aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards
diff options
context:
space:
mode:
authorJoel Challis <git@zvecr.com>2020-01-10 01:31:01 +0000
committerGitHub <noreply@github.com>2020-01-10 01:31:01 +0000
commite34af631c2c4b0c9406dead907bf74b460ee9f7f (patch)
tree4e83a2d59c537cf62db418c1f16e15c8d18aca5e /keyboards
parent5a02cc00a43cbeb9cc6ad94811acfb861d8f3929 (diff)
downloadfirmware-e34af631c2c4b0c9406dead907bf74b460ee9f7f.tar.gz
firmware-e34af631c2c4b0c9406dead907bf74b460ee9f7f.tar.bz2
firmware-e34af631c2c4b0c9406dead907bf74b460ee9f7f.zip
Refactor f103,f072,f042 based keyboards to use new MCU selection defaults (#7705)
* refactor keyboards using ST_STM32F072B_DISCOVERY to use 'MCU = STM32F072' * refactor keyboards using GENERIC_STM32_F042X6 to use 'MCU = STM32F042' * refactor keyboards using GENERIC_STM32_F103 to use 'MCU = STM32F103'
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/at_at/660m/rules.mk38
-rw-r--r--keyboards/candybar/rules.mk36
-rw-r--r--keyboards/cannonkeys/an_c/rules.mk36
-rw-r--r--keyboards/cannonkeys/chimera65/rules.mk36
-rw-r--r--keyboards/cannonkeys/instant60/rules.mk38
-rw-r--r--keyboards/cannonkeys/iron165/rules.mk37
-rw-r--r--keyboards/cannonkeys/ortho48/rules.mk44
-rw-r--r--keyboards/cannonkeys/ortho60/rules.mk44
-rw-r--r--keyboards/cannonkeys/ortho75/rules.mk45
-rw-r--r--keyboards/cannonkeys/practice60/rules.mk44
-rw-r--r--keyboards/cannonkeys/practice65/rules.mk44
-rw-r--r--keyboards/cannonkeys/satisfaction75/rules.mk34
-rw-r--r--keyboards/cannonkeys/savage65/rules.mk37
-rw-r--r--keyboards/cannonkeys/tmov2/rules.mk45
-rw-r--r--keyboards/converter/siemens_tastatur/rules.mk40
-rw-r--r--keyboards/handwired/ck4x4/rules.mk36
-rw-r--r--keyboards/handwired/onekey/bluepill/rules.mk41
-rw-r--r--keyboards/handwired/onekey/stm32f0_disco/rules.mk36
-rw-r--r--keyboards/peiorisboards/ixora/rules.mk37
-rw-r--r--keyboards/projectkb/alice/rules.mk37
-rw-r--r--keyboards/retro_75/rules.mk36
-rw-r--r--keyboards/vinta/rules.mk38
22 files changed, 83 insertions, 776 deletions
diff --git a/keyboards/at_at/660m/rules.mk b/keyboards/at_at/660m/rules.mk
index 245cf23d5..b893d8031 100644
--- a/keyboards/at_at/660m/rules.mk
+++ b/keyboards/at_at/660m/rules.mk
@@ -1,39 +1,5 @@
-# project specific files
-# SRC = ssd1306.c
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p df11 -v 0483
+# MCU name
+MCU = STM32F072
# Build Options
# comment out to disable the options.
diff --git a/keyboards/candybar/rules.mk b/keyboards/candybar/rules.mk
index a0365a20b..0e1a8517f 100644
--- a/keyboards/candybar/rules.mk
+++ b/keyboards/candybar/rules.mk
@@ -1,37 +1,5 @@
-## chip/board settings
-# - the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-
-# Startup code to use
-# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-
-# Cortex version
-MCU = cortex-m0
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
+# MCU name
+MCU = STM32F072
# Build Options
# comment out to disable the options.
diff --git a/keyboards/cannonkeys/an_c/rules.mk b/keyboards/cannonkeys/an_c/rules.mk
