diff options
Diffstat (limited to 'testhal')
| -rw-r--r-- | testhal/STM32F0xx/ADC/mcuconf.h | 25 | ||||
| -rw-r--r-- | testhal/STM32F0xx/EXT/mcuconf.h | 27 | ||||
| -rw-r--r-- | testhal/STM32F0xx/IRQ_STORM/mcuconf.h | 25 | ||||
| -rw-r--r-- | testhal/STM32F0xx/PWM-ICU/mcuconf.h | 23 | ||||
| -rw-r--r-- | testhal/STM32F0xx/UART/mcuconf.h | 23 | ||||
| -rw-r--r-- | testhal/STM32F1xx/USB_CDC_F107/.cproject | 50 | ||||
| -rw-r--r-- | testhal/STM32F1xx/USB_CDC_F107/.project | 95 | ||||
| -rw-r--r-- | testhal/STM32F1xx/USB_CDC_F107/Makefile | 209 | ||||
| -rw-r--r-- | testhal/STM32F1xx/USB_CDC_F107/chconf.h | 535 | ||||
| -rw-r--r-- | testhal/STM32F1xx/USB_CDC_F107/halconf.h | 342 | ||||
| -rw-r--r-- | testhal/STM32F1xx/USB_CDC_F107/main.c | 504 | ||||
| -rw-r--r-- | testhal/STM32F1xx/USB_CDC_F107/mcuconf.h | 211 | ||||
| -rw-r--r-- | testhal/STM32F1xx/USB_CDC_F107/readme.txt | 26 |
13 files changed, 2026 insertions, 69 deletions
diff --git a/testhal/STM32F0xx/ADC/mcuconf.h b/testhal/STM32F0xx/ADC/mcuconf.h index 12eba360b..4cda58614 100644 --- a/testhal/STM32F0xx/ADC/mcuconf.h +++ b/testhal/STM32F0xx/ADC/mcuconf.h @@ -32,6 +32,8 @@ * 0...3 Lowest...Highest.
*/
+#define STM32F0xx_MCUCONF
+
/*
* HAL driver system settings.
*/
@@ -80,8 +82,8 @@ * GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 TRUE
-#define STM32_GPT_USE_TIM3 TRUE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
@@ -91,7 +93,7 @@ */
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 TRUE
+#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
@@ -101,7 +103,7 @@ */
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 TRUE
+#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
@@ -110,21 +112,16 @@ /*
* SERIAL driver system settings.
*/
-#define STM32_SERIAL_USE_USART1 TRUE
+#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USE_USART6 FALSE
#define STM32_SERIAL_USART1_PRIORITY 3
#define STM32_SERIAL_USART2_PRIORITY 3
/*
* SPI driver system settings.
*/
-#define STM32_SPI_USE_SPI1 TRUE
-#define STM32_SPI_USE_SPI2 TRUE
-#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
@@ -134,8 +131,8 @@ /*
* UART driver system settings.
*/
-#define STM32_UART_USE_USART1 TRUE
-#define STM32_UART_USE_USART2 TRUE
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 3
#define STM32_UART_USART2_IRQ_PRIORITY 3
#define STM32_UART_USART1_DMA_PRIORITY 0
diff --git a/testhal/STM32F0xx/EXT/mcuconf.h b/testhal/STM32F0xx/EXT/mcuconf.h index 12eba360b..e635e00b3 100644 --- a/testhal/STM32F0xx/EXT/mcuconf.h +++ b/testhal/STM32F0xx/EXT/mcuconf.h @@ -32,6 +32,8 @@ * 0...3 Lowest...Highest.
*/
+#define STM32F0xx_MCUCONF
+
/*
* HAL driver system settings.
*/
@@ -62,7 +64,7 @@ /*
* ADC driver system settings.
*/
-#define STM32_ADC_USE_ADC1 TRUE
+#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_IRQ_PRIORITY 2
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
@@ -80,8 +82,8 @@ * GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 TRUE
-#define STM32_GPT_USE_TIM3 TRUE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
@@ -91,7 +93,7 @@ */
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 TRUE
+#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
@@ -101,7 +103,7 @@ */
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 TRUE
+#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
@@ -110,21 +112,16 @@ /*
* SERIAL driver system settings.
*/
-#define STM32_SERIAL_USE_USART1 TRUE
+#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USE_USART6 FALSE
#define STM32_SERIAL_USART1_PRIORITY 3
#define STM32_SERIAL_USART2_PRIORITY 3
/*
* SPI driver system settings.
*/
-#define STM32_SPI_USE_SPI1 TRUE
-#define STM32_SPI_USE_SPI2 TRUE
-#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
@@ -134,8 +131,8 @@ /*
* UART driver system settings.
*/
-#define STM32_UART_USE_USART1 TRUE
-#define STM32_UART_USE_USART2 TRUE
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 3
#define STM32_UART_USART2_IRQ_PRIORITY 3
#define STM32_UART_USART1_DMA_PRIORITY 0
diff --git a/testhal/STM32F0xx/IRQ_STORM/mcuconf.h b/testhal/STM32F0xx/IRQ_STORM/mcuconf.h index 0ca5f107b..f1e7ab918 100644 --- a/testhal/STM32F0xx/IRQ_STORM/mcuconf.h +++ b/testhal/STM32F0xx/IRQ_STORM/mcuconf.h @@ -32,6 +32,8 @@ * 0...3 Lowest...Highest.
*/
+#define STM32F0xx_MCUCONF
+
/*
* HAL driver system settings.
*/
@@ -62,7 +64,7 @@ /*
* ADC driver system settings.
*/
-#define STM32_ADC_USE_ADC1 TRUE
+#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_IRQ_PRIORITY 2
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
@@ -83,15 +85,15 @@ #define STM32_GPT_USE_TIM2 TRUE
#define STM32_GPT_USE_TIM3 TRUE
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
-#define STM32_GPT_TIM2_IRQ_PRIORITY 1
-#define STM32_GPT_TIM3_IRQ_PRIORITY 3
+#define STM32_GPT_TIM2_IRQ_PRIORITY 2
+#define STM32_GPT_TIM3_IRQ_PRIORITY 2
/*
* ICU driver system settings.
*/
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 TRUE
+#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
@@ -101,7 +103,7 @@ */
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 TRUE
+#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
@@ -112,19 +114,14 @@ */
#define STM32_SERIAL_USE_USART1 TRUE
#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USE_USART6 FALSE
#define STM32_SERIAL_USART1_PRIORITY 3
#define STM32_SERIAL_USART2_PRIORITY 3
/*
* SPI driver system settings.
*/
-#define STM32_SPI_USE_SPI1 TRUE
-#define STM32_SPI_USE_SPI2 TRUE
-#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
@@ -134,8 +131,8 @@ /*
* UART driver system settings.
*/
-#define STM32_UART_USE_USART1 TRUE
-#define STM32_UART_USE_USART2 TRUE
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 3
#define STM32_UART_USART2_IRQ_PRIORITY 3
#define STM32_UART_USART1_DMA_PRIORITY 0
diff --git a/testhal/STM32F0xx/PWM-ICU/mcuconf.h b/testhal/STM32F0xx/PWM-ICU/mcuconf.h index 12eba360b..fc02500bd 100644 --- a/testhal/STM32F0xx/PWM-ICU/mcuconf.h +++ b/testhal/STM32F0xx/PWM-ICU/mcuconf.h @@ -32,6 +32,8 @@ * 0...3 Lowest...Highest.
*/
+#define STM32F0xx_MCUCONF
+
/*
* HAL driver system settings.
*/
@@ -62,7 +64,7 @@ /*
* ADC driver system settings.
*/
-#define STM32_ADC_USE_ADC1 TRUE
+#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_IRQ_PRIORITY 2
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
@@ -80,8 +82,8 @@ * GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 TRUE
-#define STM32_GPT_USE_TIM3 TRUE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
@@ -110,21 +112,16 @@ /*
* SERIAL driver system settings.
*/
-#define STM32_SERIAL_USE_USART1 TRUE
+#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USE_USART6 FALSE
#define STM32_SERIAL_USART1_PRIORITY 3
#define STM32_SERIAL_USART2_PRIORITY 3
/*
* SPI driver system settings.
*/
-#define STM32_SPI_USE_SPI1 TRUE
-#define STM32_SPI_USE_SPI2 TRUE
-#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
@@ -134,8 +131,8 @@ /*
* UART driver system settings.
*/
-#define STM32_UART_USE_USART1 TRUE
-#define STM32_UART_USE_USART2 TRUE
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 3
#define STM32_UART_USART2_IRQ_PRIORITY 3
#define STM32_UART_USART1_DMA_PRIORITY 0
diff --git a/testhal/STM32F0xx/UART/mcuconf.h b/testhal/STM32F0xx/UART/mcuconf.h index 12eba360b..e148ed6bb 100644 --- a/testhal/STM32F0xx/UART/mcuconf.h +++ b/testhal/STM32F0xx/UART/mcuconf.h @@ -32,6 +32,8 @@ * 0...3 Lowest...Highest.
*/
+#define STM32F0xx_MCUCONF
+
/*
* HAL driver system settings.
*/
@@ -62,7 +64,7 @@ /*
* ADC driver system settings.
*/
-#define STM32_ADC_USE_ADC1 TRUE
+#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_IRQ_PRIORITY 2
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
@@ -80,8 +82,8 @@ * GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 TRUE
-#define STM32_GPT_USE_TIM3 TRUE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
@@ -91,7 +93,7 @@ */
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 TRUE
+#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
@@ -101,7 +103,7 @@ */
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 TRUE
+#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
@@ -110,21 +112,16 @@ /*
* SERIAL driver system settings.
*/
-#define STM32_SERIAL_USE_USART1 TRUE
+#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USE_USART6 FALSE
#define STM32_SERIAL_USART1_PRIORITY 3
#define STM32_SERIAL_USART2_PRIORITY 3
/*
* SPI driver system settings.
*/
-#define STM32_SPI_USE_SPI1 TRUE
-#define STM32_SPI_USE_SPI2 TRUE
-#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
diff --git a/testhal/STM32F1xx/USB_CDC_F107/.cproject b/testhal/STM32F1xx/USB_CDC_F107/.cproject new file mode 100644 index 000000000..e5f35ee12 --- /dev/null +++ b/testhal/STM32F1xx/USB_CDC_F107/.cproject @@ -0,0 +1,50 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<?fileVersion 4.0.0?> + +<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> + <storageModule moduleId="org.eclipse.cdt.core.settings"> + <cconfiguration id="0.606206631"> + <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.606206631" moduleId="org.eclipse.cdt.core.settings" name="Default"> + <externalSettings/> + <extensions> + <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + </extensions> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <configuration artifactName="${ProjName}" buildProperties="" description="" id="0.606206631" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg"> + <folderInfo id="0.606206631." name="/" resourcePath=""> + <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1598191217" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain"> + <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1598191217.431912395" name=""/> + <builder id="org.eclipse.cdt.build.core.settings.default.builder.491684214" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="-1" superClass="org.eclipse.cdt.build.core.settings.default.builder"/> + <tool id="org.eclipse.cdt.build.core.settings.holder.libs.1033587510" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/> + <tool id="org.eclipse.cdt.build.core.settings.holder.381416483" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder"> + <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.298564936" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> + </tool> + <tool id="org.eclipse.cdt.build.core.settings.holder.1960988986" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder"> + <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.830442676" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> + </tool> + <tool id="org.eclipse.cdt.build.core.settings.holder.338669585" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder"> + <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1443003658" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> + </tool> + </toolChain> + </folderInfo> + </configuration> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> + </cconfiguration> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <project id="TEST-STM32F1xx-USB_CDC _F107.null.636142167" name="TEST-STM32F1xx-USB_CDC _F107"/> + </storageModule> + <storageModule moduleId="scannerConfiguration"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> + <scannerConfigBuildInfo instanceId="0.606206631"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/> + </scannerConfigBuildInfo> + </storageModule> +</cproject> diff --git a/testhal/STM32F1xx/USB_CDC_F107/.project b/testhal/STM32F1xx/USB_CDC_F107/.project new file mode 100644 index 000000000..cdd1937af --- /dev/null +++ b/testhal/STM32F1xx/USB_CDC_F107/.project @@ -0,0 +1,95 @@ +<?xml version="1.0" encoding="UTF-8"?> +<projectDescription> + <name>TEST-STM32F1xx-USB_CDC_F107</name> + <comment></comment> + <projects> + </projects> + <buildSpec> + <buildCommand> + <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name> + <triggers>clean,full,incremental,</triggers> + <arguments> + <dictionary> + <key>?name?</key> + <value></value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.append_environment</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.autoBuildTarget</key> + <value>all</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.buildArguments</key> + <value>-j</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.buildCommand</key> + <value>make</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.cleanBuildTarget</key> + <value>clean</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.contents</key> + <value>org.eclipse.cdt.make.core.activeConfigSettings</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableAutoBuild</key> + <value>false</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableCleanBuild</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableFullBuild</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.fullBuildTarget</key> + <value>all</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.stopOnError</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key> + <value>true</value> + </dictionary> + </arguments> + </buildCommand> + <buildCommand> + <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name> + <triggers>full,incremental,</triggers> + <arguments> + </arguments> + </buildCommand> + </buildSpec> + <natures> + <nature>org.eclipse.cdt.core.cnature</nature> + <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature> + <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature> + </natures> + <linkedResources> + <link> + <name>board</name> + <type>2</type> + <locationURI>CHIBIOS/boards/OLIMEX_STM32_P107</locationURI> + </link> + <link> + <name>os</name> + <type>2</type> + <locationURI>CHIBIOS/os</locationURI> + </link> + <link> + <name>test</name> + <type>2</type> + <locationURI>CHIBIOS/test</locationURI> + </link> + </linkedResources> +</projectDescription> diff --git a/testhal/STM32F1xx/USB_CDC_F107/Makefile b/testhal/STM32F1xx/USB_CDC_F107/Makefile new file mode 100644 index 000000000..9b861f6d3 --- /dev/null +++ b/testhal/STM32F1xx/USB_CDC_F107/Makefile @@ -0,0 +1,209 @@ +##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+ USE_COPT =
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+ USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+ USE_LINK_GC = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+ USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+ USE_VERBOSE_COMPILE = no
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Enable this if you really want to use the STM FWLib.
+ifeq ($(USE_FWLIB),)
+ USE_FWLIB = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+include $(CHIBIOS)/boards/OLIMEX_STM32_P107/board.mk
+include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform_f105_f107.mk
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk
+include $(CHIBIOS)/os/kernel/kernel.mk
+include $(CHIBIOS)/test/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(PORTLD)/STM32F107xC.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(PORTSRC) \
+ $(KERNSRC) \
+ $(TESTSRC) \
+ $(HALSRC) \
+ $(PLATFORMSRC) \
+ $(BOARDSRC) \
+ $(CHIBIOS)/os/various/shell.c \
+ $(CHIBIOS)/os/various/chprintf.c \
+ main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(PORTASM)
+
+INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
+ $(HALINC) $(PLATFORMINC) $(BOARDINC) \
+ $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU = cortex-m3
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+# runtime support makes code size explode.
+LD = $(TRGT)gcc
+#LD = $(TRGT)g++
+CP = $(TRGT)objcopy
+AS = $(TRGT)gcc -x assembler-with-cpp
+OD = $(TRGT)objdump
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of default section
+#
+
+# List all default C defines here, like -D_DEBUG=1
+DDEFS =
+
+# List all default ASM defines here, like -D_DEBUG=1
+DADEFS =
+
+# List all default directories to look for include files here
+DINCDIR =
+
+# List the default directory to look for the libraries here
+DLIBDIR =
+
+# List all default libraries here
+DLIBS =
+
+#
+# End of default section
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+ifeq ($(USE_FWLIB),yes)
+ include $(CHIBIOS)/ext/stm32lib/stm32lib.mk
+ CSRC += $(STM32SRC)
+ INCDIR += $(STM32INC)
+ USE_OPT += -DUSE_STDPERIPH_DRIVER
+endif
+
+include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk
diff --git a/testhal/STM32F1xx/USB_CDC_F107/chconf.h b/testhal/STM32F1xx/USB_CDC_F107/chconf.h new file mode 100644 index 000000000..290044421 --- /dev/null +++ b/testhal/STM32F1xx/USB_CDC_F107/chconf.h @@ -0,0 +1,535 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
+#define CH_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ *
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ */
+#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
+#define CH_TIME_QUANTUM 20
+#endif
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_USE_MEMCORE.
+ */
+#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
+#define CH_MEMCORE_SIZE 0
+#endif
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread automatically. The application has
+ * then the responsibility to do one of the following:
+ * - Spawn a custom idle thread at priority @p IDLEPRIO.
+ * - Change the main() thread priority to @p IDLEPRIO then enter
+ * an endless loop. In this scenario the @p main() thread acts as
+ * the idle thread.
+ * .
+ * @note Unless an idle thread is spawned the @p main() thread must not
+ * enter a sleep state.
+ */
+#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
+#define CH_NO_IDLE_THREAD FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
+#define CH_OPTIMIZE_SPEED TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
+#define CH_USE_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
+#define CH_USE_WAITEXIT TRUE
+#endif
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
+#define CH_USE_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note Requires @p CH_USE_SEMAPHORES.
+ */
+#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
+#define CH_USE_SEMAPHORES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Atomic semaphore API.
+ * @details If enabled then the semaphores the @p chSemSignalWait() API
+ * is included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_SEMAPHORES.
+ */
+#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
+#define CH_USE_SEMSW TRUE
+#endif
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
+#define CH_USE_MUTEXES TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_MUTEXES.
+ */
+#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
+#define CH_USE_CONDVARS TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_CONDVARS.
+ */
+#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
+#define CH_USE_CONDVARS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
+#define CH_USE_EVENTS TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_EVENTS.
+ */
+#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
+#define CH_USE_EVENTS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
+#define CH_USE_MESSAGES TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note Requires @p CH_USE_MESSAGES.
+ */
+#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
+#define CH_USE_MESSAGES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_SEMAPHORES.
+ */
+#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
+#define CH_USE_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
+#define CH_USE_QUEUES TRUE
+#endif
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
+#define CH_USE_MEMCORE TRUE
+#endif
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
+ * @p CH_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
+#define CH_USE_HEAP TRUE
+#endif
+
+/**
+ * @brief C-runtime allocator.
+ * @details If enabled the the heap allocator APIs just wrap the C-runtime
+ * @p malloc() and @p free() functions.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_USE_HEAP.
+ * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
+ * appropriate documentation.
+ */
+#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
+#define CH_USE_MALLOC_HEAP FALSE
+#endif
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
+#define CH_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_WAITEXIT.
+ * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
+ */
+#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
+#define CH_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ * activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_TRACE TRUE
+#endif
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p Thread structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p TRUE.
+ * @note This debug option is defaulted to TRUE because it is required by
+ * some test cases into the test suite.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
+#define CH_DBG_THREADS_PROFILING TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p Thread structure.
+ */
+#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
+#define THREAD_EXT_FIELDS \
+ /* Add threads custom fields here.*/
+#endif
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
+#define THREAD_EXT_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+#endif
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note It is inserted into lock zone.
+ * @note It is also invoked when the threads simply return in order to
+ * terminate.
+ */
+#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
+#define THREAD_EXT_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+#endif
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
+#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* System halt code here.*/ \
+}
+#endif
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
+#define IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+#endif
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
+#define SYSTEM_TICK_EVENT_HOOK() { \
+ /* System tick event code here.*/ \
+}
+#endif
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define SYSTEM_HALT_HOOK() { \
+ /* System halt code here.*/ \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* _CHCONF_H_ */
+
+/** @} */
diff --git a/testhal/STM32F1xx/USB_CDC_F107/halconf.h b/testhal/STM32F1xx/USB_CDC_F107/halconf.h new file mode 100644 index 000000000..7d1f492f8 --- /dev/null +++ b/testhal/STM32F1xx/USB_CDC_F107/halconf.h @@ -0,0 +1,342 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM TRUE
+#endif
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB TRUE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Block size for MMC transfers.
+ */
+#if !defined(MMC_SECTOR_SIZE) || defined(__DOXYGEN__)
+#define MMC_SECTOR_SIZE 512
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/**
+ * @brief Number of positive insertion queries before generating the
+ * insertion event.
+ */
+#if !defined(MMC_POLLING_INTERVAL) || defined(__DOXYGEN__)
+#define MMC_POLLING_INTERVAL 10
+#endif
+
+/**
+ * @brief Interval, in milliseconds, between insertion queries.
+ */
+#if !defined(MMC_POLLING_DELAY) || defined(__DOXYGEN__)
+#define MMC_POLLING_DELAY 10
+#endif
+
+/**
+ * @brief Uses the SPI polled API for small data transfers.
+ * @details Polled transfers usually improve performance because it
+ * saves two context switches and interrupt servicing. Note
+ * that this option has no effect on large transfers which
+ * are always performed using DMAs/IRQs.
+ */
+#if !defined(MMC_USE_SPI_POLLING) || defined(__DOXYGEN__)
+#define MMC_USE_SPI_POLLING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/testhal/STM32F1xx/USB_CDC_F107/main.c b/testhal/STM32F1xx/USB_CDC_F107/main.c new file mode 100644 index 000000000..b54d2e686 --- /dev/null +++ b/testhal/STM32F1xx/USB_CDC_F107/main.c @@ -0,0 +1,504 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdio.h>
+#include <string.h>
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+#include "usb_cdc.h"
+#include "shell.h"
+#include "chprintf.h"
+
+/*===========================================================================*/
+/* USB related stuff. */
+/*===========================================================================*/
+
+/*
+ * Serial over USB Driver structure.
+ */
+static SerialUSBDriver SDU1;
+
+/*
+ * USB Device Descriptor.
+ */
+static const uint8_t vcom_device_descriptor_data[18] = {
+ USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */
+ 0x02, /* bDeviceClass (CDC). */
+ 0x00, /* bDeviceSubClass. */
+ 0x00, /* bDeviceProtocol. */
+ 0x40, /* bMaxPacketSize. */
+ 0x0483, /* idVendor (ST). */
+ 0x5740, /* idProduct. */
+ 0x0200, /* bcdDevice. */
+ 1, /* iManufacturer. */
+ 2, /* iProduct. */
+ 3, /* iSerialNumber. */
+ 1) /* bNumConfigurations. */
+};
+
+/*
+ * Device Descriptor wrapper.
+ */
+static const USBDescriptor vcom_device_descriptor = {
+ sizeof vcom_device_descriptor_data,
+ vcom_device_descriptor_data
+};
+
+/* Configuration Descriptor tree for a CDC.*/
+static const uint8_t vcom_configuration_descriptor_data[67] = {
+ /* Configuration Descriptor.*/
+ USB_DESC_CONFIGURATION(67, /* wTotalLength. */
+ 0x02, /* bNumInterfaces. */
+ 0x01, /* bConfigurationValue. */
+ 0, /* iConfiguration. */
+ 0xC0, /* bmAttributes (self powered). */
+ 50), /* bMaxPower (100mA). */
+ /* Interface Descriptor.*/
+ USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */
+ 0x00, /* bAlternateSetting. */
+ 0x01, /* bNumEndpoints. */
+ 0x02, /* bInterfaceClass (Communications
+ Interface Class, CDC section
+ 4.2). */
+ 0x02, /* bInterfaceSubClass (Abstract
+ Control Model, CDC section 4.3). */
+ 0x01, /* bInterfaceProtocol (AT commands,
+ CDC section 4.4). */
+ 0), /* iInterface. */
+ /* Header Functional Descriptor (CDC section 5.2.3).*/
+ USB_DESC_BYTE (5), /* bLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header
+ Functional Descriptor. */
+ USB_DESC_BCD (0x0110), /* bcdCDC. */
+ /* Call Management Functional Descriptor. */
+ USB_DESC_BYTE (5), /* bFunctionLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management
+ Functional Descriptor). */
+ USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */
+ USB_DESC_BYTE (0x01), /* bDataInterface. */
+ /* ACM Functional Descriptor.*/
+ USB_DESC_BYTE (4), /* bFunctionLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract
+ Control Management Descriptor). */
+ USB_DESC_BYTE (0x02), /* bmCapabilities. */
+ /* Union Functional Descriptor.*/
+ USB_DESC_BYTE (5), /* bFunctionLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union
+ Functional Descriptor). */
+ USB_DESC_BYTE (0x00), /* bMasterInterface (Communication
+ Class Interface). */
+ USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class
+ Interface). */
+ /* Endpoint 2 Descriptor.*/
+ USB_DESC_ENDPOINT (USB_CDC_INTERRUPT_REQUEST_EP|0x80,
+ 0x03, /* bmAttributes (Interrupt). */
+ 0x0008, /* wMaxPacketSize. */
+ 0xFF), /* bInterval. */
+ /* Interface Descriptor.*/
+ USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */
+ 0x00, /* bAlternateSetting. */
+ 0x02, /* bNumEndpoints. */
+ 0x0A, /* bInterfaceClass (Data Class
+ Interface, CDC section 4.5). */
+ 0x00, /* bInterfaceSubClass (CDC section
+ 4.6). */
+ 0x00, /* bInterfaceProtocol (CDC section
+ 4.7). */
+ 0x00), /* iInterface. */
+ /* Endpoint 3 Descriptor.*/
+ USB_DESC_ENDPOINT (USB_CDC_DATA_AVAILABLE_EP, /* bEndpointAddress.*/
+ 0x02, /* bmAttributes (Bulk). */
+ 0x0040, /* wMaxPacketSize. */
+ 0x00), /* bInterval. */
+ /* Endpoint 1 Descriptor.*/
+ USB_DESC_ENDPOINT (USB_CDC_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/
+ 0x02, /* bmAttributes (Bulk). */
+ 0x0040, /* wMaxPacketSize. */
+ 0x00) /* bInterval. */
+};
+
+/*
+ * Configuration Descriptor wrapper.
+ */
+static const USBDescriptor vcom_configuration_descriptor = {
+ sizeof vcom_configuration_descriptor_data,
+ vcom_configuration_descriptor_data
+};
+
+/*
+ * U.S. English language identifier.
+ */
+static const uint8_t vcom_string0[] = {
+ USB_DESC_BYTE(4), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */
+};
+
+/*
+ * Vendor string.
+ */
+static const uint8_t vcom_string1[] = {
+ USB_DESC_BYTE(38), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
+ 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
+ 'c', 0, 's', 0
+};
+
+/*
+ * Device Description string.
+ */
+static const uint8_t vcom_string2[] = {
+ USB_DESC_BYTE(56), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
+ 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0,
+ 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0,
+ 'o', 0, 'r', 0, 't', 0
+};
+
+/*
+ * Serial Number string.
+ */
+static const uint8_t vcom_string3[] = {
+ USB_DESC_BYTE(8), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ '0' + CH_KERNEL_MAJOR, 0,
+ '0' + CH_KERNEL_MINOR, 0,
+ '0' + CH_KERNEL_PATCH, 0
+};
+
+/*
+ * Strings wrappers array.
+ */
+static const USBDescriptor vcom_strings[] = {
+ {sizeof vcom_string0, vcom_string0},
+ {sizeof vcom_string1, vcom_string1},
+ {sizeof vcom_string2, vcom_string2},
+ {sizeof vcom_string3, vcom_string3}
+};
+
+/*
+ * Handles the GET_DESCRIPTOR callback. All required descriptors must be
+ * handled here.
+ */
+static const USBDescriptor *get_descriptor(USBDriver *usbp,
+ uint8_t dtype,
+ uint8_t dindex,
+ uint16_t lang) {
+
+ (void)usbp;
+ (void)lang;
+ switch (dtype) {
+ case USB_DESCRIPTOR_DEVICE:
+ return &vcom_device_descriptor;
+ case USB_DESCRIPTOR_CONFIGURATION:
+ return &vcom_configuration_descriptor;
+ case USB_DESCRIPTOR_STRING:
+ if (dindex < 4)
+ return &vcom_strings[dindex];
+ }
+ return NULL;
+}
+
+/**
+ * @brief IN EP1 state.
+ */
+static USBInEndpointState ep1instate;
+
+/**
+ * @brief OUT EP1 state.
+ */
+static USBOutEndpointState ep1outstate;
+
+/**
+ * @brief EP1 initialization structure (both IN and OUT).
