diff options
Diffstat (limited to 'testhal')
23 files changed, 223 insertions, 389 deletions
diff --git a/testhal/ATSAMA5D2/MATRIX/chconf.h b/testhal/ATSAMA5D2/MATRIX/chconf.h index 98659e9c9..468ffe85e 100755 --- a/testhal/ATSAMA5D2/MATRIX/chconf.h +++ b/testhal/ATSAMA5D2/MATRIX/chconf.h @@ -603,13 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-/**
- * @brief Trust zone configuration.
- * @details If enabled the kernel is configured for the secure world
- * and can access specific devices.
- */
-#define CH_CFG_SEC_WORLD TRUE
-
#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/ATSAMA5D2/RTC/chconf.h b/testhal/ATSAMA5D2/RTC/chconf.h index 49b16647b..b1e3841a8 100644 --- a/testhal/ATSAMA5D2/RTC/chconf.h +++ b/testhal/ATSAMA5D2/RTC/chconf.h @@ -603,13 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-/**
- * @brief Trust zone configuration.
- * @details If enabled the kernel is configured for the secure world
- * and can access specific devices.
- */
-#define CH_CFG_SEC_WORLD TRUE
-
#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/ATSAMA5D2/SDMMC/chconf.h b/testhal/ATSAMA5D2/SDMMC/chconf.h index d0f3b0374..3ab41afae 100644 --- a/testhal/ATSAMA5D2/SDMMC/chconf.h +++ b/testhal/ATSAMA5D2/SDMMC/chconf.h @@ -603,13 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-/**
- * @brief Trust zone configuration.
- * @details If enabled the kernel is configured for the secure world
- * and can access specific devices.
- */
-#define CH_CFG_SEC_WORLD TRUE
-
#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/ATSAMA5D2/SECUMOD/chconf.h b/testhal/ATSAMA5D2/SECUMOD/chconf.h index 49b16647b..b1e3841a8 100755 --- a/testhal/ATSAMA5D2/SECUMOD/chconf.h +++ b/testhal/ATSAMA5D2/SECUMOD/chconf.h @@ -603,13 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-/**
- * @brief Trust zone configuration.
- * @details If enabled the kernel is configured for the secure world
- * and can access specific devices.
- */
-#define CH_CFG_SEC_WORLD TRUE
-
#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/ATSAMA5D2/SERIAL/chconf.h b/testhal/ATSAMA5D2/SERIAL/chconf.h index 49b16647b..b1e3841a8 100755 --- a/testhal/ATSAMA5D2/SERIAL/chconf.h +++ b/testhal/ATSAMA5D2/SERIAL/chconf.h @@ -603,13 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-/**
- * @brief Trust zone configuration.
- * @details If enabled the kernel is configured for the secure world
- * and can access specific devices.
- */
-#define CH_CFG_SEC_WORLD TRUE
-
#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/ATSAMA5D2/SPI/chconf.h b/testhal/ATSAMA5D2/SPI/chconf.h index 49b16647b..b1e3841a8 100644 --- a/testhal/ATSAMA5D2/SPI/chconf.h +++ b/testhal/ATSAMA5D2/SPI/chconf.h @@ -603,13 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-/**
- * @brief Trust zone configuration.
- * @details If enabled the kernel is configured for the secure world
- * and can access specific devices.
- */
-#define CH_CFG_SEC_WORLD TRUE
-
#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/ATSAMA5D2/TC/chconf.h b/testhal/ATSAMA5D2/TC/chconf.h index 98659e9c9..468ffe85e 100755 --- a/testhal/ATSAMA5D2/TC/chconf.h +++ b/testhal/ATSAMA5D2/TC/chconf.h @@ -603,13 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-/**
- * @brief Trust zone configuration.
- * @details If enabled the kernel is configured for the secure world
- * and can access specific devices.
