1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
|
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file OTGv1/hal_usb_lld.c
* @brief STM32 USB subsystem low level driver source.
*
* @addtogroup USB
* @{
*/
#include <string.h>
#include "hal.h"
#if HAL_USE_USB || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
#define TRDT_VALUE_FS 5
#define TRDT_VALUE_HS 9
#define EP0_MAX_INSIZE 64
#define EP0_MAX_OUTSIZE 64
#if STM32_OTG_STEPPING == 1
#if defined(BOARD_OTG_NOVBUSSENS)
#define GCCFG_INIT_VALUE (GCCFG_NOVBUSSENS | GCCFG_VBUSASEN | \
GCCFG_VBUSBSEN | GCCFG_PWRDWN)
#else
#define GCCFG_INIT_VALUE (GCCFG_VBUSASEN | GCCFG_VBUSBSEN | \
GCCFG_PWRDWN)
#endif
#elif STM32_OTG_STEPPING == 2
#if defined(BOARD_OTG_NOVBUSSENS)
#define GCCFG_INIT_VALUE GCCFG_PWRDWN
#else
#define GCCFG_INIT_VALUE (GCCFG_VBDEN | GCCFG_PWRDWN)
#endif
#endif
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/** @brief OTG_FS driver identifier.*/
#if STM32_USB_USE_OTG1 || defined(__DOXYGEN__)
USBDriver USBD1;
#endif
/** @brief OTG_HS driver identifier.*/
#if STM32_USB_USE_OTG2 || defined(__DOXYGEN__)
USBDriver USBD2;
#endif
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/**
* @brief EP0 state.
* @note It is an union because IN and OUT endpoints are never used at the
* same time for EP0.
*/
static union {
/**
* @brief IN EP0 state.
*/
USBInEndpointState in;
/**
* @brief OUT EP0 state.
*/
USBOutEndpointState out;
} ep0_state;
/**
* @brief Buffer for the EP0 setup packets.
*/
static uint8_t ep0setup_buffer[8];
/**
* @brief EP0 initialization structure.
*/
static const USBEndpointConfig ep0config = {
USB_EP_MODE_TYPE_CTRL,
_usb_ep0setup,
_usb_ep0in,
_usb_ep0out,
0x40,
0x40,
&ep0_state.in,
&ep0_state.out,
1,
ep0setup_buffer
};
#if STM32_USB_USE_OTG1
static const stm32_otg_params_t fsparams = {
STM32_USB_OTG1_RX_FIFO_SIZE / 4,
STM32_OTG1_FIFO_MEM_SIZE,
STM32_OTG1_ENDPOINTS
};
#endif
#if STM32_USB_USE_OTG2
static const stm32_otg_params_t hsparams = {
STM32_USB_OTG2_RX_FIFO_SIZE / 4,
STM32_OTG2_FIFO_MEM_SIZE,
STM32_OTG2_ENDPOINTS
};
#endif
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
static void otg_core_reset(USBDriver *usbp) {
stm32_otg_t *otgp = usbp->otg;
osalSysPolledDelayX(32);
/* Core reset and delay of at least 3 PHY cycles.*/
otgp->GRSTCTL = GRSTCTL_CSRST;
while ((otgp->GRSTCTL & GRSTCTL_CSRST) != 0)
;
osalSysPolledDelayX(18);
/* Wait AHB idle condition.*/
while ((otgp->GRSTCTL & GRSTCTL_AHBIDL) == 0)
;
}
static void otg_disable_ep(USBDriver *usbp) {
stm32_otg_t *otgp = usbp->otg;
unsigned i;
for (i = 0; i <= usbp->otgparams->num_endpoints; i++) {
otgp->ie[i].DIEPCTL = 0;
otgp->ie[i].DIEPTSIZ = 0;
otgp->ie[i].DIEPINT = 0xFFFFFFFF;
otgp->oe[i].DOEPCTL = 0;
otgp->oe[i].DOEPTSIZ = 0;
otgp->oe[i].DOEPINT = 0xFFFFFFFF;
}
otgp->DAINTMSK = DAINTMSK_OEPM(0) | DAINTMSK_IEPM(0);
}
static void otg_rxfifo_flush(USBDriver *usbp) {
stm32_otg_t *otgp = usbp->otg;
otgp->GRSTCTL = GRSTCTL_RXFFLSH;
while ((otgp->GRSTCTL & GRSTCTL_RXFFLSH) != 0)
;
/* Wait for 3 PHY Clocks.*/
osalSysPolledDelayX(18);
}
static void otg_txfifo_flush(USBDriver *usbp, uint32_t fifo) {
stm32_otg_t *otgp = usbp->otg;
otgp->GRSTCTL = GRSTCTL_TXFNUM(fifo) | GRSTCTL_TXFFLSH;
while ((otgp->GRSTCTL & GRSTCTL_TXFFLSH) != 0)
;
/* Wait for 3 PHY Clocks.*/
osalSysPolledDelayX(18);
}
/**
* @brief Resets the FIFO RAM memory allocator.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
static void otg_ram_reset(USBDriver *usbp) {
usbp->pmnext = usbp->otgparams->rx_fifo_size;
}
/**
* @brief Allocates a block from the FIFO RAM memory.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] size size of the packet buffer to allocate in words
*
* @notapi
*/
static uint32_t otg_ram_alloc(USBDriver *usbp, size_t size) {
uint32_t next;
next = usbp->pmnext;
usbp->pmnext += size;
osalDbgAssert(usbp->pmnext <= usbp->otgparams->otg_ram_size,
"OTG FIFO memory overflow");
return next;
}
/**
* @brief Writes to a TX FIFO.
