FLOATING(GPIOF_I2C2_SCL) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_I2C2_SDA) | \ - PIN_ODR_HIGH(GPIOF_I2C2_SCL) | \ - PIN_ODR_HIGH(GPIOF_PIN2) | \ - PIN_ODR_HIGH(GPIOF_PIN3) | \ - PIN_ODR_HIGH(GPIOF_PIN4) | \ - PIN_ODR_HIGH(GPIOF_PIN5) | \ - PIN_ODR_HIGH(GPIOF_PIN6) | \ - PIN_ODR_HIGH(GPIOF_PIN7) | \ - PIN_ODR_HIGH(GPIOF_PIN8) | \ - PIN_ODR_HIGH(GPIOF_PIN9) | \ - PIN_ODR_HIGH(GPIOF_PIN10) | \ - PIN_ODR_HIGH(GPIOF_PIN11) | \ - PIN_ODR_HIGH(GPIOF_PIN12) | \ - PIN_ODR_HIGH(GPIOF_PIN13) | \ - PIN_ODR_HIGH(GPIOF_PIN14) | \ - PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_I2C2_SDA, 0) | \ - PIN_AFIO_AF(GPIOF_I2C2_SCL, 0) | \ - PIN_AFIO_AF(GPIOF_PIN2, 0) | \ - PIN_AFIO_AF(GPIOF_PIN3, 0) | \ - PIN_AFIO_AF(GPIOF_PIN4, 0) | \ - PIN_AFIO_AF(GPIOF_PIN5, 0) | \ - PIN_AFIO_AF(GPIOF_PIN6, 0) | \ - PIN_AFIO_AF(GPIOF_PIN7, 0)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \ - PIN_AFIO_AF(GPIOF_PIN9, 0) | \ - PIN_AFIO_AF(GPIOF_PIN10, 0) | \ - PIN_AFIO_AF(GPIOF_PIN11, 0) | \ - PIN_AFIO_AF(GPIOF_PIN12, 0) | \ - PIN_AFIO_AF(GPIOF_PIN13, 0) | \ - PIN_AFIO_AF(GPIOF_PIN14, 0) | \ - PIN_AFIO_AF(GPIOF_PIN15, 0)) - -/* - * GPIOG setup: - * - * PG0 - PIN0 (input pullup). - * PG1 - PIN1 (input pullup). - * PG2 - PIN2 (input pullup). - * PG3 - PIN3 (input pullup). - * PG4 - PIN4 (input pullup). - * PG5 - PIN5 (input pullup). - * PG6 - PIN6 (input pullup). - * PG7 - PIN7 (input pullup). - * PG8 - PIN8 (input pullup). - * PG9 - PIN9 (input pullup). - * PG10 - PIN10 (input pullup). - * PG11 - PIN11 (input pullup). - * PG12 - PIN12 (input pullup). - * PG13 - PIN13 (input pullup). - * PG14 - PIN14 (input pullup). - * PG15 - PIN15 (input pullup). - */ -#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \ - PIN_MODE_INPUT(GPIOG_PIN1) | \ - PIN_MODE_INPUT(GPIOG_PIN2) | \ - PIN_MODE_INPUT(GPIOG_PIN3) | \ - PIN_MODE_INPUT(GPIOG_PIN4) | \ - PIN_MODE_INPUT(GPIOG_PIN5) | \ - PIN_MODE_INPUT(GPIOG_PIN6) | \ - PIN_MODE_INPUT(GPIOG_PIN7) | \ - PIN_MODE_INPUT(GPIOG_PIN8) | \ - PIN_MODE_INPUT(GPIOG_PIN9) | \ - PIN_MODE_INPUT(GPIOG_PIN10) | \ - PIN_MODE_INPUT(GPIOG_PIN11) | \ - PIN_MODE_INPUT(GPIOG_PIN12) | \ - PIN_MODE_INPUT(GPIOG_PIN13) | \ - PIN_MODE_INPUT(GPIOG_PIN14) | \ - PIN_MODE_INPUT(GPIOG_PIN15)) -#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) -#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOG_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOG_PIN15)) -#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOG_PIN15)) -#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \ - PIN_ODR_HIGH(GPIOG_PIN1) | \ - PIN_ODR_HIGH(GPIOG_PIN2) | \ - PIN_ODR_HIGH(GPIOG_PIN3) | \ - PIN_ODR_HIGH(GPIOG_PIN4) | \ - PIN_ODR_HIGH(GPIOG_PIN5) | \ - PIN_ODR_HIGH(GPIOG_PIN6) | \ - PIN_ODR_HIGH(GPIOG_PIN7) | \ - PIN_ODR_HIGH(GPIOG_PIN8) | \ - PIN_ODR_HIGH(GPIOG_PIN9) | \ - PIN_ODR_HIGH(GPIOG_PIN10) | \ - PIN_ODR_HIGH(GPIOG_PIN11) | \ - PIN_ODR_HIGH(GPIOG_PIN12) | \ - PIN_ODR_HIGH(GPIOG_PIN13) | \ - PIN_ODR_HIGH(GPIOG_PIN14) | \ - PIN_ODR_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | \ - PIN_AFIO_AF(GPIOG_PIN1, 0) | \ - PIN_AFIO_AF(GPIOG_PIN2, 0) | \ - PIN_AFIO_AF(GPIOG_PIN3, 0) | \ - PIN_AFIO_AF(GPIOG_PIN4, 0) | \ - PIN_AFIO_AF(GPIOG_PIN5, 0) | \ - PIN_AFIO_AF(GPIOG_PIN6, 0) | \ - PIN_AFIO_AF(GPIOG_PIN7, 0)) -#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | \ - PIN_AFIO_AF(GPIOG_PIN9, 0) | \ - PIN_AFIO_AF(GPIOG_PIN10, 0) | \ - PIN_AFIO_AF(GPIOG_PIN11, 0) | \ - PIN_AFIO_AF(GPIOG_PIN12, 0) | \ - PIN_AFIO_AF(GPIOG_PIN13, 0) | \ - PIN_AFIO_AF(GPIOG_PIN14, 0) | \ - PIN_AFIO_AF(GPIOG_PIN15, 0)) - -/* - * GPIOH setup: - * - * PH0 - PIN0 (input pullup). - * PH1 - PIN1 (input pullup). - * PH2 - PIN2 (input pullup). - * PH3 - PIN3 (input pullup). - * PH4 - PIN4 (input pullup). - * PH5 - PIN5 (input pullup). - * PH6 - PIN6 (input pullup). - * PH7 - PIN7 (input pullup). - * PH8 - PIN8 (input pullup). - * PH9 - PIN9 (input pullup). - * PH10 - PIN10 (input pullup). - * PH11 - PIN11 (input pullup). - * PH12 - PIN12 (input pullup). - * PH13 - PIN13 (input pullup). - * PH14 - PIN14 (input pullup). - * PH15 - PIN15 (input pullup). - */ -#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_PIN0) | \ - PIN_MODE_INPUT(GPIOH_PIN1) | \ - PIN_MODE_INPUT(GPIOH_PIN2) | \ - PIN_MODE_INPUT(GPIOH_PIN3) | \ - PIN_MODE_INPUT(GPIOH_PIN4) | \ - PIN_MODE_INPUT(GPIOH_PIN5) | \ - PIN_MODE_INPUT(GPIOH_PIN6) | \ - PIN_MODE_INPUT(GPIOH_PIN7) | \ - PIN_MODE_INPUT(GPIOH_PIN8) | \ - PIN_MODE_INPUT(GPIOH_PIN9) | \ - PIN_MODE_INPUT(GPIOH_PIN10) | \ - PIN_MODE_INPUT(GPIOH_PIN11) | \ - PIN_MODE_INPUT(GPIOH_PIN12) | \ - PIN_MODE_INPUT(GPIOH_PIN13) | \ - PIN_MODE_INPUT(GPIOH_PIN14) | \ - PIN_MODE_INPUT(GPIOH_PIN15)) -#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) -#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOH_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOH_PIN15)) -#define VAL_GPIOH_PUPDR (PIN_PUPDR_PULLUP(GPIOH_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOH_PIN15)) -#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_PIN0) | \ - PIN_ODR_HIGH(GPIOH_PIN1) | \ - PIN_ODR_HIGH(GPIOH_PIN2) | \ - PIN_ODR_HIGH(GPIOH_PIN3) | \ - PIN_ODR_HIGH(GPIOH_PIN4) | \ - PIN_ODR_HIGH(GPIOH_PIN5) | \ - PIN_ODR_HIGH(GPIOH_PIN6) | \ - PIN_ODR_HIGH(GPIOH_PIN7) | \ - PIN_ODR_HIGH(GPIOH_PIN8) | \ - PIN_ODR_HIGH(GPIOH_PIN9) | \ - PIN_ODR_HIGH(GPIOH_PIN10) | \ - PIN_ODR_HIGH(GPIOH_PIN11) | \ - PIN_ODR_HIGH(GPIOH_PIN12) | \ - PIN_ODR_HIGH(GPIOH_PIN13) | \ - PIN_ODR_HIGH(GPIOH_PIN14) | \ - PIN_ODR_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_PIN0, 0) | \ - PIN_AFIO_AF(GPIOH_PIN1, 0) | \ - PIN_AFIO_AF(GPIOH_PIN2, 0) | \ - PIN_AFIO_AF(GPIOH_PIN3, 0) | \ - PIN_AFIO_AF(GPIOH_PIN4, 0) | \ - PIN_AFIO_AF(GPIOH_PIN5, 0) | \ - PIN_AFIO_AF(GPIOH_PIN6, 0) | \ - PIN_AFIO_AF(GPIOH_PIN7, 0)) -#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | \ - PIN_AFIO_AF(GPIOH_PIN9, 0) | \ - PIN_AFIO_AF(GPIOH_PIN10, 0) | \ - PIN_AFIO_AF(GPIOH_PIN11, 0) | \ - PIN_AFIO_AF(GPIOH_PIN12, 0) | \ - PIN_AFIO_AF(GPIOH_PIN13, 0) | \ - PIN_AFIO_AF(GPIOH_PIN14, 0) | \ - PIN_AFIO_AF(GPIOH_PIN15, 0)) - - -/* - * USB bus activation macro, required by the USB driver. - */ -// #define usb_lld_connect_bus(usbp) -#define usb_lld_connect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14))) -// #define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT) -/* - * USB bus de-activation macro, required by the USB driver. - */ -// #define usb_lld_disconnect_bus(usbp) -#define usb_lld_disconnect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL)); palClearPad(GPIOA, GPIOA_USB_DP) -// #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12) - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/dztech/boards/GENERIC_STM32_F303XC/board.mk b/keyboards/dztech/boards/GENERIC_STM32_F303XC/board.mk deleted file mode 100644 index 43377629a..000000000 --- a/keyboards/dztech/boards/GENERIC_STM32_F303XC/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC diff --git a/keyboards/dztech/dz40rgb/bootloader_defs.h b/keyboards/dztech/dz40rgb/bootloader_defs.h deleted file mode 100644 index 3b0e9d20a..000000000 --- a/keyboards/dztech/dz40rgb/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 diff --git a/keyboards/dztech/dz40rgb/chconf.h b/keyboards/dztech/dz40rgb/chconf.h deleted file mode 100644 index 1d9f12ff1..000000000 --- a/keyboards/dztech/dz40rgb/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 100000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/dztech/dz40rgb/config.h b/keyboards/dztech/dz40rgb/config.h index 0d6c4ae39..5f1502f4a 100644 --- a/keyboards/dztech/dz40rgb/config.h +++ b/keyboards/dztech/dz40rgb/config.h @@ -21,7 +21,7 @@ #define DEBOUNCE 3 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended #define RGB_MATRIX_KEYPRESSES #define DISABLE_RGB_MATRIX_SPLASH #define DISABLE_RGB_MATRIX_MULTISPLASH diff --git a/keyboards/dztech/dz40rgb/dz40rgb.c b/keyboards/dztech/dz40rgb/dz40rgb.c index b1a03760f..92e4a7cad 100644 --- a/keyboards/dztech/dz40rgb/dz40rgb.c +++ b/keyboards/dztech/dz40rgb/dz40rgb.c @@ -52,7 +52,7 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, E_3, D_3, F_3}, {0, E_2, D_2, F_2}, {0, E_1, D_1, F_1}, - + {0, E_13, D_13, F_13}, {0, E_14, D_14, F_14}, @@ -71,70 +71,25 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { }; -const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { - - {{0|(11<<4)}, {20.36*11, 0}, 1}, - {{0|(10<<4)}, {20.36*10, 0}, 1}, - {{0|(9<<4)}, {20.36*9, 0}, 1}, - {{0|(8<<4)}, {20.36*8, 0}, 1}, - {{0|(7<<4)}, {20.36*7, 0}, 1}, - {{0|(6<<4)}, { 20.36*6, 0}, 1}, - {{0|(5<<4)}, { 20.36*5, 0}, 1}, - {{0|(4<<4)}, { 20.36*4, 0}, 1}, - {{0|(3<<4)}, { 20.36*3, 0}, 1}, - {{0|(2<<4)}, { 20.36*2, 0}, 1}, - {{0|(1<<4)}, { 20.36*1, 0}, 1}, - {{0|(0<<4)}, { 20.36*0, 0}, 1}, - - {{0|(12<<4)}, {20.36*11, 21.33*0.5}, 1}, - {{0|(13<<4)}, {20.36*0,21.33*0.5}, 1}, - - {{1|(11<<4)}, {20.36*11, 21.33}, 1}, - {{1|(10<<4)}, {20.36*10, 21.33}, 0}, - {{1|(9<<4)}, {20.36*9, 21.33}, 0}, - {{1|(8<<4)}, {20.36*8, 21.33}, 0}, - {{1|(7<<4)}, {20.36*7, 21.33}, 0}, - {{1|(6<<4)}, { 20.36*6, 21.33}, 0}, - {{1|(5<<4)}, { 20.36*5, 21.33}, 0}, - {{1|(4<<4)}, { 20.36*4, 21.33}, 0}, - {{1|(3<<4)}, { 20.36*3, 21.33}, 0}, - {{1|(2<<4)}, { 20.36*2, 21.33}, 0}, - {{1|(1<<4)}, { 20.36*1, 21.33}, 0}, - {{1|(0<<4)}, { 20.36*0, 21.33}, 1}, - - {{1|(12<<4)}, {20.36*11, 21.33*1.5}, 1}, - {{1|(13<<4)}, {20.36*0,21.33*1.5}, 1}, - - {{2|(11<<4)}, {20.36*11, 21.33*2}, 1}, - {{2|(10<<4)}, {20.36*10, 21.33*2}, 0}, - {{2|(9<<4)}, {20.36*9, 21.33*2}, 0}, - {{2|(8<<4)}, {20.36*8, 21.33*2}, 0}, - {{2|(7<<4)}, {20.36*7, 21.33*2}, 0}, - {{2|(6<<4)}, { 20.36*6, 21.33*2}, 0}, - {{2|(5<<4)}, { 20.36*5, 21.33*2}, 0}, - {{2|(4<<4)}, { 20.36*4, 21.33*2}, 0}, - {{2|(3<<4)}, { 20.36*3, 21.33*2}, 0}, - {{2|(2<<4)}, { 20.36*2, 21.33*2}, 0}, - {{2|(1<<4)}, { 20.36*1, 21.33*2}, 0}, - {{2|(0<<4)}, { 20.36*0, 21.33*2}, 1}, +led_config_t g_led_config = { { + { 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 }, + { 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 }, + { 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, 28 }, + { 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42 } +}, { + { 223, 0 }, { 203, 0 }, { 183, 0 }, { 162, 0 }, { 142, 0 }, { 122, 0 }, { 101, 0 }, { 81, 0 }, { 61, 0 }, { 40, 0 }, { 20, 0 }, { 0, 0 }, + { 223, 10 }, { 0, 10 }, { 223, 21 }, { 203, 21 }, { 183, 21 }, { 162, 21 }, { 142, 21 }, { 122, 21 }, { 101, 21 }, { 81, 21 }, { 61, 21 }, { 40, 21 }, + { 20, 21 }, { 0, 21 }, { 223, 31 }, { 0, 31 }, { 223, 42 }, { 203, 42 }, { 183, 42 }, { 162, 42 }, { 142, 42 }, { 122, 42 }, { 101, 42 }, { 81, 42 }, + { 61, 42 }, { 40, 42 }, { 20, 42 }, { 0, 42 }, { 223, 53 }, { 0, 53 }, { 223, 63 }, { 203, 63 }, { 183, 63 }, { 162, 63 }, { 142, 63 }, { 122, 63 }, + { 101, 63 }, { 81, 63 }, { 61, 63 }, { 40, 63 }, { 20, 63 }, { 0, 63 } +}, { + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 1, 1, 1, 1, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1 +} }; - {{2|(12<<4)}, {20.36*11, 21.33*2.5}, 1}, - {{2|(13<<4)}, {20.36*0,21.33*2.5}, 1}, - - {{3|(11<<4)}, {20.36*11, 21.33*3}, 1}, - {{3|(10<<4)}, {20.36*10, 21.33*3}, 1}, - {{3|(9<<4)}, {20.36*9, 21.33*3}, 1}, - {{3|(8<<4)}, {20.36*8, 21.33*3}, 1}, - {{3|(7<<4)}, {20.36*7, 21.33*3}, 1}, - {{3|(6<<4)}, { 20.36*6, 21.33*3}, 1}, - {{3|(5<<4)}, { 20.36*5, 21.33*3}, 1}, - {{3|(4<<4)}, { 20.36*4, 21.33*3}, 1}, - {{3|(3<<4)}, { 20.36*3, 21.33*3}, 1}, - {{3|(2<<4)}, { 20.36*2, 21.33*3}, 1}, - {{3|(1<<4)}, { 20.36*1, 21.33*3}, 1}, - {{3|(0<<4)}, { 20.36*0, 21.33*3}, 1} - -}; #else const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations @@ -205,93 +160,44 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { }; -const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { - - {{0|(11<<4)}, {20.36*11, 0}, 1}, - {{0|(10<<4)}, {20.36*10, 0}, 1}, - {{0|(9<<4)}, {20.36*9, 0}, 1}, - {{0|(8<<4)}, {20.36*8, 0}, 1}, - {{0|(7<<4)}, {20.36*7, 0}, 1}, - {{0|(6<<4)}, { 20.36*6, 0}, 1}, - {{0|(5<<4)}, { 20.36*5, 0}, 1}, - {{0|(4<<4)}, { 20.36*4, 0}, 1}, - {{0|(3<<4)}, { 20.36*3, 0}, 1}, - {{0|(2<<4)}, { 20.36*2, 0}, 1}, - {{0|(1<<4)}, { 20.36*1, 0}, 1}, - {{0|(0<<4)}, { 20.36*0, 0}, 1}, - - {{0|(12<<4)}, {20.36*11, 21.33*0.5}, 1}, - {{0|(13<<4)}, {20.36*0,21.33*0.5}, 1}, - - {{1|(11<<4)}, {20.36*11, 21.33}, 1}, - {{1|(10<<4)}, {20.36*10, 21.33}, 0}, - {{1|(9<<4)}, {20.36*9, 21.33}, 0}, - {{1|(8<<4)}, {20.36*8, 21.33}, 0}, - {{1|(7<<4)}, {20.36*7, 21.33}, 0}, - {{1|(6<<4)}, { 20.36*6, 21.33}, 0}, - {{1|(5<<4)}, { 20.36*5, 21.33}, 0}, - {{1|(4<<4)}, { 20.36*4, 21.33}, 0}, - {{1|(3<<4)}, { 20.36*3, 21.33}, 0}, - {{1|(2<<4)}, { 20.36*2, 21.33}, 0}, - {{1|(1<<4)}, { 20.36*1, 21.33}, 0}, - {{1|(0<<4)}, { 20.36*0, 21.33}, 1}, +led_config_t g_led_config = { { + { 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 }, + { 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 }, + { 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, 28 }, + { 52, 51, 50, 49, 48, NO_LED, 47, 46, 45, 44, 43, 42 } +}, { + { 223, 0 }, { 203, 0 }, { 183, 0 }, { 162, 0 }, { 142, 0 }, { 122, 0 }, { 101, 0 }, { 81, 0 }, { 61, 0 }, { 40, 0 }, { 20, 0 }, { 0, 0 }, + { 223, 10 }, { 0, 10 }, { 223, 21 }, { 203, 21 }, { 183, 21 }, { 162, 21 }, { 142, 21 }, { 122, 21 }, { 101, 21 }, { 81, 21 }, { 61, 21 }, { 40, 21 }, + { 20, 21 }, { 0, 21 }, { 223, 31 }, { 0, 31 }, { 223, 42 }, { 203, 42 }, { 183, 42 }, { 162, 42 }, { 142, 42 }, { 122, 42 }, { 101, 42 }, { 81, 42 }, + { 61, 42 }, { 40, 42 }, { 20, 42 }, { 0, 42 }, { 223, 53 }, { 0, 53 }, { 223, 63 }, { 203, 63 }, { 183, 63 }, { 162, 63 }, { 142, 63 }, { 111, 63 }, + { 81, 63 }, { 61, 63 }, { 40, 63 }, { 20, 63 }, { 0, 63 } +}, { + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 1, 1, 1, 1, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1 +} }; - {{1|(12<<4)}, {20.36*11, 21.33*1.5}, 1}, - {{1|(13<<4)}, {20.36*0,21.33*1.5}, 1}, - - {{2|(11<<4)}, {20.36*11, 21.33*2}, 1}, - {{2|(10<<4)}, {20.36*10, 21.33*2}, 0}, - {{2|(9<<4)}, {20.36*9, 21.33*2}, 0}, - {{2|(8<<4)}, {20.36*8, 21.33*2}, 0}, - {{2|(7<<4)}, {20.36*7, 21.33*2}, 0}, - {{2|(6<<4)}, { 20.36*6, 21.33*2}, 0}, - {{2|(5<<4)}, { 20.36*5, 21.33*2}, 0}, - {{2|(4<<4)}, { 20.36*4, 21.33*2}, 0}, - {{2|(3<<4)}, { 20.36*3, 21.33*2}, 0}, - {{2|(2<<4)}, { 20.36*2, 21.33*2}, 0}, - {{2|(1<<4)}, { 20.36*1, 21.33*2}, 0}, - {{2|(0<<4)}, { 20.36*0, 21.33*2}, 1}, - - {{2|(12<<4)}, {20.36*11, 21.33*2.5}, 1}, - {{2|(13<<4)}, {20.36*0,21.33*2.5}, 1}, - - {{3|(11<<4)}, {20.36*11, 21.33*3}, 1}, - {{3|(10<<4)}, {20.36*10, 21.33*3}, 1}, - {{3|(9<<4)}, {20.36*9, 21.33*3}, 1}, - {{3|(8<<4)}, {20.36*8, 21.33*3}, 1}, - {{3|(7<<4)}, {20.36*7, 21.33*3}, 1}, - {{3|(6<<4)}, { 20.36*5.5, 21.33*3}, 1}, - {{3|(4<<4)}, { 20.36*4, 21.33*3}, 1}, - {{3|(3<<4)}, { 20.36*3, 21.33*3}, 1}, - {{3|(2<<4)}, { 20.36*2, 21.33*3}, 1}, - {{3|(1<<4)}, { 20.36*1, 21.33*3}, 1}, - {{3|(0<<4)}, { 20.36*0, 21.33*3}, 1} - -}; #endif - void matrix_init_kb(void) { matrix_init_user(); } - - void matrix_scan_kb(void) { matrix_scan_user(); } - - bool process_record_kb(uint16_t keycode, keyrecord_t *record) { return process_record_user(keycode, record); } - - void suspend_power_down_kb(void) { rgb_matrix_set_suspend_state(true); + suspend_power_down_user(); } void suspend_wakeup_init_kb(void) { rgb_matrix_set_suspend_state(false); + suspend_wakeup_init_user(); } diff --git a/keyboards/dztech/dz40rgb/halconf.h b/keyboards/dztech/dz40rgb/halconf.h deleted file mode 100644 index eda293c49..000000000 --- a/keyboards/dztech/dz40rgb/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/dztech/dz40rgb/keymaps/default/keymap.c b/keyboards/dztech/dz40rgb/keymaps/default/keymap.c index 6ea7421c9..650c178a7 100644 --- a/keyboards/dztech/dz40rgb/keymaps/default/keymap.c +++ b/keyboards/dztech/dz40rgb/keymaps/default/keymap.c @@ -31,14 +31,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; + +extern led_config_t g_led_config; void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { - rgb_led led; for (int i = 0; i < DRIVER_LED_TOTAL; i++) { - led = g_rgb_leds[i]; - if (led.matrix_co.raw < 0xFF) { - if (led.modifier) { - rgb_matrix_set_color( i, red, green, blue ); - } + if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) { + rgb_matrix_set_color( i, red, green, blue ); } } } diff --git a/keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c b/keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c index bbbe5a8f0..80741b19c 100644 --- a/keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c +++ b/keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c @@ -53,15 +53,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - +extern led_config_t g_led_config; void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { - rgb_led led; for (int i = 0; i < DRIVER_LED_TOTAL; i++) { - led = g_rgb_leds[i]; - if (led.matrix_co.raw < 0xFF) { - if (led.modifier) { - rgb_matrix_set_color( i, red, green, blue ); - } + if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) { + rgb_matrix_set_color( i, red, green, blue ); } } } diff --git a/keyboards/dztech/dz40rgb/mcuconf.h b/keyboards/dztech/dz40rgb/mcuconf.h deleted file mode 100644 index 226da48d5..000000000 --- a/keyboards/dztech/dz40rgb/mcuconf.h +++ /dev/null @@ -1,257 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F3xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -#undef STM32_HSE_BYPASS -// #error "oh no" -// #endif - -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/dztech/dz40rgb/rules.mk b/keyboards/dztech/dz40rgb/rules.mk index 99cbafb8c..fc4b028d5 100644 --- a/keyboards/dztech/dz40rgb/rules.mk +++ b/keyboards/dztech/dz40rgb/rules.mk @@ -1,49 +1,6 @@ -# project specific files - -## chip/board settings -# the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F3xx - -# Linker script to use -# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F303xC - -# Startup code to use -# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f3xx - -# Board: it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -BOARD = GENERIC_STM32_F303XC - -# Cortex version -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 - -USE_FPU = yes - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 -OPT_DEFS = - -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DNO_SUSPEND_POWER_DOWN - -# Options to pass to dfu-util when flashing +MCU = STM32F303 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave - -# Build Options -# comment out to disable the options. -# +DFU_SUFFIX_ARGS = -p DF11 -v 0483 BACKLIGHT_ENABLE = no BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/dztech/dz60rgb/bootloader_defs.h b/keyboards/dztech/dz60rgb/bootloader_defs.h deleted file mode 100644 index 3b0e9d20a..000000000 --- a/keyboards/dztech/dz60rgb/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 diff --git a/keyboards/dztech/dz60rgb/chconf.h b/keyboards/dztech/dz60rgb/chconf.h deleted file mode 100644 index 1d9f12ff1..000000000 --- a/keyboards/dztech/dz60rgb/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 100000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/dztech/dz60rgb/config.h b/keyboards/dztech/dz60rgb/config.h index f43b39810..edf0982ab 100644 --- a/keyboards/dztech/dz60rgb/config.h +++ b/keyboards/dztech/dz60rgb/config.h @@ -22,7 +22,7 @@ #define DEBOUNCE 3 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 @@ -32,5 +32,11 @@ #define DRIVER_ADDR_1 0b1010000 #define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. #define DRIVER_COUNT 2 +#if defined (dzrgb60_ansi) || defined (dzrgb60_iso) +#define DRIVER_1_LED_TOTAL 61 +#elif defined (dzrgb60_hhkb) || defined (dzrgb60_hhkb_iso) +#define DRIVER_1_LED_TOTAL 62 +#else #define DRIVER_1_LED_TOTAL 63 +#endif #define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL diff --git a/keyboards/dztech/dz60rgb/dz60rgb.c b/keyboards/dztech/dz60rgb/dz60rgb.c index 99e3b5646..28ac7ce9e 100644 --- a/keyboards/dztech/dz60rgb/dz60rgb.c +++ b/keyboards/dztech/dz60rgb/dz60rgb.c @@ -1,14 +1,7 @@ #include "dz60rgb.h" #include "config.h" #if defined (dzrgb60_iso) - const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ {0, K_14, J_14, L_14}, {0, K_13, J_13, L_13}, {0, K_12, J_12, L_12}, @@ -23,7 +16,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, K_3, J_3, L_3}, {0, K_2, J_2, L_2}, {0, K_1, J_1, L_1}, - {0, H_15, G_15, I_15}, {0, H_13, G_13, I_13}, {0, H_12, G_12, I_12}, @@ -38,7 +30,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, H_3, G_3, I_3}, {0, H_2, G_2, I_2}, {0, H_1, G_1, I_1}, - {0, B_14, A_14, C_14}, {0, E_12, D_12, F_12}, {0, E_11, D_11, F_11}, @@ -52,7 +43,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, E_3, D_3, F_3}, {0, E_2, D_2, F_2}, {0, E_1, D_1, F_1}, - {0, B_13, A_13, C_13}, {0, B_11, A_11, C_11}, {0, B_10, A_10, C_10}, @@ -65,7 +55,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_3, A_3, C_3}, {0, B_2, A_2, C_2}, {0, B_1, A_1, C_1}, - {0, B_15, A_15, C_15}, {0, E_13, D_13, F_13}, {0, B_12, A_12, C_12}, @@ -73,89 +62,31 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_16, A_16, C_16}, {0, E_16, D_16, F_16}, {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16} -}; - -const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { - {{0|(13<<4)}, {16*13.5, 0}, 1}, - {{0|(12<<4)}, {16*12, 0}, 1}, - {{0|(11<<4)}, {16*11, 0}, 1}, - {{0|(10<<4)}, {16*10, 0}, 1}, - {{0|(9<<4)}, {16*9, 0}, 1}, - {{0|(8<<4)}, {16*8, 0}, 1}, - {{0|(7<<4)}, {16*7, 0}, 1}, - {{0|(6<<4)}, {16*6, 0}, 1}, - {{0|(5<<4)}, {16*5, 0}, 1}, - {{0|(4<<4)}, {16*4, 0}, 1}, - {{0|(3<<4)}, {16*3, 0}, 1}, - {{0|(2<<4)}, {16*2, 0}, 1}, - {{0|(1<<4)}, {16*1, 0}, 1}, - {{0|(0<<4)}, {16*0, 0}, 1}, - - {{2|(13<<4)}, {16*13.75, 24}, 1}, - {{1|(12<<4)}, {16*12.5, 16}, 0}, - {{1|(11<<4)}, {16*11.5, 16}, 0}, - {{1|(10<<4)}, {16*10.5, 16}, 0}, - {{1|(9<<4)}, { 16*9.5, 16}, 0}, - {{1|(8<<4)}, { 16*8.5, 16}, 0}, - {{1|(7<<4)}, { 16*7.5, 16}, 0}, - {{1|(6<<4)}, { 16*6.5, 16}, 0}, - {{1|(5<<4)}, { 16*5.5, 16}, 0}, - {{1|(4<<4)}, { 16*4.5, 16}, 0}, - {{1|(3<<4)}, { 16*3.5, 16}, 0}, - {{1|(2<<4)}, { 16*2.5, 16}, 0}, - {{1|(1<<4)}, { 16*1.5, 16}, 0}, - {{1|(0<<4)}, { 16*0.25, 16}, 1}, - - {{1|(13<<4)}, {16*12.75, 32}, 1}, - {{2|(11<<4)}, {16*11.75, 32}, 0}, - {{2|(10<<4)}, {16*10.75, 32}, 0}, - {{2|(9<<4)}, {16*9.75, 32}, 0}, - {{2|(8<<4)}, {16*8.75, 32}, 0}, - {{2|(7<<4)}, {16*7.75, 32}, 0}, - {{2|(6<<4)}, { 16*6.75, 32}, 0}, - {{2|(5<<4)}, { 16*5.75, 32}, 0}, - {{2|(4<<4)}, { 16*4.75, 32}, 0}, - {{2|(3<<4)}, { 16*3.75, 32}, 0}, - {{2|(2<<4)}, { 16*2.75, 32}, 0}, - {{2|(1<<4)}, { 16*1.75, 32}, 0}, - {{2|(0<<4)}, { 16*0.375, 32}, 1}, - - {{3|(11<<4)}, {16*13.125, 48}, 1}, - {{3|(10<<4)}, {16*11.25, 48}, 0}, - {{3|(9<<4)}, {16*10.25, 48}, 0}, - {{3|(8<<4)}, {16*9.25, 48}, 0}, - {{3|(7<<4)}, {16*8.25, 48}, 0}, - {{3|(6<<4)}, {16*7.25, 48}, 0}, - {{3|(5<<4)}, {16*6.25, 48}, 0}, - {{3|(4<<4)}, {16*5.25, 48}, 0}, - {{3|(3<<4)}, {16*4.25, 48}, 0}, - {{3|(2<<4)}, {16*3.25, 48}, 0}, - {{3|(1<<4)}, {16*1.25, 48}, 0}, - {{3|(0<<4)}, {16*0.625, 48}, 1}, - - {{4|(13<<4)}, {16*13.875, 64}, 1}, - {{4|(11<<4)}, {16*12.625, 64}, 1}, - {{4|(10<<4)}, {16*11.375, 64}, 1}, - {{4|(9<<4)}, {16*10.125, 64}, 1}, - {{4|(5<<4)}, { 16*6.375, 64}, 0}, - {{4|(2<<4)}, { 16*2.625, 64}, 1}, - {{4|(1<<4)}, { 16*1.375, 64}, 1}, - {{4|(0<<4)}, { 16*0.125, 64}, 1} - + {0, K_16, J_16, L_16}, }; - +led_config_t g_led_config = { { + { 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 }, + { 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 28 }, + { 40, 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, NO_LED, 14 }, + { 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, NO_LED, NO_LED }, + { 60, 59, 58, NO_LED, NO_LED, 57, NO_LED, NO_LED, NO_LED, 56, 55, 54, NO_LED, 53 } +}, { + { 216, 0 }, { 192, 0 }, { 176, 0 }, { 160, 0 }, { 144, 0 }, { 128, 0 }, { 112, 0 }, { 96, 0 }, { 80, 0 }, { 64, 0 }, { 48, 0 }, { 32, 0 }, { 16, 0 }, { 0, 0 }, + { 220, 24 }, { 200, 16 }, { 184, 16 }, { 168, 16 }, { 152, 16 }, { 136, 16 }, { 120, 16 }, { 104, 16 }, { 88, 16 }, { 72, 16 }, { 56, 16 }, { 40, 16 }, { 24, 16 }, { 4, 16 }, + { 204, 32 }, { 188, 32 }, { 172, 32 }, { 156, 32 }, { 140, 32 }, { 124, 32 }, { 108, 32 }, { 92, 32 }, { 76, 32 }, { 60, 32 }, { 44, 32 }, { 28, 32 }, { 6, 32 }, { 210, 48 }, + { 180, 48 }, { 164, 48 }, { 148, 48 }, { 132, 48 }, { 116, 48 }, { 100, 48 }, { 84, 48 }, { 68, 48 }, { 52, 48 }, { 20, 48 }, { 10, 48 }, { 222, 64 }, { 202, 64 }, { 182, 64 }, + { 162, 64 }, { 102, 64 }, { 42, 64 }, { 22, 64 }, { 2, 64 } +}, { + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, + 1, 4, 1, 1, 1 +} }; #elif defined (dzrgb60_hhkb) - const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ {0, H_15, G_15, I_15}, {0, K_14, J_14, L_14}, {0, K_13, J_13, L_13}, @@ -171,7 +102,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, K_3, J_3, L_3}, {0, K_2, J_2, L_2}, {0, K_1, J_1, L_1}, - {0, H_14, G_14, I_14}, {0, H_13, G_13, I_13}, {0, H_12, G_12, I_12}, @@ -186,7 +116,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, H_3, G_3, I_3}, {0, H_2, G_2, I_2}, {0, H_1, G_1, I_1}, - {0, E_14, D_14, F_14}, {0, E_12, D_12, F_12}, {0, E_11, D_11, F_11}, @@ -200,7 +129,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, E_3, D_3, F_3}, {0, E_2, D_2, F_2}, {0, E_1, D_1, F_1}, - {0, B_14, A_14, C_14}, {0, B_13, A_13, C_13}, {0, B_11, A_11, C_11}, @@ -214,93 +142,37 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_3, A_3, C_3}, {0, B_2, A_2, C_2}, {0, B_1, A_1, C_1}, - {0, B_15, A_15, C_15}, {0, E_13, D_13, F_13}, {0, B_12, A_12, C_12}, {0, B_16, A_16, C_16}, {0, E_16, D_16, F_16}, {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16} + {0, K_16, J_16, L_16}, }; -const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { - {{2|(12<<4)}, {16*14, 0}, 1}, - {{0|(13<<4)}, {16*13, 0}, 1}, - {{0|(12<<4)}, {16*12, 0}, 1}, - {{0|(11<<4)}, {16*11, 0}, 1}, - {{0|(10<<4)}, {16*10, 0}, 1}, - {{0|(9<<4)}, {16*9, 0}, 1}, - {{0|(8<<4)}, {16*8, 0}, 1}, - {{0|(7<<4)}, {16*7, 0}, 1}, - {{0|(6<<4)}, {16*6, 0}, 1}, - {{0|(5<<4)}, {16*5, 0}, 1}, - {{0|(4<<4)}, {16*4, 0}, 1}, - {{0|(3<<4)}, {16*3, 0}, 1}, - {{0|(2<<4)}, {16*2, 0}, 1}, - {{0|(1<<4)}, {16*1, 0}, 1}, - {{0|(0<<4)}, {16*0, 0}, 1}, - - {{1|(13<<4)}, {16*13.75, 16}, 1}, - {{1|(12<<4)}, {16*12.5, 16}, 0}, - {{1|(11<<4)}, {16*11.5, 16}, 0}, - {{1|(10<<4)}, {16*10.5, 16}, 0}, - {{1|(9<<4)}, { 16*9.5, 16}, 0}, - {{1|(8<<4)}, { 16*8.5, 16}, 0}, - {{1|(7<<4)}, { 16*7.5, 16}, 0}, - {{1|(6<<4)}, { 16*6.5, 16}, 0}, - {{1|(5<<4)}, { 16*5.5, 16}, 0}, - {{1|(4<<4)}, { 16*4.5, 16}, 0}, - {{1|(3<<4)}, { 16*3.5, 16}, 0}, - {{1|(2<<4)}, { 16*2.5, 16}, 0}, - {{1|(1<<4)}, { 16*1.5, 16}, 0}, - {{1|(0<<4)}, { 16*0.25, 16}, 1}, - - {{2|(13<<4)}, {16*12.75, 32}, 1}, - {{2|(11<<4)}, {16*11.75, 32}, 0}, - {{2|(10<<4)}, {16*10.75, 32}, 0}, - {{2|(9<<4)}, {16*9.75, 32}, 0}, - {{2|(8<<4)}, {16*8.75, 32}, 0}, - {{2|(7<<4)}, {16*7.75, 32}, 0}, - {{2|(6<<4)}, { 16*6.75, 32}, 0}, - {{2|(5<<4)}, { 16*5.75, 32}, 0}, - {{2|(4<<4)}, { 16*4.75, 32}, 0}, - {{2|(3<<4)}, { 16*3.75, 32}, 0}, - {{2|(2<<4)}, { 16*2.75, 32}, 0}, - {{2|(1<<4)}, { 16*1.75, 32}, 0}, - {{2|(0<<4)}, { 16*0.375, 32}, 1}, - - {{3|(13<<4)}, {16*14, 48}, 1}, - {{3|(11<<4)}, {16*12.625, 48}, 0}, - {{3|(10<<4)}, {16*11.25, 48}, 0}, - {{3|(9<<4)}, {16*10.25, 48}, 0}, - {{3|(8<<4)}, {16*9.25, 48}, 0}, - {{3|(7<<4)}, {16*8.25, 48}, 0}, - {{3|(6<<4)}, {16*7.25, 48}, 0}, - {{3|(5<<4)}, {16*6.25, 48}, 0}, - {{3|(4<<4)}, {16*5.25, 48}, 0}, - {{3|(3<<4)}, {16*4.25, 48}, 0}, - {{3|(2<<4)}, {16*3.25, 48}, 0}, - {{3|(1<<4)}, {16*1.25, 48}, 0}, - {{3|(0<<4)}, {16*0.625, 48}, 1}, +led_config_t g_led_config = { { + { 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1 }, + { 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15 }, + { 41, 40, 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 0, 29 }, + { 54, 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, NO_LED, 42 }, + { 61, 60, 59, NO_LED, NO_LED, 58, NO_LED, NO_LED, NO_LED, NO_LED, 57, 56, NO_LED, 55 } +}, { + { 224, 0 }, { 208, 0 }, { 192, 0 }, { 176, 0 }, { 160, 0 }, { 144, 0 }, { 128, 0 }, { 112, 0 }, { 96, 0 }, { 80, 0 }, { 64, 0 }, { 48, 0 }, { 32, 0 }, { 16, 0 }, + { 0, 0 }, { 220, 16 }, { 200, 16 }, { 184, 16 }, { 168, 16 }, { 152, 16 }, { 136, 16 }, { 120, 16 }, { 104, 16 }, { 88, 16 }, { 72, 16 }, { 56, 16 }, { 40, 16 }, { 24, 16 }, + { 4, 16 }, { 204, 32 }, { 188, 32 }, { 172, 32 }, { 156, 32 }, { 140, 32 }, { 124, 32 }, { 108, 32 }, { 92, 32 }, { 76, 32 }, { 60, 32 }, { 44, 32 }, { 28, 32 }, { 6, 32 }, + { 224, 48 }, { 202, 48 }, { 180, 48 }, { 164, 48 }, { 148, 48 }, { 132, 48 }, { 116, 48 }, { 100, 48 }, { 84, 48 }, { 68, 48 }, { 52, 48 }, { 20, 48 }, { 10, 48 }, { 218, 64 }, + { 198, 64 }, { 178, 64 }, { 112, 64 }, { 46, 64 }, { 26, 64 }, { 6, 64 } +}, { + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, + 1, 1, 4, 1, 1, 1 +} }; - {{4|(13<<4)}, {16*13.625, 64}, 1}, - {{4|(11<<4)}, {16*12.375, 64}, 1}, - {{4|(10<<4)}, {16*11.125, 64}, 1}, - {{4|(5<<4)}, { 16*7, 64}, 0}, - {{4|(2<<4)}, { 16*2.875, 64}, 1}, - {{4|(1<<4)}, { 16*1.625, 64}, 1}, - {{4|(0<<4)}, { 16*0.375, 64}, 1} - -}; #elif defined (dzrgb60_hhkb_iso) const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ {0, H_15, G_15, I_15}, {0, K_14, J_14, L_14}, {0, K_13, J_13, L_13}, @@ -316,7 +188,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, K_3, J_3, L_3}, {0, K_2, J_2, L_2}, {0, K_1, J_1, L_1}, - {0, K_15, J_15, L_15}, {0, H_13, G_13, I_13}, {0, H_12, G_12, I_12}, @@ -331,7 +202,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, H_3, G_3, I_3}, {0, H_2, G_2, I_2}, {0, H_1, G_1, I_1}, - {0, E_15, D_15, F_15}, {0, E_12, D_12, F_12}, {0, E_11, D_11, F_11}, @@ -345,7 +215,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, E_3, D_3, F_3}, {0, E_2, D_2, F_2}, {0, E_1, D_1, F_1}, - {0, B_14, A_14, C_14}, {0, B_13, A_13, C_13}, {0, B_11, A_11, C_11}, @@ -359,93 +228,37 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_3, A_3, C_3}, {0, B_2, A_2, C_2}, {0, B_1, A_1, C_1}, - {0, B_15, A_15, C_15}, {0, E_13, D_13, F_13}, {0, B_12, A_12, C_12}, {0, B_16, A_16, C_16}, {0, E_16, D_16, F_16}, {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16} + {0, K_16, J_16, L_16}, }; -const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { - {{2|(12<<4)}, {16*14, 0}, 1}, - {{0|(13<<4)}, {16*13, 0}, 1}, - {{0|(12<<4)}, {16*12, 0}, 1}, - {{0|(11<<4)}, {16*11, 0}, 1}, - {{0|(10<<4)}, {16*10, 0}, 1}, - {{0|(9<<4)}, {16*9, 0}, 1}, - {{0|(8<<4)}, {16*8, 0}, 1}, - {{0|(7<<4)}, {16*7, 0}, 1}, - {{0|(6<<4)}, {16*6, 0}, 1}, - {{0|(5<<4)}, {16*5, 0}, 1}, - {{0|(4<<4)}, {16*4, 0}, 1}, - {{0|(3<<4)}, {16*3, 0}, 1}, - {{0|(2<<4)}, {16*2, 0}, 1}, - {{0|(1<<4)}, {16*1, 0}, 1}, - {{0|(0<<4)}, {16*0, 0}, 1}, - - {{2|(13<<4)}, {16*13.75, 24}, 1}, - {{1|(12<<4)}, {16*12.5, 16}, 0}, - {{1|(11<<4)}, {16*11.5, 16}, 0}, - {{1|(10<<4)}, {16*10.5, 16}, 0}, - {{1|(9<<4)}, { 16*9.5, 16}, 0}, - {{1|(8<<4)}, { 16*8.5, 16}, 0}, - {{1|(7<<4)}, { 16*7.5, 16}, 0}, - {{1|(6<<4)}, { 16*6.5, 16}, 0}, - {{1|(5<<4)}, { 16*5.5, 16}, 0}, - {{1|(4<<4)}, { 16*4.5, 16}, 0}, - {{1|(3<<4)}, { 16*3.5, 16}, 0}, - {{1|(2<<4)}, { 16*2.5, 16}, 0}, - {{1|(1<<4)}, { 16*1.5, 16}, 0}, - {{1|(0<<4)}, { 16*0.25, 16}, 1}, +led_config_t g_led_config = { { + { 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1 }, + { 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 29 }, + { 41, 40, 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 0, 15 }, + { 54, 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, NO_LED, 42 }, + { 61, 60, 59, NO_LED, NO_LED, 58, NO_LED, NO_LED, NO_LED, NO_LED, 57, 56, NO_LED, 55 } +}, { + { 224, 0 }, { 208, 0 }, { 192, 0 }, { 176, 0 }, { 160, 0 }, { 144, 0 }, { 128, 0 }, { 112, 0 }, { 96, 0 }, { 80, 0 }, { 64, 0 }, { 48, 0 }, { 32, 0 }, { 16, 0 }, + { 0, 0 }, { 220, 24 }, { 200, 16 }, { 184, 16 }, { 168, 16 }, { 152, 16 }, { 136, 16 }, { 120, 16 }, { 104, 16 }, { 88, 16 }, { 72, 16 }, { 56, 16 }, { 40, 16 }, { 24, 16 }, + { 4, 16 }, { 204, 32 }, { 188, 32 }, { 172, 32 }, { 156, 32 }, { 140, 32 }, { 124, 32 }, { 108, 32 }, { 92, 32 }, { 76, 32 }, { 60, 32 }, { 44, 32 }, { 28, 32 }, { 6, 32 }, + { 224, 48 }, { 202, 48 }, { 180, 48 }, { 164, 48 }, { 148, 48 }, { 132, 48 }, { 116, 48 }, { 100, 48 }, { 84, 48 }, { 68, 48 }, { 52, 48 }, { 20, 48 }, { 10, 48 }, { 218, 64 }, + { 198, 64 }, { 178, 64 }, { 112, 64 }, { 46, 64 }, { 26, 64 }, { 6, 64 } +}, { + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, + 1, 1, 4, 1, 1, 1 +} }; - {{1|(13<<4)}, {16*12.75, 32}, 1}, - {{2|(11<<4)}, {16*11.75, 32}, 0}, - {{2|(10<<4)}, {16*10.75, 32}, 0}, - {{2|(9<<4)}, {16*9.75, 32}, 0}, - {{2|(8<<4)}, {16*8.75, 32}, 0}, - {{2|(7<<4)}, {16*7.75, 32}, 0}, - {{2|(6<<4)}, { 16*6.75, 32}, 0}, - {{2|(5<<4)}, { 16*5.75, 32}, 0}, - {{2|(4<<4)}, { 16*4.75, 32}, 0}, - {{2|(3<<4)}, { 16*3.75, 32}, 0}, - {{2|(2<<4)}, { 16*2.75, 32}, 0}, - {{2|(1<<4)}, { 16*1.75, 32}, 0}, - {{2|(0<<4)}, { 16*0.375, 32}, 1}, - - {{3|(13<<4)}, {16*14, 48}, 1}, - {{3|(11<<4)}, {16*12.625, 48}, 0}, - {{3|(10<<4)}, {16*11.25, 48}, 0}, - {{3|(9<<4)}, {16*10.25, 48}, 0}, - {{3|(8<<4)}, {16*9.25, 48}, 0}, - {{3|(7<<4)}, {16*8.25, 48}, 0}, - {{3|(6<<4)}, {16*7.25, 48}, 0}, - {{3|(5<<4)}, {16*6.25, 48}, 0}, - {{3|(4<<4)}, {16*5.25, 48}, 0}, - {{3|(3<<4)}, {16*4.25, 48}, 0}, - {{3|(2<<4)}, {16*3.25, 48}, 0}, - {{3|(1<<4)}, {16*1.25, 48}, 0}, - {{3|(0<<4)}, {16*0.625, 48}, 1}, - - {{4|(13<<4)}, {16*13.625, 64}, 1}, - {{4|(11<<4)}, {16*12.375, 64}, 1}, - {{4|(10<<4)}, {16*11.125, 64}, 1}, - {{4|(5<<4)}, { 16*7, 64}, 0}, - {{4|(2<<4)}, { 16*2.875, 64}, 1}, - {{4|(1<<4)}, { 16*1.625, 64}, 1}, - {{4|(0<<4)}, { 16*0.375, 64}, 1} - -}; #elif defined (dzrgb60_ansi) const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ {0, K_14, J_14, L_14}, {0, K_13, J_13, L_13}, {0, K_12, J_12, L_12}, @@ -460,7 +273,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, K_3, J_3, L_3}, {0, K_2, J_2, L_2}, {0, K_1, J_1, L_1}, - {0, H_14, G_14, I_14}, {0, H_13, G_13, I_13}, {0, H_12, G_12, I_12}, @@ -475,7 +287,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, H_3, G_3, I_3}, {0, H_2, G_2, I_2}, {0, H_1, G_1, I_1}, - {0, E_14, D_14, F_14}, {0, E_12, D_12, F_12}, {0, E_11, D_11, F_11}, @@ -489,7 +300,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, E_3, D_3, F_3}, {0, E_2, D_2, F_2}, {0, E_1, D_1, F_1}, - {0, B_13, A_13, C_13}, {0, B_11, A_11, C_11}, {0, B_10, A_10, C_10}, @@ -502,7 +312,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_3, A_3, C_3}, {0, B_2, A_2, C_2}, {0, B_1, A_1, C_1}, - {0, B_15, A_15, C_15}, {0, E_13, D_13, F_13}, {0, B_12, A_12, C_12}, @@ -510,85 +319,31 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_16, A_16, C_16}, {0, E_16, D_16, F_16}, {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16} + {0, K_16, J_16, L_16}, }; -const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { - {{0|(13<<4)}, {16*13.5, 0}, 1}, - {{0|(12<<4)}, {16*12, 0}, 1}, - {{0|(11<<4)}, {16*11, 0}, 1}, - {{0|(10<<4)}, {16*10, 0}, 1}, - {{0|(9<<4)}, {16*9, 0}, 1}, - {{0|(8<<4)}, {16*8, 0}, 1}, - {{0|(7<<4)}, {16*7, 0}, 1}, - {{0|(6<<4)}, {16*6, 0}, 1}, - {{0|(5<<4)}, {16*5, 0}, 1}, - {{0|(4<<4)}, {16*4, 0}, 1}, - {{0|(3<<4)}, {16*3, 0}, 1}, - {{0|(2<<4)}, {16*2, 0}, 1}, - {{0|(1<<4)}, {16*1, 0}, 1}, - {{0|(0<<4)}, {16*0, 0}, 1}, - - {{1|(13<<4)}, {16*13.75, 16}, 1}, - {{1|(12<<4)}, {16*12.5, 16}, 0}, - {{1|(11<<4)}, {16*11.5, 16}, 0}, - {{1|(10<<4)}, {16*10.5, 16}, 0}, - {{1|(9<<4)}, { 16*9.5, 16}, 0}, - {{1|(8<<4)}, { 16*8.5, 16}, 0}, - {{1|(7<<4)}, { 16*7.5, 16}, 0}, - {{1|(6<<4)}, { 16*6.5, 16}, 0}, - {{1|(5<<4)}, { 16*5.5, 16}, 0}, - {{1|(4<<4)}, { 16*4.5, 16}, 0}, - {{1|(3<<4)}, { 16*3.5, 16}, 0}, - {{1|(2<<4)}, { 16*2.5, 16}, 0}, - {{1|(1<<4)}, { 16*1.5, 16}, 0}, - {{1|(0<<4)}, { 16*0.25, 16}, 1}, - - {{2|(13<<4)}, {16*13.375, 24}, 1}, - {{2|(11<<4)}, {16*11.75, 32}, 0}, - {{2|(10<<4)}, {16*10.75, 32}, 0}, - {{2|(9<<4)}, {16*9.75, 32}, 0}, - {{2|(8<<4)}, {16*8.75, 32}, 0}, - {{2|(7<<4)}, {16*7.75, 32}, 0}, - {{2|(6<<4)}, { 16*6.75, 32}, 0}, - {{2|(5<<4)}, { 16*5.75, 32}, 0}, - {{2|(4<<4)}, { 16*4.75, 32}, 0}, - {{2|(3<<4)}, { 16*3.75, 32}, 0}, - {{2|(2<<4)}, { 16*2.75, 32}, 0}, - {{2|(1<<4)}, { 16*1.75, 32}, 0}, - {{2|(0<<4)}, { 16*0.375, 32}, 1}, - - {{3|(11<<4)}, {16*13.125, 48}, 1}, - {{3|(10<<4)}, {16*11.25, 48}, 0}, - {{3|(9<<4)}, {16*10.25, 48}, 0}, - {{3|(8<<4)}, {16*9.25, 48}, 0}, - {{3|(7<<4)}, {16*8.25, 48}, 0}, - {{3|(6<<4)}, {16*7.25, 48}, 0}, - {{3|(5<<4)}, {16*6.25, 48}, 0}, - {{3|(4<<4)}, {16*5.25, 48}, 0}, - {{3|(3<<4)}, {16*4.25, 48}, 0}, - {{3|(2<<4)}, {16*3.25, 48}, 0}, - {{3|(1<<4)}, {16*1.25, 48}, 0}, - {{3|(0<<4)}, {16*0.625, 48}, 1}, +led_config_t g_led_config = { { + { 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 }, + { 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 }, + { 40, 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, NO_LED, 28 }, + { 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, NO_LED, NO_LED }, + { 60, 59, 58, NO_LED, NO_LED, 57, NO_LED, NO_LED, NO_LED, 56, 55, 54, NO_LED, 53 } +}, { + { 216, 0 }, { 192, 0 }, { 176, 0 }, { 160, 0 }, { 144, 0 }, { 128, 0 }, { 112, 0 }, { 96, 0 }, { 80, 0 }, { 64, 0 }, { 48, 0 }, { 32, 0 }, { 16, 0 }, { 0, 0 }, + { 220, 16 }, { 200, 16 }, { 184, 16 }, { 168, 16 }, { 152, 16 }, { 136, 16 }, { 120, 16 }, { 104, 16 }, { 88, 16 }, { 72, 16 }, { 56, 16 }, { 40, 16 }, { 24, 16 }, { 4, 16 }, + { 214, 24 }, { 188, 32 }, { 172, 32 }, { 156, 32 }, { 140, 32 }, { 124, 32 }, { 108, 32 }, { 92, 32 }, { 76, 32 }, { 60, 32 }, { 44, 32 }, { 28, 32 }, { 6, 32 }, { 210, 48 }, + { 180, 48 }, { 164, 48 }, { 148, 48 }, { 132, 48 }, { 116, 48 }, { 100, 48 }, { 84, 48 }, { 68, 48 }, { 52, 48 }, { 20, 48 }, { 10, 48 }, { 222, 64 }, { 202, 64 }, { 182, 64 }, + { 162, 64 }, { 102, 64 }, { 42, 64 }, { 22, 64 }, { 2, 64 } +}, { + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, + 1, 4, 1, 1, 1 +} }; - {{4|(13<<4)}, {16*13.875, 64}, 1}, - {{4|(11<<4)}, {16*12.625, 64}, 1}, - {{4|(10<<4)}, {16*11.375, 64}, 1}, - {{4|(9<<4)}, {16*10.125, 64}, 1}, - {{4|(5<<4)}, { 16*6.375, 64}, 0}, - {{4|(2<<4)}, { 16*2.625, 64}, 1}, - {{4|(1<<4)}, { 16*1.375, 64}, 1}, - {{4|(0<<4)}, { 16*0.125, 64}, 1} -}; #else - const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ {0, K_14, J_14, L_14}, {0, K_13, J_13, L_13}, {0, K_12, J_12, L_12}, @@ -603,7 +358,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, K_3, J_3, L_3}, {0, K_2, J_2, L_2}, {0, K_1, J_1, L_1}, - {0, H_14, G_14, I_14}, {0, H_13, G_13, I_13}, {0, H_12, G_12, I_12}, @@ -618,7 +372,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, H_3, G_3, I_3}, {0, H_2, G_2, I_2}, {0, H_1, G_1, I_1}, - {0, E_14, D_14, F_14}, {0, E_12, D_12, F_12}, {0, E_11, D_11, F_11}, @@ -632,7 +385,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, E_3, D_3, F_3}, {0, E_2, D_2, F_2}, {0, E_1, D_1, F_1}, - {0, B_14, A_14, C_14}, {0, B_13, A_13, C_13}, {0, B_11, A_11, C_11}, @@ -646,7 +398,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_3, A_3, C_3}, {0, B_2, A_2, C_2}, {0, B_1, A_1, C_1}, - {0, B_15, A_15, C_15}, {0, E_13, D_13, F_13}, {0, B_12, A_12, C_12}, @@ -655,102 +406,48 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_16, A_16, C_16}, {0, E_16, D_16, F_16}, {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16} + {0, K_16, J_16, L_16}, }; -const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { - {{0|(13<<4)}, {17.23*13, 0}, 1}, - {{0|(12<<4)}, {17.23*12, 0}, 1}, - {{0|(11<<4)}, {17.23*11, 0}, 1}, - {{0|(10<<4)}, {17.23*10, 0}, 1}, - {{0|(9<<4)}, {17.23*9, 0}, 1}, - {{0|(8<<4)}, {17.23*8, 0}, 1}, - {{0|(7<<4)}, {17.23*7, 0}, 1}, - {{0|(6<<4)}, { 17.23*6, 0}, 1}, - {{0|(5<<4)}, { 17.23*5, 0}, 1}, - {{0|(4<<4)}, { 17.23*4, 0}, 1}, - {{0|(3<<4)}, { 17.23*3, 0}, 1}, - {{0|(2<<4)}, { 17.23*2, 0}, 1}, - {{0|(1<<4)}, { 17.23*1, 0}, 1}, - {{0|(0<<4)}, { 17.23*0, 0}, 1}, - - {{1|(13<<4)}, {17.23*13, 16}, 1}, - {{1|(12<<4)}, {17.23*12, 16}, 0}, - {{1|(11<<4)}, {17.23*11, 16}, 0}, - {{1|(10<<4)}, {17.23*10, 16}, 0}, - {{1|(9<<4)}, {17.23*9, 16}, 0}, - {{1|(8<<4)}, {17.23*8, 16}, 0}, - {{1|(7<<4)}, {17.23*7, 16}, 0}, - {{1|(6<<4)}, { 17.23*6, 16}, 0}, - {{1|(5<<4)}, { 17.23*5, 16}, 0}, - {{1|(4<<4)}, { 17.23*4, 16}, 0}, - {{1|(3<<4)}, { 17.23*3, 16}, 0}, - {{1|(2<<4)}, { 17.23*2, 16}, 0}, - {{1|(1<<4)}, { 17.23*1, 16}, 0}, - {{1|(0<<4)}, { 17.23*0, 16}, 1}, - - {{2|(13<<4)}, {17.23*13, 32}, 1}, - {{2|(11<<4)}, {17.23*11, 32}, 0}, - {{2|(10<<4)}, {17.23*10, 32}, 0}, - {{2|(9<<4)}, {17.23*9, 32}, 0}, - {{2|(8<<4)}, {17.23*8, 32}, 0}, - {{2|(7<<4)}, {17.23*7, 32}, 0}, - {{2|(6<<4)}, { 17.23*6, 32}, 0}, - {{2|(5<<4)}, { 17.23*5, 32}, 0}, - {{2|(4<<4)}, { 17.23*4, 32}, 0}, - {{2|(3<<4)}, { 17.23*3, 32}, 0}, - {{2|(2<<4)}, { 17.23*2, 32}, 0}, - {{2|(1<<4)}, { 17.23*1, 32}, 0}, - {{2|(0<<4)}, { 17.23*0, 32}, 1}, - - {{3|(13<<4)}, {17.23*13, 48}, 1}, - {{3|(11<<4)}, {17.23*11, 48}, 0}, - {{3|(10<<4)}, {17.23*10, 48}, 0}, - {{3|(9<<4)}, {17.23*9, 48}, 0}, - {{3|(8<<4)}, {17.23*8, 48}, 0}, - {{3|(7<<4)}, {17.23*7, 48}, 0}, - {{3|(6<<4)}, { 17.23*6, 48}, 0}, - {{3|(5<<4)}, { 17.23*5, 48}, 0}, - {{3|(4<<4)}, { 17.23*4, 48}, 0}, - {{3|(3<<4)}, { 17.23*3, 48}, 0}, - {{3|(2<<4)}, { 17.23*2, 48}, 0}, - {{3|(1<<4)}, { 17.23*1, 48}, 0}, - {{3|(0<<4)}, { 17.23*0, 48}, 1}, - - {{4|(13<<4)}, {17.23*13, 64}, 1}, - {{4|(11<<4)}, {17.23*11, 64}, 1}, - {{4|(10<<4)}, {17.23*10, 64}, 1}, - {{4|(9<<4)}, {17.23*9, 64}, 1}, - {{4|(8<<4)}, {17.23*8, 64}, 1}, - {{4|(5<<4)}, { 17.23*5, 64}, 0}, - {{4|(2<<4)}, { 17.23*2, 64}, 1}, - {{4|(1<<4)}, { 17.23*1, 64}, 1}, - {{4|(0<<4)}, { 17.23*0, 64}, 1} +led_config_t g_led_config = { { + { 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 }, + { 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 }, + { 40, 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, NO_LED, 28 }, + { 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, NO_LED, 41 }, + { 62, 61, 60, NO_LED, NO_LED, 59, NO_LED, NO_LED, 58, 57, 56, 55, NO_LED, 54 } +}, { + { 223, 0 }, { 206, 0 }, { 189, 0 }, { 172, 0 }, { 155, 0 }, { 137, 0 }, { 120, 0 }, { 103, 0 }, { 86, 0 }, { 68, 0 }, { 51, 0 }, { 34, 0 }, { 17, 0 }, { 0, 0 }, + { 223, 16 }, { 206, 16 }, { 189, 16 }, { 172, 16 }, { 155, 16 }, { 137, 16 }, { 120, 16 }, { 103, 16 }, { 86, 16 }, { 68, 16 }, { 51, 16 }, { 34, 16 }, { 17, 16 }, { 0, 16 }, + { 223, 32 }, { 189, 32 }, { 172, 32 }, { 155, 32 }, { 137, 32 }, { 120, 32 }, { 103, 32 }, { 86, 32 }, { 68, 32 }, { 51, 32 }, { 34, 32 }, { 17, 32 }, { 0, 32 }, { 223, 48 }, + { 189, 48 }, { 172, 48 }, { 155, 48 }, { 137, 48 }, { 120, 48 }, { 103, 48 }, { 86, 48 }, { 68, 48 }, { 51, 48 }, { 34, 48 }, { 17, 48 }, { 0, 48 }, { 223, 64 }, { 189, 64 }, + { 172, 64 }, { 155, 64 }, { 137, 64 }, { 86, 64 }, { 34, 64 }, { 17, 64 }, { 0, 64 } +}, { + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, + 1, 1, 1, 4, 1, 1, 1 +} }; -}; #endif void matrix_init_kb(void) { matrix_init_user(); } - - void matrix_scan_kb(void) { matrix_scan_user(); } - - bool process_record_kb(uint16_t keycode, keyrecord_t *record) { return process_record_user(keycode, record); } - - void suspend_power_down_kb(void) { rgb_matrix_set_suspend_state(true); + suspend_power_down_user(); } void suspend_wakeup_init_kb(void) { rgb_matrix_set_suspend_state(false); + suspend_wakeup_init_user(); } diff --git a/keyboards/dztech/dz60rgb/halconf.h b/keyboards/dztech/dz60rgb/halconf.h deleted file mode 100644 index eda293c49..000000000 --- a/keyboards/dztech/dz60rgb/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/dztech/dz60rgb/keymaps/ansi/config.h b/keyboards/dztech/dz60rgb/keymaps/ansi/config.h index 3ca582e84..4bfad0df0 100644 --- a/keyboards/dztech/dz60rgb/keymaps/ansi/config.h +++ b/keyboards/dztech/dz60rgb/keymaps/ansi/config.h @@ -1,6 +1,2 @@ #pragma once #define dzrgb60_ansi -#undef DRIVER_1_LED_TOTAL -#undef DRIVER_LED_TOTAL -#define DRIVER_1_LED_TOTAL 61 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL diff --git a/keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c b/keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c index fcdf29e4e..584f035ef 100644 --- a/keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c +++ b/keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c @@ -38,14 +38,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, TO(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), }; +extern led_config_t g_led_config; void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { - rgb_led led; for (int i = 0; i < DRIVER_LED_TOTAL; i++) { - led = g_rgb_leds[i]; - if (led.matrix_co.raw < 0xFF) { - if (led.modifier) { - rgb_matrix_set_color( i, red, green, blue ); - } + if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) { + rgb_matrix_set_color( i, red, green, blue ); } } } diff --git a/keyboards/dztech/dz60rgb/keymaps/default/keymap.c b/keyboards/dztech/dz60rgb/keymaps/default/keymap.c index 0eff4ca8a..c0bc1b89b 100644 --- a/keyboards/dztech/dz60rgb/keymaps/default/keymap.c +++ b/keyboards/dztech/dz60rgb/keymaps/default/keymap.c @@ -5,26 +5,23 @@ extern bool g_suspend_state; #define _LAYER2 2 #define _LAYER3 3 #define _LAYER4 4 -#define _LAYER5 5 -#define _LAYER6 6 -#define _LAYER7 7 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LAYER0] = LAYOUT( /* Base */ - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ - CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL),\ - KC_LCTL, KC_LGUI, LM(1, MOD_LALT), KC_SPC, KC_RALT, MO(1) , KC_LEFT, KC_DOWN, KC_RIGHT), + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ + CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL),\ + KC_LCTL, KC_LGUI, LM(1, MOD_LALT), KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT), [_LAYER1] = LAYOUT( /* FN */ TO(3), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET ,\ - KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,\ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, EEP_RST,\ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_VOLU, KC_MUTE,\ KC_TRNS, KC_TRNS, KC_TRNS, TO(4), KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT), [_LAYER2] = LAYOUT( /* LIGHT */ KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, RESET ,\ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, EEP_RST,\ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), [_LAYER3] = LAYOUT( /* NUMPAD */ @@ -33,38 +30,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_P4, KC_P5, KC_P6, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_TRNS, KC_PENT,\ KC_TRNS, KC_P1, KC_P2, KC_P3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_TRNS, KC_TRNS,\ KC_TRNS, KC_P0, KC_PDOT, KC_PENT, KC_P0, KC_PDOT, KC_TRNS, KC_TRNS, KC_TRNS), - [_LAYER4] = LAYOUT( /* MAC */ - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ - CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL),\ - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(5) , KC_LEFT, KC_DOWN, KC_RIGHT), + [_LAYER4] = LAYOUT( /* SWITCH LALT AND LGUI */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ + CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL),\ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, TO(0), KC_LEFT, KC_DOWN, KC_RIGHT), }; - - -void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { - rgb_led led; - for (int i = 0; i < DRIVER_LED_TOTAL; i++) { - led = g_rgb_leds[i]; - if (led.matrix_co.raw < 0xFF) { - if (led.modifier) { - rgb_matrix_set_color( i, red, green, blue ); - } - } - } -} - void rgb_matrix_indicators_user(void) { uint8_t this_led = host_keyboard_leds(); if (!g_suspend_state) { switch (biton32(layer_state)) { - case _LAYER1: - rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); - break; - case _LAYER2: - rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); - break; case _LAYER3: if ( this_led & (1<<USB_LED_NUM_LOCK)) { rgb_matrix_set_color(13, 0xFF, 0x00, 0x00); @@ -136,20 +113,15 @@ void rgb_matrix_indicators_user(void) { rgb_matrix_set_color(62, 0x00, 0x00, 0x00); break; case _LAYER4: - rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); + rgb_matrix_set_color_all(0xFF, 0xFF, 0x00); break; } } if ( this_led & (1<<USB_LED_CAPS_LOCK)) { rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF); } - } - - - - void matrix_init_user(void) { //user initialization } @@ -158,6 +130,6 @@ void matrix_scan_user(void) { //user matrix } - bool process_record_user(uint16_t keycode, keyrecord_t *record) { +bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } diff --git a/keyboards/dztech/dz60rgb/keymaps/hhkb/config.h b/keyboards/dztech/dz60rgb/keymaps/hhkb/config.h index 70f4bde25..2b5e7de6a 100644 --- a/keyboards/dztech/dz60rgb/keymaps/hhkb/config.h +++ b/keyboards/dztech/dz60rgb/keymaps/hhkb/config.h @@ -1,6 +1,2 @@ #pragma once #define dzrgb60_hhkb -#undef DRIVER_1_LED_TOTAL -#undef DRIVER_LED_TOTAL -#define DRIVER_1_LED_TOTAL 62 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL diff --git a/keyboards/dztech/dz60rgb/keymaps/hhkb/keymap.c b/keyboards/dztech/dz60rgb/keymaps/hhkb/keymap.c index 6ba3ac7e6..5a7a56801 100644 --- a/keyboards/dztech/dz60rgb/keymaps/hhkb/keymap.c +++ b/keyboards/dztech/dz60rgb/keymaps/hhkb/keymap.c @@ -39,14 +39,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; +extern led_config_t g_led_config; void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { - rgb_led led; for (int i = 0; i < DRIVER_LED_TOTAL; i++) { - led = g_rgb_leds[i]; - if (led.matrix_co.raw < 0xFF) { - if (led.modifier) { - rgb_matrix_set_color( i, red, green, blue ); - } + if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) { + rgb_matrix_set_color( i, red, green, blue ); } } } diff --git a/keyboards/dztech/dz60rgb/keymaps/hhkb_iso/config.h b/keyboards/dztech/dz60rgb/keymaps/hhkb_iso/config.h index 2bc3519de..8de5853e1 100644 --- a/keyboards/dztech/dz60rgb/keymaps/hhkb_iso/config.h +++ b/keyboards/dztech/dz60rgb/keymaps/hhkb_iso/config.h @@ -1,6 +1,2 @@ #pragma once #define dzrgb60_hhkb_iso -#undef DRIVER_1_LED_TOTAL -#undef DRIVER_LED_TOTAL -#define DRIVER_1_LED_TOTAL 62 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL diff --git a/keyboards/dztech/dz60rgb/keymaps/hhkb_iso/keymap.c b/keyboards/dztech/dz60rgb/keymaps/hhkb_iso/keymap.c index 772eddf07..34c1752ff 100644 --- a/keyboards/dztech/dz60rgb/keymaps/hhkb_iso/keymap.c +++ b/keyboards/dztech/dz60rgb/keymaps/hhkb_iso/keymap.c @@ -39,14 +39,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, TO(0), KC_TRNS, KC_TRNS, KC_TRNS), }; +extern led_config_t g_led_config; void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { - rgb_led led; for (int i = 0; i < DRIVER_LED_TOTAL; i++) { - led = g_rgb_leds[i]; - if (led.matrix_co.raw < 0xFF) { - if (led.modifier) { - rgb_matrix_set_color( i, red, green, blue ); - } + if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) { + rgb_matrix_set_color( i, red, green, blue ); } } } diff --git a/keyboards/dztech/dz60rgb/keymaps/iso/config.h b/keyboards/dztech/dz60rgb/keymaps/iso/config.h index 7ad810a16..c765fe0e2 100644 --- a/keyboards/dztech/dz60rgb/keymaps/iso/config.h +++ b/keyboards/dztech/dz60rgb/keymaps/iso/config.h @@ -1,6 +1,2 @@ #pragma once #define dzrgb60_iso -#undef DRIVER_1_LED_TOTAL -#undef DRIVER_LED_TOTAL -#define DRIVER_1_LED_TOTAL 61 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL diff --git a/keyboards/dztech/dz60rgb/keymaps/iso/keymap.c b/keyboards/dztech/dz60rgb/keymaps/iso/keymap.c index a78e23703..3a90d2f33 100644 --- a/keyboards/dztech/dz60rgb/keymaps/iso/keymap.c +++ b/keyboards/dztech/dz60rgb/keymaps/iso/keymap.c @@ -38,14 +38,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, TO(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), }; +extern led_config_t g_led_config; void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { - rgb_led led; for (int i = 0; i < DRIVER_LED_TOTAL; i++) { - led = g_rgb_leds[i]; - if (led.matrix_co.raw < 0xFF) { - if (led.modifier) { - rgb_matrix_set_color( i, red, green, blue ); - } + if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) { + rgb_matrix_set_color( i, red, green, blue ); } } } diff --git a/keyboards/dztech/dz60rgb/keymaps/matthewrobo/config.h b/keyboards/dztech/dz60rgb/keymaps/matthewrobo/config.h new file mode 100644 index 000000000..b6fb08dc1 --- /dev/null +++ b/keyboards/dztech/dz60rgb/keymaps/matthewrobo/config.h @@ -0,0 +1,60 @@ +#pragma once + +#define FORCE_NKRO + +#define PERMISSIVE_HOLD +#define TAPPING_TERM 150 + +#undef DISABLE_RGB_MATRIX_SPLASH +#undef DISABLE_RGB_MATRIX_MULTISPLASH +#undef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH + + +// #define DISABLE_RGB_MATRIX_ALPHAS_MODS +#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define DISABLE_RGB_MATRIX_BREATHING +#define DISABLE_RGB_MATRIX_CYCLE_ALL +#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN +// #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define DISABLE_RGB_MATRIX_DUAL_BEACON +#define DISABLE_RGB_MATRIX_RAINBOW_BEACON +#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define DISABLE_RGB_MATRIX_RAINDROPS +#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define DISABLE_RGB_MATRIX_DIGITAL_RAIN +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #define DISABLE_RGB_MATRIX_SPLASH +// #define DISABLE_RGB_MATRIX_MULTISPLASH +// #define DISABLE_RGB_MATRIX_SOLID_SPLASH +// #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH + +#define QMK_KEYS_PER_SCAN 4 + +// #define RGB_MATRIX_KEYRELEASES + + +// some speed shit +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +#ifndef NO_DEBUG +#define NO_DEBUG +#endif // !NO_DEBUG +#if !defined(NO_PRINT) && !defined(CONSOLE_ENABLE) +#define NO_PRINT +#endif // !NO_PRINT + +#define NO_ACTION_ONESHOT +#define TAPPING_FORCE_HOLD +#define IGNORE_MOD_TAP_INTERRUPT + +// #include "config_led.h" +// #include "dz60rgb.h" diff --git a/keyboards/dztech/dz60rgb/keymaps/matthewrobo/keymap.c b/keyboards/dztech/dz60rgb/keymaps/matthewrobo/keymap.c new file mode 100644 index 000000000..5c725f5dc --- /dev/null +++ b/keyboards/dztech/dz60rgb/keymaps/matthewrobo/keymap.c @@ -0,0 +1,333 @@ +#include QMK_KEYBOARD_H + +extern bool g_suspend_state; + +enum dz60rgb_layers { + _QWERTY, + _FNM, + _NAV, + _RGB, + _FNC +}; + +enum dz60rgb_keycodes { + REBOOT = SAFE_RANGE, + MAS_CRM, + MAS_PRP, + MAS_RED, + MAS_GRN, + MAS_BLU, + MAS_CYN, + MAS_MGT, + MAS_YEL, + MAS_KEY, + MAS_WHT, +}; +#define _V_V_V_ KC_TRNS +#define LT_CAPS LT(_NAV, KC_CAPS) +#define LT_DEL LT(_RGB, KC_DEL) +extern rgb_config_t rgb_matrix_config; +extern bool autoshift_enabled; +#define MT_SLSH RSFT_T(KC_SLSH) +#define MT_APP RALT_T(KC_APP) +#define LM_LALT LM(_FNM, MOD_LALT) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + LT_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, MT_SLSH, KC_UP, LT_DEL, \ + KC_LCTL, KC_LGUI, LM_LALT, KC_SPC, MT_APP, MO(_FNC), KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [_FNM] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _V_V_V_, _______, _______, _______, _______, _______, _______ \ + ), + [_NAV] = LAYOUT( + KC_NLCK, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_P7, KC_P8, KC_P9, KC_PAST, KC_PMNS, KC_PPLS, KC_DEL, \ + _______, KC_PGUP, KC_HOME, KC_UP, KC_END, _______, _______, KC_P4, KC_P5, KC_P6, KC_PSLS, KC_PSCR, KC_SLCK, KC_INS, \ + _V_V_V_, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_P1, KC_P2, KC_P3, _______, _______, KC_PENT, \ + _______, _______, _______, _______, _______, _______, KC_P0, KC_P0, KC_P0, KC_PDOT, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + [_RGB] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, \ + _______, RGB_MOD, RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, MAS_MGT, MAS_BLU, MAS_WHT, RGB_RMOD, RGB_MOD, _______, \ + _______, RGB_RMOD, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD, _______, MAS_RED, MAS_KEY, MAS_CYN, MAS_PRP, _______, _______, \ + _______, RGB_TOG, _______, _______, _______, _______, _______, MAS_YEL, MAS_GRN, MAS_CRM, _______, _______, _V_V_V_, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + [_FNC] = LAYOUT( // fuck it edition + RCTL(KC_ESC), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_ASTG, \ + RCTL(KC_TAB), RCTL(KC_Q), RCTL(KC_W), RCTL(KC_E), RCTL(KC_R), RCTL(KC_T), RCTL(KC_Y), RCTL(KC_U), RCTL(KC_I), RCTL(KC_O), RCTL(KC_P), RCTL(KC_LBRC), RCTL(KC_RBRC), RCTL(KC_BSLS), \ + RCTL(KC_CAPS), RCTL(KC_A), RCTL(KC_S), RCTL(KC_D), RCTL(KC_F), RCTL(KC_G), RCTL(KC_H), RCTL(KC_J), RCTL(KC_K), RCTL(KC_L), RCTL(KC_SCLN), RCTL(KC_QUOT), RCTL(KC_ENT), \ + RCTL(KC_LSFT), RCTL(KC_Z), RCTL(KC_X), RCTL(KC_C), RCTL(KC_V), REBOOT, RCTL(KC_N), RCTL(KC_M), RCTL(KC_COMM), RCTL(KC_DOT), RCTL(KC_SLSH), KC_VOLU, RCTL(KC_DEL), \ + RCTL(KC_LCTL), RCTL(KC_LGUI), RCTL(KC_LALT), RCTL(KC_SPC), KC_MUTE, _V_V_V_, RCTL(KC_LEFT), KC_VOLD, RCTL(KC_RGHT) \ + ), + /* + [_FNC] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_ASTG, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, REBOOT, _______, _______, _______, _______, RCTL(KC_SLSH), KC_VOLU, RCTL(KC_DEL), \ + _______, _______, _______, _______, KC_MUTE, _______, RCTL(KC_LEFT), KC_VOLD, RCTL(KC_RGHT) \ + ), + [_LAYER] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + [_LAYER] = LAYOUT( + 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, \ + 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14, \ + 40, 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, 28, \ + 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, \ + 62, 61, 60, 59, 58, 57, 56, 55, 54 \ + ), + */ +}; + +void rgb_matrix_indicators_user(void) +{ + uint8_t this_led = host_keyboard_leds(); + + if (!g_suspend_state && rgb_matrix_config.enable) { + switch (biton32(layer_state)) { + case _NAV: + if (this_led & (1 << USB_LED_NUM_LOCK)) { + rgb_matrix_set_color(13, 0xFF, 0x00, 0x00); + rgb_matrix_set_color(19, 0xFF, 0xFF, 0x00); + } else { + rgb_matrix_set_color(13, 0x00, 0x00, 0x00); + rgb_matrix_set_color(19, 0xFF, 0x00, 0x00); + } + + rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF); // layer indicator + // ESDF + rgb_matrix_set_color(24, 0xFF, 0x00, 0x00); + rgb_matrix_set_color(38, 0xFF, 0x00, 0x00); + rgb_matrix_set_color(37, 0xFF, 0x00, 0x00); + rgb_matrix_set_color(36, 0xFF, 0x00, 0x00); + // home/end + rgb_matrix_set_color(25, 0x00, 0xFF, 0x00); + rgb_matrix_set_color(23, 0x00, 0xFF, 0x00); + // pgup/dn + rgb_matrix_set_color(26, 0x00, 0x00, 0xFF); + rgb_matrix_set_color(39, 0x00, 0x00, 0xFF); + // numpad + rgb_matrix_set_color(6, 0xFF, 0xFF, 0x00); + rgb_matrix_set_color(5, 0xFF, 0xFF, 0x00); + rgb_matrix_set_color(4, 0xFF, 0xFF, 0x00); + rgb_matrix_set_color(20, 0xFF, 0xFF, 0x00); + rgb_matrix_set_color(18, 0xFF, 0xFF, 0x00); + rgb_matrix_set_color(33, 0xFF, 0xFF, 0x00); + rgb_matrix_set_color(32, 0xFF, 0xFF, 0x00); + rgb_matrix_set_color(31, 0xFF, 0xFF, 0x00); + // zero + rgb_matrix_set_color(47, 0xFF, 0x00, 0x00); + rgb_matrix_set_color(46, 0xFF, 0x00, 0x00); + rgb_matrix_set_color(45, 0xFF, 0x00, 0x00); + // dot + rgb_matrix_set_color(44, 0x00, 0x00, 0xFF); + // math shit + rgb_matrix_set_color(3, 0x00, 0x00, 0xFF); + rgb_matrix_set_color(2, 0x00, 0x00, 0xFF); + rgb_matrix_set_color(1, 0x00, 0x00, 0xFF); + rgb_matrix_set_color(0, 0x00, 0x00, 0xFF); + rgb_matrix_set_color(17, 0x00, 0x00, 0xFF); + // other + rgb_matrix_set_color(16, 0xFF, 0xFF, 0xFF); + rgb_matrix_set_color(15, 0xFF, 0xFF, 0xFF); + rgb_matrix_set_color(14, 0xFF, 0xFF, 0xFF); + break; + + case _RGB: { + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, rgb_matrix_config.val }; + HSV hui = hsv; + HSV hud = hsv; + HSV sai = hsv; + HSV sad = hsv; + HSV vai = hsv; + HSV vad = hsv; + hui.h = hsv.h + 8; + hud.h = hsv.h - 8; + sai.s = hsv.s + 16 > 255 ? 255 : hsv.s + 16; + sad.s = hsv.s - 16 < 0 ? 0 : hsv.s - 16; + vai.v = hsv.v + 16 > 255 ? 255 : hsv.v + 16; + vad.v = hsv.v - 16 < 0 ? 0 : hsv.v - 16; + RGB rgb = hsv_to_rgb(hsv); + RGB rgbHUI = hsv_to_rgb(hui); + RGB rgbHUD = hsv_to_rgb(hud); + RGB rgbSAI = hsv_to_rgb(sai); + RGB rgbSAD = hsv_to_rgb(sad); + RGB rgbVAI = hsv_to_rgb(vai); + RGB rgbVAD = hsv_to_rgb(vad); + rgb_matrix_set_color(41, 0xFF, 0xFF, 0xFF); // layer indicator + rgb_matrix_set_color(59, rgb.r, rgb.g, rgb.b); // color indicator + rgb_matrix_set_color(26, 0xFF, 0x80, 0x00); //MOD + rgb_matrix_set_color(39, 0xFF, 0x80, 0x00); //MOD + rgb_matrix_set_color(16, 0xFF, 0x80, 0x00); //RGB_RMOD + rgb_matrix_set_color(15, 0xFF, 0x80, 0x00); //MOD + rgb_matrix_set_color(52, 0xFF, 0x40, 0x00); //TOG + rgb_matrix_set_color(25, 0x80, 0x80, 0x80); //SPI + rgb_matrix_set_color(38, 0x80, 0x80, 0x80); //SPD + rgb_matrix_set_color(24, rgbHUI.r, rgbHUI.g, rgbHUI.b); //HUI + rgb_matrix_set_color(37, rgbHUD.r, rgbHUD.g, rgbHUD.b); //HUD + rgb_matrix_set_color(23, rgbSAI.r, rgbSAI.g, rgbSAI.b); //SAI + rgb_matrix_set_color(36, rgbSAD.r, rgbSAD.g, rgbSAD.b); //SAD + rgb_matrix_set_color(22, rgbVAI.r, rgbVAI.g, rgbVAI.b); //VAI + rgb_matrix_set_color(35, rgbVAD.r, rgbVAD.g, rgbVAD.b); //VAD + rgb_matrix_set_color(19, 0xF0, 0x00, 0xFF); //MAS_MGT + rgb_matrix_set_color(18, 0x00, 0x02, 0xFF); //MAS_BLU + rgb_matrix_set_color(33, 0xFF, 0x00, 0x00); //MAS_RED + rgb_matrix_set_color(32, 0x00, 0x00, 0x00); //MAS_KEY + rgb_matrix_set_color(31, 0x00, 0xFF, 0xF7); //MAS_CYN + rgb_matrix_set_color(46, 0xFF, 0xDA, 0x00); //MAS_YEL + rgb_matrix_set_color(45, 0x00, 0xFF, 0x01); //MAS_GRN + rgb_matrix_set_color(44, 0xFF, 0xA5, 0x18); //MAS_CRM + rgb_matrix_set_color(30, 0x81, 0x3C, 0xFF); //MAS_PRP + rgb_matrix_set_color(17, 0xFF, 0xFF, 0xFF); //MAS_WHT + } + break; + + case _FNC: + rgb_matrix_set_color(57, 0xFF, 0xFF, 0xFF); // layer indicator + rgb_matrix_set_color(48, 0xFF, 0x00, 0x00); // bootloader + rgb_matrix_set_color(42, 0x00, 0x80, 0xFF); // vol + rgb_matrix_set_color(55, 0x00, 0x80, 0xFF); + rgb_matrix_set_color(58, 0xFF, 0x00, 0x00); // mute + rgb_matrix_set_color(56, 0xFF, 0x80, 0x00); // ctrl+left/right + rgb_matrix_set_color(54, 0xFF, 0x80, 0x00); + rgb_matrix_set_color(41, 0xFF, 0x00, 0x40); // ctrl+delete + rgb_matrix_set_color(43, 0xFF, 0x00, 0x40); // ctrl+slash + + if (this_led & (1 << !autoshift_enabled)) { + rgb_matrix_set_color(0, 0xFF, 0x00, 0x00); // KC_ASTG + } else { + rgb_matrix_set_color(0, 0xFF, 0xFF, 0x00); + } + + break; + } + } + + if (this_led & (1 << USB_LED_CAPS_LOCK)) { + rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF); + } +} + +void matrix_init_user(void) +{ + //user initialization + autoshift_disable(); +} + +void matrix_scan_user(void) +{ + //user matrix +} + +bool process_record_user(uint16_t keycode, keyrecord_t* record) +{ + static uint32_t key_timer; + + switch (keycode) { + case REBOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + rgb_matrix_enable_noeeprom(); + rgb_matrix_mode_noeeprom(1); + rgb_matrix_sethsv_noeeprom(11, 11, 11); + wait_ms(150); + reset_keyboard(); + } else { + register_code(KC_RCTL); + tap_code(KC_B); + unregister_code(KC_RCTL); + } + } + + return false; + + case MAS_CRM: + if (record->event.pressed) { + rgb_matrix_sethsv(32, 160, 255); + } + + return false; + + case MAS_PRP: + if (record->event.pressed) { + rgb_matrix_sethsv(192, 112, 255); + } + + return false; + + case MAS_RED: + if (record->event.pressed) { + rgb_matrix_sethsv(0, 255, 255); + } + + return false; + + case MAS_GRN: + if (record->event.pressed) { + rgb_matrix_sethsv(88, 255, 255); + } + + return false; + + case MAS_BLU: + if (record->event.pressed) { + rgb_matrix_sethsv(168, 255, 255); + } + + return false; + + case MAS_CYN: + if (record->event.pressed) { + rgb_matrix_sethsv(128, 255, 255); + } + + return false; + + case MAS_MGT: + if (record->event.pressed) { + rgb_matrix_sethsv(216, 255, 255); + } + + return false; + + case MAS_YEL: + if (record->event.pressed) { + rgb_matrix_sethsv(40, 255, 255); + } + + return false; + + case MAS_KEY: + if (record->event.pressed) { + rgb_matrix_sethsv(0, 0, 0); + } + + return false; + + case MAS_WHT: + if (record->event.pressed) { + rgb_matrix_sethsv(128, 0, 255); + } + + return false; + + default: + return true; + } +} diff --git a/keyboards/dztech/dz60rgb/keymaps/matthewrobo/rules.mk b/keyboards/dztech/dz60rgb/keymaps/matthewrobo/rules.mk new file mode 100644 index 000000000..15b8ec1ba --- /dev/null +++ b/keyboards/dztech/dz60rgb/keymaps/matthewrobo/rules.mk @@ -0,0 +1,7 @@ +NKRO_ENABLE = yes # USB Nkey Rollover +AUTO_SHIFT_ENABLE = yes # Auto Shift +# VELOCIKEY_ENABLE = yes + +EXTRAFLAGS += -flto + +# SRC += dz60rgb.c diff --git a/keyboards/dztech/dz60rgb/keymaps/mekanist/keymap.c b/keyboards/dztech/dz60rgb/keymaps/mekanist/keymap.c index 2784f6fa6..a6d1e226b 100644 --- a/keyboards/dztech/dz60rgb/keymaps/mekanist/keymap.c +++ b/keyboards/dztech/dz60rgb/keymaps/mekanist/keymap.c @@ -50,42 +50,36 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -void rgb_matrix_layer_helper(uint8_t red, uint8_t green, uint8_t blue, bool default_layer) -{ - rgb_led led; - - for (int i = 0; i < DRIVER_LED_TOTAL; i++) { - led = g_rgb_leds[i]; - - if (led.matrix_co.raw < 0xFF) { - if (led.modifier) { - rgb_matrix_set_color(i, red, green, blue); - } - } - } +extern led_config_t g_led_config; +void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) { + rgb_matrix_set_color( i, red, green, blue ); + } + } } void rgb_matrix_indicators_user(void) { uint8_t this_led = host_keyboard_leds(); - + if (!g_suspend_state) { switch (biton32(layer_state)) { case _LAYER1: rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break; - + case _LAYER2: rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break; - + case _LAYER4: rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break; } } - + if (this_led & (1 << USB_LED_CAPS_LOCK)) { rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF); } - + switch (biton32(layer_state)) { case _LAYER3: if (this_led & (1 << USB_LED_NUM_LOCK)) { @@ -93,7 +87,7 @@ void rgb_matrix_indicators_user(void) } else { rgb_matrix_set_color(13, 0x00, 0x00, 0x00); } - + rgb_matrix_set_color(0, 0x00, 0xFF, 0x00); rgb_matrix_set_color(1, 0x00, 0x00, 0x00); rgb_matrix_set_color(1, 0x00, 0xFF, 0x00); diff --git a/keyboards/dztech/dz60rgb/mcuconf.h b/keyboards/dztech/dz60rgb/mcuconf.h deleted file mode 100644 index 226da48d5..000000000 --- a/keyboards/dztech/dz60rgb/mcuconf.h +++ /dev/null @@ -1,257 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F3xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -#undef STM32_HSE_BYPASS -// #error "oh no" -// #endif - -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/dztech/dz60rgb/rules.mk b/keyboards/dztech/dz60rgb/rules.mk index cf89c4949..8ff1cbdc2 100644 --- a/keyboards/dztech/dz60rgb/rules.mk +++ b/keyboards/dztech/dz60rgb/rules.mk @@ -1,49 +1,6 @@ -# project specific files - -## chip/board settings -# the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F3xx - -# Linker script to use -# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F303xC - -# Startup code to use -# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f3xx - -# Board: it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -BOARD = GENERIC_STM32_F303XC - -# Cortex version -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 - -USE_FPU = yes - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 -OPT_DEFS = - -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DNO_SUSPEND_POWER_DOWN - -# Options to pass to dfu-util when flashing +MCU = STM32F303 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave - -# Build Options -# comment out to disable the options. -# +DFU_SUFFIX_ARGS = -p DF11 -v 0483 BACKLIGHT_ENABLE = no BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/dztech/dz65rgb/config.h b/keyboards/dztech/dz65rgb/config.h new file mode 100644 index 000000000..8ef9c2390 --- /dev/null +++ b/keyboards/dztech/dz65rgb/config.h @@ -0,0 +1,29 @@ +#pragma once +#include "config_common.h" +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1224 +#define DEVICE_VER 0x0001 +#define MANUFACTURER DZTECH +#define PRODUCT DZ65RGB +#define DESCRIPTION DZ65 ARM RGB keyboard + +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 +#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } +#define MATRIX_COL_PINS {A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14, C15 } +#define DIODE_DIRECTION COL2ROW + +#define RGB_MATRIX_LED_PROCESS_LIMIT 4 +#define RGB_MATRIX_LED_FLUSH_LIMIT 26 +#define DEBOUNCE 3 +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 + +#define DRIVER_ADDR_1 0b1110100 +#define DRIVER_ADDR_2 0b1110111 +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 35 +#define DRIVER_2_LED_TOTAL 33 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL diff --git a/keyboards/dztech/dz65rgb/dz65rgb.c b/keyboards/dztech/dz65rgb/dz65rgb.c new file mode 100644 index 000000000..932d3f68b --- /dev/null +++ b/keyboards/dztech/dz65rgb/dz65rgb.c @@ -0,0 +1,116 @@ +#include "dz65rgb.h" +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { + {0, C2_1, C3_1, C4_1}, // LA0 + {0, C1_1, C3_2, C4_2}, // LA1 + {0, C1_2, C2_2, C4_3}, // LA2 + {0, C1_3, C2_3, C3_3}, // LA3 + {0, C1_4, C2_4, C3_4}, // LA4 + {0, C1_5, C2_5, C3_5}, // LA5 + {0, C1_6, C2_6, C3_6}, // LA6 + {0, C1_7, C2_7, C3_7}, // LA7 + {0, C1_8, C2_8, C3_8}, // LA8 + {0, C9_1, C8_1, C7_1}, // LA9 + {0, C9_2, C8_2, C7_2}, // LA10 + {0, C9_3, C8_3, C7_3}, // LA11 + {0, C9_4, C8_4, C7_4}, // LA12 + {0, C9_5, C8_5, C7_5}, // LA13 + {0, C9_6, C8_6, C7_6}, // LA14 + {0, C9_7, C8_7, C6_6}, // LA15 + {0, C9_8, C7_7, C6_7}, // LA16 + {0, C8_8, C7_8, C6_8}, // LA17 + {0, C2_9, C3_9, C4_9}, // LB0 + {0, C1_9, C3_10, C4_10}, // LB1 + {0, C1_10, C2_10, C4_11}, // LB2 + {0, C1_11, C2_11, C3_11}, // LB3 + //{0, C1_12, C2_12, C3_12}, // LB4 + {0, C1_13, C2_13, C3_13}, // LB5 + {0, C1_14, C2_14, C3_14}, // LB6 + {0, C1_15, C2_15, C3_15}, // LB7 + {0, C1_16, C2_16, C3_16}, // LB8 + {0, C9_9, C8_9, C7_9}, // LB9 + {0, C9_10, C8_10, C7_10}, // LB10 + {0, C9_11, C8_11, C7_11}, // LB11 + {0, C9_12, C8_12, C7_12}, // LB12 + {0, C9_13, C8_13, C7_13}, // LB13 + {0, C9_14, C8_14, C7_14}, // LB14 + {0, C9_15, C8_15, C6_14}, // LB15 + {0, C9_16, C7_15, C6_15}, // LB16 + {0, C8_16, C7_16, C6_16}, // LB17 + {1, C2_1, C3_1, C4_1}, // LC0 + {1, C1_1, C3_2, C4_2}, // LC1 + {1, C1_2, C2_2, C4_3}, // LC2 + {1, C1_3, C2_3, C3_3}, // LC3 + {1, C1_4, C2_4, C3_4}, // LC4 + {1, C1_5, C2_5, C3_5}, // LC5 + //{1, C1_6, C2_6, C3_6}, // LC6 + {1, C1_7, C2_7, C3_7}, // LC7 + {1, C1_8, C2_8, C3_8}, // LC8 + {1, C9_1, C8_1, C7_1}, // LC9 + {1, C9_2, C8_2, C7_2}, // LC10 + {1, C9_3, C8_3, C7_3}, // LC11 + {1, C9_4, C8_4, C7_4}, // LC12 + {1, C9_5, C8_5, C7_5}, // LC13 + {1, C9_6, C8_6, C7_6}, // LC14 + //{1, C9_7, C8_7, C6_6}, // LC15 + {1, C9_8, C7_7, C6_7}, // LC16 + {1, C8_8, C7_8, C6_8}, // LC17 + {1, C2_9, C3_9, C4_9}, // LD0 + {1, C1_9, C3_10, C4_10}, // LD1 + {1, C1_10, C2_10, C4_11}, // LD2 + {1, C1_11, C2_11, C3_11}, // LD3 + {1, C1_12, C2_12, C3_12}, // LD4 + {1, C1_13, C2_13, C3_13}, // LD5 + {1, C1_14, C2_14, C3_14}, // LD6 + {1, C1_15, C2_15, C3_15}, // LD7 + {1, C1_16, C2_16, C3_16}, // LD8 + {1, C9_9, C8_9, C7_9}, // LD9 + {1, C9_10, C8_10, C7_10}, // LD10 + {1, C9_11, C8_11, C7_11}, // LD11 + {1, C9_12, C8_12, C7_12}, // LD12 + //{1, C9_13, C8_13, C7_13}, // LD13 + {1, C9_14, C8_14, C7_14}, // LD14 + {1, C9_15, C8_15, C6_14}, // LD15 + {1, C9_16, C7_15, C6_15}, // LD16 + {1, C8_16, C7_16, C6_16}, // LD17 +}; + +led_config_t g_led_config = { { + { 17, 16, 15, 14, 13, 12, 11, 10, 9, 18, 19, 20, 21, 22, 23 }, + { 7, 6, 5, 4, 3, 2, 1, 0, 26, 27, 28, 29, 30, 31, 24 }, + { 8, 48, 47, 46, 45, 44, 43, 51, 52, 53, 54, 55, NO_LED, 56, 25 }, + { 49, 40, 39, 38, 37, 36, 60, 61, 62, 63, 57, 58, NO_LED, 59, 32 }, + { 50, 42, 41, NO_LED, NO_LED, 35, NO_LED, NO_LED, 64, 65, 66, 67, NO_LED, 34, 33 } +}, { + { 112, 16 }, { 96, 16 }, { 80, 16 }, { 64, 16 }, { 48, 16 }, { 32, 16 }, { 16, 16 }, { 0, 16 }, { 0, 32 }, { 128, 0 }, { 112, 0 }, { 96, 0 }, { 80, 0 }, { 64, 0 }, { 48, 0 }, + { 32, 0 }, { 16, 0 }, { 0, 0 }, { 144, 0 }, { 160, 0 }, { 176, 0 }, { 192, 0 }, { 208, 0 }, { 224, 0 }, { 224, 16 }, { 224, 32 }, { 128, 16 }, { 144, 16 }, { 160, 16 }, { 176, 16 }, + { 192, 16 }, { 208, 16 }, { 224, 48 }, { 224, 64 }, { 208, 64 }, { 80, 64 }, { 80, 48 }, { 64, 48 }, { 48, 48 }, { 32, 48 }, { 16, 48 }, { 32, 64 }, { 16, 64 }, { 96, 32 }, { 80, 32 }, + { 64, 32 }, { 48, 32 }, { 32, 32 }, { 16, 32 }, { 0, 48 }, { 0, 64 }, { 112, 32 }, { 128, 32 }, { 144, 32 }, { 160, 32 }, { 176, 32 }, { 208, 32 }, { 160, 48 }, { 176, 48 }, { 208, 48 }, + { 96, 48 }, { 112, 48 }, { 128, 48 }, { 144, 48 }, { 128, 64 }, { 144, 64 }, { 160, 64 }, { 176, 64 } +}, { + 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 4, 4, 4, 4, + 4, 4, 1, 1, 1, 1, 4, 4, 4, 4, 4, 1, 1, 4, 4, + 4, 4, 4, 4, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 1, 1, 1, 1 +} }; + +void matrix_init_kb(void) { + matrix_init_user(); +} +void matrix_scan_kb(void) { + matrix_scan_user(); +} +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + return process_record_user(keycode, record); +} +void suspend_power_down_kb(void) +{ + rgb_matrix_set_suspend_state(true); + suspend_power_down_user(); +} + +void suspend_wakeup_init_kb(void) +{ + rgb_matrix_set_suspend_state(false); + suspend_wakeup_init_user(); +} diff --git a/keyboards/dztech/dz65rgb/dz65rgb.h b/keyboards/dztech/dz65rgb/dz65rgb.h new file mode 100644 index 000000000..b251a339f --- /dev/null +++ b/keyboards/dztech/dz65rgb/dz65rgb.h @@ -0,0 +1,16 @@ +#pragma once +#define XXX KC_NO +#include "quantum.h" +#define LAYOUT_65_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ + K40, K41, K42, K45, K48, K49, K4A, K4B, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D, K3E }, \ + { K40, K41, K42, XXX, XXX, K45, XXX, XXX, K48, K49, K4A, K4B, XXX, K4D, K4E } \ +} diff --git a/keyboards/dztech/dz65rgb/info.json b/keyboards/dztech/dz65rgb/info.json new file mode 100644 index 000000000..fe61e5d97 --- /dev/null +++ b/keyboards/dztech/dz65rgb/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "dz65rgb", + "url": "", + "maintainer": "dztch", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT_65_ansi": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2},{"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5},{"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75},{"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + } + } +} diff --git a/keyboards/dztech/dz65rgb/keymaps/default/keymap.c b/keyboards/dztech/dz65rgb/keymaps/default/keymap.c new file mode 100644 index 000000000..bce9118f8 --- /dev/null +++ b/keyboards/dztech/dz65rgb/keymaps/default/keymap.c @@ -0,0 +1,41 @@ +#include QMK_KEYBOARD_H +extern bool g_suspend_state; +#define _LAYER0 0 +#define _LAYER1 1 +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_LAYER0] = LAYOUT_65_ansi( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH, KC_PGUP,\ + CTL_T(KC_CAPS),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,\ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,\ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT), + [_LAYER1] = LAYOUT_65_ansi( /* FN */ + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_HOME,\ + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI,RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET, KC_PGUP,\ + CTL_T(KC_CAPS),RGB_SPI, RGB_SPD, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, EEP_RST, KC_PGDN,\ + KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MUTE,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT), +}; + +void rgb_matrix_indicators_user(void) +{ + if (IS_LED_ON(host_keyboard_leds(), USB_LED_CAPS_LOCK)) + { + rgb_matrix_set_color(8, 0xFF, 0xFF, 0xFF); + } +} + +void matrix_init_user(void) +{ + //user initialization +} + +void matrix_scan_user(void) +{ + //user matrix +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) +{ + return true; +} diff --git a/keyboards/dztech/dz65rgb/readme.md b/keyboards/dztech/dz65rgb/readme.md new file mode 100644 index 000000000..7f8aad95f --- /dev/null +++ b/keyboards/dztech/dz65rgb/readme.md @@ -0,0 +1,14 @@ +# DZ65RGB + +A customizable 65% RGB keyboard. + +Keyboard Maintainer: [DZtech](http://keyboarddiy.taobao.com) +Hardware Supported: [DZtech](http://keyboarddiy.taobao.com) +Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/) + + +Make example for this keyboard (after setting up your build environment): + + make dztech/dz65rgb:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/dztech/dz65rgb/rules.mk b/keyboards/dztech/dz65rgb/rules.mk new file mode 100644 index 000000000..bf392b4fa --- /dev/null +++ b/keyboards/dztech/dz65rgb/rules.mk @@ -0,0 +1,14 @@ +MCU = STM32F303 +DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +DFU_SUFFIX_ARGS = -p DF11 -v 0483 +BACKLIGHT_ENABLE = no +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover +AUDIO_ENABLE = no +RGB_MATRIX_ENABLE = yes # Use RGB matrix + +LAYOUTS = 65_ansi |