path: root/os/hal/ports/AVR/MEGA/LLD/USARTv1/hal_serial_lld.c

/*
    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

/**
 * @file    USARTv1/hal_serial_lld.c
 * @brief   AVR/MEGA SERIAL subsystem low level driver code.
 *
 * @addtogroup SERIAL
 * @{
 */

#include "hal.h"

#if HAL_USE_SERIAL || defined(__DOXYGEN__)

/*===========================================================================*/
/* Driver exported variables.                                                */
/*===========================================================================*/

/**
 * @brief   USART0 serial driver identifier.
 * @note    The name does not follow the convention used in the other ports
 *          (COMn) because a name conflict with the AVR headers.
 */
#if AVR_SERIAL_USE_USART0 || defined(__DOXYGEN__)
SerialDriver SD1;

  /* USARTs are not consistently named across the AVR range */
  #ifdef USART0_RX_vect
    #define AVR_SD1_RX_VECT USART0_RX_vect
    #define AVR_SD1_TX_VECT USART0_UDRE_vect
  #elif defined(USART_RX_vect)
    #define AVR_SD1_RX_VECT USART_RX_vect
    #define AVR_SD1_TX_VECT USART_UDRE_vect
  #elif defined(USART0_RXC_vect)
    #define AVR_SD1_RX_VECT USART0_RXC_vect
    #define AVR_SD1_TX_VECT USART0_UDRE_vect
  #else
    #error "Cannot find USART to use for SD1"
  #endif 
#endif /* AVR_SERIAL_USE_USART0 */

/**
 * @brief   USART1 serial driver identifier.
 * @note    The name does not follow the convention used in the other ports
 *          (COMn) because a name conflict with the AVR headers.
 */
#if AVR_SERIAL_USE_USART1 || defined(__DOXYGEN__)
SerialDriver SD2;

  /* Check if USART1 exists for this MCU */
  #ifdef USART1_RX_vect
    #define AVR_SD2_RX_VECT USART1_RX_vect
    #define AVR_SD2_TX_VECT USART1_UDRE_vect
  #elif defined (USART1_RXC_vect)
    #define AVR_SD2_RX_VECT USART1_RXC_vect
    #define AVR_SD2_TX_VECT USART1_UDRE_vect
  #else
    #error "Cannot find USART to use for SD2"
  #endif
#endif /* AVR_SERIAL_USE_USART1 */

/*===========================================================================*/
/* Driver local variables and types.                                         */
/*===========================================================================*/

/**
 * @brief   Driver default configuration.
 */
static const SerialConfig default_config = {
  UBRR2x_F(SERIAL_DEFAULT_BITRATE),
  USART_CHAR_SIZE_8
};

/*===========================================================================*/
/* Driver local functions.                                                   */
/*===========================================================================*/

static void set_error(uint8_t sra, SerialDriver *sdp) {
  eventflags_t sts = 0;
  uint8_t dor = 0;
  uint8_t upe = 0;
  uint8_t fe = 0;

#if AVR_SERIAL_USE_USART0
  if (&SD1 == sdp) {
    dor = (1 << DOR0);
    upe = (1 << UPE0);
    fe = (1 << FE0);
  }
#endif

#if AVR_SERIAL_USE_USART1
  if (&SD2 == sdp) {
    dor = (1 << DOR1);
    upe = (1 << UPE1);
    fe = (1 << FE1);
  }
#endif

  if (sra & dor)
    sts |= SD_OVERRUN_ERROR;
  if (sra & upe)
    sts |= SD_PARITY_ERROR;
  if (sra & fe)
    sts |= SD_FRAMING_ERROR;
  osalSysLockFromISR();
  chnAddFlagsI(sdp, sts);
  osalSysUnlockFromISR();
}

#if AVR_SERIAL_USE_USART0 || defined(__DOXYGEN__)
static void notify1(io_queue_t *qp) {

  (void)qp;
  UCSR0B |= (1 << UDRIE0);
}

/**
 * @brief   USART0 initialization.
 *
 * @param[in] config    the architecture-dependent serial driver configuration
 */
static void usart0_init(const SerialConfig *config) {

  uint8_t ucsr0c;

  UBRR0L = config->sc_brr;
  UBRR0H = (config->sc_brr >> 8) & 0x0f;
  UCSR0A = (1 << U2X0);
  UCSR0B = (1 << RXEN0) | (1 << TXEN0) | (1 << RXCIE0);
  switch (config->sc_bits_per_char) {
  case USART_CHAR_SIZE_5:
    ucsr0c = 0;
    break;
  case USART_CHAR_SIZE_6:
    ucsr0c = (1 << UCSZ00);
    break;
  case USART_CHAR_SIZE_7:
    ucsr0c = (1 << UCSZ01);
    break;
  case USART_CHAR_SIZE_9:
    UCSR0B |= (1 << UCSZ02);
    ucsr0c = (1 << UCSZ00) | (1 << UCSZ01);
    break;
  case USART_CHAR_SIZE_8:
  default:
    ucsr0c = (1 << UCSZ00) | (1 << UCSZ01);
  }
  
#if defined(__AVR_ATmega162__)
  UCSR0C = (1 << URSEL0) | ucsr0c;
#else
  UCSR0C = ucsr0c;
#endif
}

/**
 * @brief   USART0 de-initialization.
 */
static void usart0_deinit(void) {

  UCSR0A = 0;
  UCSR0B = 0;
#if defined(__AVR_ATmega162__)
  UCSR0C = (1 << URSEL0);
#else
  UCSR0C = 0;
#endif
}
#endif

#if AVR_SERIAL_USE_USART1 || defined(__DOXYGEN__)
static void notify2(io_queue_t *qp) {

  (void)qp;
  UCSR1B |= (1 << UDRIE1);
}

/**
 * @brief   USART1 initialization.
 *
 * @param[in] config    the architecture-dependent serial driver configuration
 */
static void usart1_init(const SerialConfig *config) {

  uint8_t ucsr1c;

  UBRR1L = config->sc_brr;
  UBRR1H = (config->sc_brr >> 8) & 0x0f;
  UCSR1A = (1 << U2X0);
  UCSR1B = (1 << RXEN1) | (1 << TXEN1) | (1 << RXCIE1);
  switch (config->sc_bits_per_char) {
  case USART_CHAR_SIZE_5:
	ucsr1c = 0;
    break;
  case USART_CHAR_SIZE_6:
    ucsr1c = (1 << UCSZ10);
    break;
  case USART_CHAR_SIZE_7:
    ucsr1c = (1 << UCSZ11);
    break;
  case USART_CHAR_SIZE_9:
    UCSR1B |= (1 << UCSZ12);
    ucsr1c = (1 << UCSZ10) | (1 << UCSZ11);
    break;
  case USART_CHAR_SIZE_8:
  default:
    ucsr1c = (1 << UCSZ10) | (1 << UCSZ11);
  }
  
#if defined(__AVR_ATmega162__)
  UCSR1C = (1 << URSEL1) | ucsr1c;
#else
  UCSR1C = ucsr1c;
#endif
}

/**
 * @brief   USART1 de-initialization.
 */
static void usart1_deinit(void) {

  UCSR1A = 0;
  UCSR1B = 0;
#if defined(__AVR_ATmega162__)
  UCSR1C = (1 << URSEL1);
#else
  UCSR1C = 0;
#endif
}
#endif

/*===========================================================================*/
/* Driver interrupt handlers.                                                */
/*===========================================================================*/

#if AVR_SERIAL_USE_USART0 || defined(__DOXYGEN__)
/**
 * @brief   USART0 RX interrupt handler.
 *
 * @isr
 */
OSAL_IRQ_HANDLER(AVR_SD1_RX_VECT) {
  uint8_t sra;