index f99075d81..151f72fd0 100644
--- a/keyboards/cannonkeys/an_c/rules.mk
+++ b/keyboards/cannonkeys/an_c/rules.mk
@@ -1,35 +1,5 @@
-# project specific files
-# SRC = ssd1306.c
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+# MCU name
+MCU = STM32F072
# Build Options
# comment out to disable the options.
@@ -40,8 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
SRC = keyboard.c \
led.c
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
diff --git a/keyboards/cannonkeys/chimera65/rules.mk b/keyboards/cannonkeys/chimera65/rules.mk
index cd6734a31..1e300a99c 100644
--- a/keyboards/cannonkeys/chimera65/rules.mk
+++ b/keyboards/cannonkeys/chimera65/rules.mk
@@ -1,35 +1,5 @@
-# project specific files
-# SRC = ssd1306.c
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+# MCU name
+MCU = STM32F072
# Build Options
# comment out to disable the options.
@@ -40,8 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
SRC = keyboard.c \
led.c
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
diff --git a/keyboards/cannonkeys/instant60/rules.mk b/keyboards/cannonkeys/instant60/rules.mk
index d1dd3b289..db753884d 100644
--- a/keyboards/cannonkeys/instant60/rules.mk
+++ b/keyboards/cannonkeys/instant60/rules.mk
@@ -1,39 +1,5 @@
-# project specific files
-# SRC = ssd1306.c
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
+# MCU name
+MCU = STM32F072
# Build Options
# comment out to disable the options.
diff --git a/keyboards/cannonkeys/iron165/rules.mk b/keyboards/cannonkeys/iron165/rules.mk
index 5480987a3..edc84edd5 100644
--- a/keyboards/cannonkeys/iron165/rules.mk
+++ b/keyboards/cannonkeys/iron165/rules.mk
@@ -1,35 +1,5 @@
-# project specific files
-# SRC = ssd1306.c
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+# MCU name
+MCU = STM32F072
# Build Options
# comment out to disable the options.
@@ -40,9 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
SRC = keyboard.c \
led.c
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -v 0483 -p DF11
-
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
diff --git a/keyboards/cannonkeys/ortho48/rules.mk b/keyboards/cannonkeys/ortho48/rules.mk
index 2e483a8c2..4bca8fde0 100644
--- a/keyboards/cannonkeys/ortho48/rules.mk
+++ b/keyboards/cannonkeys/ortho48/rules.mk
@@ -1,46 +1,18 @@
-# project specific files
-VPATH += keyboards/cannonkeys/bluepill
-SRC = led.c \
- keyboard.c
+# MCU name
+MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = GENERIC_STM32_F103
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+DFU_ARGS = -d 1eaf:0003 -a2 -R
+DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC = led.c \
+ keyboard.c
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
diff --git a/keyboards/cannonkeys/ortho60/rules.mk b/keyboards/cannonkeys/ortho60/rules.mk
index 359f447a9..d2fa535f4 100644
--- a/keyboards/cannonkeys/ortho60/rules.mk
+++ b/keyboards/cannonkeys/ortho60/rules.mk
@@ -1,46 +1,18 @@
-# project specific files
-VPATH += keyboards/cannonkeys/bluepill
-SRC = led.c \
- keyboard.c
+# MCU name
+MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = GENERIC_STM32_F103
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+DFU_ARGS = -d 1eaf:0003 -a2 -R
+DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC = led.c \
+ keyboard.c
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
diff --git a/keyboards/cannonkeys/ortho75/rules.mk b/keyboards/cannonkeys/ortho75/rules.mk
index 113fff555..5b90e87fd 100644
--- a/keyboards/cannonkeys/ortho75/rules.mk
+++ b/keyboards/cannonkeys/ortho75/rules.mk
@@ -1,47 +1,18 @@
-# project specific files
-VPATH += keyboards/cannonkeys/bluepill
-SRC = led.c \
- keyboard.c
+# MCU name
+MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = GENERIC_STM32_F103
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+DFU_ARGS = -d 1eaf:0003 -a2 -R
+DFU_SUFFIX_ARGS = -v 1eaf -p 0003
-DFU_ARGS = -d 1eaf:0003 -a 2 -R
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC = led.c \
+ keyboard.c
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
diff --git a/keyboards/cannonkeys/practice60/rules.mk b/keyboards/cannonkeys/practice60/rules.mk
index cf8554c0c..7c3fec31e 100644
--- a/keyboards/cannonkeys/practice60/rules.mk
+++ b/keyboards/cannonkeys/practice60/rules.mk
@@ -1,46 +1,18 @@
-# project specific files
-VPATH += keyboards/cannonkeys/bluepill
-SRC = led.c \
- keyboard.c
+# MCU name
+MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = GENERIC_STM32_F103
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+DFU_ARGS = -d 1eaf:0003 -a2 -R
+DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC = led.c \
+ keyboard.c
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
diff --git a/keyboards/cannonkeys/practice65/rules.mk b/keyboards/cannonkeys/practice65/rules.mk
index 8bbc910aa..b43e591ae 100644
--- a/keyboards/cannonkeys/practice65/rules.mk
+++ b/keyboards/cannonkeys/practice65/rules.mk
@@ -1,46 +1,18 @@
-# project specific files
-VPATH += keyboards/cannonkeys/bluepill
-SRC = led.c \
- keyboard.c
+# MCU name
+MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = GENERIC_STM32_F103
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+DFU_ARGS = -d 1eaf:0003 -a2 -R
+DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC = led.c \
+ keyboard.c
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
diff --git a/keyboards/cannonkeys/satisfaction75/rules.mk b/keyboards/cannonkeys/satisfaction75/rules.mk
index e81448d62..7e0b15b92 100644
--- a/keyboards/cannonkeys/satisfaction75/rules.mk
+++ b/keyboards/cannonkeys/satisfaction75/rules.mk
@@ -1,35 +1,5 @@
-# project specific files
-# SRC = ssd1306.c
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+# MCU name
+MCU = STM32F072
# Build Options
# comment out to disable the options.
diff --git a/keyboards/cannonkeys/savage65/rules.mk b/keyboards/cannonkeys/savage65/rules.mk
index c6789d6c3..199dd1078 100644
--- a/keyboards/cannonkeys/savage65/rules.mk
+++ b/keyboards/cannonkeys/savage65/rules.mk
@@ -1,35 +1,5 @@
-# project specific files
-# SRC = ssd1306.c
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+# MCU name
+MCU = STM32F072
# Build Options
# comment out to disable the options.
@@ -40,9 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
SRC = keyboard.c \
led.c
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -v 0483 -p DF11
-
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
diff --git a/keyboards/cannonkeys/tmov2/rules.mk b/keyboards/cannonkeys/tmov2/rules.mk
index 828fa8ff8..e6f0ce30a 100644
--- a/keyboards/cannonkeys/tmov2/rules.mk
+++ b/keyboards/cannonkeys/tmov2/rules.mk
@@ -1,43 +1,5 @@
-# project specific files
-# SRC = ssd1306.c
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-# Build Options
-# comment out to disable the options.
-#
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
+# MCU name
+MCU = STM32F072
# Build Options
# comment out to disable the options.
@@ -48,9 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
SRC = keyboard.c \
led.c
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -v 0483 -p DF11
-
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
diff --git a/keyboards/converter/siemens_tastatur/rules.mk b/keyboards/converter/siemens_tastatur/rules.mk
index 75b3d7b36..d89f7f5f6 100644
--- a/keyboards/converter/siemens_tastatur/rules.mk
+++ b/keyboards/converter/siemens_tastatur/rules.mk
@@ -1,43 +1,15 @@
-SRC = matrix.c
+# MCU name
+MCU = STM32F103
+
# GENERIC STM32F103C8T6 board - stm32duino bootloader
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = GENERIC_STM32_F103
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
+DFU_ARGS = -d 1eaf:0003 -a2 -R
+DFU_SUFFIX_ARGS = -v 1eaf -p 0003
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-DFU_ARGS = -d 1eaf:0003 -a 2
+SRC = matrix.c
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
diff --git a/keyboards/handwired/ck4x4/rules.mk b/keyboards/handwired/ck4x4/rules.mk
