blob: 8bcc21085631429faf8db80db56637f22b784393 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
|
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file STM32F4xx/hal_lld.c
* @brief STM32F4xx/STM32F2xx HAL subsystem low level driver source.
*
* @addtogroup HAL
* @{
*/
#include "hal.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/**
* @brief CMSIS system core clock variable.
* @note It is declared in system_stm32f4xx.h.
*/
uint32_t SystemCoreClock = STM32_HCLK;
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief Initializes the backup domain.
* @note WARNING! Changing clock source impossible without resetting
* of the whole BKP domain.
*/
static void hal_lld_backup_domain_init(void) {
/* Backup domain access enabled and left open.*/
PWR->CR |= PWR_CR_DBP;
/* Reset BKP domain if different clock source selected.*/
if ((RCC->BDCR & STM32_RTCSEL_MASK) != STM32_RTCSEL) {
/* Backup domain reset.*/
RCC->BDCR = RCC_BDCR_BDRST;
RCC->BDCR = 0;
}
#if STM32_LSE_ENABLED
#if defined(STM32_LSE_BYPASS)
/* LSE Bypass.*/
RCC->BDCR |= RCC_BDCR_LSEON | RCC_BDCR_LSEBYP;
#else
/* No LSE Bypass.*/
RCC->BDCR |= RCC_BDCR_LSEON;
#endif
while ((RCC->BDCR & RCC_BDCR_LSERDY) == 0)
; /* Waits until LSE is stable. */
#endif
#if HAL_USE_RTC
/* If the backup domain hasn't been initialized yet then proceed with
initialization.*/
if ((RCC->BDCR & RCC_BDCR_RTCEN) == 0) {
/* Selects clock source.*/
RCC->BDCR |= STM32_RTCSEL;
/* RTC clock enabled.*/
RCC->BDCR |= RCC_BDCR_RTCEN;
}
#endif /* HAL_USE_RTC */
#if STM32_BKPRAM_ENABLE
rccEnableBKPSRAM(false);
PWR->CSR |= PWR_CSR_BRE;
while ((PWR->CSR & PWR_CSR_BRR) == 0)
; /* Waits until the regulator is stable */
#else
PWR->CSR &= ~PWR_CSR_BRE;
#endif /* STM32_BKPRAM_ENABLE */
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level HAL driver initialization.
*
* @notapi
*/
void hal_lld_init(void) {
/* Reset of all peripherals. AHB3 is not reseted because it could have
been initialized in the board initialization file (board.c) and AHB2 is not
present in STM32F410. */
rccResetAHB1(~0);
#if !defined(STM32F410xx)
rccResetAHB2(~0);
#endif
rccResetAPB1(~RCC_APB1RSTR_PWRRST);
rccResetAPB2(~0);
/* PWR clock enabled.*/
rccEnablePWRInterface(FALSE);
/* Initializes the backup domain.*/
hal_lld_backup_domain_init();
#if defined(STM32_DMA_REQUIRED)
dmaInit();
#endif
/* Programmable voltage detector enable.*/
#if STM32_PVD_ENABLE
PWR->CR |= PWR_CR_PVDE | (STM32_PLS & STM32_PLS_MASK);
#endif /* STM32_PVD_ENABLE */
}
/**
* @brief STM32F2xx clocks and PLL initialization.
* @note All the involved constants come from the file @p board.h.
* @note This function should be invoked just after the system reset.
*
* @special
*/
void stm32_clock_init(void) {
#if !STM32_NO_INIT
/* PWR clock enable.*/
#if defined(HAL_USE_RTC) && defined(RCC_APB1ENR_RTCAPBEN)
RCC->APB1ENR = RCC_APB1ENR_PWREN | RCC_APB1ENR_RTCAPBEN;
#else
RCC->APB1ENR = RCC_APB1ENR_PWREN;
#endif
/* PWR initialization.*/
#if defined(STM32F4XX) || defined(__DOXYGEN__)
PWR->CR = STM32_VOS;
#else
PWR->CR = 0;
#endif
/* HSI setup, it enforces the reset situation in order to handle possible
problems with JTAG probes and re-initializations.*/
RCC->CR |= RCC_CR_HSION; /* Make sure HSI is ON. */
while (!(RCC->CR & RCC_CR_HSIRDY))
; /* Wait until HSI is stable. */
/* HSI is selected as new source without touching the other fields in
CFGR. Clearing the register has to be postponed after HSI is the
new source.*/
RCC->CFGR &= ~RCC_CFGR_SW; /* Reset SW */
RCC->CFGR |= RCC_CFGR_SWS_HSI; /* Select HSI as internal*/
while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
; /* Wait until HSI is selected. */
/* Registers finally cleared to reset values.*/
RCC->CR &= RCC_CR_HSITRIM | RCC_CR_HSION; /* CR Reset value. */
RCC->CFGR = 0; /* CFGR reset value. */
#if STM32_HSE_ENABLED
/* HSE activation.*/
#if defined(STM32_HSE_BYPASS)
/* HSE Bypass.*/
RCC->CR |= RCC_CR_HSEON | RCC_CR_HSEBYP;
#else
/* No HSE Bypass.*/
RCC->CR |= RCC_CR_HSEON;
#endif
while ((RCC->CR & RCC_CR_HSERDY) == 0)
; /* Waits until HSE is stable. */
#endif
#if STM32_LSI_ENABLED
/* LSI activation.*/
RCC->CSR |= RCC_CSR_LSION;
while ((RCC->CSR & RCC_CSR_LSIRDY) == 0)
; /* Waits until LSI is stable. */
#endif
#if STM32_ACTIVATE_PLL
/* PLL activation.*/
RCC->PLLCFGR = STM32_PLLQ | STM32_PLLSRC | STM32_PLLP | STM32_PLLN |
STM32_PLLM;
RCC->CR |= RCC_CR_PLLON;
/* Synchronization with voltage regulator stabilization.*/
#if defined(STM32F4XX)
while ((PWR->CSR & PWR_CSR_VOSRDY) == 0)
; /* Waits until power regulator is stable. */
#if STM32_OVERDRIVE_REQUIRED
/* Overdrive activation performed after activating the PLL in order to save
time as recommended in RM in "Entering Over-drive mode" paragraph.*/
PWR->CR |= PWR_CR_ODEN;
while (!(PWR->CSR & PWR_CSR_ODRDY))
;
PWR->CR |= PWR_CR_ODSWEN;
while (!(PWR->CSR & PWR_CSR_ODSWRDY))
;
#endif /* STM32_OVERDRIVE_REQUIRED */
#endif /* defined(STM32F4XX) */
/* Waiting for PLL lock.*/
while (!(RCC->CR & RCC_CR_PLLRDY))
;
#endif /* STM32_ACTIVATE_PLL */
#if STM32_ACTIVATE_PLLI2S
/* PLLI2S activation.*/
RCC->PLLI2SCFGR = STM32_PLLI2SR | STM32_PLLI2SN | STM32_PLLI2SP |
STM32_PLLI2SQ | STM32_PLLI2SM;
RCC->CR |= RCC_CR_PLLI2SON;
/* Waiting for PLL lock.*/
while (!(RCC->CR & RCC_CR_PLLI2SRDY))
;
#endif /* STM32_ACTIVATE_PLLI2S */
#if STM32_ACTIVATE_PLLSAI
/* PLLSAI activation.*/
RCC->PLLSAICFGR = STM32_PLLSAIR | STM32_PLLSAIN | STM32_PLLSAIP |
STM32_PLLSAIQ | STM32_PLLSAIM;
RCC->CR |= RCC_CR_PLLSAION;
/* Waiting for PLL lock.*/
while (!(RCC->CR & RCC_CR_PLLSAIRDY))
;
#endif /* STM32_ACTIVATE_PLLSAI */
/* Other clock-related settings (dividers, MCO etc).*/
RCC->CFGR = STM32_MCO2PRE | STM32_MCO2SEL | STM32_MCO1PRE | STM32_MCO1SEL |
STM32_I2SSRC | STM32_RTCPRE | STM32_PPRE2 | STM32_PPRE1 |
STM32_HPRE;
#if defined(STM32F446xx)
/* DCKCFGR register initialization, note, must take care of the _OFF
pseudo settings.*/
{
uint32_t dckcfgr = 0;
#if STM32_SAI2SEL != STM32_SAI2SEL_OFF
dckcfgr |= STM32_SAI2SEL;
#endif
#if STM32_SAI1SEL != STM32_SAI1SEL_OFF
dckcfgr |= STM32_SAI1SEL;
#endif
#if STM32_PLLSAIDIVR != STM32_PLLSAIDIVR_OFF
dckcfgr |= STM32_PLLSAIDIVR;
#endif
RCC->DCKCFGR = dckcfgr | STM32_PLLI2SDIVQ | STM32_PLLSAIDIVQ;
}
RCC->DCKCFGR2 = STM32_CK48MSEL;
#elif defined(STM32F469xx) || defined(STM32F479xx)
/* DCKCFGR register initialization, note, must take care of the _OFF
pseudo settings.*/
{
uint32_t dckcfgr = 0;
#if STM32_SAI2SEL != STM32_SAI2SEL_OFF
dckcfgr |= STM32_SAI2SEL;
#endif
#if STM32_SAI1SEL != STM32_SAI1SEL_OFF
dckcfgr |= STM32_SAI1SEL;
#endif
#if STM32_PLLSAIDIVR != STM32_PLLSAIDIVR_OFF
dckcfgr |= STM32_PLLSAIDIVR;
#endif
RCC->DCKCFGR = dckcfgr | STM32_PLLI2SDIVQ | STM32_PLLSAIDIVQ |
STM32_CK48MSEL;
}
#endif
/* Flash setup.*/
#if !defined(STM32_REMOVE_REVISION_A_FIX)
/* Some old revisions of F4x MCUs randomly crashes with compiler
optimizations enabled AND flash caches enabled. */
if ((DBGMCU->IDCODE == 0x20006411) && (SCB->CPUID == 0x410FC241))
FLASH->ACR = FLASH_ACR_PRFTEN | STM32_FLASHBITS;
else
FLASH->ACR = FLASH_ACR_PRFTEN | FLASH_ACR_ICEN |
FLASH_ACR_DCEN | STM32_FLASHBITS;
#else
FLASH->ACR = FLASH_ACR_PRFTEN | FLASH_ACR_ICEN |
FLASH_ACR_DCEN | STM32_FLASHBITS;
#endif
/* Switching to the configured clock source if it is different from HSI.*/
#if (STM32_SW != STM32_SW_HSI)
RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */
while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
;
#endif
#endif /* STM32_NO_INIT */
/* SYSCFG clock enabled here because it is a multi-functional unit shared
among multiple drivers.*/
rccEnableAPB2(RCC_APB2ENR_SYSCFGEN, TRUE);
}
/** @} */
|