  OSAL_IRQ_PROLOGUE();

  sra = UCSR0A;
  if (sra & ((1 << DOR0) | (1 << UPE0) | (1 << FE0)))
    set_error(sra, &SD1);
  osalSysLockFromISR();
  sdIncomingDataI(&SD1, UDR0);
  osalSysUnlockFromISR();

  OSAL_IRQ_EPILOGUE();
}

/**
 * @brief   USART0 TX interrupt handler.
 *
 * @isr
 */
OSAL_IRQ_HANDLER(AVR_SD1_TX_VECT) {
  msg_t b;

  OSAL_IRQ_PROLOGUE();

  osalSysLockFromISR();
  b = sdRequestDataI(&SD1);
  osalSysUnlockFromISR();
  if (b < MSG_OK)
    UCSR0B &= ~(1 << UDRIE0);
  else
    UDR0 = b;

  OSAL_IRQ_EPILOGUE();
}
#endif /* AVR_SERIAL_USE_USART0 */

#if AVR_SERIAL_USE_USART1 || defined(__DOXYGEN__)
/**
 * @brief   USART1 RX interrupt handler.
 *
 * @isr
 */
OSAL_IRQ_HANDLER(AVR_SD2_RX_VECT) {
  uint8_t sra;

  OSAL_IRQ_PROLOGUE();

  sra = UCSR1A;
  if (sra & ((1 << DOR1) | (1 << UPE1) | (1 << FE1)))
    set_error(sra, &SD2);
  osalSysLockFromISR();
  sdIncomingDataI(&SD2, UDR1);
  osalSysUnlockFromISR();

  OSAL_IRQ_EPILOGUE();
}

/**
 * @brief   USART1 TX interrupt handler.
 *
 * @isr
 */
OSAL_IRQ_HANDLER(AVR_SD2_TX_VECT) {
  msg_t b;

  OSAL_IRQ_PROLOGUE();

  osalSysLockFromISR();
  b = sdRequestDataI(&SD2);
  osalSysUnlockFromISR();
  if (b < MSG_OK)
    UCSR1B &= ~(1 << UDRIE1);
  else
    UDR1 = b;

  OSAL_IRQ_EPILOGUE();
}
#endif /* AVR_SERIAL_USE_USART1 */

/*===========================================================================*/
/* Driver exported functions.                                                */
/*===========================================================================*/

/**
 * @brief   Low level serial driver initialization.
 *
 * @notapi
 */
void sd_lld_init(void) {

#if AVR_SERIAL_USE_USART0
  sdObjectInit(&SD1, NULL, notify1);
#endif
#if AVR_SERIAL_USE_USART1
  sdObjectInit(&SD2, NULL, notify2);
#endif
}

/**
 * @brief   Low level serial driver configuration and (re)start.
 *
 * @param[in] sdp       pointer to a @p SerialDriver object
 * @param[in] config    the architecture-dependent serial driver configuration.
 *                      If this parameter is set to @p NULL then a default
 *                      configuration is used.
 *
 * @notapi
 */
void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {

  if (config == NULL)
    config = &default_config;

#if AVR_SERIAL_USE_USART0
  if (&SD1 == sdp) {
    usart0_init(config);
    return;
  }
#endif
#if AVR_SERIAL_USE_USART1
  if (&SD2 == sdp) {
    usart1_init(config);
    return;
  }
#endif
}

/**
 * @brief   Low level serial driver stop.
 * @details De-initializes the USART, stops the associated clock, resets the
 *          interrupt vector.
 *
 * @param[in] sdp       pointer to a @p SerialDriver object
 *
 * @notapi
 */
void sd_lld_stop(SerialDriver *sdp) {

#if AVR_SERIAL_USE_USART0
  if (&SD1 == sdp)
    usart0_deinit();
#endif
#if AVR_SERIAL_USE_USART1
  if (&SD2 == sdp)
    usart1_deinit();
#endif
}

#endif /* HAL_USE_SERIAL */

/** @} */