diff options
author | Jack Humbert <jack.humb@gmail.com> | 2016-09-23 15:27:20 -0400 |
---|---|---|
committer | GitHub <noreply@github.com> | 2016-09-23 15:27:20 -0400 |
commit | e1fa9073c263d260fc0ec3c0d2d8a6a6f5aee42e (patch) | |
tree | 65cadb7c337c9c295dc278e0db39e9af35ebb516 /keyboards/tada68/rules.mk | |
parent | 3d42d60b7f778d20f11f058aa278effce2bdb9c1 (diff) | |
parent | e71d4f3235348f6b6ac0e884ddf0a46991eace26 (diff) | |
download | firmware-e1fa9073c263d260fc0ec3c0d2d8a6a6f5aee42e.tar.gz firmware-e1fa9073c263d260fc0ec3c0d2d8a6a6f5aee42e.tar.bz2 firmware-e1fa9073c263d260fc0ec3c0d2d8a6a6f5aee42e.zip |
Merge pull request #778 from TerryMathews/master
Establish support for TADA68
Diffstat (limited to 'keyboards/tada68/rules.mk')
-rw-r--r-- | keyboards/tada68/rules.mk | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/keyboards/tada68/rules.mk b/keyboards/tada68/rules.mk new file mode 100644 index 000000000..d8ec42365 --- /dev/null +++ b/keyboards/tada68/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID |