diff options
Diffstat (limited to 'testhal/STM32/STM32L4xx/WSPI-N25Q128/main.c')
| -rw-r--r-- | testhal/STM32/STM32L4xx/WSPI-N25Q128/main.c | 170 |
1 files changed, 0 insertions, 170 deletions
diff --git a/testhal/STM32/STM32L4xx/WSPI-N25Q128/main.c b/testhal/STM32/STM32L4xx/WSPI-N25Q128/main.c deleted file mode 100644 index ea3afb376..000000000 --- a/testhal/STM32/STM32L4xx/WSPI-N25Q128/main.c +++ /dev/null @@ -1,170 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include <string.h>
-
-#include "ch.h"
-#include "hal.h"
-
-#include "serial_nor.h"
-
-/* 16MB device, 2 cycles delay after NCS.*/
-const WSPIConfig wspicfg1 = {
- NULL,
- STM32_DCR_FSIZE(24) | STM32_DCR_CSHT(1)
-};
-
-wspi_command_t cmd_read_id = {
- .cmd = 0x9E,
- .cfg = WSPI_CFG_CMD_MODE_ONE_LINE |
- WSPI_CFG_ADDR_MODE_NONE |
- WSPI_CFG_ALT_MODE_NONE |
- WSPI_CFG_DATA_MODE_ONE_LINE,
- .addr = 0,
- .alt = 0,
- .dummy = 0
-};
-
-/*
- * Generic buffer.
- */
-uint8_t buffer[2048];
-
-const uint8_t pattern[128] = {
- 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31
-};
-
-SNORDriver snor1;
-
-const SNORConfig snorcfg1 = {
- &WSPID1,
- &wspicfg1
-};
-
-/*
- * LED blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread1, 128);
-static THD_FUNCTION(Thread1, arg) {
-
- (void)arg;
- chRegSetThreadName("blinker");
- while (true) {
- palToggleLine(LINE_LED_GREEN);
- chThdSleepMilliseconds(500);
- palToggleLine(LINE_LED_GREEN);
- chThdSleepMilliseconds(500);
- }
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
- flash_error_t err;
- uint8_t *addr;
-
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
-
- /*
- * LED line as output.
- */
- palSetLineMode(LINE_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL);
-
- /*
- * Creates the blinker thread.
- */
- chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO + 1, Thread1, NULL);
-
- /*
- * Initializing and starting SNOR driver.
- */
- snorObjectInit(&snor1);
- snorStart(&snor1, &snorcfg1);
-
- /* Reading.*/
- err = flashRead(&snor1, 0, 128, buffer);
- if (err != FLASH_NO_ERROR)
- chSysHalt("read error");
-
- /* Erasing the first sector and waiting for completion.*/
- (void) flashStartEraseSector(&snor1, 0);
- err = flashWaitErase((BaseFlash *)&snor1);
- if (err != FLASH_NO_ERROR)
- chSysHalt("erase error");
-
- /* Verifying the erase operation.*/
- err = flashVerifyErase(&snor1, 0);
- if (err != FLASH_NO_ERROR)
- chSysHalt("verify erase error");
-
- /* Programming a pattern.*/
- err = flashProgram(&snor1, 0, 128, pattern);
- if (err != FLASH_NO_ERROR)
- chSysHalt("program error");
-
- /* Verifying the erase operation.*/
- err = flashVerifyErase(&snor1, 0);
- if (err != FLASH_ERROR_VERIFY)
- chSysHalt("verify non-erase error");
-
- /* Memory mapping the device.*/
- snorMemoryMap(&snor1, &addr);
-
- /* Unmapping the device.*/
- snorMemoryUnmap(&snor1);
-
- /* Reading it back.*/
- memset(buffer, 0, 128);
- err = flashRead(&snor1, 16, 128, buffer);
- if (err != FLASH_NO_ERROR)
- chSysHalt("read error");
-
- /* Reading it back.*/
- memset(buffer, 0, 128);
- err = flashRead(&snor1, 0, 128, buffer);
- if (err != FLASH_NO_ERROR)
- chSysHalt("read error");
-
- /* Erasing again.*/
- (void) flashStartEraseSector(&snor1, 0);
- err = flashWaitErase((BaseFlash *)&snor1);
- if (err != FLASH_NO_ERROR)
- chSysHalt("erase error");
-
- /*
- * Normal main() thread activity, in this demo it does nothing.
- */
- while (true) {
- chThdSleepMilliseconds(500);
- }
- return 0;
-}
|