diff options
Diffstat (limited to 'testhal/SPC563Mxx/CAN/mcuconf.h')
-rw-r--r-- | testhal/SPC563Mxx/CAN/mcuconf.h | 88 |
1 files changed, 0 insertions, 88 deletions
diff --git a/testhal/SPC563Mxx/CAN/mcuconf.h b/testhal/SPC563Mxx/CAN/mcuconf.h deleted file mode 100644 index 0fd5790a1..000000000 --- a/testhal/SPC563Mxx/CAN/mcuconf.h +++ /dev/null @@ -1,88 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/*
- * SPC563Mxx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 1...15 Lowest...Highest.
- */
-
-#define SPC563Mxx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define SPC5_NO_INIT FALSE
-#define SPC5_CLK_BYPASS FALSE
-#define SPC5_ALLOW_OVERCLOCK FALSE
-#define SPC5_CLK_PREDIV_VALUE 2
-#define SPC5_CLK_MFD_VALUE 80
-#define SPC5_CLK_RFD SPC5_RFD_DIV4
-#define SPC5_FLASH_BIUCR (BIUCR_BANK1_TOO | \
- BIUCR_MASTER4_PREFETCH | \
- BIUCR_MASTER0_PREFETCH | \
- BIUCR_DPFEN | \
- BIUCR_IPFEN | \
- BIUCR_PFLIM_ON_MISS | \
- BIUCR_BFEN)
-
-/*
- * ADC driver settings.
- */
-#define SPC5_ADC_USE_ADC0_Q0 FALSE
-#define SPC5_ADC_USE_ADC0_Q1 FALSE
-#define SPC5_ADC_USE_ADC0_Q2 FALSE
-#define SPC5_ADC_USE_ADC1_Q3 FALSE
-#define SPC5_ADC_USE_ADC1_Q4 FALSE
-#define SPC5_ADC_USE_ADC1_Q5 FALSE
-#define SPC5_ADC_FIFO0_DMA_PRIO 12
-#define SPC5_ADC_FIFO1_DMA_PRIO 12
-#define SPC5_ADC_FIFO2_DMA_PRIO 12
-#define SPC5_ADC_FIFO3_DMA_PRIO 12
-#define SPC5_ADC_FIFO4_DMA_PRIO 12
-#define SPC5_ADC_FIFO5_DMA_PRIO 12
-#define SPC5_ADC_FIFO0_DMA_IRQ_PRIO 12
-#define SPC5_ADC_FIFO1_DMA_IRQ_PRIO 12
-#define SPC5_ADC_FIFO2_DMA_IRQ_PRIO 12
-#define SPC5_ADC_FIFO3_DMA_IRQ_PRIO 12
-#define SPC5_ADC_FIFO4_DMA_IRQ_PRIO 12
-#define SPC5_ADC_FIFO5_DMA_IRQ_PRIO 12
-#define SPC5_ADC_CR_CLK_PS ADC_CR_CLK_PS(5)
-#define SPC5_ADC_PUDCR {ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE}
-
-/*
- * SERIAL driver system settings.
- */
-#define SPC5_USE_ESCIA TRUE
-#define SPC5_USE_ESCIB FALSE
-#define SPC5_ESCIA_PRIORITY 8
-#define SPC5_ESCIB_PRIORITY 8
-
-/*
- * CAN driver system settings.
- */
-#define SPC5_CAN_USE_FILTERS FALSE
-
-#define SPC5_CAN_USE_FLEXCAN0 TRUE
-#define SPC5_CAN_FLEXCAN0_IRQ_PRIORITY 11
-
-#define SPC5_CAN_USE_FLEXCAN1 FALSE
-#define SPC5_CAN_FLEXCAN1_IRQ_PRIORITY 11
|