aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/hid_liber/rules.mk
diff options
context:
space:
mode:
authorbakageta <amo@bakageta.com>2018-07-30 23:37:34 -0700
committerDrashna Jaelre <drashna@live.com>2018-07-30 23:37:34 -0700
commit76f3a10eecbc1c04237b3852a0f3384e681a3492 (patch)
treede3cf3c237f28fe89e1367b778c262107637f29a /keyboards/hid_liber/rules.mk
parent98fa82ceeff2e93a7d65ccf719a2f43ec8c04e08 (diff)
downloadfirmware-76f3a10eecbc1c04237b3852a0f3384e681a3492.tar.gz
firmware-76f3a10eecbc1c04237b3852a0f3384e681a3492.tar.bz2
firmware-76f3a10eecbc1c04237b3852a0f3384e681a3492.zip
Keyboard: Add support for bpiphany's HID Liberation Device (#3470)
* Keyboard: Added support for HID Liberation Device * Keymap: Custom (bakageta) layout for HID Liberation Device * Updated with requested changes
Diffstat (limited to 'keyboards/hid_liber/rules.mk')
-rwxr-xr-xkeyboards/hid_liber/rules.mk73
1 files changed, 73 insertions, 0 deletions
diff --git a/keyboards/hid_liber/rules.mk b/keyboards/hid_liber/rules.mk
new file mode 100755
index 000000000..f28a4c6ae
--- /dev/null
+++ b/keyboards/hid_liber/rules.mk
@@ -0,0 +1,73 @@
+# Project specific files
+SRC = matrix.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+CUSTOM_MATRIX = yes # Custom matrix file
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches