1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
|
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file STM32L1xx/adc_lld.c
* @brief STM32L1xx ADC subsystem low level driver source.
*
* @addtogroup ADC
* @{
*/
#include "hal.h"
#if HAL_USE_ADC || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/** @brief ADC1 driver identifier.*/
#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
ADCDriver ADCD1;
#endif
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief ADC DMA ISR service routine.
*
* @param[in] adcp pointer to the @p ADCDriver object
* @param[in] flags pre-shifted content of the ISR register
*/
static void adc_lld_serve_rx_interrupt(ADCDriver *adcp, uint32_t flags) {
/* DMA errors handling.*/
if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
/* DMA, this could help only if the DMA tries to access an unmapped
address space or violates alignment rules.*/
_adc_isr_error_code(adcp, ADC_ERR_DMAFAILURE);
}
else {
/* It is possible that the conversion group has already be reset by the
ADC error handler, in this case this interrupt is spurious.*/
if (adcp->grpp != NULL) {
if ((flags & STM32_DMA_ISR_TCIF) != 0) {
/* Transfer complete processing.*/
_adc_isr_full_code(adcp);
}
else if ((flags & STM32_DMA_ISR_HTIF) != 0) {
/* Half transfer processing.*/
_adc_isr_half_code(adcp);
}
}
}
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
/**
* @brief ADC interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(Vector88) {
uint32_t sr;
OSAL_IRQ_PROLOGUE();
sr = ADC1->SR;
ADC1->SR = 0;
/* Note, an overflow may occur after the conversion ended before the driver
is able to stop the ADC, this is why the DMA channel is checked too.*/
if ((sr & ADC_SR_OVR) && (dmaStreamGetTransactionSize(ADCD1.dmastp) > 0)) {
/* ADC overflow condition, this could happen only if the DMA is unable
to read data fast enough.*/
if (ADCD1.grpp != NULL)
_adc_isr_error_code(&ADCD1, ADC_ERR_OVERFLOW);
}
/* TODO: Add here analog watchdog handling.*/
OSAL_IRQ_EPILOGUE();
}
#endif
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level ADC driver initialization.
*
* @notapi
*/
void adc_lld_init(void) {
#if STM32_ADC_USE_ADC1
/* Driver initialization.*/
adcObjectInit(&ADCD1);
ADCD1.adc = ADC1;
ADCD1.dmastp = STM32_DMA1_STREAM1;
ADCD1.dmamode = STM32_DMA_CR_PL(STM32_ADC_ADC1_DMA_PRIORITY) |
STM32_DMA_CR_DIR_P2M |
STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD |
STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
#endif
/* The shared vector is initialized on driver initialization and never
disabled.*/
nvicEnableVector(ADC1_IRQn, STM32_ADC_IRQ_PRIORITY);
}
/**
* @brief Configures and activates the ADC peripheral.
*
* @param[in] adcp pointer to the @p ADCDriver object
*
* @notapi
*/
void adc_lld_start(ADCDriver *adcp) {
/* If in stopped state then enables the ADC and DMA clocks.*/
if (adcp->state == ADC_STOP) {
#if STM32_ADC_USE_ADC1
if (&ADCD1 == adcp) {
bool b = dmaStreamAllocate(adcp->dmastp,
STM32_ADC_ADC1_DMA_IRQ_PRIORITY,
(stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
(void *)adcp);
osalDbgAssert(!b, "stream already allocated");
dmaStreamSetPeripheral(adcp->dmastp, &ADC1->DR);
rccEnableADC1(FALSE);
}
#endif /* STM32_ADC_USE_ADC1 */
ADC->CCR = (ADC->CCR & ADC_CCR_TSVREFE) | (STM32_ADC_ADCPRE << 16);
/* ADC initial setup, starting the analog part here in order to reduce
the latency when starting a conversion.*/
adcp->adc->CR1 = 0;
adcp->adc->CR2 = 0;
adcp->adc->CR2 = ADC_CR2_ADON;
}
}
/**
* @brief Deactivates the ADC peripheral.
*
* @param[in] adcp pointer to the @p ADCDriver object
*
* @notapi
*/
void adc_lld_stop(ADCDriver *adcp) {
/* If in ready state then disables the ADC clock and analog part.*/
if (adcp->state == ADC_READY) {
dmaStreamRelease(adcp->dmastp);
adcp->adc->CR1 = 0;
adcp->adc->CR2 = 0;
#if STM32_ADC_USE_ADC1
if (&ADCD1 == adcp)
rccDisableADC1(FALSE);
#endif
}
}
/**
* @brief Starts an ADC conversion.
*
* @param[in] adcp pointer to the @p ADCDriver object
*
* @notapi
*/
void adc_lld_start_conversion(ADCDriver *adcp) {
uint32_t mode;
uint32_t cr2;
const ADCConversionGroup *grpp = adcp->grpp;
/* DMA setup.*/
mode = adcp->dmamode;
if (grpp->circular) {
mode |= STM32_DMA_CR_CIRC;
if (adcp->depth > 1) {
/* If circular buffer depth > 1, then the half transfer interrupt
is enabled in order to allow streaming processing.*/
mode |= STM32_DMA_CR_HTIE;
}
}
dmaStreamSetMemory0(adcp->dmastp, adcp->samples);
dmaStreamSetTransactionSize(adcp->dmastp, (uint32_t)grpp->num_channels *
(uint32_t)adcp->depth);
dmaStreamSetMode(adcp->dmastp, mode);
dmaStreamEnable(adcp->dmastp);
/* ADC setup.*/
adcp->adc->SR = 0;
adcp->adc->SMPR1 = grpp->smpr1;
adcp->adc->SMPR2 = grpp->smpr2;
adcp->adc->SMPR3 = grpp->smpr3;
adcp->adc->SQR1 = grpp->sqr1;
adcp->adc->SQR2 = grpp->sqr2;
adcp->adc->SQR3 = grpp->sqr3;
adcp->adc->SQR4 = grpp->sqr4;
adcp->adc->SQR5 = grpp->sqr5;
/* ADC configuration and start.*/
adcp->adc->CR1 = grpp->cr1 | ADC_CR1_OVRIE | ADC_CR1_SCAN;
/* Enforcing the mandatory bits in CR2.*/
cr2 = grpp->cr2 | ADC_CR2_DMA | ADC_CR2_DDS | ADC_CR2_ADON;
/* The start method is different dependign if HW or SW triggered, the
start is performed using the method specified in the CR2 configuration.*/
if ((cr2 & ADC_CR2_SWSTART) != 0) {
/* Initializing CR2 while keeping ADC_CR2_SWSTART at zero.*/
adcp->adc->CR2 = (cr2 | ADC_CR2_CONT) & ~ADC_CR2_SWSTART;
/* Finally enabling ADC_CR2_SWSTART.*/
adcp->adc->CR2 = (cr2 | ADC_CR2_CONT);
}
else
adcp->adc->CR2 = cr2;
}
/**
* @brief Stops an ongoing conversion.
*
* @param[in] adcp pointer to the @p ADCDriver object
*
* @notapi
*/
void adc_lld_stop_conversion(ADCDriver *adcp) {
dmaStreamDisable(adcp->dmastp);
adcp->adc->CR1 = 0;
adcp->adc->CR2 = 0;
adcp->adc->CR2 = ADC_CR2_ADON;
}
/**
* @brief Enables the TSVREFE bit.
* @details The TSVREFE bit is required in order to sample the internal
* temperature sensor and internal reference voltage.
* @note This is an STM32-only functionality.
*/
void adcSTM32EnableTSVREFE(void) {
ADC->CCR |= ADC_CCR_TSVREFE;
}
/**
* @brief Disables the TSVREFE bit.
* @details The TSVREFE bit is required in order to sample the internal
* temperature sensor and internal reference voltage.
* @note This is an STM32-only functionality.
*/
void adcSTM32DisableTSVREFE(void) {
ADC->CCR &= ~ADC_CCR_TSVREFE;
}
#endif /* HAL_USE_ADC */
/** @} */
|
