diff options
Diffstat (limited to 'keyboard/hhkb/doc/V-USB.md')
| -rw-r--r-- | keyboard/hhkb/doc/V-USB.md | 39 |
1 files changed, 0 insertions, 39 deletions
diff --git a/keyboard/hhkb/doc/V-USB.md b/keyboard/hhkb/doc/V-USB.md deleted file mode 100644 index 7ae86f452..000000000 --- a/keyboard/hhkb/doc/V-USB.md +++ /dev/null @@ -1,39 +0,0 @@ -V-USB controller for HHKB -========================= -Not supported actively any more. - -## Build -Use `Makefile.vusb` for [V-USB] controller. - $ make -f Makefile.vusb - -##Hardware -###3. V-USB connection - +---+ +---------------+ - USB GND | | ATmega328p | - ~~~ C3 | | - 5V <-------+--------+---|Vcc,AVCC | HHKB pro pro2 - R1 | | ~~~~~~~~ ~~~~ - D- <----+--+-----R2-----|INT1 PB2-4|------->ROW (6-8) (5-7) - D+ <----|---+----R3-----|INT0 PC0-2|------->COL (9-11) (8-10) - Z1 Z2 | PC3|------->ENABLE (12) (11) - GND<----+---+-----------|GND PB0|<-------KEY (4) (3) - | PB1|------->PREV (5) (4) - | | - GND+-C2--+--|XTAL1 RXD|------->Debug Console - X1 | TXD|<-------Debug Console - GND+-C3--+--|XTAL2 RST|---SW--+GND - +---------------+ - R1: 1.5K Ohm - R2,R3: 68 Ohm - Z1,Z2: Zener 3.6V - C1,C2: 22pF - C3: 0.1uF - X1: Crystal 12MHz - SW: Push Switch(for bootloader) - -- NOTE: See [V-USB] documentation for more detail of hardware and the USB stack. -- NOTE: [USBaspLoader] is very useful for firmware update. - - -[V-USB]: http://www.obdev.at/products/vusb/index.html -[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html |