1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
|
/**
* @file STM32/i2c_lld.c
* @brief STM32 I2C subsystem low level driver source. Slave mode not implemented.
* @addtogroup I2C
* @{
*/
#include "ch.h"
#include "hal.h"
#include "i2c_lld.h"
#if HAL_USE_I2C || defined(__DOXYGEN__)
/*===========================================================================*/
/* Datasheet notes. */
/*===========================================================================*/
/**
* From RM0008.pdf
*
* Note:
* When the STOP, START or PEC bit is set, the software must NOT perform
* any write access to I2C_CR1 before this bit is cleared by hardware.
* Otherwise there is a risk of setting a second STOP, START or PEC request.
*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/** @brief I2C1 driver identifier.*/
#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
I2CDriver I2CD1;
#endif
/** @brief I2C2 driver identifier.*/
#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
I2CDriver I2CD2;
#endif
/*===========================================================================*/
/* Driver local variables. */
/*===========================================================================*/
/* Debugging variables */
#if CH_DBG_ENABLE_ASSERTS
static volatile uint16_t dbgSR1 = 0;
static volatile uint16_t dbgSR2 = 0;
static volatile uint16_t dbgCR1 = 0;
static volatile uint16_t dbgCR2 = 0;
#endif /* CH_DBG_ENABLE_ASSERTS */
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/* defines for convenience purpose */
#define txBuffp (i2cp->txbuff_p)
#define rxBuffp (i2cp->rxbuff_p)
/**
* @brief Function for I2C debugging purpose.
* @note Internal use only.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
#if CH_DBG_ENABLE_ASSERTS
void _i2c_unhandled_case(I2CDriver *i2cp){
dbgCR1 = i2cp->id_i2c->CR1;
dbgCR2 = i2cp->id_i2c->CR2;
chDbgAssert((dbgSR1 + dbgSR2) == 0,
"i2c_serve_event_interrupt(), #1",
"unhandled case");
}
#else
#define _i2c_unhandled_case(i2cp)
#endif /* CH_DBG_ENABLE_ASSERTS */
/**
* @brief Return the last event value from I2C status registers.
* @note Internal use only.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
static uint32_t i2c_get_event(I2CDriver *i2cp){
uint16_t regSR1 = i2cp->id_i2c->SR1;
uint16_t regSR2 = i2cp->id_i2c->SR2;
#if CH_DBG_ENABLE_ASSERTS
dbgSR1 = regSR1;
dbgSR2 = regSR2;
#endif /* CH_DBG_ENABLE_ASSERTS */
return (I2C_EV_MASK & (regSR1 | (regSR2 << 16)));
}
/**
* @brief Handle the flags/interrupts.
* @note Internal use only.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
void _i2c_ev6_master_rec_mode_selected(I2CDriver *i2cp){
I2C_TypeDef *dp = i2cp->id_i2c;
switch(i2cp->flags & EV6_SUBEV_MASK) {
case I2C_EV6_3_MASTER_REC_1BTR_MODE_SELECTED: /* only an single byte to receive */
dp->CR1 &= (uint16_t)~I2C_CR1_ACK; /* Clear ACK */
dp->CR1 |= I2C_CR1_STOP; /* Program the STOP */
while(dp->CR1 & I2C_CR1_STOP)
;
break;
case I2C_EV6_1_MASTER_REC_2BTR_MODE_SELECTED: /* only two bytes to receive */
dp->CR1 &= (uint16_t)~I2C_CR1_ACK; /* Clear ACK */
dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; /* Disable the ITBUF in order to have only the BTF interrupt */
break;
default: /* more than 2 bytes to receive */
break;
}
}
/**
* @brief Handle cases of 2 or 3 bytes receiving.
* @note Internal use only.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
void _i2c_ev7_master_rec_byte_qued(I2CDriver *i2cp){
I2C_TypeDef *dp = i2cp->id_i2c;
switch(i2cp->flags & EV7_SUBEV_MASK) {
case I2C_EV7_2_MASTER_REC_3BYTES_TO_PROCESS:
/* Only for case of three bytes to be received.
* DataN-2 and DataN-1 already received. */
dp->CR1 &= (uint16_t)~I2C_CR1_ACK; /* Clear ACK */
*rxBuffp = dp->DR; /* Read the DataN-2. This clear the RXE & BFT flags and launch the DataN exception in the shift register (ending the SCL stretch) */
rxBuffp++;
dp->CR1 |= I2C_CR1_STOP; /* Program the STOP */
*rxBuffp = dp->DR; /* Read the DataN-1 */
rxBuffp++;
i2cp->rxbytes -= 2; /* Decrement the number of readed bytes */
i2cp->flags = 0;
dp->CR2 |= I2C_CR2_ITBUFEN; /* ready for read DataN. Enable interrupt for next (and last) RxNE event*/
while(dp->CR1 & I2C_CR1_STOP)
;
break;
case I2C_EV7_3_MASTER_REC_2BYTES_TO_PROCESS:
/* only for case of two bytes to be received
* DataN-1 and DataN are received */
dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN;
dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
dp->CR1 |= I2C_CR1_STOP; /* Program the STOP */
*rxBuffp = dp->DR; /* Read the DataN-1*/
rxBuffp++;
*rxBuffp = dp->DR; /* Read the DataN*/
i2cp->rxbytes = 0;
i2cp->flags = 0;
_i2c_isr_code(i2cp, i2cp->id_slave_config); /* Portable I2C ISR code defined in the high level driver. */
while(dp->CR1 & I2C_CR1_STOP)
;
break;
case I2C_FLG_MASTER_RECEIVER:
/* Some times in hi load scenarions it is possible to "miss" interrupt
* because STM32 I2C has OR'ed interrupt sources. This case handle that
* scenario. */
if (i2cp->rxbytes > 3){
*rxBuffp = dp->DR;
rxBuffp++;
(i2cp->rxbytes)--;
}
else
_i2c_unhandled_case(i2cp);
break;
default:
_i2c_unhandled_case(i2cp);
break;
}
}
/**
* @brief Main I2C interrupt handler.
* @note Internal use only.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
static void i2c_serve_event_interrupt(I2CDriver *i2cp) {
I2C_TypeDef *dp = i2cp->id_i2c;
switch(i2c_get_event(i2cp)) {
case I2C_EV5_MASTER_MODE_SELECT:
i2cp->flags &= ~I2C_FLG_HEADER_SENT;
dp->DR = i2cp->slave_addr1;
break;
case I2C_EV9_MASTER_ADDR_10BIT:
if(i2cp->flags & I2C_FLG_MASTER_RECEIVER) {
i2cp->slave_addr1 |= 0x01;
i2cp->flags |= I2C_FLG_HEADER_SENT;
}
dp->DR = i2cp->slave_addr2;
break;
/**************************************************************************
* Master Transmitter part
*/
case I2C_EV6_MASTER_TRA_MODE_SELECTED:
if(i2cp->flags & I2C_FLG_HEADER_SENT){
dp->CR1 |= I2C_CR1_START; /* re-send the start in 10-Bit address mode */
break;
}
txBuffp = (uint8_t*)i2cp->txbuf; /* Initialize the transmit buffer pointer */
i2cp->txbytes--;
if(i2cp->txbytes == 0) { /* If no further data to be sent, disable the I2C ITBUF in order to not have a TxE interrupt */
dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
}
dp->DR = *txBuffp; /* EV8_1 write the first data */
txBuffp++;
break;
case I2C_EV8_MASTER_BYTE_TRANSMITTING:
if(i2cp->txbytes > 0) {
i2cp->txbytes--;
if(i2cp->txbytes == 0) { /* If no further data to be sent, disable the ITBUF in order to not have a TxE interrupt */
dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
}
dp->DR = *txBuffp;
txBuffp++;
}
break;
case I2C_EV8_2_MASTER_BYTE_TRANSMITTED:
dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN; /* Disable ITEVT In order to not have again a BTF IT */
if (i2cp->rxbytes == 0){ /* if nothing to read then generate stop */
dp->CR1 |= I2C_CR1_STOP;
_i2c_isr_code(i2cp, i2cp->id_slave_config); /* Portable I2C ISR code defined in the high level driver. */
while(dp->CR1 & I2C_CR1_STOP)
;
}
else{ /* start reading operation */
i2c_lld_master_transceive(i2cp);
}
break;
/**************************************************************************
* Master Receiver part
*/
case I2C_EV6_MASTER_REC_MODE_SELECTED:
_i2c_ev6_master_rec_mode_selected(i2cp);
rxBuffp = i2cp->rxbuf; /* Initialize receive buffer pointer */
break;
case I2C_EV7_MASTER_REC_BYTE_RECEIVED:
if(i2cp->rxbytes > 3) {
*rxBuffp = dp->DR; /* Read the data register */
rxBuffp++;
i2cp->rxbytes--;
if(i2cp->rxbytes == 3){ /* Disable the ITBUF in order to have only the BTF interrupt */
dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
i2cp->flags |= I2C_FLG_3BTR;
}
}
else if (i2cp->rxbytes == 3){ /* Disable the ITBUF in order to have only the BTF interrupt */
dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
i2cp->flags |= I2C_FLG_3BTR;
}
break;
case I2C_EV7_MASTER_REC_BYTE_QUEUED:
_i2c_ev7_master_rec_byte_qued(i2cp);
break;
default: /* only 1 byte must to be read to complete trasfer. Stop already sent to bus. */
chDbgAssert((i2cp->rxbytes) == 1,
"i2c_serve_event_interrupt(), #1",
"more than 1 byte to be received");
*rxBuffp = dp->DR; /* Read the data register */
i2cp->rxbytes = 0;
dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN; /* disable interrupts */
dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
_i2c_isr_code(i2cp, i2cp->id_slave_config); /* Portable I2C ISR code defined in the high level driver.*/
break;
}
}
static void i2c_serve_error_interrupt(I2CDriver *i2cp) {
i2cflags_t flags;
I2C_TypeDef *reg;
reg = i2cp->id_i2c;
flags = I2CD_NO_ERROR;
if(reg->SR1 & I2C_SR1_BERR) { /* Bus error */
reg->SR1 &= ~I2C_SR1_BERR;
flags |= I2CD_BUS_ERROR;
}
if(reg->SR1 & I2C_SR1_ARLO) { /* Arbitration lost */
reg->SR1 &= ~I2C_SR1_ARLO;
flags |= I2CD_ARBITRATION_LOST;
}
if(reg->SR1 & I2C_SR1_AF) { /* Acknowledge fail */
reg->SR1 &= ~I2C_SR1_AF;
reg->CR1 |= I2C_CR1_STOP; /* setting stop bit */
while(i2cp->id_i2c->CR1 & I2C_CR1_STOP)
;
flags |= I2CD_ACK_FAILURE;
}
if(reg->SR1 & I2C_SR1_OVR) { /* Overrun */
reg->SR1 &= ~I2C_SR1_OVR;
flags |= I2CD_OVERRUN;
}
if(reg->SR1 & I2C_SR1_PECERR) { /* PEC error */
reg->SR1 &= ~I2C_SR1_PECERR;
flags |= I2CD_PEC_ERROR;
}
if(reg->SR1 & I2C_SR1_TIMEOUT) { /* SMBus Timeout */
reg->SR1 &= ~I2C_SR1_TIMEOUT;
flags |= I2CD_TIMEOUT;
}
if(reg->SR1 & I2C_SR1_SMBALERT) { /* SMBus alert */
reg->SR1 &= ~I2C_SR1_SMBALERT;
flags |= I2CD_SMB_ALERT;
}
if(flags != I2CD_NO_ERROR) { /* send communication end signal */
chSysLockFromIsr();
i2cAddFlagsI(i2cp, flags);
chSysUnlockFromIsr();
_i2c_isr_err_code(i2cp, i2cp->id_slave_config);
}
}
#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
/**
* @brief I2C1 event interrupt handler.
