1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
|
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file STM32/uart_lld.c
* @brief STM32 low level UART driver code.
*
* @addtogroup UART
* @{
*/
#include "ch.h"
#include "hal.h"
#if CH_HAL_USE_UART || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/** @brief USART1 UART driver identifier.*/
#if STM32_UART_USE_USART1 || defined(__DOXYGEN__)
UARTDriver UARTD1;
#endif
/** @brief USART2 UART driver identifier.*/
#if STM32_UART_USE_USART2 || defined(__DOXYGEN__)
UARTDriver UARTD2;
#endif
/** @brief USART3 UART driver identifier.*/
#if STM32_UART_USE_USART3 || defined(__DOXYGEN__)
UARTDriver UARTD3;
#endif
/*===========================================================================*/
/* Driver local variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief Status bits translation.
*
* @param[in] sr USART SR register value
*
* @return The error flags.
*/
static uartflags_t translate_errors(uint16_t sr) {
uartflags_t sts = 0;
if (sr & USART_SR_ORE)
sts |= UART_OVERRUN_ERROR;
if (sr & USART_SR_PE)
sts |= UART_PARITY_ERROR;
if (sr & USART_SR_FE)
sts |= UART_FRAMING_ERROR;
if (sr & USART_SR_NE)
sts |= UART_NOISE_ERROR;
if (sr & USART_SR_LBD)
sts |= UART_BREAK_DETECTED;
return sts;
}
/**
* @brief Puts the receiver in the UART_RX_IDLE state.
*
* @param[in] uartp pointer to the @p UARTDriver object
*/
static void set_rx_idle_loop(UARTDriver *uartp) {
uint32_t ccr;
/* RX DMA channel preparation, if the char callback is defined then the
TCIE interrupt is enabled too.*/
if (uartp->ud_config->uc_rxchar == NULL)
ccr = DMA_CCR1_CIRC | DMA_CCR1_TEIE;
else
ccr = DMA_CCR1_CIRC | DMA_CCR1_TEIE | DMA_CCR1_TCIE;
dmaSetupChannel(uartp->ud_dmap, uartp->ud_dmarx, 1,
&uartp->ud_rxbuf, uartp->ud_dmaccr | ccr);
dmaEnableChannel(uartp->ud_dmap, uartp->ud_dmarx);
}
/**
* @brief USART de-initialization.
* @details This function must be invoked with interrupts disabled.
*
* @param[in] uartp pointer to the @p UARTDriver object
*/
static void usart_stop(UARTDriver *uartp) {
/* Stops RX and TX DMA channels.*/
dmaDisableChannel(uartp->ud_dmap, uartp->ud_dmarx);
dmaDisableChannel(uartp->ud_dmap, uartp->ud_dmatx);
dmaClearChannel(uartp->ud_dmap, uartp->ud_dmarx);
dmaClearChannel(uartp->ud_dmap, uartp->ud_dmatx);
/* Stops USART operations.*/
uartp->ud_usart->CR1 = 0;
uartp->ud_usart->CR2 = 0;
uartp->ud_usart->CR3 = 0;
}
/**
* @brief USART initialization.
* @details This function must be invoked with interrupts disabled.
*
* @param[in] uartp pointer to the @p UARTDriver object
*/
static void usart_start(UARTDriver *uartp) {
uint16_t cr1;
USART_TypeDef *u = uartp->ud_usart;
/* Defensive programming, starting from a clean state.*/
usart_stop(uartp);
/* Baud rate setting.*/
if (uartp->ud_usart == USART1)
u->BRR = STM32_PCLK2 / uartp->ud_config->uc_speed;
else
u->BRR = STM32_PCLK1 / uartp->ud_config->uc_speed;
/* Resetting eventual pending status flags.*/
(void)u->SR; /* SR reset step 1.*/
(void)u->DR; /* SR reset step 2.*/
u->SR = 0;
/* Note that some bits are enforced because required for correct driver
operations.*/
if (uartp->ud_config->uc_txend2 == NULL)
cr1 = USART_CR1_UE | USART_CR1_PEIE | USART_CR1_TE | USART_CR1_RE;
else
cr1 = USART_CR1_UE | USART_CR1_PEIE | USART_CR1_TE | USART_CR1_RE |
USART_CR1_TCIE;
u->CR1 = uartp->ud_config->uc_cr1 | cr1;
u->CR2 = uartp->ud_config->uc_cr2 | USART_CR2_LBDIE;
u->CR3 = uartp->ud_config->uc_cr3 | USART_CR3_DMAT | USART_CR3_DMAR |
USART_CR3_EIE;
/* Starting the receiver idle loop.*/
set_rx_idle_loop(uartp);
}
/**
* @brief RX DMA common service routine.
