diff options
Diffstat (limited to 'tools/eclipse/config_wizard/resources/gencfg/processors/boards/stm32f3xx')
3 files changed, 488 insertions, 0 deletions
diff --git a/tools/eclipse/config_wizard/resources/gencfg/processors/boards/stm32f3xx/templates/board.c.ftl b/tools/eclipse/config_wizard/resources/gencfg/processors/boards/stm32f3xx/templates/board.c.ftl new file mode 100644 index 000000000..03a4df8c3 --- /dev/null +++ b/tools/eclipse/config_wizard/resources/gencfg/processors/boards/stm32f3xx/templates/board.c.ftl @@ -0,0 +1,133 @@ +[#ftl]
+[#--
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+ --]
+[@pp.dropOutputFile /]
+[#import "/@lib/libutils.ftl" as utils /]
+[#import "/@lib/liblicense.ftl" as license /]
+[@pp.changeOutputFile name="board.c" /]
+/*
+[@license.EmitLicenseAsText /]
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ * This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config =
+{
+ {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+ VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
+ {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+ VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
+ {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+ VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
+ {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+ VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
+ {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+ VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
+ {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+ VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}
+};
+#endif
+
+/**
+ * @brief Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ * and before any other initialization.
+ */
+void __early_init(void) {
+
+ stm32_clock_init();
+[#if doc1.board.board_functions.__early_init[0]??]
+ ${doc1.board.board_functions.__early_init[0]}
+[/#if]
+}
+
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+/**
+ * @brief SDC card detection.
+ */
+bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+[#if doc1.board.board_functions.sdc_lld_is_card_inserted[0]??]
+${doc1.board.board_functions.sdc_lld_is_card_inserted[0]}
+[#else]
+
+ (void)sdcp;
+ /* TODO: Fill the implementation.*/
+ return TRUE;
+[/#if]
+}
+
+/**
+ * @brief SDC card write protection detection.
+ */
+bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) {
+[#if doc1.board.board_functions.sdc_lld_is_write_protected[0]??]
+${doc1.board.board_functions.sdc_lld_is_write_protected[0]}
+[#else]
+
+ (void)sdcp;
+ /* TODO: Fill the implementation.*/
+ return FALSE;
+[/#if]
+}
+#endif /* HAL_USE_SDC */
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief MMC_SPI card detection.
+ */
+bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+[#if doc1.board.board_functions.mmc_lld_is_card_inserted[0]??]
+${doc1.board.board_functions.mmc_lld_is_card_inserted[0]}
+[#else]
+
+ (void)mmcp;
+ /* TODO: Fill the implementation.*/
+ return TRUE;
+[/#if]
+}
+
+/**
+ * @brief MMC_SPI card write protection detection.
+ */
+bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
+[#if doc1.board.board_functions.mmc_lld_is_write_protected[0]??]
+${doc1.board.board_functions.mmc_lld_is_write_protected[0]}
+[#else]
+
+ (void)mmcp;
+ /* TODO: Fill the implementation.*/
+ return FALSE;
+[/#if]
+}
+#endif
+
+/**
+ * @brief Board-specific initialization code.
+ * @todo Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}
diff --git a/tools/eclipse/config_wizard/resources/gencfg/processors/boards/stm32f3xx/templates/board.h.ftl b/tools/eclipse/config_wizard/resources/gencfg/processors/boards/stm32f3xx/templates/board.h.ftl new file mode 100644 index 000000000..da8169026 --- /dev/null +++ b/tools/eclipse/config_wizard/resources/gencfg/processors/boards/stm32f3xx/templates/board.h.ftl @@ -0,0 +1,327 @@ +[#ftl]
+[#--
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+ --]
+[@pp.dropOutputFile /]
+[#import "/@lib/libutils.ftl" as utils /]
+[#import "/@lib/liblicense.ftl" as license /]
+[@pp.changeOutputFile name="board.h" /]
+/*
+[@license.EmitLicenseAsText /]
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for ${doc1.board.board_name[0]} board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_${doc1.board.board_id[0]}
+#define BOARD_NAME "${doc1.board.board_name[0]}"
+
+[#if doc1.board.ethernet_phy[0]??]
