diff options
Diffstat (limited to 'drivers/boards/BLACKPILL_STM32_F401')
| -rw-r--r-- | drivers/boards/BLACKPILL_STM32_F401/board.c | 269 | ||||
| -rw-r--r-- | drivers/boards/BLACKPILL_STM32_F401/board.h | 1369 | ||||
| -rw-r--r-- | drivers/boards/BLACKPILL_STM32_F401/board.mk | 9 | ||||
| -rw-r--r-- | drivers/boards/BLACKPILL_STM32_F401/cfg/board.chcfg | 1193 | ||||
| -rw-r--r-- | drivers/boards/BLACKPILL_STM32_F401/cfg/board.fmpp | 15 |
5 files changed, 2855 insertions, 0 deletions
diff --git a/drivers/boards/BLACKPILL_STM32_F401/board.c b/drivers/boards/BLACKPILL_STM32_F401/board.c new file mode 100644 index 000000000..a06b52d14 --- /dev/null +++ b/drivers/boards/BLACKPILL_STM32_F401/board.c @@ -0,0 +1,269 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * This file has been automatically generated using ChibiStudio board + * generator plugin. Do not edit manually. + */ + +#include "hal.h" +#include "stm32_gpio.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/** + * @brief Type of STM32 GPIO port setup. + */ +typedef struct { + uint32_t moder; + uint32_t otyper; + uint32_t ospeedr; + uint32_t pupdr; + uint32_t odr; + uint32_t afrl; + uint32_t afrh; +} gpio_setup_t; + +/** + * @brief Type of STM32 GPIO initialization data. + */ +typedef struct { +#if STM32_HAS_GPIOA || defined(__DOXYGEN__) + gpio_setup_t PAData; +#endif +#if STM32_HAS_GPIOB || defined(__DOXYGEN__) + gpio_setup_t PBData; +#endif +#if STM32_HAS_GPIOC || defined(__DOXYGEN__) + gpio_setup_t PCData; +#endif +#if STM32_HAS_GPIOD || defined(__DOXYGEN__) + gpio_setup_t PDData; +#endif +#if STM32_HAS_GPIOE || defined(__DOXYGEN__) + gpio_setup_t PEData; +#endif +#if STM32_HAS_GPIOF || defined(__DOXYGEN__) + gpio_setup_t PFData; +#endif +#if STM32_HAS_GPIOG || defined(__DOXYGEN__) + gpio_setup_t PGData; +#endif +#if STM32_HAS_GPIOH || defined(__DOXYGEN__) + gpio_setup_t PHData; +#endif +#if STM32_HAS_GPIOI || defined(__DOXYGEN__) + gpio_setup_t PIData; +#endif +#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) + gpio_setup_t PJData; +#endif +#if STM32_HAS_GPIOK || defined(__DOXYGEN__) + gpio_setup_t PKData; +#endif +} gpio_config_t; + +/** + * @brief STM32 GPIO static initialization data. + */ +static const gpio_config_t gpio_default_config = { +#if STM32_HAS_GPIOA + {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, + VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, +#endif +#if STM32_HAS_GPIOB + {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, + VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, +#endif +#if STM32_HAS_GPIOC + {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, + VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, +#endif +#if STM32_HAS_GPIOD + {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, + VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, +#endif +#if STM32_HAS_GPIOE + {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, + VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, +#endif +#if STM32_HAS_GPIOF + {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, + VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, +#endif +#if STM32_HAS_GPIOG + {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, + VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, +#endif +#if STM32_HAS_GPIOH + {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, + VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, +#endif +#if STM32_HAS_GPIOI + {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, + VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, +#endif +#if STM32_HAS_GPIOJ + {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, + VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, +#endif +#if STM32_HAS_GPIOK + {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, + VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} +#endif +}; + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { + + gpiop->OTYPER = config->otyper; + gpiop->OSPEEDR = config->ospeedr; + gpiop->PUPDR = config->pupdr; + gpiop->ODR = config->odr; + gpiop->AFRL = config->afrl; + gpiop->AFRH = config->afrh; + gpiop->MODER = config->moder; +} + +static void stm32_gpio_init(void) { + + /* Enabling GPIO-related clocks, the mask comes from the + registry header file.*/ + rccResetAHB1(STM32_GPIO_EN_MASK); + rccEnableAHB1(STM32_GPIO_EN_MASK, true); + + /* Initializing all the defined GPIO ports.*/ +#if STM32_HAS_GPIOA + gpio_init(GPIOA, &gpio_default_config.PAData); +#endif +#if STM32_HAS_GPIOB + gpio_init(GPIOB, &gpio_default_config.PBData); +#endif +#if STM32_HAS_GPIOC + gpio_init(GPIOC, &gpio_default_config.PCData); +#endif +#if STM32_HAS_GPIOD + gpio_init(GPIOD, &gpio_default_config.PDData); +#endif +#if STM32_HAS_GPIOE + gpio_init(GPIOE, &gpio_default_config.PEData); +#endif +#if STM32_HAS_GPIOF + gpio_init(GPIOF, &gpio_default_config.PFData); +#endif +#if STM32_HAS_GPIOG + gpio_init(GPIOG, &gpio_default_config.PGData); +#endif +#if STM32_HAS_GPIOH + gpio_init(GPIOH, &gpio_default_config.PHData); +#endif +#if STM32_HAS_GPIOI + gpio_init(GPIOI, &gpio_default_config.PIData); +#endif +#if STM32_HAS_GPIOJ + gpio_init(GPIOJ, &gpio_default_config.PJData); +#endif +#if STM32_HAS_GPIOK + gpio_init(GPIOK, &gpio_default_config.PKData); +#endif +} + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {} + +/** + * @brief Early initialization code. + * @details GPIO ports and system clocks are initialized before everything + * else. + */ +void __early_init(void) { + enter_bootloader_mode_if_requested(); + + stm32_gpio_init(); + stm32_clock_init(); +} + +#if HAL_USE_SDC || defined(__DOXYGEN__) +/** + * @brief SDC card detection. + */ +bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief SDC card write protection detection. + */ +bool sdc_lld_is_write_protected(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif /* HAL_USE_SDC */ + +#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) +/** + * @brief MMC_SPI card detection. + */ +bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief MMC_SPI card write protection detection. + */ +bool mmc_lld_is_write_protected(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif + +/** + * @brief Board-specific initialization code. + * @todo Add your board-specific code, if any. + */ +void boardInit(void) { + +} diff --git a/drivers/boards/BLACKPILL_STM32_F401/board.h b/drivers/boards/BLACKPILL_STM32_F401/board.h new file mode 100644 index 000000000..38e05f998 --- /dev/null +++ b/drivers/boards/BLACKPILL_STM32_F401/board.h @@ -0,0 +1,1369 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * This file has been automatically generated using ChibiStudio board + * generator plugin. Do not edit manually. + */ + +#ifndef BOARD_H +#define BOARD_H + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/* + * Setup for STM32F401CCU6 black pill board. + */ + +/* + * Board identifier. + */ +#define BOARD_BLACKPILL_STM32_F401 +#define BOARD_NAME "STM32F401CCU6 blackpill" + +/* + * Allow Board to boot USB without extra A9 hardware/software config + */ +#define BOARD_OTG_NOVBUSSENS 1 + +/* + * Board oscillators-related settings. + */ +#if !defined(STM32_LSECLK) +#define STM32_LSECLK 32768U +#endif + +#if !defined(STM32_HSECLK) +#define STM32_HSECLK 25000000U +#endif + +/* + * Board voltages. + * Required for performance limits calculation. + */ +#define STM32_VDD 300U + +/* + * MCU type as defined in the ST header. + */ +#define STM32F401xC + +/* + * IO pins assignments. + */ +#define GPIOA_BUTTON 0U +#define GPIOA_PIN1 1U +#define GPIOA_PIN2 2U +#define GPIOA_PIN3 3U +#define GPIOA_CS43L22_LRCK 4U +#define GPIOA_L3GD20_SCL 5U +#define GPIOA_L3GD20_SD0 6U +#define GPIOA_L3GD20_SDI 7U +#define GPIOA_PIN8 8U +#define GPIOA_VBUS_FS 9U +#define GPIOA_OTG_FS_ID 10U +#define GPIOA_OTG_FS_DM 11U +#define GPIOA_OTG_FS_DP 12U +#define GPIOA_SWDIO 13U +#define GPIOA_SWCLK 14U +#define GPIOA_PIN15 15U + +#define GPIOB_PIN0 0U +#define GPIOB_PIN1 1U +#define GPIOB_PIN2 2U +#define GPIOB_SWO 3U +#define GPIOB_PIN4 4U +#define GPIOB_PIN5 5U +#define GPIOB_LSM303DLHC_SCL 6U +#define GPIOB_PIN7 7U +#define GPIOB_PIN8 8U +#define GPIOB_LSM303DLHC_SDA 9U +#define GPIOB_MP45DT02_CLK_IN 10U +#define GPIOB_PIN11 11U +#define GPIOB_PIN12 12U +#define GPIOB_PIN13 13U +#define GPIOB_PIN14 14U +#define GPIOB_PIN15 15U + +#define GPIOC_OTG_FS_POWER_ON 0U +#define GPIOC_PIN1 1U +#define GPIOC_PIN2 2U +#define GPIOC_CS43L22_AIN4x 3U +#define GPIOC_MP45DT02_PDM_OUT 3U +#define GPIOC_PIN4 4U +#define GPIOC_PIN5 5U +#define GPIOC_PIN6 6U +#define GPIOC_CS43L22_MCLK 7U +#define GPIOC_PIN8 8U +#define GPIOC_PIN9 9U +#define GPIOC_CS43L22_SCLK 10U +#define GPIOC_PIN11 11U +#define GPIOC_CS43L22_SDIN 12U +#define GPIOC_PIN13 13U +#define GPIOC_OSC32_IN 14U +#define GPIOC_OSC32_OUT 15U + +#define GPIOD_PIN0 0U +#define GPIOD_PIN1 1U +#define GPIOD_PIN2 2U +#define GPIOD_PIN3 3U +#define GPIOD_CS43L22_RESET 4U +#define GPIOD_OverCurrent 5U +#define GPIOD_PIN6 6U +#define GPIOD_PIN7 7U +#define GPIOD_PIN8 8U +#define GPIOD_PIN9 9U +#define GPIOD_PIN10 10U +#define GPIOD_PIN11 11U +#define GPIOD_LED4 12U +#define GPIOD_LED3 13U +#define GPIOD_LED5 14U +#define GPIOD_LED6 15U + +#define GPIOE_L3GD20_INT1 0U +#define GPIOE_L3GD20_INT2 1U +#define GPIOE_LSM303DLHC_DRDY 2U +#define GPIOE_L3GD20_CS 3U +#define GPIOE_LSM303DLHC_INT1 4U +#define GPIOE_LSM303DLHC_INT2 5U +#define GPIOE_PIN6 6U +#define GPIOE_PIN7 7U +#define GPIOE_PIN8 8U +#define GPIOE_PIN9 9U +#define GPIOE_PIN10 10U +#define GPIOE_PIN11 11U +#define GPIOE_PIN12 12U +#define GPIOE_PIN13 13U +#define GPIOE_PIN14 14U +#define GPIOE_PIN15 15U + +#define GPIOF_PIN0 0U +#define GPIOF_PIN1 1U +#define GPIOF_PIN2 2U +#define GPIOF_PIN3 3U +#define GPIOF_PIN4 4U +#define GPIOF_PIN5 5U +#define GPIOF_PIN6 6U +#define GPIOF_PIN7 7U +#define GPIOF_PIN8 8U +#define GPIOF_PIN9 9U +#define GPIOF_PIN10 10U +#define GPIOF_PIN11 11U +#define GPIOF_PIN12 12U +#define GPIOF_PIN13 13U +#define GPIOF_PIN14 14U +#define GPIOF_PIN15 15U + +#define GPIOG_PIN0 0U +#define GPIOG_PIN1 1U +#define GPIOG_PIN2 2U +#define GPIOG_PIN3 3U +#define GPIOG_PIN4 4U +#define GPIOG_PIN5 5U +#define GPIOG_PIN6 6U +#define GPIOG_PIN7 7U +#define GPIOG_PIN8 8U +#define GPIOG_PIN9 9U +#define GPIOG_PIN10 10U +#define GPIOG_PIN11 11U +#define GPIOG_PIN12 12U +#define GPIOG_PIN13 13U +#define GPIOG_PIN14 14U +#define GPIOG_PIN15 15U + +#define GPIOH_OSC_IN 0U +#define GPIOH_OSC_OUT 1U +#define GPIOH_PIN2 2U +#define GPIOH_PIN3 3U +#define GPIOH_PIN4 4U +#define GPIOH_PIN5 5U +#define GPIOH_PIN6 6U +#define GPIOH_PIN7 7U +#define GPIOH_PIN8 8U +#define GPIOH_PIN9 9U +#define GPIOH_PIN10 10U +#define GPIOH_PIN11 11U +#define GPIOH_PIN12 12U +#define GPIOH_PIN13 13U +#define GPIOH_PIN14 14U +#define GPIOH_PIN15 15U + +#define GPIOI_PIN0 0U +#define GPIOI_PIN1 1U +#define GPIOI_PIN2 2U +#define GPIOI_PIN3 3U +#define GPIOI_PIN4 4U +#define GPIOI_PIN5 5U +#define GPIOI_PIN6 6U +#define GPIOI_PIN7 7U +#define GPIOI_PIN8 8U +#define GPIOI_PIN9 9U +#define GPIOI_PIN10 10U +#define GPIOI_PIN11 11U +#define GPIOI_PIN12 12U +#define GPIOI_PIN13 13U +#define GPIOI_PIN14 14U +#define GPIOI_PIN15 15U + +/* + * IO lines assignments. + */ +#define LINE_BUTTON PAL_LINE(GPIOA, 0U) +#define LINE_CS43L22_LRCK PAL_LINE(GPIOA, 4U) +#define LINE_L3GD20_SCL PAL_LINE(GPIOA, 5U) +#define LINE_L3GD20_SD0 PAL_LINE(GPIOA, 6U) +#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U) +#define LINE_VBUS_FS PAL_LINE(GPIOA, 9U) +#define LINE_OTG_FS_ID PAL_LINE(GPIOA, 10U) +#define LINE_OTG_FS_DM PAL_LINE(GPIOA, 11U) +#define LINE_OTG_FS_DP PAL_LINE(GPIOA, 12U) +#define LINE_SWDIO PAL_LINE(GPIOA, 13U) +#define LINE_SWCLK PAL_LINE(GPIOA, 14U) +#define LINE_SWO PAL_LINE(GPIOB, 3U) +#define LINE_LSM303DLHC_SCL PAL_LINE(GPIOB, 6U) +#define LINE_LSM303DLHC_SDA PAL_LINE(GPIOB, 9U) +#define LINE_MP45DT02_CLK_IN PAL_LINE(GPIOB, 10U) +#define LINE_OTG_FS_POWER_ON PAL_LINE(GPIOC, 0U) +#define LINE_CS43L22_AIN4x PAL_LINE(GPIOC, 3U) +#define LINE_MP45DT02_PDM_OUT PAL_LINE(GPIOC, 3U) +#define LINE_CS43L22_MCLK PAL_LINE(GPIOC, 7U) +#define LINE_CS43L22_SCLK PAL_LINE(GPIOC, 10U) +#define LINE_CS43L22_SDIN PAL_LINE(GPIOC, 12U) +#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) +#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) +#define LINE_CS43L22_RESET PAL_LINE(GPIOD, 4U) +#define LINE_OverCurrent PAL_LINE(GPIOD, 5U) +#define LINE_LED4 PAL_LINE(GPIOD, 12U) +#define LINE_LED3 PAL_LINE(GPIOD, 13U) +#define LINE_LED5 PAL_LINE(GPIOD, 14U) +#define LINE_LED6 PAL_LINE(GPIOD, 15U) +#define LINE_L3GD20_INT1 PAL_LINE(GPIOE, 0U) +#define LINE_L3GD20_INT2 PAL_LINE(GPIOE, 1U) +#define LINE_LSM303DLHC_DRDY PAL_LINE(GPIOE, 2U) +#define LINE_L3GD20_CS PAL_LINE(GPIOE, 3U) +#define LINE_LSM303DLHC_INT1 PAL_LINE(GPIOE, 4U) +#define LINE_LSM303DLHC_INT2 PAL_LINE(GPIOE, 5U) +#define LINE_OSC_IN PAL_LINE(GPIOH, 0U) +#define LINE_OSC_OUT PAL_LINE(GPIOH, 1U) + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * Please refer to the STM32 Reference Manual for details. + */ +#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) +#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) +#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) +#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) +#define PIN_ODR_LOW(n) (0U << (n)) +#define PIN_ODR_HIGH(n) (1U << (n)) +#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) +#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) +#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) +#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) +#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) +#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) +#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) +#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) +#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) +#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) + +/* + * GPIOA setup: + * + * PA0 - BUTTON (input floating). + * PA1 - PIN1 (input pullup). + * PA2 - PIN2 (input pullup). + * PA3 - PIN3 (input pullup). + * PA4 - CS43L22_LRCK (alternate 6). + * PA5 - L3GD20_SCL (alternate 5). + * PA6 - L3GD20_SD0 (alternate 5). + * PA7 - L3GD20_SDI (alternate 5). + * PA8 - PIN8 (input pullup). + * PA9 - VBUS_FS (input floating). + * PA10 - OTG_FS_ID (alternate 10). + * PA11 - OTG_FS_DM (alternate 10). + * PA12 - OTG_FS_DP (alternate 10). + * PA13 - SWDIO (alternate 0). + * PA14 - SWCLK (alternate 0). + * PA15 - PIN15 (input pullup). + */ +#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \ + PIN_MODE_INPUT(GPIOA_PIN1) | \ + PIN_MODE_INPUT(GPIOA_PIN2) | \ + PIN_MODE_INPUT(GPIOA_PIN3) | \ + PIN_MODE_ALTERNATE(GPIOA_CS43L22_LRCK) |\ + PIN_MODE_ALTERNATE(GPIOA_L3GD20_SCL) | \ + PIN_MODE_ALTERNATE(GPIOA_L3GD20_SD0) | \ + PIN_MODE_ALTERNATE(GPIOA_L3GD20_SDI) | \ + PIN_MODE_INPUT(GPIOA_PIN8) | \ + PIN_MODE_INPUT(GPIOA_VBUS_FS) | \ + PIN_MODE_ALTERNATE(GPIOA_OTG_FS_ID) | \ + PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \ + PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \ + PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ + PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ + PIN_MODE_INPUT(GPIOA_PIN15)) +#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOA_CS43L22_LRCK) |\ + PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SCL) | \ + PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SD0) | \ + PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SDI) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOA_VBUS_FS) | \ + PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_ID) | \ + PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | \ + PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) +#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_HIGH(GPIOA_BUTTON) | \ + PIN_OSPEED_HIGH(GPIOA_PIN1) | \ + PIN_OSPEED_HIGH(GPIOA_PIN2) | \ + PIN_OSPEED_HIGH(GPIOA_PIN3) | \ + PIN_OSPEED_HIGH(GPIOA_CS43L22_LRCK) | \ + PIN_OSPEED_HIGH(GPIOA_L3GD20_SCL) | \ + PIN_OSPEED_HIGH(GPIOA_L3GD20_SD0) | \ + PIN_OSPEED_HIGH(GPIOA_L3GD20_SDI) | \ + PIN_OSPEED_HIGH(GPIOA_PIN8) | \ + PIN_OSPEED_HIGH(GPIOA_VBUS_FS) | \ + PIN_OSPEED_HIGH(GPIOA_OTG_FS_ID) | \ + PIN_OSPEED_HIGH(GPIOA_OTG_FS_DM) | \ + PIN_OSPEED_HIGH(GPIOA_OTG_FS_DP) | \ + PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ + PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ + PIN_OSPEED_HIGH(GPIOA_PIN15)) +#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ + PIN_PUPDR_FLOATING(GPIOA_CS43L22_LRCK) |\ + PIN_PUPDR_FLOATING(GPIOA_L3GD20_SCL) | \ + PIN_PUPDR_PULLUP(GPIOA_L3GD20_SD0) | \ + PIN_PUPDR_PULLUP(GPIOA_L3GD20_SDI) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ + PIN_PUPDR_FLOATING(GPIOA_VBUS_FS) | \ + PIN_PUPDR_FLOATING(GPIOA_OTG_FS_ID) | \ + PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | \ + PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | \ + PIN_PUPDR_FLOATING(GPIOA_SWDIO) | \ + PIN_PUPDR_FLOATING(GPIOA_SWCLK) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN15)) +#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \ + PIN_ODR_HIGH(GPIOA_PIN1) | \ + PIN_ODR_HIGH(GPIOA_PIN2) | \ + PIN_ODR_HIGH(GPIOA_PIN3) | \ + PIN_ODR_HIGH(GPIOA_CS43L22_LRCK) | \ + PIN_ODR_HIGH(GPIOA_L3GD20_SCL) | \ + PIN_ODR_HIGH(GPIOA_L3GD20_SD0) | \ + PIN_ODR_HIGH(GPIOA_L3GD20_SDI) | \ + PIN_ODR_HIGH(GPIOA_PIN8) | \ + PIN_ODR_HIGH(GPIOA_VBUS_FS) | \ + PIN_ODR_HIGH(GPIOA_OTG_FS_ID) | \ + PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | \ + PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | \ + PIN_ODR_HIGH(GPIOA_SWDIO) | \ + PIN_ODR_HIGH(GPIOA_SWCLK) | \ + PIN_ODR_HIGH(GPIOA_PIN15)) +#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOA_CS43L22_LRCK, 6U) | \ + PIN_AFIO_AF(GPIOA_L3GD20_SCL, 5U) | \ + PIN_AFIO_AF(GPIOA_L3GD20_SD0, 5U) | \ + PIN_AFIO_AF(GPIOA_L3GD20_SDI, 5U)) +#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOA_VBUS_FS, 0U) | \ + PIN_AFIO_AF(GPIOA_OTG_FS_ID, 10U) | \ + PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10U) | \ + PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10U) | \ + PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ + PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN15, 0U)) + +/* + * GPIOB setup: + * + * PB0 - PIN0 (input pullup). + * PB1 - PIN1 (input pullup). + * PB2 - PIN2 (input pullup). + * PB3 - SWO (alternate 0). + * PB4 - PIN4 (input pullup). + * PB5 - PIN5 (input pullup). + * PB6 - LSM303DLHC_SCL (alternate 4). + * PB7 - PIN7 (input pullup). + * PB8 - PIN8 (input pullup). + * PB9 - LSM303DLHC_SDA (alternate 4). + * PB10 - MP45DT02_CLK_IN (alternate 5). + * PB11 - PIN11 (input pullup). + * PB12 - PIN12 (input pullup). + * PB13 - PIN13 (input pullup). + * PB14 - PIN14 (input pullup). + * PB15 - PIN15 (input pullup). + */ +#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ + PIN_MODE_INPUT(GPIOB_PIN1) | \ + PIN_MODE_INPUT(GPIOB_PIN2) | \ + PIN_MODE_ALTERNATE(GPIOB_SWO) | \ + PIN_MODE_INPUT(GPIOB_PIN4) | \ + PIN_MODE_INPUT(GPIOB_PIN5) | \ + PIN_MODE_ALTERNATE(GPIOB_LSM303DLHC_SCL) |\ + PIN_MODE_INPUT(GPIOB_PIN7) | \ + PIN_MODE_INPUT(GPIOB_PIN8) | \ + PIN_MODE_ALTERNATE(GPIOB_LSM303DLHC_SDA) |\ + PIN_MODE_ALTERNATE(GPIOB_MP45DT02_CLK_IN) |\ + PIN_MODE_INPUT(GPIOB_PIN11) | \ + PIN_MODE_INPUT(GPIOB_PIN12) | \ + PIN_MODE_INPUT(GPIOB_PIN13) | \ + PIN_MODE_INPUT(GPIOB_PIN14) | \ + PIN_MODE_INPUT(GPIOB_PIN15)) +#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOB_SWO) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOB_LSM303DLHC_SCL) |\ + PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOB_LSM303DLHC_SDA) |\ + PIN_OTYPE_PUSHPULL(GPIOB_MP45DT02_CLK_IN) |\ + PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) +#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_HIGH(GPIOB_PIN0) | \ + PIN_OSPEED_HIGH(GPIOB_PIN1) | \ + PIN_OSPEED_HIGH(GPIOB_PIN2) | \ + PIN_OSPEED_HIGH(GPIOB_SWO) | \ + PIN_OSPEED_HIGH(GPIOB_PIN4) | \ + PIN_OSPEED_HIGH(GPIOB_PIN5) | \ + PIN_OSPEED_HIGH(GPIOB_LSM303DLHC_SCL) |\ + PIN_OSPEED_HIGH(GPIOB_PIN7) | \ + PIN_OSPEED_HIGH(GPIOB_PIN8) | \ + PIN_OSPEED_HIGH(GPIOB_LSM303DLHC_SDA) |\ + PIN_OSPEED_HIGH(GPIOB_MP45DT02_CLK_IN) |\ + PIN_OSPEED_HIGH(GPIOB_PIN11) | \ + PIN_OSPEED_HIGH(GPIOB_PIN12) | \ + PIN_OSPEED_HIGH(GPIOB_PIN13) | \ + PIN_OSPEED_HIGH(GPIOB_PIN14) | \ + PIN_OSPEED_HIGH(GPIOB_PIN15)) +#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOB_SWO) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ + PIN_PUPDR_FLOATING(GPIOB_LSM303DLHC_SCL) |\ + PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ + PIN_PUPDR_FLOATING(GPIOB_LSM303DLHC_SDA) |\ + PIN_PUPDR_FLOATING(GPIOB_MP45DT02_CLK_IN) |\ + PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN15)) +#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ + PIN_ODR_HIGH(GPIOB_PIN1) | \ + PIN_ODR_HIGH(GPIOB_PIN2) | \ + PIN_ODR_HIGH(GPIOB_SWO) | \ + PIN_ODR_HIGH(GPIOB_PIN4) | \ + PIN_ODR_HIGH(GPIOB_PIN5) | \ + PIN_ODR_HIGH(GPIOB_LSM303DLHC_SCL) | \ + PIN_ODR_HIGH(GPIOB_PIN7) | \ + PIN_ODR_HIGH(GPIOB_PIN8) | \ + PIN_ODR_HIGH(GPIOB_LSM303DLHC_SDA) | \ + PIN_ODR_HIGH(GPIOB_MP45DT02_CLK_IN) | \ + PIN_ODR_HIGH(GPIOB_PIN11) | \ + PIN_ODR_HIGH(GPIOB_PIN12) | \ + PIN_ODR_HIGH(GPIOB_PIN13) | \ + PIN_ODR_HIGH(GPIOB_PIN14) | \ + PIN_ODR_HIGH(GPIOB_PIN15)) +#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOB_SWO, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOB_LSM303DLHC_SCL, 4U) |\ + PIN_AFIO_AF(GPIOB_PIN7, 0U)) +#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOB_LSM303DLHC_SDA, 4U) |\ + PIN_AFIO_AF(GPIOB_MP45DT02_CLK_IN, 5U) |\ + PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN15, 0U)) + +/* + * GPIOC setup: + * + * PC0 - OTG_FS_POWER_ON (output pushpull maximum). + * PC1 - PIN1 (input pullup). + * PC2 - PIN2 (input pullup). + * PC3 - CS43L22_AIN4x MP45DT02_PDM_OUT(alternate 5). + * PC4 - PIN4 (input pullup). + * PC5 - PIN5 (input pullup). + * PC6 - PIN6 (input pullup). + * PC7 - CS43L22_MCLK (alternate 6). + * PC8 - PIN8 (input pullup). + * PC9 - PIN9 (input pullup). + * PC10 - CS43L22_SCLK (alternate 6). + * PC11 - PIN11 (input pullup). + * PC12 - CS43L22_SDIN (alternate 6). + * PC13 - PIN13 (input pullup). + * PC14 - OSC32_IN (input floating). + * PC15 - OSC32_OUT (input floating). + */ +#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_OTG_FS_POWER_ON) |\ + PIN_MODE_INPUT(GPIOC_PIN1) | \ + PIN_MODE_INPUT(GPIOC_PIN2) | \ + PIN_MODE_ALTERNATE(GPIOC_CS43L22_AIN4x) |\ + PIN_MODE_INPUT(GPIOC_PIN4) | \ + PIN_MODE_INPUT(GPIOC_PIN5) | \ + PIN_MODE_INPUT(GPIOC_PIN6) | \ + PIN_MODE_ALTERNATE(GPIOC_CS43L22_MCLK) |\ + PIN_MODE_INPUT(GPIOC_PIN8) | \ + PIN_MODE_INPUT(GPIOC_PIN9) | \ + PIN_MODE_ALTERNATE(GPIOC_CS43L22_SCLK) |\ + PIN_MODE_INPUT(GPIOC_PIN11) | \ + PIN_MODE_ALTERNATE(GPIOC_CS43L22_SDIN) |\ + PIN_MODE_INPUT(GPIOC_PIN13) | \ + PIN_MODE_INPUT(GPIOC_OSC32_IN) | \ + PIN_MODE_INPUT(GPIOC_OSC32_OUT)) +#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_OTG_FS_POWER_ON) |\ + PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_AIN4x) |\ + PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_MCLK) |\ + PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_SCLK) |\ + PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_SDIN) |\ + PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \ + PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) +#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_OTG_FS_POWER_ON) |\ + PIN_OSPEED_HIGH(GPIOC_PIN1) | \ + PIN_OSPEED_HIGH(GPIOC_PIN2) | \ + PIN_OSPEED_HIGH(GPIOC_CS43L22_AIN4x) | \ + PIN_OSPEED_HIGH(GPIOC_PIN4) | \ + PIN_OSPEED_HIGH(GPIOC_PIN5) | \ + PIN_OSPEED_HIGH(GPIOC_PIN6) | \ + PIN_OSPEED_HIGH(GPIOC_CS43L22_MCLK) | \ + PIN_OSPEED_HIGH(GPIOC_PIN8) | \ + PIN_OSPEED_HIGH(GPIOC_PIN9) | \ + PIN_OSPEED_HIGH(GPIOC_CS43L22_SCLK) | \ + PIN_OSPEED_HIGH(GPIOC_PIN11) | \ + PIN_OSPEED_HIGH(GPIOC_CS43L22_SDIN) | \ + PIN_OSPEED_HIGH(GPIOC_PIN13) | \ + PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \ + PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) +#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_OTG_FS_POWER_ON) |\ + PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ + PIN_PUPDR_FLOATING(GPIOC_CS43L22_AIN4x) |\ + PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOC_CS43L22_MCLK) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOC_CS43L22_SCLK) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOC_CS43L22_SDIN) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ + PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \ + PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) +#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_OTG_FS_POWER_ON) | \ + PIN_ODR_HIGH(GPIOC_PIN1) | \ + PIN_ODR_HIGH(GPIOC_PIN2) | \ + PIN_ODR_HIGH(GPIOC_CS43L22_AIN4x) | \ + PIN_ODR_HIGH(GPIOC_PIN4) | \ + PIN_ODR_HIGH(GPIOC_PIN5) | \ + PIN_ODR_HIGH(GPIOC_PIN6) | \ + PIN_ODR_HIGH(GPIOC_CS43L22_MCLK) | \ + PIN_ODR_HIGH(GPIOC_PIN8) | \ + PIN_ODR_HIGH(GPIOC_PIN9) | \ + PIN_ODR_HIGH(GPIOC_CS43L22_SCLK) | \ + PIN_ODR_HIGH(GPIOC_PIN11) | \ + PIN_ODR_HIGH(GPIOC_CS43L22_SDIN) | \ + PIN_ODR_HIGH(GPIOC_PIN13) | \ + PIN_ODR_HIGH(GPIOC_OSC32_IN) | \ + PIN_ODR_HIGH(GPIOC_OSC32_OUT)) +#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_OTG_FS_POWER_ON, 0U) |\ + PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOC_CS43L22_AIN4x, 5U) | \ + PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOC_CS43L22_MCLK, 6U)) +#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOC_CS43L22_SCLK, 6U) | \ + PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOC_CS43L22_SDIN, 6U) | \ + PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \ + PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) + +/* + * GPIOD setup: + * + * PD0 - PIN0 (input pullup). + * PD1 - PIN1 (input pullup). + * PD2 - PIN2 (input pullup). + * PD3 - PIN3 (input pullup). + * PD4 - CS43L22_RESET (output pushpull maximum). + * PD5 - OverCurrent (input floating). + * PD6 - PIN6 (input pullup). + * PD7 - PIN7 (input pullup). + * PD8 - PIN8 (input pullup). + * PD9 - PIN9 (input pullup). + * PD10 - PIN10 (input pullup). + * PD11 - PIN11 (input pullup). + * PD12 - LED4 (output pushpull maximum). + * PD13 - LED3 (output pushpull maximum). + * PD14 - LED5 (output pushpull maximum). + * PD15 - LED6 (output pushpull maximum). + */ +#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ + PIN_MODE_INPUT(GPIOD_PIN1) | \ + PIN_MODE_INPUT(GPIOD_PIN2) | \ + PIN_MODE_INPUT(GPIOD_PIN3) | \ + PIN_MODE_OUTPUT(GPIOD_CS43L22_RESET) | \ + PIN_MODE_INPUT(GPIOD_OverCurrent) | \ + PIN_MODE_INPUT(GPIOD_PIN6) | \ + PIN_MODE_INPUT(GPIOD_PIN7) | \ + PIN_MODE_INPUT(GPIOD_PIN8) | \ + PIN_MODE_INPUT(GPIOD_PIN9) | \ + PIN_MODE_INPUT(GPIOD_PIN10) | \ + PIN_MODE_INPUT(GPIOD_PIN11) | \ + PIN_MODE_OUTPUT(GPIOD_LED4) | \ + PIN_MODE_OUTPUT(GPIOD_LED3) | \ + PIN_MODE_OUTPUT(GPIOD_LED5) | \ + PIN_MODE_OUTPUT(GPIOD_LED6)) +#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOD_CS43L22_RESET) |\ + PIN_OTYPE_PUSHPULL(GPIOD_OverCurrent) |\ + PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOD_LED4) | \ + PIN_OTYPE_PUSHPULL(GPIOD_LED3) | \ + PIN_OTYPE_PUSHPULL(GPIOD_LED5) | \ + PIN_OTYPE_PUSHPULL(GPIOD_LED6)) +#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | \ + PIN_OSPEED_HIGH(GPIOD_PIN1) | \ + PIN_OSPEED_HIGH(GPIOD_PIN2) | \ + PIN_OSPEED_HIGH(GPIOD_PIN3) | \ + PIN_OSPEED_HIGH(GPIOD_CS43L22_RESET) | \ + PIN_OSPEED_HIGH(GPIOD_OverCurrent) | \ + PIN_OSPEED_HIGH(GPIOD_PIN6) | \ + PIN_OSPEED_HIGH(GPIOD_PIN7) | \ + PIN_OSPEED_HIGH(GPIOD_PIN8) | \ + PIN_OSPEED_HIGH(GPIOD_PIN9) | \ + PIN_OSPEED_HIGH(GPIOD_PIN10) | \ + PIN_OSPEED_HIGH(GPIOD_PIN11) | \ + PIN_OSPEED_HIGH(GPIOD_LED4) | \ + PIN_OSPEED_HIGH(GPIOD_LED3) | \ + PIN_OSPEED_HIGH(GPIOD_LED5) | \ + PIN_OSPEED_HIGH(GPIOD_LED6)) +#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOD_CS43L22_RESET) |\ + PIN_PUPDR_FLOATING(GPIOD_OverCurrent) |\ + PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ + PIN_PUPDR_FLOATING(GPIOD_LED4) | \ + PIN_PUPDR_FLOATING(GPIOD_LED3) | \ + PIN_PUPDR_FLOATING(GPIOD_LED5) | \ + PIN_PUPDR_FLOATING(GPIOD_LED6)) +#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ + PIN_ODR_HIGH(GPIOD_PIN1) | \ + PIN_ODR_HIGH(GPIOD_PIN2) | \ + PIN_ODR_HIGH(GPIOD_PIN3) | \ + PIN_ODR_HIGH(GPIOD_CS43L22_RESET) | \ + PIN_ODR_HIGH(GPIOD_OverCurrent) | \ + PIN_ODR_HIGH(GPIOD_PIN6) | \ + PIN_ODR_HIGH(GPIOD_PIN7) | \ + PIN_ODR_HIGH(GPIOD_PIN8) | \ + PIN_ODR_HIGH(GPIOD_PIN9) | \ + PIN_ODR_HIGH(GPIOD_PIN10) | \ + PIN_ODR_HIGH(GPIOD_PIN11) | \ + PIN_ODR_LOW(GPIOD_LED4) | \ + PIN_ODR_LOW(GPIOD_LED3) | \ + PIN_ODR_LOW(GPIOD_LED5) | \ + PIN_ODR_LOW(GPIOD_LED6)) +#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOD_CS43L22_RESET, 0U) | \ + PIN_AFIO_AF(GPIOD_OverCurrent, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN7, 0U)) +#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOD_LED4, 0U) | \ + PIN_AFIO_AF(GPIOD_LED3, 0U) | \ + PIN_AFIO_AF(GPIOD_LED5, 0U) | \ + PIN_AFIO_AF(GPIOD_LED6, 0U)) + +/* + * GPIOE setup: + * + * PE0 - L3GD20_INT1 (input pullup). + * PE1 - L3GD20_INT2 (input pullup). + * PE2 - LSM303DLHC_DRDY (input floating). + * PE3 - L3GD20_CS (output pushpull maximum). + * PE4 - LSM303DLHC_INT1 (output pushpull maximum). + * PE5 - LSM303DLHC_INT2 (output pushpull maximum). + * PE6 - PIN6 (input pullup). + * PE7 - PIN7 (input pullup). + * PE8 - PIN8 (input pullup). + * PE9 - PIN9 (input pullup). + * PE10 - PIN10 (input pullup). + * PE11 - PIN11 (input pullup). + * PE12 - PIN12 (input pullup). + * PE13 - PIN13 (input pullup). + * PE14 - PIN14 (input pullup). + * PE15 - PIN15 (input pullup). + */ +#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_L3GD20_INT1) | \ + PIN_MODE_INPUT(GPIOE_L3GD20_INT2) | \ + PIN_MODE_INPUT(GPIOE_LSM303DLHC_DRDY) |\ + PIN_MODE_OUTPUT(GPIOE_L3GD20_CS) | \ + PIN_MODE_OUTPUT(GPIOE_LSM303DLHC_INT1) |\ + PIN_MODE_OUTPUT(GPIOE_LSM303DLHC_INT2) |\ + PIN_MODE_INPUT(GPIOE_PIN6) | \ + PIN_MODE_INPUT(GPIOE_PIN7) | \ + PIN_MODE_INPUT(GPIOE_PIN8) | \ + PIN_MODE_INPUT(GPIOE_PIN9) | \ + PIN_MODE_INPUT(GPIOE_PIN10) | \ + PIN_MODE_INPUT(GPIOE_PIN11) | \ + PIN_MODE_INPUT(GPIOE_PIN12) | \ + PIN_MODE_INPUT(GPIOE_PIN13) | \ + PIN_MODE_INPUT(GPIOE_PIN14) | \ + PIN_MODE_INPUT(GPIOE_PIN15)) +#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_INT1) |\ + PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_INT2) |\ + PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_DRDY) |\ + PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_CS) | \ + PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_INT1) |\ + PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_INT2) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) +#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_L3GD20_INT1) | \ + PIN_OSPEED_HIGH(GPIOE_L3GD20_INT2) | \ + PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_DRDY) |\ + PIN_OSPEED_HIGH(GPIOE_L3GD20_CS) | \ + PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_INT1) |\ + PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_INT2) |\ + PIN_OSPEED_HIGH(GPIOE_PIN6) | \ + PIN_OSPEED_HIGH(GPIOE_PIN7) | \ + PIN_OSPEED_HIGH(GPIOE_PIN8) | \ + PIN_OSPEED_HIGH(GPIOE_PIN9) | \ + PIN_OSPEED_HIGH(GPIOE_PIN10) | \ + PIN_OSPEED_HIGH(GPIOE_PIN11) | \ + PIN_OSPEED_HIGH(GPIOE_PIN12) | \ + PIN_OSPEED_HIGH(GPIOE_PIN13) | \ + PIN_OSPEED_HIGH(GPIOE_PIN14) | \ + PIN_OSPEED_HIGH(GPIOE_PIN15)) +#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_L3GD20_INT1) | \ + PIN_PUPDR_PULLUP(GPIOE_L3GD20_INT2) | \ + PIN_PUPDR_FLOATING(GPIOE_LSM303DLHC_DRDY) |\ + PIN_PUPDR_PULLUP(GPIOE_L3GD20_CS) | \ + PIN_PUPDR_PULLUP(GPIOE_LSM303DLHC_INT1) |\ + PIN_PUPDR_PULLUP(GPIOE_LSM303DLHC_INT2) |\ + PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN15)) +#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_L3GD20_INT1) | \ + PIN_ODR_HIGH(GPIOE_L3GD20_INT2) | \ + PIN_ODR_HIGH(GPIOE_LSM303DLHC_DRDY) | \ + PIN_ODR_HIGH(GPIOE_L3GD20_CS) | \ + PIN_ODR_HIGH(GPIOE_LSM303DLHC_INT1) | \ + PIN_ODR_HIGH(GPIOE_LSM303DLHC_INT2) | \ + PIN_ODR_HIGH(GPIOE_PIN6) | \ + PIN_ODR_HIGH(GPIOE_PIN7) | \ + PIN_ODR_HIGH(GPIOE_PIN8) | \ + PIN_ODR_HIGH(GPIOE_PIN9) | \ + PIN_ODR_HIGH(GPIOE_PIN10) | \ + PIN_ODR_HIGH(GPIOE_PIN11) | \ + PIN_ODR_HIGH(GPIOE_PIN12) | \ + PIN_ODR_HIGH(GPIOE_PIN13) | \ + PIN_ODR_HIGH(GPIOE_PIN14) | \ + PIN_ODR_HIGH(GPIOE_PIN15)) +#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_L3GD20_INT1, 0U) | \ + PIN_AFIO_AF(GPIOE_L3GD20_INT2, 0U) | \ + PIN_AFIO_AF(GPIOE_LSM303DLHC_DRDY, 0U) |\ + PIN_AFIO_AF(GPIOE_L3GD20_CS, 0U) | \ + PIN_AFIO_AF(GPIOE_LSM303DLHC_INT1, 0U) |\ + PIN_AFIO_AF(GPIOE_LSM303DLHC_INT2, 0U) |\ + PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN7, 0U)) +#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN15, 0U)) + +/* + * GPIOF setup: + * + * PF0 - PIN0 (input pullup). + * PF1 - PIN1 (input pullup). + * PF2 - PIN2 (input pullup). + * PF3 - PIN3 (input pullup). + * PF4 - PIN4 (input pullup). + * PF5 - PIN5 (input pullup). + * PF6 - PIN6 (input pullup). + * PF7 - PIN7 (input pullup). + * PF8 - PIN8 (input pullup). + * PF9 - PIN9 (input pullup). + * PF10 - PIN10 (input pullup). + * PF11 - PIN11 (input pullup). + * PF12 - PIN12 (input pullup). + * PF13 - PIN13 (input pullup). + * PF14 - PIN14 (input pullup). + * PF15 - PIN15 (input pullup). + */ +#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | \ + PIN_MODE_INPUT(GPIOF_PIN1) | \ + PIN_MODE_INPUT(GPIOF_PIN2) | \ + PIN_MODE_INPUT(GPIOF_PIN3) | \ + PIN_MODE_INPUT(GPIOF_PIN4) | \ + PIN_MODE_INPUT(GPIOF_PIN5) | \ + PIN_MODE_INPUT(GPIOF_PIN6) | \ + PIN_MODE_INPUT(GPIOF_PIN7) | \ + PIN_MODE_INPUT(GPIOF_PIN8) | \ + PIN_MODE_INPUT(GPIOF_PIN9) | \ + PIN_MODE_INPUT(GPIOF_PIN10) | \ + PIN_MODE_INPUT(GPIOF_PIN11) | \ + PIN_MODE_INPUT(GPIOF_PIN12) | \ + PIN_MODE_INPUT(GPIOF_PIN13) | \ + PIN_MODE_INPUT(GPIOF_PIN14) | \ + PIN_MODE_INPUT(GPIOF_PIN15)) +#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) +#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_PIN0) | \ + PIN_OSPEED_HIGH(GPIOF_PIN1) | \ + PIN_OSPEED_HIGH(GPIOF_PIN2) | \ + PIN_OSPEED_HIGH(GPIOF_PIN3) | \ + PIN_OSPEED_HIGH(GPIOF_PIN4) | \ + PIN_OSPEED_HIGH(GPIOF_PIN5) | \ + PIN_OSPEED_HIGH(GPIOF_PIN6) | \ + PIN_OSPEED_HIGH(GPIOF_PIN7) | \ + PIN_OSPEED_HIGH(GPIOF_PIN8) | \ + PIN_OSPEED_HIGH(GPIOF_PIN9) | \ + PIN_OSPEED_HIGH(GPIOF_PIN10) | \ + PIN_OSPEED_HIGH(GPIOF_PIN11) | \ + PIN_OSPEED_HIGH(GPIOF_PIN12) | \ + PIN_OSPEED_HIGH(GPIOF_PIN13) | \ + PIN_OSPEED_HIGH(GPIOF_PIN14) | \ + PIN_OSPEED_HIGH(GPIOF_PIN15)) +#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN15)) +#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | \ + PIN_ODR_HIGH(GPIOF_PIN1) | \ + PIN_ODR_HIGH(GPIOF_PIN2) | \ + PIN_ODR_HIGH(GPIOF_PIN3) | \ + PIN_ODR_HIGH(GPIOF_PIN4) | \ + PIN_ODR_HIGH(GPIOF_PIN5) | \ + PIN_ODR_HIGH(GPIOF_PIN6) | \ + PIN_ODR_HIGH(GPIOF_PIN7) | \ + PIN_ODR_HIGH(GPIOF_PIN8) | \ + PIN_ODR_HIGH(GPIOF_PIN9) | \ + PIN_ODR_HIGH(GPIOF_PIN10) | \ + PIN_ODR_HIGH(GPIOF_PIN11) | \ + PIN_ODR_HIGH(GPIOF_PIN12) | \ + PIN_ODR_HIGH(GPIOF_PIN13) | \ + PIN_ODR_HIGH(GPIOF_PIN14) | \ + PIN_ODR_HIGH(GPIOF_PIN15)) +#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN7, 0U)) +#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN15, 0U)) + +/* + * GPIOG setup: + * + * PG0 - PIN0 (input pullup). + * PG1 - PIN1 (input pullup). + * PG2 - PIN2 (input pullup). + * PG3 - PIN3 (input pullup). + * PG4 - PIN4 (input pullup). + * PG5 - PIN5 (input pullup). + * PG6 - PIN6 (input pullup). + * PG7 - PIN7 (input pullup). + * PG8 - PIN8 (input pullup). + * PG9 - PIN9 (input pullup). + * PG10 - PIN10 (input pullup). + * PG11 - PIN11 (input pullup). + * PG12 - PIN12 (input pullup). + * PG13 - PIN13 (input pullup). + * PG14 - PIN14 (input pullup). + * PG15 - PIN15 (input pullup). + */ +#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \ + PIN_MODE_INPUT(GPIOG_PIN1) | \ + PIN_MODE_INPUT(GPIOG_PIN2) | \ + PIN_MODE_INPUT(GPIOG_PIN3) | \ + PIN_MODE_INPUT(GPIOG_PIN4) | \ + PIN_MODE_INPUT(GPIOG_PIN5) | \ + PIN_MODE_INPUT(GPIOG_PIN6) | \ + PIN_MODE_INPUT(GPIOG_PIN7) | \ + PIN_MODE_INPUT(GPIOG_PIN8) | \ + PIN_MODE_INPUT(GPIOG_PIN9) | \ + PIN_MODE_INPUT(GPIOG_PIN10) | \ + PIN_MODE_INPUT(GPIOG_PIN11) | \ + PIN_MODE_INPUT(GPIOG_PIN12) | \ + PIN_MODE_INPUT(GPIOG_PIN13) | \ + PIN_MODE_INPUT(GPIOG_PIN14) | \ + PIN_MODE_INPUT(GPIOG_PIN15)) +#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) +#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_HIGH(GPIOG_PIN0) | \ + PIN_OSPEED_HIGH(GPIOG_PIN1) | \ + PIN_OSPEED_HIGH(GPIOG_PIN2) | \ + PIN_OSPEED_HIGH(GPIOG_PIN3) | \ + PIN_OSPEED_HIGH(GPIOG_PIN4) | \ + PIN_OSPEED_HIGH(GPIOG_PIN5) | \ + PIN_OSPEED_HIGH(GPIOG_PIN6) | \ + PIN_OSPEED_HIGH(GPIOG_PIN7) | \ + PIN_OSPEED_HIGH(GPIOG_PIN8) | \ + PIN_OSPEED_HIGH(GPIOG_PIN9) | \ + PIN_OSPEED_HIGH(GPIOG_PIN10) | \ + PIN_OSPEED_HIGH(GPIOG_PIN11) | \ + PIN_OSPEED_HIGH(GPIOG_PIN12) | \ + PIN_OSPEED_HIGH(GPIOG_PIN13) | \ + PIN_OSPEED_HIGH(GPIOG_PIN14) | \ + PIN_OSPEED_HIGH(GPIOG_PIN15)) +#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN15)) +#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \ + PIN_ODR_HIGH(GPIOG_PIN1) | \ + PIN_ODR_HIGH(GPIOG_PIN2) | \ + PIN_ODR_HIGH(GPIOG_PIN3) | \ + PIN_ODR_HIGH(GPIOG_PIN4) | \ + PIN_ODR_HIGH(GPIOG_PIN5) | \ + PIN_ODR_HIGH(GPIOG_PIN6) | \ + PIN_ODR_HIGH(GPIOG_PIN7) | \ + PIN_ODR_HIGH(GPIOG_PIN8) | \ + PIN_ODR_HIGH(GPIOG_PIN9) | \ + PIN_ODR_HIGH(GPIOG_PIN10) | \ + PIN_ODR_HIGH(GPIOG_PIN11) | \ + PIN_ODR_HIGH(GPIOG_PIN12) | \ + PIN_ODR_HIGH(GPIOG_PIN13) | \ + PIN_ODR_HIGH(GPIOG_PIN14) | \ + PIN_ODR_HIGH(GPIOG_PIN15)) +#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN7, 0U)) +#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN15, 0U)) + +/* + * GPIOH setup: + * + * PH0 - OSC_IN (input floating). + * PH1 - OSC_OUT (input floating). + * PH2 - PIN2 (input pullup). + * PH3 - PIN3 (input pullup). + * PH4 - PIN4 (input pullup). + * PH5 - PIN5 (input pullup). + * PH6 - PIN6 (input pullup). + * PH7 - PIN7 (input pullup). + * PH8 - PIN8 (input pullup). + * PH9 - PIN9 (input pullup). + * PH10 - PIN10 (input pullup). + * PH11 - PIN11 (input pullup). + * PH12 - PIN12 (input pullup). + * PH13 - PIN13 (input pullup). + * PH14 - PIN14 (input pullup). + * PH15 - PIN15 (input pullup). + */ +#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \ + PIN_MODE_INPUT(GPIOH_OSC_OUT) | \ + PIN_MODE_INPUT(GPIOH_PIN2) | \ + PIN_MODE_INPUT(GPIOH_PIN3) | \ + PIN_MODE_INPUT(GPIOH_PIN4) | \ + PIN_MODE_INPUT(GPIOH_PIN5) | \ + PIN_MODE_INPUT(GPIOH_PIN6) | \ + PIN_MODE_INPUT(GPIOH_PIN7) | \ + PIN_MODE_INPUT(GPIOH_PIN8) | \ + PIN_MODE_INPUT(GPIOH_PIN9) | \ + PIN_MODE_INPUT(GPIOH_PIN10) | \ + PIN_MODE_INPUT(GPIOH_PIN11) | \ + PIN_MODE_INPUT(GPIOH_PIN12) | \ + PIN_MODE_INPUT(GPIOH_PIN13) | \ + PIN_MODE_INPUT(GPIOH_PIN14) | \ + PIN_MODE_INPUT(GPIOH_PIN15)) +#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | \ + PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) +#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_HIGH(GPIOH_OSC_IN) | \ + PIN_OSPEED_HIGH(GPIOH_OSC_OUT) | \ + PIN_OSPEED_HIGH(GPIOH_PIN2) | \ + PIN_OSPEED_HIGH(GPIOH_PIN3) | \ + PIN_OSPEED_HIGH(GPIOH_PIN4) | \ + PIN_OSPEED_HIGH(GPIOH_PIN5) | \ + PIN_OSPEED_HIGH(GPIOH_PIN6) | \ + PIN_OSPEED_HIGH(GPIOH_PIN7) | \ + PIN_OSPEED_HIGH(GPIOH_PIN8) | \ + PIN_OSPEED_HIGH(GPIOH_PIN9) | \ + PIN_OSPEED_HIGH(GPIOH_PIN10) | \ + PIN_OSPEED_HIGH(GPIOH_PIN11) | \ + PIN_OSPEED_HIGH(GPIOH_PIN12) | \ + PIN_OSPEED_HIGH(GPIOH_PIN13) | \ + PIN_OSPEED_HIGH(GPIOH_PIN14) | \ + PIN_OSPEED_HIGH(GPIOH_PIN15)) +#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | \ + PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN15)) +#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | \ + PIN_ODR_HIGH(GPIOH_OSC_OUT) | \ + PIN_ODR_HIGH(GPIOH_PIN2) | \ + PIN_ODR_HIGH(GPIOH_PIN3) | \ + PIN_ODR_HIGH(GPIOH_PIN4) | \ + PIN_ODR_HIGH(GPIOH_PIN5) | \ + PIN_ODR_HIGH(GPIOH_PIN6) | \ + PIN_ODR_HIGH(GPIOH_PIN7) | \ + PIN_ODR_HIGH(GPIOH_PIN8) | \ + PIN_ODR_HIGH(GPIOH_PIN9) | \ + PIN_ODR_HIGH(GPIOH_PIN10) | \ + PIN_ODR_HIGH(GPIOH_PIN11) | \ + PIN_ODR_HIGH(GPIOH_PIN12) | \ + PIN_ODR_HIGH(GPIOH_PIN13) | \ + PIN_ODR_HIGH(GPIOH_PIN14) | \ + PIN_ODR_HIGH(GPIOH_PIN15)) +#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0U) | \ + PIN_AFIO_AF(GPIOH_OSC_OUT, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN7, 0U)) +#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN15, 0U)) + +/* + * GPIOI setup: + * + * PI0 - PIN0 (input pullup). + * PI1 - PIN1 (input pullup). + * PI2 - PIN2 (input pullup). + * PI3 - PIN3 (input pullup). + * PI4 - PIN4 (input pullup). + * PI5 - PIN5 (input pullup). + * PI6 - PIN6 (input pullup). + * PI7 - PIN7 (input pullup). + * PI8 - PIN8 (input pullup). + * PI9 - PIN9 (input pullup). + * PI10 - PIN10 (input pullup). + * PI11 - PIN11 (input pullup). + * PI12 - PIN12 (input pullup). + * PI13 - PIN13 (input pullup). + * PI14 - PIN14 (input pullup). + * PI15 - PIN15 (input pullup). + */ +#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | \ + PIN_MODE_INPUT(GPIOI_PIN1) | \ + PIN_MODE_INPUT(GPIOI_PIN2) | \ + PIN_MODE_INPUT(GPIOI_PIN3) | \ + PIN_MODE_INPUT(GPIOI_PIN4) | \ + PIN_MODE_INPUT(GPIOI_PIN5) | \ + PIN_MODE_INPUT(GPIOI_PIN6) | \ + PIN_MODE_INPUT(GPIOI_PIN7) | \ + PIN_MODE_INPUT(GPIOI_PIN8) | \ + PIN_MODE_INPUT(GPIOI_PIN9) | \ + PIN_MODE_INPUT(GPIOI_PIN10) | \ + PIN_MODE_INPUT(GPIOI_PIN11) | \ + PIN_MODE_INPUT(GPIOI_PIN12) | \ + PIN_MODE_INPUT(GPIOI_PIN13) | \ + PIN_MODE_INPUT(GPIOI_PIN14) | \ + PIN_MODE_INPUT(GPIOI_PIN15)) +#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN15)) +#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_HIGH(GPIOI_PIN0) | \ + PIN_OSPEED_HIGH(GPIOI_PIN1) | \ + PIN_OSPEED_HIGH(GPIOI_PIN2) | \ + PIN_OSPEED_HIGH(GPIOI_PIN3) | \ + PIN_OSPEED_HIGH(GPIOI_PIN4) | \ + PIN_OSPEED_HIGH(GPIOI_PIN5) | \ + PIN_OSPEED_HIGH(GPIOI_PIN6) | \ + PIN_OSPEED_HIGH(GPIOI_PIN7) | \ + PIN_OSPEED_HIGH(GPIOI_PIN8) | \ + PIN_OSPEED_HIGH(GPIOI_PIN9) | \ + PIN_OSPEED_HIGH(GPIOI_PIN10) | \ + PIN_OSPEED_HIGH(GPIOI_PIN11) | \ + PIN_OSPEED_HIGH(GPIOI_PIN12) | \ + PIN_OSPEED_HIGH(GPIOI_PIN13) | \ + PIN_OSPEED_HIGH(GPIOI_PIN14) | \ + PIN_OSPEED_HIGH(GPIOI_PIN15)) +#define VAL_GPIOI_PUPDR (PIN_PUPDR_PULLUP(GPIOI_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN15)) +#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | \ + PIN_ODR_HIGH(GPIOI_PIN1) | \ + PIN_ODR_HIGH(GPIOI_PIN2) | \ + PIN_ODR_HIGH(GPIOI_PIN3) | \ + PIN_ODR_HIGH(GPIOI_PIN4) | \ + PIN_ODR_HIGH(GPIOI_PIN5) | \ + PIN_ODR_HIGH(GPIOI_PIN6) | \ + PIN_ODR_HIGH(GPIOI_PIN7) | \ + PIN_ODR_HIGH(GPIOI_PIN8) | \ + PIN_ODR_HIGH(GPIOI_PIN9) | \ + PIN_ODR_HIGH(GPIOI_PIN10) | \ + PIN_ODR_HIGH(GPIOI_PIN11) | \ + PIN_ODR_HIGH(GPIOI_PIN12) | \ + PIN_ODR_HIGH(GPIOI_PIN13) | \ + PIN_ODR_HIGH(GPIOI_PIN14) | \ + PIN_ODR_HIGH(GPIOI_PIN15)) +#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN7, 0U)) +#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN15, 0U)) + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* BOARD_H */ diff --git a/drivers/boards/BLACKPILL_STM32_F401/board.mk b/drivers/boards/BLACKPILL_STM32_F401/board.mk new file mode 100644 index 000000000..33473ed6b --- /dev/null +++ b/drivers/boards/BLACKPILL_STM32_F401/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/boards/BLACKPILL_STM32_F401/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/boards/BLACKPILL_STM32_F401 + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/drivers/boards/BLACKPILL_STM32_F401/cfg/board.chcfg b/drivers/boards/BLACKPILL_STM32_F401/cfg/board.chcfg new file mode 100644 index 000000000..7559ceb93 --- /dev/null +++ b/drivers/boards/BLACKPILL_STM32_F401/cfg/board.chcfg @@ -0,0 +1,1193 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- STM32F4xx board Template --> +<board + xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" + xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f4xx_board.xsd"> + <configuration_settings> + <templates_path>resources/gencfg/processors/boards/stm32f4xx/templates</templates_path> + <output_path>..</output_path> + <hal_version>5.0.x</hal_version> + </configuration_settings> + <board_name>STMicroelectronics STM32F401C-Discovery</board_name> + <board_id>ST_STM32F401C_DISCOVERY</board_id> + <board_functions></board_functions> + <subtype>STM32F401xC</subtype> + <clocks + HSEFrequency="8000000" + HSEBypass="false" + LSEFrequency="0" + LSEBypass="false" + VDD="300" /> + <ports> + <GPIOA> + <pin0 + ID="BUTTON" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Input" + Alternate="0" /> + <pin1 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin2 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin3 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin4 + ID="CS43L22_LRCK" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Alternate" + Alternate="6" /> + <pin5 + ID="L3GD20_SCL" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Alternate" + Alternate="5" /> + <pin6 + ID="L3GD20_SD0" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Alternate" + Alternate="5" /> + <pin7 + ID="L3GD20_SDI" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Alternate" + Alternate="5" /> + <pin8 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin9 + ID="VBUS_FS" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Input" + Alternate="0" /> + <pin10 + ID="OTG_FS_ID" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Alternate" + Alternate="10" /> + <pin11 + ID="OTG_FS_DM" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Alternate" + Alternate="10" /> + <pin12 + ID="OTG_FS_DP" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Alternate" + Alternate="10" /> + <pin13 + ID="SWDIO" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Alternate" + Alternate="0" /> + <pin14 + ID="SWCLK" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Alternate" + Alternate="0" /> + <pin15 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + </GPIOA> + <GPIOB> + <pin0 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin1 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin2 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin3 + ID="SWO" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Alternate" + Alternate="0" /> + <pin4 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin5 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin6 + ID="LSM303DLHC_SCL" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Alternate" + Alternate="4" /> + <pin7 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin8 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin9 + ID="LSM303DLHC_SDA" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Alternate" + Alternate="4" /> + <pin10 + ID="MP45DT02_CLK_IN" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Alternate" + Alternate="5" /> + <pin11 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin12 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin13 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin14 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin15 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + </GPIOB> + <GPIOC> + <pin0 + ID="OTG_FS_POWER_ON" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Output" + Alternate="0" /> + <pin1 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin2 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin3 + ID="CS43L22_AIN4x MP45DT02_PDM_OUT" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Alternate" + Alternate="5" /> + <pin4 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin5 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin6 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin7 + ID="CS43L22_MCLK" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Alternate" + Alternate="6" /> + <pin8 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin9 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin10 + ID="CS43L22_SCLK" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Alternate" + Alternate="6" /> + <pin11 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin12 + ID="CS43L22_SDIN" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Alternate" + Alternate="6" /> + <pin13 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin14 + ID="OSC32_IN" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Input" + Alternate="0" /> + <pin15 + ID="OSC32_OUT" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Input" + Alternate="0" /> + </GPIOC> + <GPIOD> + <pin0 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin1 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin2 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin3 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin4 + ID="CS43L22_RESET" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Output" + Alternate="0" /> + <pin5 + ID="OverCurrent" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Input" + Alternate="0" /> + <pin6 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin7 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin8 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin9 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin10 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin11 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin12 + ID="LED4" + Type="PushPull" + Level="Low" + Speed="Maximum" + Resistor="Floating" + Mode="Output" + Alternate="0" /> + <pin13 + ID="LED3" + Type="PushPull" + Level="Low" + Speed="Maximum" + Resistor="Floating" + Mode="Output" + Alternate="0" /> + <pin14 + ID="LED5" + Type="PushPull" + Level="Low" + Speed="Maximum" + Resistor="Floating" + Mode="Output" + Alternate="0" /> + <pin15 + ID="LED6" + Type="PushPull" + Level="Low" + Speed="Maximum" + Resistor="Floating" + Mode="Output" + Alternate="0" /> + </GPIOD> + <GPIOE> + <pin0 + ID="L3GD20_INT1" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin1 + ID="L3GD20_INT2" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin2 + ID="LSM303DLHC_DRDY" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Input" + Alternate="0" /> + <pin3 + ID="L3GD20_CS" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Output" + Alternate="0" /> + <pin4 + ID="LSM303DLHC_INT1" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Output" + Alternate="0" /> + <pin5 + ID="LSM303DLHC_INT2" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Output" + Alternate="0" /> + <pin6 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin7 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin8 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin9 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin10 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin11 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin12 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin13 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin14 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin15 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + </GPIOE> + <GPIOF> + <pin0 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin1 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin2 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin3 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin4 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin5 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin6 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin7 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin8 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin9 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin10 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin11 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin12 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin13 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin14 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin15 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + </GPIOF> + <GPIOG> + <pin0 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin1 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin2 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin3 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin4 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin5 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin6 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin7 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin8 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin9 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin10 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin11 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin12 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin13 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin14 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin15 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + </GPIOG> + <GPIOH> + <pin0 + ID="OSC_IN" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Input" + Alternate="0" /> + <pin1 + ID="OSC_OUT" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="Floating" + Mode="Input" + Alternate="0" /> + <pin2 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin3 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin4 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin5 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin6 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin7 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin8 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin9 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin10 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin11 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin12 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin13 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin14 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin15 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + </GPIOH> + <GPIOI> + <pin0 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin1 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin2 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin3 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin4 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin5 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin6 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin7 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin8 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin9 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin10 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin11 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin12 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin13 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin14 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + <pin15 + ID="" + Type="PushPull" + Level="High" + Speed="Maximum" + Resistor="PullUp" + Mode="Input" + Alternate="0" /> + </GPIOI> + </ports> +</board> diff --git a/drivers/boards/BLACKPILL_STM32_F401/cfg/board.fmpp b/drivers/boards/BLACKPILL_STM32_F401/cfg/board.fmpp new file mode 100644 index 000000000..41754c141 --- /dev/null +++ b/drivers/boards/BLACKPILL_STM32_F401/cfg/board.fmpp @@ -0,0 +1,15 @@ +sourceRoot: ../../../../../tools/ftl/processors/boards/stm32f4xx/templates +outputRoot: .. +dataRoot: . + +freemarkerLinks: { + lib: ../../../../../tools/ftl/libs +} + +data : { + doc1:xml ( + board.chcfg + { + } + ) +} |