*
* @param[in] fifop pointer to the FIFO register
* @param[in] buf buffer where to copy the endpoint data
* @param[in] n maximum number of bytes to copy
*
* @notapi
*/
static void otg_fifo_write_from_buffer(volatile uint32_t *fifop,
const uint8_t *buf,
size_t n) {
osalDbgAssert(n > 0, "is zero");
while (true) {
*fifop = *((uint32_t *)buf);
if (n <= 4) {
break;
}
n -= 4;
buf += 4;
}
}
/**
* @brief Reads a packet from the RXFIFO.
*
* @param[in] fifop pointer to the FIFO register
* @param[out] buf buffer where to copy the endpoint data
* @param[in] n number of bytes to pull from the FIFO
* @param[in] max number of bytes to copy into the buffer
*
* @notapi
*/
static void otg_fifo_read_to_buffer(volatile uint32_t *fifop,
uint8_t *buf,
size_t n,
size_t max) {
uint32_t w = 0;
size_t i = 0;
while (i < n) {
if ((i & 3) == 0){
w = *fifop;
}
if (i < max) {
*buf++ = (uint8_t)w;
w >>= 8;
}
i++;
}
}
/**
* @brief Incoming packets handler.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
static void otg_rxfifo_handler(USBDriver *usbp) {
uint32_t sts, cnt, ep;
sts = usbp->otg->GRXSTSP;
switch (sts & GRXSTSP_PKTSTS_MASK) {
case GRXSTSP_SETUP_COMP:
break;
case GRXSTSP_SETUP_DATA:
cnt = (sts & GRXSTSP_BCNT_MASK) >> GRXSTSP_BCNT_OFF;
ep = (sts & GRXSTSP_EPNUM_MASK) >> GRXSTSP_EPNUM_OFF;
otg_fifo_read_to_buffer(usbp->otg->FIFO[0], usbp->epc[ep]->setup_buf,
cnt, 8);
break;
case GRXSTSP_OUT_DATA:
cnt = (sts & GRXSTSP_BCNT_MASK) >> GRXSTSP_BCNT_OFF;
if (cnt == 0) {
asm ("nop");
}
ep = (sts & GRXSTSP_EPNUM_MASK) >> GRXSTSP_EPNUM_OFF;
otg_fifo_read_to_buffer(usbp->otg->FIFO[0],
usbp->epc[ep]->out_state->rxbuf,
cnt,
usbp->epc[ep]->out_state->rxsize -
usbp->epc[ep]->out_state->rxcnt);
usbp->epc[ep]->out_state->rxbuf += cnt;
usbp->epc[ep]->out_state->rxcnt += cnt;
break;
case GRXSTSP_OUT_GLOBAL_NAK:
case GRXSTSP_OUT_COMP:
default:
;
}
}
/**
* @brief Outgoing packets handler.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
static bool otg_txfifo_handler(USBDriver *usbp, usbep_t ep) {
/* The TXFIFO is filled until there is space and data to be transmitted.*/
while (true) {
uint32_t n;
/* Transaction end condition.*/
if (usbp->epc[ep]->in_state->txcnt >= usbp->epc[ep]->in_state->txsize)
return true;
/* Number of bytes remaining in current transaction.*/
n = usbp->epc[ep]->in_state->txsize - usbp->epc[ep]->in_state->txcnt;
if (n > usbp->epc[ep]->in_maxsize)
n = usbp->epc[ep]->in_maxsize;
/* Checks if in the TXFIFO there is enough space to accommodate the
next packet.*/
if (((usbp->otg->ie[ep].DTXFSTS & DTXFSTS_INEPTFSAV_MASK) * 4) < n)
return false;
#if STM32_USB_OTGFIFO_FILL_BASEPRI
__set_BASEPRI(CORTEX_PRIO_MASK(STM32_USB_OTGFIFO_FILL_BASEPRI));
#endif
otg_fifo_write_from_buffer(usbp->otg->FIFO[ep],
usbp->epc[ep]->in_state->txbuf,
n);
usbp->epc[ep]->in_state->txbuf += n;
#if STM32_USB_OTGFIFO_FILL_BASEPRI
__set_BASEPRI(0);
#endif
usbp->epc[ep]->in_state->txcnt += n;
}
}
/**
* @brief Generic endpoint IN handler.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
static void otg_epin_handler(USBDriver *usbp, usbep_t ep) {
stm32_otg_t *otgp = usbp->otg;
uint32_t epint = otgp->ie[ep].DIEPINT;
otgp->ie[ep].DIEPINT = epint;
if (epint & DIEPINT_TOC) {
/* Timeouts not handled yet, not sure how to handle.*/
}
if ((epint & DIEPINT_XFRC) && (otgp->DIEPMSK & DIEPMSK_XFRCM)) {
/* Transmit transfer complete.*/
USBInEndpointState *isp = usbp->epc[ep]->in_state;
if (isp->txsize < isp->totsize) {
/* In case the transaction covered only part of the total transfer
then another transaction is immediately started in order to
cover the remaining.*/
isp->txsize = isp->totsize - isp->txsize;
isp->txcnt = 0;
osalSysLockFromISR();
usb_lld_start_in(usbp, ep);
osalSysUnlockFromISR();
}
else {
/* End on IN transfer.*/
_usb_isr_invoke_in_cb(usbp, ep);
}
}
if ((epint & DIEPINT_TXFE) &&
(otgp->DIEPEMPMSK & DIEPEMPMSK_INEPTXFEM(ep))) {
/* The thread is made ready, it will be scheduled on ISR exit.*/
osalSysLockFromISR();
usbp->txpending |= (1 << ep);
otgp->DIEPEMPMSK &= ~(1 << ep);
osalThreadResumeI(&usbp->wait, MSG_OK);
osalSysUnlockFromISR();
}
}
/**
* @brief Generic endpoint OUT handler.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
static void otg_epout_handler(USBDriver *usbp, usbep_t ep) {
stm32_otg_t *otgp = usbp->otg;
uint32_t epint = otgp->oe[ep].DOEPINT;
/* Resets all EP IRQ sources.*/
otgp->oe[ep].DOEPINT = epint;
if ((epint & DOEPINT_STUP) && (otgp->DOEPMSK & DOEPMSK_STUPM)) {
/* Setup packets handling, setup packets are handled using a
specific callback.*/
_usb_isr_invoke_setup_cb(usbp, ep);
}
if ((epint & DOEPINT_XFRC) && (otgp->DOEPMSK & DOEPMSK_XFRCM)) {
USBOutEndpointState *osp;
/* Receive transfer complete, checking if it is a SETUP transfer on EP0,
than it must be ignored, the STUPM handler will take care of it.*/
if ((ep == 0) && (usbp->ep0state == USB_EP0_WAITING_SETUP))
return;
/* OUT state structure pointer for this endpoint.*/
osp = usbp->epc[ep]->out_state;
/* A short packet always terminates a transaction.*/
if (((osp->rxcnt % usbp->epc[ep]->out_maxsize) == 0) &&
(osp->rxsize < osp->totsize)) {
/* In case the transaction covered only part of the total transfer
then another transaction is immediately started in order to
cover the remaining.*/
osp->rxsize = osp->totsize - osp->rxsize;
osp->rxcnt = 0;
osalSysLockFromISR();
usb_lld_start_out(usbp, ep);
osalSysUnlockFromISR();
}
else {
/* End on OUT transfer.*/
_usb_isr_invoke_out_cb(usbp, ep);
}
}
}
/**
* @brief Isochronous IN transfer failed handler.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
static void otg_isoc_in_failed_handler(USBDriver *usbp) {
usbep_t ep;
stm32_otg_t *otgp = usbp->otg;
for (ep = 0; ep <= usbp->otgparams->num_endpoints; ep++) {
if (((otgp->ie[ep].DIEPCTL & DIEPCTL_EPTYP_MASK) == DIEPCTL_EPTYP_ISO) &&
((otgp->ie[ep].DIEPCTL & DIEPCTL_EPENA) != 0)) {
/* Endpoint enabled -> ISOC IN transfer failed */
/* Disable endpoint */
otgp->ie[ep].DIEPCTL |= (DIEPCTL_EPDIS | DIEPCTL_SNAK);
while (otgp->ie[ep].DIEPCTL & DIEPCTL_EPENA)
;
/* Flush FIFO */
otg_txfifo_flush(usbp, ep);
/* Prepare data for next frame */
_usb_isr_invoke_in_cb(usbp, ep);
/* Pump out data for next frame */
osalSysLockFromISR();
otgp->DIEPEMPMSK &= ~(1 << ep);
usbp->txpending |= (1 << ep);
osalThreadResumeI(&usbp->wait, MSG_OK);
osalSysUnlockFromISR();
}
}
}
/**
* @brief Isochronous OUT transfer failed handler.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
static void otg_isoc_out_failed_handler(USBDriver *usbp) {
usbep_t ep;
stm32_otg_t *otgp = usbp->otg;
for (ep = 0; ep <= usbp->otgparams->num_endpoints; ep++) {
if (((otgp->oe[ep].DOEPCTL & DOEPCTL_EPTYP_MASK) == DOEPCTL_EPTYP_ISO) &&
((otgp->oe[ep].DOEPCTL & DOEPCTL_EPENA) != 0)) {
/* Endpoint enabled -> ISOC OUT transfer failed */
/* Disable endpoint */
/* FIXME: Core stucks here */
/*otgp->oe[ep].DOEPCTL |= (DOEPCTL_EPDIS | DOEPCTL_SNAK);
while (otgp->oe[ep].DOEPCTL & DOEPCTL_EPENA)
;*/
/* Prepare transfer for next frame */
_usb_isr_invoke_out_cb(usbp, ep);
}
}
}
/**
* @brief OTG shared ISR.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
static void usb_lld_serve_interrupt(USBDriver *usbp) {
stm32_otg_t *otgp = usbp->otg;
uint32_t sts, src;
sts = otgp->GINTSTS;
sts &= otgp->GINTMSK;
otgp->GINTSTS = sts;
/* Reset interrupt handling.*/
if (sts & GINTSTS_USBRST) {
/* Resetting pending operations.*/
usbp->txpending = 0;
/* Default reset action.*/
_usb_reset(usbp);
/* Preventing execution of more handlers, the core has been reset.*/
return;
}
/* Wake-up handling.*/
if (sts & GINTSTS_WKUPINT) {
/* If clocks are gated off, turn them back on (may be the case if
coming out of suspend mode).*/
if (otgp->PCGCCTL & (PCGCCTL_STPPCLK | PCGCCTL_GATEHCLK)) {
/* Set to zero to un-gate the USB core clocks.*/
otgp->PCGCCTL &= ~(PCGCCTL_STPPCLK | PCGCCTL_GATEHCLK);
}
/* Clear the Remote Wake-up Signaling.*/
otgp->DCTL |= DCTL_RWUSIG;
_usb_wakeup(usbp);
}
/* Suspend handling.*/
if (sts & GINTSTS_USBSUSP) {
/* Resetting pending operations.*/
