add Pinky keyboard (#4748)

add Pinky (https://github.com/tamanishi/Pinky3) keyboard

19 files changed, 1181 insertions, 0 deletions

diff --git a/keyboards/pinky/3/3.c b/keyboards/pinky/3/3.c
new file mode 100644
index 000000000..200510d0a
--- /dev/null
+++ b/keyboards/pinky/3/3.c
@@ -0,0 +1 @@
+#include "pinky.h"
diff --git a/keyboards/pinky/3/3.h b/keyboards/pinky/3/3.h
new file mode 100644
index 000000000..ca1109d26
--- /dev/null
+++ b/keyboards/pinky/3/3.h
@@ -0,0 +1,46 @@
+#pragma once
+
+#include "../pinky.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+	#include <avr/io.h>
+	#include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+#define LAYOUT( \
+  L00, L01, L02, L03, L04, L05, L06,  R00, R01, R02, R03, R04, R05, R06, \
+  L10, L11, L12, L13, L14, L15, L16,  R10, R11, R12, R13, R14, R15, R16, \
+  L20, L21, L22, L23, L24, L25, L26,  R20, R21, R22, R23, R24, R25, R26, \
+                 L30, L31, L32, L33,  R30, R31, R32, R33 \
+  ) \
+  { \
+    { L00, L01, L02, L03, L04, L05, L06 }, \
+    { L10, L11, L12, L13, L14, L15, L16 }, \
+    { L20, L21, L22, L23, L24, L25, L26 }, \
+    { KC_NO, KC_NO, KC_NO, L30, L31, L32, L33 }, \
+    { R06, R05, R04, R03, R02, R01, R00 }, \
+    { R16, R15, R14, R13, R12, R11, R10 }, \
+    { R26, R25, R24, R23, R22, R21, R20 }, \
+    { KC_NO, KC_NO, KC_NO, R33, R32, R31, R30 } \
+  }
+
+#define LAYOUT_kc( \
+  L00, L01, L02, L03, L04, L05, L06,  R00, R01, R02, R03, R04, R05, R06, \
+  L10, L11, L12, L13, L14, L15, L16,  R10, R11, R12, R13, R14, R15, R16, \
+  L20, L21, L22, L23, L24, L25, L26,  R20, R21, R22, R23, R24, R25, R26, \
+                 L30, L31, L32, L33,  R30, R31, R32, R33 \
+  ) \
+  LAYOUT( \
+    KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06,   KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \
+    KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16,   KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \
+    KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26,   KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \
+                                  KC_##L30, KC_##L31, KC_##L32, KC_##L33,   KC_##R30, KC_##R31, KC_##R32, KC_##R33 \
+  )
diff --git a/keyboards/pinky/3/config.h b/keyboards/pinky/3/config.h
new file mode 100644
index 000000000..1b120b9cb
--- /dev/null
+++ b/keyboards/pinky/3/config.h
@@ -0,0 +1,246 @@
+/* Copyright 2018 'Masayuki Sunahara'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    tamanishi
+#define PRODUCT         Pinky
+#define DESCRIPTION     A split keyboard with 3 or 4 x7 vertically staggered keys and 4 thumb keys
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 7
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+
+// wiring of each half
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+// #define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+// #define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/pinky/3/keymaps/default/config.h b/keyboards/pinky/3/keymaps/default/config.h
new file mode 100644
index 000000000..db7977672
--- /dev/null
+++ b/keyboards/pinky/3/keymaps/default/config.h
@@ -0,0 +1,31 @@
+/* Copyright 2018 'Masayuki Sunahara'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 200
+#define RETRO_TAPPPING
diff --git a/keyboards/pinky/3/keymaps/default/keymap.c b/keyboards/pinky/3/keymaps/default/keymap.c
new file mode 100644
index 000000000..94ed82b02
--- /dev/null
+++ b/keyboards/pinky/3/keymaps/default/keymap.c
@@ -0,0 +1,134 @@
+/* Copyright 2018 'Masayuki Sunahara'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST
+};
+
+#define ________ KC_TRNS
+#define XXXXXXXX KC_NO
+#define KC_LOWER LOWER
+#define KC_RAISE RAISE
+#define KC_ADJ   ADJUST
+#define KC_CTLTB CTL_T(KC_TAB)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT(
+  //,---------------------------------------------------------------------.  ,---------------------------------------------------------------------.
+        KC_ESC,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,  KC_LPRN,     KC_RPRN,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,  KC_BSPC,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      KC_CTLTB,     KC_A,     KC_S,     KC_D,     KC_F,     KC_G,  KC_LBRC,     KC_RBRC,     KC_H,     KC_J,     KC_K,     KC_L,  KC_SCLN,  KC_QUOT,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+       KC_LSFT,     KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,   KC_ADJ,      KC_ADJ,     KC_N,     KC_M,  KC_COMM,   KC_DOT,  KC_SLSH,   KC_ENT,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+                                     KC_LALT, KC_LOWER,  KC_LGUI,   KC_SPC,      KC_SPC,  KC_RGUI, KC_RAISE,  KC_RALT \
+                                //`---------------------------------------'  `---------------------------------------'
+  ),
+
+  [_LOWER] = LAYOUT( \
+  //,---------------------------------------------------------------------.  ,---------------------------------------------------------------------.
+        KC_GRV,     KC_1,     KC_2,     KC_3,     KC_4,     KC_5, ________,    ________,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,  KC_BSLS,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________,  KC_MINS,   KC_EQL, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________, ________, ________, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+                                    ________, ________, ________, ________,    ________, ________, ________, ________ \
+                                //`---------------------------------------'  `---------------------------------------'
+  ),
+
+  [_RAISE] = LAYOUT( \
+  //,---------------------------------------------------------------------.  ,---------------------------------------------------------------------.
+        KC_GRV,     KC_1,     KC_2,     KC_3,     KC_4,     KC_5, ________,    ________,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,  KC_BSLS,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________,  KC_MINS,   KC_EQL, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________, ________, ________, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+                                    ________, ________, ________, ________,    ________, ________, ________, ________ \
+                                //`---------------------------------------'  `---------------------------------------'
+  ),
+
+  [_ADJUST] = LAYOUT( \
+  //,---------------------------------------------------------------------.  ,---------------------------------------------------------------------.
+      ________,    KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,  KC_LCBR,     KC_RCBR,    KC_F6,    KC_F7,    KC_F8,    KC_F9,   KC_F10, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________,   KC_F11,   KC_F12, ________, ________, ________,  KC_LCBR,     KC_RCBR,  KC_HOME,  KC_PGDN,  KC_PGUP,   KC_END, ________, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________, ________, ________, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+                                    ________, ________, ________, ________,    ________, ________, ________, ________ \
+                                //`---------------------------------------'  `---------------------------------------'
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+    // set_timelog();
+  }
+
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+        if (record->event.pressed) {
+          layer_on(_ADJUST);
+        } else {
+          layer_off(_ADJUST);
+        }
+        return false;
+        break;
+  }
+  return true;
+}
+
diff --git a/keyboards/pinky/3/keymaps/default/rules.mk b/keyboards/pinky/3/keymaps/default/rules.mk
new file mode 100644
index 000000000..176869809
--- /dev/null
+++ b/keyboards/pinky/3/keymaps/default/rules.mk
@@ -0,0 +1,18 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no        # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+SWAP_HANDS_ENABLE = no      # Enable one-hand typing
diff --git a/keyboards/pinky/3/rules.mk b/keyboards/pinky/3/rules.mk
new file mode 100644
index 000000000..1bb8bf6d7
--- /dev/null
+++ b/keyboards/pinky/3/rules.mk
@@ -0,0 +1 @@
+# empty
diff --git a/keyboards/pinky/4/4.c b/keyboards/pinky/4/4.c
new file mode 100644
index 000000000..200510d0a
--- /dev/null
+++ b/keyboards/pinky/4/4.c
@@ -0,0 +1 @@
+#include "pinky.h"
diff --git a/keyboards/pinky/4/4.h b/keyboards/pinky/4/4.h
new file mode 100644
index 000000000..ad105ce7f
--- /dev/null
+++ b/keyboards/pinky/4/4.h
@@ -0,0 +1,51 @@
+#pragma once
+
+#include "../pinky.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+	#include <avr/io.h>
+	#include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+#define LAYOUT( \
+  L00, L01, L02, L03, L04, L05, L06,  R00, R01, R02, R03, R04, R05, R06, \
+  L10, L11, L12, L13, L14, L15, L16,  R10, R11, R12, R13, R14, R15, R16, \
+  L20, L21, L22, L23, L24, L25, L26,  R20, R21, R22, R23, R24, R25, R26, \
+  L30, L31, L32, L33, L34, L35, L36,  R30, R31, R32, R33, R34, R35, R36, \
+                 L40, L41, L42, L43,  R40, R41, R42, R43 \
+  ) \
+  { \
+    { L00, L01, L02, L03, L04, L05, L06 }, \
+    { L10, L11, L12, L13, L14, L15, L16 }, \
+    { L20, L21, L22, L23, L24, L25, L26 }, \
+    { L30, L31, L32, L33, L34, L35, L36 }, \
+    { KC_NO, KC_NO, KC_NO, L40, L41, L42, L43 }, \
+    { R06, R05, R04, R03, R02, R01, R00 }, \
+    { R16, R15, R14, R13, R12, R11, R10 }, \
+    { R26, R25, R24, R23, R22, R21, R20 }, \
+    { R36, R35, R34, R33, R32, R31, R30 }, \
+    { KC_NO, KC_NO, KC_NO, R43, R42, R41, R40 } \
+  }
+
