diff options
Diffstat (limited to 'testhal/LPC43xx/IRQ_STORM/mcuconf.h')
| -rw-r--r-- | testhal/LPC43xx/IRQ_STORM/mcuconf.h | 163 |
1 files changed, 0 insertions, 163 deletions
diff --git a/testhal/LPC43xx/IRQ_STORM/mcuconf.h b/testhal/LPC43xx/IRQ_STORM/mcuconf.h deleted file mode 100644 index 956285eb3..000000000 --- a/testhal/LPC43xx/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,163 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * LPC43xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...highest. - * - * LPC base clock sources: - * 0x00 32 kHz oscillator - * 0x01 IRC (default) - * 0x02 ENET_RX_CLK - * 0x03 ENET_TX_CLK - * 0x04 GP_CLKIN - * 0x06 Crystal oscillator - * 0x07 PLL0USB - * 0x08 PLL0AUDIO - * 0x09 PLL1 - * 0x0C IDIVA - * 0x0D IDIVB - * 0x0E IDIVC - * 0x0F IDIVD - * 0x10 IDIVE - */ - -/* - * HAL driver system settings. - */ -#define LPC_XTAL_ENABLE TRUE -#define LPC_PLL1_ENABLE TRUE -#define LPC_PLL1_MUL 17 -#define LPC_PLL1_PREDIV 1 -#define LPC_PLL1_POSTDIV_ENABLE FALSE -#define LPC_PLL1_POSTDIV 2 -#define LPC_PLL0USB_ENABLE FALSE -#define LPC_PLL0AUDIO_ENABLE FALSE -#define LPC_FLASHLESS TRUE - -/* Clock dividers */ -#define LPC_IDIVA_ENABLE FALSE -#define LPC_IDIVA_DIV 1 -#define LPC_IDIVA_SRC 0x09 -#define LPC_IDIVB_ENABLE FALSE -#define LPC_IDIVB_DIV 2 -#define LPC_IDIVB_SRC 0x09 -#define LPC_IDIVC_ENABLE FALSE -#define LPC_IDIVC_DIV 3 -#define LPC_IDIVC_SRC 0x09 -#define LPC_IDIVD_ENABLE FALSE -#define LPC_IDIVD_DIV 1 -#define LPC_IDIVD_SRC 0x09 -#define LPC_IDIVE_ENABLE FALSE -#define LPC_IDIVE_DIV 1 -#define LPC_IDIVE_SRC 0x09 - -/* Base clocks */ -#define LPC_BASE_USB0_CLK_ENABLE FALSE /* Base clock for USB0. */ -#define LPC_BASE_PERIPH_CLK_ENABLE TRUE /* Base clock for Cortex-M0SUB subsystem, SGPIO. */ -#define LPC_BASE_PERIPH_CLK_SRC 0x09 -#define LPC_BASE_USB1_CLK_ENABLE TRUE /* Base clock for USB1. */ -#define LPC_BASE_USB1_CLK_SRC 0x01 -#define LPC_BASE_SPIFI_CLK_ENABLE FALSE /* Base clock for SPIFI. */ -#define LPC_BASE_SPIFI_CLK_SRC 0x0D -#define LPC_BASE_SPI_CLK_ENABLE TRUE /* Base clock for SPI. */ -#define LPC_BASE_SPI_CLK_SRC 0x01 -#define LPC_BASE_PHY_RX_CLK_ENABLE FALSE /* Base clock for Ethernet PHY Receive clock. */ -#define LPC_BASE_PHY_RX_CLK_SRC 0x0E -#define LPC_BASE_PHY_TX_CLK_ENABLE FALSE /* Base clock for Ethernet PHY Transmit clock. */ -#define LPC_BASE_PHY_TX_CLK_SRC 0x0E -#define LPC_BASE_APB1_CLK_ENABLE TRUE /* Base clock for APB1: I2C0, I2S, CAN1. */ -#define LPC_BASE_APB1_CLK_SRC 0x01 -#define LPC_BASE_APB3_CLK_ENABLE TRUE /* Base clock for APB3: I2C1, DAC, ADC0, ADC1, CAN0. */ -#define LPC_BASE_APB3_CLK_SRC 0x09 -#define LPC_BASE_LCD_CLK_ENABLE FALSE /* Base clock for LCD. */ -#define LPC_BASE_LCD_CLK_SRC 0x01 -#define LPC_BASE_SDIO_CLK_ENABLE FALSE /* Base clock for SD/MMC. */ -#define LPC_BASE_SDIO_CLK_SRC 0x01 -#define LPC_BASE_SSP0_CLK_ENABLE TRUE /* Base clock for SSP0. */ -#define LPC_BASE_SSP0_CLK_SRC 0x01 -#define LPC_BASE_SSP1_CLK_ENABLE TRUE /* Base clock for SSP1. */ -#define LPC_BASE_SSP1_CLK_SRC 0x01 -#define LPC_BASE_UART0_CLK_ENABLE TRUE /* Base clock for UART0. */ -#define LPC_BASE_UART0_CLK_SRC 0x01 -#define LPC_BASE_UART1_CLK_ENABLE TRUE /* Base clock for UART1. */ -#define LPC_BASE_UART1_CLK_SRC 0x01 -#define LPC_BASE_UART2_CLK_ENABLE TRUE /* Base clock for UART2. */ -#define LPC_BASE_UART2_CLK_SRC 0x01 -#define LPC_BASE_UART3_CLK_ENABLE TRUE /* Base clock for UART3. */ -#define LPC_BASE_UART3_CLK_SRC 0x01 -#define LPC_BASE_OUT_CLK_ENABLE FALSE /* Base clock for UART0. */ -#define LPC_BASE_OUT_CLK_SRC 0x01 -#define LPC_BASE_APLL_CLK_ENABLE FALSE /* Base clock for audio system. */ -#define LPC_BASE_APLL_CLK_SRC 0x01 -#define LPC_BASE_CGU_OUT0_CLK_ENABLE FALSE /* Base clock for CGU_OUT0 clock output. */ -#define LPC_BASE_CGU_OUT0_CLK_SRC 0x01 -#define LPC_BASE_CGU_OUT1_CLK_ENABLE FALSE /* Base clock for CGU_OUT1 clock output. */ -#define LPC_BASE_CGU_OUT1_CLK_SRC 0x01 - -/* - * GPT driver system settings. - */ -#define LPC_GPT_USE_TIM0 TRUE -#define LPC_GPT_USE_TIM1 TRUE -#define LPC_GPT_USE_TIM2 FALSE -#define LPC_GPT_USE_TIM3 FALSE -#define LPC_GPT_TIM0_IRQ_PRIORITY 2 -#define LPC_GPT_TIM1_IRQ_PRIORITY 2 -#define LPC_GPT_TIM2_IRQ_PRIORITY 2 -#define LPC_GPT_TIM3_IRQ_PRIORITY 2 - -/* - * SERIAL driver system settings. - */ -#define LPC_SERIAL_USE_UART0 FALSE -#define LPC_SERIAL_USE_UART1 FALSE -#define LPC_SERIAL_USE_UART2 FALSE -#define LPC_SERIAL_USE_UART3 TRUE -#define LPC_SERIAL_FIFO_PRELOAD 16 -#define LPC_SERIAL_UART0_IRQ_PRIORITY 3 -#define LPC_SERIAL_UART1_IRQ_PRIORITY 3 -#define LPC_SERIAL_UART2_IRQ_PRIORITY 3 -#define LPC_SERIAL_UART3_IRQ_PRIORITY 3 - -/* - * I2C driver system settings. - */ -#define LPC_I2C_USE_I2C0 FALSE -#define LPC_I2C_USE_I2C1 FALSE -#define LPC_I2C_I2C0_IRQ_PRIORITY 3 -#define LPC_I2C_I2C1_IRQ_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define LPC_SPI_USE_SSP0 FALSE -#define LPC_SPI_USE_SSP1 FALSE -#define LPC_SPI_SSP0_IRQ_PRIORITY 5 -#define LPC_SPI_SSP1_IRQ_PRIORITY 5 - -/* - * RTC driver system settings. - */ -#define LPC_RTC_IS_CALENDAR TRUE -#define LPC_RTC_USE_ALARM TRUE -#define LPC_RTC_IRQ_PRIORITY 3 |