index 7ed9022e6..cd4bc260f 100644
--- a/keyboards/handwired/ck4x4/rules.mk
+++ b/keyboards/handwired/ck4x4/rules.mk
@@ -1,37 +1,5 @@
-# project specific files
-# SRC = matrix.c \
-# led.c
-
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+# MCU name
+MCU = STM32F072
# Build Options
# comment out to disable the options.
diff --git a/keyboards/handwired/onekey/bluepill/rules.mk b/keyboards/handwired/onekey/bluepill/rules.mk
index aeda2782b..69436650b 100644
--- a/keyboards/handwired/onekey/bluepill/rules.mk
+++ b/keyboards/handwired/onekey/bluepill/rules.mk
@@ -1,41 +1,10 @@
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-BOARD = GENERIC_STM32_F103
+# MCU name
+MCU = STM32F103
+# GENERIC STM32F103C8T6 board - stm32duino bootloader
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
+BOARD = GENERIC_STM32_F103
DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS ?= -v 1eaf -p 0003
-
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+DFU_SUFFIX_ARGS = -v 1eaf -p 0003
diff --git a/keyboards/handwired/onekey/stm32f0_disco/rules.mk b/keyboards/handwired/onekey/stm32f0_disco/rules.mk
index 69639f940..fe5e3f824 100644
--- a/keyboards/handwired/onekey/stm32f0_disco/rules.mk
+++ b/keyboards/handwired/onekey/stm32f0_disco/rules.mk
@@ -1,34 +1,2 @@
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p df11 -v 0483
+# MCU name
+MCU = STM32F072
diff --git a/keyboards/peiorisboards/ixora/rules.mk b/keyboards/peiorisboards/ixora/rules.mk
index 9d89d9663..0cea106d0 100644
--- a/keyboards/peiorisboards/ixora/rules.mk
+++ b/keyboards/peiorisboards/ixora/rules.mk
@@ -1,38 +1,5 @@
-# project specific files
-
-## chip/board settings
-# - the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F042x6
-
-# Startup code to use
-# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = GENERIC_STM32_F042X6
-
-# Cortex version
-MCU = cortex-m0
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+# MCU name
+MCU = STM32F042
# Build Options
# comment out to disable the options.
diff --git a/keyboards/projectkb/alice/rules.mk b/keyboards/projectkb/alice/rules.mk
index 928878335..96904aef3 100644
--- a/keyboards/projectkb/alice/rules.mk
+++ b/keyboards/projectkb/alice/rules.mk
@@ -1,35 +1,5 @@
-# project specific files
-# SRC = ssd1306.c
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+# MCU name
+MCU = STM32F072
# Build Options
# comment out to disable the options.
@@ -51,4 +21,5 @@ CUSTOM_MATRIX = no # Custom matrix file
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
RGBLIGHT_ENABLE = yes
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+# RAW_ENABLE = yes
+# DYNAMIC_KEYMAP_ENABLE = yes
diff --git a/keyboards/retro_75/rules.mk b/keyboards/retro_75/rules.mk
index 82a2cfb06..d3ead7f64 100644
--- a/keyboards/retro_75/rules.mk
+++ b/keyboards/retro_75/rules.mk
@@ -1,37 +1,5 @@
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p df11 -v 0483
+# MCU name
+MCU = STM32F072
# Build Options
# change yes to no to disable
diff --git a/keyboards/vinta/rules.mk b/keyboards/vinta/rules.mk
index 90485c435..6d9fc0da1 100644
--- a/keyboards/vinta/rules.mk
+++ b/keyboards/vinta/rules.mk
@@ -1,39 +1,5 @@
-# project specific files
-
-## chip/board settings
-# - the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F042x6
-
-# Startup code to use
-# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = GENERIC_STM32_F042X6
-
-# Cortex version
-MCU = cortex-m0
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
+# MCU name
+MCU = STM32F042
# Build Options
# comment out to disable the options.