diff options
Diffstat (limited to 'testhal/STM32/STM32F30x/USB_CDC_IAD/main.c')
| -rw-r--r-- | testhal/STM32/STM32F30x/USB_CDC_IAD/main.c | 234 |
1 files changed, 0 insertions, 234 deletions
diff --git a/testhal/STM32/STM32F30x/USB_CDC_IAD/main.c b/testhal/STM32/STM32F30x/USB_CDC_IAD/main.c deleted file mode 100644 index bada16558..000000000 --- a/testhal/STM32/STM32F30x/USB_CDC_IAD/main.c +++ /dev/null @@ -1,234 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include <stdio.h>
-#include <string.h>
-
-#include "ch.h"
-#include "hal.h"
-#include "test.h"
-
-#include "shell.h"
-#include "chprintf.h"
-
-#include "usbcfg.h"
-
-/*
- * DP resistor control is not possible on the STM32F3-Discovery, using stubs
- * for the connection macros.
- */
-#define usb_lld_connect_bus(usbp)
-#define usb_lld_disconnect_bus(usbp)
-
-/*
- * Virtual serial ports over USB.
- */
-SerialUSBDriver SDU1;
-SerialUSBDriver SDU2;
-
-/*===========================================================================*/
-/* Command line related. */
-/*===========================================================================*/
-
-#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048)
-#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256)
-
-static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
- size_t n, size;
-
- (void)argv;
- if (argc > 0) {
- chprintf(chp, "Usage: mem\r\n");
- return;
- }
- n = chHeapStatus(NULL, &size);
- chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
- chprintf(chp, "heap fragments : %u\r\n", n);
- chprintf(chp, "heap free total : %u bytes\r\n", size);
-}
-
-static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
- static const char *states[] = {CH_STATE_NAMES};
- thread_t *tp;
-
- (void)argv;
- if (argc > 0) {
- chprintf(chp, "Usage: threads\r\n");
- return;
- }
- chprintf(chp, " addr stack prio refs state\r\n");
- tp = chRegFirstThread();
- do {
- chprintf(chp, "%08lx %08lx %4lu %4lu %9s %lu\r\n",
- (uint32_t)tp, (uint32_t)tp->p_ctx.r13,
- (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
- states[tp->p_state]);
- tp = chRegNextThread(tp);
- } while (tp != NULL);
-}
-
-static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
- thread_t *tp;
-
- (void)argv;
- if (argc > 0) {
- chprintf(chp, "Usage: test\r\n");
- return;
- }
- tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
- TestThread, chp);
- if (tp == NULL) {
- chprintf(chp, "out of memory\r\n");
- return;
- }
- chThdWait(tp);
-}
-
-static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) {
- static uint8_t buf[] =
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
- "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef";
-
- (void)argv;
- if (argc > 0) {
- chprintf(chp, "Usage: write\r\n");
- return;
- }
-
- while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) {
- chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1);
- }
- chprintf(chp, "\r\n\nstopped\r\n");
-}
-
-static const ShellCommand commands[] = {
- {"mem", cmd_mem},
- {"threads", cmd_threads},
- {"test", cmd_test},
- {"write", cmd_write},
- {NULL, NULL}
-};
-
-static const ShellConfig shell_cfg1 = {
- (BaseSequentialStream *)&SDU1,
- commands
-};
-
-static const ShellConfig shell_cfg2 = {
- (BaseSequentialStream *)&SDU2,
- commands
-};
-
-/*===========================================================================*/
-/* Generic code. */
-/*===========================================================================*/
-
-/*
- * Red LED blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread1, 128);
-static THD_FUNCTION(Thread1, arg) {
-
- (void)arg;
- chRegSetThreadName("blinker");
- while (true) {
- systime_t time = serusbcfg1.usbp->state == USB_ACTIVE ? 250 : 500;
- palClearPad(GPIOE, GPIOE_LED3_RED);
- chThdSleepMilliseconds(time);
- palSetPad(GPIOE, GPIOE_LED3_RED);
- chThdSleepMilliseconds(time);
- }
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
- thread_t *shelltp1 = NULL;
- thread_t *shelltp2 = NULL;
-
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
-
- /*
- * Initializes a serial-over-USB CDC driver.
- */
- sduObjectInit(&SDU1);
- sduStart(&SDU1, &serusbcfg1);
- sduObjectInit(&SDU2);
- sduStart(&SDU2, &serusbcfg2);
-
- /*
- * Activates the USB driver and then the USB bus pull-up on D+.
- * Note, a delay is inserted in order to not have to disconnect the cable
- * after a reset.
- */
- usbDisconnectBus(serusbcfg1.usbp);
- chThdSleepMilliseconds(1500);
- usbStart(serusbcfg1.usbp, &usbcfg);
- usbConnectBus(serusbcfg1.usbp);
-
- /*
- * Shell manager initialization.
- */
- shellInit();
-
- /*
- * Creates the blinker thread.
- */
- chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
-
- /*
- * Normal main() thread activity, in this demo it does nothing except
- * sleeping in a loop and check the button state.
- */
- while (true) {
- if (!shelltp1 && (SDU1.config->usbp->state == USB_ACTIVE))
- shelltp1 = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
- else if (chThdTerminatedX(shelltp1)) {
- chThdRelease(shelltp1); /* Recovers memory of the previous shell. */
- shelltp1 = NULL; /* Triggers spawning of a new shell. */
- }
- if (!shelltp2 && (SDU2.config->usbp->state == USB_ACTIVE))
- shelltp2 = shellCreate(&shell_cfg2, SHELL_WA_SIZE, NORMALPRIO);
- else if (chThdTerminatedX(shelltp2)) {
- chThdRelease(shelltp2); /* Recovers memory of the previous shell. */
- shelltp2 = NULL; /* Triggers spawning of a new shell. */
- }
- chThdSleepMilliseconds(1000);
- }
-}
|