Remove custom backlight code for PS2AVRGB boards (#7775)

* Remove custom backlight code for PS2AVRGB boards

* Remove custom driver setting

* BACKLIGHT_BREATHING goes in config.h, not here

* Don't need to include backlight.c again here either

* Turn on backlight for Canoe

* Disable console on a few boards due to oversize

101 files changed, 474 insertions, 2802 deletions

diff --git a/keyboards/ares/ares.c b/keyboards/ares/ares.c
index 07276491c..e6379cb18 100644
--- a/keyboards/ares/ares.c
+++ b/keyboards/ares/ares.c
@@ -17,27 +17,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "ares.h"
 
-#ifdef BACKLIGHT_ENABLE
-void backlight_init_ports(void) {
-	setPinOutput(D0);
-	setPinOutput(D1);
-	setPinOutput(D4);
-	setPinOutput(D6);
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
 }
 
-void backlight_set(uint8_t level) {
-	if (level == 0) {
-		// Turn out the lights
-		writePinLow(D0);
-		writePinLow(D1);
-		writePinLow(D4);
-		writePinLow(D6);
-	} else {
-		// Turn on the lights
-		writePinHigh(D0);
-		writePinHigh(D1);
-		writePinHigh(D4);
-		writePinHigh(D6);
-	}
+void led_init_ports(void) {
+    setPinOutput(D1);
+    writePinHigh(D1);
+}
+
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
+    }
+    return true;
 }
-#endif
diff --git a/keyboards/ares/config.h b/keyboards/ares/config.h
index f0aa926ea..c50587db9 100644
--- a/keyboards/ares/config.h
+++ b/keyboards/ares/config.h
@@ -37,7 +37,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1
diff --git a/keyboards/ares/rules.mk b/keyboards/ares/rules.mk
index 58d36bc67..f54074172 100644
--- a/keyboards/ares/rules.mk
+++ b/keyboards/ares/rules.mk
@@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = no
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = no
+BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = no
 WS2812_DRIVER = i2c
 
diff --git a/keyboards/bfake/bfake.c b/keyboards/bfake/bfake.c
index 9039fe546..eb328ba83 100644
--- a/keyboards/bfake/bfake.c
+++ b/keyboards/bfake/bfake.c
@@ -17,30 +17,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "bfake.h"
 
-void backlight_init_ports(void) {
-	setPinOutput(D0);
-	setPinOutput(D1);
-	setPinOutput(D4);
-	setPinOutput(D6);
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
 
-	writePinLow(D0);
-	writePinLow(D1);
-	writePinLow(D4);
-	writePinLow(D6);
+void led_init_ports(void) {
+    setPinOutput(D1);
+    writePinHigh(D1);
 }
 
-void backlight_set(uint8_t level) {
-	if (level == 0) {
-		// Turn out the lights
-		writePinLow(D0);
-		writePinLow(D1);
-		writePinLow(D4);
-		writePinLow(D6);
-	} else {
-		// Turn on the lights
-		writePinHigh(D0);
-		writePinHigh(D1);
-		writePinHigh(D4);
-		writePinHigh(D6);
-	}
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
+    }
+    return true;
 }
diff --git a/keyboards/bfake/config.h b/keyboards/bfake/config.h
index 65f1f3a75..7c814ccc9 100644
--- a/keyboards/bfake/config.h
+++ b/keyboards/bfake/config.h
@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef BFAKE_CONFIG_H
-#define BFAKE_CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -38,9 +37,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1
-
-#endif
diff --git a/keyboards/bfake/rules.mk b/keyboards/bfake/rules.mk
index 107bb4fa9..ab6af983c 100644
--- a/keyboards/bfake/rules.mk
+++ b/keyboards/bfake/rules.mk
@@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = yes
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = no
+BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = no
 WS2812_DRIVER = i2c
 
diff --git a/keyboards/donutcables/budget96/budget96.c b/keyboards/donutcables/budget96/budget96.c
index e9125a3e6..7317e24e2 100644
--- a/keyboards/donutcables/budget96/budget96.c
+++ b/keyboards/donutcables/budget96/budget96.c
@@ -16,32 +16,22 @@
 
 #include "budget96.h"
 
-void backlight_init_ports(void) {
-    // initialize pins D0, D1, D4 and D6 as output
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
     setPinOutput(D0);
     setPinOutput(D1);
-    setPinOutput(D4);
-    setPinOutput(D6);
-
-    // turn backlight LEDs on
     writePinHigh(D0);
     writePinHigh(D1);
-    writePinHigh(D4);
-    writePinHigh(D6);
 }
 
-void backlight_set(uint8_t level) {
-    if (level == 0) {
-        // turn backlight LEDs off
-        writePinLow(D0);
-        writePinLow(D1);
-        writePinLow(D4);
-        writePinLow(D6);
-    } else {
-        // turn backlight LEDs on
-        writePinHigh(D0);
-        writePinHigh(D1);
-        writePinHigh(D4);
-        writePinHigh(D6);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D0, !led_state.num_lock);
+        writePin(D1, !led_state.caps_lock);
     }
+    return true;
 }
diff --git a/keyboards/donutcables/budget96/config.h b/keyboards/donutcables/budget96/config.h
index 127e542f1..dddc8075b 100644
--- a/keyboards/donutcables/budget96/config.h
+++ b/keyboards/donutcables/budget96/config.h
@@ -37,5 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
 #define RGBLIGHT_ANIMATIONS
diff --git a/keyboards/donutcables/budget96/rules.mk b/keyboards/donutcables/budget96/rules.mk
index 54328d248..84eace5ed 100644
--- a/keyboards/donutcables/budget96/rules.mk
+++ b/keyboards/donutcables/budget96/rules.mk
@@ -15,7 +15,7 @@ BOOTLOADER = bootloadHID
 BOOTMAGIC_ENABLE = no
 MOUSEKEY_ENABLE = yes
 EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = yes
+CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
diff --git a/keyboards/eve/meteor/config.h b/keyboards/eve/meteor/config.h
index b23bc877f..2100c3a45 100644
--- a/keyboards/eve/meteor/config.h
+++ b/keyboards/eve/meteor/config.h
@@ -36,4 +36,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
diff --git a/keyboards/eve/meteor/meteor.c b/keyboards/eve/meteor/meteor.c
index f5ecbad02..ac1ca5d64 100644
--- a/keyboards/eve/meteor/meteor.c
+++ b/keyboards/eve/meteor/meteor.c
@@ -16,32 +16,19 @@
 
 #include "meteor.h"
 
-void backlight_init_ports(void) {
-    // initialize pins D0, D1, D4 and D6 as output
-    setPinOutput(D0);
-    setPinOutput(D1);
-    setPinOutput(D4);
-    setPinOutput(D6);
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
 
-    // turn backlight LEDs on
-    writePinHigh(D0);
+void led_init_ports(void) {
+    setPinOutput(D1);
     writePinHigh(D1);
-    writePinHigh(D4);
-    writePinHigh(D6);
 }
 
-void backlight_set(uint8_t level) {
-    if (level == 0) {
-        // turn backlight LEDs off
-        writePinLow(D0);
-        writePinLow(D1);
-        writePinLow(D4);
-        writePinLow(D6);
-    } else {
-        // turn backlight LEDs on
-        writePinHigh(D0);
-        writePinHigh(D1);
-        writePinHigh(D4);
-        writePinHigh(D6);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
     }
+    return true;
 }
diff --git a/keyboards/exclusive/e6v2/le_bmc/config.h b/keyboards/exclusive/e6v2/le_bmc/config.h
index d0b976c1e..ca680f502 100644
--- a/keyboards/exclusive/e6v2/le_bmc/config.h
+++ b/keyboards/exclusive/e6v2/le_bmc/config.h
@@ -45,5 +45,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, C2, C3, C4, C5, D7 }
 #define DIODE_DIRECTION COL2ROW
 
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
+
 #define RGBLED_NUM 6
 #define RGBLIGHT_ANIMATIONS
diff --git a/keyboards/exclusive/e6v2/le_bmc/le_bmc.c b/keyboards/exclusive/e6v2/le_bmc/le_bmc.c
index e3b81c81b..b09e58879 100644
--- a/keyboards/exclusive/e6v2/le_bmc/le_bmc.c
+++ b/keyboards/exclusive/e6v2/le_bmc/le_bmc.c
@@ -16,32 +16,19 @@
 
 #include "le_bmc.h"
 
-void backlight_init_ports(void) {
-    // initialize pins D0, D1, D4 and D6 as output
-    setPinOutput(D0);
-    setPinOutput(D1);
-    setPinOutput(D4);
-    setPinOutput(D6);
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
 
-    // turn backlight LEDs on
-    writePinHigh(D0);
+void led_init_ports(void) {
+    setPinOutput(D1);
     writePinHigh(D1);
-    writePinHigh(D4);
-    writePinHigh(D6);
 }
 
-void backlight_set(uint8_t level) {
-    if (level == 0) {
-        // turn backlight LEDs off
-        writePinLow(D0);
-        writePinLow(D1);
-        writePinLow(D4);
-        writePinLow(D6);
-    } else {
-        // turn backlight LEDs on
-        writePinHigh(D0);
-        writePinHigh(D1);
-        writePinHigh(D4);
-        writePinHigh(D6);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
     }
+    return true;
 }
diff --git a/keyboards/exclusive/e6v2/le_bmc/rules.mk b/keyboards/exclusive/e6v2/le_bmc/rules.mk
index 106044ba7..ded651d3d 100644
--- a/keyboards/exclusive/e6v2/le_bmc/rules.mk
+++ b/keyboards/exclusive/e6v2/le_bmc/rules.mk
@@ -17,13 +17,13 @@ BOOTLOADER = bootloadHID
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+CONSOLE_ENABLE = no         # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 WS2812_DRIVER = i2c
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
diff --git a/keyboards/exclusive/e6v2/oe_bmc/config.h b/keyboards/exclusive/e6v2/oe_bmc/config.h
index fc7c91ca6..a6b56ba00 100644
--- a/keyboards/exclusive/e6v2/oe_bmc/config.h
+++ b/keyboards/exclusive/e6v2/oe_bmc/config.h
@@ -45,5 +45,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, C2, C3, C4, C5, D7 }
 #define DIODE_DIRECTION COL2ROW
 
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
+
 #define RGBLED_NUM 6
 #define RGBLIGHT_ANIMATIONS
diff --git a/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c b/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c
index 97d354653..a0a6c579b 100644
--- a/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c
+++ b/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c
@@ -16,32 +16,19 @@
 
 #include "oe_bmc.h"
 
-void backlight_init_ports(void) {
-    // initialize pins D0, D1, D4 and D6 as output
-    setPinOutput(D0);
-    setPinOutput(D1);
-    setPinOutput(D4);
-    setPinOutput(D6);
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
 
-    // turn backlight LEDs on
-    writePinHigh(D0);
+void led_init_ports(void) {
+    setPinOutput(D1);
     writePinHigh(D1);
-    writePinHigh(D4);
-    writePinHigh(D6);
 }
 
-void backlight_set(uint8_t level) {
-    if (level == 0) {
-        // turn backlight LEDs off
-        writePinLow(D0);
-        writePinLow(D1);
-        writePinLow(D4);
-        writePinLow(D6);
-    } else {
-        // turn backlight LEDs on
-        writePinHigh(D0);
-        writePinHigh(D1);
-        writePinHigh(D4);
-        writePinHigh(D6);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
     }
+    return true;
 }
diff --git a/keyboards/exclusive/e6v2/oe_bmc/rules.mk b/keyboards/exclusive/e6v2/oe_bmc/rules.mk
index 106044ba7..ded651d3d 100644
--- a/keyboards/exclusive/e6v2/oe_bmc/rules.mk
+++ b/keyboards/exclusive/e6v2/oe_bmc/rules.mk
@@ -17,13 +17,13 @@ BOOTLOADER = bootloadHID
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+CONSOLE_ENABLE = no         # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 WS2812_DRIVER = i2c
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
diff --git a/keyboards/exent/config.h b/keyboards/exent/config.h
index 08d241f65..4921746c1 100644
--- a/keyboards/exent/config.h
+++ b/keyboards/exent/config.h
@@ -39,7 +39,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1
diff --git a/keyboards/exent/exent.c b/keyboards/exent/exent.c
index 82066f7e8..c6870f2c7 100644
--- a/keyboards/exent/exent.c
+++ b/keyboards/exent/exent.c
@@ -15,3 +15,26 @@
  */
 
 #include "exent.h"
+
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
+    setPinOutput(D0);
+    setPinOutput(D1);
+    setPinOutput(D6);
+    writePinHigh(D0);
+    writePinHigh(D1);
+    writePinHigh(D6);
+}
+
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D0, !led_state.num_lock);
+        writePin(D1, !led_state.caps_lock);
+        writePin(D6, !led_state.scroll_lock);
+    }
+    return true;
+}
diff --git a/keyboards/exent/rules.mk b/keyboards/exent/rules.mk
index 10442b31b..0ea425ac7 100644
--- a/keyboards/exent/rules.mk
+++ b/keyboards/exent/rules.mk
@@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = no
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = no
+BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = i2c
 
diff --git a/keyboards/facew/config.h b/keyboards/facew/config.h
index 9a31f9278..0dc35e625 100644
--- a/keyboards/facew/config.h
+++ b/keyboards/facew/config.h
@@ -37,5 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
 #define RGBLIGHT_ANIMATIONS
diff --git a/keyboards/facew/facew.c b/keyboards/facew/facew.c
index fa58f0cf7..fc176466f 100644
--- a/keyboards/facew/facew.c
+++ b/keyboards/facew/facew.c
@@ -17,30 +17,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "facew.h"
 
-void backlight_init_ports(void) {
-	setPinOutput(D0);
-	setPinOutput(D1);
-	setPinOutput(D4);
-	setPinOutput(D6);
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
 
-	writePinLow(D0);
-	writePinLow(D1);
-	writePinLow(D4);
-	writePinLow(D6);
+void led_init_ports(void) {
+    setPinOutput(D0);
+    setPinOutput(D1);
+    writePinHigh(D0);
+    writePinHigh(D1);
 }
 
-void backlight_set(uint8_t level) {
-	if (level == 0) {
-		// Turn out the lights
-		writePinLow(D0);
-		writePinLow(D1);
-		writePinLow(D4);
-		writePinLow(D6);
-	} else {
-		// Turn on the lights
-		writePinHigh(D0);
-		writePinHigh(D1);
-		writePinHigh(D4);
-		writePinHigh(D6);
-	}
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
+    }
+    return true;
 }
diff --git a/keyboards/facew/rules.mk b/keyboards/facew/rules.mk
index c4117d15d..81cfb758c 100644
--- a/keyboards/facew/rules.mk
+++ b/keyboards/facew/rules.mk
@@ -15,7 +15,7 @@ BOOTLOADER = bootloadHID
 BOOTMAGIC_ENABLE = no
 MOUSEKEY_ENABLE = yes
 EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = yes
+CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
diff --git a/keyboards/ft/mars80/config.h b/keyboards/ft/mars80/config.h
index 1bf939287..38c3e851a 100644
--- a/keyboards/ft/mars80/config.h
+++ b/keyboards/ft/mars80/config.h
@@ -38,7 +38,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1
diff --git a/keyboards/ft/mars80/mars80.c b/keyboards/ft/mars80/mars80.c
index 8e5127408..ca1950353 100644
--- a/keyboards/ft/mars80/mars80.c
+++ b/keyboards/ft/mars80/mars80.c
@@ -16,32 +16,22 @@
 
 #include "mars80.h"
 
-void backlight_init_ports(void) {
-    // initialize pins D0, D1, D4 and D6 as output
-    setPinOutput(D0);
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
     setPinOutput(D1);
-    setPinOutput(D4);
     setPinOutput(D6);
-
-    // turn backlight LEDs on
-    writePinHigh(D0);
     writePinHigh(D1);
-    writePinHigh(D4);
     writePinHigh(D6);
 }
 
-void backlight_set(uint8_t level) {
-    if (level == 0) {
-        // turn backlight LEDs off
-        writePinLow(D0);
-        writePinLow(D1);
-        writePinLow(D4);
-        writePinLow(D6);
-    } else {
-        // turn backlight LEDs on
-        writePinHigh(D0);
-        writePinHigh(D1);
-        writePinHigh(D4);
-        writePinHigh(D6);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
+        writePin(D6, !led_state.scroll_lock);
     }
+    return true;
 }
diff --git a/keyboards/gray_studio/hb85/hb85.c b/keyboards/gray_studio/hb85/hb85.c
index 21562b9e0..57f5e6031 100644
--- a/keyboards/gray_studio/hb85/hb85.c
+++ b/keyboards/gray_studio/hb85/hb85.c
@@ -18,32 +18,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "hb85.h"
 
-void backlight_init_ports(void) {
-    // initialize pins D0, D1, D4 and D6 as output
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
     setPinOutput(D0);
     setPinOutput(D1);
-    setPinOutput(D4);
     setPinOutput(D6);
-
-    // turn backlight LEDs on
     writePinHigh(D0);
     writePinHigh(D1);
-    writePinHigh(D4);
     writePinHigh(D6);
 }
 
-void backlight_set(uint8_t level) {
-    if (level == 0) {
-        // turn backlight LEDs off
-        writePinLow(D0);
-        writePinLow(D1);
-        writePinLow(D4);
-        writePinLow(D6);
-    } else {
-        // turn backlight LEDs on
-        writePinHigh(D0);
-        writePinHigh(D1);
-        writePinHigh(D4);
-        writePinHigh(D6);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D0, !led_state.num_lock);
+        writePin(D1, !led_state.caps_lock);
+        writePin(D6, !led_state.scroll_lock);
     }
+    return true;
 }
diff --git a/keyboards/gray_studio/hb85/rules.mk b/keyboards/gray_studio/hb85/rules.mk
index ec57b03dc..79b783e42 100644
--- a/keyboards/gray_studio/hb85/rules.mk
+++ b/keyboards/gray_studio/hb85/rules.mk
@@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = no
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = no
+BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = i2c
 
diff --git a/keyboards/jc65/v32a/config.h b/keyboards/jc65/v32a/config.h
index 5439dbe39..392aebc2a 100644
--- a/keyboards/jc65/v32a/config.h
+++ b/keyboards/jc65/v32a/config.h
@@ -32,7 +32,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
 #define DIODE_DIRECTION COL2ROW
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
+
 #define RGBLED_NUM 16
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 8
diff --git a/keyboards/jc65/v32a/v32a.c b/keyboards/jc65/v32a/v32a.c
index 2a289872f..627661a57 100644
--- a/keyboards/jc65/v32a/v32a.c
+++ b/keyboards/jc65/v32a/v32a.c
@@ -17,32 +17,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "v32a.h"
 
-#ifdef BACKLIGHT_ENABLE
-void backlight_init_ports(void) {
-	setPinOutput(D0);
-	setPinOutput(D1);
-	setPinOutput(D4);
-	setPinOutput(D6);
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
 
-	writePinLow(D0);
-	writePinLow(D1);
-	writePinLow(D4);
-	writePinLow(D6);
+void led_init_ports(void) {
+    setPinOutput(D1);
+    writePinHigh(D1);
 }
 
-void backlight_set(uint8_t level) {
-	if (level == 0) {
-		// Turn out the lights
-		writePinLow(D0);
-		writePinLow(D1);
-		writePinLow(D4);
-		writePinLow(D6);
-	} else {
-		// Turn on the lights
-		writePinHigh(D0);
-		writePinHigh(D1);
-		writePinHigh(D4);
-		writePinHigh(D6);
-	}
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
+    }
+    return true;
 }
-#endif
diff --git a/keyboards/jj40/config.h b/keyboards/jj40/config.h
index 2310ce87e..90bcacfd1 100644
--- a/keyboards/jj40/config.h
+++ b/keyboards/jj40/config.h
@@ -35,7 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 12
-// #define BACKLIGHT_BREATHING  // Requires #4324 to enable hardware pwm for atmega32a
+#define BACKLIGHT_BREATHING
 
 /* RGB underglow */
 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0.
diff --git a/keyboards/jj4x4/config.h b/keyboards/jj4x4/config.h
index 8918e60da..b3f33d6e7 100644
--- a/keyboards/jj4x4/config.h
+++ b/keyboards/jj4x4/config.h
@@ -38,7 +38,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 12
-// #define BACKLIGHT_BREATHING  // Requires #4324 to enable hardware pwm for atmega32a
+#define BACKLIGHT_BREATHING
 
 /* RGB underglow */
 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0.
diff --git a/keyboards/jj50/backlight.c b/keyboards/jj50/backlight.c
deleted file mode 100644
index fbd241fa9..000000000
--- a/keyboards/jj50/backlight.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#include "backlight.h"
-#include "quantum.h"
-
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-
-#include "backlight_custom.h"
-#include "breathing_custom.h"
-
-// DEBUG
-#include <stdlib.h>
-#include <stdio.h>
-
-// Port D: digital pins of the AVR chipset
-#define NUMLOCK_PORT    (1 << 0)  // D0
-#define CAPSLOCK_PORT   (1 << 1)  // D1
-#define BACKLIGHT_PORT  (1 << 4)  // D4
-#define SCROLLLOCK_PORT (1 << 6)  // D6
-
-#define TIMER_CLK_DIV64			  0x03	///< Timer clocked at F_CPU/64
-#define TIMER1PRESCALE	TIMER_CLK_DIV64 ///< timer 1 prescaler default
-
-#define TIMER_PRESCALE_MASK		0x07	///< Timer Prescaler Bit-Mask
-
-#define PWM_MAX 0xFF
-#define TIMER_TOP 255 // 8 bit PWM
-
-extern backlight_config_t backlight_config;
-
-/**
- * References
- * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
- * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
- * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
- * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
- * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
- */
-
-// @Override
-// turn LEDs on and off depending on USB caps/num/scroll lock states.
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-      // turn on
-      DDRD  |= NUMLOCK_PORT;
-      PORTD |= NUMLOCK_PORT;
-    } else {
-      // turn off
-      DDRD  &= ~NUMLOCK_PORT;
-      PORTD &= ~NUMLOCK_PORT;
-    }
-
-    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-      DDRD  |= CAPSLOCK_PORT;
-      PORTD |= CAPSLOCK_PORT;
-    } else {
-      DDRD  &= ~CAPSLOCK_PORT;
-      PORTD &= ~CAPSLOCK_PORT;
-    }
-
-    if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-      DDRD  |= SCROLLLOCK_PORT;
-      PORTD |= SCROLLLOCK_PORT;
-    } else {
-      DDRD  &= ~SCROLLLOCK_PORT;
-      PORTD &= ~SCROLLLOCK_PORT;
-    }
-}
-
-#ifdef BACKLIGHT_ENABLE
-
-// sets up Timer 1 for 8-bit PWM
-void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
-  // default 8 bit mode
-  TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
-  TCCR1A |= (1 << 0);  // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
-
-  // clear output compare value A
-  // outb(OCR1AH, 0);
-  // outb(OCR1AL, 0);
-
-  // clear output comparator registers for B
-	OCR1BH = 0; // outb(OCR1BH, 0);
-	OCR1BL = 0; // outb(OCR1BL, 0);
-}
-
-bool is_init = false;
-void timer1Init(void) {
-  // timer1SetPrescaler(TIMER1PRESCALE)
-  // set to DIV/64
-  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
-
-  // reset TCNT1
-  TCNT1H = 0;  // outb(TCNT1H, 0);
-	TCNT1L = 0;  // outb(TCNT1L, 0);
-
-  // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
-	TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
-
-  is_init = true;
-}
-
-void timer1UnInit(void) {
-  // set prescaler back to NONE
-  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00;  // TIMERRTC_CLK_STOP
-
-  // disable timer overflow interrupt
-  TIMSK &= ~_BV(TOIE1); // overflow bit?
-
-  setPWM(0);
-
-  is_init = false;
-}
-
-
-// handle TCNT1 overflow
-//! Interrupt handler for tcnt1 overflow interrupt
-ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
-{
-	// sei();
-  // handle breathing here
-  #ifdef BACKLIGHT_BREATHING
-  if (is_breathing()) {
-    custom_breathing_handler();
-  }
-  #endif
-
-  // TODO call user defined function
-}
-
-// enable timer 1 PWM
-// timer1PWMBOn()
-void timer1PWMBEnable(void) {
-  // turn on channel B (OC1B) PWM output
-  // set OC1B as non-inverted PWM
-  TCCR1A |= _BV(COM1B1);
-  TCCR1A &= ~_BV(COM1B0);
-}
-
-// disable timer 1 PWM
-// timer1PWMBOff()
-void timer1PWMBDisable(void) {
-  TCCR1A &= ~_BV(COM1B1);
-  TCCR1A &= ~_BV(COM1B0);
-}
-
-void enableBacklight(void) {
-  DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
-  PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
-}
-
-void disableBacklight(void) {
-  // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
-  PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
-}
-
-void startPWM(void) {
-  timer1Init();
-  timer1PWMBEnable();
-  enableBacklight();
-}
-
-void stopPWM(void) {
-  timer1UnInit();
-  disableBacklight();
-  timer1PWMBDisable();
-}
-
-void b_led_init_ports(void) {
-  /* turn backlight on/off depending on user preference */
-  #if BACKLIGHT_ON_STATE == 0
-    // DDRx register: sets the direction of Port D
-    // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
-    PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
-  #else
-    DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
-    PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
-  #endif
-
-  timer1PWMSetup();
-  startPWM();
-
-  #ifdef BACKLIGHT_BREATHING
-  breathing_enable();
-  #endif
-}
-
-void b_led_set(uint8_t level) {
-  if (level > BACKLIGHT_LEVELS) {
-    level = BACKLIGHT_LEVELS;
-  }
-
-  setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
-}
-
-// called every matrix scan
-void b_led_task(void) {
-  // do nothing for now
-}
-
-void setPWM(uint16_t xValue) {
-  if (xValue > TIMER_TOP) {
-    xValue = TIMER_TOP;
-  }
-  OCR1B = xValue; // timer1PWMBSet(xValue);
-}
-
-#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/jj50/backlight_custom.h b/keyboards/jj50/backlight_custom.h
deleted file mode 100644
index 7210be840..000000000
--- a/keyboards/jj50/backlight_custom.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#ifndef BACKLIGHT_CUSTOM_H
-#define BACKLIGHT_CUSTOM_H
-
-#include <avr/pgmspace.h>
-void b_led_init_ports(void);
-void b_led_set(uint8_t level);
-void b_led_task(void);
-void setPWM(uint16_t xValue);
-
-#endif  // BACKLIGHT_CUSTOM_H
diff --git a/keyboards/jj50/breathing_custom.h b/keyboards/jj50/breathing_custom.h
deleted file mode 100644
index 71416b1b4..000000000
--- a/keyboards/jj50/breathing_custom.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/**
- * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
- * Works in conjunction with `backlight.c`.
- *
- * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
- * handler in `backlight.c` instead of setting up its own timer.
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#ifdef BACKLIGHT_ENABLE
-#ifdef BACKLIGHT_BREATHING
-
-#include "backlight_custom.h"
-
-#ifndef BREATHING_PERIOD
-#define BREATHING_PERIOD 6
-#endif
-
-#define breathing_min() do {breathing_counter = 0;} while (0)
-#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
-
-// TODO make this share code with quantum.c
-
-#define BREATHING_NO_HALT  0
-#define BREATHING_HALT_OFF 1
-#define BREATHING_HALT_ON  2
-#define BREATHING_STEPS 128
-
-static uint8_t breathing_period = BREATHING_PERIOD;
-static uint8_t breathing_halt = BREATHING_NO_HALT;
-static uint16_t breathing_counter = 0;
-
-static bool breathing = false;
-
-bool is_breathing(void) {
-  return breathing;
-}
-
-// See http://jared.geek.nz/2013/feb/linear-led-pwm
-static uint16_t cie_lightness(uint16_t v) {
-  if (v <= 5243) // if below 8% of max
-    return v / 9; // same as dividing by 900%
-  else {
-    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
-    // to get a useful result with integer division, we shift left in the expression above
-    // and revert what we've done again after squaring.
-    y = y * y * y >> 8;
-    if (y > 0xFFFFUL) // prevent overflow
-      return 0xFFFFU;
-    else
-      return (uint16_t) y;
-  }
-}
-
-void breathing_enable(void) {
-  breathing = true;
-  breathing_counter = 0;
-  breathing_halt = BREATHING_NO_HALT;
-  // interrupt already registered
-}
-
-void breathing_pulse(void) {
-  if (get_backlight_level() == 0)
-    breathing_min();
-  else
-    breathing_max();
-  breathing_halt = BREATHING_HALT_ON;
-  // breathing_interrupt_enable();
-  breathing = true;
-}
-
-void breathing_disable(void) {
-  breathing = false;
-  // backlight_set(get_backlight_level());
-  b_led_set(get_backlight_level()); // custom implementation of backlight_set()
-}
-
-void breathing_self_disable(void)
-{
-  if (get_backlight_level() == 0)
-    breathing_halt = BREATHING_HALT_OFF;
-  else
-    breathing_halt = BREATHING_HALT_ON;
-}
-
-void breathing_toggle(void) {
-  if (is_breathing())
-    breathing_disable();
-  else
-    breathing_enable();
-}
-
-void breathing_period_set(uint8_t value)
-{
-  if (!value)
-    value = 1;
-  breathing_period = value;
-}
-
-void breathing_period_default(void) {
-  breathing_period_set(BREATHING_PERIOD);
-}
-
-void breathing_period_inc(void)
-{
-  breathing_period_set(breathing_period+1);
-}
-
-void breathing_period_dec(void)
-{
-  breathing_period_set(breathing_period-1);
-}
-
-/* To generate breathing curve in python:
- * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
- */
-static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-
-// Use this before the cie_lightness function.
-static inline uint16_t scale_backlight(uint16_t v) {
-  return v / BACKLIGHT_LEVELS * get_backlight_level();
-}
-
-void custom_breathing_handler(void) {
-  uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
-  // resetting after one period to prevent ugly reset at overflow.
-  breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
-  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
-
-  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
-      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
-  {
-      // breathing_interrupt_disable();
-  }
-
-  setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
-}
-
-#endif // BACKLIGHT_BREATHING
-#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/jj50/config.h b/keyboards/jj50/config.h
index 884a28d50..9b9feb067 100644
--- a/keyboards/jj50/config.h
+++ b/keyboards/jj50/config.h
@@ -38,7 +38,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4 }
 #define DIODE_DIRECTION COL2ROW
 
-//#define BACKLIGHT_PIN D4
+#define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 12
 
 #define RGB_DI_PIN E2
diff --git a/keyboards/jj50/jj50.c b/keyboards/jj50/jj50.c
index a302adf40..91b10aebe 100644
--- a/keyboards/jj50/jj50.c
+++ b/keyboards/jj50/jj50.c
@@ -16,20 +16,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "jj50.h"
-
-#include "backlight.h"
-#include "backlight_custom.h"
-
-#ifdef BACKLIGHT_ENABLE
-void backlight_init_ports(void) {
-    b_led_init_ports();
-}
-
-void backlight_task(void) {
-    b_led_task();
-}
-
-void backlight_set(uint8_t level) {
-    b_led_set(level);
-}
-#endif
diff --git a/keyboards/jj50/rules.mk b/keyboards/jj50/rules.mk
index 62b21e4df..38faf3716 100644
--- a/keyboards/jj50/rules.mk
+++ b/keyboards/jj50/rules.mk
@@ -29,6 +29,4 @@ SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 #OPT_DEFS = -DDEBUG_LEVEL=0
 
-SRC = backlight.c
-
 LAYOUTS = ortho_5x12
diff --git a/keyboards/kbdfans/kbdpad/mk1/mk1.c b/keyboards/kbdfans/kbdpad/mk1/mk1.c
index aa781875c..f5fe47741 100644
--- a/keyboards/kbdfans/kbdpad/mk1/mk1.c
+++ b/keyboards/kbdfans/kbdpad/mk1/mk1.c
@@ -16,14 +16,19 @@
 
 #include "mk1.h"
 
-#define NUMLOCK_PIN D0
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
 
-void matrix_init_kb(void) {
-    setPinOutput(NUMLOCK_PIN);
-    matrix_init_user();
+void led_init_ports(void) {
+    setPinOutput(D0);
+    writePinHigh(D0);
 }
 
-void led_set_kb(uint8_t usb_led) {
-    writePin(NUMLOCK_PIN, IS_LED_ON(usb_led, USB_LED_NUM_LOCK));
-    led_set_user(usb_led);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D0, !led_state.num_lock);
+    }
+    return true;
 }
diff --git a/keyboards/mechmini/v1/config.h b/keyboards/mechmini/v1/config.h
index eb15a368a..07422f9ff 100644
--- a/keyboards/mechmini/v1/config.h
+++ b/keyboards/mechmini/v1/config.h
@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef V1_CONFIG_H
-#define V1_CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -38,11 +37,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define NO_UART 1
 
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
+
 /* RGB underglow */
 // The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
 // The same pin is used on the JJ40, at least.
 #define RGBLED_NUM 16
 #define RGBLIGHT_ANIMATIONS
 #define RGB_DI_PIN E2
-
-#endif
diff --git a/keyboards/mechmini/v1/rules.mk b/keyboards/mechmini/v1/rules.mk
index 1c6252c59..6f2adc2f8 100644
--- a/keyboards/mechmini/v1/rules.mk
+++ b/keyboards/mechmini/v1/rules.mk
@@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = yes
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = no
+BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = i2c
 
diff --git a/keyboards/mehkee96/config.h b/keyboards/mehkee96/config.h
index d506626d1..afc9d0a7b 100644
--- a/keyboards/mehkee96/config.h
+++ b/keyboards/mehkee96/config.h
@@ -16,6 +16,9 @@
 #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
 #define DIODE_DIRECTION COL2ROW
 
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
+
 #define RGBLED_NUM 16
 #define RGBLIGHT_ANIMATIONS
 /* key combination for command */
diff --git a/keyboards/mehkee96/mehkee96.c b/keyboards/mehkee96/mehkee96.c
index d9e2bac7a..2da25b6b8 100644
--- a/keyboards/mehkee96/mehkee96.c
+++ b/keyboards/mehkee96/mehkee96.c
@@ -16,3 +16,23 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "mehkee96.h"
+
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
+    setPinOutput(D0);
+    setPinOutput(D1);
+    writePinHigh(D0);
+    writePinHigh(D1);
+}
+
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D0, !led_state.num_lock);
+        writePin(D1, !led_state.caps_lock);
+    }
+    return true;
+}
diff --git a/keyboards/mehkee96/rules.mk b/keyboards/mehkee96/rules.mk
index a7d36548f..772706e6c 100644
--- a/keyboards/mehkee96/rules.mk
+++ b/keyboards/mehkee96/rules.mk
@@ -17,9 +17,9 @@ BOOTLOADER = bootloadHID
 BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = yes	# Console for debug(+400)
+CONSOLE_ENABLE = no	# Console for debug(+400)
 COMMAND_ENABLE = yes    # Commands for debug and configuration
-BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = i2c
 
diff --git a/keyboards/panc60/config.h b/keyboards/panc60/config.h
index c565f39bc..b3bcdc973 100644
--- a/keyboards/panc60/config.h
+++ b/keyboards/panc60/config.h
@@ -37,5 +37,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
+
 #define RGBLIGHT_ANIMATIONS
diff --git a/keyboards/panc60/panc60.c b/keyboards/panc60/panc60.c
index 6bd16a4bd..a200b2587 100644
--- a/keyboards/panc60/panc60.c
+++ b/keyboards/panc60/panc60.c
@@ -16,30 +16,19 @@
 
 #include "panc60.h"
 
-void backlight_init_ports(void) {
-	setPinOutput(D0);
-	setPinOutput(D1);
-	setPinOutput(D4);
-	setPinOutput(D6);
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
 
-	writePinLow(D0);
-	writePinLow(D1);
-	writePinLow(D4);
-	writePinLow(D6);
+void led_init_ports(void) {
+    setPinOutput(D1);
+    writePinHigh(D1);
 }
 
-void backlight_set(uint8_t level) {
-	if (level == 0) {
-		// Turn out the lights
-		writePinLow(D0);
-		writePinLow(D1);
-		writePinLow(D4);
-		writePinLow(D6);
-	} else {
-		// Turn on the lights
-		writePinHigh(D0);
-		writePinHigh(D1);
-		writePinHigh(D4);
-		writePinHigh(D6);
-	}
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
+    }
+    return true;
 }
diff --git a/keyboards/pearl/config.h b/keyboards/pearl/config.h
index 0ae69e8e2..5dbba3ec0 100644
--- a/keyboards/pearl/config.h
+++ b/keyboards/pearl/config.h
@@ -31,7 +31,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 12
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
 
 #define MATRIX_ROWS 4
 #define MATRIX_COLS 13
diff --git a/keyboards/pearl/pearl.c b/keyboards/pearl/pearl.c
index 093b5fdd9..cebbc9fcb 100644
--- a/keyboards/pearl/pearl.c
+++ b/keyboards/pearl/pearl.c
@@ -17,32 +17,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "pearl.h"
 
-void backlight_init_ports(void) {
-    // initialize pins D0, D1, D4 and D6 as output
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
     setPinOutput(D0);
     setPinOutput(D1);
-    setPinOutput(D4);
     setPinOutput(D6);
-
-    // turn backlight LEDs on
     writePinHigh(D0);
     writePinHigh(D1);
-    writePinHigh(D4);
     writePinHigh(D6);
 }
 
-void backlight_set(uint8_t level) {
-    if (level == 0) {
-        // turn backlight LEDs off
-        writePinLow(D0);
-        writePinLow(D1);
-        writePinLow(D4);
-        writePinLow(D6);
-    } else {
-        // turn backlight LEDs on
-        writePinHigh(D0);
-        writePinHigh(D1);
-        writePinHigh(D4);
-        writePinHigh(D6);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D0, !led_state.num_lock);
+        writePin(D1, !led_state.caps_lock);
+        writePin(D6, !led_state.scroll_lock);
     }
+    return true;
 }
diff --git a/keyboards/percent/canoe/canoe.c b/keyboards/percent/canoe/canoe.c
index 79c6330fe..d3c66dbf1 100644
--- a/keyboards/percent/canoe/canoe.c
+++ b/keyboards/percent/canoe/canoe.c
@@ -17,32 +17,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "canoe.h"
 
-#ifdef BACKLIGHT_ENABLE
-void backlight_set(uint8_t level) {
-	if (level == 0) {
-		// Turn out the lights
-		writePinLow(D0);
-		writePinLow(D1);
-		writePinLow(D4);
-		writePinLow(D6);
-	} else {
-		// Turn on the lights
-		writePinHigh(D0);
-		writePinHigh(D1);
-		writePinHigh(D4);
-		writePinHigh(D6);
-	}
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
 }
 
-void backlight_init_ports(void) {
-	setPinOutput(D0);
-	setPinOutput(D1);
-	setPinOutput(D4);
-	setPinOutput(D6);
+void led_init_ports(void) {
+    setPinOutput(D1);
+    writePinHigh(D1);
+}
 
-	writePinLow(D0);
-	writePinLow(D1);
-	writePinLow(D4);
-	writePinLow(D6);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
+    }
+    return true;
 }
-#endif
diff --git a/keyboards/percent/canoe/config.h b/keyboards/percent/canoe/config.h
index 950e0806e..21b3dcea6 100644
--- a/keyboards/percent/canoe/config.h
+++ b/keyboards/percent/canoe/config.h
@@ -38,7 +38,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
+
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1
diff --git a/keyboards/percent/canoe/rules.mk b/keyboards/percent/canoe/rules.mk
index 6340c8122..9661eaefe 100644
--- a/keyboards/percent/canoe/rules.mk
+++ b/keyboards/percent/canoe/rules.mk
@@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = no
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = no
+BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = i2c
 
diff --git a/keyboards/percent/skog/backlight.c b/keyboards/percent/skog/backlight.c
deleted file mode 100644
index 94e8126d8..000000000
--- a/keyboards/percent/skog/backlight.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#include "backlight.h"
-#include "quantum.h"
-
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-
-#include "backlight_custom.h"
-#include "breathing_custom.h"
-
-// DEBUG
-#include <stdlib.h>
-#include <stdio.h>
-
-// Port D: digital pins of the AVR chipset
-#define NUMLOCK_PORT    (1 << 0)  // D0
-#define CAPSLOCK_PORT   (1 << 1)  // D1
-#define BACKLIGHT_PORT  (1 << 4)  // D4
-#define SCROLLLOCK_PORT (1 << 6)  // D6
-
-#define TIMER_CLK_DIV64			  0x03	///< Timer clocked at F_CPU/64
-#define TIMER1PRESCALE	TIMER_CLK_DIV64 ///< timer 1 prescaler default
-
-#define TIMER_PRESCALE_MASK		0x07	///< Timer Prescaler Bit-Mask
-
-#define PWM_MAX 0xFF
-#define TIMER_TOP 255 // 8 bit PWM
-
-extern backlight_config_t backlight_config;
-
-/**
- * References
- * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
- * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
- * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
- * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
- * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
- */
-
-// @Override
-// turn LEDs on and off depending on USB caps/num/scroll lock states.
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-      // turn on
-      DDRD  |= NUMLOCK_PORT;
-      PORTD |= NUMLOCK_PORT;
-    } else {
-      // turn off
-      DDRD  &= ~NUMLOCK_PORT;
-      PORTD &= ~NUMLOCK_PORT;
-    }
-
-    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-      DDRD  |= CAPSLOCK_PORT;
-      PORTD |= CAPSLOCK_PORT;
-    } else {
-      DDRD  &= ~CAPSLOCK_PORT;
-      PORTD &= ~CAPSLOCK_PORT;
-    }
-
-    if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-      DDRD  |= SCROLLLOCK_PORT;
-      PORTD |= SCROLLLOCK_PORT;
-    } else {
-      DDRD  &= ~SCROLLLOCK_PORT;
-      PORTD &= ~SCROLLLOCK_PORT;
-    }
-}
-
-#ifdef BACKLIGHT_ENABLE
-
-// sets up Timer 1 for 8-bit PWM
-void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
-  // default 8 bit mode
-  TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
-  TCCR1A |= (1 << 0);  // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
-
-  // clear output compare value A
-  // outb(OCR1AH, 0);
-  // outb(OCR1AL, 0);
-
-  // clear output comparator registers for B
-	OCR1BH = 0; // outb(OCR1BH, 0);
-	OCR1BL = 0; // outb(OCR1BL, 0);
-}
-
-bool is_init = false;
-void timer1Init(void) {
-  // timer1SetPrescaler(TIMER1PRESCALE)
-  // set to DIV/64
-  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
-
-  // reset TCNT1
-  TCNT1H = 0;  // outb(TCNT1H, 0);
-	TCNT1L = 0;  // outb(TCNT1L, 0);
-
-  // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
-	TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
-
-  is_init = true;
-}
-
-void timer1UnInit(void) {
-  // set prescaler back to NONE
-  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00;  // TIMERRTC_CLK_STOP
-
-  // disable timer overflow interrupt
-  TIMSK &= ~_BV(TOIE1); // overflow bit?
-
-  setPWM(0);
-
-  is_init = false;
-}
-
-
-// handle TCNT1 overflow
-//! Interrupt handler for tcnt1 overflow interrupt
-ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
-{
-	// sei();
-  // handle breathing here
-  #ifdef BACKLIGHT_BREATHING
-  if (is_breathing()) {
-    custom_breathing_handler();
-  }
-  #endif
-}
-
-// enable timer 1 PWM
-// timer1PWMBOn()
-void timer1PWMBEnable(void) {
-  // turn on channel B (OC1B) PWM output
-  // set OC1B as non-inverted PWM
-  TCCR1A |= _BV(COM1B1);
-  TCCR1A &= ~_BV(COM1B0);
-}
-
-// disable timer 1 PWM
-// timer1PWMBOff()
-void timer1PWMBDisable(void) {
-  TCCR1A &= ~_BV(COM1B1);
-  TCCR1A &= ~_BV(COM1B0);
-}
-
-void enableBacklight(void) {
-  DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
-  PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
-}
-
-void disableBacklight(void) {
-  // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
-  PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
-}
-
-void startPWM(void) {
-  timer1Init();
-  timer1PWMBEnable();
-  enableBacklight();
-}
-
-void stopPWM(void) {
-  timer1UnInit();
-  disableBacklight();
-  timer1PWMBDisable();
-}
-
-void b_led_init_ports(void) {
-  /* turn backlight on/off depending on user preference */
-  #if BACKLIGHT_ON_STATE == 0
-    // DDRx register: sets the direction of Port D
-    // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
-    PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
-  #else
-    DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
-    PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
-  #endif
-
-  timer1PWMSetup();
-  startPWM();
-
-  #ifdef BACKLIGHT_BREATHING
-  breathing_enable();
-  #endif
-}
-
-void b_led_set(uint8_t level) {
-  if (level > BACKLIGHT_LEVELS) {
-    level = BACKLIGHT_LEVELS;
-  }
-
-  setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
-}
-
-// called every matrix scan
-void b_led_task(void) {
-  // do nothing for now
-}
-
-void setPWM(uint16_t xValue) {
-  if (xValue > TIMER_TOP) {
-    xValue = TIMER_TOP;
-  }
-  OCR1B = xValue; // timer1PWMBSet(xValue);
-}
-
-#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/percent/skog/backlight_custom.h b/keyboards/percent/skog/backlight_custom.h
deleted file mode 100644
index 51365fe3b..000000000
--- a/keyboards/percent/skog/backlight_custom.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#pragma once
-
-#include <avr/pgmspace.h>
-void b_led_init_ports(void);
-void b_led_set(uint8_t level);
-void b_led_task(void);
-void setPWM(uint16_t xValue);
-
diff --git a/keyboards/percent/skog/breathing_custom.h b/keyboards/percent/skog/breathing_custom.h
deleted file mode 100644
index 71416b1b4..000000000
--- a/keyboards/percent/skog/breathing_custom.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/**
- * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
- * Works in conjunction with `backlight.c`.
- *
- * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
- * handler in `backlight.c` instead of setting up its own timer.
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#ifdef BACKLIGHT_ENABLE
-#ifdef BACKLIGHT_BREATHING
-
-#include "backlight_custom.h"
-
-#ifndef BREATHING_PERIOD
-#define BREATHING_PERIOD 6
-#endif
-
-#define breathing_min() do {breathing_counter = 0;} while (0)
-#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
-
-// TODO make this share code with quantum.c
-
-#define BREATHING_NO_HALT  0
-#define BREATHING_HALT_OFF 1
-#define BREATHING_HALT_ON  2
-#define BREATHING_STEPS 128
-
-static uint8_t breathing_period = BREATHING_PERIOD;
-static uint8_t breathing_halt = BREATHING_NO_HALT;
-static uint16_t breathing_counter = 0;
-
-static bool breathing = false;
-
-bool is_breathing(void) {
-  return breathing;
-}
-
-// See http://jared.geek.nz/2013/feb/linear-led-pwm
-static uint16_t cie_lightness(uint16_t v) {
-  if (v <= 5243) // if below 8% of max
-    return v / 9; // same as dividing by 900%
-  else {
-    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
-    // to get a useful result with integer division, we shift left in the expression above
-    // and revert what we've done again after squaring.
-    y = y * y * y >> 8;
-    if (y > 0xFFFFUL) // prevent overflow
-      return 0xFFFFU;
-    else
-      return (uint16_t) y;
-  }
-}
-
-void breathing_enable(void) {
-  breathing = true;
-  breathing_counter = 0;
-  breathing_halt = BREATHING_NO_HALT;
-  // interrupt already registered
-}
-
-void breathing_pulse(void) {
-  if (get_backlight_level() == 0)
-    breathing_min();
-  else
-    breathing_max();
-  breathing_halt = BREATHING_HALT_ON;
-  // breathing_interrupt_enable();
-  breathing = true;
-}
-
-void breathing_disable(void) {
-  breathing = false;
-  // backlight_set(get_backlight_level());
-  b_led_set(get_backlight_level()); // custom implementation of backlight_set()
-}
-
-void breathing_self_disable(void)
-{
-  if (get_backlight_level() == 0)
-    breathing_halt = BREATHING_HALT_OFF;
-  else
-    breathing_halt = BREATHING_HALT_ON;
-}
-
-void breathing_toggle(void) {
-  if (is_breathing())
-    breathing_disable();
-  else
-    breathing_enable();
-}
-
-void breathing_period_set(uint8_t value)
-{
-  if (!value)
-    value = 1;
-  breathing_period = value;
-}
-
-void breathing_period_default(void) {
-  breathing_period_set(BREATHING_PERIOD);
-}
-
-void breathing_period_inc(void)
-{
-  breathing_period_set(breathing_period+1);
-}
-
-void breathing_period_dec(void)
-{
-  breathing_period_set(breathing_period-1);
-}
-
-/* To generate breathing curve in python:
- * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
- */
-static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-
-// Use this before the cie_lightness function.
-static inline uint16_t scale_backlight(uint16_t v) {
-  return v / BACKLIGHT_LEVELS * get_backlight_level();
-}
-
-void custom_breathing_handler(void) {
-  uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
-  // resetting after one period to prevent ugly reset at overflow.
-  breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
-  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
-
-  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
-      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
-  {
-      // breathing_interrupt_disable();
-  }
-
-  setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
-}
-
-#endif // BACKLIGHT_BREATHING
-#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/percent/skog/config.h b/keyboards/percent/skog/config.h
index 7a0c703ec..15844711f 100644
--- a/keyboards/percent/skog/config.h
+++ b/keyboards/percent/skog/config.h
@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #define VENDOR_ID       0x20A0
 #define PRODUCT_ID      0x422D
@@ -36,8 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 2
 #define RGBLIGHT_ANIMATIONS
 
+#define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 5
 
 #define NO_UART 1
-
-#endif
diff --git a/keyboards/percent/skog/rules.mk b/keyboards/percent/skog/rules.mk
index da03a2e0c..0d243b858 100644
--- a/keyboards/percent/skog/rules.mk
+++ b/keyboards/percent/skog/rules.mk
@@ -21,11 +21,7 @@ BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = i2c
 
-BACKLIGHT_CUSTOM_DRIVER = yes
-
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-SRC = backlight.c
diff --git a/keyboards/percent/skog/skog.c b/keyboards/percent/skog/skog.c
index 1c26c550e..241833937 100644
--- a/keyboards/percent/skog/skog.c
+++ b/keyboards/percent/skog/skog.c
@@ -19,20 +19,22 @@ ps2avrGB support code by Kenneth A. (bminiex/.[ch])
 
 #include "skog.h"
 
-#include "backlight.h"
-#include "backlight_custom.h"
-
-#ifdef BACKLIGHT_ENABLE
-/// Overrides functions in `quantum.c`
-void backlight_init_ports(void) {
-  b_led_init_ports();
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
 }
 
-void backlight_task(void) {
-  b_led_task();
+void led_init_ports(void) {
+    setPinOutput(D1);
+    setPinOutput(D6);
+    writePinHigh(D1);
+    writePinHigh(D6);
 }
 
-void backlight_set(uint8_t level) {
-  b_led_set(level);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
+        writePin(D6, !led_state.scroll_lock);
+    }
+    return true;
 }
-#endif
diff --git a/keyboards/percent/skog_lite/config.h b/keyboards/percent/skog_lite/config.h
index 97d11238e..ec3928b72 100644
--- a/keyboards/percent/skog_lite/config.h
+++ b/keyboards/percent/skog_lite/config.h
@@ -38,5 +38,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
+
 #define RGBLIGHT_ANIMATIONS
diff --git a/keyboards/percent/skog_lite/skog_lite.c b/keyboards/percent/skog_lite/skog_lite.c
index a6c00f529..e611885a6 100644
--- a/keyboards/percent/skog_lite/skog_lite.c
+++ b/keyboards/percent/skog_lite/skog_lite.c
@@ -16,32 +16,22 @@
 
 #include "skog_lite.h"
 
-void backlight_init_ports(void) {
-    // initialize pins D0, D1, D4 and D6 as output
-    setPinOutput(D0);
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
     setPinOutput(D1);
-    setPinOutput(D4);
     setPinOutput(D6);
-
-    // turn backlight LEDs on
-    writePinHigh(D0);
     writePinHigh(D1);
-    writePinHigh(D4);
     writePinHigh(D6);
 }
 
-void backlight_set(uint8_t level) {
-    if (level == 0) {
-        // turn backlight LEDs off
-        writePinLow(D0);
-        writePinLow(D1);
-        writePinLow(D4);
-        writePinLow(D6);
-    } else {
-        // turn backlight LEDs on
-        writePinHigh(D0);
-        writePinHigh(D1);
-        writePinHigh(D4);
-        writePinHigh(D6);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
+        writePin(D6, !led_state.scroll_lock);
     }
+    return true;
 }
diff --git a/keyboards/singa/config.h b/keyboards/singa/config.h
index badaef513..e998e6ea9 100644
--- a/keyboards/singa/config.h
+++ b/keyboards/singa/config.h
@@ -37,5 +37,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
+
 #define RGBLIGHT_ANIMATIONS
diff --git a/keyboards/singa/rules.mk b/keyboards/singa/rules.mk
index 54328d248..84eace5ed 100644
--- a/keyboards/singa/rules.mk
+++ b/keyboards/singa/rules.mk
@@ -15,7 +15,7 @@ BOOTLOADER = bootloadHID
 BOOTMAGIC_ENABLE = no
 MOUSEKEY_ENABLE = yes
 EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = yes
+CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
diff --git a/keyboards/singa/singa.c b/keyboards/singa/singa.c
index 144065d02..7b60e3c29 100644
--- a/keyboards/singa/singa.c
+++ b/keyboards/singa/singa.c
@@ -16,32 +16,19 @@
 
 #include "singa.h"
 
-void backlight_init_ports(void) {
-    // initialize pins D0, D1, D4 and D6 as output
-    setPinOutput(D0);
-    setPinOutput(D1);
-    setPinOutput(D4);
-    setPinOutput(D6);
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
 
-    // turn backlight LEDs on
-    writePinHigh(D0);
+void led_init_ports(void) {
+    setPinOutput(D1);
     writePinHigh(D1);
-    writePinHigh(D4);
-    writePinHigh(D6);
 }
 
-void backlight_set(uint8_t level) {
-    if (level == 0) {
-        // turn backlight LEDs off
-        writePinLow(D0);
-        writePinLow(D1);
-        writePinLow(D4);
-        writePinLow(D6);
-    } else {
-        // turn backlight LEDs on
-        writePinHigh(D0);
-        writePinHigh(D1);
-        writePinHigh(D4);
-        writePinHigh(D6);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
     }
+    return true;
 }
diff --git a/keyboards/tgr/alice/alice.c b/keyboards/tgr/alice/alice.c
index 39aed2cf5..9fb4957ac 100644
--- a/keyboards/tgr/alice/alice.c
+++ b/keyboards/tgr/alice/alice.c
@@ -16,3 +16,26 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "alice.h"
+
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
+    setPinOutput(D0);
+    setPinOutput(D1);
+    setPinOutput(D6);
+    writePinHigh(D0);
+    writePinHigh(D1);
+    writePinHigh(D6);
+}
+
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D0, !led_state.num_lock);
+        writePin(D1, !led_state.caps_lock);
+        writePin(D6, !led_state.scroll_lock);
+    }
+    return true;
+}
diff --git a/keyboards/tgr/alice/config.h b/keyboards/tgr/alice/config.h
index 4c36896b7..1f1b32d4e 100644
--- a/keyboards/tgr/alice/config.h
+++ b/keyboards/tgr/alice/config.h
@@ -33,6 +33,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
 #define DIODE_DIRECTION COL2ROW
 
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
+
 #define RGBLED_NUM 18
 #define RGBLIGHT_ANIMATIONS
 
diff --git a/keyboards/tgr/alice/rules.mk b/keyboards/tgr/alice/rules.mk
index 530e8ea32..a8fea7efa 100644
--- a/keyboards/tgr/alice/rules.mk
+++ b/keyboards/tgr/alice/rules.mk
@@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = no
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = no
+BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = i2c
 
diff --git a/keyboards/tgr/jane/config.h b/keyboards/tgr/jane/config.h
index dd119d3b0..5fb9a9056 100644
--- a/keyboards/tgr/jane/config.h
+++ b/keyboards/tgr/jane/config.h
@@ -36,4 +36,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
diff --git a/keyboards/tgr/jane/jane.c b/keyboards/tgr/jane/jane.c
index 4ab0b3007..24183a0f7 100644
--- a/keyboards/tgr/jane/jane.c
+++ b/keyboards/tgr/jane/jane.c
@@ -16,32 +16,22 @@
 
 #include "jane.h"
 
-void backlight_init_ports(void) {
-    // initialize pins D0, D1, D4 and D6 as output
-    setPinOutput(D0);
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
     setPinOutput(D1);
-    setPinOutput(D4);
     setPinOutput(D6);
-
-    // turn backlight LEDs on
-    writePinHigh(D0);
     writePinHigh(D1);
-    writePinHigh(D4);
     writePinHigh(D6);
 }
 
-void backlight_set(uint8_t level) {
-    if (level == 0) {
-        // turn backlight LEDs off
-        writePinLow(D0);
-        writePinLow(D1);
-        writePinLow(D4);
-        writePinLow(D6);
-    } else {
-        // turn backlight LEDs on
-        writePinHigh(D0);
-        writePinHigh(D1);
-        writePinHigh(D4);
-        writePinHigh(D6);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
+        writePin(D6, !led_state.scroll_lock);
     }
+    return true;
 }
diff --git a/keyboards/unikorn/config.h b/keyboards/unikorn/config.h
index 1c4f3431a..e6bdbe7f2 100644
--- a/keyboards/unikorn/config.h
+++ b/keyboards/unikorn/config.h
@@ -36,7 +36,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
+
 #ifdef RGBLIGHT_ENABLE
 #define RGBLED_NUM 17
 #define RGBLIGHT_ANIMATIONS
diff --git a/keyboards/unikorn/unikorn.c b/keyboards/unikorn/unikorn.c
index 70bc5a988..26a5092a5 100644
--- a/keyboards/unikorn/unikorn.c
+++ b/keyboards/unikorn/unikorn.c
@@ -16,32 +16,19 @@
 
 #include "unikorn.h"
 
-void backlight_init_ports(void) {
-    // initialize pins D0, D1, D4 and D6 as output
-    setPinOutput(D0);
-    setPinOutput(D1);
-    setPinOutput(D4);
-    setPinOutput(D6);
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
 
-    // turn backlight LEDs on
-    writePinHigh(D0);
+void led_init_ports(void) {
+    setPinOutput(D1);
     writePinHigh(D1);
-    writePinHigh(D4);
-    writePinHigh(D6);
 }
 
-void backlight_set(uint8_t level) {
-    if (level == 0) {
-        // turn backlight LEDs off
-        writePinLow(D0);
-        writePinLow(D1);
-        writePinLow(D4);
-        writePinLow(D6);
-    } else {
-        // turn backlight LEDs on
-        writePinHigh(D0);
-        writePinHigh(D1);
-        writePinHigh(D4);
-        writePinHigh(D6);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
     }
+    return true;
 }
diff --git a/keyboards/winkeyless/bface/bface.c b/keyboards/winkeyless/bface/bface.c
index 8cb5b600c..49e8bbcd2 100644
--- a/keyboards/winkeyless/bface/bface.c
+++ b/keyboards/winkeyless/bface/bface.c
@@ -16,32 +16,25 @@
 
 #include "bface.h"
 
-void backlight_init_ports(void) {
-    // initialize pins D0, D1, D4 and D6 as output
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
     setPinOutput(D0);
     setPinOutput(D1);
-    setPinOutput(D4);
     setPinOutput(D6);
-
-    // turn backlight LEDs on
     writePinHigh(D0);
     writePinHigh(D1);
-    writePinHigh(D4);
     writePinHigh(D6);
 }
 
-void backlight_set(uint8_t level) {
-    if (level == 0) {
-        // turn backlight LEDs off
-        writePinLow(D0);
-        writePinLow(D1);
-        writePinLow(D4);
-        writePinLow(D6);
-    } else {
-        // turn backlight LEDs on
-        writePinHigh(D0);
-        writePinHigh(D1);
-        writePinHigh(D4);
-        writePinHigh(D6);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D0, !led_state.num_lock);
+        writePin(D1, !led_state.caps_lock);
+        writePin(D6, !led_state.scroll_lock);
     }
+    return true;
 }
diff --git a/keyboards/winkeyless/bface/config.h b/keyboards/winkeyless/bface/config.h
index 95d44557a..7ada9a49a 100644
--- a/keyboards/winkeyless/bface/config.h
+++ b/keyboards/winkeyless/bface/config.h
@@ -42,10 +42,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define NO_UART 1
 
-#ifdef BACKLIGHT_ENABLE
-	// the backlight PWM does not work (yet). Therefore, we only have two backlight levels (on/off)
-	#define BACKLIGHT_LEVELS 1
-	#define LED_PIN PORTD
-	#define BACKLIGHT_PORT_NUM (1 << 4)
-#endif
-
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
diff --git a/keyboards/winkeyless/bface/rules.mk b/keyboards/winkeyless/bface/rules.mk
index 506e37ac9..84eace5ed 100644
--- a/keyboards/winkeyless/bface/rules.mk
+++ b/keyboards/winkeyless/bface/rules.mk
@@ -18,8 +18,6 @@ EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
-BACKLIGHT_CUSTOM_DRIVER = yes
-BACKLIGHT_BREATHING = no
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = i2c
 
diff --git a/keyboards/winkeyless/bmini/bmini.c b/keyboards/winkeyless/bmini/bmini.c
index f44fd36a8..fe3b74be1 100644
--- a/keyboards/winkeyless/bmini/bmini.c
+++ b/keyboards/winkeyless/bmini/bmini.c
@@ -16,3 +16,26 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "bmini.h"
+
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
+    setPinOutput(D0);
+    setPinOutput(D1);
+    setPinOutput(D6);
+    writePinHigh(D0);
+    writePinHigh(D1);
+    writePinHigh(D6);
+}
+
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D0, !led_state.num_lock);
+        writePin(D1, !led_state.caps_lock);
+        writePin(D6, !led_state.scroll_lock);
+    }
+    return true;
+}
diff --git a/keyboards/winkeyless/bmini/config.h b/keyboards/winkeyless/bmini/config.h
index f8a26e4f0..95c44be9a 100644
--- a/keyboards/winkeyless/bmini/config.h
+++ b/keyboards/winkeyless/bmini/config.h
@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef BMINI_CONFIG_H
-#define BMINI_CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -37,6 +36,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBLIGHT_ANIMATIONS
 
-#define NO_UART 1
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
 
-#endif
+#define NO_UART 1
diff --git a/keyboards/winkeyless/bmini/rules.mk b/keyboards/winkeyless/bmini/rules.mk
index 530e8ea32..a8fea7efa 100644
--- a/keyboards/winkeyless/bmini/rules.mk
+++ b/keyboards/winkeyless/bmini/rules.mk
@@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = no
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = no
+BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = i2c
 
diff --git a/keyboards/winkeyless/bminiex/backlight.c b/keyboards/winkeyless/bminiex/backlight.c
deleted file mode 100644
index 94e8126d8..000000000
--- a/keyboards/winkeyless/bminiex/backlight.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#include "backlight.h"
-#include "quantum.h"
-
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-
-#include "backlight_custom.h"
-#include "breathing_custom.h"
-
-// DEBUG
-#include <stdlib.h>
-#include <stdio.h>
-
-// Port D: digital pins of the AVR chipset
-#define NUMLOCK_PORT    (1 << 0)  // D0
-#define CAPSLOCK_PORT   (1 << 1)  // D1
-#define BACKLIGHT_PORT  (1 << 4)  // D4
-#define SCROLLLOCK_PORT (1 << 6)  // D6
-
-#define TIMER_CLK_DIV64			  0x03	///< Timer clocked at F_CPU/64
-#define TIMER1PRESCALE	TIMER_CLK_DIV64 ///< timer 1 prescaler default
-
-#define TIMER_PRESCALE_MASK		0x07	///< Timer Prescaler Bit-Mask
-
-#define PWM_MAX 0xFF
-#define TIMER_TOP 255 // 8 bit PWM
-
-extern backlight_config_t backlight_config;
-
-/**
- * References
- * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
- * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
- * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
- * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
- * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
- */
-
-// @Override
-// turn LEDs on and off depending on USB caps/num/scroll lock states.
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-      // turn on
-      DDRD  |= NUMLOCK_PORT;
-      PORTD |= NUMLOCK_PORT;
-    } else {
-      // turn off
-      DDRD  &= ~NUMLOCK_PORT;
-      PORTD &= ~NUMLOCK_PORT;
-    }
-
-    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-      DDRD  |= CAPSLOCK_PORT;
-      PORTD |= CAPSLOCK_PORT;
-    } else {
-      DDRD  &= ~CAPSLOCK_PORT;
-      PORTD &= ~CAPSLOCK_PORT;
-    }
-
-    if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-      DDRD  |= SCROLLLOCK_PORT;
-      PORTD |= SCROLLLOCK_PORT;
-    } else {
-      DDRD  &= ~SCROLLLOCK_PORT;
-      PORTD &= ~SCROLLLOCK_PORT;
-    }
-}
-
-#ifdef BACKLIGHT_ENABLE
-
-// sets up Timer 1 for 8-bit PWM
-void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
-  // default 8 bit mode
-  TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
-  TCCR1A |= (1 << 0);  // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
-
-  // clear output compare value A
-  // outb(OCR1AH, 0);
-  // outb(OCR1AL, 0);
-
-  // clear output comparator registers for B
-	OCR1BH = 0; // outb(OCR1BH, 0);
-	OCR1BL = 0; // outb(OCR1BL, 0);
-}
-
-bool is_init = false;
-void timer1Init(void) {
-  // timer1SetPrescaler(TIMER1PRESCALE)
-  // set to DIV/64
-  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
-
-  // reset TCNT1
-  TCNT1H = 0;  // outb(TCNT1H, 0);
-	TCNT1L = 0;  // outb(TCNT1L, 0);
-
-  // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
-	TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
-
-  is_init = true;
-}
-
-void timer1UnInit(void) {
-  // set prescaler back to NONE
-  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00;  // TIMERRTC_CLK_STOP
-
-  // disable timer overflow interrupt
-  TIMSK &= ~_BV(TOIE1); // overflow bit?
-
-  setPWM(0);
-
-  is_init = false;
-}
-
-
-// handle TCNT1 overflow
-//! Interrupt handler for tcnt1 overflow interrupt
-ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
-{
-	// sei();
-  // handle breathing here
-  #ifdef BACKLIGHT_BREATHING
-  if (is_breathing()) {
-    custom_breathing_handler();
-  }
-  #endif
-}
-
-// enable timer 1 PWM
-// timer1PWMBOn()
-void timer1PWMBEnable(void) {
-  // turn on channel B (OC1B) PWM output
-  // set OC1B as non-inverted PWM
-  TCCR1A |= _BV(COM1B1);
-  TCCR1A &= ~_BV(COM1B0);
-}
-
-// disable timer 1 PWM
-// timer1PWMBOff()
-void timer1PWMBDisable(void) {
-  TCCR1A &= ~_BV(COM1B1);
-  TCCR1A &= ~_BV(COM1B0);
-}
-
-void enableBacklight(void) {
-  DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
-  PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
-}
-
-void disableBacklight(void) {
-  // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
-  PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
-}
-
-void startPWM(void) {
-  timer1Init();
-  timer1PWMBEnable();
-  enableBacklight();
-}
-
-void stopPWM(void) {
-  timer1UnInit();
-  disableBacklight();
-  timer1PWMBDisable();
-}
-
-void b_led_init_ports(void) {
-  /* turn backlight on/off depending on user preference */
-  #if BACKLIGHT_ON_STATE == 0
-    // DDRx register: sets the direction of Port D
-    // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
-    PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
-  #else
-    DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
-    PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
-  #endif
-
-  timer1PWMSetup();
-  startPWM();
-
-  #ifdef BACKLIGHT_BREATHING
-  breathing_enable();
-  #endif
-}
-
-void b_led_set(uint8_t level) {
-  if (level > BACKLIGHT_LEVELS) {
-    level = BACKLIGHT_LEVELS;
-  }
-
-  setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
-}
-
-// called every matrix scan
-void b_led_task(void) {
-  // do nothing for now
-}
-
-void setPWM(uint16_t xValue) {
-  if (xValue > TIMER_TOP) {
-    xValue = TIMER_TOP;
-  }
-  OCR1B = xValue; // timer1PWMBSet(xValue);
-}
-
-#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/winkeyless/bminiex/backlight_custom.h b/keyboards/winkeyless/bminiex/backlight_custom.h
deleted file mode 100644
index 51365fe3b..000000000
--- a/keyboards/winkeyless/bminiex/backlight_custom.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#pragma once
-
-#include <avr/pgmspace.h>
-void b_led_init_ports(void);
-void b_led_set(uint8_t level);
-void b_led_task(void);
-void setPWM(uint16_t xValue);
-
diff --git a/keyboards/winkeyless/bminiex/bminiex.c b/keyboards/winkeyless/bminiex/bminiex.c
index 11315b921..365aeee2b 100644
--- a/keyboards/winkeyless/bminiex/bminiex.c
+++ b/keyboards/winkeyless/bminiex/bminiex.c
@@ -17,20 +17,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "bminiex.h"
 
-#include "backlight.h"
-#include "backlight_custom.h"
-
-#ifdef BACKLIGHT_ENABLE
-/// Overrides functions in `quantum.c`
-void backlight_init_ports(void) {
-  b_led_init_ports();
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
 }
 
-void backlight_task(void) {
-  b_led_task();
+void led_init_ports(void) {
+    setPinOutput(D0);
+    setPinOutput(D1);
+    setPinOutput(D6);
+    writePinHigh(D0);
+    writePinHigh(D1);
+    writePinHigh(D6);
 }
 
-void backlight_set(uint8_t level) {
-  b_led_set(level);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D0, !led_state.num_lock);
+        writePin(D1, !led_state.caps_lock);
+        writePin(D6, !led_state.scroll_lock);
+    }
+    return true;
 }
-#endif
diff --git a/keyboards/winkeyless/bminiex/breathing_custom.h b/keyboards/winkeyless/bminiex/breathing_custom.h
deleted file mode 100644
index 71416b1b4..000000000
--- a/keyboards/winkeyless/bminiex/breathing_custom.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/**
- * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
- * Works in conjunction with `backlight.c`.
- *
- * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
- * handler in `backlight.c` instead of setting up its own timer.
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#ifdef BACKLIGHT_ENABLE
-#ifdef BACKLIGHT_BREATHING
-
-#include "backlight_custom.h"
-
-#ifndef BREATHING_PERIOD
-#define BREATHING_PERIOD 6
-#endif
-
-#define breathing_min() do {breathing_counter = 0;} while (0)
-#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
-
-// TODO make this share code with quantum.c
-
-#define BREATHING_NO_HALT  0
-#define BREATHING_HALT_OFF 1
-#define BREATHING_HALT_ON  2
-#define BREATHING_STEPS 128
-
-static uint8_t breathing_period = BREATHING_PERIOD;
-static uint8_t breathing_halt = BREATHING_NO_HALT;
-static uint16_t breathing_counter = 0;
-
-static bool breathing = false;
-
-bool is_breathing(void) {
-  return breathing;
-}
-
-// See http://jared.geek.nz/2013/feb/linear-led-pwm
-static uint16_t cie_lightness(uint16_t v) {
-  if (v <= 5243) // if below 8% of max
-    return v / 9; // same as dividing by 900%
-  else {
-    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
-    // to get a useful result with integer division, we shift left in the expression above
-    // and revert what we've done again after squaring.
-    y = y * y * y >> 8;
-    if (y > 0xFFFFUL) // prevent overflow
-      return 0xFFFFU;
-    else
-      return (uint16_t) y;
-  }
-}
-
-void breathing_enable(void) {
-  breathing = true;
-  breathing_counter = 0;
-  breathing_halt = BREATHING_NO_HALT;
-  // interrupt already registered
-}
-
-void breathing_pulse(void) {
-  if (get_backlight_level() == 0)
-    breathing_min();
-  else
-    breathing_max();
-  breathing_halt = BREATHING_HALT_ON;
-  // breathing_interrupt_enable();
-  breathing = true;
-}
-
-void breathing_disable(void) {
-  breathing = false;
-  // backlight_set(get_backlight_level());
-  b_led_set(get_backlight_level()); // custom implementation of backlight_set()
-}
-
-void breathing_self_disable(void)
-{
-  if (get_backlight_level() == 0)
-    breathing_halt = BREATHING_HALT_OFF;
-  else
-    breathing_halt = BREATHING_HALT_ON;
-}
-
-void breathing_toggle(void) {
-  if (is_breathing())
-    breathing_disable();
-  else
-    breathing_enable();
-}
-
-void breathing_period_set(uint8_t value)
-{
-  if (!value)
-    value = 1;
-  breathing_period = value;
-}
-
-void breathing_period_default(void) {
-  breathing_period_set(BREATHING_PERIOD);
-}
-
-void breathing_period_inc(void)
-{
-  breathing_period_set(breathing_period+1);
-}
-
-void breathing_period_dec(void)
-{
-  breathing_period_set(breathing_period-1);
-}
-
-/* To generate breathing curve in python:
- * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
- */
-static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-
-// Use this before the cie_lightness function.
-static inline uint16_t scale_backlight(uint16_t v) {
-  return v / BACKLIGHT_LEVELS * get_backlight_level();
-}
-
-void custom_breathing_handler(void) {
-  uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
-  // resetting after one period to prevent ugly reset at overflow.
-  breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
-  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
-
-  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
-      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
-  {
-      // breathing_interrupt_disable();
-  }
-
-  setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
-}
-
-#endif // BACKLIGHT_BREATHING
-#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/winkeyless/bminiex/config.h b/keyboards/winkeyless/bminiex/config.h
index 037ca0028..8952796a8 100644
--- a/keyboards/winkeyless/bminiex/config.h
+++ b/keyboards/winkeyless/bminiex/config.h
@@ -36,6 +36,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBLIGHT_ANIMATIONS
 
+#define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 5
 
 #define NO_UART 1
diff --git a/keyboards/winkeyless/bminiex/rules.mk b/keyboards/winkeyless/bminiex/rules.mk
index 2c999dcbf..df7124400 100644
--- a/keyboards/winkeyless/bminiex/rules.mk
+++ b/keyboards/winkeyless/bminiex/rules.mk
@@ -19,7 +19,6 @@ CONSOLE_ENABLE = no
 DEBUG_ENABLE = no
 COMMAND_ENABLE = no
 BACKLIGHT_ENABLE = yes
-BACKLIGHT_CUSTOM_DRIVER = yes
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = i2c
 TAP_DANCE_ENABLE = no
@@ -28,5 +27,3 @@ TAP_DANCE_ENABLE = no
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-SRC += backlight.c
diff --git a/keyboards/ymd75/backlight.c b/keyboards/ymd75/backlight.c
deleted file mode 100644
index cb0a97923..000000000
--- a/keyboards/ymd75/backlight.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- Modified by Wayne K Jones (github.com/WarmCatUK) 2018
- */
-
-#include "backlight.h"
-#include "quantum.h"
-
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-
-#include "backlight_custom.h"
-#include "breathing_custom.h"
-
-// DEBUG
-#include <stdlib.h>
-#include <stdio.h>
-
-// Port D: digital pins of the AVR chipset
-//#define NUMLOCK_PORT    (1 << 2)  // 2nd pin of Port D (digital)
-#define CAPSLOCK_PORT   (1 << 1)  // 1st pin
-#define BACKLIGHT_PORT  (1 << 4)  // D4
-//#define SCROLLLOCK_PORT (1 << 6)  // D6
-
-#define TIMER_CLK_DIV64			  0x03	///< Timer clocked at F_CPU/64
-#define TIMER1PRESCALE	TIMER_CLK_DIV64 ///< timer 1 prescaler default
-
-#define TIMER_PRESCALE_MASK		0x07	///< Timer Prescaler Bit-Mask
-
-#define PWM_MAX 0xFF
-#define TIMER_TOP 255 // 8 bit PWM
-
-extern backlight_config_t backlight_config;
-
-/**
- * References
- * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
- * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
- * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
- * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
- * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
- */
-
-// @Override
-// turn LEDs on and off depending on USB caps/num/scroll lock states.
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-    /*
-    if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-      // turn on
-      DDRD  |= NUMLOCK_PORT;
-      PORTD |= NUMLOCK_PORT;
-    } else {
-      // turn off
-      DDRD  &= ~NUMLOCK_PORT;
-      PORTD &= ~NUMLOCK_PORT;
-    }
-     */
-    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-      DDRD  |= CAPSLOCK_PORT;
-      PORTD |= CAPSLOCK_PORT;
-    } else {
-      DDRD  &= ~CAPSLOCK_PORT;
-      PORTD &= ~CAPSLOCK_PORT;
-    }
-    /*
-    if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-      DDRD  |= SCROLLLOCK_PORT;
-      PORTD |= SCROLLLOCK_PORT;
-    } else {
-      DDRD  &= ~SCROLLLOCK_PORT;
-      PORTD &= ~SCROLLLOCK_PORT;
-    }
-     */
-}
-
-#ifdef BACKLIGHT_ENABLE
-
-// sets up Timer 1 for 8-bit PWM
-void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
-  // default 8 bit mode
-  TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
-  TCCR1A |= (1 << 0);  // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
-
-  // clear output compare value A
-  // outb(OCR1AH, 0);
-  // outb(OCR1AL, 0);
-
-  // clear output comparator registers for B
-	OCR1BH = 0; // outb(OCR1BH, 0);
-	OCR1BL = 0; // outb(OCR1BL, 0);
-}
-
-bool is_init = false;
-void timer1Init(void) {
-  // timer1SetPrescaler(TIMER1PRESCALE)
-  // set to DIV/64
-  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
-
-  // reset TCNT1
-  TCNT1H = 0;  // outb(TCNT1H, 0);
-	TCNT1L = 0;  // outb(TCNT1L, 0);
-
-  // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
-	TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
-
-  is_init = true;
-}
-
-void timer1UnInit(void) {
-  // set prescaler back to NONE
-  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00;  // TIMERRTC_CLK_STOP
-
-  // disable timer overflow interrupt
-  TIMSK &= ~_BV(TOIE1); // overflow bit?
-
-  setPWM(0);
-
-  is_init = false;
-}
-
-
-// handle TCNT1 overflow
-//! Interrupt handler for tcnt1 overflow interrupt
-ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
-{
-	// sei();
-  // handle breathing here
-  #ifdef BACKLIGHT_BREATHING
-  if (is_breathing()) {
-    custom_breathing_handler();
-  }
-  #endif
-
-  // TODO call user defined function
-}
-
-// enable timer 1 PWM
-// timer1PWMBOn()
-void timer1PWMBEnable(void) {
-  // turn on channel B (OC1B) PWM output
-  // set OC1B as non-inverted PWM
-  TCCR1A |= _BV(COM1B1);
-  TCCR1A &= ~_BV(COM1B0);
-}
-
-// disable timer 1 PWM
-// timer1PWMBOff()
-void timer1PWMBDisable(void) {
-  TCCR1A &= ~_BV(COM1B1);
-  TCCR1A &= ~_BV(COM1B0);
-}
-
-void enableBacklight(void) {
-  DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
-  PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
-}
-
-void disableBacklight(void) {
-  // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
-  PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
-}
-
-void startPWM(void) {
-  timer1Init();
-  timer1PWMBEnable();
-  enableBacklight();
-}
-
-void stopPWM(void) {
-  timer1UnInit();
-  disableBacklight();
-  timer1PWMBDisable();
-}
-
-void b_led_init_ports(void) {
-  /* turn backlight on/off depending on user preference */
-  #if BACKLIGHT_ON_STATE == 0
-    // DDRx register: sets the direction of Port D
-    // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
-    PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
-  #else
-    DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
-    PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
-  #endif
-
-  timer1PWMSetup();
-  startPWM();
-
-  #ifdef BACKLIGHT_BREATHING
-  breathing_enable();
-  #endif
-}
-
-void b_led_set(uint8_t level) {
-  if (level > BACKLIGHT_LEVELS) {
-    level = BACKLIGHT_LEVELS;
-  }
-
-  setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
-}
-
-// called every matrix scan
-void b_led_task(void) {
-  // do nothing for now
-}
-
-void setPWM(uint16_t xValue) {
-  if (xValue > TIMER_TOP) {
-    xValue = TIMER_TOP;
-  }
-  OCR1B = xValue; // timer1PWMBSet(xValue);
-}
-
-#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/ymd75/backlight_custom.h b/keyboards/ymd75/backlight_custom.h
deleted file mode 100644
index 7210be840..000000000
--- a/keyboards/ymd75/backlight_custom.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#ifndef BACKLIGHT_CUSTOM_H
-#define BACKLIGHT_CUSTOM_H
-
-#include <avr/pgmspace.h>
-void b_led_init_ports(void);
-void b_led_set(uint8_t level);
-void b_led_task(void);
-void setPWM(uint16_t xValue);
-
-#endif  // BACKLIGHT_CUSTOM_H
diff --git a/keyboards/ymd75/breathing_custom.h b/keyboards/ymd75/breathing_custom.h
deleted file mode 100644
index 71416b1b4..000000000
--- a/keyboards/ymd75/breathing_custom.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/**
- * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
- * Works in conjunction with `backlight.c`.
- *
- * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
- * handler in `backlight.c` instead of setting up its own timer.
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#ifdef BACKLIGHT_ENABLE
-#ifdef BACKLIGHT_BREATHING
-
-#include "backlight_custom.h"
-
-#ifndef BREATHING_PERIOD
-#define BREATHING_PERIOD 6
-#endif
-
-#define breathing_min() do {breathing_counter = 0;} while (0)
-#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
-
-// TODO make this share code with quantum.c
-
-#define BREATHING_NO_HALT  0
-#define BREATHING_HALT_OFF 1
-#define BREATHING_HALT_ON  2
-#define BREATHING_STEPS 128
-
-static uint8_t breathing_period = BREATHING_PERIOD;
-static uint8_t breathing_halt = BREATHING_NO_HALT;
-static uint16_t breathing_counter = 0;
-
-static bool breathing = false;
-
-bool is_breathing(void) {
-  return breathing;
-}
-
-// See http://jared.geek.nz/2013/feb/linear-led-pwm
-static uint16_t cie_lightness(uint16_t v) {
-  if (v <= 5243) // if below 8% of max
-    return v / 9; // same as dividing by 900%
-  else {
-    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
-    // to get a useful result with integer division, we shift left in the expression above
-    // and revert what we've done again after squaring.
-    y = y * y * y >> 8;
-    if (y > 0xFFFFUL) // prevent overflow
-      return 0xFFFFU;
-    else
-      return (uint16_t) y;
-  }
-}
-
-void breathing_enable(void) {
-  breathing = true;
-  breathing_counter = 0;
-  breathing_halt = BREATHING_NO_HALT;
-  // interrupt already registered
-}
-
-void breathing_pulse(void) {
-  if (get_backlight_level() == 0)
-    breathing_min();
-  else
-    breathing_max();
-  breathing_halt = BREATHING_HALT_ON;
-  // breathing_interrupt_enable();
-  breathing = true;
-}
-
-void breathing_disable(void) {
-  breathing = false;
-  // backlight_set(get_backlight_level());
-  b_led_set(get_backlight_level()); // custom implementation of backlight_set()
-}
-
-void breathing_self_disable(void)
-{
-  if (get_backlight_level() == 0)
-    breathing_halt = BREATHING_HALT_OFF;
-  else
-    breathing_halt = BREATHING_HALT_ON;
-}
-
-void breathing_toggle(void) {
-  if (is_breathing())
-    breathing_disable();
-  else
-    breathing_enable();
-}
-
-void breathing_period_set(uint8_t value)
-{
-  if (!value)
-    value = 1;
-  breathing_period = value;
-}
-
-void breathing_period_default(void) {
-  breathing_period_set(BREATHING_PERIOD);
-}
-
-void breathing_period_inc(void)
-{
-  breathing_period_set(breathing_period+1);
-}
-
-void breathing_period_dec(void)
-{
-  breathing_period_set(breathing_period-1);
-}
-
-/* To generate breathing curve in python:
- * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
- */
-static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-
-// Use this before the cie_lightness function.
-static inline uint16_t scale_backlight(uint16_t v) {
-  return v / BACKLIGHT_LEVELS * get_backlight_level();
-}
-
-void custom_breathing_handler(void) {
-  uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
-  // resetting after one period to prevent ugly reset at overflow.
-  breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
-  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
-
-  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
-      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
-  {
-      // breathing_interrupt_disable();
-  }
-
-  setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
-}
-
-#endif // BACKLIGHT_BREATHING
-#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/ymd75/config.h b/keyboards/ymd75/config.h
index 00f6bd292..88916be62 100644
--- a/keyboards/ymd75/config.h
+++ b/keyboards/ymd75/config.h
@@ -17,8 +17,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -39,6 +38,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
 #define DIODE_DIRECTION COL2ROW
 