*/
CH_IRQ_HANDLER(VectorBC) {
CH_IRQ_PROLOGUE();
i2c_serve_event_interrupt(&I2CD1);
CH_IRQ_EPILOGUE();
}
/**
* @brief I2C1 error interrupt handler.
*/
CH_IRQ_HANDLER(VectorC0) {
CH_IRQ_PROLOGUE();
i2c_serve_error_interrupt(&I2CD1);
CH_IRQ_EPILOGUE();
}
#endif
#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
/**
* @brief I2C2 event interrupt handler.
*/
CH_IRQ_HANDLER(VectorC4) {
CH_IRQ_PROLOGUE();
i2c_serve_event_interrupt(&I2CD2);
CH_IRQ_EPILOGUE();
}
/**
* @brief I2C2 error interrupt handler.
*/
CH_IRQ_HANDLER(VectorC8) {
CH_IRQ_PROLOGUE();
i2c_serve_error_interrupt(&I2CD2);
CH_IRQ_EPILOGUE();
}
#endif
/**
* @brief Low level I2C driver initialization.
*/
void i2c_lld_init(void) {
#if STM32_I2C_USE_I2C1
RCC->APB1RSTR = RCC_APB1RSTR_I2C1RST; /* reset I2C 1 */
RCC->APB1RSTR = 0;
i2cObjectInit(&I2CD1);
I2CD1.id_i2c = I2C1;
#endif
#if STM32_I2C_USE_I2C2
RCC->APB1RSTR = RCC_APB1RSTR_I2C2RST; /* reset I2C 2 */
RCC->APB1RSTR = 0;
i2cObjectInit(&I2CD2);
I2CD2.id_i2c = I2C2;
#endif
}
/**
* @brief Configures and activates the I2C peripheral.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*/
void i2c_lld_start(I2CDriver *i2cp) {
if (i2cp->id_state == I2C_STOP) { /* If in stopped state then enables the I2C clock.*/
#if STM32_I2C_USE_I2C1
if (&I2CD1 == i2cp) {
NVICEnableVector(I2C1_EV_IRQn,
CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
NVICEnableVector(I2C1_ER_IRQn,
CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
RCC->APB1ENR |= RCC_APB1ENR_I2C1EN; /* I2C 1 clock enable */
}
#endif
#if STM32_I2C_USE_I2C2
if (&I2CD2 == i2cp) {
NVICEnableVector(I2C2_EV_IRQn,
CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
NVICEnableVector(I2C2_ER_IRQn,
CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
RCC->APB1ENR |= RCC_APB1ENR_I2C2EN; /* I2C 2 clock enable */
}
#endif
}
i2cp->id_i2c->CR1 = I2C_CR1_SWRST; /* reset i2c peripherial */
i2cp->id_i2c->CR1 = 0;
i2c_lld_set_clock(i2cp);
i2c_lld_set_opmode(i2cp);
i2cp->id_i2c->CR1 |= 1; /* enable interface */
}
void i2c_lld_reset(I2CDriver *i2cp){
chDbgCheck((i2cp->id_state == I2C_STOP)||(i2cp->id_state == I2C_READY),
"i2c_lld_reset: invalid state");
RCC->APB1RSTR = RCC_APB1RSTR_I2C1RST; /* reset I2C 1 */
RCC->APB1RSTR = 0;
}
/**
* @brief Set clock speed.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*/
void i2c_lld_set_clock(I2CDriver *i2cp) {
volatile uint16_t regCCR, regCR2, freq, clock_div;
volatile uint16_t pe_bit_saved;
int32_t clock_speed = i2cp->id_config->clock_speed;
i2cdutycycle_t duty = i2cp->id_config->duty_cycle;
chDbgCheck((i2cp != NULL) && (clock_speed > 0) && (clock_speed <= 4000000),
"i2c_lld_set_clock");
/**************************************************************************
* CR2 Configuration
*/
regCR2 = i2cp->id_i2c->CR2; /* Get the I2Cx CR2 value */
regCR2 &= (uint16_t)~I2C_CR2_FREQ; /* Clear frequency FREQ[5:0] bits */
freq = (uint16_t)(STM32_PCLK1 / 1000000); /* Set frequency bits depending on pclk1 value */
chDbgCheck((freq >= 2) && (freq <= 36),
"i2c_lld_set_clock() : Peripheral clock freq. out of range");
regCR2 |= freq;
i2cp->id_i2c->CR2 = regCR2;
/**************************************************************************
* CCR Configuration
*/
pe_bit_saved = (i2cp->id_i2c->CR1 & I2C_CR1_PE);
i2cp->id_i2c->CR1 &= (uint16_t)~I2C_CR1_PE; /* Disable the selected I2C peripheral to configure TRISE */
regCCR = 0; /* Clear F/S, DUTY and CCR[11:0] bits */
clock_div = I2C_CCR_CCR;
if (clock_speed <= 100000) { /* Configure clock_div in standard mode */
chDbgAssert(duty == STD_DUTY_CYCLE,
"i2c_lld_set_clock(), #1",
"Invalid standard mode duty cycle");
clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 2)); /* Standard mode clock_div calculate: Tlow/Thigh = 1/1 */
if (clock_div < 0x04) clock_div = 0x04; /* Test if CCR value is under 0x4, and set the minimum allowed value */
regCCR |= (clock_div & I2C_CCR_CCR); /* Set clock_div value for standard mode */
i2cp->id_i2c->TRISE = freq + 1; /* Set Maximum Rise Time for standard mode */
}
else if(clock_speed <= 400000) { /* Configure clock_div in fast mode */
chDbgAssert((duty == FAST_DUTY_CYCLE_2) ||
(duty == FAST_DUTY_CYCLE_16_9),
"i2c_lld_set_clock(), #2",
"Invalid fast mode duty cycle");
if(duty == FAST_DUTY_CYCLE_2) {
clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 3)); /* Fast mode clock_div calculate: Tlow/Thigh = 2/1 */
}
else if(duty == FAST_DUTY_CYCLE_16_9) {
clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 25)); /* Fast mode clock_div calculate: Tlow/Thigh = 16/9 */
regCCR |= I2C_CCR_DUTY; /* Set DUTY bit */
}
if(clock_div < 0x01) clock_div = 0x01; /* Test if CCR value is under 0x1, and set the minimum allowed value */
regCCR |= (I2C_CCR_FS | (clock_div & I2C_CCR_CCR)); /* Set clock_div value and F/S bit for fast mode*/
i2cp->id_i2c->TRISE = (freq * 300 / 1000) + 1; /* Set Maximum Rise Time for fast mode */
}
chDbgAssert((clock_div <= I2C_CCR_CCR),
"i2c_lld_set_clock(), #3", "Too low clock clock speed selected");
i2cp->id_i2c->CCR = regCCR; /* Write to I2Cx CCR */
i2cp->id_i2c->CR1 |= pe_bit_saved; /* restore the I2C peripheral enabled state */
}
/**
* @brief Set operation mode of I2C hardware.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*/
void i2c_lld_set_opmode(I2CDriver *i2cp) {
i2copmode_t opmode = i2cp->id_config->op_mode;
uint16_t regCR1;
regCR1 = i2cp->id_i2c->CR1; /* Get the I2Cx CR1 value */
switch(opmode){
case OPMODE_I2C:
regCR1 &= (uint16_t)~(I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
break;
case OPMODE_SMBUS_DEVICE:
regCR1 |= I2C_CR1_SMBUS;
regCR1 &= (uint16_t)~(I2C_CR1_SMBTYPE);
break;
case OPMODE_SMBUS_HOST:
regCR1 |= (I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
break;
}
i2cp->id_i2c->CR1 = regCR1; /* Write to I2Cx CR1 */
}
/**
* @brief Set own address.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*/
void i2c_lld_set_own_address(I2CDriver *i2cp) {
/* TODO: dual address mode */
i2cp->id_i2c->OAR1 |= 1 << 14;
if (&(i2cp->id_config->own_addr_10) == NULL){ /* only 7-bit address */
i2cp->id_i2c->OAR1 &= (~I2C_OAR1_ADDMODE);
i2cp->id_i2c->OAR1 |= i2cp->id_config->own_addr_7 << 1;
}
else {
chDbgAssert((i2cp->id_config->own_addr_10 < 1024),
"i2c_lld_set_own_address(), #1", "10-bit address longer then 10 bit")
i2cp->id_i2c->OAR1 |= I2C_OAR1_ADDMODE;
i2cp->id_i2c->OAR1 |= i2cp->id_config->own_addr_10;
}
}
/**
* @brief Deactivates the I2C peripheral.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*/
void i2c_lld_stop(I2CDriver *i2cp) {
if (i2cp->id_state == I2C_READY) { /* If in ready state then disables the I2C clock.*/
#if STM32_I2C_USE_I2C1
if (&I2CD1 == i2cp) {
NVICDisableVector(I2C1_EV_IRQn);
NVICDisableVector(I2C1_ER_IRQn);
RCC->APB1ENR &= ~RCC_APB1ENR_I2C1EN;
}
#endif
#if STM32_I2C_USE_I2C2
if (&I2CD2 == i2cp) {
NVICDisableVector(I2C2_EV_IRQn);
NVICDisableVector(I2C2_ER_IRQn);
RCC->APB1ENR &= ~RCC_APB1ENR_I2C2EN;
}
#endif
}
i2cp->id_state = I2C_STOP;
}
/**
* @brief Transmits data via the I2C bus as master.
*
* @param[in] i2cp pointer to the @p I2CDriver object
* @param[in] slave_addr Slave device address. Bits 0-9 contain slave
* device address. Bit 15 must be set to 1 if 10-bit
* addressing modes used. Otherwise keep it cleared.
* Bits 10-14 unused.
* @param[in] txbuf pointer to the transmit buffer
* @param[in] txbytes number of bytes to be transmitted
* @param[in] rxbuf pointer to the receive buffer
* @param[in] rxbytes number of bytes to be received
*/
void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr,
uint8_t *txbuf, size_t txbytes, uint8_t *rxbuf, size_t rxbytes) {
i2cp->slave_addr = slave_addr;
i2cp->txbytes = txbytes;
i2cp->rxbytes = rxbytes;
i2cp->txbuf = txbuf;
i2cp->rxbuf = rxbuf;
if(slave_addr & 0x8000){ /* 10-bit mode used */
i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006); /* add the two msb of 10-bit address to the header */
i2cp->slave_addr1 |= 0xF0; /* add the header bits with LSB = 0 -> write */
i2cp->slave_addr2 = slave_addr & 0x00FF; /* the remaining 8 bit of 10-bit address */
}
else{
i2cp->slave_addr1 = ((slave_addr <<1) & 0x00FE); /* LSB = 0 -> write */
}
i2cp->flags = 0;
i2cp->errors = 0;
i2cp->id_i2c->CR1 &= ~I2C_CR1_POS;
i2cp->id_i2c->CR1 |= I2C_CR1_START; /* send start bit */
i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN); /* enable ERR, EVT & BUF ITs */
}
/**
* @brief Receives data from the I2C bus.
*
* @param[in] i2cp pointer to the @p I2CDriver object
* @param[in] slave_addr Slave device address. Bits 0-9 contain slave
* device address. Bit 15 must be set to 1 if 10-bit
* addressing modes used. Otherwise keep it cleared.
