Move GDISP drivers to /drivers/ugfx

1 files changed, 0 insertions, 113 deletions

diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
deleted file mode 100644
index 9650ffb44..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_9 // actually 6
-#define ST7565_ADC              ST7565_ADC_NORMAL
-#define ST7565_COM_SCAN         ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER       0,1,2,3
-/*
- * Custom page order for several LCD boards, e.g. HEM12864-99
- * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
- */
-
-#define ST7565_GPIOPORT GPIOC
-#define ST7565_PORT PORTC
-#define ST7565_A0_PIN 7
-#define ST7565_RST_PIN 8
-#define ST7565_MOSI_PIN 6
-#define ST7565_SLCK_PIN 5
-#define ST7565_SS_PIN 4
-
-#define palSetPadModeRaw(portname, bits) \
-    ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
-
-#define palSetPadModeNamed(portname, portmode) \
-    palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
-
-#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
-// DSPI Clock and Transfer Attributes
-// Frame Size: 8 bits
-// MSB First
-// CLK Low by default
-static const SPIConfig spi1config = {
-   // Operation complete callback or @p NULL.
-  .end_cb = NULL,
-   //The chip select line port - when not using pcs.
-  .ssport = ST7565_GPIOPORT,
-   // brief The chip select line pad number - when not using pcs.
-  .sspad=ST7565_SS_PIN,
-   // SPI initialization data.
-  .tar0 =
-    SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
-    | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
-    | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
-    | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
-    | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
-    | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
-};
-
-static GFXINLINE void acquire_bus(GDisplay *g) {
-    (void) g;
-    // Only the LCD is using the SPI bus, so no need to acquire
-    // spiAcquireBus(&SPID1);
-    spiSelect(&SPID1);
-}
-
-static GFXINLINE void release_bus(GDisplay *g) {
-    (void) g;
-    // Only the LCD is using the SPI bus, so no need to release
-    //spiReleaseBus(&SPID1);
-    spiUnselect(&SPID1);
-}
-
-static GFXINLINE void init_board(GDisplay *g) {
-    (void) g;
-    palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-    palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
-    palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
-    palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
-
-    spiInit();
-    spiStart(&SPID1, &spi1config);
-    release_bus(g);
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
-	(void) g;
-}
-
-static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
-    (void) g;
-    if (state) {
-        palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    }
-    else {
-        palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    }
-}
-
-static GFXINLINE void enter_data_mode(GDisplay *g) {
-    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-static GFXINLINE void enter_cmd_mode(GDisplay *g) {
-    palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-	(void) g;
-	spiSend(&SPID1, length, data);
-}
-
-#endif /* _GDISP_LLD_BOARD_H */