V-USB: Use manufacturer and product strings from config.h (#7797)

* V-USB: Use manufacturer and product strings from config.h

* Update board configs

2 files changed, 6 insertions, 31 deletions

diff --git a/keyboards/ares/config.h b/keyboards/ares/config.h
index 4bfe0867b..ffbe45605 100644
--- a/keyboards/ares/config.h
+++ b/keyboards/ares/config.h
@@ -23,7 +23,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID      0x422D
 #define DEVICE_VER      0x0200
 #define MANUFACTURER    LSJ
-#define PRODUCT         QMK Firmware for Ares
+#define PRODUCT         Ares
 
 #define RGBLED_NUM 16
 
diff --git a/keyboards/ares/usbconfig.h b/keyboards/ares/usbconfig.h
index 7c85ff22c..ad9c95c5d 100644
--- a/keyboards/ares/usbconfig.h
+++ b/keyboards/ares/usbconfig.h
@@ -231,31 +231,6 @@ section at the end of this file).
 #define USB_CFG_DEVICE_VERSION  (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
 /* Version number of the device: Minor number first, then major number.
  */
-#define USB_CFG_VENDOR_NAME     'L', 'S', 'J'
-#define USB_CFG_VENDOR_NAME_LEN 3
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME     'A', 'r', 'e', 's'
-#define USB_CFG_DEVICE_NAME_LEN 4
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
 #define USB_CFG_DEVICE_CLASS        0
 #define USB_CFG_DEVICE_SUBCLASS     0
 /* See USB specification if you want to conform to an existing device class.
@@ -337,11 +312,11 @@ section at the end of this file).
 #define USB_CFG_DESCR_PROPS_DEVICE                  0
 #define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
 //#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
-#define USB_CFG_DESCR_PROPS_STRINGS                 0
-#define USB_CFG_DESCR_PROPS_STRING_0                0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_STRINGS                 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0                USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    USB_PROP_IS_DYNAMIC
 #define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
 //#define USB_CFG_DESCR_PROPS_HID                     0
 #define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC