Keyboard: added mehkee96 support -JT (#3957)

* added mehkee96 support -JT

* making requested changes -JT

* fixes -jt

* fixed info.json -JT

* tidy up info.json comments from noroadsleft -JT

13 files changed, 1110 insertions, 0 deletions

diff --git a/keyboards/mehkee96/config.h b/keyboards/mehkee96/config.h
new file mode 100644
index 000000000..70ca273c3
--- /dev/null
+++ b/keyboards/mehkee96/config.h
@@ -0,0 +1,18 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x20A0
+#define PRODUCT_ID      0x422D
+#define MANUFACTURER    mehkee
+#define PRODUCT         96kee
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 15
+
+#define RGBLED_NUM 16
+#define RGBLIGHT_ANIMATIONS
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
diff --git a/keyboards/mehkee96/i2c.c b/keyboards/mehkee96/i2c.c
new file mode 100644
index 000000000..a4f952135
--- /dev/null
+++ b/keyboards/mehkee96/i2c.c
@@ -0,0 +1,106 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+// Please do not modify this file 
+
+#include <avr/io.h>
+#include <util/twi.h>
+
+#include "i2c.h"
+
+void i2c_set_bitrate(uint16_t bitrate_khz) {
+    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
+    if (bitrate_div >= 16) {
+        bitrate_div = (bitrate_div - 16) / 2;
+    }
+    TWBR = bitrate_div;
+}
+
+void i2c_init(void) {
+    // set pull-up resistors on I2C bus pins
+    PORTC |= 0b11;
+
+    i2c_set_bitrate(400);
+
+    // enable TWI (two-wire interface)
+    TWCR |= (1 << TWEN);
+
+    // enable TWI interrupt and slave address ACK
+    TWCR |= (1 << TWIE);
+    TWCR |= (1 << TWEA);
+}
+
+uint8_t i2c_start(uint8_t address) {
+    // reset TWI control register
+    TWCR = 0;
+
+    // begin transmission and wait for it to end
+    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the start condition was successfully transmitted
+    if ((TWSR & 0xF8) != TW_START) {
+        return 1;
+    }
+
+    // transmit address and wait
+    TWDR = address;
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the device has acknowledged the READ / WRITE mode
+    uint8_t twst = TW_STATUS & 0xF8;
+    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
+        return 1;
+    }
+
+    return 0;
+}
+
+void i2c_stop(void) {
+    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+}
+
+uint8_t i2c_write(uint8_t data) {
+    TWDR = data;
+
+    // transmit data and wait
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
+        return 1;
+    }
+
+    return 0;
+}
+
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
+    if (i2c_start(address)) {
+        return 1;
+    }
+
+    for (uint16_t i = 0; i < length; i++) {
+        if (i2c_write(data[i])) {
+            return 1;
+        }
+    }
+
+    i2c_stop();
+
+    return 0;
+}
diff --git a/keyboards/mehkee96/i2c.h b/keyboards/mehkee96/i2c.h
new file mode 100644
index 000000000..7ce50cdb5
--- /dev/null
+++ b/keyboards/mehkee96/i2c.h
@@ -0,0 +1,27 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+// Please do not modify this file
+
+#ifndef __I2C_H__
+#define __I2C_H__
+
+void i2c_init(void);
+void i2c_set_bitrate(uint16_t bitrate_khz);
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
+
+#endif
diff --git a/keyboards/mehkee96/info.json b/keyboards/mehkee96/info.json
new file mode 100644
index 000000000..75da3e591
--- /dev/null
+++ b/keyboards/mehkee96/info.json
@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "mehkee96",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 19,
+    "height": 6,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"Print Screen", "x":13, "y":0}, {"label":"Delete", "x":14, "y":0}, {"label":"Home", "x":15, "y":0}, {"label":"End", "x":16, "y":0}, {"label":"Page Up", "x":17, "y":0}, {"label":"Page Down", "x":18, "y":0}, {"label":"`", "x":0, "y":1}, {"label":"1", "x":1, "y":1}, {"label":"2", "x":2, "y":1}, {"label":"3", "x":3, "y":1}, {"label":"4", "x":4, "y":1}, {"label":"5", "x":5, "y":1}, {"label":"6", "x":6, "y":1}, {"label":"7", "x":7, "y":1}, {"label":"8", "x":8, "y":1}, {"label":"9", "x":9, "y":1}, {"label":"0", "x":10, "y":1}, {"label":"-", "x":11, "y":1}, {"label":"=", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Num Lock", "x":15, "y":1}, {"label":"P/", "x":16, "y":1}, {"label":"P*", "x":17, "y":1}, {"label":"P-", "x":18, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"[", "x":11.5, "y":2}, {"label":"]", "x":12.5, "y":2}, {"label":"\\", "x":13.5, "y":2, "w":1.5}, {"label":"P7", "x":15, "y":2}, {"label":"P8", "x":16, "y":2}, {"label":"P9", "x":17, "y":2}, {"label":"P+", "x":18, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":";", "x":10.75, "y":3}, {"label":"'", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"P4", "x":15, "y":3}, {"label":"P5", "x":16, "y":3}, {"label":"P6", "x":17, "y":3}, {"label":"P+", "x":18, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":",", "x":9.25, "y":4}, {"label":".", "x":10.25, "y":4}, {"label":"/", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"Up", "x":14, "y":4}, {"label":"P1", "x":15, "y":4}, {"label":"P2", "x":16, "y":4}, {"label":"P3", "x":17, "y":4}, {"label":"PEnter", "x":18, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Win", "x":11, "y":5}, {"label":"Fn", "x":12, "y":5}, {"label":"Left", "x":13, "y":5}, {"label":"Down", "x":14, "y":5}, {"label":"Right", "x":15, "y":5}, {"label":"P0", "x":16, "y":5}, {"label":"P.", "x":17, "y":5}, {"label":"PEnter", "x":18, "y":5}]
+        }
+    }
+}
diff --git a/keyboards/mehkee96/keymaps/default/keymap.c b/keyboards/mehkee96/keymaps/default/keymap.c
new file mode 100644
index 000000000..cd69fb2fe
--- /dev/null
+++ b/keyboards/mehkee96/keymaps/default/keymap.c
@@ -0,0 +1,80 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Layer 0, default layer
+____________________________________________________________________________________________________________________________________________________________________________
+|        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+| ESC*   |   F1   |   F2   |   F3   |   F4   |   F5   |   F6   |   F7   |   F8   |   F9   |  F10   |  F11   |  F12   | P SCN  |  DEL   |  HOME  |  END   |  P Up  | P Down |
+|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|
+|        |        |        |        |        |        |        |        |        |        |        |        |        |        | BACK   |  NUM   |        |        |        |
+|  ~`    |   1    |   2    |   3    |   4    |   5    |   6    |   7    |   8    |   9    |   0    |  _ -   | =  +   |   \    | SPACE  |  LOCK  |   /    |  *     |    -   |
+|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|
+|            |        |        |        |        |        |        |        |        |        |        |  [     |   ]    |             |        |        |        |        |
+|    TAB     |   Q    |   W    |   E    |   R    |   T    |   Y    |   U    |   I    |   O    |   P    |  {     |   }    |  |   \      |   7    |   8    |   9    |    +   |
+|____________|________|________|________|________|________|________|________|________|________|________|________|________|_____________|________|________|________|________|
+|              |        |        |        |        |        |        |        |        |        |   ;    |   '    |                    |        |        |        |        |
+|   CAPS LOCK  |   A    |   S    |   D    |   F    |   G    |   H    |   J    |   K    |   L    |   :    |   "    |       ENTER        |   4    |   5    |   6    |    +   |
+|______________|________|________|________|________|________|________|________|________|________|________|________|____________________|________|________|________|________|
+|                  |        |        |        |        |        |        |        |   ,    |    .   |   /    |                |        |        |        |        |        |
+|  SHIFT           |   Z    |   X    |   C    |   V    |   B    |   N    |   M    |   <    |    >   |   ?    |       SHIFT    |   UP   |   1    |   2    |   3    | ENTER  |
+|__________________|________|________|________|________|________|________|________|________|________|________|________________|________|________|________|________|________|
+|          |          |          |                                                        |        |        |   MO   |        |        |        |        |        |        |
+| CTRL     |   LGUI   | L ALT    |                      SPACE                             | R ALT  |  RGUI  |  _FN   |  LEFT  |  DOWN  | RIGHT  |   0    |   .    | ENTER  |
+|__________|__________|__________|________________________________________________________|________|________|________|________|________|________|________|________|________|
+*/
+
+
+
+	LAYOUT(
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_DEL,  KC_HOME, KC_END,  KC_PGUP, KC_PGDN,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS, KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+    KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT, KC_PENT),
+
+
+
+  /* Layer 1, function layer
+____________________________________________________________________________________________________________________________________________________________________________
+|        |        |        |        |        |        |        |        |        |        |        |        |        |        |  VOL   |  VOL   |        |        |        |
+| RESET  |        |        |        |        |        |        |        |        |        |        |        |        | MUTE   |  DOWN  |   UP   |        |        |        |
+|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|
+|        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+|        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|
+|            |  RGB   |        |  RGB   |  HUE   |  HUE   | SATUR. | SATUR. | VALUE  | VALUE  |        |        |        |             |        |        |        |        |
+|            | TOGGLE |        |  MODE  |INCREASE| DCRSE  |INCREASE| DCRSE  |INCREASE| DCRSE  |        |        |        |             |        |        |        |        |
+|____________|________|________|________|________|________|________|________|________|________|________|________|________|_____________|________|________|________|________|
+| BACKLIGHT    |        |        |        |        |        |        |        |        |        |        |        |                    |        |        |        |        |
+| TOGGLE       |        |        |        |        |        |        |        |        |        |        |        |                    |        |        |        |        |
+|______________|________|________|________|________|________|________|________|________|________|________|________|____________________|________|________|________|________|
+|         |        |        |        |BACKLHT |BACKLHT |BACKLHT |        |        |        |        |        |                |        |        |        |        |        |
+|         |        |        |        | DCRSE  |TOGGLE  |INCREASE|        |        |        |        |        |                |        |        |        |        |        |
+|_________|________|________|________|________|________|________|________|________|________|________|________|________________|________|________|________|________|________|
+|          |          |          |                                                        |        |        |        |        |        |        |        |        |        |
+|          |          |          |                                                        |        |        |        |        |        |        |        |        |        |
+|__________|__________|__________|________________________________________________________|________|________|________|________|________|________|________|________|________|
+BL_TOGG, BL_DEC, BL_INC changes the in-switch LEDs
+*/
+
+
+	LAYOUT(
+    RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______,
+    _______, RGB_TOG, _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______,          _______, _______, _______, _______,
+    BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______,
+    _______         , _______, _______, BL_DEC,  BL_TOGG, BL_INC,  _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______,
+    _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______, _______, _______, _______),
+};
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
diff --git a/keyboards/mehkee96/keymaps/johann/keymap.c b/keyboards/mehkee96/keymaps/johann/keymap.c
new file mode 100644
index 000000000..a0212702a
--- /dev/null
+++ b/keyboards/mehkee96/keymaps/johann/keymap.c
@@ -0,0 +1,80 @@
+#include "mehkee96.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Layer 0, default layer
+____________________________________________________________________________________________________________________________________________________________________________
+|        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+| ESC*   |   F1   |   F2   |   F3   |   F4   |   F5   |   F6   |   F7   |   F8   |   F9   |  F10   |  F11   |  F12   | P SCN  |  HOME  |   DEL  | INSERT |  P Up  | P Down |
+|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|
+|        |        |        |        |        |        |        |        |        |        |        |        |        |        | BACK   |  NUM   |        |        | Play   |
+|  ~`    |   1    |   2    |   3    |   4    |   5    |   6    |   7    |   8    |   9    |   0    |  _ -   | =  +   |   \    | SPACE  |  LOCK  |   /    |  *     | Pause  |
+|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|
+|            |        |        |        |        |        |        |        |        |        |        |  [     |   ]    |             |        |        |        |        |
+|    TAB     |   Q    |   W    |   E    |   R    |   T    |   Y    |   U    |   I    |   O    |   P    |  {     |   }    |  |   \      |   7    |   8    |   9    |  Next  |
+|____________|________|________|________|________|________|________|________|________|________|________|________|________|_____________|________|________|________|________|
+|              |        |        |        |        |        |        |        |        |        |   ;    |   '    |                    |        |        |        |        |
+|   CAPS LOCK  |   A    |   S    |   D    |   F    |   G    |   H    |   J    |   K    |   L    |   :    |   "    |       ENTER        |   4    |   5    |   6    |   -    |
+|______________|________|________|________|________|________|________|________|________|________|________|________|____________________|________|________|________|________|
+|                  |        |        |        |        |        |        |        |   ,    |    .   |   /    |                |        |        |        |        |        |
+|  SHIFT           |   Z    |   X    |   C    |   V    |   B    |   N    |   M    |   <    |    >   |   ?    |       SHIFT    |   UP   |   1    |   2    |   3    |   +    |
+|__________________|________|________|________|________|________|________|________|________|________|________|________________|________|________|________|________|________|
+|          |          |          |                                                        |        |        |   MO   |        |        |        |        |        |        |
+| CTRL     |   LGUI   | L ALT    |                      SPACE                             | R ALT  |  RGUI  |  _FN   |  LEFT  |  DOWN  | RIGHT  |   0    |   .    | ENTER  |
+|__________|__________|__________|________________________________________________________|________|________|________|________|________|________|________|________|________|
+*/
+
+
+
+	LAYOUT(
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_HOME, KC_DEL,  KC_INS,  KC_PGUP, KC_PGDN,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_MPLY,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS, KC_P7,   KC_P8,   KC_P9,   KC_MNXT,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_P4,   KC_P5,   KC_P6,   KC_PMNS,
+    KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_P1,   KC_P2,   KC_P3,   KC_PPLS,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT, KC_PENT),
+
+
+
+  /* Layer 1, function layer
+____________________________________________________________________________________________________________________________________________________________________________
+|        |        |        |        |        |        |        |        |        |        |        |        |        |        |  VOL   |  VOL   |        |        |        |
+| RESET  |        |        |        |        |        |        |        |        |        |        |        |        | MUTE   |  DOWN  |   UP   |        |        |        |
+|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|
+|        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+|        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|
+|            |  RGB   |        |  RGB   |  HUE   |  HUE   | SATUR. | SATUR. | VALUE  | VALUE  |        |        |        |             |        |        |        |        |
+|            | TOGGLE |        |  MODE  |INCREASE| DCRSE  |INCREASE| DCRSE  |INCREASE| DCRSE  |        |        |        |             |        |        |        |        |
+|____________|________|________|________|________|________|________|________|________|________|________|________|________|_____________|________|________|________|________|
+| BACKLIGHT    |        |        |        |        |        |        |        |        |        |        |        |                    |        |        |        |        |
+| TOGGLE       |        |        |        |        |        |        |        |        |        |        |        |                    |        |        |        |        |
+|______________|________|________|________|________|________|________|________|________|________|________|________|____________________|________|________|________|________|
+|         |        |        |        |BACKLHT |BACKLHT |BACKLHT |        |        |        |        |        |                |        |        |        |        |        |
+|         |        |        |        | DCRSE  |TOGGLE  |INCREASE|        |        |        |        |        |                |        |        |        |        |        |
+|_________|________|________|________|________|________|________|________|________|________|________|________|________________|________|________|________|________|________|
+|          |          |          |                                                        |        |        |        |        |        |        |        |        |        |
+|          |          |          |                                                        |        |        |        |        |        |        |        |        |        |
+|__________|__________|__________|________________________________________________________|________|________|________|________|________|________|________|________|________|
+BL_TOGG, BL_DEC, BL_INC changes the in-switch LEDs
+*/
+
+
+	LAYOUT(
+    RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______,
+    _______, RGB_TOG, _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______,          _______, _______, _______, _______,
+    BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______,
+    _______         , _______, _______, BL_DEC,  BL_TOGG, BL_INC,  _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______,
+    _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______, _______, _______, _______),
+};
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
diff --git a/keyboards/mehkee96/matrix.c b/keyboards/mehkee96/matrix.c
new file mode 100644
index 000000000..bbb84e52e
--- /dev/null
+++ b/keyboards/mehkee96/matrix.c
@@ -0,0 +1,130 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include <util/delay.h>
+
+#include "matrix.h"
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+
+static uint8_t debouncing = DEBOUNCE;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+void matrix_set_row_status(uint8_t row);
+uint8_t bit_reverse(uint8_t x);
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+void matrix_init(void) {
+    // all outputs for rows high
+    DDRB = 0xFF;
+    PORTB = 0xFF;
+    // all inputs for columns
+    DDRA = 0x00;
+    DDRC &= ~(0x111111<<2);
+    DDRD &= ~(1<<PIND7);
+    // all columns are pulled-up
+    PORTA = 0xFF;
+    PORTC |= (0b111111<<2);
+    PORTD |= (1<<PIND7);
+
+    // initialize matrix state: all keys off
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        matrix[row] = 0x00;
+        matrix_debouncing[row] = 0x00;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        matrix_set_row_status(row);
+        _delay_us(5);
+
+        matrix_row_t cols = (
+            // cols 0..7, PORTA 0 -> 7
+            (~PINA) & 0xFF
+        ) | (
+            // cols 8..13, PORTC 7 -> 0
+            bit_reverse((~PINC) & 0xFF) << 8
+        ) | (
+            // col 14, PORTD 7
+            ((~PIND) & (1 << PIND7)) << 7
+        );
+
+        if (matrix_debouncing[row] != cols) {
+            matrix_debouncing[row] = cols;
+            debouncing = DEBOUNCE;
+        }
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    matrix_scan_quantum();
+
+    return 1;
+}
+
+// declarations
+void matrix_set_row_status(uint8_t row) {
+    DDRB = (1 << row);
+    PORTB = ~(1 << row);
+}
+
+uint8_t bit_reverse(uint8_t x) {
+    x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
+    x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
+    x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
+    return x;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+    return matrix[row];
+}
+
+void matrix_print(void) {
+}
diff --git a/keyboards/mehkee96/mehkee96.c b/keyboards/mehkee96/mehkee96.c
new file mode 100644
index 000000000..604fad803
--- /dev/null
+++ b/keyboards/mehkee96/mehkee96.c
@@ -0,0 +1,81 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "mehkee96.h"
+#include "rgblight.h"
+
+#include <avr/pgmspace.h>
+
+#include "action_layer.h"
+#include "i2c.h"
+#include "quantum.h"
+
+// for keyboard subdirectory level init functions
+// @Override
+void matrix_init_kb(void) {