+#define LAYOUT_kc( \
+  L00, L01, L02, L03, L04, L05, L06,  R00, R01, R02, R03, R04, R05, R06, \
+  L10, L11, L12, L13, L14, L15, L16,  R10, R11, R12, R13, R14, R15, R16, \
+  L20, L21, L22, L23, L24, L25, L26,  R20, R21, R22, R23, R24, R25, R26, \
+  L30, L31, L32, L33, L34, L35, L36,  R30, R31, R32, R33, R34, R35, R36, \
+                 L40, L41, L42, L43,  R40, R41, R42, R43 \
+  ) \
+  LAYOUT( \
+    KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06,   KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \
+    KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16,   KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \
+    KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26,   KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \
+    KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36,   KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, KC_##R36, \
+                                  KC_##L40, KC_##L41, KC_##L42, KC_##L43,   KC_##R40, KC_##R41, KC_##R42, KC_##R43 \
+  )
diff --git a/keyboards/pinky/4/config.h b/keyboards/pinky/4/config.h
new file mode 100644
index 000000000..2348d4084
--- /dev/null
+++ b/keyboards/pinky/4/config.h
@@ -0,0 +1,246 @@
+/* Copyright 2018 'Masayuki Sunahara'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    tamanishi
+#define PRODUCT         Pinky
+#define DESCRIPTION     A split keyboard with 3 or 4 x7 vertically staggered keys and 4 thumb keys
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 7
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
+
+// wiring of each half
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+// #define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+// #define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/pinky/4/keymaps/default/config.h b/keyboards/pinky/4/keymaps/default/config.h
new file mode 100644
index 000000000..db7977672
--- /dev/null
+++ b/keyboards/pinky/4/keymaps/default/config.h
@@ -0,0 +1,31 @@
+/* Copyright 2018 'Masayuki Sunahara'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 200
+#define RETRO_TAPPPING
diff --git a/keyboards/pinky/4/keymaps/default/keymap.c b/keyboards/pinky/4/keymaps/default/keymap.c
new file mode 100644
index 000000000..ee43194dd
--- /dev/null
+++ b/keyboards/pinky/4/keymaps/default/keymap.c
@@ -0,0 +1,154 @@
+/* Copyright 2018 'Masayuki Sunahara'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST
+};
+
+#define ________ KC_TRNS
+#define XXXXXXXX KC_NO
+#define KC_LOWER LOWER
+#define KC_RAISE RAISE
+#define KC_ADJ   ADJUST
+#define KC_CTLTB CTL_T(KC_TAB)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT( \
+  //,---------------------------------------------------------------------.  ,---------------------------------------------------------------------.
+        KC_ESC,     KC_1,     KC_2,     KC_3,     KC_4,     KC_5,  KC_LPRN,     KC_RPRN,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,  KC_BSPC,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+        KC_TAB,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,  KC_LBRC,     KC_RBRC,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,  KC_BSLS,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      KC_CTLTB,     KC_A,     KC_S,     KC_D,     KC_F,     KC_G,  KC_LCBR,     KC_RCBR,     KC_H,     KC_J,     KC_K,     KC_L,  KC_SCLN,  KC_QUOT,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+       KC_LSFT,     KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,   KC_ADJ,      KC_ADJ,     KC_N,     KC_M,  KC_COMM,   KC_DOT,  KC_SLSH,   KC_ENT,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+                                     KC_LALT, KC_LOWER,  KC_LGUI,   KC_SPC,      KC_SPC,  KC_RGUI, KC_RAISE,  KC_RALT \
+                                //`---------------------------------------'  `---------------------------------------'
+  ),
+
+  [_LOWER] = LAYOUT( \
+  //,---------------------------------------------------------------------.  ,---------------------------------------------------------------------.
+        KC_GRV, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________,  KC_MINS,   KC_EQL, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________, ________, ________, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________, ________, ________, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________, ________, ________, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+                                    ________, ________, ________, ________,    ________, ________, ________, ________ \
+                                //`---------------------------------------'  `---------------------------------------'
+  ),
+
+  [_RAISE] = LAYOUT( \
+  //,---------------------------------------------------------------------.  ,---------------------------------------------------------------------.
+        KC_GRV, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________,  KC_MINS,   KC_EQL, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________, ________, ________, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________, ________, ________, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________, ________, ________, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+                                    ________, ________, ________, ________,    ________, ________, ________, ________ \
+                                //`---------------------------------------'  `---------------------------------------'
+  ),
+
+  [_ADJUST] = LAYOUT( \
+  //,---------------------------------------------------------------------.  ,---------------------------------------------------------------------.
