diff options
| -rw-r--r-- | keyboards/just60/config.h | 54 | ||||
| -rw-r--r-- | keyboards/just60/just60.h | 41 | ||||
| -rw-r--r-- | keyboards/just60/keymaps/default/keymap.c | 50 | ||||
| -rw-r--r-- | keyboards/just60/keymaps/default/readme.md | 19 | ||||
| -rw-r--r-- | keyboards/just60/readme.md | 17 | ||||
| -rw-r--r-- | keyboards/just60/rules.mk | 35 |
6 files changed, 216 insertions, 0 deletions
diff --git a/keyboards/just60/config.h b/keyboards/just60/config.h new file mode 100644 index 000000000..ef0af7c61 --- /dev/null +++ b/keyboards/just60/config.h @@ -0,0 +1,54 @@ +/* +Copyright 2019 Jianfei Wang + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1960 +#define DEVICE_VER 0x0001 +#define MANUFACTURER YDKB +#define PRODUCT Just60 +#define DESCRIPTION Just60 Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +#define MATRIX_ROW_PINS { E2, C7, B3, B2, B1 } +#define MATRIX_COL_PINS { D6, D7, B4, B6, B5, B7, F7, F6, F5, F4, F1, F0, E6, B0 } +#define UNUSED_PINS +#define DIODE_DIRECTION COL2ROW + +#define QMK_ESC_OUTPUT D6 // usually COL +#define QMK_ESC_INPUT E2 // usually ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* disable these deprecated features by default */ +#ifndef LINK_TIME_OPTIMIZATION_ENABLE + #define NO_ACTION_MACRO + #define NO_ACTION_FUNCTION +#endif diff --git a/keyboards/just60/just60.h b/keyboards/just60/just60.h new file mode 100644 index 000000000..426324fe0 --- /dev/null +++ b/keyboards/just60/just60.h @@ -0,0 +1,41 @@ +/* Copyright 2019 Jianfei Wang + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K48 , \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D , \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D , \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, \ + K40, K41, K42, K44, K45, K47, K49, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, KC_NO, K3C, KC_NO }, \ + { K40, K41, K42, KC_NO, K44, K45, KC_NO, K47, K48, K49, K4A, K4B, K4C, K4D }, \ +} diff --git a/keyboards/just60/keymaps/default/keymap.c b/keyboards/just60/keymaps/default/keymap.c new file mode 100644 index 000000000..da034e0e4 --- /dev/null +++ b/keyboards/just60/keymaps/default/keymap.c @@ -0,0 +1,50 @@ +/* Copyright 2019 Jianfei Wang + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN, + _COMMAND +}; + +#define FN_SPC LT(_FN, KC_SPC) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + MO(_FN), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LALT, KC_LGUI, FN_SPC, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + [_FN] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + KC_CAPS, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, _______, _______, _______, _______, _______, KC_INS, KC_DEL, _______, + _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, MO(_COMMAND), + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END + ), + [_COMMAND] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/just60/keymaps/default/readme.md b/keyboards/just60/keymaps/default/readme.md new file mode 100644 index 000000000..927618c91 --- /dev/null +++ b/keyboards/just60/keymaps/default/readme.md @@ -0,0 +1,19 @@ +# The default keymap for Just60 + +Just60 could be customized to many layouts, and this is just one of them. + +This layout is an ANSI layout with a Minila spacebar row. + +``` + +-------------------------------------------------------------------------+ + | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BACKSP | + +-------------------------------------------------------------------------+ + | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | + +-------------------------------------------------------------------------+ + | FN | A | S | D | F | G | H | J | K | L | ; | ' | RETURN | + +-------------------------------------------------------------------------+ + | LSHIFT | Z | X | C | V | B | N | M | , | . | / | RSHIFT | + +-------------------------------------------------------------------------+ + | LCMD | LALT | LGUI | FN | SPACE | RGUI | RALT | LEFT | DOWN | UP | RGHT | + +-------------------------------------------------------------------------+ +``` diff --git a/keyboards/just60/readme.md b/keyboards/just60/readme.md new file mode 100644 index 000000000..f78adcd52 --- /dev/null +++ b/keyboards/just60/readme.md @@ -0,0 +1,17 @@ +# Just60 + +Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io. + +To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `RESET`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`. + +Backlight LEDs and Bluetooth are not working yet. + +* Keyboard Maintainer: [Jianfei Wang](https://github.com/thinxer) +* Hardware Supported: Just60 (atmega32u4) +* Hardware Availability: https://item.taobao.com/item.htm?id=564176654249 + +Make example for this keyboard (after setting up your build environment): + + make just60:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/just60/rules.mk b/keyboards/just60/rules.mk new file mode 100644 index 000000000..3aaf10154 --- /dev/null +++ b/keyboards/just60/rules.mk @@ -0,0 +1,35 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency +F_CPU = 8000000 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = lufa-ms + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs |