diff options
author | Ole Anders <git@swoy.org> | 2017-03-28 15:55:33 +0200 |
---|---|---|
committer | Ole Anders <git@swoy.org> | 2017-03-28 15:55:33 +0200 |
commit | 62faa20ef6ddab7dacc74123b2253cf25b5c20f7 (patch) | |
tree | 281ae30283f7491b2529465da4897dc2ddd7088c /keyboards/gonnerd/rules.mk | |
parent | d5ee0194abf5cc9df4086a89ad78cf188352028a (diff) | |
parent | 5e4daf1c6db980fad269fe7b013205008bfe701e (diff) | |
download | firmware-62faa20ef6ddab7dacc74123b2253cf25b5c20f7.tar.gz firmware-62faa20ef6ddab7dacc74123b2253cf25b5c20f7.tar.bz2 firmware-62faa20ef6ddab7dacc74123b2253cf25b5c20f7.zip |
Merge remote-tracking branch 'refs/remotes/qmk/master'
Diffstat (limited to 'keyboards/gonnerd/rules.mk')
-rw-r--r-- | keyboards/gonnerd/rules.mk | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/keyboards/gonnerd/rules.mk b/keyboards/gonnerd/rules.mk new file mode 100644 index 000000000..c9b584d54 --- /dev/null +++ b/keyboards/gonnerd/rules.mk @@ -0,0 +1,66 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 8000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration + # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 |