[Keyboard] Move more percent boards into the percent directory (#6781)

* move canoe into percent directory

* update readme for new make path

* move skog into percent directory

* update readme for new path and new instructions

* update readme

* fix error in naming

1 files changed, 0 insertions, 61 deletions

diff --git a/keyboards/skog/README.md b/keyboards/skog/README.md
deleted file mode 100644
index 51a792b6b..000000000
--- a/keyboards/skog/README.md
+++ /dev/null
@@ -1,61 +0,0 @@
-Skog TKL by Percent
-==========================
-
-Keyboard Maintainer: QMK Community  
-Hardware Supported: Skog PCB  
-Hardware Availability: https://geekhack.org/index.php?topic=87953.0
-
-Make example for this keyboard (after setting up your build environment):
-
-    make skog:default
-
-## Setting the board to bootloader mode
-
-If you're lucky, the programming script does this automagically for you. If
-however this doesn't work for you, you need to enter the bootloader mode manually
-by plugging the keyboard in while holding the bootloader key. If you did this
-correctly the LEDs will blink and you'll be able to flash your firmware.
-
-The bootloader key is in the top-right (Pause).
-
-## Flashing
-
-ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
-
-Windows: 
-1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
-2. Place your keyboard into reset. 
-3. Press the `Find Device` button and ensure that your keyboard is found.
-4. Press the `Open .hex File` button and locate the `.hex` file you created.
-5. Press the `Flash Device` button and wait for the process to complete. 
-
-macOS:
-1. Install homebrew by typing the following:   
-    ```
-    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
-    ```
-2. Install `crosspack-avr`.  
-    ```
-    brew cask install crosspack-avr
-    ```
-3. Install the following packages:
-    ```
-    brew install python
-    brew install pyusb
-    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-
-4. Place your keyboard into reset. 
-5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-## Troubleshooting
-
-From my experience, it's really hard to brick these boards. But these
-tricks have been useful when it got stuck in a weird scenario.
-
-1. Try plugging the board in while holding the bootloader key. This will force 
-   it to boot only the bootloader without loading the firmware. Once this is
-   done, just reflash the board with the original firmware.
-2. Sometimes USB hubs can act weird, so try connecting the board directly
-   to your computer or plugging/unplugging the USB hub.