[Keymap] Drashna's Hardware Features Experimentations (#6920)

* Change RGBLight pin for Planck Light

Move it to A0, so that the SPI? pins are available for BT hackery

* Add QMK DFU bootloader info

* Add Solenoid

* Disable annoying white LED on bottom

* Enable Solenoid on Corne

* Remove bounds for animations

* Increase debounce for Ergodox EZ to reduce repeat key issues

* Set swap hands key to be a hold-tap key

This way, it's not ANNOYING and doesn't swap the hands inteniontally

* Move MT Alt in Corne keymap

* Re-Add fine tuned control of secrets

* Squash mods to single row

* Add LRA settings to haptic feedback settings for Rev6

* Fix issue with non-Planck EZ keymaps

* Add 40 Percent Nano with Analog Joystick

* Add Collide39 keymap

* Fix OLED printing to be more flavorful

* Fix up Iris GamePad and come cleanup

* Expand OLED char map further

* Add modded characters to keylogger

* Here be dragons

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Fix up rules for community layouts

* Some more OLED tweaks

* Add mod mask check function

* Change QMK DFU Audio pin to be correct

* Use manual STM config instead of CTPC for Collide 39

4 files changed, 73 insertions, 0 deletions

diff --git a/keyboards/c39/keymaps/drashna/config.h b/keyboards/c39/keymaps/drashna/config.h
new file mode 100755
index 000000000..361f68a78
--- /dev/null
+++ b/keyboards/c39/keymaps/drashna/config.h
@@ -0,0 +1,7 @@
+#pragma once
+
+// place overrides here
+#undef MATRIX_COL_PINS
+#define MATRIX_COL_PINS { A3, A2, A1, A0, B13, B14, B15, B9, B3, B2, B4, A10, A9 }
+#undef MATRIX_ROW_PINS
+#define MATRIX_ROW_PINS { B7, B1, B0 }
diff --git a/keyboards/c39/keymaps/drashna/keymap.c b/keyboards/c39/keymaps/drashna/keymap.c
new file mode 100755
index 000000000..9de75190d
--- /dev/null
+++ b/keyboards/c39/keymaps/drashna/keymap.c
@@ -0,0 +1,45 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _FN1 1
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,----------------------------------------------------------------------------.  ,-------------.
+ * |   Q  |   W  |   E  |   R  |   T  | Bksp |   Y  |   U  |   I  |   O  |   P  |  |  M1  |  M2  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   A  |   S  |   D  |   F  |   G  | Enter|   H  |   J  |   K  |   L  |   ;  |  |  M3  |  M4  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   Z  |   X  |   C  |   V  |   B  |  FN1 |   N  |   M  |   ,  |   .  |   /  |  |  M5  |  M6  |
+ * `----------------------------------------------------------------------------'  `-------------'
+ */
+[_QWERTY] = LAYOUT(
+    KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC,                KC_Y, KC_U, KC_I,    KC_O,   KC_P,      KC_1, KC_2,
+    KC_A, KC_S, KC_D, KC_F, KC_G, MT(MOD_LSFT, KC_ENT),   KC_H, KC_J, KC_K,    KC_L,   KC_SCLN,   KC_3, KC_4,
+    KC_Z, KC_X, KC_C, KC_V, KC_B, LT(_FN1, KC_SPC),       KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,   KC_5, KC_6
+),
+
+/* FN1
+ * ,----------------------------------------------------------------------------.  ,-------------.
+ * |   1  |   2  |   3  |   4  |   5  | Bksp |   6  |   7  |   8  |   9  |   0  |  |  M1  |  M2  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   4  |   5  |   6  |   +  |      | Enter|      |      |      |      |      |  |  M3  |  M4  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   7  |   8  |   9  |   0  |      |  FN1 |      |      |      |      |      |  |  M5  |  M6  |
+ * `----------------------------------------------------------------------------'  `-------------'
+ */
+[_FN1] = LAYOUT(
+    KC_1, KC_2, KC_3, KC_4,    KC_5,    KC_BSPC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,      KC_1, KC_2,
+    KC_4, KC_5, KC_6, KC_PLUS, _______, KC_ENT,  _______, _______, _______, _______, _______,   KC_3, KC_4,
+    KC_7, KC_8, KC_9, KC_0,    _______, _______, _______, _______, _______, _______, _______,   KC_5, KC_6
+),
+};
diff --git a/keyboards/c39/keymaps/drashna/readme.md b/keyboards/c39/keymaps/drashna/readme.md
new file mode 100755
index 000000000..a8efbaa5f
--- /dev/null
+++ b/keyboards/c39/keymaps/drashna/readme.md
@@ -0,0 +1,3 @@
+# @drashna's keymap for the C39
+
+HERE BE DRAGONS
diff --git a/keyboards/c39/keymaps/drashna/rules.mk b/keyboards/c39/keymaps/drashna/rules.mk
new file mode 100644
index 000000000..ae0cc9efe
--- /dev/null
+++ b/keyboards/c39/keymaps/drashna/rules.mk
@@ -0,0 +1,18 @@
+MCU = STM32F303
+BOOTLOADER =
+
+BOOTMAGIC_ENABLE = lite       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = yes         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = yes           # Audio output on port C6
+RGBLIGHT_ENABLE = no        # RGB Enable / Disable