aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/s65_x/rules.mk
diff options
context:
space:
mode:
authorGeoff Lane <geoff@zorched.net>2017-06-10 21:04:16 -0400
committerGeoff Lane <geoff@zorched.net>2017-06-10 21:09:38 -0400
commitb1e01e9d1ffcc6ca0803f30c09d3eebe6a90186b (patch)
tree8f5b644b88ba59fa121bba1068f0a360dabf2f44 /keyboards/s65_x/rules.mk
parentb721779241d91ef46279fcaae447aa8eacb75422 (diff)
downloadfirmware-b1e01e9d1ffcc6ca0803f30c09d3eebe6a90186b.tar.gz
firmware-b1e01e9d1ffcc6ca0803f30c09d3eebe6a90186b.tar.bz2
firmware-b1e01e9d1ffcc6ca0803f30c09d3eebe6a90186b.zip
Support Sentraq S65-X
Add initial support for ANSI layout of S65-X. Includes support for controlling RGB underlighting.
Diffstat (limited to 'keyboards/s65_x/rules.mk')
-rw-r--r--keyboards/s65_x/rules.mk67
1 files changed, 67 insertions, 0 deletions
diff --git a/keyboards/s65_x/rules.mk b/keyboards/s65_x/rules.mk
new file mode 100644
index 000000000..9d8b559af
--- /dev/null
+++ b/keyboards/s65_x/rules.mk
@@ -0,0 +1,67 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+MIDI_ENABLE ?= no # MIDI controls
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no # Audio output on port C6
+NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE ?= yes # Enable RGB light