aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/converter/ibm_5291/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/converter/ibm_5291/readme.md')
-rw-r--r--keyboards/converter/ibm_5291/readme.md72
1 files changed, 72 insertions, 0 deletions
diff --git a/keyboards/converter/ibm_5291/readme.md b/keyboards/converter/ibm_5291/readme.md
new file mode 100644
index 000000000..03406d3f9
--- /dev/null
+++ b/keyboards/converter/ibm_5291/readme.md
@@ -0,0 +1,72 @@
+# IBM 5291 keyboard converter
+
+[IBM 5291](https://deskthority.net/wiki/IBM_Model_F#IBM_5291_Keyboard)
+
+A converter for the eponymous keyboard.
+
+Keyboard Maintainer: [Listofoptions](https://github.com/listofoptions)
+Hardware Supported: IBM 5291, Teensy 2.0
+
+Make example for this keyboard (after setting up your build environment):
+
+ make converter/ibm_5291:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+
+The pinout is as follows:
+
+IBM−5291−Cable to Pinhead−14
+
+| pin | description
+----|------------------------
+1 | GND
+2 | NC
+3 | GND
+4 | GN)
+5 | +5V
+6 | D0
+7 | D1
+8 | D2
+9 | D3
+10| D4
+11| D5
+12| D6
+13| Strobe
+14| Out
+
+The pins on this connector are organized
+![here](https://geekhack.org/index.php?action=dlattach;topic=48950.0;attach=36759;image)
+
+IBM−5291−2 Cable with DB15M connector
+
+| pin | description
+----|-------------
+|1,2,3 | GND
+|4 | +5V
+|5 | D0
+|6 | D1
+|7 | D2
+|8 | D3
+|9 | D4
+|10 | D5
+|11 | D6
+|12 | Strobe
+|13 | Out
+|14 | PE
+|15 | NC
+
+The above connector is actually numbered so it should be easier to determine
+where the needed connections are.
+
+To connect to the teensy, the following are pins are needed (if you should choose not set your own):
+
+* PB0 -> PB6 are connected to D0 -> D6
+* +5V is connected to the corresponding teensy pin
+* gnd is as well, only one of the gnd pins needs to be connected though.
+* strobe is connected to pin PD1
+* data is connected to PD0
+* PE does not need to be connected to anything, but it could also be connected to gnd
+
+sources:
+ http://www.retrocomputing.eu/documents/5291_MaintenanceLibrary.pdf