+/*
+ * Ethernet PHY type.
+ */
+#define BOARD_PHY_ID ${doc1.board.ethernet_phy.identifier[0]}
+[#if doc1.board.ethernet_phy.bus_type[0]?string == "RMII"]
+#define BOARD_PHY_RMII
+[/#if]
+
+[/#if]
+/*
+ * Board oscillators-related settings.
+[#if doc1.board.clocks.@LSEFrequency[0]?number == 0]
+ * NOTE: LSE not fitted.
+[/#if]
+[#if doc1.board.clocks.@HSEFrequency[0]?number == 0]
+ * NOTE: HSE not fitted.
+[/#if]
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK ${doc1.board.clocks.@LSEFrequency[0]}
+#endif
+
+[#if doc1.board.clocks.@LSEBypass[0]?string == "true"]
+#define STM32_LSE_BYPASS
+
+[/#if]
+#define STM32_LSEDRV (${doc1.board.clocks.@LSEDrive[0]?word_list[0]?number} << 3)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK ${doc1.board.clocks.@HSEFrequency[0]}
+#endif
+
+[#if doc1.board.clocks.@HSEBypass[0]?string == "true"]
+#define STM32_HSE_BYPASS
+
+[/#if]
+/*
+ * MCU type as defined in the ST header file stm32f30x.h.
+ */
+#define STM32F30X
+
+/*
+ * IO pins assignments.
+ */
+[#list doc1.board.ports.* as port]
+ [#assign port_name = port?node_name?upper_case /]
+ [#list port.* as pin]
+ [#assign pin_name = pin?node_name?upper_case /]
+ [#assign name = pin.@ID[0]?string?trim /]
+ [#if name?length == 0]
+ [#assign name = pin_name /]
+ [/#if]
+#define ${(port_name + "_" + name)?right_pad(27, " ")} ${pin_index?string}
+ [/#list]
+
+[/#list]
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
+#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
+#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
+#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
+#define PIN_ODR_LOW(n) (0U << (n))
+#define PIN_ODR_HIGH(n) (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
+#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
+#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
+#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
+#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
+#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2))
+#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2))
+#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2))
+#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
+
+[#list doc1.board.ports.* as port]
+ [#assign port_name = port?node_name?upper_case /]
+/*
+ * ${port_name} setup:
+ *
+ [#-- Generating pin descriptions inside the comment.--]
+ [#list port.* as pin]
+ [#assign pin_name = pin?node_name?upper_case /]
+ [#assign name = pin.@ID[0]?string?trim /]
+ [#if name?length == 0]
+ [#assign name = pin_name /]
+ [/#if]
+ [#assign mode = pin.@Mode[0] /]
+ [#assign type = pin.@Type[0] /]
+ [#assign resistor = pin.@Resistor[0] /]
+ [#assign speed = pin.@Speed[0] /]
+ [#assign alternate = pin.@Alternate[0] /]
+ [#if mode == "Input"]
+ [#assign desc = mode + " " + resistor /]
+ [#elseif mode == "Output"]
+ [#assign desc = mode + " " + type + " " + speed /]
+ [#elseif mode == "Alternate"]
+ [#assign desc = mode + " " + alternate /]
+ [#else]
+ [#assign desc = "Analog" /]
+ [/#if]
+ * P${(port?node_name[4..] + pin_index?string)?right_pad(3, " ")} - ${name?right_pad(26, " ")}(${desc?lower_case}).
+ [/#list]
+ */
+ [#--
+ -- Generating MODER register value.
+ --]
+ [#list port.* as pin]
+ [#assign pin_name = pin?node_name?upper_case /]
+ [#assign name = pin.@ID[0]?string?trim /]
+ [#if name?length == 0]
+ [#assign name = pin_name /]
+ [/#if]
+ [#assign mode = pin.@Mode[0] /]
+ [#if mode == "Input"]
+ [#assign out = "PIN_MODE_INPUT(" + port_name + "_" + name + ")" /]
+ [#elseif mode == "Output"]
+ [#assign out = "PIN_MODE_OUTPUT(" + port_name + "_" + name + ")" /]
+ [#elseif mode == "Alternate"]
+ [#assign out = "PIN_MODE_ALTERNATE(" + port_name + "_" + name + ")" /]
+ [#else]
+ [#assign out = "PIN_MODE_ANALOG(" + port_name + "_" + name + ")" /]
+ [/#if]
+ [#if pin_index == 0]
+ [#assign line = "#define VAL_" + port_name + "_MODER (" + out /]
+ [#else]
+ [#assign line = " " + out /]
+ [/#if]
+ [#if pin_index < 15]
+${(line + " |")?right_pad(76, " ") + "\\"}
+ [#else]
+${line + ")"}
+ [/#if]
+ [/#list]
+ [#--
+ -- Generating OTYPER register value.
+ --]
+ [#list port.* as pin]
+ [#assign pin_name = pin?node_name?upper_case /]
+ [#assign name = pin.@ID[0]?string?trim /]
+ [#if name?length == 0]
+ [#assign name = pin_name /]
+ [/#if]
+ [#assign type = pin.@Type[0] /]
+ [#if type == "PushPull"]
+ [#assign out = "PIN_OTYPE_PUSHPULL(" + port_name + "_" + name + ")" /]
+ [#else]
+ [#assign out = "PIN_OTYPE_OPENDRAIN(" + port_name + "_" + name + ")" /]
+ [/#if]
+ [#if pin_index == 0]
+ [#assign line = "#define VAL_" + port_name + "_OTYPER (" + out /]
+ [#else]
+ [#assign line = " " + out /]
+ [/#if]
+ [#if pin_index < 15]
+${(line + " |")?right_pad(76, " ") + "\\"}
+ [#else]
+${line + ")"}
+ [/#if]
+ [/#list]
+ [#--
+ -- Generating SPEEDR register value.
+ --]
+ [#list port.* as pin]
+ [#assign pin_name = pin?node_name?upper_case /]
+ [#assign name = pin.@ID[0]?string?trim /]
+ [#if name?length == 0]
+ [#assign name = pin_name /]
+ [/#if]
+ [#assign speed = pin.@Speed[0] /]
+ [#if speed == "Minimum"]
+ [#assign out = "PIN_OSPEED_2M(" + port_name + "_" + name + ")" /]
+ [#elseif speed == "Low"]
+ [#assign out = "PIN_OSPEED_25M(" + port_name + "_" + name + ")" /]
+ [#elseif speed == "High"]
+ [#assign out = "PIN_OSPEED_50M(" + port_name + "_" + name + ")" /]
+ [#else]
+ [#assign out = "PIN_OSPEED_100M(" + port_name + "_" + name + ")" /]
+ [/#if]
+ [#if pin_index == 0]
+ [#assign line = "#define VAL_" + port_name + "_OSPEEDR (" + out /]
+ [#else]
+ [#assign line = " " + out /]
+ [/#if]
+ [#if pin_index < 15]
+${(line + " |")?right_pad(76, " ") + "\\"}
+ [#else]
+${line + ")"}
+ [/#if]
+ [/#list]
+ [#--
+ -- Generating PUPDR register value.