+#define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 12
 
 #define RGB_DI_PIN E2
@@ -49,5 +49,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_VAL_STEP 18
 
 #define NO_UART 1
-
-#endif
diff --git a/keyboards/ymd75/rules.mk b/keyboards/ymd75/rules.mk
index eb41e19cf..9d584b2b4 100644
--- a/keyboards/ymd75/rules.mk
+++ b/keyboards/ymd75/rules.mk
@@ -23,14 +23,8 @@ WS2812_DRIVER = i2c
 NKRO_ENABLE = no
 # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 
-
 DISABLE_WS2812 = no
 
 KEY_LOCK_ENABLE = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-
-#OPT_DEFS = -DDEBUG_LEVEL=0
-
-SRC = backlight.c
diff --git a/keyboards/ymd75/ymd75.c b/keyboards/ymd75/ymd75.c
index e32a745bf..1c5c38039 100644
--- a/keyboards/ymd75/ymd75.c
+++ b/keyboards/ymd75/ymd75.c
@@ -17,20 +17,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "ymd75.h"
 
-#include "backlight.h"
-#include "backlight_custom.h"
-
-#ifdef BACKLIGHT_ENABLE
-/// Overrides functions in `quantum.c`
-void backlight_init_ports(void) {
-    b_led_init_ports();
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
 }
 
-void backlight_task(void) {
-    b_led_task();
+void led_init_ports(void) {
+    setPinOutput(D1);
+    writePinHigh(D1);
 }
 
-void backlight_set(uint8_t level) {
-    b_led_set(level);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
+    }
+    return true;
 }
-#endif
diff --git a/keyboards/ymd96/backlight.c b/keyboards/ymd96/backlight.c
deleted file mode 100644
index f3f2b7a05..000000000
--- a/keyboards/ymd96/backlight.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#include "backlight.h"
-#include "quantum.h"
-
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-
-#include "backlight_custom.h"
-#include "breathing_custom.h"
-
-// DEBUG
-#include <stdlib.h>
-#include <stdio.h>
-
-// Port D: digital pins of the AVR chipset
-#define NUMLOCK_PORT    (1 << 0)  // 0th pin of Port D (digital)
-#define CAPSLOCK_PORT   (1 << 1)  // 1st pin
-#define BACKLIGHT_PORT  (1 << 4)  // D4
-//#define SCROLLLOCK_PORT (1 << 6)  // D6
-
-#define TIMER_CLK_DIV64			  0x03	///< Timer clocked at F_CPU/64
-#define TIMER1PRESCALE	TIMER_CLK_DIV64 ///< timer 1 prescaler default
-
-#define TIMER_PRESCALE_MASK		0x07	///< Timer Prescaler Bit-Mask
-
-#define PWM_MAX 0xFF
-#define TIMER_TOP 255 // 8 bit PWM
-
-extern backlight_config_t backlight_config;
-
-/**
- * References
- * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
- * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
- * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
- * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
- * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
- */
-
-// @Override
-// turn LEDs on and off depending on USB caps/num/scroll lock states.
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-      // turn on
-      DDRD  |= NUMLOCK_PORT;
-      PORTD |= NUMLOCK_PORT;
-    } else {
-      // turn off
-      DDRD  &= ~NUMLOCK_PORT;
-      PORTD &= ~NUMLOCK_PORT;
-    }
-
-    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-      DDRD  |= CAPSLOCK_PORT;
-      PORTD |= CAPSLOCK_PORT;
-    } else {
-      DDRD  &= ~CAPSLOCK_PORT;
-      PORTD &= ~CAPSLOCK_PORT;
-    }
-
-  /* YMD96 does not have scroll lock led  
-   if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-      DDRD  |= SCROLLLOCK_PORT;
-      PORTD |= SCROLLLOCK_PORT;
-    } else {
-      DDRD  &= ~SCROLLLOCK_PORT;
-      PORTD &= ~SCROLLLOCK_PORT;
-    }*/
-}
-
-#ifdef BACKLIGHT_ENABLE
-
-// sets up Timer 1 for 8-bit PWM
-void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
-  // default 8 bit mode
-  TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
-  TCCR1A |= (1 << 0);  // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
-
-  // clear output compare value A
-  // outb(OCR1AH, 0);
-  // outb(OCR1AL, 0);
-
-  // clear output comparator registers for B
-	OCR1BH = 0; // outb(OCR1BH, 0);
-	OCR1BL = 0; // outb(OCR1BL, 0);
-}
-
-bool is_init = false;
-void timer1Init(void) {
-  // timer1SetPrescaler(TIMER1PRESCALE)
-  // set to DIV/64
-  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
-
-  // reset TCNT1
-  TCNT1H = 0;  // outb(TCNT1H, 0);
-	TCNT1L = 0;  // outb(TCNT1L, 0);
-
-  // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
-	TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
-
-  is_init = true;
-}
-
-void timer1UnInit(void) {
-  // set prescaler back to NONE
-  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00;  // TIMERRTC_CLK_STOP
-
-  // disable timer overflow interrupt
-  TIMSK &= ~_BV(TOIE1); // overflow bit?
-
-  setPWM(0);
-
-  is_init = false;
-}
-
-
-// handle TCNT1 overflow
-//! Interrupt handler for tcnt1 overflow interrupt
-ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
-{
-	// sei();
-  // handle breathing here
-  #ifdef BACKLIGHT_BREATHING
-  if (is_breathing()) {
-    custom_breathing_handler();
-  }
-  #endif
-
-  // TODO call user defined function
-}
-
-// enable timer 1 PWM
-// timer1PWMBOn()
-void timer1PWMBEnable(void) {
-  // turn on channel B (OC1B) PWM output
-  // set OC1B as non-inverted PWM
-  TCCR1A |= _BV(COM1B1);
-  TCCR1A &= ~_BV(COM1B0);
-}
-
-// disable timer 1 PWM
-// timer1PWMBOff()
-void timer1PWMBDisable(void) {
-  TCCR1A &= ~_BV(COM1B1);
-  TCCR1A &= ~_BV(COM1B0);
-}
-
-void enableBacklight(void) {
-  DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
-  PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
-}
-
-void disableBacklight(void) {
-  // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
-  PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
-}
-
-void startPWM(void) {
-  timer1Init();
-  timer1PWMBEnable();
-  enableBacklight();
-}
-
-void stopPWM(void) {
-  timer1UnInit();
-  disableBacklight();
-  timer1PWMBDisable();
-}
-
-void b_led_init_ports(void) {
-  /* turn backlight on/off depending on user preference */
-  #if BACKLIGHT_ON_STATE == 0
-    // DDRx register: sets the direction of Port D
-    // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
-    PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
-  #else
-    DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
-    PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
-  #endif
-
-  timer1PWMSetup();
-  startPWM();
-
-  #ifdef BACKLIGHT_BREATHING
-  breathing_enable();
-  #endif
-}
-
-void b_led_set(uint8_t level) {
-  if (level > BACKLIGHT_LEVELS) {
-    level = BACKLIGHT_LEVELS;
-  }
-
-  setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
-}
-
-// called every matrix scan
-void b_led_task(void) {
-  // do nothing for now
-}
-
-void setPWM(uint16_t xValue) {
-  if (xValue > TIMER_TOP) {
-    xValue = TIMER_TOP;
-  }
-  OCR1B = xValue; // timer1PWMBSet(xValue);
-}
-
-#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/ymd96/backlight_custom.h b/keyboards/ymd96/backlight_custom.h
deleted file mode 100644
index 7210be840..000000000
--- a/keyboards/ymd96/backlight_custom.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#ifndef BACKLIGHT_CUSTOM_H
-#define BACKLIGHT_CUSTOM_H
-
-#include <avr/pgmspace.h>
-void b_led_init_ports(void);
-void b_led_set(uint8_t level);
-void b_led_task(void);
-void setPWM(uint16_t xValue);
-
-#endif  // BACKLIGHT_CUSTOM_H
diff --git a/keyboards/ymd96/breathing_custom.h b/keyboards/ymd96/breathing_custom.h
deleted file mode 100644
index 71416b1b4..000000000
--- a/keyboards/ymd96/breathing_custom.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/**
- * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
- * Works in conjunction with `backlight.c`.
- *
- * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
- * handler in `backlight.c` instead of setting up its own timer.
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#ifdef BACKLIGHT_ENABLE
-#ifdef BACKLIGHT_BREATHING
-
-#include "backlight_custom.h"
-
-#ifndef BREATHING_PERIOD
-#define BREATHING_PERIOD 6
-#endif
-
-#define breathing_min() do {breathing_counter = 0;} while (0)
-#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
-
-// TODO make this share code with quantum.c
-
-#define BREATHING_NO_HALT  0
-#define BREATHING_HALT_OFF 1
-#define BREATHING_HALT_ON  2
-#define BREATHING_STEPS 128
-
-static uint8_t breathing_period = BREATHING_PERIOD;
-static uint8_t breathing_halt = BREATHING_NO_HALT;
-static uint16_t breathing_counter = 0;
-
-static bool breathing = false;
-
-bool is_breathing(void) {
-  return breathing;
-}
-
-// See http://jared.geek.nz/2013/feb/linear-led-pwm
-static uint16_t cie_lightness(uint16_t v) {
-  if (v <= 5243) // if below 8% of max
-    return v / 9; // same as dividing by 900%
-  else {
-    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
-    // to get a useful result with integer division, we shift left in the expression above
-    // and revert what we've done again after squaring.
-    y = y * y * y >> 8;
-    if (y > 0xFFFFUL) // prevent overflow
-      return 0xFFFFU;
-    else
-      return (uint16_t) y;
-  }
-}
-
-void breathing_enable(void) {
-  breathing = true;
-  breathing_counter = 0;
-  breathing_halt = BREATHING_NO_HALT;
-  // interrupt already registered
-}
-
-void breathing_pulse(void) {
-  if (get_backlight_level() == 0)
-    breathing_min();
-  else
-    breathing_max();
-  breathing_halt = BREATHING_HALT_ON;
-  // breathing_interrupt_enable();
-  breathing = true;
-}
-
-void breathing_disable(void) {
-  breathing = false;
-  // backlight_set(get_backlight_level());
-  b_led_set(get_backlight_level()); // custom implementation of backlight_set()
-}
-
-void breathing_self_disable(void)
-{
-  if (get_backlight_level() == 0)
-    breathing_halt = BREATHING_HALT_OFF;
-  else
-    breathing_halt = BREATHING_HALT_ON;
-}
-
-void breathing_toggle(void) {
-  if (is_breathing())
-    breathing_disable();
-  else
-    breathing_enable();
-}
-
-void breathing_period_set(uint8_t value)
-{
-  if (!value)
-    value = 1;
-  breathing_period = value;
-}
-
-void breathing_period_default(void) {
-  breathing_period_set(BREATHING_PERIOD);
-}
-
-void breathing_period_inc(void)
-{
-  breathing_period_set(breathing_period+1);
-}
-
-void breathing_period_dec(void)
-{
-  breathing_period_set(breathing_period-1);
-}
-
-/* To generate breathing curve in python:
- * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
- */
-static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-
-// Use this before the cie_lightness function.
-static inline uint16_t scale_backlight(uint16_t v) {
-  return v / BACKLIGHT_LEVELS * get_backlight_level();
-}
-
-void custom_breathing_handler(void) {
-  uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
-  // resetting after one period to prevent ugly reset at overflow.
-  breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
-  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
-
-  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
-      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
-  {
-      // breathing_interrupt_disable();
-  }
-
-  setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
-}
-
-#endif // BACKLIGHT_BREATHING
-#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/ymd96/config.h b/keyboards/ymd96/config.h
index 1232f90c2..d761e6037 100644
--- a/keyboards/ymd96/config.h
+++ b/keyboards/ymd96/config.h
@@ -18,8 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #define VENDOR_ID       0x20A0
 #define PRODUCT_ID      0x422D
@@ -38,8 +37,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
+#define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 12
-// #define BACKLIGHT_BREATHING  // works, but BL_TOGG might not work
+#define BACKLIGHT_BREATHING
 
 #define TAPPING_TOGGLE 3
 
@@ -55,5 +55,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /*#define RGBLIGHT_VAL_STEP 20
 
 #define NO_UART 1*/
-
-#endif
diff --git a/keyboards/ymd96/rules.mk b/keyboards/ymd96/rules.mk
index 3c892daab..b7571649b 100644
--- a/keyboards/ymd96/rules.mk
+++ b/keyboards/ymd96/rules.mk
@@ -19,7 +19,6 @@ CONSOLE_ENABLE = no
 COMMAND_ENABLE = no
 
 BACKLIGHT_ENABLE = yes
-BACKLIGHT_CUSTOM_DRIVER = yes
 
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = i2c
@@ -30,5 +29,3 @@ KEY_LOCK_ENABLE = yes
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-SRC = backlight.c
diff --git a/keyboards/ymd96/ymd96.c b/keyboards/ymd96/ymd96.c
index eae84ade1..c81435e45 100644
--- a/keyboards/ymd96/ymd96.c
+++ b/keyboards/ymd96/ymd96.c
@@ -18,20 +18,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "ymd96.h"
 
-#include "backlight.h"
-#include "backlight_custom.h"
-
-#ifdef BACKLIGHT_ENABLE
-/// Overrides functions in `quantum.c`
-void backlight_init_ports(void) {
-  b_led_init_ports();
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
 }
 
-void backlight_task(void) {
-  b_led_task();
+void led_init_ports(void) {
+    setPinOutput(D0);
+    setPinOutput(D1);
+    writePinHigh(D0);
+    writePinHigh(D1);
 }
 
