1 files changed, 0 insertions, 144 deletions
diff --git a/testhal/STM32F30x/UART/main.c b/testhal/STM32F30x/UART/main.c
deleted file mode 100644
index 9d0bea53c..000000000
--- a/testhal/STM32F30x/UART/main.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-static VirtualTimer vt1, vt2;
-
-static void restart(void *p) {
-
-  (void)p;
-
-  chSysLockFromIsr();
-  uartStartSendI(&UARTD1, 14, "Hello World!\r\n");
-  chSysUnlockFromIsr();
-}
-
-static void ledoff(void *p) {
-
-  (void)p;
-  palClearPad(GPIOE, GPIOE_LED3_RED);
-}
-
-/*
- * This callback is invoked when a transmission buffer has been completely
- * read by the driver.
- */
-static void txend1(UARTDriver *uartp) {
-
-  (void)uartp;
-  palSetPad(GPIOE, GPIOE_LED3_RED);
-}
-
-/*
- * This callback is invoked when a transmission has physically completed.
- */
-static void txend2(UARTDriver *uartp) {
-
-  (void)uartp;
-  palClearPad(GPIOE, GPIOE_LED3_RED);
-  chSysLockFromIsr();
-  if (chVTIsArmedI(&vt1))
-    chVTResetI(&vt1);
-  chVTSetI(&vt1, MS2ST(5000), restart, NULL);
-  chSysUnlockFromIsr();
-}
-
-/*
- * This callback is invoked on a receive error, the errors mask is passed
- * as parameter.
- */
-static void rxerr(UARTDriver *uartp, uartflags_t e) {
-
-  (void)uartp;
-  (void)e;
-}
-
-/*
- * This callback is invoked when a character is received but the application
- * was not ready to receive it, the character is passed as parameter.
- */
-static void rxchar(UARTDriver *uartp, uint16_t c) {
-
-  (void)uartp;
-  (void)c;
-  /* Flashing the LED each time a character is received.*/
-  palSetPad(GPIOE, GPIOE_LED3_RED);
-  chSysLockFromIsr();
-  if (chVTIsArmedI(&vt2))
-    chVTResetI(&vt2);
-  chVTSetI(&vt2, MS2ST(200), ledoff, NULL);
-  chSysUnlockFromIsr();
-}
-
-/*
- * This callback is invoked when a receive buffer has been completely written.
- */
-static void rxend(UARTDriver *uartp) {
-
-  (void)uartp;
-}
-
-/*
- * UART driver configuration structure.
- */
-static UARTConfig uart_cfg_1 = {
-  txend1,
-  txend2,
-  rxend,
-  rxchar,
-  rxerr,
-  38400,
-  0,
-  USART_CR2_LINEN,
-  0
-};
-
-/*
- * Application entry point.
- */
-int main(void) {
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  /*
-   * Activates the serial driver 1, PA9 and PA10 are routed to USART1.
-   */
-  uartStart(&UARTD1, &uart_cfg_1);
-  palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7));       /* USART1 TX.       */
-  palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7));      /* USART1 RX.       */
-
-  /*
-   * Starts the transmission, it will be handled entirely in background.
-   */
-  uartStartSend(&UARTD1, 13, "Starting...\r\n");
-
-  /*
-   * Normal main() thread activity, in this demo it does nothing.
-   */
-  while (TRUE) {
-    chThdSleepMilliseconds(500);
-  }
-}