+ --]
+ [#list port.* as pin]
+ [#assign pin_name = pin?node_name?upper_case /]
+ [#assign name = pin.@ID[0]?string?trim /]
+ [#if name?length == 0]
+ [#assign name = pin_name /]
+ [/#if]
+ [#assign resistor = pin.@Resistor[0] /]
+ [#if resistor == "Floating"]
+ [#assign out = "PIN_PUPDR_FLOATING(" + port_name + "_" + name + ")" /]
+ [#elseif resistor == "PullUp"]
+ [#assign out = "PIN_PUPDR_PULLUP(" + port_name + "_" + name + ")" /]
+ [#else]
+ [#assign out = "PIN_PUPDR_PULLDOWN(" + port_name + "_" + name + ")" /]
+ [/#if]
+ [#if pin_index == 0]
+ [#assign line = "#define VAL_" + port_name + "_PUPDR (" + out /]
+ [#else]
+ [#assign line = " " + out /]
+ [/#if]
+ [#if pin_index < 15]
+${(line + " |")?right_pad(76, " ") + "\\"}
+ [#else]
+${line + ")"}
+ [/#if]
+ [/#list]
+ [#--
+ -- Generating ODR register value.
+ --]
+ [#list port.* as pin]
+ [#assign pin_name = pin?node_name?upper_case /]
+ [#assign name = pin.@ID[0]?string?trim /]
+ [#if name?length == 0]
+ [#assign name = pin_name /]
+ [/#if]
+ [#assign level = pin.@Level[0] /]
+ [#if level == "Low"]
+ [#assign out = "PIN_ODR_LOW(" + port_name + "_" + name + ")" /]
+ [#else]
+ [#assign out = "PIN_ODR_HIGH(" + port_name + "_" + name + ")" /]
+ [/#if]
+ [#if pin_index == 0]
+ [#assign line = "#define VAL_" + port_name + "_ODR (" + out /]
+ [#else]
+ [#assign line = " " + out /]
+ [/#if]
+ [#if pin_index < 15]
+${(line + " |")?right_pad(76, " ") + "\\"}
+ [#else]
+${line + ")"}
+ [/#if]
+ [/#list]
+ [#--
+ -- Generating AFRx registers values.
+ --]
+ [#list port.* as pin]
+ [#assign pin_name = pin?node_name?upper_case /]
+ [#assign name = pin.@ID[0]?string?trim /]
+ [#if name?length == 0]
+ [#assign name = pin_name /]
+ [/#if]
+ [#assign alternate = pin.@Alternate[0]?trim /]
+ [#assign out = "PIN_AFIO_AF(" + port_name + "_" + name + ", " + alternate + ")" /]
+ [#if pin_index == 0]
+ [#assign line = "#define VAL_" + port_name + "_AFRL (" + out /]
+ [#elseif pin_index == 8]
+ [#assign line = "#define VAL_" + port_name + "_AFRH (" + out /]
+ [#else]
+ [#assign line = " " + out /]
+ [/#if]
+ [#if (pin_index == 7) || (pin_index == 15)]
+${line + ")"}
+ [#else]
+${(line + " |")?right_pad(76, " ") + "\\"}
+ [/#if]
+ [/#list]
+
+[/#list]
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
diff --git a/tools/eclipse/config_wizard/resources/gencfg/processors/boards/stm32f3xx/templates/board.mk.ftl b/tools/eclipse/config_wizard/resources/gencfg/processors/boards/stm32f3xx/templates/board.mk.ftl new file mode 100644 index 000000000..c88471ac3 --- /dev/null +++ b/tools/eclipse/config_wizard/resources/gencfg/processors/boards/stm32f3xx/templates/board.mk.ftl @@ -0,0 +1,28 @@ +[#ftl]
+[#--
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+ --]
+[@pp.dropOutputFile /]
+[#import "/@lib/libutils.ftl" as utils /]
+[@pp.changeOutputFile name="board.mk" /]
+# List of all the board related files.
+BOARDSRC = ${'$'}{CHIBIOS}/boards/${doc1.board.board_id[0]}/board.c
+
+# Required include directories
+BOARDINC = ${'$'}{CHIBIOS}/boards/${doc1.board.board_id[0]}
|