[Keyboard] add initial ergoslab directory (#7730)

* feat: add initial ergoslab directory

* fix: address all comments from noroadsleft

* fix: address comment from drashna

* feat: add swap hands config to ergoslab

* chore: change ergoslab image to real photo

* re

11 files changed, 385 insertions, 0 deletions

diff --git a/keyboards/ergoslab/config.h b/keyboards/ergoslab/config.h
new file mode 100644
index 000000000..590b63c9d
--- /dev/null
+++ b/keyboards/ergoslab/config.h
@@ -0,0 +1,28 @@
+/*
+Copyright 2019 Tom Saleeba <ergoslab@techotom.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define MOUSEKEY_INTERVAL           16
+#define MOUSEKEY_DELAY              0
+#define MOUSEKEY_TIME_TO_MAX        40
+#define MOUSEKEY_MAX_SPEED          7
+#define MOUSEKEY_WHEEL_MAX_SPEED    4
+#define MOUSEKEY_WHEEL_TIME_TO_MAX  255
+#define MOUSEKEY_WHEEL_DELAY        0
diff --git a/keyboards/ergoslab/ergoslab.c b/keyboards/ergoslab/ergoslab.c
new file mode 100644
index 000000000..6f2796c07
--- /dev/null
+++ b/keyboards/ergoslab/ergoslab.c
@@ -0,0 +1 @@
+#include "ergoslab.h"
diff --git a/keyboards/ergoslab/ergoslab.h b/keyboards/ergoslab/ergoslab.h
new file mode 100644
index 000000000..8b0249054
--- /dev/null
+++ b/keyboards/ergoslab/ergoslab.h
@@ -0,0 +1,7 @@
+#pragma once
+
+#ifdef KEYBOARD_ergoslab_rev1
+    #include "rev1.h"
+#endif
+
+#include "quantum.h"
diff --git a/keyboards/ergoslab/info.json b/keyboards/ergoslab/info.json
new file mode 100644
index 000000000..e24f0f1fc
--- /dev/null
+++ b/keyboards/ergoslab/info.json
@@ -0,0 +1,66 @@
+{
+  "keyboard_name": "ergoslab",
+  "url": "https://github.com/tomsaleeba/ergoslab",
+  "maintainer": "tomsaleeba",
+  "width": 13,
+  "height": 5.25,
+  "layouts": {
+    "LAYOUT_ergoslab": {
+      "key_count": 52,
+      "layout": [
+        {"label":"Q", "x":0, "y":0.625},
+        {"label":"W", "x":1, "y":0.125},
+        {"label":"E", "x":2, "y":0},
+        {"label":"R", "x":3, "y":0.125},
+        {"label":"T", "x":4, "y":0.25},
+        {"label":"Y", "x":8, "y":0.25},
+        {"label":"U", "x":9, "y":0.125},
+        {"label":"I", "x":10, "y":0},
+        {"label":"O", "x":11, "y":0.125},
+        {"label":"P", "x":12, "y":0.625},
+        {"label":"A", "x":0, "y":1.625},
+        {"label":"S", "x":1, "y":1.125},
+        {"label":"D", "x":2, "y":1},
+        {"label":"F", "x":3, "y":1.125},
+        {"label":"G", "x":4, "y":1.25},
+        {"label":"H", "x":8, "y":1.25},
+        {"label":"J", "x":9, "y":1.125},
+        {"label":"K", "x":10, "y":1},
+        {"label":"L", "x":11, "y":1.125},
+        {"label":";", "x":12, "y":1.625},
+        {"label":"Z", "x":0, "y":2.625},
+        {"label":"X", "x":1, "y":2.125},
+        {"label":"C", "x":2, "y":2},
+        {"label":"V", "x":3, "y":2.125},
+        {"label":"B", "x":4, "y":2.25},
+        {"label":"N", "x":8, "y":2.25},
+        {"label":"M", "x":9, "y":2.125},
+        {"label":",", "x":10, "y":2},
+        {"label":".", "x":11, "y":2.125},
+        {"label":"/", "x":12, "y":2.625},
+        {"label":"'", "x":0, "y":3.625},
+        {"label":"Alt", "x":1, "y":3.125},
+        {"label":"Del", "x":2, "y":3},
+        {"label":"Enter", "x":3, "y":3.125},
+        {"label":"Shift", "x":4, "y":3.25},
+        {"label":"Ctrl", "x":5, "y":3.25},
+        {"label":"Numb", "x":7, "y":3.25},
+        {"label":"Space", "x":8, "y":3.25},
+        {"label":"Left", "x":9, "y":3.125},
+        {"label":"Down", "x":10, "y":3},
+        {"label":"Up", "x":11, "y":3.125},
+        {"label":"Right", "x":12, "y":3.625},
+        {"label":"[", "x":1, "y":4.25},
+        {"label":"(", "x":2, "y":4.25},
+        {"label":"Esc", "x":3, "y":4.25},
+        {"label":"Media", "x":4, "y":4.25},
+        {"label":"GUI", "x":5, "y":4.25},
+        {"label":"Tab", "x":7, "y":4.25},
+        {"label":"Mouse", "x":8, "y":4.25},
+        {"label":"Bspc", "x":9, "y":4.25},
+        {"label":")", "x":10, "y":4.25},
+        {"label":"]", "x":11, "y":4.25}
+      ]
+    }
+  }
+}
diff --git a/keyboards/ergoslab/keymaps/default/config.h b/keyboards/ergoslab/keymaps/default/config.h
new file mode 100644
index 000000000..2c47a7440
--- /dev/null
+++ b/keyboards/ergoslab/keymaps/default/config.h
@@ -0,0 +1,29 @@
+/*
+Copyright 2019 Tom Saleeba <ergoslab@techotom.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+// #define MASTER_LEFT
+#define MASTER_RIGHT
+// #define EE_HANDS
diff --git a/keyboards/ergoslab/keymaps/default/keymap.c b/keyboards/ergoslab/keymaps/default/keymap.c
new file mode 100644
index 000000000..a9bf27924
--- /dev/null
+++ b/keyboards/ergoslab/keymaps/default/keymap.c
@@ -0,0 +1,73 @@
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    BASE,
+    MDIA,
+    NUMB,
+    MOUS
+};
+
+#ifdef RGBLIGHT_ENABLE
+#define ERGOSLAB_BRIGHTNESS 112
+#define HSV_ERGOSLAB_ORANGE 28, 255, 16
+#define HSV_ERGOSLAB_RED 0, 255, ERGOSLAB_BRIGHTNESS
+#define HSV_ERGOSLAB_GREEN 85, 255, ERGOSLAB_BRIGHTNESS
+#define HSV_ERGOSLAB_CYAN 128, 255, ERGOSLAB_BRIGHTNESS
+#endif
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [BASE] = LAYOUT_ergoslab(
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                           KC_Y,     KC_U,     KC_I,     KC_O,    KC_P,
+    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                           KC_H,     KC_J,     KC_K,     KC_L,    KC_SCLN,
+    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                           KC_N,     KC_M,     KC_COMM,  KC_DOT,  KC_SLSH,
+    KC_QUOT, KC_LALT, KC_DEL,  KC_ENT,  KC_LSFT, KC_LCTL,     MO(NUMB), KC_SPC,   KC_LEFT,  KC_DOWN,  KC_UP,   KC_RGHT,
+             KC_LBRC, KC_LPRN, KC_ESC,  MO(MDIA),KC_RGUI,     KC_TAB,   TG(MOUS), KC_BSPC,  KC_RPRN,  KC_RBRC
+  ),
+
+  [MDIA] = LAYOUT_ergoslab(
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                          KC_F6,    KC_F7,    KC_F8,    KC_F9,   KC_F10,
+    _______, _______, _______, _______, KC_F11,                         KC_F12,   KC_HOME,  KC_PGDN,  KC_PGUP, KC_END,
+    _______, _______, _______, _______, _______,                        RGB_TOG,  _______,  _______,  _______, KC_MUTE,
+    _______, RESET,   _______, _______, _______, _______,     _______,  _______,  _______,  KC_VOLD,  KC_VOLU, _______,
+             _______, _______, _______, _______, _______,     _______,  _______,  _______,  _______,  _______
+  ),
+
+  [NUMB] = LAYOUT_ergoslab(
+    KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                        KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_BSLS, KC_PIPE,
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                           KC_6,     KC_7,     KC_8,     KC_9,    KC_0,
+    KC_UNDS, KC_MINS, KC_PLUS, KC_EQL,  KC_GRV,                         KC_COLN,  KC_TILD,  _______,  _______, _______,
+    _______, _______, _______, _______, _______, _______,     _______,  _______,  KC_QUOT,  KC_DQT,   _______, _______,
+             _______, _______, _______, _______, _______,     _______,  _______,  _______,  _______,  _______
+  ),
+
+  [MOUS] = LAYOUT_ergoslab(
+    _______, _______, KC_MS_U, _______, _______,                        _______,  _______,  KC_WH_U,  _______, _______,
+    _______, KC_MS_L, KC_MS_D, KC_MS_R, _______,                        _______,  KC_BTN3,  KC_WH_D,  _______, _______,
+    _______, _______, _______, _______, _______,                        _______,  _______,  _______,  _______, _______,
+    _______, _______, _______, _______, KC_ACL0,  _______,     KC_BTN2, KC_BTN1,  _______,  _______,  _______, _______,
+             _______, _______, _______, _______,  _______,     _______, _______,  _______,  _______,  _______
+  ),
+};
+
+#ifdef RGBLIGHT_ENABLE
+layer_state_t layer_state_set_user(layer_state_t state) {
+  uint8_t layer = biton32(state);
+  switch (layer) {
+      case BASE:
+          rgblight_sethsv(HSV_ERGOSLAB_ORANGE);
+        break;
+      case MDIA:
+          rgblight_sethsv(HSV_ERGOSLAB_RED);
+        break;
+      case NUMB:
+          rgblight_sethsv(HSV_ERGOSLAB_GREEN);
+        break;
+      case MOUS:
+          rgblight_sethsv(HSV_ERGOSLAB_CYAN);
+        break;
+      default:
+        break;
+    }
+  return state;
+};
+#endif
diff --git a/keyboards/ergoslab/readme.md b/keyboards/ergoslab/readme.md
new file mode 100644
index 000000000..9343f3bc9
--- /dev/null
+++ b/keyboards/ergoslab/readme.md
@@ -0,0 +1,33 @@
+# ergoslab
+
+![ergoslab](https://raw.githubusercontent.com/tomsaleeba/ergoslab/master/ergoslab.jpg)
+
+
+A split ergo 5x6 keyboard with hotswap sockets and a heap of thumb keys designed
+by Tom Saleeba. [More info on the GitHub
+Repo](https://github.com/tomsaleeba/ergoslab).
+
+**Status** The ergoslab is currently being beta-tested.
+
+* Keyboard Maintainer: [Tom Saleeba](https://github.com/tomsaleeba)
+* Hardware Supported: Pro Micro (ATmega32U4)
+* Hardware Availability: gerbers are available from the [releases page on the
+GitHub repo](https://github.com/tomsaleeba/ergoslab/releases). Get them
+manufactured at your favourite PCB house. I used JLCPCB.
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ergoslab:default
+
+Example of flashing this keyboard:
+
+    make ergoslab:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)
+and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide)
+for more information. Brand new to QMK? Start with our
+[Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+A build guide for this keyboard can be found here: [Build
+Guide](https://github.com/tomsaleeba/ergoslab/blob/master/build-guide.md)
diff --git a/keyboards/ergoslab/rev1/config.h b/keyboards/ergoslab/rev1/config.h
new file mode 100644
index 000000000..4e69b1095
--- /dev/null
+++ b/keyboards/ergoslab/rev1/config.h
@@ -0,0 +1,71 @@
+/*
+Copyright 2019 Tom Saleeba <ergoslab@techotom.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x5148
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    tomsaleeba
+#define PRODUCT         Ergoslab Keyboard
+#define DESCRIPTION     Split 45 percent ergonomic keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 6
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D2
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+
+#define RGBLED_NUM 2    // Number of LEDs
+// FIXME this following line should enable our layer status LEDs to work on both
+// sides without need to wire them into a chain. It doesn't though. Uncommenting
+// means the slave side of the keyboard stops working (and the LEDs don't work).
+// #define RGBLED_SPLIT {1,1}
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
diff --git a/keyboards/ergoslab/rev1/rev1.c b/keyboards/ergoslab/rev1/rev1.c
new file mode 100644
index 000000000..0e3e0fe99
--- /dev/null
+++ b/keyboards/ergoslab/rev1/rev1.c
@@ -0,0 +1,18 @@
+#include "rev1.h"
+
+#ifdef SWAP_HANDS_ENABLE
+__attribute__ ((weak))
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+    {{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}, {5, 5}},
+    {{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}, {5, 6}},
+    {{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}, {5, 7}},
+    {{0, 8}, {1, 8}, {2, 8}, {3, 8}, {4, 8}, {5, 8}},
+    {{0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}, {5, 9}},
+
+    {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}, {5, 0}},
+    {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}, {5, 1}},
+    {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}, {5, 2}},
+    {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}, {5, 3}},
+    {{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}, {5, 4}},
+};
+#endif
diff --git a/keyboards/ergoslab/rev1/rev1.h b/keyboards/ergoslab/rev1/rev1.h
new file mode 100644
index 000000000..bf99a17b2
--- /dev/null
+++ b/keyboards/ergoslab/rev1/rev1.h
@@ -0,0 +1,24 @@
+#pragma once
+
+#include "ergoslab.h"
+
+#include "quantum.h"
+
+#define LAYOUT_ergoslab( \
+	L00, L01, L02, L03, L04,           R04, R03, R02, R01, R00, \
+	L10, L11, L12, L13, L14,           R14, R13, R12, R11, R10, \
+	L20, L21, L22, L23, L24,           R24, R23, R22, R21, R20, \
+	L30, L31, L32, L33, L34, L35, R35, R34, R33, R32, R31, R30, \
+	     L41, L42, L43, L44, L45, R45, R44, R43, R42, R41       \
+) { \
+  { L00,   L01,   L02, L03, L04,   KC_NO }, \
+	{ L10,   L11,   L12, L13, L14,   KC_NO }, \
+	{ L20,   L21,   L22, L23, L24,   KC_NO }, \
+	{ L30,   L31,   L32, L33, L34,   L35   }, \
+	{ KC_NO, L41,   L42, L43, L44,   L45   }, \
+	{ R00,   R01,   R02, R03, R04,   KC_NO }, \
+	{ R10,   R11,   R12, R13, R14,   KC_NO }, \
+	{ R20,   R21,   R22, R23, R24,   KC_NO }, \
+	{ R30,   R31,   R32, R33, R34,   R35   }, \
+	{ KC_NO, R41,   R42, R43, R44,   R45   }  \
+ }
diff --git a/keyboards/ergoslab/rules.mk b/keyboards/ergoslab/rules.mk
new file mode 100644
index 000000000..f5ae8c51e
--- /dev/null
+++ b/keyboards/ergoslab/rules.mk
@@ -0,0 +1,35 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+SPLIT_KEYBOARD = yes
+
+DEFAULT_FOLDER = ergoslab/rev1