1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
|
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file USBv1/hal_usb_lld.c
* @brief STM32 USB subsystem low level driver source.
*
* @addtogroup USB
* @{
*/
#include <string.h>
#include "hal.h"
#if HAL_USE_USB || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
#define BTABLE_ADDR 0x0000
#define EPR_EP_TYPE_IS_ISO(bits) ((bits & EPR_EP_TYPE_MASK) == EPR_EP_TYPE_ISO)
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/** @brief USB1 driver identifier.*/
#if STM32_USB_USE_USB1 || defined(__DOXYGEN__)
USBDriver USBD1;
#endif
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/**
* @brief EP0 state.
* @note It is an union because IN and OUT endpoints are never used at the
* same time for EP0.
*/
static union {
/**
* @brief IN EP0 state.
*/
USBInEndpointState in;
/**
* @brief OUT EP0 state.
*/
USBOutEndpointState out;
} ep0_state;
/**
* @brief Buffer for the EP0 setup packets.
*/
static uint8_t ep0setup_buffer[8];
/**
* @brief EP0 initialization structure.
*/
static const USBEndpointConfig ep0config = {
USB_EP_MODE_TYPE_CTRL,
_usb_ep0setup,
_usb_ep0in,
_usb_ep0out,
0x40,
0x40,
&ep0_state.in,
&ep0_state.out,
1,
ep0setup_buffer
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief Resets the packet memory allocator.
*
* @param[in] usbp pointer to the @p USBDriver object
*/
static void usb_pm_reset(USBDriver *usbp) {
/* The first 64 bytes are reserved for the descriptors table. The effective
available RAM for endpoint buffers is just 448 bytes.*/
usbp->pmnext = 64;
}
/**
* @brief Resets the packet memory allocator.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] size size of the packet buffer to allocate
* @return The packet buffer address.
*/
static uint32_t usb_pm_alloc(USBDriver *usbp, size_t size) {
uint32_t next;
next = usbp->pmnext;
usbp->pmnext += (size + 1) & ~1;
osalDbgAssert(usbp->pmnext <= STM32_USB_PMA_SIZE, "PMA overflow");
return next;
}
/**
* @brief Reads from a dedicated packet buffer.
*
* @param[in] ep endpoint number
* @param[out] buf buffer where to copy the packet data
* @return The size of the receivee packet.
*
* @notapi
*/
static size_t usb_packet_read_to_buffer(usbep_t ep, uint8_t *buf) {
size_t i, n;
stm32_usb_descriptor_t *udp = USB_GET_DESCRIPTOR(ep);
stm32_usb_pma_t *pmap = USB_ADDR2PTR(udp->RXADDR0);
#if STM32_USB_USE_ISOCHRONOUS
uint32_t epr = STM32_USB->EPR[ep];
/* Double buffering is always enabled for isochronous endpoints, and
although we overlap the two buffers for simplicity, we still need
to read from the right counter. The DTOG_RX bit indicates the buffer
that is currently in use by the USB peripheral, that is, the buffer
in which the next received packet will be stored, so we need to
read the counter of the OTHER buffer, which is where the last
received packet was stored.*/
if (EPR_EP_TYPE_IS_ISO(epr) && !(epr & EPR_DTOG_RX))
n = (size_t)udp->RXCOUNT1 & RXCOUNT_COUNT_MASK;
else
n = (size_t)udp->RXCOUNT0 & RXCOUNT_COUNT_MASK;
#else
n = (size_t)udp->RXCOUNT0 & RXCOUNT_COUNT_MASK;
#endif
i = n;
#if STM32_USB_USE_FAST_COPY
while (i >= 16) {
uint32_t w;
w = *(pmap + 0);
*(buf + 0) = (uint8_t)w;
*(buf + 1) = (uint8_t)(w >> 8);
w = *(pmap + 1);
*(buf + 2) = (uint8_t)w;
*(buf + 3) = (uint8_t)(w >> 8);
w = *(pmap + 2);
*(buf + 4) = (uint8_t)w;
*(buf + 5) = (uint8_t)(w >> 8);
w = *(pmap + 3);
*(buf + 6) = (uint8_t)w;
*(buf + 7) = (uint8_t)(w >> 8);
w = *(pmap + 4);
*(buf + 8) = (uint8_t)w;
*(buf + 9) = (uint8_t)(w >> 8);
w = *(pmap + 5);
*(buf + 10) = (uint8_t)w;
*(buf + 11) = (uint8_t)(w >> 8);
w = *(pmap + 6);
*(buf + 12) = (uint8_t)w;
*(buf + 13) = (uint8_t)(w >> 8);
w = *(pmap + 7);
*(buf + 14) = (uint8_t)w;
*(buf + 15) = (uint8_t)(w >> 8);
i -= 16;
buf += 16;
pmap += 8;
}
#endif /* STM32_USB_USE_FAST_COPY */
while (i >= 2) {
uint32_t w = *pmap++;
*buf++ = (uint8_t)w;
*buf++ = (uint8_t)(w >> 8);
i -= 2;
}
if (i >= 1) {
*buf = (uint8_t)*pmap;
}
return n;
}
/**
* @brief Writes to a dedicated packet buffer.
*
* @param[in] ep endpoint number
* @param[in] buf buffer where to fetch the packet data
* @param[in] n maximum number of bytes to copy. This value must
* not exceed the maximum packet size for this endpoint.
*
* @notapi
*/
static void usb_packet_write_from_buffer(usbep_t ep,
const uint8_t *buf,
size_t n) {
stm32_usb_descriptor_t *udp = USB_GET_DESCRIPTOR(ep);
stm32_usb_pma_t *pmap = USB_ADDR2PTR(udp->TXADDR0);
int i = (int)n;
#if STM32_USB_USE_ISOCHRONOUS
uint32_t epr = STM32_USB->EPR[ep];
/* Double buffering is always enabled for isochronous endpoints, and
although we overlap the two buffers for simplicity, we still need
to write to the right counter. The DTOG_TX bit indicates the buffer
that is currently in use by the USB peripheral, that is, the buffer
from which the next packet will be sent, so we need to write the
counter of that buffer.*/
if (EPR_EP_TYPE_IS_ISO(epr) && (epr & EPR_DTOG_TX))
udp->TXCOUNT1 = (stm32_usb_pma_t)n;
else
udp->TXCOUNT0 = (stm32_usb_pma_t)n;
#else
udp->TXCOUNT0 = (stm32_usb_pma_t)n;
#endif
#if STM32_USB_USE_FAST_COPY
while (i >= 16) {
uint32_t w;
w = *(buf + 0);
w |= *(buf + 1) << 8;
*(pmap + 0) = (stm32_usb_pma_t)w;
w = *(buf + 2);
w |= *(buf + 3) << 8;
*(pmap + 1) = (stm32_usb_pma_t)w;
w = *(buf + 4);
w |= *(buf + 5) << 8;
*(pmap + 2) = (stm32_usb_pma_t)w;
w = *(buf + 6);
w |= *(buf + 7) << 8;
*(pmap + 3) = (stm32_usb_pma_t)w;
w = *(buf + 8);
w |= *(buf + 9) << 8;
*(pmap + 4) = (stm32_usb_pma_t)w;
w = *(buf + 10);
w |= *(buf + 11) << 8;
*(pmap + 5) = (stm32_usb_pma_t)w;
w = *(buf + 12);
w |= *(buf + 13) << 8;
*(pmap + 6) = (stm32_usb_pma_t)w;
w = *(buf + 14);
w |= *(buf + 15) << 8;
*(pmap + 7) = (stm32_usb_pma_t)w;
i -= 16;
buf += 16;
pmap += 8;
}
#endif /* STM32_USB_USE_FAST_COPY */
while (i > 0) {
uint32_t w;
w = *buf++;
w |= *buf++ << 8;
*pmap++ = (stm32_usb_pma_t)w;
i -= 2;
}
}
/**
* @brief Common ISR code, serves the EP-related interrupts.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
static void usb_serve_endpoints(USBDriver *usbp, uint32_t ep) {
size_t n;
uint32_t epr = STM32_USB->EPR[ep];
const USBEndpointConfig *epcp = usbp->epc[ep];
if (epr & EPR_CTR_TX) {
/* IN endpoint, transmission.*/
USBInEndpointState *isp = epcp->in_state;
EPR_CLEAR_CTR_TX(ep);
isp->txcnt += isp->txlast;
n = isp->txsize - isp->txcnt;
if (n > 0) {
/* Transfer not completed, there are more packets to send.*/
if (n > epcp->in_maxsize)
n = epcp->in_maxsize;
/* Writes the packet from the defined buffer.*/
isp->txbuf += isp->txlast;
isp->txlast = n;
usb_packet_write_from_buffer(ep, isp->txbuf, n);
/* Starting IN operation.*/
EPR_SET_STAT_TX(ep, EPR_STAT_TX_VALID);
}
else {
/* Transfer completed, invokes the callback.*/
_usb_isr_invoke_in_cb(usbp, ep);
}
}
if (epr & EPR_CTR_RX) {
/* OUT endpoint, receive.*/
EPR_CLEAR_CTR_RX(ep);
if (epr & EPR_SETUP) {
/* Setup packets handling, setup packets are handled using a
specific callback.*/
_usb_isr_invoke_setup_cb(usbp, ep);
}
else {
USBOutEndpointState *osp = epcp->out_state;
/* Reads the packet into the defined buffer.*/
n = usb_packet_read_to_buffer(ep, osp->rxbuf);
osp->rxbuf += n;
/* Transaction data updated.*/
osp->rxcnt += n;
osp->rxsize -= n;
osp->rxpkts -= 1;
/* The transaction is completed if the specified number of packets
has been received or the current packet is a short packet.*/
if ((n < epcp->out_maxsize) || (osp->rxpkts == 0)) {
/* Transfer complete, invokes the callback.*/
_usb_isr_invoke_out_cb(usbp, ep);
}
else {
/* Transfer not complete, there are more packets to receive.*/
EPR_SET_STAT_RX(ep, EPR_STAT_RX_VALID);
}
}
}
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if STM32_USB_USE_USB1 || defined(__DOXYGEN__)
#if STM32_USB1_HP_NUMBER != STM32_USB1_LP_NUMBER
#if STM32_USB_USE_ISOCHRONOUS
/**
* @brief USB high priority interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_USB1_HP_HANDLER) {
uint32_t istr;
USBDriver *usbp = &USBD1;
OSAL_IRQ_PROLOGUE();
/* Endpoint events handling.*/
istr = STM32_USB->ISTR;
while (istr & ISTR_CTR) {
usb_serve_endpoints(usbp, istr & ISTR_EP_ID_MASK);
istr = STM32_USB->ISTR;
}
OSAL_IRQ_EPILOGUE();
}
#endif /* STM32_USB_USE_ISOCHRONOUS */
#endif /* STM32_USB1_LP_NUMBER != STM32_USB1_HP_NUMBER */
/**
* @brief USB low priority interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_USB1_LP_HANDLER) {
uint32_t istr;
USBDriver *usbp = &USBD1;
OSAL_IRQ_PROLOGUE();
istr = STM32_USB->ISTR;
/* USB bus reset condition handling.*/
if (istr & ISTR_RESET) {
STM32_USB->ISTR = ~ISTR_RESET;
_usb_reset(usbp);
}
/* USB bus SUSPEND condition handling.*/
if (istr & ISTR_SUSP) {
STM32_USB->CNTR |= CNTR_FSUSP;
#if STM32_USB_LOW_POWER_ON_SUSPEND
STM32_USB->CNTR |= CNTR_LP_MODE;
#endif
STM32_USB->ISTR = ~ISTR_SUSP;
_usb_suspend(usbp);
}
/* USB bus WAKEUP condition handling.*/
if (istr & ISTR_WKUP) {
uint32_t fnr = STM32_USB->FNR;
if (!(fnr & FNR_RXDP)) {
STM32_USB->CNTR &= ~CNTR_FSUSP;
_usb_wakeup(usbp);
}
#if STM32_USB_LOW_POWER_ON_SUSPEND
else {
/* Just noise, going back in SUSPEND mode, reference manual 22.4.5,
table 169.*/
STM32_USB->CNTR |= CNTR_LP_MODE;
}
#endif
STM32_USB->ISTR = ~ISTR_WKUP;
}
/* SOF handling.*/
if (istr & ISTR_SOF) {
_usb_isr_invoke_sof_cb(usbp);
STM32_USB->ISTR = ~ISTR_SOF;
}
/* Endpoint events handling.*/
while (istr & ISTR_CTR) {
usb_serve_endpoints(usbp, istr & ISTR_EP_ID_MASK);
istr = STM32_USB->ISTR;
}
OSAL_IRQ_EPILOGUE();
}
#endif /* STM32_USB_USE_USB1 */
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level USB driver initialization.