usbp->txpending = 0;
/* Default suspend action.*/
_usb_suspend(usbp);
}
/* Enumeration done.*/
if (sts & GINTSTS_ENUMDNE) {
/* Full or High speed timing selection.*/
if ((otgp->DSTS & DSTS_ENUMSPD_MASK) == DSTS_ENUMSPD_HS_480) {
otgp->GUSBCFG = (otgp->GUSBCFG & ~(GUSBCFG_TRDT_MASK)) |
GUSBCFG_TRDT(TRDT_VALUE_HS);
}
else {
otgp->GUSBCFG = (otgp->GUSBCFG & ~(GUSBCFG_TRDT_MASK)) |
GUSBCFG_TRDT(TRDT_VALUE_FS);
}
}
/* SOF interrupt handling.*/
if (sts & GINTSTS_SOF) {
_usb_isr_invoke_sof_cb(usbp);
}
/* Isochronous IN failed handling */
if (sts & GINTSTS_IISOIXFR) {
otg_isoc_in_failed_handler(usbp);
}
/* Isochronous OUT failed handling */
if (sts & GINTSTS_IISOOXFR) {
otg_isoc_out_failed_handler(usbp);
}
/* RX FIFO not empty handling.*/
if (sts & GINTSTS_RXFLVL) {
/* The interrupt is masked while the thread has control or it would
be triggered again.*/
osalSysLockFromISR();
otgp->GINTMSK &= ~GINTMSK_RXFLVLM;
osalThreadResumeI(&usbp->wait, MSG_OK);
osalSysUnlockFromISR();
}
/* IN/OUT endpoints event handling.*/
src = otgp->DAINT;
if (sts & GINTSTS_OEPINT) {
if (src & (1 << 16))
otg_epout_handler(usbp, 0);
if (src & (1 << 17))
otg_epout_handler(usbp, 1);
if (src & (1 << 18))
otg_epout_handler(usbp, 2);
if (src & (1 << 19))
otg_epout_handler(usbp, 3);
#if USB_MAX_ENDPOINTS >= 4
if (src & (1 << 20))
otg_epout_handler(usbp, 4);
#endif
#if USB_MAX_ENDPOINTS >= 5
if (src & (1 << 21))
otg_epout_handler(usbp, 5);
#endif
#if USB_MAX_ENDPOINTS >= 6
if (src & (1 << 22))
otg_epout_handler(usbp, 6);
#endif
#if USB_MAX_ENDPOINTS >= 7
if (src & (1 << 23))
otg_epout_handler(usbp, 7);
#endif
#if USB_MAX_ENDPOINTS >= 8
if (src & (1 << 24))
otg_epout_handler(usbp, 8);
#endif
}
if (sts & GINTSTS_IEPINT) {
if (src & (1 << 0))
otg_epin_handler(usbp, 0);
if (src & (1 << 1))
otg_epin_handler(usbp, 1);
if (src & (1 << 2))
otg_epin_handler(usbp, 2);
if (src & (1 << 3))
otg_epin_handler(usbp, 3);
#if USB_MAX_ENDPOINTS >= 4
if (src & (1 << 4))
otg_epin_handler(usbp, 4);
#endif
#if USB_MAX_ENDPOINTS >= 5
if (src & (1 << 5))
otg_epin_handler(usbp, 5);
#endif
#if USB_MAX_ENDPOINTS >= 6
if (src & (1 << 6))
otg_epin_handler(usbp, 6);
#endif
#if USB_MAX_ENDPOINTS >= 7
if (src & (1 << 7))
otg_epin_handler(usbp, 7);
#endif
#if USB_MAX_ENDPOINTS >= 8
if (src & (1 << 8))
otg_epin_handler(usbp, 8);
#endif
}
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if STM32_USB_USE_OTG1 || defined(__DOXYGEN__)
/**
* @brief OTG1 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_OTG1_HANDLER) {
OSAL_IRQ_PROLOGUE();
usb_lld_serve_interrupt(&USBD1);
OSAL_IRQ_EPILOGUE();
}
#endif
#if STM32_USB_USE_OTG2 || defined(__DOXYGEN__)
/**
* @brief OTG2 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_OTG2_HANDLER) {
OSAL_IRQ_PROLOGUE();
usb_lld_serve_interrupt(&USBD2);
OSAL_IRQ_EPILOGUE();
}
#endif
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level USB driver initialization.
*
* @notapi
*/
void usb_lld_init(void) {
/* Driver initialization.*/
#if STM32_USB_USE_OTG1
usbObjectInit(&USBD1);
USBD1.wait = NULL;
USBD1.otg = OTG_FS;
USBD1.otgparams = &fsparams;
#if defined(_CHIBIOS_RT_)
USBD1.tr = NULL;
/* Filling the thread working area here because the function
@p chThdCreateI() does not do it.*/
#if CH_DBG_FILL_THREADS
{
void *wsp = USBD1.wa_pump;
_thread_memfill((uint8_t *)wsp,
(uint8_t *)wsp + sizeof (USBD1.wa_pump),
CH_DBG_STACK_FILL_VALUE);
}
#endif /* CH_DBG_FILL_THREADS */
#endif /* defined(_CHIBIOS_RT_) */
#endif
#if STM32_USB_USE_OTG2
usbObjectInit(&USBD2);
USBD2.wait = NULL;
USBD2.otg = OTG_HS;
USBD2.otgparams = &hsparams;
#if defined(_CHIBIOS_RT_)
USBD2.tr = NULL;
/* Filling the thread working area here because the function
@p chThdCreateI() does not do it.*/
#if CH_DBG_FILL_THREADS
{
void *wsp = USBD2.wa_pump;
_thread_memfill((uint8_t *)wsp,
(uint8_t *)wsp + sizeof (USBD2.wa_pump),
CH_DBG_STACK_FILL_VALUE);
}
#endif /* CH_DBG_FILL_THREADS */
#endif /* defined(_CHIBIOS_RT_) */
#endif
}
/**
* @brief Configures and activates the USB peripheral.
* @note Starting the OTG cell can be a slow operation carried out with
* interrupts disabled, perform it before starting time-critical
* operations.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
void usb_lld_start(USBDriver *usbp) {
stm32_otg_t *otgp = usbp->otg;
if (usbp->state == USB_STOP) {
/* Clock activation.*/
#if STM32_USB_USE_OTG1
if (&USBD1 == usbp) {
/* OTG FS clock enable and reset.*/
rccEnableOTG_FS(false);
rccResetOTG_FS();
/* Enables IRQ vector.*/
nvicEnableVector(STM32_OTG1_NUMBER, STM32_USB_OTG1_IRQ_PRIORITY);
/* - Forced device mode.
- USB turn-around time = TRDT_VALUE_FS.
- Full Speed 1.1 PHY.*/
otgp->GUSBCFG = GUSBCFG_FDMOD | GUSBCFG_TRDT(TRDT_VALUE_FS) |
GUSBCFG_PHYSEL;
/* 48MHz 1.1 PHY.*/
otgp->DCFG = 0x02200000 | DCFG_DSPD_FS11;
}
#endif
#if STM32_USB_USE_OTG2
if (&USBD2 == usbp) {
/* OTG HS clock enable and reset.*/
rccEnableOTG_HS(false);
rccResetOTG_HS();
/* ULPI clock is managed depending on the presence of an external
PHY.*/
#if defined(BOARD_OTG2_USES_ULPI)
rccEnableOTG_HSULPI(true);
#else
/* Workaround for the problem described here:
http://forum.chibios.org/phpbb/viewtopic.php?f=16&t=1798.*/
rccDisableOTG_HSULPI(true);
#endif
/* Enables IRQ vector.*/
nvicEnableVector(STM32_OTG2_NUMBER, STM32_USB_OTG2_IRQ_PRIORITY);
/* - Forced device mode.
- USB turn-around time = TRDT_VALUE_HS or TRDT_VALUE_FS.*/
#if defined(BOARD_OTG2_USES_ULPI)
/* High speed ULPI PHY.*/
otgp->GUSBCFG = GUSBCFG_FDMOD | GUSBCFG_TRDT(TRDT_VALUE_HS) |
GUSBCFG_SRPCAP | GUSBCFG_HNPCAP;
#else
otgp->GUSBCFG = GUSBCFG_FDMOD | GUSBCFG_TRDT(TRDT_VALUE_FS) |
GUSBCFG_PHYSEL;
#endif
#if defined(BOARD_OTG2_USES_ULPI)
#if STM32_USE_USB_OTG2_HS
/* USB 2.0 High Speed PHY in HS mode.*/
otgp->DCFG = 0x02200000 | DCFG_DSPD_HS;
#else
/* USB 2.0 High Speed PHY in FS mode.*/
otgp->DCFG = 0x02200000 | DCFG_DSPD_HS_FS;
#endif
#else
/* 48MHz 1.1 PHY.*/
otgp->DCFG = 0x02200000 | DCFG_DSPD_FS11;
#endif
}
#endif
/* Clearing mask of TXFIFOs to be filled.*/
usbp->txpending = 0;
/* PHY enabled.*/
otgp->PCGCCTL = 0;
/* VBUS sensing and transceiver enabled.*/
otgp->GOTGCTL = GOTGCTL_BVALOEN | GOTGCTL_BVALOVAL;
#if defined(BOARD_OTG2_USES_ULPI)
#if STM32_USB_USE_OTG1
if (&USBD1 == usbp) {
otgp->GCCFG = GCCFG_INIT_VALUE;
}
#endif
#if STM32_USB_USE_OTG2
if (&USBD2 == usbp) {
otgp->GCCFG = 0;
}
#endif
#else
otgp->GCCFG = GCCFG_INIT_VALUE;
#endif
/* Soft core reset.*/
otg_core_reset(usbp);
/* Interrupts on TXFIFOs half empty.*/
otgp->GAHBCFG = 0;
/* Endpoints re-initialization.*/
otg_disable_ep(usbp);
/* Clear all pending Device Interrupts, only the USB Reset interrupt
is required initially.*/
otgp->DIEPMSK = 0;
otgp->DOEPMSK = 0;
otgp->DAINTMSK = 0;
if (usbp->config->sof_cb == NULL)
otgp->GINTMSK = GINTMSK_ENUMDNEM | GINTMSK_USBRSTM | GINTMSK_USBSUSPM |
GINTMSK_ESUSPM | GINTMSK_SRQM | GINTMSK_WKUM |
GINTMSK_IISOIXFRM | GINTMSK_IISOOXFRM;
else
otgp->GINTMSK = GINTMSK_ENUMDNEM | GINTMSK_USBRSTM | GINTMSK_USBSUSPM |
GINTMSK_ESUSPM | GINTMSK_SRQM | GINTMSK_WKUM |
GINTMSK_IISOIXFRM | GINTMSK_IISOOXFRM |
GINTMSK_SOFM;
/* Clears all pending IRQs, if any. */
otgp->GINTSTS = 0xFFFFFFFF;
#if defined(_CHIBIOS_RT_)
/* Creates the data pump thread. Note, it is created only once.*/
if (usbp->tr == NULL) {
thread_descriptor_t usbpump_descriptor = {
"usb_pump",
THD_WORKING_AREA_BASE(usbp->wa_pump),
THD_WORKING_AREA_END(usbp->wa_pump),
STM32_USB_OTG_THREAD_PRIO,
usb_lld_pump,
(void *)usbp
};
usbp->tr = chThdCreateI(&usbpump_descriptor);
chSchRescheduleS();
}
#endif
/* Global interrupts enable.*/
otgp->GAHBCFG |= GAHBCFG_GINTMSK;
}
}
/**
* @brief Deactivates the USB peripheral.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
void usb_lld_stop(USBDriver *usbp) {
stm32_otg_t *otgp = usbp->otg;
/* If in ready state then disables the USB clock.*/
if (usbp->state != USB_STOP) {
/* Disabling all endpoints in case the driver has been stopped while
active.*/
otg_disable_ep(usbp);
usbp->txpending = 0;
otgp->DAINTMSK = 0;
otgp->GAHBCFG = 0;
otgp->GCCFG = 0;
#if STM32_USB_USE_OTG1
if (&USBD1 == usbp) {
nvicDisableVector(STM32_OTG1_NUMBER);
rccDisableOTG_FS(false);
}
#endif
#if STM32_USB_USE_OTG2
if (&USBD2 == usbp) {
nvicDisableVector(STM32_OTG2_NUMBER);
rccDisableOTG_HS(false);
#if defined(BOARD_OTG2_USES_ULPI)
rccDisableOTG_HSULPI(true)
#endif
}
#endif
}
}
/**
* @brief USB low level reset routine.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
void usb_lld_reset(USBDriver *usbp) {
unsigned i;
stm32_otg_t *otgp = usbp->otg;
/* Flush the Tx FIFO.*/
otg_txfifo_flush(usbp, 0);
/* Endpoint interrupts all disabled and cleared.*/
otgp->DIEPEMPMSK = 0;
otgp->DAINTMSK = DAINTMSK_OEPM(0) | DAINTMSK_IEPM(0);
/* All endpoints in NAK mode, interrupts cleared.*/
for (i = 0; i <= usbp->otgparams->num_endpoints; i++) {
otgp->ie[i].DIEPCTL = DIEPCTL_SNAK;
otgp->oe[i].DOEPCTL = DOEPCTL_SNAK;
otgp->ie[i].DIEPINT = 0xFFFFFFFF;
otgp->oe[i].DOEPINT = 0xFFFFFFFF;
}
/* Resets the FIFO memory allocator.*/
otg_ram_reset(usbp);
/* Receive FIFO size initialization, the address is always zero.*/
otgp->GRXFSIZ = usbp->otgparams->rx_fifo_size;
otg_rxfifo_flush(usbp);
/* Resets the device address to zero.*/
otgp->DCFG = (otgp->DCFG & ~DCFG_DAD_MASK) | DCFG_DAD(0);
/* Enables also EP-related interrupt sources.*/
otgp->GINTMSK |= GINTMSK_RXFLVLM | GINTMSK_OEPM | GINTMSK_IEPM;
otgp->DIEPMSK = DIEPMSK_TOCM | DIEPMSK_XFRCM;
otgp->DOEPMSK = DOEPMSK_STUPM | DOEPMSK_XFRCM;
/* EP0 initialization, it is a special case.*/
usbp->epc[0] = &ep0config;
otgp->oe[0].DOEPTSIZ = 0;
otgp->oe[0].DOEPCTL = DOEPCTL_SD0PID | DOEPCTL_USBAEP | DOEPCTL_EPTYP_CTRL |
DOEPCTL_MPSIZ(ep0config.out_maxsize);
otgp->ie[0].DIEPTSIZ = 0;
otgp->ie[0].DIEPCTL = DIEPCTL_SD0PID | DIEPCTL_USBAEP | DIEPCTL_EPTYP_CTRL |
DIEPCTL_TXFNUM(0) | DIEPCTL_MPSIZ(ep0config.in_maxsize);
otgp->DIEPTXF0 = DIEPTXF_INEPTXFD(ep0config.in_maxsize / 4) |
DIEPTXF_INEPTXSA(otg_ram_alloc(usbp,
ep0config.in_maxsize / 4));
}
/**
* @brief Sets the USB address.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
void usb_lld_set_address(USBDriver *usbp) {
stm32_otg_t *otgp = usbp->otg;
otgp->DCFG = (otgp->DCFG & ~DCFG_DAD_MASK) | DCFG_DAD(usbp->address);
}
/**
* @brief Enables an endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep) {
uint32_t ctl, fsize;
stm32_otg_t *otgp = usbp->otg;
/* IN and OUT common parameters.*/