* Bits 10-14 unused.
* @param[in] rxbuf pointer to the receive buffer
* @param[in] rxbytes number of bytes to be received
*/
void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr,
uint8_t *rxbuf, size_t rxbytes){
chDbgAssert((i2cp->id_i2c->SR1 + i2cp->id_i2c->SR2) == 0,
"i2c_lld_master_receive(), #1",
"some interrupt sources not clear");
i2cp->slave_addr = slave_addr;
i2cp->rxbytes = rxbytes;
i2cp->rxbuf = rxbuf;
if(slave_addr & 0x8000){ /* 10-bit mode used */
i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006); /* add the two msb of 10-bit address to the header */
i2cp->slave_addr1 |= 0xF0; /* add the header bits (the LSB -> 1 will be add to second */
i2cp->slave_addr2 = slave_addr & 0x00FF; /* the remaining 8 bit of 10-bit address */
}
else{
i2cp->slave_addr1 = ((slave_addr <<1) | 0x01); /* LSB = 1 -> receive */
}
i2cp->flags = I2C_FLG_MASTER_RECEIVER;
i2cp->errors = 0;
i2cp->id_i2c->CR1 |= I2C_CR1_ACK; /* acknowledge returned */
i2cp->id_i2c->CR1 &= ~I2C_CR1_POS;
if(i2cp->rxbytes == 1) { /* Only one byte to be received */
i2cp->flags |= I2C_FLG_1BTR;
}
else if(i2cp->rxbytes == 2) { /* Only two bytes to be received */
i2cp->flags |= I2C_FLG_2BTR;
i2cp->id_i2c->CR1 |= I2C_CR1_POS; /* Acknowledge Position */
}
i2cp->id_i2c->CR1 |= I2C_CR1_START; /* send start bit */
i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN); /* enable ERR, EVT & BUF ITs */
}
/**
* @brief Realize read-though-write behavior.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
void i2c_lld_master_transceive(I2CDriver *i2cp){
chDbgAssert((i2cp != NULL) && (i2cp->slave_addr1 != 0) &&\
(i2cp->rxbytes > 0) && (i2cp->rxbuf != NULL),
"i2c_lld_master_transceive(), #1",
"");
i2cp->flags = I2C_FLG_MASTER_RECEIVER;
i2cp->errors = 0;
i2cp->id_i2c->CR1 |= I2C_CR1_ACK; /* acknowledge returned */
i2cp->id_i2c->CR1 &= ~I2C_CR1_POS;
if(i2cp->slave_addr & 0x8000){ /* 10-bit mode used */
i2cp->slave_addr1 = ((i2cp->slave_addr >>7) & 0x0006);/* add the two msb of 10-bit address to the header */
i2cp->slave_addr1 |= 0xF0; /* add the header bits (the LSB -> 1 will be add to second */
i2cp->slave_addr2 = i2cp->slave_addr & 0x00FF; /* the remaining 8 bit of 10-bit address */
}
else{
i2cp->slave_addr1 |= 0x01;
}
if(i2cp->rxbytes == 1) { /* Only one byte to be received */
i2cp->flags |= I2C_FLG_1BTR;
}
else if(i2cp->rxbytes == 2) { /* Only two bytes to be received */
i2cp->flags |= I2C_FLG_2BTR;
i2cp->id_i2c->CR1 |= I2C_CR1_POS; /* Acknowledge Position */
}
i2cp->id_i2c->CR1 |= I2C_CR1_START; /* send start bit */
uint32_t timeout = I2C_START_TIMEOUT;
while((i2cp->id_i2c->CR1 & I2C_CR1_START) && timeout--)
;
chDbgAssert(timeout <= I2C_START_TIMEOUT,
"i2c_lld_master_receive(), #1", "time is out");
i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN); /* enable ERR, EVT & BUF ITs */
}
#undef rxBuffp
#undef txBuffp
#endif /* HAL_USE_I2C */
|