Add JC65 ps2avrGB keyboard (#2351)

* Adds JC65 ps2avrGB keyboard

* Adds default keymap

* Adds personal keymap

* Backlight On/off support

Migrated code from the BFake. Functionality only on BL_ON, BL_OFF,
BL_TOGG.

* Backlighting config adjustment

Only 1 level supported.

* Personal keymap update

BL toggle added and RGB layer updates.

* Renamed jc65 ps2avrgb directory

Renamed directory for more clarity.

* Default keymap and default rules

* Personal keymap and personal rules

* Group JC65 QMK and PS2 versions

Group JC65 QMK and PS2 versions, Split directories, Readme for parent
folder.

* Default keycaps and personal keymaps re-added

Default and personal keymaps re-added. Keymaps, Readme, Rules.mk, and
config.h

* v32a default keymap rules

Default to no.

* RGB and Backlight default settings

Set to yes.

* Rules.mk defaults for personal keymap

Rules.mk defaults for personal keymap

* Revised keyboard readme make paths

Revised.

* Path correction

* jc65 default folder set

set default pcb to qmk version

* default rules for v32a

set to enable backlight and rgb by default.

1 files changed, 1 insertions, 68 deletions

diff --git a/keyboards/jc65/rules.mk b/keyboards/jc65/rules.mk
index c2c02b614..050e22e3c 100644
--- a/keyboards/jc65/rules.mk
+++ b/keyboards/jc65/rules.mk
@@ -1,68 +1 @@
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = yes
-MIDI_ENABLE = no            # MIDI controls
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
+DEFAULT_FOLDER = jc65/v32u4
\ No newline at end of file