*
* @param[in] uartp pointer to the @p UARTDriver object
*/
static void serve_rx_end_irq(UARTDriver *uartp) {
uartp->ud_rxstate = UART_RX_COMPLETE;
if (uartp->ud_config->uc_rxend != NULL)
uartp->ud_config->uc_rxend(uartp);
/* If the callback didn't explicitly change state then the receiver
automatically returns to the idle state.*/
if (uartp->ud_rxstate == UART_RX_COMPLETE) {
uartp->ud_rxstate = UART_RX_IDLE;
set_rx_idle_loop(uartp);
}
}
/**
* @brief TX DMA common service routine.
*
* @param[in] uartp pointer to the @p UARTDriver object
*/
static void serve_tx_end_irq(UARTDriver *uartp) {
/* A callback is generated, if enabled, after a completed transfer.*/
uartp->ud_txstate = UART_TX_COMPLETE;
if (uartp->ud_config->uc_txend1 != NULL)
uartp->ud_config->uc_txend1(uartp);
/* If the callback didn't explicitly change state then the transmitter
automatically returns to the idle state.*/
if (uartp->ud_txstate == UART_TX_COMPLETE)
uartp->ud_txstate = UART_TX_IDLE;
}
/**
* @brief USART common service routine.
*
* @param[in] uartp pointer to the @p UARTDriver object
*/
static void serve_usart_irq(UARTDriver *uartp) {
uint16_t sr;
USART_TypeDef *u = uartp->ud_usart;
sr = u->SR; /* SR reset step 1.*/
(void)u->DR; /* SR reset step 2.*/
if (sr & (USART_SR_LBD | USART_SR_ORE | USART_SR_NE |
USART_SR_FE | USART_SR_PE)) {
u->SR = ~USART_SR_LBD;
if (uartp->ud_config->uc_rxerr != NULL)
uartp->ud_config->uc_rxerr(uartp, translate_errors(sr));
}
if (sr & USART_SR_TC) {
u->SR = ~USART_SR_TC;
/* End of transmission, a callback is generated.*/
if (uartp->ud_config->uc_txend2 != NULL)
uartp->ud_config->uc_txend2(uartp);
}
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if STM32_UART_USE_USART1 || defined(__DOXYGEN__)
/**
* @brief USART1 RX DMA interrupt handler (channel 5).
*
* @isr
*/
CH_IRQ_HANDLER(DMA1_Ch5_IRQHandler) {
UARTDriver *uartp;
CH_IRQ_PROLOGUE();
uartp = &UARTD1;
if ((STM32_DMA1->ISR & DMA_ISR_TEIF5) != 0) {
STM32_UART_USART1_DMA_ERROR_HOOK();
}
if (uartp->ud_rxstate == UART_RX_IDLE) {
dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_5);
/* Fast IRQ path, this is why it is not centralized in serve_rx_end_irq().*/
/* Receiver in idle state, a callback is generated, if enabled, for each
received character and then the driver stays in the same state.*/
if (uartp->ud_config->uc_rxchar != NULL)
uartp->ud_config->uc_rxchar(uartp->ud_rxbuf);
}
else {
/* Receiver in active state, a callback is generated, if enabled, after
a completed transfer.*/
dmaDisableChannel(STM32_DMA1, STM32_DMA_CHANNEL_5);
dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_5);
serve_rx_end_irq(uartp);
}
CH_IRQ_EPILOGUE();
}
/**
* @brief USART1 TX DMA interrupt handler (channel 4).
*
* @isr
*/
CH_IRQ_HANDLER(DMA1_Ch4_IRQHandler) {
CH_IRQ_PROLOGUE();
if ((STM32_DMA1->ISR & DMA_ISR_TEIF4) != 0) {
STM32_UART_USART1_DMA_ERROR_HOOK();
}
dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_4);
dmaDisableChannel(STM32_DMA1, STM32_DMA_CHANNEL_4);
serve_tx_end_irq(&UARTD1);
CH_IRQ_EPILOGUE();
}
/**
* @brief USART1 IRQ handler.
*
* @isr
*/
CH_IRQ_HANDLER(USART1_IRQHandler) {
CH_IRQ_PROLOGUE();
serve_usart_irq(&UARTD1);
CH_IRQ_EPILOGUE();
}
#endif /* STM32_UART_USE_USART1 */
#if STM32_UART_USE_USART2 || defined(__DOXYGEN__)
/**
* @brief USART2 RX DMA interrupt handler (channel 6).
*
* @isr
*/
CH_IRQ_HANDLER(DMA1_Ch6_IRQHandler) {
UARTDriver *uartp;
CH_IRQ_PROLOGUE();
uartp = &UARTD2;
if ((STM32_DMA1->ISR & DMA_ISR_TEIF6) != 0) {
STM32_UART_USART2_DMA_ERROR_HOOK();
}
if (uartp->ud_rxstate == UART_RX_IDLE) {
dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_6);
/* Fast IRQ path, this is why it is not centralized in serve_rx_end_irq().*/
/* Receiver in idle state, a callback is generated, if enabled, for each
received character and then the driver stays in the same state.*/
if (uartp->ud_config->uc_rxchar != NULL)
uartp->ud_config->uc_rxchar(uartp, uartp->ud_rxbuf);
}
else {
/* Receiver in active state, a callback is generated, if enabled, after
a completed transfer.*/
dmaDisableChannel(STM32_DMA1, STM32_DMA_CHANNEL_6);
dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_6);
serve_rx_end_irq(uartp);
}
CH_IRQ_EPILOGUE();
}
/**
* @brief USART2 TX DMA interrupt handler (channel 7).
*
* @isr
*/
CH_IRQ_HANDLER(DMA1_Ch7_IRQHandler) {
CH_IRQ_PROLOGUE();
if ((STM32_DMA1->ISR & DMA_ISR_TEIF7) != 0) {
STM32_UART_USART2_DMA_ERROR_HOOK();
}
dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_7);
dmaDisableChannel(STM32_DMA1, STM32_DMA_CHANNEL_7);
serve_tx_end_irq(&UARTD2);
CH_IRQ_EPILOGUE();
}
/**
* @brief USART2 IRQ handler.
*
* @isr
*/
CH_IRQ_HANDLER(USART2_IRQHandler) {
CH_IRQ_PROLOGUE();
serve_usart_irq(&UARTD2);
CH_IRQ_EPILOGUE();
}
#endif /* STM32_UART_USE_USART2 */
#if STM32_UART_USE_USART3 || defined(__DOXYGEN__)
/**
* @brief USART3 RX DMA interrupt handler (channel 3).
*
* @isr
*/
CH_IRQ_HANDLER(DMA1_Ch3_IRQHandler) {
UARTDriver *uartp;
CH_IRQ_PROLOGUE();
uartp = &UARTD3;
if ((STM32_DMA1->ISR & DMA_ISR_TEIF3) != 0) {
STM32_UART_USART1_DMA_ERROR_HOOK();
}
if (uartp->ud_rxstate == UART_RX_IDLE) {
dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_3);
/* Fast IRQ path, this is why it is not centralized in serve_rx_end_irq().*/
/* Receiver in idle state, a callback is generated, if enabled, for each
received character and then the driver stays in the same state.*/
if (uartp->ud_config->uc_rxchar != NULL)
uartp->ud_config->uc_rxchar(uartp->ud_rxbuf);
}
else {
/* Receiver in active state, a callback is generated, if enabled, after
a completed transfer.*/
dmaDisableChannel(STM32_DMA1, STM32_DMA_CHANNEL_3);
dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_3);
serve_rx_end_irq(uartp);
}
CH_IRQ_EPILOGUE();
}
/**
* @brief USART3 TX DMA interrupt handler (channel 2).
*
* @isr
*/
CH_IRQ_HANDLER(DMA1_Ch2_IRQHandler) {
CH_IRQ_PROLOGUE();
if ((STM32_DMA1->ISR & DMA_ISR_TEIF2) != 0) {
STM32_UART_USART1_DMA_ERROR_HOOK();
}
dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_2);
dmaDisableChannel(STM32_DMA1, STM32_DMA_CHANNEL_2);
serve_tx_end_irq(&UARTD3);
CH_IRQ_EPILOGUE();
}
/**
* @brief USART3 IRQ handler.
*
* @isr
*/
CH_IRQ_HANDLER(USART3_IRQHandler) {
CH_IRQ_PROLOGUE();
serve_usart_irq(&UARTD3);
CH_IRQ_EPILOGUE();
}
#endif /* STM32_UART_USE_USART3 */
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level UART driver initialization.
*
* @notapi
*/
void uart_lld_init(void) {
#if STM32_UART_USE_USART1
RCC->APB2RSTR = RCC_APB2RSTR_USART1RST;
RCC->APB2RSTR = 0;
uartObjectInit(&UARTD1);
UARTD1.ud_usart = USART1;
UARTD1.ud_dmap = STM32_DMA1;
UARTD1.ud_dmarx = STM32_DMA_CHANNEL_5;
UARTD1.ud_dmatx = STM32_DMA_CHANNEL_4;
UARTD1.ud_dmaccr = 0;
#endif
#if STM32_UART_USE_USART2
RCC->APB1RSTR = RCC_APB1RSTR_USART2RST;
RCC->APB1RSTR = 0;
uartObjectInit(&UARTD2);
UARTD2.ud_usart = USART2;
UARTD2.ud_dmap = STM32_DMA1;
UARTD2.ud_dmarx = STM32_DMA_CHANNEL_6;
UARTD2.ud_dmatx = STM32_DMA_CHANNEL_7;
UARTD2.ud_dmaccr = 0;
#endif
#if STM32_UART_USE_USART3
RCC->APB1RSTR = RCC_APB1RSTR_USART3RST;
RCC->APB1RSTR = 0;
uartObjectInit(&UARTD3);
UARTD2.ud_usart = USART3;
UARTD2.ud_dmap = STM32_DMA1;
UARTD2.ud_dmarx = STM32_DMA_CHANNEL_3;
UARTD2.ud_dmatx = STM32_DMA_CHANNEL_2;
UARTD2.ud_dmaccr = 0;
#endif
}
/**
* @brief Configures and activates the UART peripheral.
*
* @param[in] uartp pointer to the @p UARTDriver object
*
* @notapi
*/
void uart_lld_start(UARTDriver *uartp) {
if (uartp->ud_state == UART_STOP) {
#if STM32_UART_USE_USART1
if (&UARTD1 == uartp) {
dmaEnable(DMA1_ID); /* NOTE: Must be enabled before the IRQs.*/
NVICEnableVector(USART1_IRQn,
CORTEX_PRIORITY_MASK(STM32_UART_USART1_IRQ_PRIORITY));
NVICEnableVector(DMA1_Channel4_IRQn,
CORTEX_PRIORITY_MASK(STM32_UART_USART1_IRQ_PRIORITY));
NVICEnableVector(DMA1_Channel5_IRQn,
CORTEX_PRIORITY_MASK(STM32_UART_USART1_IRQ_PRIORITY));
RCC->APB2ENR |= RCC_APB2ENR_USART1EN;
}
#endif
#if STM32_UART_USE_USART2
if (&UARTD2 == uartp) {
dmaEnable(DMA1_ID); /* NOTE: Must be enabled before the IRQs.*/
NVICEnableVector(USART2_IRQn,
CORTEX_PRIORITY_MASK(STM32_UART_USART2_IRQ_PRIORITY));
NVICEnableVector(DMA1_Channel6_IRQn,
CORTEX_PRIORITY_MASK(STM32_UART_USART2_IRQ_PRIORITY));
NVICEnableVector(DMA1_Channel7_IRQn,
CORTEX_PRIORITY_MASK(STM32_UART_USART2_IRQ_PRIORITY));
RCC->APB1ENR |= RCC_APB1ENR_USART2EN;
}
#endif
#if STM32_UART_USE_USART3
if (&UARTD3 == uartp) {
dmaEnable(DMA1_ID); /* NOTE: Must be enabled before the IRQs.*/
NVICEnableVector(USART3_IRQn,
CORTEX_PRIORITY_MASK(STM32_UART_USART3_IRQ_PRIORITY));
NVICEnableVector(DMA1_Channel2_IRQn,
CORTEX_PRIORITY_MASK(STM32_UART_USART3_IRQ_PRIORITY));
NVICEnableVector(DMA1_Channel3_IRQn,
CORTEX_PRIORITY_MASK(STM32_UART_USART3_IRQ_PRIORITY));
RCC->APB1ENR |= RCC_APB1ENR_USART3EN;
}
#endif
/* Static DMA setup, the transfer size depends on the USART settings,
it is 16 bits if M=1 and PCE=0 else it is 8 bits.*/
uartp->ud_dmaccr = STM32_UART_USART1_DMA_PRIORITY << 12;
if ((uartp->ud_config->uc_cr1 & (USART_CR1_M | USART_CR1_PCE)) == USART_CR1_M)
uartp->ud_dmaccr |= DMA_CCR1_MSIZE_0 | DMA_CCR1_PSIZE_0;
dmaChannelSetPeripheral(&uartp->ud_dmap->channels[uartp->ud_dmarx],
&uartp->ud_usart->DR);
dmaChannelSetPeripheral(&uartp->ud_dmap->channels[uartp->ud_dmatx],
&uartp->ud_usart->DR);
uartp->ud_rxbuf = 0;
}
uartp->ud_rxstate = UART_RX_IDLE;
uartp->ud_txstate = UART_TX_IDLE;
usart_start(uartp);
}
/**
* @brief Deactivates the UART peripheral.
*
* @param[in] uartp pointer to the @p UARTDriver object
*
* @notapi
*/
void uart_lld_stop(UARTDriver *uartp) {
if (uartp->ud_state == UART_READY) {
usart_stop(uartp);
#if STM32_UART_USE_USART1
if (&UARTD1 == uartp) {
NVICDisableVector(USART1_IRQn);
NVICDisableVector(DMA1_Channel4_IRQn);
NVICDisableVector(DMA1_Channel5_IRQn);
dmaDisable(DMA1_ID);
RCC->APB2ENR &= ~RCC_APB2ENR_USART1EN;
return;
}
#endif
#if STM32_UART_USE_USART2
if (&UARTD2 == uartp) {
NVICDisableVector(USART2_IRQn);
NVICDisableVector(DMA1_Channel6_IRQn);
NVICDisableVector(DMA1_Channel7_IRQn);
dmaDisable(DMA1_ID);
RCC->APB1ENR &= ~RCC_APB1ENR_USART2EN;
return;
}
#endif
#if STM32_UART_USE_USART3
if (&UARTD3 == uartp) {
NVICDisableVector(USART3_IRQn);
NVICDisableVector(DMA1_Channel2_IRQn);
NVICDisableVector(DMA1_Channel3_IRQn);
dmaDisable(DMA1_ID);
RCC->APB1ENR &= ~RCC_APB1ENR_USART3EN;
return;
}
#endif
}
}
/**
* @brief Starts a transmission on the UART peripheral.
* @note The buffers are organized as uint8_t arrays for data sizes below
* or equal to 8 bits else it is organized as uint16_t arrays.
*
* @param[in] uartp pointer to the @p UARTDriver object
* @param[in] n number of data frames to send
* @param[in] txbuf the pointer to the transmit buffer
*
* @notapi
*/
void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf) {
/* TX DMA channel preparation and start.*/
dmaSetupChannel(uartp->ud_dmap, uartp->ud_dmatx, n, txbuf,
uartp->ud_dmaccr | DMA_CCR1_DIR | DMA_CCR1_MINC |
DMA_CCR1_TEIE | DMA_CCR1_TCIE);
dmaEnableChannel(uartp->ud_dmap, uartp->ud_dmatx);
}
/**
* @brief Stops any ongoing transmission.
* @note Stopping a transmission also suppresses the transmission callbacks.
*
* @param[in] uartp pointer to the @p UARTDriver object
*
* @return The number of data frames not transmitted by the
* stopped transmit operation.
*
* @notapi
*/
size_t uart_lld_stop_send(UARTDriver *uartp) {
dmaDisableChannel(uartp->ud_dmap, uartp->ud_dmatx);
dmaClearChannel(uartp->ud_dmap, uartp->ud_dmatx);
return (size_t)uartp->ud_dmap->channels[uartp->ud_dmatx].CNDTR;
}
/**
* @brief Starts a receive operation on the UART peripheral.
* @note The buffers are organized as uint8_t arrays for data sizes below
* or equal to 8 bits else it is organized as uint16_t arrays.
*
* @param[in] uartp pointer to the @p UARTDriver object
* @param[in] n number of data frames to send
* @param[in] rxbuf the pointer to the receive buffer
*
* @notapi
*/
void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf) {
/* Stopping previous activity (idle state).*/
dmaDisableChannel(uartp->ud_dmap, uartp->ud_dmarx);
dmaClearChannel(uartp->ud_dmap, uartp->ud_dmarx);
/* RX DMA channel preparation and start.*/
dmaSetupChannel(uartp->ud_dmap, uartp->ud_dmarx, n, rxbuf,
uartp->ud_dmaccr | DMA_CCR1_MINC |
DMA_CCR1_TEIE | DMA_CCR1_TCIE);
dmaEnableChannel(uartp->ud_dmap, uartp->ud_dmarx);
}
/**
* @brief Stops any ongoing receive operation.
* @note Stopping a receive operation also suppresses the receive callbacks.
*
* @param[in] uartp pointer to the @p UARTDriver object
*
* @return The number of data frames not received by the
* stopped receive operation.
*
* @notapi
*/
size_t uart_lld_stop_receive(UARTDriver *uartp) {
size_t n;
dmaDisableChannel(uartp->ud_dmap, uartp->ud_dmarx);
dmaClearChannel(uartp->ud_dmap, uartp->ud_dmarx);
n = (size_t)uartp->ud_dmap->channels[uartp->ud_dmarx].CNDTR;
set_rx_idle_loop(uartp);
return n;
}
#endif /* CH_HAL_USE_UART */
/** @} */
|