1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
|
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file STM32F4xx/hal_lld.c
* @brief STM32F4xx HAL subsystem low level driver source.
*
* @addtogroup HAL
* @{
*/
#include "ch.h"
#include "hal.h"
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level HAL driver initialization.
*
* @notapi
*/
void hal_lld_init(void) {
/* Reset of all peripherals. AHB3 is not reseted because it could have
been initialized in the board initialization file (board.c).*/
rccResetAHB1(!0);
rccResetAHB2(!0);
rccResetAHB3(!0);
rccResetAPB1(!RCC_APB1RSTR_PWRRST);
rccResetAPB2(!0);
/* SysTick initialization using the system clock.*/
SysTick->LOAD = STM32_HCLK / CH_FREQUENCY - 1;
SysTick->VAL = 0;
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_ENABLE_Msk |
SysTick_CTRL_TICKINT_Msk;
/* DWT cycle counter enable.*/
DWT_CTRL |= DWT_CTRL_CYCCNTENA;
#if defined(STM32_DMA_REQUIRED)
dmaInit();
#endif
/* Programmable voltage detector enable.*/
#if STM32_PVD_ENABLE
rccEnablePWRInterface(FALSE);
PWR->CR |= PWR_CR_PVDE | (STM32_PLS & STM32_PLS_MASK);
#endif /* STM32_PVD_ENABLE */
}
/**
* @brief STM32F2xx clocks and PLL initialization.
* @note All the involved constants come from the file @p board.h.
* @note This function should be invoked just after the system reset.
*
* @special
*/
void stm32_clock_init(void) {
#if !STM32_NO_INIT
/* PWR clock enable.*/
RCC->APB1ENR = RCC_APB1ENR_PWREN;
/* PWR initialization.*/
PWR->CR = STM32_VOS;
while ((PWR->CSR & PWR_CSR_VOSRDY) == 0)
; /* Waits until power regulator is stable. */
/* Initial clocks setup and wait for HSI stabilization, the MSI clock is
always enabled because it is the fallback clock when PLL the fails.*/
RCC->CR |= RCC_CR_HSION;
while ((RCC->CR & RCC_CR_HSIRDY) == 0)
; /* Waits until HSI is stable. */
#if STM32_HSE_ENABLED
/* HSE activation.*/
RCC->CR |= RCC_CR_HSEON;
while ((RCC->CR & RCC_CR_HSERDY) == 0)
; /* Waits until HSE is stable. */
#endif
#if STM32_LSI_ENABLED
/* LSI activation.*/
RCC->CSR |= RCC_CSR_LSION;
while ((RCC->CSR & RCC_CSR_LSIRDY) == 0)
; /* Waits until LSI is stable. */
#endif
#if STM32_LSE_ENABLED
/* LSE activation, have to unlock the register.*/
if ((RCC->BDCR & RCC_BDCR_LSEON) == 0) {
PWR->CR |= PWR_CR_DBP;
RCC->BDCR |= RCC_BDCR_LSEON;
PWR->CR &= ~PWR_CR_DBP;
}
while ((RCC->BDCR & RCC_BDCR_LSERDY) == 0)
; /* Waits until LSE is stable. */
#endif
#if STM32_ACTIVATE_PLL
/* PLL activation.*/
RCC->PLLCFGR = STM32_PLLQ | STM32_PLLSRC | STM32_PLLP | STM32_PLLN | STM32_PLLM;
RCC->CR |= RCC_CR_PLLON;
while (!(RCC->CR & RCC_CR_PLLRDY))
; /* Waits until PLL is stable. */
#endif
#if STM32_ACTIVATE_PLLI2S
/* PLLI2S activation.*/
RCC->PLLI2SCFGR = STM32_PLLI2SR_VALUE | STM32_PLLI2SN_VALUE;
RCC->CR |= RCC_CR_PLLI2SON;
while (!(RCC->CR & RCC_CR_PLLI2SRDY))
; /* Waits until PLLI2S is stable. */
#endif
/* Other clock-related settings (dividers, MCO etc).*/
RCC->CFGR |= STM32_MCO2PRE | STM32_MCO2SEL | STM32_MCO1PRE | STM32_MCO1SEL |
STM32_RTCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE;
/* Flash setup.*/
FLASH->ACR = FLASH_ACR_PRFTEN | FLASH_ACR_ICEN | FLASH_ACR_DCEN |
STM32_FLASHBITS;
/* Switching to the configured clock source if it is different from MSI.*/
#if (STM32_SW != STM32_SW_HSI)
RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */
while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
;
#endif
#endif /* STM32_NO_INIT */
/* SYSCFG clock enabled here because it is a multi-functional unit shared
among multiple drivers.*/
rccEnableAPB2(RCC_APB2ENR_SYSCFGEN, TRUE);
}
/** @} */
|