+ */
+static const USBEndpointConfig ep1config = {
+ USB_EP_MODE_TYPE_BULK,
+ NULL,
+ sduDataTransmitted,
+ sduDataReceived,
+ 0x0040,
+ 0x0040,
+ &ep1instate,
+ &ep1outstate,
+ 1,
+ NULL
+};
+
+/**
+ * @brief IN EP2 state.
+ */
+static USBInEndpointState ep2instate;
+
+/**
+ * @brief EP2 initialization structure (IN only).
+ */
+static const USBEndpointConfig ep2config = {
+ USB_EP_MODE_TYPE_INTR,
+ NULL,
+ sduInterruptTransmitted,
+ NULL,
+ 0x0010,
+ 0x0000,
+ &ep2instate,
+ NULL,
+ 1,
+ NULL
+};
+
+/*
+ * Handles the USB driver global events.
+ */
+static void usb_event(USBDriver *usbp, usbevent_t event) {
+
+ switch (event) {
+ case USB_EVENT_RESET:
+ return;
+ case USB_EVENT_ADDRESS:
+ return;
+ case USB_EVENT_CONFIGURED:
+ chSysLockFromIsr();
+
+ /* Enables the endpoints specified into the configuration.
+ Note, this callback is invoked from an ISR so I-Class functions
+ must be used.*/
+ usbInitEndpointI(usbp, USB_CDC_DATA_REQUEST_EP, &ep1config);
+ usbInitEndpointI(usbp, USB_CDC_INTERRUPT_REQUEST_EP, &ep2config);
+
+ /* Resetting the state of the CDC subsystem.*/
+ sduConfigureHookI(usbp);
+
+ chSysUnlockFromIsr();
+ return;
+ case USB_EVENT_SUSPEND:
+ return;
+ case USB_EVENT_WAKEUP:
+ return;
+ case USB_EVENT_STALLED:
+ return;
+ }
+ return;
+}
+
+/*
+ * USB driver configuration.
+ */
+static const USBConfig usbcfg = {
+ usb_event,
+ get_descriptor,
+ sduRequestsHook,
+ NULL
+};
+
+/*
+ * Serial over USB driver configuration.
+ */
+static const SerialUSBConfig serusbcfg = {
+ &USBD1
+};
+
+/*===========================================================================*/
+/* Command line related. */
+/*===========================================================================*/
+
+#define SHELL_WA_SIZE THD_WA_SIZE(2048)
+#define TEST_WA_SIZE THD_WA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+ size_t n, size;
+
+ (void)argv;
+ if (argc > 0) {
+ chprintf(chp, "Usage: mem\r\n");
+ return;
+ }
+ n = chHeapStatus(NULL, &size);
+ chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus());
+ chprintf(chp, "heap fragments : %u\r\n", n);
+ chprintf(chp, "heap free total : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+ static const char *states[] = {THD_STATE_NAMES};
+ Thread *tp;
+
+ (void)argv;
+ if (argc > 0) {
+ chprintf(chp, "Usage: threads\r\n");
+ return;
+ }
+ chprintf(chp, " addr stack prio refs state time\r\n");
+ tp = chRegFirstThread();
+ do {
+ chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n",
+ (uint32_t)tp, (uint32_t)tp->p_ctx.r13,
+ (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+ states[tp->p_state], (uint32_t)tp->p_time);
+ tp = chRegNextThread(tp);
+ } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+ Thread *tp;
+
+ (void)argv;
+ if (argc > 0) {
+ chprintf(chp, "Usage: test\r\n");
+ return;
+ }
+ tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriority(),
+ TestThread, chp);
+ if (tp == NULL) {
+ chprintf(chp, "out of memory\r\n");
+ return;
+ }
+ chThdWait(tp);
+}
+
+static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) {
+ static uint8_t buf[] =
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+ "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef";
+
+ (void)argv;
+ if (argc > 0) {
+ chprintf(chp, "Usage: write\r\n");
+ return;
+ }
+
+ while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) {
+ chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1);
+ }
+ chprintf(chp, "\r\n\nstopped\r\n");
+}
+
+static const ShellCommand commands[] = {
+ {"mem", cmd_mem},
+ {"threads", cmd_threads},
+ {"test", cmd_test},
+ {"write", cmd_write},
+ {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+ (BaseSequentialStream *)&SDU1,
+ commands
+};
+
+/*===========================================================================*/
+/* Generic code. */
+/*===========================================================================*/
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static WORKING_AREA(waThread1, 128);
+static msg_t Thread1(void *arg) {
+
+ (void)arg;
+ chRegSetThreadName("blinker");
+ while (TRUE) {
+ systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500;
+ palClearPad(IOPORT3, GPIOC_LED_STATUS1);
+ chThdSleepMilliseconds(time);
+ palSetPad(IOPORT3, GPIOC_LED_STATUS1);
+ chThdSleepMilliseconds(time);
+ }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+ Thread *shelltp = NULL;
+
+ /*
+ * System initializations.
+ * - HAL initialization, this also initializes the configured device drivers
+ * and performs the board-specific initializations.
+ * - Kernel initialization, the main() function becomes a thread and the
+ * RTOS is active.
+ */
+ halInit();
+ chSysInit();
+
+ /*
+ * Initializes a serial-over-USB CDC driver.
+ */
+ sduObjectInit(&SDU1);
+ sduStart(&SDU1, &serusbcfg);
+
+ /*
+ * Activates the USB driver and then the USB bus pull-up on D+.
+ * Note, a delay is inserted in order to not have to disconnect the cable
+ * after a reset.
+ */
+ usbDisconnectBus(serusbcfg.usbp);
+ chThdSleepMilliseconds(1000);
+ usbStart(serusbcfg.usbp, &usbcfg);
+ usbConnectBus(serusbcfg.usbp);
+
+ /*
+ * Shell manager initialization.
+ */
+ shellInit();
+
+ /*
+ * Creates the blinker thread.
+ */
+ chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+ /*
+ * Normal main() thread activity, in this demo it does nothing except
+ * sleeping in a loop and check the button state.
+ */
+ while (TRUE) {
+ if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE))
+ shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+ else if (chThdTerminated(shelltp)) {
+ chThdRelease(shelltp); /* Recovers memory of the previous shell. */
+ shelltp = NULL; /* Triggers spawning of a new shell. */
+ }
+ chThdSleepMilliseconds(1000);
+ }
+}
diff --git a/testhal/STM32F1xx/USB_CDC_F107/mcuconf.h b/testhal/STM32F1xx/USB_CDC_F107/mcuconf.h new file mode 100644 index 000000000..a3c88dbc6 --- /dev/null +++ b/testhal/STM32F1xx/USB_CDC_F107/mcuconf.h @@ -0,0 +1,211 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * STM32F107 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F107_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED FALSE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_PREDIV1
+#define STM32_PREDIV1SRC STM32_PREDIV1SRC_PLL2
+#define STM32_PREDIV1_VALUE 5
+#define STM32_PLLMUL_VALUE 9
+#define STM32_PREDIV2_VALUE 5
+#define STM32_PLL2MUL_VALUE 8
+#define STM32_PLL3MUL_VALUE 10
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_OTG_CLOCK_REQUIRED TRUE
+#define STM32_OTGFSPRE STM32_OTGFSPRE_DIV3
+#define STM32_I2S_CLOCK_REQUIRED FALSE
+#define STM32_MCOSEL STM32_MCOSEL_PLL3
+#define STM32_RTCSEL STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_ADC1_IRQ_PRIORITY 6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1 FALSE
+#define STM32_CAN_USE_CAN2 FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+#define STM32_CAN_CAN2_IRQ_PRIORITY 11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM5 FALSE
+#define STM32_GPT_USE_TIM8 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM5_IRQ_PRIORITY 7
+#define STM32_GPT_TIM8_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_I2C1_IRQ_PRIORITY 5
+#define STM32_I2C_I2C2_IRQ_PRIORITY 5
+#define STM32_I2C_I2C1_DMA_PRIORITY 3
+#define STM32_I2C_I2C2_DMA_PRIORITY 3
+#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt()
+#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt()
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM5 FALSE
+#define STM32_ICU_USE_TIM8 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM5_IRQ_PRIORITY 7
+#define STM32_ICU_TIM8_IRQ_PRIORITY 7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 FALSE
+#define STM32_PWM_USE_TIM5 FALSE
+#define STM32_PWM_USE_TIM8 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM5_IRQ_PRIORITY 7
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY 15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USE_USART3 FALSE
+#define STM32_SERIAL_USE_UART4 FALSE
+#define STM32_SERIAL_USE_UART5 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART3_PRIORITY 12
+#define STM32_SERIAL_UART4_PRIORITY 12
+#define STM32_SERIAL_UART5_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt()
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt()
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1 TRUE
+#define STM32_USB_OTG1_IRQ_PRIORITY 14
+#define STM32_USB_OTG1_RX_FIFO_SIZE 512
+#define STM32_USB_OTG_THREAD_PRIO LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE 128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI 0
diff --git a/testhal/STM32F1xx/USB_CDC_F107/readme.txt b/testhal/STM32F1xx/USB_CDC_F107/readme.txt new file mode 100644 index 000000000..43098d8ac --- /dev/null +++ b/testhal/STM32F1xx/USB_CDC_F107/readme.txt @@ -0,0 +1,26 @@ +*****************************************************************************
+** ChibiOS/RT HAL - USB-CDC driver demo for STM32. **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Olimex STM32-P107 board.
+
+** The Demo **
+
+The application demonstrates the use of the STM32 USB (OTG) driver.
+
+** Build Procedure **
+
+The demo has been tested using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+ http://www.st.com
|