- */
-#define CH_CFG_SEC_WORLD TRUE
-
#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/ATSAMA5D2/UART/chconf.h b/testhal/ATSAMA5D2/UART/chconf.h index a279c96f4..522791d24 100644 --- a/testhal/ATSAMA5D2/UART/chconf.h +++ b/testhal/ATSAMA5D2/UART/chconf.h @@ -49,8 +49,7 @@ * @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
-//#define CH_CFG_ST_FREQUENCY 1000 /* periodic tick.*/
-#define CH_CFG_ST_FREQUENCY (83000000 / 32) /* tick-less.*/
+#define CH_CFG_ST_FREQUENCY 10000
/**
* @brief Time intervals data size.
@@ -604,13 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-/**
- * @brief Trust zone configuration.
- * @details If enabled the kernel is configured for the secure world
- * and can access specific devices.
- */
-#define CH_CFG_SEC_WORLD TRUE
-
#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/AVR/MEGA/ADC/chconf.h b/testhal/AVR/MEGA/ADC/chconf.h index 87fc42b29..b61c51e39 100644 --- a/testhal/AVR/MEGA/ADC/chconf.h +++ b/testhal/AVR/MEGA/ADC/chconf.h @@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -428,7 +425,7 @@ * @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
@@ -463,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
diff --git a/testhal/AVR/MEGA/EXT/chconf.h b/testhal/AVR/MEGA/EXT/chconf.h index 87fc42b29..b61c51e39 100644 --- a/testhal/AVR/MEGA/EXT/chconf.h +++ b/testhal/AVR/MEGA/EXT/chconf.h @@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -428,7 +425,7 @@ * @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
@@ -463,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
diff --git a/testhal/AVR/MEGA/GPT/chconf.h b/testhal/AVR/MEGA/GPT/chconf.h index 87fc42b29..b61c51e39 100644 --- a/testhal/AVR/MEGA/GPT/chconf.h +++ b/testhal/AVR/MEGA/GPT/chconf.h @@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -428,7 +425,7 @@ * @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
@@ -463,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
diff --git a/testhal/AVR/MEGA/I2C/chconf.h b/testhal/AVR/MEGA/I2C/chconf.h index 87fc42b29..b61c51e39 100644 --- a/testhal/AVR/MEGA/I2C/chconf.h +++ b/testhal/AVR/MEGA/I2C/chconf.h @@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -428,7 +425,7 @@ * @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
@@ -463,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
diff --git a/testhal/AVR/MEGA/ICU/chconf.h b/testhal/AVR/MEGA/ICU/chconf.h index 87fc42b29..b61c51e39 100644 --- a/testhal/AVR/MEGA/ICU/chconf.h +++ b/testhal/AVR/MEGA/ICU/chconf.h @@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -428,7 +425,7 @@ * @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
@@ -463,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
diff --git a/testhal/AVR/MEGA/PWM/chconf.h b/testhal/AVR/MEGA/PWM/chconf.h index 87fc42b29..b61c51e39 100644 --- a/testhal/AVR/MEGA/PWM/chconf.h +++ b/testhal/AVR/MEGA/PWM/chconf.h @@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -428,7 +425,7 @@ * @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
@@ -463,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
diff --git a/testhal/AVR/MEGA/SPI/chconf.h b/testhal/AVR/MEGA/SPI/chconf.h index 87fc42b29..b61c51e39 100644 --- a/testhal/AVR/MEGA/SPI/chconf.h +++ b/testhal/AVR/MEGA/SPI/chconf.h @@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -428,7 +425,7 @@ * @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
@@ -463,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
diff --git a/testhal/AVR/XMEGA/SERIAL/chconf.h b/testhal/AVR/XMEGA/SERIAL/chconf.h index 04655a3fc..9b4b25770 100644 --- a/testhal/AVR/XMEGA/SERIAL/chconf.h +++ b/testhal/AVR/XMEGA/SERIAL/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -433,14 +430,6 @@ #define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_TRACE CH_DBG_TRACE_MASK_DISABLED
-
-/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
@@ -471,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
@@ -514,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/AVR/XMEGA/TEST-SUITE-OSLIB/chconf.h b/testhal/AVR/XMEGA/TEST-SUITE-OSLIB/chconf.h index 04655a3fc..9b4b25770 100644 --- a/testhal/AVR/XMEGA/TEST-SUITE-OSLIB/chconf.h +++ b/testhal/AVR/XMEGA/TEST-SUITE-OSLIB/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -433,14 +430,6 @@ #define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_TRACE CH_DBG_TRACE_MASK_DISABLED
-
-/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
@@ -471,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
@@ -514,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/AVR/XMEGA/USART/chconf.h b/testhal/AVR/XMEGA/USART/chconf.h index 04655a3fc..9b4b25770 100644 --- a/testhal/AVR/XMEGA/USART/chconf.h +++ b/testhal/AVR/XMEGA/USART/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -433,14 +430,6 @@ #define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_TRACE CH_DBG_TRACE_MASK_DISABLED
-
-/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
@@ -471,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
@@ -514,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/AVR/XMEGA/WDT/chconf.h b/testhal/AVR/XMEGA/WDT/chconf.h index 04655a3fc..9b4b25770 100644 --- a/testhal/AVR/XMEGA/WDT/chconf.h +++ b/testhal/AVR/XMEGA/WDT/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -433,14 +430,6 @@ #define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_TRACE CH_DBG_TRACE_MASK_DISABLED
-
-/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
@@ -471,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
@@ -514,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/AVR/multi/PAL/cfg-arduino_mega/chconf.h b/testhal/AVR/multi/PAL/cfg-arduino_mega/chconf.h index 2f63e6f13..4ecd81a8e 100644 --- a/testhal/AVR/multi/PAL/cfg-arduino_mega/chconf.h +++ b/testhal/AVR/multi/PAL/cfg-arduino_mega/chconf.h @@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -433,14 +430,6 @@ #define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_TRACE CH_DBG_TRACE_MASK_DISABLED
-
-/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
@@ -471,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
@@ -514,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/AVR/multi/PAL/cfg-arduino_mini/chconf.h b/testhal/AVR/multi/PAL/cfg-arduino_mini/chconf.h index 2f63e6f13..4ecd81a8e 100644 --- a/testhal/AVR/multi/PAL/cfg-arduino_mini/chconf.h +++ b/testhal/AVR/multi/PAL/cfg-arduino_mini/chconf.h @@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -433,14 +430,6 @@ #define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_TRACE CH_DBG_TRACE_MASK_DISABLED
-
-/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
@@ -471,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
@@ -514,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/AVR/multi/PAL/cfg-arduino_nano/chconf.h b/testhal/AVR/multi/PAL/cfg-arduino_nano/chconf.h index 2f63e6f13..4ecd81a8e 100644 --- a/testhal/AVR/multi/PAL/cfg-arduino_nano/chconf.h +++ b/testhal/AVR/multi/PAL/cfg-arduino_nano/chconf.h @@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -433,14 +430,6 @@ #define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_TRACE CH_DBG_TRACE_MASK_DISABLED
-
-/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
@@ -471,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
@@ -514,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/AVR/multi/PAL/cfg-arduino_uno/chconf.h b/testhal/AVR/multi/PAL/cfg-arduino_uno/chconf.h index 2f63e6f13..4ecd81a8e 100644 --- a/testhal/AVR/multi/PAL/cfg-arduino_uno/chconf.h +++ b/testhal/AVR/multi/PAL/cfg-arduino_uno/chconf.h @@ -89,9 +89,10 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
@@ -111,15 +112,9 @@ /**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
@@ -190,7 +185,8 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
@@ -265,7 +261,8 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
@@ -433,14 +430,6 @@ #define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_TRACE CH_DBG_TRACE_MASK_DISABLED
-
-/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
@@ -471,12 +460,12 @@ /**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
@@ -514,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
|