diff options
Diffstat (limited to 'testhal/SPC560Pxx/CAN/mcuconf.h')
| -rw-r--r-- | testhal/SPC560Pxx/CAN/mcuconf.h | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/testhal/SPC560Pxx/CAN/mcuconf.h b/testhal/SPC560Pxx/CAN/mcuconf.h deleted file mode 100644 index 4d18be947..000000000 --- a/testhal/SPC560Pxx/CAN/mcuconf.h +++ /dev/null @@ -1,190 +0,0 @@ -/*
- * Licensed under ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/*
- * SPC560Pxx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 1...15 Lowest...Highest.
- */
-
-#define SPC560Pxx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define SPC5_NO_INIT FALSE
-#define SPC5_ALLOW_OVERCLOCK FALSE
-#define SPC5_DISABLE_WATCHDOG TRUE
-#define SPC5_FMPLL0_IDF_VALUE 5
-#define SPC5_FMPLL0_NDIV_VALUE 32
-#define SPC5_FMPLL0_ODF SPC5_FMPLL_ODF_DIV4
-#define SPC5_FMPLL1_IDF_VALUE 5
-#define SPC5_FMPLL1_NDIV_VALUE 60
-#define SPC5_FMPLL1_ODF SPC5_FMPLL_ODF_DIV4
-#define SPC5_AUX0CLK_SRC SPC5_CGM_SS_FMPLL1
-#define SPC5_MCONTROL_DIVIDER_VALUE 2
-#define SPC5_FMPLL1_CLK_DIVIDER_VALUE 2
-#define SPC5_AUX2CLK_SRC SPC5_CGM_SS_FMPLL1
-#define SPC5_SP_CLK_DIVIDER_VALUE 2
-#define SPC5_AUX3CLK_SRC SPC5_CGM_SS_FMPLL1
-#define SPC5_FR_CLK_DIVIDER_VALUE 2
-#define SPC5_ME_ME_BITS (SPC5_ME_ME_RUN1 | \
- SPC5_ME_ME_RUN2 | \
- SPC5_ME_ME_RUN3 | \
- SPC5_ME_ME_HALT0 | \
- SPC5_ME_ME_STOP0)
-#define SPC5_ME_TEST_MC_BITS (SPC5_ME_MC_SYSCLK_IRC | \
- SPC5_ME_MC_IRCON | \
- SPC5_ME_MC_XOSC0ON | \
- SPC5_ME_MC_PLL0ON | \
- SPC5_ME_MC_PLL1ON | \
- SPC5_ME_MC_CFLAON_NORMAL | \
- SPC5_ME_MC_DFLAON_NORMAL | \
- SPC5_ME_MC_MVRON)
-#define SPC5_ME_SAFE_MC_BITS (SPC5_ME_MC_PDO)
-#define SPC5_ME_DRUN_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
- SPC5_ME_MC_IRCON | \
- SPC5_ME_MC_XOSC0ON | \
- SPC5_ME_MC_PLL0ON | \
- SPC5_ME_MC_PLL1ON | \
- SPC5_ME_MC_CFLAON_NORMAL | \
- SPC5_ME_MC_DFLAON_NORMAL | \
- SPC5_ME_MC_MVRON)
-#define SPC5_ME_RUN0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
- SPC5_ME_MC_IRCON | \
- SPC5_ME_MC_XOSC0ON | \
- SPC5_ME_MC_PLL0ON | \
- SPC5_ME_MC_PLL1ON | \
- SPC5_ME_MC_CFLAON_NORMAL | \
- SPC5_ME_MC_DFLAON_NORMAL | \
- SPC5_ME_MC_MVRON)
-#define SPC5_ME_RUN1_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
- SPC5_ME_MC_IRCON | \
- SPC5_ME_MC_XOSC0ON | \
- SPC5_ME_MC_PLL0ON | \
- SPC5_ME_MC_PLL1ON | \
- SPC5_ME_MC_CFLAON_NORMAL | \
- SPC5_ME_MC_DFLAON_NORMAL | \
- SPC5_ME_MC_MVRON)
-#define SPC5_ME_RUN2_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
- SPC5_ME_MC_IRCON | \
- SPC5_ME_MC_XOSC0ON | \
- SPC5_ME_MC_PLL0ON | \
- SPC5_ME_MC_PLL1ON | \
- SPC5_ME_MC_CFLAON_NORMAL | \
- SPC5_ME_MC_DFLAON_NORMAL | \
- SPC5_ME_MC_MVRON)
-#define SPC5_ME_RUN3_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
- SPC5_ME_MC_IRCON | \
- SPC5_ME_MC_XOSC0ON | \
- SPC5_ME_MC_PLL0ON | \
- SPC5_ME_MC_PLL1ON | \
- SPC5_ME_MC_CFLAON_NORMAL | \
- SPC5_ME_MC_DFLAON_NORMAL | \
- SPC5_ME_MC_MVRON)
-#define SPC5_ME_HALT0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