+      ________,    KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5, ________,    ________,    KC_F6,    KC_F7,    KC_F8,    KC_F9,   KC_F10, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________,   KC_F11,   KC_F12, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________, ________, ________, ________, ________, ________, ________,    ________,  KC_HOME,  KC_PGDN,  KC_PGUP,   KC_END, ________, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+      ________, ________, ________, ________, ________, ________, ________,    ________, ________, ________, ________, ________, ________, ________,\
+  //|---------+---------+---------+---------+---------+---------+---------|  |---------+---------+---------+---------+---------+---------+---------|
+                                    ________, ________, ________, ________,    ________, ________, ________, ________ \
+                                //`---------------------------------------'  `---------------------------------------'
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+    // set_timelog();
+  }
+
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+        if (record->event.pressed) {
+          layer_on(_ADJUST);
+        } else {
+          layer_off(_ADJUST);
+        }
+        return false;
+        break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/pinky/4/keymaps/default/rules.mk b/keyboards/pinky/4/keymaps/default/rules.mk
new file mode 100644
index 000000000..176869809
--- /dev/null
+++ b/keyboards/pinky/4/keymaps/default/rules.mk
@@ -0,0 +1,18 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no        # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+SWAP_HANDS_ENABLE = no      # Enable one-hand typing
diff --git a/keyboards/pinky/4/rules.mk b/keyboards/pinky/4/rules.mk
new file mode 100644
index 000000000..1bb8bf6d7
--- /dev/null
+++ b/keyboards/pinky/4/rules.mk
@@ -0,0 +1 @@
+# empty
diff --git a/keyboards/pinky/config.h b/keyboards/pinky/config.h
new file mode 100644
index 000000000..7f0c3c10e
--- /dev/null
+++ b/keyboards/pinky/config.h
@@ -0,0 +1,20 @@
+/*
+Copyright 2018 'Masayuki Sunahara'
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
diff --git a/keyboards/pinky/pinky.c b/keyboards/pinky/pinky.c
new file mode 100644
index 000000000..9b98ea85d
--- /dev/null
+++ b/keyboards/pinky/pinky.c
@@ -0,0 +1,43 @@
+/* Copyright 2018 'Masayuki Sunahara'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "pinky.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/pinky/pinky.h b/keyboards/pinky/pinky.h
new file mode 100644
index 000000000..9cc5d8d58
--- /dev/null
+++ b/keyboards/pinky/pinky.h
@@ -0,0 +1,29 @@
+/* Copyright 2018 'Masayuki Sunahara'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef PINKY_H
+#define PINKY_H
+
+#include "quantum.h"
+
+#ifdef KEYBOARD_pinky_3
+  #include "3.h"
+#endif
+
+#ifdef KEYBOARD_pinky_4
+  #include "4.h"
+#endif
+
+#endif
diff --git a/keyboards/pinky/readme.md b/keyboards/pinky/readme.md
new file mode 100644
index 000000000..f9eb6ee2b
--- /dev/null
+++ b/keyboards/pinky/readme.md
@@ -0,0 +1,25 @@
+Pinky
+===
+
+A split keyboard with 3 or 4 x7 vertically staggered keys and 4 thumb keys.
+An idea is inspired from [crkbd](https://github.com/foostan/crkbd), [Lily58](https://github.com/kata0510/Lily58), [Ergo42](https://github.com/Biacco42/Ergo42) and [Helix](https://github.com/MakotoKurauchi/helix).
+
+Keyboard Maintainer: [Masayuki Sunahara](https://github.com/tamanishi/) [@tamanishi](https://twitter.com/tamanishi)
+Hardware Supported: Pinky3(3rows) or Pinky4(4rows) PCB, Pro Micro
+Hardware Availability: [Pinky3 PCB & Case Data](https://github.com/tamanishi/Pinky3), [Pinky4 PCB & Case Data](https://github.com/tamanishi/Pinky4)
+
+Make example for pinky(3rows) keyboard (after setting up your build environment):
+
+    make pinky:default
+    or
+    make pinky/3:default
+
+Make example for pinky(4rows) keyboard (after setting up your build environment):
+
+    make pinky/4:default
+
+Install example for pinky(3rows) keyboard:
+
+    make pinky:default:avrdude
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/pinky/rules.mk b/keyboards/pinky/rules.mk
new file mode 100644
index 000000000..1c0059d31
--- /dev/null
+++ b/keyboards/pinky/rules.mk
@@ -0,0 +1,85 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+SPLIT_KEYBOARD = yes
+
+DEFAULT_FOLDER = pinky/3