VIA Configurator Refactor (#7268)

* VIA Refactor

* Remove old code

* review changes

* review changes

* Fix cannonkeys/satisfaction75/prototype:via build

* Add via.h to quantum.h

* Move backlight init to after backlight config load

* Merge branch 'master' into via_refactor_pr

* Update user's rules.mk to new way of enabling VIA

* Added id_switch_matrix_state

* Review changes

2 files changed, 1 insertions, 105 deletions

diff --git a/keyboards/primekb/prime_e/config.h b/keyboards/primekb/prime_e/config.h
index 46124973d..bf5061b1a 100644
--- a/keyboards/primekb/prime_e/config.h
+++ b/keyboards/primekb/prime_e/config.h
@@ -50,23 +50,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 34
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 36
-
-// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
-// Dynamic macro starts after dynamic keymaps (37+(4*13*4*2)) = (37+416)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 453
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 571    // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
diff --git a/keyboards/primekb/prime_e/keymaps/via/rules.mk b/keyboards/primekb/prime_e/keymaps/via/rules.mk
index c981a2f26..1e5b99807 100644
--- a/keyboards/primekb/prime_e/keymaps/via/rules.mk
+++ b/keyboards/primekb/prime_e/keymaps/via/rules.mk
@@ -1,85 +1 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
-BOOTLOADER = atmel-dfu
-
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
-
-# This is the VIA magic
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-SRC += keyboards/wilba_tech/wt_main.c
\ No newline at end of file
+VIA_ENABLE = yes