[Keyboard] adding Rewind keyboard (#9497)

* adding rewind

* keymap cleanup

* keymap cleanup

* improve keymap

* improved keymap

* reduntant

* deletions

* typos

* readme img size and default bootloader

8 files changed, 311 insertions, 0 deletions

diff --git a/keyboards/montsinger/rewind/config.h b/keyboards/montsinger/rewind/config.h
new file mode 100644
index 000000000..f27622212
--- /dev/null
+++ b/keyboards/montsinger/rewind/config.h
@@ -0,0 +1,62 @@
+/*
+Copyright 2020 Ross Montsinger
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x552F
+#define DEVICE_VER 0x0002
+#define MANUFACTURER Montsinger
+#define PRODUCT Rewind
+#define DESCRIPTION "5x10 ortho that fits inside a puffy VHS case"
+
+/* key matrix size */
+
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 10
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on
+diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+
+#define MATRIX_ROW_PINS { B5, B4, D2, D3, B2 }
+#define MATRIX_COL_PINS { F6, F7, B1, B3, E6, D7, C6, D4, D0, D1 }
+#define UNUSED_PINS { F4, F5, B6 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION ROW2COL
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
\ No newline at end of file
diff --git a/keyboards/montsinger/rewind/info.json b/keyboards/montsinger/rewind/info.json
new file mode 100644
index 000000000..315670994
--- /dev/null
+++ b/keyboards/montsinger/rewind/info.json
@@ -0,0 +1,68 @@
+ {
+    "keyboard":"montsinger/rewind",
+    "url": "https://montsinger.net",
+    "maintainer": "rossman360",
+    "width": 10,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_ortho_5x10": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+                {"x":4, "y":1},
+                {"x":5, "y":1},
+                {"x":6, "y":1},
+                {"x":7, "y":1},
+                {"x":8, "y":1},
+                {"x":9, "y":1},
+
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":3, "y":2},
+                {"x":4, "y":2},
+                {"x":5, "y":2},
+                {"x":6, "y":2},
+                {"x":7, "y":2},
+                {"x":8, "y":2},
+                {"x":9, "y":2},
+
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3},
+                {"x":4, "y":3},
+                {"x":5, "y":3},
+                {"x":6, "y":3},
+                {"x":7, "y":3},
+                {"x":8, "y":3},
+                {"x":9, "y":3},
+
+                {"x":0, "y":4},
+                {"x":1, "y":4},
+                {"x":2, "y":4},
+                {"x":3, "y":4},
+                {"x":4, "y":4},
+                {"x":5, "y":4},
+                {"x":6, "y":4},
+                {"x":7, "y":4},
+                {"x":8, "y":4},
+                {"x":9, "y":4}
+            ]
+        }
+    }
+}
+
diff --git a/keyboards/montsinger/rewind/keymaps/default/keymap.c b/keyboards/montsinger/rewind/keymaps/default/keymap.c
new file mode 100644
index 000000000..861c04faf
--- /dev/null
+++ b/keyboards/montsinger/rewind/keymaps/default/keymap.c
@@ -0,0 +1,40 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum layer_names
+{
+  _QWERTY,
+  _FN1,
+  _SYM
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QWERTY] = LAYOUT_ortho_5x10(
+   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
+   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
+   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_QUOT,
+   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,
+   KC_LCTL, KC_LALT, KC_LGUI, KC_LSFT, MO(_SYM),KC_ENTER,KC_SPC,  MO(_FN1),KC_BSPC, KC_DEL
+),
+
+[_FN1] = LAYOUT_ortho_5x10(
+   KC_ESC,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_LEFT, KC_UP,   KC_RIGHT,KC_END,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_DOWN, XXXXXXX, XXXXXXX,
+   RESET,   XXXXXXX, XXXXXXX, _______, KC_BSPC, KC_DEL,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+),
+
+[_SYM] = LAYOUT_ortho_5x10(
+   KC_ESC,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MINS, KC_PLUS,
+   KC_TAB,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+   KC_CAPS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SCLN,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BSLS,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+),
+};
diff --git a/keyboards/montsinger/rewind/keymaps/rossman360/keymap.c b/keyboards/montsinger/rewind/keymaps/rossman360/keymap.c
new file mode 100644
index 000000000..152a30523
--- /dev/null
+++ b/keyboards/montsinger/rewind/keymaps/rossman360/keymap.c
@@ -0,0 +1,56 @@
+#include QMK_KEYBOARD_H
+#include "rossman360.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum layer_names {
+  _BASE,
+  _DEL,
+  _FN1,
+  _FN2,
+  _NUM,
+};
+
+#define PGMOD LT(_NUM, KC_PGDN)
+#define SPCMOD LT(_FN1, KC_SPACE)
+#define ZSHIFT MT(MOD_LSFT, KC_Z)
+#define TABMOD LT(_FN1, KC_TAB)
+#define ESCMOD LT(_FN1, KC_1)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_BASE] = LAYOUT_ortho_5x10(
+   ESCMOD,  KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
+   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
+   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_QUOT,
+   ZSHIFT,  KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,
+   KC_BSPC, ALTDEL,  KC_LCTRL,TABMOD,  PGMOD ,  KC_ENTER,SPCMOD, MO(_DEL), KC_BSPC, KC_DEL
+),
+
+[_FN1] = LAYOUT_ortho_5x10(
+   XXXXXXX, KC_ESC,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+   JUMPBACK,XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_LEFT, KC_UP,   KC_RIGHT,KC_END,
+   _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, PMERGE,  KC_DOWN, XXXXXXX, XXXXXXX,
+   XXXXXXX, XXXXXXX, XXXXXXX, LWORD,   RWORD,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+),
+
+[_DEL] = LAYOUT_ortho_5x10(
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+   REMCAPS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+   XXXXXXX, XXXXXXX, BLINE  , KC_BSPC, BWORD  , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+),
+
+[_NUM] = LAYOUT_ortho_5x10(
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, NTAB,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_7,    KC_8,    KC_9,    CTAB,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_4,    KC_5,    KC_6,    KC_SCLN,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_1,    KC_2,    KC_3,    KC_MINS,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_0,    XXXXXXX, XXXXXXX
+),
+};
diff --git a/keyboards/montsinger/rewind/readme.md b/keyboards/montsinger/rewind/readme.md
new file mode 100755
index 000000000..d0f4a6fe7
--- /dev/null
+++ b/keyboards/montsinger/rewind/readme.md
@@ -0,0 +1,15 @@
+# Rewind
+
+[Rewind](https://i.imgur.com/3QZbLr0l.jpg)
+
+A 5x10 ortholinear keyboard that fits inside puffy VHS cases, made and sold by Montsinger. [More info on Montsinger.net](https://montsinger.net).
+
+* Keyboard Maintainer: [Rossman360](https://github.com/rossman360)
+* Hardware Supported: Rewind; Pro Micro or Elite-C
+* Hardware Availability: [Montsinger.net](https://montsinger.net)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make montsinger/rewind:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs)
diff --git a/keyboards/montsinger/rewind/rewind.c b/keyboards/montsinger/rewind/rewind.c
new file mode 100644
index 000000000..6796ef8d2
--- /dev/null
+++ b/keyboards/montsinger/rewind/rewind.c
@@ -0,0 +1 @@
+#include "rewind.h"
diff --git a/keyboards/montsinger/rewind/rewind.h b/keyboards/montsinger/rewind/rewind.h
new file mode 100644
index 000000000..3019c7c03
--- /dev/null
+++ b/keyboards/montsinger/rewind/rewind.h
@@ -0,0 +1,41 @@
+/* Copyright 2020 Ross Montsinger
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ * The first section contains all of the arguments representing the
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_ortho_5x10( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39,\
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49\
+    ) { \
+  { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \
+  { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \
+  { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \
+  { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39 }, \
+  { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49 } \
+}
+
diff --git a/keyboards/montsinger/rewind/rules.mk b/keyboards/montsinger/rewind/rules.mk
new file mode 100644
index 000000000..a59793d6b
--- /dev/null
+++ b/keyboards/montsinger/rewind/rules.mk
@@ -0,0 +1,28 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches