1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
|
/*
ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file STM32/pal_lld.c
* @brief STM32 GPIO low level driver code
* @addtogroup STM32_PAL
* @{
*/
#include <ch.h>
#include <pal.h>
#if defined(STM32F10X_LD)
#define APB2_RST_MASK (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST | \
RCC_APB2RSTR_IOPCRST | RCC_APB2RSTR_IOPDRST | \
RCC_APB2RSTR_AFIORST)
#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
RCC_APB2ENR_AFIOEN)
#elif defined(STM32F10X_HD)
#define APB2_RST_MASK (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST | \
RCC_APB2RSTR_IOPCRST | RCC_APB2RSTR_IOPDRST | \
RCC_APB2RSTR_IOPERST | RCC_APB2RSTR_IOPFRST | \
RCC_APB2RSTR_IOPGRST | RCC_APB2RSTR_AFIORST);
#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
RCC_APB2ENR_IOPEEN | RCC_APB2ENR_IOPFEN | \
RCC_APB2ENR_IOPGEN | RCC_APB2ENR_AFIOEN)
#else
/* Defaults on Medium Density devices.*/
#define APB2_RST_MASK (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST | \
RCC_APB2RSTR_IOPCRST | RCC_APB2RSTR_IOPDRST | \
RCC_APB2RSTR_IOPERST | RCC_APB2RSTR_AFIORST);
#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
RCC_APB2ENR_IOPEEN | RCC_APB2ENR_AFIOEN)
#endif
/**
* @brief STM32 I/O ports configuration.
* @details Ports A-D(E, F, G) clocks enabled, AFIO clock enabled.
*
* @param[in] config the STM32 ports configuration
*/
void _pal_lld_init(const STM32GPIOConfig *config) {
/*
* Enables the GPIO related clocks.
*/
RCC->APB2ENR |= APB2_EN_MASK;
/*
* Resets the GPIO ports and AFIO.
*/
RCC->APB2RSTR = APB2_RST_MASK;
RCC->APB2RSTR = 0;
IOPORT1->ODR = config->PAData.odr;
IOPORT1->CRH = config->PAData.crh;
IOPORT1->CRL = config->PAData.crl;
IOPORT2->ODR = config->PBData.odr;
IOPORT2->CRH = config->PBData.crh;
IOPORT2->CRL = config->PBData.crl;
IOPORT3->ODR = config->PCData.odr;
IOPORT3->CRH = config->PCData.crh;
IOPORT3->CRL = config->PCData.crl;
IOPORT4->ODR = config->PDData.odr;
IOPORT4->CRH = config->PDData.crh;
IOPORT4->CRL = config->PDData.crl;
#if !defined(STM32F10X_LD) || defined(__DOXYGEN__)
IOPORT5->ODR = config->PEData.odr;
IOPORT5->CRH = config->PEData.crh;
IOPORT5->CRL = config->PEData.crl;
#endif
#if defined(STM32F10X_HD) || defined(__DOXYGEN__)
IOPORT6->ODR = config->PFData.odr;
IOPORT6->CRH = config->PFData.crh;
IOPORT6->CRL = config->PFData.crl;
IOPORT7->ODR = config->PGData.odr;
IOPORT7->CRH = config->PGData.crh;
IOPORT7->CRL = config->PGData.crl;
#endif
}
/**
* @brief Pads mode setup.
* @details This function programs a pads group belonging to the same port
* with the specified mode.
*
* @param[in] port the port identifier
* @param[in] mask the group mask
* @param[in] mode the mode
*
* @note This function is not meant to be invoked directly by the application
* code.
* @note @p PAL_MODE_UNCONNECTED is implemented as push pull output at 2MHz.
* @note Writing on pads programmed as pull-up or pull-down has the side
* effect to modify the resistor setting because the output latched data
* is used for the resistor selection.
*/
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
uint_fast8_t mode) {
static const uint8_t cfgtab[] = {
4, /* PAL_MODE_RESET, implemented as input.*/
2, /* PAL_MODE_UNCONNECTED, implemented as push pull output 2MHz.*/
4, /* PAL_MODE_INPUT */
8, /* PAL_MODE_INPUT_PULLUP */
8, /* PAL_MODE_INPUT_PULLDOWN */
3, /* PAL_MODE_OUTPUT_PUSHPULL, 50MHz.*/
7, /* PAL_MODE_OUTPUT_OPENDRAIN, 50MHz.*/
};
uint32_t mh, ml, crh, crl, cfg;
unsigned i;
if (mode == PAL_MODE_INPUT_PULLUP)
port->BSRR = mask;
else if (mode == PAL_MODE_INPUT_PULLDOWN)
port->BRR = mask;
cfg = cfgtab[mode];
mh = ml = crh = crl = 0;
for (i = 0; i < 8; i++) {
ml <<= 4;
mh <<= 4;
crl <<= 4;
crh <<= 4;
if ((mask & 1) == 0)
ml |= 0xf;
else
crl |= cfg;
if ((mask & 0x10000) == 0)
mh |= 0xf;
else
crh |= cfg;
mask >>= 1;
}
port->CRH = (port->CRH & mh) | crh;
port->CRL = (port->CRL & ml) | crl;
}
/** @} */
|