-void backlight_set(uint8_t level) {
-  b_led_set(level);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D0, !led_state.num_lock);
+        writePin(D1, !led_state.caps_lock);
+    }
+    return true;
 }
-#endif
diff --git a/keyboards/ymdk/bface/bface.c b/keyboards/ymdk/bface/bface.c
index 8622fd523..e2810409a 100644
--- a/keyboards/ymdk/bface/bface.c
+++ b/keyboards/ymdk/bface/bface.c
@@ -16,26 +16,19 @@
  */
 #include "quantum.h"
 
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
 
-void keyboard_pre_init_kb(void){
-    //init the CAPS LOCK LED pin as an output
+void led_init_ports(void) {
     setPinOutput(D1);
-    //init the Backlight Pin as an output
-    setPinOutput(D4);
-    //call any user initialization code
-    keyboard_pre_init_user();
+    writePinHigh(D1);
 }
 
-void led_set_kb(uint8_t usb_led){
-    //control the caps lock LED
-    if(IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)){
-        //set led pin to high
-        writePinHigh(D1);
-    } else {
-        //set to low
-        writePinLow(D1);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, !led_state.caps_lock);
     }
-    //call any user LED functions
-    led_set_user(usb_led);
+    return true;
 }
-
diff --git a/keyboards/ymdk/bface/config.h b/keyboards/ymdk/bface/config.h
index 2273b7e84..a8c8a2149 100644
--- a/keyboards/ymdk/bface/config.h
+++ b/keyboards/ymdk/bface/config.h
@@ -40,5 +40,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define BACKLIGHT_PIN       D4
 #define BACKLIGHT_LEVELS    6
-
-
diff --git a/keyboards/ymdk/bface/rules.mk b/keyboards/ymdk/bface/rules.mk
index f6f026cf3..6320071ab 100644
--- a/keyboards/ymdk/bface/rules.mk
+++ b/keyboards/ymdk/bface/rules.mk
@@ -18,9 +18,6 @@ EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
-BACKLIGHT_CUSTOM_DRIVER = no
-BACKLIGHT_BREATHING = no
 RGBLIGHT_ENABLE = no
-RGBLIGHT_CUSTOM_DRIVER = no
 
 OPT_DEFS = -DDEBUG_LEVEL=0
diff --git a/keyboards/ymdk_np21/backlight.c b/keyboards/ymdk_np21/backlight.c
deleted file mode 100644
index fbd241fa9..000000000
--- a/keyboards/ymdk_np21/backlight.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#include "backlight.h"
-#include "quantum.h"
-
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-
-#include "backlight_custom.h"
-#include "breathing_custom.h"
-
-// DEBUG
-#include <stdlib.h>
-#include <stdio.h>
-
-// Port D: digital pins of the AVR chipset
-#define NUMLOCK_PORT    (1 << 0)  // D0
-#define CAPSLOCK_PORT   (1 << 1)  // D1
-#define BACKLIGHT_PORT  (1 << 4)  // D4
-#define SCROLLLOCK_PORT (1 << 6)  // D6
-
-#define TIMER_CLK_DIV64			  0x03	///< Timer clocked at F_CPU/64
-#define TIMER1PRESCALE	TIMER_CLK_DIV64 ///< timer 1 prescaler default
-
-#define TIMER_PRESCALE_MASK		0x07	///< Timer Prescaler Bit-Mask
-
-#define PWM_MAX 0xFF
-#define TIMER_TOP 255 // 8 bit PWM
-
-extern backlight_config_t backlight_config;
-
-/**
- * References
- * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
- * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
- * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
- * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
- * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
- */
-
-// @Override
-// turn LEDs on and off depending on USB caps/num/scroll lock states.
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-      // turn on
-      DDRD  |= NUMLOCK_PORT;
-      PORTD |= NUMLOCK_PORT;
-    } else {
-      // turn off
-      DDRD  &= ~NUMLOCK_PORT;
-      PORTD &= ~NUMLOCK_PORT;
-    }
-
-    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-      DDRD  |= CAPSLOCK_PORT;
-      PORTD |= CAPSLOCK_PORT;
-    } else {
-      DDRD  &= ~CAPSLOCK_PORT;
-      PORTD &= ~CAPSLOCK_PORT;
-    }
-
-    if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-      DDRD  |= SCROLLLOCK_PORT;
-      PORTD |= SCROLLLOCK_PORT;
-    } else {
-      DDRD  &= ~SCROLLLOCK_PORT;
-      PORTD &= ~SCROLLLOCK_PORT;
-    }
-}
-
-#ifdef BACKLIGHT_ENABLE
-
-// sets up Timer 1 for 8-bit PWM
-void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
-  // default 8 bit mode
-  TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
-  TCCR1A |= (1 << 0);  // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
-
-  // clear output compare value A
-  // outb(OCR1AH, 0);
-  // outb(OCR1AL, 0);
-
-  // clear output comparator registers for B
-	OCR1BH = 0; // outb(OCR1BH, 0);
-	OCR1BL = 0; // outb(OCR1BL, 0);
-}
-
-bool is_init = false;
-void timer1Init(void) {
-  // timer1SetPrescaler(TIMER1PRESCALE)
-  // set to DIV/64
-  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
-
-  // reset TCNT1
-  TCNT1H = 0;  // outb(TCNT1H, 0);
-	TCNT1L = 0;  // outb(TCNT1L, 0);
-
-  // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
-	TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
-
-  is_init = true;
-}
-
-void timer1UnInit(void) {
-  // set prescaler back to NONE
-  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00;  // TIMERRTC_CLK_STOP
-
-  // disable timer overflow interrupt
-  TIMSK &= ~_BV(TOIE1); // overflow bit?
-
-  setPWM(0);
-
-  is_init = false;
-}
-
-
-// handle TCNT1 overflow
-//! Interrupt handler for tcnt1 overflow interrupt
-ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
-{
-	// sei();
-  // handle breathing here
-  #ifdef BACKLIGHT_BREATHING
-  if (is_breathing()) {
-    custom_breathing_handler();
-  }
-  #endif
-
-  // TODO call user defined function
-}
-
-// enable timer 1 PWM
-// timer1PWMBOn()
-void timer1PWMBEnable(void) {
-  // turn on channel B (OC1B) PWM output
-  // set OC1B as non-inverted PWM
-  TCCR1A |= _BV(COM1B1);
-  TCCR1A &= ~_BV(COM1B0);
-}
-
-// disable timer 1 PWM
-// timer1PWMBOff()
-void timer1PWMBDisable(void) {
-  TCCR1A &= ~_BV(COM1B1);
-  TCCR1A &= ~_BV(COM1B0);
-}
-
-void enableBacklight(void) {
-  DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
-  PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
-}
-
-void disableBacklight(void) {
-  // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
-  PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
-}
-
-void startPWM(void) {
-  timer1Init();
-  timer1PWMBEnable();
-  enableBacklight();
-}
-
-void stopPWM(void) {
-  timer1UnInit();
-  disableBacklight();
-  timer1PWMBDisable();
-}
-
-void b_led_init_ports(void) {
-  /* turn backlight on/off depending on user preference */
-  #if BACKLIGHT_ON_STATE == 0
-    // DDRx register: sets the direction of Port D
-    // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
-    PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
-  #else
-    DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
-    PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
-  #endif
-
-  timer1PWMSetup();
-  startPWM();
-
-  #ifdef BACKLIGHT_BREATHING
-  breathing_enable();
-  #endif
-}
-
-void b_led_set(uint8_t level) {
-  if (level > BACKLIGHT_LEVELS) {
-    level = BACKLIGHT_LEVELS;
-  }
-
-  setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
-}
-
-// called every matrix scan
-void b_led_task(void) {
-  // do nothing for now
-}
-
-void setPWM(uint16_t xValue) {
-  if (xValue > TIMER_TOP) {
-    xValue = TIMER_TOP;
-  }
-  OCR1B = xValue; // timer1PWMBSet(xValue);
-}
-
-#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/ymdk_np21/backlight_custom.h b/keyboards/ymdk_np21/backlight_custom.h
deleted file mode 100644
index 7210be840..000000000
--- a/keyboards/ymdk_np21/backlight_custom.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#ifndef BACKLIGHT_CUSTOM_H
-#define BACKLIGHT_CUSTOM_H
-
-#include <avr/pgmspace.h>
-void b_led_init_ports(void);
-void b_led_set(uint8_t level);
-void b_led_task(void);
-void setPWM(uint16_t xValue);
-
-#endif  // BACKLIGHT_CUSTOM_H
diff --git a/keyboards/ymdk_np21/breathing_custom.h b/keyboards/ymdk_np21/breathing_custom.h
deleted file mode 100644
index 71416b1b4..000000000
--- a/keyboards/ymdk_np21/breathing_custom.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/**
- * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
- * Works in conjunction with `backlight.c`.
- *
- * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
- * handler in `backlight.c` instead of setting up its own timer.
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#ifdef BACKLIGHT_ENABLE
-#ifdef BACKLIGHT_BREATHING
-
-#include "backlight_custom.h"
-
-#ifndef BREATHING_PERIOD
-#define BREATHING_PERIOD 6
-#endif
-
-#define breathing_min() do {breathing_counter = 0;} while (0)
-#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
-
-// TODO make this share code with quantum.c
-
-#define BREATHING_NO_HALT  0
-#define BREATHING_HALT_OFF 1
-#define BREATHING_HALT_ON  2
-#define BREATHING_STEPS 128
-
-static uint8_t breathing_period = BREATHING_PERIOD;
-static uint8_t breathing_halt = BREATHING_NO_HALT;
-static uint16_t breathing_counter = 0;
-
-static bool breathing = false;
-
-bool is_breathing(void) {
-  return breathing;
-}
-
-// See http://jared.geek.nz/2013/feb/linear-led-pwm
-static uint16_t cie_lightness(uint16_t v) {
-  if (v <= 5243) // if below 8% of max
-    return v / 9; // same as dividing by 900%
-  else {
-    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
-    // to get a useful result with integer division, we shift left in the expression above
-    // and revert what we've done again after squaring.
-    y = y * y * y >> 8;
-    if (y > 0xFFFFUL) // prevent overflow
-      return 0xFFFFU;
-    else
-      return (uint16_t) y;
-  }
-}
-
-void breathing_enable(void) {
-  breathing = true;
-  breathing_counter = 0;
-  breathing_halt = BREATHING_NO_HALT;
-  // interrupt already registered
-}
-
-void breathing_pulse(void) {
-  if (get_backlight_level() == 0)
-    breathing_min();
-  else
-    breathing_max();
-  breathing_halt = BREATHING_HALT_ON;
-  // breathing_interrupt_enable();
-  breathing = true;
-}
-
-void breathing_disable(void) {
-  breathing = false;
-  // backlight_set(get_backlight_level());
-  b_led_set(get_backlight_level()); // custom implementation of backlight_set()
-}
-
-void breathing_self_disable(void)
-{
-  if (get_backlight_level() == 0)
-    breathing_halt = BREATHING_HALT_OFF;
-  else
-    breathing_halt = BREATHING_HALT_ON;
-}
-
-void breathing_toggle(void) {
-  if (is_breathing())
-    breathing_disable();
-  else
-    breathing_enable();
-}
-
-void breathing_period_set(uint8_t value)
-{
-  if (!value)
-    value = 1;
-  breathing_period = value;
-}
-
-void breathing_period_default(void) {
-  breathing_period_set(BREATHING_PERIOD);
-}
-
-void breathing_period_inc(void)
-{
-  breathing_period_set(breathing_period+1);
-}
-
-void breathing_period_dec(void)
-{
-  breathing_period_set(breathing_period-1);
-}
-
-/* To generate breathing curve in python:
- * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
- */
-static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-
-// Use this before the cie_lightness function.
-static inline uint16_t scale_backlight(uint16_t v) {
-  return v / BACKLIGHT_LEVELS * get_backlight_level();
-}
-
-void custom_breathing_handler(void) {
-  uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
-  // resetting after one period to prevent ugly reset at overflow.
-  breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
-  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
-
-  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
-      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
-  {
-      // breathing_interrupt_disable();
-  }
-
-  setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
-}
-
-#endif // BACKLIGHT_BREATHING
-#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/ymdk_np21/config.h b/keyboards/ymdk_np21/config.h
index 60c527776..91478d903 100644
--- a/keyboards/ymdk_np21/config.h
+++ b/keyboards/ymdk_np21/config.h
@@ -15,10 +15,9 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "config_common.h"
+#pragma once
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#include "config_common.h"
 
 #define VENDOR_ID       0x20A0
 #define PRODUCT_ID      0x422D
@@ -37,8 +36,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
+#define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 12
-// #define BACKLIGHT_BREATHING  // works, but BL_TOGG might not work
+#define BACKLIGHT_BREATHING
 
 #define TAPPING_TOGGLE 3
 
@@ -52,5 +52,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 5
 #define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0.
 #define RGBLIGHT_ANIMATIONS
-
-#endif
diff --git a/keyboards/ymdk_np21/rules.mk b/keyboards/ymdk_np21/rules.mk
index 772bee928..237386bce 100644
--- a/keyboards/ymdk_np21/rules.mk
+++ b/keyboards/ymdk_np21/rules.mk
@@ -19,7 +19,6 @@ CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 
 BACKLIGHT_ENABLE = yes
-BACKLIGHT_CUSTOM_DRIVER = yes
 
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = i2c
@@ -30,5 +29,3 @@ KEY_LOCK_ENABLE = yes
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-SRC = backlight.c
diff --git a/keyboards/ymdk_np21/ymdk_np21.c b/keyboards/ymdk_np21/ymdk_np21.c
index f2b3d46da..5bf159758 100644
--- a/keyboards/ymdk_np21/ymdk_np21.c
+++ b/keyboards/ymdk_np21/ymdk_np21.c
@@ -18,20 +18,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "ymdk_np21.h"
 
-#include "backlight.h"
-#include "backlight_custom.h"
-
-#ifdef BACKLIGHT_ENABLE
-/// Overrides functions in `quantum.c`
-void backlight_init_ports(void) {
-  b_led_init_ports();
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
 }
 
-void backlight_task(void) {
-  b_led_task();
+void led_init_ports(void) {
+    setPinOutput(D0);
+    writePinHigh(D0);
 }
 
-void backlight_set(uint8_t level) {
-  b_led_set(level);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D0, !led_state.num_lock);
+    }
+    return true;
 }
-#endif