+  // call user level keymaps, if any
+  matrix_init_user();
+}
+
+#ifdef RGBLIGHT_ENABLE
+extern rgblight_config_t rgblight_config;
+
+// custom RGB driver
+void rgblight_set(void) {
+  if (!rgblight_config.enable) {
+    for (uint8_t i=0; i<RGBLED_NUM; i++) {
+      led[i].r = 0;
+      led[i].g = 0;
+      led[i].b = 0;
+    }
+  }
+
+  i2c_init();
+  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+
+bool rgb_init = false;
+
+void matrix_scan_kb(void) {
+  // if LEDs were previously on before poweroff, turn them back on
+  if (rgb_init == false && rgblight_config.enable) {
+    i2c_init();
+    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+    rgb_init = true;
+  }
+
+#ifdef RGBLIGHT_ANIMATION
+  rgblight_task();
+#endif
+
+#else
+void matrix_scan_kb(void) {
+#endif
+  matrix_scan_user();
+  /* Nothing else for now. */
+}
+
+__attribute__((weak)) // overridable
+void matrix_init_user(void) {
+
+}
+
+
+__attribute__((weak)) // overridable
+void matrix_scan_user(void) {
+
+}
diff --git a/keyboards/mehkee96/mehkee96.h b/keyboards/mehkee96/mehkee96.h
new file mode 100644
index 000000000..1e1eb44a6
--- /dev/null
+++ b/keyboards/mehkee96/mehkee96.h
@@ -0,0 +1,24 @@
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+  K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE2, KD0, K67, K87, K97, \
+  K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4,      K64, K74, K84, K94, \
+  K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3,      K63, K73, K83, K93, \
+  K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2,           K62, K72, K82, K92, \
+  K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1,           K86, K61, K71, K81, K91, \
+  K00, K10, K20,           K56,                     K57, KA0, KB0, K66, K76, K96, K60, K80, K90  \
+) { \
+	{ K00,  K10,    K20,  KC_NO,  KC_NO,  KC_NO,  K60,    KC_NO,  K80, K90,   KA0,   KB0, KC_NO, KD0,   KC_NO }, \
+	{ K01,  K11,    K21,  K31,    K41,    K51,    K61,    K71,  K81,   K91,   KA1,   KB1, KC_NO, KD1,   KC_NO }, \
+	{ K02,  K12,    K22,  K32,    K42,    K52,    K62,    K72,  K82,   K92,   KA2,   KB2, KC_NO, KD2,   KE2   }, \
+	{ K03,  K13,    K23,  K33,    K43,    K53,    K63,    K73,  K83,   K93,   KA3,   KB3, KC3,   KD3,   KC_NO }, \
+	{ K04,  K14,    K24,  K34,    K44,    K54,    K64,    K74,  K84,   K94,   KA4,   KB4, KC4,   KC_NO, KE4   }, \
+	{ K05,  KC_NO,  K25,  K35,    K45,    K55,    KC_NO,  KC_NO,KC_NO, KC_NO, KC_NO, KB5, KC5,   KD5,   KE5   }, \
+	{ K06,  K16,    K26,  K36,    K46,    K56,    K66,    K76,  K86,   K96,   KA6,   KB6, KC6,   KD6,   KE6   }, \
+	{ K07,  K17,    K27,  K37,    K47,    K57,    K67,    KC_NO,K87,   K97,   KA7,   KB7, KC7,   KD7,   KE7   }  \
+}
+
+#endif
diff --git a/keyboards/mehkee96/program b/keyboards/mehkee96/program
new file mode 100644
index 000000000..b777b9110
--- /dev/null
+++ b/keyboards/mehkee96/program
@@ -0,0 +1,105 @@
+#!/usr/bin/env python
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>, Sebastian Kaim <sebb@sebb767.de>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+from __future__ import print_function
+
+import os
+import sys
+import time
+import usb
+
+
+def checkForKeyboardInNormalMode():
+    """Returns a device if a ps2avrGB device in normal made (that is in keyboard mode) or None if it is not found."""
+    return usb.core.find(idVendor=0x20A0, idProduct=0x422D)
+
+def checkForKeyboardInBootloaderMode():
+    """Returns True if a ps2avrGB device in bootloader (flashable) mode is found and False otherwise."""
+    return (usb.core.find(idVendor=0x16c0, idProduct=0x05df) is not None)
+
+def flashKeyboard(firmware_file):
+    """Calls bootloadHID to flash the given file to the device."""
+    print('Flashing firmware to device ...')
+    if os.system('bootloadHID -r "%s"' % firmware_file) == 0:
+        print('\nDone!')
+    else:
+        print('\nbootloadHID returned an error.')
+
+def printDeviceInfo(dev):
+    """Prints all infos for a given USB device"""
+    print('Device Information:')
+    print('  idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor))
+    print('  idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct))
+    print('Manufacturer: %s' % (dev.iManufacturer))
+    print('Serial: %s' % (dev.iSerialNumber))
+    print('Product: %s' % (dev.iProduct), end='\n\n')
+
+def sendDeviceToBootloaderMode(dev):
+    """Tries to send a given ps2avrGB keyboard to bootloader mode to allow flashing."""
+    try:
+        dev.set_configuration()
+
+        request_type = usb.util.build_request_type(
+                usb.util.CTRL_OUT,
+                usb.util.CTRL_TYPE_CLASS,
+                usb.util.CTRL_RECIPIENT_DEVICE)
+
+        USBRQ_HID_SET_REPORT = 0x09
+        HID_REPORT_OPTION = 0x0301
+
+        dev.ctrl_transfer(request_type, USBRQ_HID_SET_REPORT, HID_REPORT_OPTION, 0, [0, 0, 0xFF] + [0] * 5)
+    except usb.core.USBError:
+        # for some reason I keep getting USBError, but it works!
+        pass
+
+
+if len(sys.argv) < 2:
+    print('Usage: %s <firmware.hex>' % sys.argv[0])
+    sys.exit(1)
+
+kb = checkForKeyboardInNormalMode()
+
+if kb is not None:
+    print('Found a keyboard in normal mode. Attempting to send it to bootloader mode ...', end='')
+    sendDeviceToBootloaderMode(kb)
+    print(' done.')
+    print("Hint: If your keyboard can't be set to bootloader mode automatically, plug it in while pressing the bootloader key to do so manually.")
+    print("      You can find more infos about this here: https://github.com/qmk/qmk_firmware/tree/master/keyboards/ps2avrGB#setting-the-board-to-bootloader-mode")
+
+attempts = 12  # 60 seconds
+found = False
+for attempt in range(1, attempts + 1):
+    print("Searching for keyboard in bootloader mode (%i/%i) ... " % (attempt, attempts), end='')
+
+    if checkForKeyboardInBootloaderMode():
+        print('Found', end='\n\n')
+        flashKeyboard(sys.argv[1])
+        found = True
+        break
+    else:
+        print('Nothing.', end='')
+
+        if attempt != attempts:  # no need to wait on the last attempt
+            print(' Sleeping 5 seconds.', end='')
+            time.sleep(5)
+
+        # print a newline
+        print()
+
+if not found:
+    print("Couldn't find a flashable keyboard. Aborting.")
+    sys.exit(2)
+
diff --git a/keyboards/mehkee96/readme.md b/keyboards/mehkee96/readme.md
new file mode 100644
index 000000000..9dfad2a79
--- /dev/null
+++ b/keyboards/mehkee96/readme.md
@@ -0,0 +1,16 @@
+# Mehkee 96KEE
+
+![mehkee96](https://cdn.shopify.com/s/files/1/1799/1839/products/96KEE_-_1_-_Copy_1024x1024.jpg?v=1516262148)
+
+96-key Keyboard from mehkee
+
+Keyboard Maintainer: [johanntang](https://github.com/johanntang)  
+Hardware Supported: mehkee96  
+Hardware Availability: [mehkee, group buy closed](https://mehkee.com/products/96kee?variant=46912017423)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make mehkee96:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
diff --git a/keyboards/mehkee96/rules.mk b/keyboards/mehkee96/rules.mk
new file mode 100644
index 000000000..e6e7d4a58
--- /dev/null
+++ b/keyboards/mehkee96/rules.mk
@@ -0,0 +1,35 @@
+# MCU name
+MCU = atmega32a
+PROTOCOL = VUSB
+
+# unsupported features for now
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+
+# Processor frequency.
+F_CPU = 12000000
+
+# Bootloader
+BOOTLOADER = bootloadHID
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+# custom matrix setup
+CUSTOM_MATRIX = yes
+SRC = matrix.c i2c.c
+
+# programming options
+PROGRAM_CMD = ./keyboards/mehkee96/program $(TARGET).hex
diff --git a/keyboards/mehkee96/usbconfig.h b/keyboards/mehkee96/usbconfig.h
new file mode 100644
index 000000000..d2d848fcd
--- /dev/null
+++ b/keyboards/mehkee96/usbconfig.h
@@ -0,0 +1,396 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER           500
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x00, 0x02
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
+#define USB_CFG_VENDOR_NAME_LEN 13
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
+#define USB_CFG_DEVICE_NAME_LEN 8
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         EIMSK */
+#define USB_INTR_ENABLE_BIT     INT1
+/* #define USB_INTR_PENDING        EIFR */
+#define USB_INTR_PENDING_BIT    INTF1
+#define USB_INTR_VECTOR         INT1_vect
+
+#endif /* __usbconfig_h_included__ */