*
* @notapi
*/
void usb_lld_init(void) {
/* Driver initialization.*/
usbObjectInit(&USBD1);
}
/**
* @brief Configures and activates the USB peripheral.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
void usb_lld_start(USBDriver *usbp) {
if (usbp->state == USB_STOP) {
/* Clock activation.*/
#if STM32_USB_USE_USB1
if (&USBD1 == usbp) {
/* USB clock enabled.*/
rccEnableUSB(false);
/* Powers up the transceiver while holding the USB in reset state.*/
STM32_USB->CNTR = CNTR_FRES;
/* Enabling the USB IRQ vectors, this also gives enough time to allow
the transceiver power up (1uS).*/
#if STM32_USB1_HP_NUMBER != STM32_USB1_LP_NUMBER
nvicEnableVector(STM32_USB1_HP_NUMBER, STM32_USB_USB1_HP_IRQ_PRIORITY);
#endif
nvicEnableVector(STM32_USB1_LP_NUMBER, STM32_USB_USB1_LP_IRQ_PRIORITY);
/* Releases the USB reset.*/
STM32_USB->CNTR = 0;
}
#endif
/* Reset procedure enforced on driver start.*/
usb_lld_reset(usbp);
}
}
/**
* @brief Deactivates the USB peripheral.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
void usb_lld_stop(USBDriver *usbp) {
/* If in ready state then disables the USB clock.*/
if (usbp->state == USB_STOP) {
#if STM32_USB_USE_USB1
if (&USBD1 == usbp) {
#if STM32_USB1_HP_NUMBER != STM32_USB1_LP_NUMBER
nvicDisableVector(STM32_USB1_HP_NUMBER);
#endif
nvicDisableVector(STM32_USB1_LP_NUMBER);
STM32_USB->CNTR = CNTR_PDWN | CNTR_FRES;
rccDisableUSB();
}
#endif
}
}
/**
* @brief USB low level reset routine.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
void usb_lld_reset(USBDriver *usbp) {
uint32_t cntr;
/* Post reset initialization.*/
STM32_USB->BTABLE = BTABLE_ADDR;
STM32_USB->ISTR = 0;
STM32_USB->DADDR = DADDR_EF;
cntr = /*CNTR_ESOFM | */ CNTR_RESETM | CNTR_SUSPM |
CNTR_WKUPM | /*CNTR_ERRM | CNTR_PMAOVRM |*/ CNTR_CTRM;
/* The SOF interrupt is only enabled if a callback is defined for
this service because it is an high rate source.*/
if (usbp->config->sof_cb != NULL)
cntr |= CNTR_SOFM;
STM32_USB->CNTR = cntr;
/* Resets the packet memory allocator.*/
usb_pm_reset(usbp);
/* EP0 initialization.*/
usbp->epc[0] = &ep0config;
usb_lld_init_endpoint(usbp, 0);
}
/**
* @brief Sets the USB address.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
void usb_lld_set_address(USBDriver *usbp) {
STM32_USB->DADDR = (uint32_t)(usbp->address) | DADDR_EF;
}
/**
* @brief Enables an endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep) {
uint16_t epr;
stm32_usb_descriptor_t *dp;
const USBEndpointConfig *epcp = usbp->epc[ep];
/* Setting the endpoint type. Note that isochronous endpoints cannot be
bidirectional because it uses double buffering and both transmit and
receive descriptor fields are used for either direction.*/
switch (epcp->ep_mode & USB_EP_MODE_TYPE) {
case USB_EP_MODE_TYPE_ISOC:
#if STM32_USB_USE_ISOCHRONOUS
osalDbgAssert((epcp->in_state == NULL) || (epcp->out_state == NULL),
"isochronous EP cannot be IN and OUT");
epr = EPR_EP_TYPE_ISO;
break;
#else
osalDbgAssert(false, "isochronous support disabled");
#endif
case USB_EP_MODE_TYPE_BULK:
epr = EPR_EP_TYPE_BULK;
break;
case USB_EP_MODE_TYPE_INTR:
epr = EPR_EP_TYPE_INTERRUPT;
break;
default:
epr = EPR_EP_TYPE_CONTROL;
}
dp = USB_GET_DESCRIPTOR(ep);
/* IN endpoint handling.*/
if (epcp->in_state != NULL) {
dp->TXCOUNT0 = 0;
dp->TXADDR0 = usb_pm_alloc(usbp, epcp->in_maxsize);
#if STM32_USB_USE_ISOCHRONOUS
if (epr == EPR_EP_TYPE_ISO) {
epr |= EPR_STAT_TX_VALID;
dp->TXCOUNT1 = dp->TXCOUNT0;
dp->TXADDR1 = dp->TXADDR0; /* Both buffers overlapped.*/
}
else {
epr |= EPR_STAT_TX_NAK;
}
#else
epr |= EPR_STAT_TX_NAK;
#endif
}
/* OUT endpoint handling.*/
if (epcp->out_state != NULL) {
uint16_t nblocks;
/* Endpoint size and address initialization.*/
if (epcp->out_maxsize > 62)
nblocks = (((((epcp->out_maxsize - 1) | 0x1f) + 1) / 32) << 10) |
0x8000;
else
nblocks = ((((epcp->out_maxsize - 1) | 1) + 1) / 2) << 10;
dp->RXCOUNT0 = nblocks;
dp->RXADDR0 = usb_pm_alloc(usbp, epcp->out_maxsize);
#if STM32_USB_USE_ISOCHRONOUS
if (epr == EPR_EP_TYPE_ISO) {
epr |= EPR_STAT_RX_VALID;
dp->RXCOUNT1 = dp->RXCOUNT0;
dp->RXADDR1 = dp->RXADDR0; /* Both buffers overlapped.*/
}
else {
epr |= EPR_STAT_RX_NAK;
}
#else
epr |= EPR_STAT_RX_NAK;
#endif
}
/* EPxR register setup.*/
EPR_SET(ep, epr | ep);
EPR_TOGGLE(ep, epr);
}
/**
* @brief Disables all the active endpoints except the endpoint zero.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
void usb_lld_disable_endpoints(USBDriver *usbp) {
unsigned i;
/* Resets the packet memory allocator.*/
usb_pm_reset(usbp);
/* Disabling all endpoints.*/
for (i = 1; i <= USB_ENDOPOINTS_NUMBER; i++) {
EPR_TOGGLE(i, 0);
EPR_SET(i, 0);
}
}
/**
* @brief Returns the status of an OUT endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @return The endpoint status.
* @retval EP_STATUS_DISABLED The endpoint is not active.
* @retval EP_STATUS_STALLED The endpoint is stalled.
* @retval EP_STATUS_ACTIVE The endpoint is active.
*
* @notapi
*/
usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep) {
(void)usbp;
switch (STM32_USB->EPR[ep] & EPR_STAT_RX_MASK) {
case EPR_STAT_RX_DIS:
return EP_STATUS_DISABLED;
case EPR_STAT_RX_STALL:
return EP_STATUS_STALLED;
default:
return EP_STATUS_ACTIVE;
}
}
/**
* @brief Returns the status of an IN endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @return The endpoint status.
* @retval EP_STATUS_DISABLED The endpoint is not active.
* @retval EP_STATUS_STALLED The endpoint is stalled.
* @retval EP_STATUS_ACTIVE The endpoint is active.
*
* @notapi
*/
usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep) {
(void)usbp;
switch (STM32_USB->EPR[ep] & EPR_STAT_TX_MASK) {
case EPR_STAT_TX_DIS:
return EP_STATUS_DISABLED;
case EPR_STAT_TX_STALL:
return EP_STATUS_STALLED;
default:
return EP_STATUS_ACTIVE;
}
}
/**
* @brief Reads a setup packet from the dedicated packet buffer.
* @details This function must be invoked in the context of the @p setup_cb
* callback in order to read the received setup packet.
* @pre In order to use this function the endpoint must have been
* initialized as a control endpoint.
* @post The endpoint is ready to accept another packet.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @param[out] buf buffer where to copy the packet data
*
* @notapi
*/
void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf) {
stm32_usb_pma_t *pmap;
stm32_usb_descriptor_t *udp;
uint32_t n;
(void)usbp;
udp = USB_GET_DESCRIPTOR(ep);
pmap = USB_ADDR2PTR(udp->RXADDR0);
for (n = 0; n < 4; n++) {
*(uint16_t *)buf = (uint16_t)*pmap++;
buf += 2;
}
}
/**
* @brief Starts a receive operation on an OUT endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
void usb_lld_start_out(USBDriver *usbp, usbep_t ep) {
USBOutEndpointState *osp = usbp->epc[ep]->out_state;
/* Transfer initialization.*/
if (osp->rxsize == 0) /* Special case for zero sized packets.*/
osp->rxpkts = 1;
else
osp->rxpkts = (uint16_t)((osp->rxsize + usbp->epc[ep]->out_maxsize - 1) /
usbp->epc[ep]->out_maxsize);
EPR_SET_STAT_RX(ep, EPR_STAT_RX_VALID);
}
/**
* @brief Starts a transmit operation on an IN endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
void usb_lld_start_in(USBDriver *usbp, usbep_t ep) {
size_t n;
USBInEndpointState *isp = usbp->epc[ep]->in_state;
/* Transfer initialization.*/
n = isp->txsize;
if (n > (size_t)usbp->epc[ep]->in_maxsize)
n = (size_t)usbp->epc[ep]->in_maxsize;
isp->txlast = n;
usb_packet_write_from_buffer(ep, isp->txbuf, n);
EPR_SET_STAT_TX(ep, EPR_STAT_TX_VALID);
}
/**
* @brief Brings an OUT endpoint in the stalled state.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
void usb_lld_stall_out(USBDriver *usbp, usbep_t ep) {
(void)usbp;
EPR_SET_STAT_RX(ep, EPR_STAT_RX_STALL);
}
/**
* @brief Brings an IN endpoint in the stalled state.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
void usb_lld_stall_in(USBDriver *usbp, usbep_t ep) {
(void)usbp;
EPR_SET_STAT_TX(ep, EPR_STAT_TX_STALL);
}
/**
* @brief Brings an OUT endpoint in the active state.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
void usb_lld_clear_out(USBDriver *usbp, usbep_t ep) {
(void)usbp;
/* Makes sure to not put to NAK an endpoint that is already
transferring.*/
if ((STM32_USB->EPR[ep] & EPR_STAT_RX_MASK) != EPR_STAT_RX_VALID)
EPR_SET_STAT_TX(ep, EPR_STAT_RX_NAK);
}
/**
* @brief Brings an IN endpoint in the active state.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
void usb_lld_clear_in(USBDriver *usbp, usbep_t ep) {
(void)usbp;
/* Makes sure to not put to NAK an endpoint that is already
transferring.*/
if ((STM32_USB->EPR[ep] & EPR_STAT_TX_MASK) != EPR_STAT_TX_VALID)
EPR_SET_STAT_TX(ep, EPR_STAT_TX_NAK);
}
#endif /* HAL_USE_USB */
/** @} */
|