switch (usbp->epc[ep]->ep_mode & USB_EP_MODE_TYPE) {
case USB_EP_MODE_TYPE_CTRL:
ctl = DIEPCTL_SD0PID | DIEPCTL_USBAEP | DIEPCTL_EPTYP_CTRL;
break;
case USB_EP_MODE_TYPE_ISOC:
ctl = DIEPCTL_SD0PID | DIEPCTL_USBAEP | DIEPCTL_EPTYP_ISO;
break;
case USB_EP_MODE_TYPE_BULK:
ctl = DIEPCTL_SD0PID | DIEPCTL_USBAEP | DIEPCTL_EPTYP_BULK;
break;
case USB_EP_MODE_TYPE_INTR:
ctl = DIEPCTL_SD0PID | DIEPCTL_USBAEP | DIEPCTL_EPTYP_INTR;
break;
default:
return;
}
/* OUT endpoint activation or deactivation.*/
otgp->oe[ep].DOEPTSIZ = 0;
if (usbp->epc[ep]->out_state != NULL) {
otgp->oe[ep].DOEPCTL = ctl | DOEPCTL_MPSIZ(usbp->epc[ep]->out_maxsize);
otgp->DAINTMSK |= DAINTMSK_OEPM(ep);
}
else {
otgp->oe[ep].DOEPCTL &= ~DOEPCTL_USBAEP;
otgp->DAINTMSK &= ~DAINTMSK_OEPM(ep);
}
/* IN endpoint activation or deactivation.*/
otgp->ie[ep].DIEPTSIZ = 0;
if (usbp->epc[ep]->in_state != NULL) {
/* FIFO allocation for the IN endpoint.*/
fsize = usbp->epc[ep]->in_maxsize / 4;
if (usbp->epc[ep]->in_multiplier > 1)
fsize *= usbp->epc[ep]->in_multiplier;
otgp->DIEPTXF[ep - 1] = DIEPTXF_INEPTXFD(fsize) |
DIEPTXF_INEPTXSA(otg_ram_alloc(usbp, fsize));
otg_txfifo_flush(usbp, ep);
otgp->ie[ep].DIEPCTL = ctl |
DIEPCTL_TXFNUM(ep) |
DIEPCTL_MPSIZ(usbp->epc[ep]->in_maxsize);
otgp->DAINTMSK |= DAINTMSK_IEPM(ep);
}
else {
otgp->DIEPTXF[ep - 1] = 0x02000400; /* Reset value.*/
otg_txfifo_flush(usbp, ep);
otgp->ie[ep].DIEPCTL &= ~DIEPCTL_USBAEP;
otgp->DAINTMSK &= ~DAINTMSK_IEPM(ep);
}
}
/**
* @brief Disables all the active endpoints except the endpoint zero.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
void usb_lld_disable_endpoints(USBDriver *usbp) {
/* Resets the FIFO memory allocator.*/
otg_ram_reset(usbp);
/* Disabling all endpoints.*/
otg_disable_ep(usbp);
}
/**
* @brief Returns the status of an OUT endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @return The endpoint status.
* @retval EP_STATUS_DISABLED The endpoint is not active.
* @retval EP_STATUS_STALLED The endpoint is stalled.
* @retval EP_STATUS_ACTIVE The endpoint is active.
*
* @notapi
*/
usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep) {
uint32_t ctl;
(void)usbp;
ctl = usbp->otg->oe[ep].DOEPCTL;
if (!(ctl & DOEPCTL_USBAEP))
return EP_STATUS_DISABLED;
if (ctl & DOEPCTL_STALL)
return EP_STATUS_STALLED;
return EP_STATUS_ACTIVE;
}
/**
* @brief Returns the status of an IN endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @return The endpoint status.
* @retval EP_STATUS_DISABLED The endpoint is not active.
* @retval EP_STATUS_STALLED The endpoint is stalled.
* @retval EP_STATUS_ACTIVE The endpoint is active.
*
* @notapi
*/
usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep) {
uint32_t ctl;
(void)usbp;
ctl = usbp->otg->ie[ep].DIEPCTL;
if (!(ctl & DIEPCTL_USBAEP))
return EP_STATUS_DISABLED;
if (ctl & DIEPCTL_STALL)
return EP_STATUS_STALLED;
return EP_STATUS_ACTIVE;
}
/**
* @brief Reads a setup packet from the dedicated packet buffer.
* @details This function must be invoked in the context of the @p setup_cb
* callback in order to read the received setup packet.
* @pre In order to use this function the endpoint must have been
* initialized as a control endpoint.
* @post The endpoint is ready to accept another packet.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @param[out] buf buffer where to copy the packet data
*
* @notapi
*/
void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf) {
memcpy(buf, usbp->epc[ep]->setup_buf, 8);
}
/**
* @brief Starts a receive operation on an OUT endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
void usb_lld_start_out(USBDriver *usbp, usbep_t ep) {
uint32_t pcnt, rxsize;
USBOutEndpointState *osp = usbp->epc[ep]->out_state;
/* Transfer initialization.*/
osp->totsize = osp->rxsize;
if ((ep == 0) && (osp->rxsize > EP0_MAX_OUTSIZE))
osp->rxsize = EP0_MAX_OUTSIZE;
/* Transaction size is rounded to a multiple of packet size because the
following requirement in the RM:
"For OUT transfers, the transfer size field in the endpoint's transfer
size register must be a multiple of the maximum packet size of the
endpoint, adjusted to the Word boundary".*/
pcnt = (osp->rxsize + usbp->epc[ep]->out_maxsize - 1U) /
usbp->epc[ep]->out_maxsize;
rxsize = (pcnt * usbp->epc[ep]->out_maxsize + 3U) & 0xFFFFFFFCU;
/*Setting up transaction parameters in DOEPTSIZ.*/
usbp->otg->oe[ep].DOEPTSIZ = DOEPTSIZ_STUPCNT(3) | DOEPTSIZ_PKTCNT(pcnt) |
DOEPTSIZ_XFRSIZ(rxsize);
/* Special case of isochronous endpoint.*/
if ((usbp->epc[ep]->ep_mode & USB_EP_MODE_TYPE) == USB_EP_MODE_TYPE_ISOC) {
/* Odd/even bit toggling for isochronous endpoint.*/
if (usbp->otg->DSTS & DSTS_FNSOF_ODD)
usbp->otg->oe[ep].DOEPCTL |= DOEPCTL_SEVNFRM;
else
usbp->otg->oe[ep].DOEPCTL |= DOEPCTL_SODDFRM;
}
/* Starting operation.*/
usbp->otg->oe[ep].DOEPCTL |= DOEPCTL_EPENA | DOEPCTL_CNAK;
}
/**
* @brief Starts a transmit operation on an IN endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
void usb_lld_start_in(USBDriver *usbp, usbep_t ep) {
USBInEndpointState *isp = usbp->epc[ep]->in_state;
/* Transfer initialization.*/
isp->totsize = isp->txsize;
if (isp->txsize == 0) {
/* Special case, sending zero size packet.*/
usbp->otg->ie[ep].DIEPTSIZ = DIEPTSIZ_PKTCNT(1) | DIEPTSIZ_XFRSIZ(0);
}
else {
if ((ep == 0) && (isp->txsize > EP0_MAX_INSIZE))
isp->txsize = EP0_MAX_INSIZE;
/* Normal case.*/
uint32_t pcnt = (isp->txsize + usbp->epc[ep]->in_maxsize - 1) /
usbp->epc[ep]->in_maxsize;
/* TODO: Support more than one packet per frame for isochronous transfers.*/
usbp->otg->ie[ep].DIEPTSIZ = DIEPTSIZ_MCNT(1) | DIEPTSIZ_PKTCNT(pcnt) |
DIEPTSIZ_XFRSIZ(isp->txsize);
}
/* Special case of isochronous endpoint.*/
if ((usbp->epc[ep]->ep_mode & USB_EP_MODE_TYPE) == USB_EP_MODE_TYPE_ISOC) {
/* Odd/even bit toggling.*/
if (usbp->otg->DSTS & DSTS_FNSOF_ODD)
usbp->otg->ie[ep].DIEPCTL |= DIEPCTL_SEVNFRM;
else
usbp->otg->ie[ep].DIEPCTL |= DIEPCTL_SODDFRM;
}
/* Starting operation.*/
usbp->otg->ie[ep].DIEPCTL |= DIEPCTL_EPENA | DIEPCTL_CNAK;
usbp->otg->DIEPEMPMSK |= DIEPEMPMSK_INEPTXFEM(ep);
}
/**
* @brief Brings an OUT endpoint in the stalled state.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
void usb_lld_stall_out(USBDriver *usbp, usbep_t ep) {
usbp->otg->oe[ep].DOEPCTL |= DOEPCTL_STALL;
}
/**
* @brief Brings an IN endpoint in the stalled state.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
void usb_lld_stall_in(USBDriver *usbp, usbep_t ep) {
usbp->otg->ie[ep].DIEPCTL |= DIEPCTL_STALL;
}
/**
* @brief Brings an OUT endpoint in the active state.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
void usb_lld_clear_out(USBDriver *usbp, usbep_t ep) {
usbp->otg->oe[ep].DOEPCTL &= ~DOEPCTL_STALL;
}
/**
* @brief Brings an IN endpoint in the active state.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
void usb_lld_clear_in(USBDriver *usbp, usbep_t ep) {
usbp->otg->ie[ep].DIEPCTL &= ~DIEPCTL_STALL;
}
/**
* @brief USB data transfer loop.
* @details This function must be executed by a system thread in order to
* make the USB driver work.
* @note The data copy part of the driver is implemented in this thread
* in order to not perform heavy tasks within interrupt handlers.
*
* @param[in] p pointer to the @p USBDriver object
*
* @special
*/
void usb_lld_pump(void *p) {
USBDriver *usbp = (USBDriver *)p;
stm32_otg_t *otgp = usbp->otg;
osalSysLock();
while (true) {
usbep_t ep;
uint32_t epmask;
/* Nothing to do, going to sleep.*/
if ((usbp->state == USB_STOP) ||
((usbp->txpending == 0) && !(otgp->GINTSTS & GINTSTS_RXFLVL))) {
otgp->GINTMSK |= GINTMSK_RXFLVLM;
osalThreadSuspendS(&usbp->wait);
}
osalSysUnlock();
/* Checks if there are TXFIFOs to be filled.*/
for (ep = 0; ep <= usbp->otgparams->num_endpoints; ep++) {
/* Empties the RX FIFO.*/
while (otgp->GINTSTS & GINTSTS_RXFLVL) {
otg_rxfifo_handler(usbp);
}
epmask = (1 << ep);
if (usbp->txpending & epmask) {
bool done;
osalSysLock();
/* USB interrupts are globally *suspended* because the peripheral
does not allow any interference during the TX FIFO filling
operation.
Synopsys document: DesignWare Cores USB 2.0 Hi-Speed On-The-Go (OTG)
"The application has to finish writing one complete packet before
switching to a different channel/endpoint FIFO. Violating this
rule results in an error.".*/
otgp->GAHBCFG &= ~GAHBCFG_GINTMSK;
usbp->txpending &= ~epmask;
osalSysUnlock();
done = otg_txfifo_handler(usbp, ep);
osalSysLock();
otgp->GAHBCFG |= GAHBCFG_GINTMSK;
if (!done)
otgp->DIEPEMPMSK |= epmask;
osalSysUnlock();
}
}
osalSysLock();
}
}
#endif /* HAL_USE_USB */
/** @} */
|