- SPC5_ME_MC_IRCON | \
- SPC5_ME_MC_XOSC0ON | \
- SPC5_ME_MC_PLL0ON | \
- SPC5_ME_MC_PLL1ON | \
- SPC5_ME_MC_CFLAON_NORMAL | \
- SPC5_ME_MC_DFLAON_NORMAL | \
- SPC5_ME_MC_MVRON)
-#define SPC5_ME_STOP0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
- SPC5_ME_MC_IRCON | \
- SPC5_ME_MC_XOSC0ON | \
- SPC5_ME_MC_PLL0ON | \
- SPC5_ME_MC_PLL1ON | \
- SPC5_ME_MC_CFLAON_NORMAL | \
- SPC5_ME_MC_DFLAON_NORMAL | \
- SPC5_ME_MC_MVRON)
-#define SPC5_ME_RUN_PC3_BITS (SPC5_ME_RUN_PC_RUN0 | \
- SPC5_ME_RUN_PC_RUN1 | \
- SPC5_ME_RUN_PC_RUN2 | \
- SPC5_ME_RUN_PC_RUN3)
-#define SPC5_ME_RUN_PC4_BITS (SPC5_ME_RUN_PC_RUN0 | \
- SPC5_ME_RUN_PC_RUN1 | \
- SPC5_ME_RUN_PC_RUN2 | \
- SPC5_ME_RUN_PC_RUN3)
-#define SPC5_ME_RUN_PC5_BITS (SPC5_ME_RUN_PC_RUN0 | \
- SPC5_ME_RUN_PC_RUN1 | \
- SPC5_ME_RUN_PC_RUN2 | \
- SPC5_ME_RUN_PC_RUN3)
-#define SPC5_ME_RUN_PC6_BITS (SPC5_ME_RUN_PC_RUN0 | \
- SPC5_ME_RUN_PC_RUN1 | \
- SPC5_ME_RUN_PC_RUN2 | \
- SPC5_ME_RUN_PC_RUN3)
-#define SPC5_ME_RUN_PC7_BITS (SPC5_ME_RUN_PC_RUN0 | \
- SPC5_ME_RUN_PC_RUN1 | \
- SPC5_ME_RUN_PC_RUN2 | \
- SPC5_ME_RUN_PC_RUN3)
-#define SPC5_ME_LP_PC4_BITS (SPC5_ME_LP_PC_HALT0 | \
- SPC5_ME_LP_PC_STOP0)
-#define SPC5_ME_LP_PC5_BITS (SPC5_ME_LP_PC_HALT0 | \
- SPC5_ME_LP_PC_STOP0)
-#define SPC5_ME_LP_PC6_BITS (SPC5_ME_LP_PC_HALT0 | \
- SPC5_ME_LP_PC_STOP0)
-#define SPC5_ME_LP_PC7_BITS (SPC5_ME_LP_PC_HALT0 | \
- SPC5_ME_LP_PC_STOP0)
-#define SPC5_PIT0_IRQ_PRIORITY 4
-#define SPC5_CLOCK_FAILURE_HOOK() chSysHalt()
-
-/*
- * SERIAL driver system settings.
- */
-#define SPC5_SERIAL_USE_LINFLEX0 TRUE
-#define SPC5_SERIAL_USE_LINFLEX1 TRUE
-#define SPC5_SERIAL_LINFLEX0_PRIORITY 8
-#define SPC5_SERIAL_LINFLEX1_PRIORITY 8
-#define SPC5_SERIAL_LINFLEX0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
- SPC5_ME_PCTL_LP(2))
-#define SPC5_SERIAL_LINFLEX0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
- SPC5_ME_PCTL_LP(0))
-#define SPC5_SERIAL_LINFLEX1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
- SPC5_ME_PCTL_LP(2))
-#define SPC5_SERIAL_LINFLEX1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
- SPC5_ME_PCTL_LP(0))
-
-/*
- * PWM driver system settings.
- */
-#define SPC5_PWM_USE_SMOD0 TRUE
-#define SPC5_PWM_USE_SMOD1 FALSE
-#define SPC5_PWM_USE_SMOD2 FALSE
-#define SPC5_PWM_USE_SMOD3 FALSE
-#define SPC5_PWM_SMOD0_PRIORITY 7
-#define SPC5_PWM_SMOD1_PRIORITY 7
-#define SPC5_PWM_SMOD2_PRIORITY 7
-#define SPC5_PWM_SMOD3_PRIORITY 7
-#define SPC5_PWM_FLEXPWM0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
- SPC5_ME_PCTL_LP(2))
-#define SPC5_PWM_FLEXPWM0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
- SPC5_ME_PCTL_LP(0))
-
-/*
- * CAN driver system settings.
- */
-#define SPC5_CAN_USE_FILTERS TRUE
-
-#define SPC5_CAN_USE_FLEXCAN0 TRUE
-#define SPC5_CAN_FLEXCAN0_IRQ_PRIORITY 11
-#define SPC5_CAN_FLEXCAN0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
- SPC5_ME_PCTL_LP(2))
-#define SPC5_CAN_FLEXCAN0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
- SPC5_ME_PCTL_LP(0))
|